[Bugfix][API-1547] Change RIL FWK broadcast addr to 127.255.255.255
Only Configure: No
Affected branch: LYNQ_PUBLIC master
Affected module: RIL
Is it affected on both ZXIC and MTK: only MTK
Self-test: Yes
Doc Update: No
Change-Id: I1538fed1ad6fccdee69b607423b97bb6598dfc5a
diff --git a/common_src/framework/lynq-ril-service/src/ril.cpp b/common_src/framework/lynq-ril-service/src/ril.cpp
index ef41d33..bf24c67 100755
--- a/common_src/framework/lynq-ril-service/src/ril.cpp
+++ b/common_src/framework/lynq-ril-service/src/ril.cpp
@@ -170,6 +170,12 @@
#define LYNQ_SERVICE_PORT 8088
#define LYNQ_AT_SERVICE_PORT 8087
#define LYNQ_BRODCAST_PORT 8086
+#ifdef GSW_RIL_CFG
+/*Interfaces lo net addr 127.0.0.1,mask 255.0.0.0,so lo broadcast addr is 127.255.255.255*/
+#define LYNQ_RIL_FWK_BROADCAST_IP "127.255.255.255" /*hong.liu change broadcast addr on 2024.2.18*/
+#else
+#define LYNQ_RIL_FWK_BROADCAST_IP "255.255.255.255"
+#endif
#define LYNQ_SOCKET_BUFFER (1024*8+sizeof(int)*3+10)
/*lei add*/
#define LYNQ_AT_SOCKET_BUFFER 1024
@@ -6052,8 +6058,6 @@
perror("creaet socket for udp fail");
return;
}
- /* 设置socket允许重复使用地址与端口，SO_REUSEADDR值为2 */
- //setsockopt(socket_fd,SOL_SOCKET,SO_REUSEADDR,&on,sizeof on);
/* 使能广播功能，SO_BROADCAST值为6 */
ret= setsockopt(lynq_urc_socket_fd,SOL_SOCKET,SO_BROADCAST,&on,sizeof(on));
if(ret<0)
@@ -6076,8 +6080,8 @@
urc_broadcast_addr.sin_family = AF_INET; //IPv4
urc_broadcast_addr.sin_port = htons(LYNQ_BRODCAST_PORT);
- urc_broadcast_addr.sin_addr.s_addr = inet_addr("255.255.255.255" );//255.255.255.255 broadcast addrress.
- printf("LYNQ_RIL_urcClientInit success!!!\n");
+ urc_broadcast_addr.sin_addr.s_addr = inet_addr(LYNQ_RIL_FWK_BROADCAST_IP);/*hong.liu change broadcast addr on 2024.2.18*/
+ RLOGE("LYNQ_RIL_urcClientInit success!!!");
return;
}
diff --git a/common_src/lib/liblynq-call/lynq_module_socket.cpp b/common_src/lib/liblynq-call/lynq_module_socket.cpp
index 1539a91..b33dd68 100755
--- a/common_src/lib/liblynq-call/lynq_module_socket.cpp
+++ b/common_src/lib/liblynq-call/lynq_module_socket.cpp
@@ -20,7 +20,11 @@
#define LYNQ_SERVICE_PORT 8088
#define LYNQ_ADDRESS "127.0.0.1"
#define LYNQ_URC_SERVICE_PORT 8086
+#ifdef GSW_RIL_CFG
+#define LYNQ_URC_ADDRESS "127.255.255.255" /*hong.liu change broadcast addr on 2024.2.18*/
+#else
#define LYNQ_URC_ADDRESS "0.0.0.0"
+#endif
#define LYNQ_REQUEST_PARAM_BUF 8192
#define LYNQ_REC_BUF 8192
diff --git a/common_src/lib/liblynq-call/makefile b/common_src/lib/liblynq-call/makefile
index 40415dc..6073694 100755
--- a/common_src/lib/liblynq-call/makefile
+++ b/common_src/lib/liblynq-call/makefile
@@ -13,6 +13,9 @@
-fpermissive \
+ifeq ($(strip $(MOBILETEK_RIL_CFG)), GSW)
+ LOCAL_CFLAGS += -DGSW_RIL_CFG
+endif
$(warning ################# lynq data demo ROOT: $(ROOT),includedir:$(includedir))
LOCAL_PATH = .
