diff --git a/ap/os/linux/linux-3.4.x/kernel/mutex.c b/ap/os/linux/linux-3.4.x/kernel/mutex.c
new file mode 100644
index 0000000..a307cc9
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/kernel/mutex.c
@@ -0,0 +1,498 @@
+/*
+ * kernel/mutex.c
+ *
+ * Mutexes: blocking mutual exclusion locks
+ *
+ * Started by Ingo Molnar:
+ *
+ *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *
+ * Many thanks to Arjan van de Ven, Thomas Gleixner, Steven Rostedt and
+ * David Howells for suggestions and improvements.
+ *
+ *  - Adaptive spinning for mutexes by Peter Zijlstra. (Ported to mainline
+ *    from the -rt tree, where it was originally implemented for rtmutexes
+ *    by Steven Rostedt, based on work by Gregory Haskins, Peter Morreale
+ *    and Sven Dietrich.
+ *
+ * Also see Documentation/mutex-design.txt.
+ */
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/export.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/debug_locks.h>
+
+/*
+ * In the DEBUG case we are using the "NULL fastpath" for mutexes,
+ * which forces all calls into the slowpath:
+ */
+#ifdef CONFIG_DEBUG_MUTEXES
+# include "mutex-debug.h"
+# include <asm-generic/mutex-null.h>
+#else
+# include "mutex.h"
+# include <asm/mutex.h>
+#endif
+
+void
+__mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key)
+{
+	atomic_set(&lock->count, 1);
+	spin_lock_init(&lock->wait_lock);
+	INIT_LIST_HEAD(&lock->wait_list);
+	mutex_clear_owner(lock);
+
+	debug_mutex_init(lock, name, key);
+}
+
+EXPORT_SYMBOL(__mutex_init);
+
+#ifndef CONFIG_DEBUG_LOCK_ALLOC
+/*
+ * We split the mutex lock/unlock logic into separate fastpath and
+ * slowpath functions, to reduce the register pressure on the fastpath.
+ * We also put the fastpath first in the kernel image, to make sure the
+ * branch is predicted by the CPU as default-untaken.
+ */
+static __used noinline void __sched
+__mutex_lock_slowpath(atomic_t *lock_count);
+
+/**
+ * mutex_lock - acquire the mutex
+ * @lock: the mutex to be acquired
+ *
+ * Lock the mutex exclusively for this task. If the mutex is not
+ * available right now, it will sleep until it can get it.
+ *
+ * The mutex must later on be released by the same task that
+ * acquired it. Recursive locking is not allowed. The task
+ * may not exit without first unlocking the mutex. Also, kernel
+ * memory where the mutex resides mutex must not be freed with
+ * the mutex still locked. The mutex must first be initialized
+ * (or statically defined) before it can be locked. memset()-ing
+ * the mutex to 0 is not allowed.
+ *
+ * ( The CONFIG_DEBUG_MUTEXES .config option turns on debugging
+ *   checks that will enforce the restrictions and will also do
+ *   deadlock debugging. )
+ *
+ * This function is similar to (but not equivalent to) down().
+ */
+void __sched mutex_lock(struct mutex *lock)
+{
+	might_sleep();
+	/*
+	 * The locking fastpath is the 1->0 transition from
+	 * 'unlocked' into 'locked' state.
+	 */
+	__mutex_fastpath_lock(&lock->count, __mutex_lock_slowpath);
+	mutex_set_owner(lock);
+}
+
+EXPORT_SYMBOL(mutex_lock);
+#endif
+
+static __used noinline void __sched __mutex_unlock_slowpath(atomic_t *lock_count);
+
+/**
+ * mutex_unlock - release the mutex
+ * @lock: the mutex to be released
+ *
+ * Unlock a mutex that has been locked by this task previously.
+ *
+ * This function must not be used in interrupt context. Unlocking
+ * of a not locked mutex is not allowed.
+ *
+ * This function is similar to (but not equivalent to) up().
+ */
+void __sched mutex_unlock(struct mutex *lock)
+{
+	/*
+	 * The unlocking fastpath is the 0->1 transition from 'locked'
+	 * into 'unlocked' state:
+	 */
+#ifndef CONFIG_DEBUG_MUTEXES
+	/*
+	 * When debugging is enabled we must not clear the owner before time,
+	 * the slow path will always be taken, and that clears the owner field
+	 * after verifying that it was indeed current.
