[Feature][T106]ZXW P56U09 code
Only Configure: Yes
Affected branch: master
Affected module: unknow
Is it affected on both ZXIC and MTK: only ZXIC
Self-test: No
Doc Update: No
Change-Id: I3cbd8b420271eb20c2b40ebe5c78f83059cd42f3
diff --git a/ap/lib/libcurl/curl-7.86.0/packages/Android/Android.mk b/ap/lib/libcurl/curl-7.86.0/packages/Android/Android.mk
new file mode 100755
index 0000000..f5093b7
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.86.0/packages/Android/Android.mk
@@ -0,0 +1,133 @@
+#***************************************************************************
+# _ _ ____ _
+# Project ___| | | | _ \| |
+# / __| | | | |_) | |
+# | (__| |_| | _ <| |___
+# \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2022, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+# SPDX-License-Identifier: curl
+#
+###########################################################################
+# Google Android makefile for curl and libcurl
+#
+# This file can be used when building curl using the full Android source
+# release or the NDK. Most users do not want or need to do this; please
+# instead read the Android section in docs/INSTALL for alternate
+# methods.
+#
+# Place the curl source (including this makefile) into external/curl/ in the
+# Android source tree. Then build them with 'make curl' or just 'make libcurl'
+# from the Android root. Tested with Android versions 1.5, 2.1-2.3
+#
+# Note: you must first create a curl_config.h file by running configure in the
+# Android environment. The only way I've found to do this is tricky. Perform a
+# normal Android build with libcurl in the source tree, providing the target
+# "showcommands" to make. The build will eventually fail (because curl_config.h
+# doesn't exist yet), but the compiler commands used to build curl will be
+# shown. Now, from the external/curl/ directory, run curl's normal configure
+# command with flags that match what Android itself uses. This will mean
+# putting the compiler directory into the PATH, putting the -I, -isystem and
+# -D options into CPPFLAGS, putting the -W, -m, -f, -O and -nostdlib options
+# into CFLAGS, and putting the -Wl, -L and -l options into LIBS, along with the
+# path to the files libgcc.a, crtbegin_dynamic.o, and ccrtend_android.o.
+# Remember that the paths must be absolute since you will not be running
+# configure from the same directory as the Android make. The normal
+# cross-compiler options must also be set. Note that the -c, -o, -MD and
+# similar flags must not be set.
+#
+# To see all the LIBS options, you'll need to do the "showcommands" trick on an
+# executable that's already buildable and watch what flags Android uses to link
+# it (dhcpcd is a good choice to watch). You'll also want to add -L options to
+# LIBS that point to the out/.../obj/lib/ and out/.../obj/system/lib/
+# directories so that additional libraries can be found and used by curl.
+#
+# The end result will be a configure command that looks something like this
+# (the environment variable A is set to the Android root path which makes the
+# command shorter):
+#
+# A=`realpath ../..` && \
+# PATH="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/bin:$PATH" \
+# ./configure --host=arm-linux CC=arm-eabi-gcc \
+# CPPFLAGS="-I $A/system/core/include ..." \
+# CFLAGS="-nostdlib -fno-exceptions -Wno-multichar ..." \
+# LIBS="$A/prebuilt/linux-x86/toolchain/arm-eabi-X/lib/gcc/arm-eabi/X\
+# /interwork/libgcc.a ..."
+#
+# Finally, copy the file COPYING to NOTICE so that the curl license gets put
+# into the right place (but see the note about this below).
+#
+# Dan Fandrich
+# November 2011
+
+LOCAL_PATH:= $(call my-dir)/../..
+
+common_CFLAGS := -Wpointer-arith -Wwrite-strings -Wunused -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wno-long-long -Wfloat-equal -Wno-multichar -Wsign-compare -Wno-format-nonliteral -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wno-system-headers -DHAVE_CONFIG_H
+
+#########################
+# Build the libcurl library
+
+include $(CLEAR_VARS)
+include $(LOCAL_PATH)/lib/Makefile.inc
+CURL_HEADERS := \
+ curl.h \
+ system.h \
+ curlver.h \
+ easy.h \
+ mprintf.h \
+ multi.h \
+ stdcheaders.h \
+ typecheck-gcc.h
+
+LOCAL_SRC_FILES := $(addprefix lib/,$(CSOURCES))
+LOCAL_C_INCLUDES += $(LOCAL_PATH)/include/
+LOCAL_CFLAGS += $(common_CFLAGS)
+
+LOCAL_COPY_HEADERS_TO := libcurl/curl
+LOCAL_COPY_HEADERS := $(addprefix include/curl/,$(CURL_HEADERS))
+
+LOCAL_MODULE:= libcurl
+LOCAL_MODULE_TAGS := optional
+
+# Copy the licence to a place where Android will find it.
+# Actually, this doesn't quite work because the build system searches
+# for NOTICE files before it gets to this point, so it will only be seen
+# on subsequent builds.
+ALL_PREBUILT += $(LOCAL_PATH)/NOTICE
+$(LOCAL_PATH)/NOTICE: $(LOCAL_PATH)/COPYING | $(ACP)
+ $(copy-file-to-target)
+
+include $(BUILD_STATIC_LIBRARY)
+
+
+#########################
+# Build the curl binary
+
+include $(CLEAR_VARS)
+include $(LOCAL_PATH)/src/Makefile.inc
+LOCAL_SRC_FILES := $(addprefix src/,$(CURL_CFILES))
+
+LOCAL_MODULE := curl
+LOCAL_MODULE_TAGS := optional
+LOCAL_STATIC_LIBRARIES := libcurl
+LOCAL_SYSTEM_SHARED_LIBRARIES := libc
+
+LOCAL_C_INCLUDES += $(LOCAL_PATH)/include $(LOCAL_PATH)/lib
+
+# This may also need to include $(CURLX_CFILES) in order to correctly link
+# if libcurl is changed to be built as a dynamic library
+LOCAL_CFLAGS += $(common_CFLAGS)
+
+include $(BUILD_EXECUTABLE)