zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/app/Script/scripts/auto_dial.sh b/ap/app/Script/scripts/auto_dial.sh
new file mode 100644
index 0000000..f6508cc
--- /dev/null
+++ b/ap/app/Script/scripts/auto_dial.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: auto_dial.sh $1 start" >> $test_log
+
+wanlan_select()
+{
+ auto_wan_if=`nv get $1`
+ ifconfig $auto_wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $auto_wan_if down" >> $test_log
+ fi
+ ifconfig $auto_wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $auto_wan_if up" >> $test_log
+ fi
+ (eth_auto_connect || echo "Error: eth_auto_connect failed." >> $test_log) &
+}
+
+
+wanlan_select $1
diff --git a/ap/app/Script/scripts/clat_config.sh b/ap/app/Script/scripts/clat_config.sh
new file mode 100644
index 0000000..c1a9b2b
--- /dev/null
+++ b/ap/app/Script/scripts/clat_config.sh
@@ -0,0 +1,63 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: clat_config.sh $1 $2 start" >> $test_log
+
+if [ "x$2" != "x" ]; then
+ wan1_ipv6_prefix_info=`nv get $2"_ipv6_prefix_info"`
+fi
+
+if [ "x$wan1_ipv6_prefix_info" != "x" ]; then
+ clat6_ipv6="$wan1_ipv6_prefix_info"":464"
+fi
+
+ipv4_fake_subnet=`nv get ipv4_fake_subnet`
+clat_fake_subnet=`nv get clat_fake_subnet`
+ipv6_fake_addr=`nv get ipv6_fake_subnet`
+if [ "x$ipv6_fake_addr" != "x" ];then
+ ipv6_fake_subnet=$ipv6_fake_addr"/64"
+fi
+
+case $1 in
+ "up")
+ if [ "x$ipv4_fake_subnet" == "x" -a "x$clat_fake_subnet" == "x" -a "x$ipv6_fake_addr" == "x" ];then
+ echo "Info: ipv4_fake_subnet and clat_fake_subnet not exist, please check!!!" >> $test_log
+ fi
+
+ # for 46
+ route add default dev clat4 metric 40
+ route add -net $ipv4_fake_subnet netmask 255.255.0.0 dev clat4
+ iptables -t nat -A POSTROUTING -o clat4 -j MASQUERADE
+
+ if [ "x$clat6_ipv6" != "x" -a "x$2" != "x" ]; then
+ ip -6 neigh add proxy $clat6_ipv6 dev $2
+ fi
+
+ echo 1 > /proc/sys/net/ipv4/ip_forward
+
+ #for 64
+ #ip -6 route add $ipv6_fake_subnet dev clat
+ #route add -net $clat_fake_subnet netmask 255.255.255.0 dev clat4
+ ;;
+
+ "down")
+
+ # for 46
+ route del default dev clat4 metric 40
+ route del -net $ipv4_fake_subnet netmask 255.255.0.0 dev clat4
+ iptables -t nat -D POSTROUTING -o clat4 -j MASQUERADE
+
+ if [ "x$clat6_ipv6" != "x" -a "x$2" != "x" ]; then
+ ip -6 neigh del proxy $clat6_ipv6 dev $2
+ fi
+
+ #for 64
+ #ip -6 route del $ipv6_fake_subnet dev clat
+ #route del -net $clat_fake_subnet netmask 255.255.255.0 dev clat4
+ ;;
+
+esac
+
+
diff --git a/ap/app/Script/scripts/config-dns.sh b/ap/app/Script/scripts/config-dns.sh
new file mode 100644
index 0000000..5237ca3
--- /dev/null
+++ b/ap/app/Script/scripts/config-dns.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+#
+# $Id: config-dns.sh, v10.08.05, 2010-08-05 15:00:00
+#
+# usage: config-dns.sh [<dns1>] [<dns2>]
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: config-dns.sh $1 $2 start" >> $test_log
+fname=$path_conf"/etc/resolv.conf"
+fbak=$path_conf"/etc/resolv_conf.bak"
+
+# in case no previous file
+touch $fname
+
+# backup file without nameserver part
+sed -e '/nameserver/d' $fname > $fbak
+
+# set primary and seconday DNS
+if [ "x$1" != "x" ]; then
+ echo "nameserver $1" > $fname
+else # empty dns
+ rm -f $fname
+fi
+if [ "x$2" != "x" ]; then
+ echo "nameserver $2" >> $fname
+fi
+
+cat $fbak >> $fname
+rm -f $fbak
+
diff --git a/ap/app/Script/scripts/config-hostname.sh b/ap/app/Script/scripts/config-hostname.sh
new file mode 100644
index 0000000..bf4c5cc
--- /dev/null
+++ b/ap/app/Script/scripts/config-hostname.sh
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: config-hostname.sh $1 $2 start" >> $test_log
+fname=$path_conf"/hostname_mac_file"
+fbak=$path_conf"/hostname_mac_file_bak"
+
+if [ "x$1" = "x" ]; then
+ echo "insufficient arguments.."