+	 */
+	mutex_clear_owner(lock);
+#endif
+	__mutex_fastpath_unlock(&lock->count, __mutex_unlock_slowpath);
+}
+
+EXPORT_SYMBOL(mutex_unlock);
+
+/*
+ * Lock a mutex (possibly interruptible), slowpath:
+ */
+static inline int __sched
+__mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
+		    struct lockdep_map *nest_lock, unsigned long ip)
+{
+	struct task_struct *task = current;
+	struct mutex_waiter waiter;
+	unsigned long flags;
+
+	preempt_disable();
+	mutex_acquire_nest(&lock->dep_map, subclass, 0, nest_lock, ip);
+
+#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
+	/*
+	 * Optimistic spinning.
+	 *
+	 * We try to spin for acquisition when we find that there are no
+	 * pending waiters and the lock owner is currently running on a
+	 * (different) CPU.
+	 *
+	 * The rationale is that if the lock owner is running, it is likely to
+	 * release the lock soon.
+	 *
+	 * Since this needs the lock owner, and this mutex implementation
+	 * doesn't track the owner atomically in the lock field, we need to
+	 * track it non-atomically.
+	 *
+	 * We can't do this for DEBUG_MUTEXES because that relies on wait_lock
+	 * to serialize everything.
+	 */
+
+	for (;;) {
+		struct task_struct *owner;
+
+		/*
+		 * If there's an owner, wait for it to either
+		 * release the lock or go to sleep.
+		 */
+		owner = ACCESS_ONCE(lock->owner);
+		if (owner && !mutex_spin_on_owner(lock, owner))
+			break;
+
+		if (atomic_cmpxchg(&lock->count, 1, 0) == 1) {
+			lock_acquired(&lock->dep_map, ip);
+			mutex_set_owner(lock);
+			preempt_enable();
+			return 0;
+		}
+
+		/*
+		 * When there's no owner, we might have preempted between the
+		 * owner acquiring the lock and setting the owner field. If
+		 * we're an RT task that will live-lock because we won't let
+		 * the owner complete.
+		 */
+		if (!owner && (need_resched() || rt_task(task)))
+			break;
+
+		/*
+		 * The cpu_relax() call is a compiler barrier which forces
+		 * everything in this loop to be re-loaded. We don't need
+		 * memory barriers as we'll eventually observe the right
+		 * values at the cost of a few extra spins.
+		 */
+		arch_mutex_cpu_relax();
+	}
+#endif
+	spin_lock_mutex(&lock->wait_lock, flags);
+
+	debug_mutex_lock_common(lock, &waiter);
+	debug_mutex_add_waiter(lock, &waiter, task_thread_info(task));
+
+	/* add waiting tasks to the end of the waitqueue (FIFO): */
+	list_add_tail(&waiter.list, &lock->wait_list);
+	waiter.task = task;
+
+	if (atomic_xchg(&lock->count, -1) == 1)
+		goto done;
+
+	lock_contended(&lock->dep_map, ip);
+
+	for (;;) {
+		/*
+		 * Lets try to take the lock again - this is needed even if
+		 * we get here for the first time (shortly after failing to
+		 * acquire the lock), to make sure that we get a wakeup once
+		 * it's unlocked. Later on, if we sleep, this is the
+		 * operation that gives us the lock. We xchg it to -1, so
+		 * that when we release the lock, we properly wake up the
+		 * other waiters:
+		 */
+		if (atomic_xchg(&lock->count, -1) == 1)
+			break;
+
+		/*
+		 * got a signal? (This code gets eliminated in the
+		 * TASK_UNINTERRUPTIBLE case.)