diff --git a/common_src/lib/liblynq-data/lynq_data_urc.cpp b/common_src/lib/liblynq-data/lynq_data_urc.cpp
index c3d95c6..45996e0 100755
--- a/common_src/lib/liblynq-data/lynq_data_urc.cpp
+++ b/common_src/lib/liblynq-data/lynq_data_urc.cpp
@@ -177,7 +177,7 @@
}
urc_local_addr.sin_family = AF_INET;
urc_local_addr.sin_port = htons(LYNQ_URC_SERVICE_PORT);
- urc_local_addr.sin_addr.s_addr = htons(INADDR_ANY);
+ urc_local_addr.sin_addr.s_addr = inet_addr(LYNQ_RIL_FWK_BROADCAST_IP);/*hong.liu change broadcast addr on 2024.2.18*/
/* Set socket to allow reuse of address and port, SO_REUSEADDR value is 2*/
rt = setsockopt(lynq_urc_sockfd,SOL_SOCKET,SO_REUSEADDR,&on,sizeof on);
if(rt<0)
diff --git a/common_src/lib/liblynq-data/lynq_data_urc.h b/common_src/lib/liblynq-data/lynq_data_urc.h
index 59f9f9d..11aeb08 100755
--- a/common_src/lib/liblynq-data/lynq_data_urc.h
+++ b/common_src/lib/liblynq-data/lynq_data_urc.h
@@ -4,6 +4,11 @@
using ::android::Parcel;
#define LYNQ_URC_SERVICE_PORT 8086
+#ifdef GSW_RIL_CFG
+#define LYNQ_RIL_FWK_BROADCAST_IP "127.255.255.255" /*hong.liu change broadcast addr on 2024.2.18*/
+#else
+#define LYNQ_RIL_FWK_BROADCAST_IP "0.0.0.0"
+#endif
/*the same with lynq_interface.h begin*/
#define LYNQ_REQUEST_VENDOR_BASE 8000
diff --git a/common_src/lib/liblynq-network/lynq_module_socket.cpp b/common_src/lib/liblynq-network/lynq_module_socket.cpp
index 8ab8f34..35dd9d6 100755
--- a/common_src/lib/liblynq-network/lynq_module_socket.cpp
+++ b/common_src/lib/liblynq-network/lynq_module_socket.cpp
@@ -20,7 +20,11 @@
#define LYNQ_SERVICE_PORT 8088
#define LYNQ_ADDRESS "127.0.0.1"
#define LYNQ_URC_SERVICE_PORT 8086
+#ifdef GSW_RIL_CFG
+#define LYNQ_URC_ADDRESS "127.255.255.255" /*hong.liu change broadcast addr on 2024.2.18*/
+#else
#define LYNQ_URC_ADDRESS "0.0.0.0"
+#endif
#define LYNQ_REQUEST_PARAM_BUF 8192
#define LYNQ_REC_BUF 8192
diff --git a/common_src/lib/liblynq-network/makefile b/common_src/lib/liblynq-network/makefile
index 0ae6805..044d7f5 100755
--- a/common_src/lib/liblynq-network/makefile
+++ b/common_src/lib/liblynq-network/makefile
@@ -10,7 +10,9 @@
-DKEEP_ALIVE \
-DECALL_SUPPORT
-
+ifeq ($(strip $(MOBILETEK_RIL_CFG)), GSW)
+ LOCAL_CFLAGS += -DGSW_RIL_CFG
+endif
$(warning ################# lynq network demo ROOT: $(ROOT),includedir:$(includedir))
LOCAL_PATH = .
diff --git a/common_src/lib/liblynq-sms/lynq_module_socket.cpp b/common_src/lib/liblynq-sms/lynq_module_socket.cpp
index d7c654e..dae9b5c 100755
--- a/common_src/lib/liblynq-sms/lynq_module_socket.cpp
+++ b/common_src/lib/liblynq-sms/lynq_module_socket.cpp
@@ -20,7 +20,11 @@
#define LYNQ_SERVICE_PORT 8088
#define LYNQ_ADDRESS "127.0.0.1"
#define LYNQ_URC_SERVICE_PORT 8086
+#ifdef GSW_RIL_CFG
+#define LYNQ_URC_ADDRESS "127.255.255.255" /*hong.liu change broadcast addr on 2024.2.18*/
+#else
#define LYNQ_URC_ADDRESS "0.0.0.0"
+#endif
#define LYNQ_REQUEST_PARAM_BUF 8192
#define LYNQ_REC_BUF 8192
diff --git a/common_src/lib/liblynq-sms/makefile b/common_src/lib/liblynq-sms/makefile
index e5dedab..e7abb27 100755
--- a/common_src/lib/liblynq-sms/makefile
+++ b/common_src/lib/liblynq-sms/makefile
@@ -12,7 +12,9 @@
-DECALL_SUPPORT \
-fpermissive \
-
+ifeq ($(strip $(MOBILETEK_RIL_CFG)), GSW)
+ LOCAL_CFLAGS += -DGSW_RIL_CFG
+endif
$(warning ################# lynq data demo ROOT: $(ROOT),includedir:$(includedir))
LOCAL_PATH = .