+		 */
+		if (unlikely(signal_pending_state(state, task))) {
+			mutex_remove_waiter(lock, &waiter,
+					    task_thread_info(task));
+			mutex_release(&lock->dep_map, 1, ip);
+			spin_unlock_mutex(&lock->wait_lock, flags);
+
+			debug_mutex_free_waiter(&waiter);
+			preempt_enable();
+			return -EINTR;
+		}
+		__set_task_state(task, state);
+
+		/* didn't get the lock, go to sleep: */
+		spin_unlock_mutex(&lock->wait_lock, flags);
+		schedule_preempt_disabled();
+		spin_lock_mutex(&lock->wait_lock, flags);
+	}
+
+done:
+	lock_acquired(&lock->dep_map, ip);
+	/* got the lock - rejoice! */
+	mutex_remove_waiter(lock, &waiter, current_thread_info());
+	mutex_set_owner(lock);
+
+	/* set it to 0 if there are no waiters left: */
+	if (likely(list_empty(&lock->wait_list)))
+		atomic_set(&lock->count, 0);
+
+	spin_unlock_mutex(&lock->wait_lock, flags);
+
+	debug_mutex_free_waiter(&waiter);
+	preempt_enable();
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+void __sched
+mutex_lock_nested(struct mutex *lock, unsigned int subclass)
+{
+	might_sleep();
+	__mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, subclass, NULL, _RET_IP_);
+}
+
+EXPORT_SYMBOL_GPL(mutex_lock_nested);
+
+void __sched
+_mutex_lock_nest_lock(struct mutex *lock, struct lockdep_map *nest)
+{
+	might_sleep();
+	__mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, 0, nest, _RET_IP_);
+}
+
+EXPORT_SYMBOL_GPL(_mutex_lock_nest_lock);
+
+int __sched
+mutex_lock_killable_nested(struct mutex *lock, unsigned int subclass)
+{
+	might_sleep();
+	return __mutex_lock_common(lock, TASK_KILLABLE, subclass, NULL, _RET_IP_);
+}
+EXPORT_SYMBOL_GPL(mutex_lock_killable_nested);
+
+int __sched
+mutex_lock_interruptible_nested(struct mutex *lock, unsigned int subclass)
+{
+	might_sleep();
+	return __mutex_lock_common(lock, TASK_INTERRUPTIBLE,
+				   subclass, NULL, _RET_IP_);
+}
+
+EXPORT_SYMBOL_GPL(mutex_lock_interruptible_nested);
+#endif
+
+/*
+ * Release the lock, slowpath:
+ */
+static inline void
+__mutex_unlock_common_slowpath(atomic_t *lock_count, int nested)
+{
+	struct mutex *lock = container_of(lock_count, struct mutex, count);
+	unsigned long flags;
+
+	spin_lock_mutex(&lock->wait_lock, flags);
+	mutex_release(&lock->dep_map, nested, _RET_IP_);
+	debug_mutex_unlock(lock);
+
+	/*
+	 * some architectures leave the lock unlocked in the fastpath failure
+	 * case, others need to leave it locked. In the later case we have to
+	 * unlock it here
+	 */
+	if (__mutex_slowpath_needs_to_unlock())
+		atomic_set(&lock->count, 1);
+
+	if (!list_empty(&lock->wait_list)) {
+		/* get the first entry from the wait-list: */
+		struct mutex_waiter *waiter =
+				list_entry(lock->wait_list.next,
+					   struct mutex_waiter, list);
+
+		debug_mutex_wake_waiter(lock, waiter);
+
+		wake_up_process(waiter->task);
+	}
+
+	spin_unlock_mutex(&lock->wait_lock, flags);
+}
+
+/*
+ * Release the lock, slowpath:
+ */
+static __used noinline void
+__mutex_unlock_slowpath(atomic_t *lock_count)
+{
+	__mutex_unlock_common_slowpath(lock_count, 1);
+}
+
+#ifndef CONFIG_DEBUG_LOCK_ALLOC
+/*
+ * Here come the less common (and hence less performance-critical) APIs:
+ * mutex_lock_interruptible() and mutex_trylock().
+ */
+static noinline int __sched
+__mutex_lock_killable_slowpath(atomic_t *lock_count);
+
+static noinline int __sched
+__mutex_lock_interruptible_slowpath(atomic_t *lock_count);
+
+/**
+ * mutex_lock_interruptible - acquire the mutex, interruptible
+ * @lock: the mutex to be acquired
+ *
+ * Lock the mutex like mutex_lock(), and return 0 if the mutex has
+ * been acquired or sleep until the mutex becomes available. If a
+ * signal arrives while waiting for the lock then this function
+ * returns -EINTR.
+ *
+ * This function is similar to (but not equivalent to) down_interruptible().
+ */
+int __sched mutex_lock_interruptible(struct mutex *lock)
+{
+	int ret;
+
+	might_sleep();
+	ret =  __mutex_fastpath_lock_retval
+			(&lock->count, __mutex_lock_interruptible_slowpath);
+	if (!ret)
+		mutex_set_owner(lock);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(mutex_lock_interruptible);
+
+int __sched mutex_lock_killable(struct mutex *lock)
+{
+	int ret;
+
+	might_sleep();
+	ret = __mutex_fastpath_lock_retval
+			(&lock->count, __mutex_lock_killable_slowpath);
+	if (!ret)
+		mutex_set_owner(lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mutex_lock_killable);
+
+static __used noinline void __sched
+__mutex_lock_slowpath(atomic_t *lock_count)
+{
+	struct mutex *lock = container_of(lock_count, struct mutex, count);
+
+	__mutex_lock_common(lock, TASK_UNINTERRUPTIBLE, 0, NULL, _RET_IP_);
+}
+
+static noinline int __sched
+__mutex_lock_killable_slowpath(atomic_t *lock_count)
+{
+	struct mutex *lock = container_of(lock_count, struct mutex, count);
+
+	return __mutex_lock_common(lock, TASK_KILLABLE, 0, NULL, _RET_IP_);
+}
+
+static noinline int __sched
+__mutex_lock_interruptible_slowpath(atomic_t *lock_count)
+{
+	struct mutex *lock = container_of(lock_count, struct mutex, count);
+
+	return __mutex_lock_common(lock, TASK_INTERRUPTIBLE, 0, NULL, _RET_IP_);
+}
+#endif
+
+/*
+ * Spinlock based trylock, we take the spinlock and check whether we
+ * can get the lock:
+ */
+static inline int __mutex_trylock_slowpath(atomic_t *lock_count)
+{
+	struct mutex *lock = container_of(lock_count, struct mutex, count);
+	unsigned long flags;
+	int prev;
+
+	spin_lock_mutex(&lock->wait_lock, flags);
+
+	prev = atomic_xchg(&lock->count, -1);
+	if (likely(prev == 1)) {
+		mutex_set_owner(lock);
+		mutex_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+	}
+
+	/* Set it back to 0 if there are no waiters: */
+	if (likely(list_empty(&lock->wait_list)))
+		atomic_set(&lock->count, 0);
+
+	spin_unlock_mutex(&lock->wait_lock, flags);
+
+	return prev == 1;
+}
+
+/**
+ * mutex_trylock - try to acquire the mutex, without waiting
+ * @lock: the mutex to be acquired
+ *
+ * Try to acquire the mutex atomically. Returns 1 if the mutex
+ * has been acquired successfully, and 0 on contention.
+ *
+ * NOTE: this function follows the spin_trylock() convention, so
+ * it is negated from the down_trylock() return values! Be careful
+ * about this when converting semaphore users to mutexes.
+ *
+ * This function must not be used in interrupt context. The
+ * mutex must be released by the same task that acquired it.
+ */
+int __sched mutex_trylock(struct mutex *lock)
+{
+	int ret;
+
+	ret = __mutex_fastpath_trylock(&lock->count, __mutex_trylock_slowpath);
+	if (ret)
+		mutex_set_owner(lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mutex_trylock);
+
+/**
+ * atomic_dec_and_mutex_lock - return holding mutex if we dec to 0
+ * @cnt: the atomic which we are to dec
+ * @lock: the mutex to return holding if we dec to 0
+ *
+ * return true and hold lock if we dec to 0, return false otherwise
+ */
+int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock)
+{
+	/* dec if we can't possibly hit 0 */
+	if (atomic_add_unless(cnt, -1, 1))
+		return 0;
+	/* we might hit 0, so take the lock */
+	mutex_lock(lock);
+	if (!atomic_dec_and_test(cnt)) {
+		/* when we actually did the dec, we didn't hit 0 */
+		mutex_unlock(lock);
+		return 0;
+	}
+	/* we hit 0, and we hold the lock */
+	return 1;
+}
+EXPORT_SYMBOL(atomic_dec_and_mutex_lock);