+elif [ "x$2" = "x" ]; then
+ sed -e "/$1/d" $fname > $fbak
+ cat $fbak > $fname
+ rm -f $fbak
+else # $1 mac, $2 hostname
+ sed -e "/$1/d" $fname > $fbak
+ echo "$1 $2" >> $fbak
+ cat $fbak > $fname
+ rm -f $fbak
+fi
+
+
diff --git a/ap/app/Script/scripts/config-igmpproxy.sh b/ap/app/Script/scripts/config-igmpproxy.sh
new file mode 100644
index 0000000..353970e
--- /dev/null
+++ b/ap/app/Script/scripts/config-igmpproxy.sh
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# usage: see function usage()
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+
+usage () {
+ echo "usage: config-udhcpd.sh [option]..."
+ echo "options:"
+ echo " -h : print this help"
+ echo " -c : clean the conf file"
+ echo " -u interface : set upstream interface for server"
+ echo " -d interface1 [interface2].. : set downstream interface for client"
+ echo " -s addr : set gateway of upstream interface"
+ echo " -r : run igmpproxy"
+ exit
+}
+
+config () {
+ case "$1" in
+ "-c")
+ sed -i '36,$d' $fname;;
+ "-u")
+ sed -i "30c phyint $2 upstream ratelimit 0 threshold 1" $fname;;
+ "-d")
+ sed -i '$a phyint '"$2"' downstream ratelimit 0 threshold 1' $fname
+ sed -i '$a' $fname;;
+ "-s")
+ sed -i "31c altnet $2/24" $fname;;
+
+ esac
+
+}
+
+
+fname=$path_conf"/igmpproxy.conf"
+
+case "$1" in
+
+
+ "-h") usage;;
+ "-c") config "$1";;
+ "-u") config "$1" "$2";;
+ "-s") config "$1" "$2";;
+ "-d") config "$1" "$2" "$3" "$4";;
+ "-r") igmpproxy& ;;
+ *) usage;;
+esac
+
+
diff --git a/ap/app/Script/scripts/config-parents.sh b/ap/app/Script/scripts/config-parents.sh
new file mode 100644
index 0000000..b38ff67
--- /dev/null
+++ b/ap/app/Script/scripts/config-parents.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: config-parents $1 $2 $3 start" >> $test_log
+
+device()
+{
+ fname=$path_conf"/children_device_file"
+ fbak=$path_conf"/children_device_file_bak"
+
+ if [ "x$1" = "x" ]; then
+ echo "insufficient arguments.."
+ elif [ "x$2" = "x" ]; then
+ sed -e "/$1/d" $fname > $fbak
+ cat $fbak > $fname
+ rm -f $fbak
+ else # $1 mac, $2 hostname
+ sed -e "/$1/d" $fname > $fbak
+ echo "$1 $2" >> $fbak
+ cat $fbak > $fname
+ rm -f $fbak
+ fi
+}
+white_site()
+{
+ fname=${path_conf}/white_site_file
+ fbak=${path_conf}/white_site_file_bak
+ if [ "x$1" = "x" ]; then
+ echo "no action"
+ elif [ "x$1" = "x-A" ]; then
+ if [ "x$2" = "x" ]; then
+ echo "no site to add"
+ else #s2:site s3:name
+ #sed -i "s%$2.*%%" $fname
+ #sed -i "/^$/d" $fname
+ echo "$2,$3" >> $fname
+ #cat $fbak > $fname
+ #rm -f $fbak
+ fi
+ elif [ "x$1" = "x-D" ]; then
+ if [ "x$2" = "x" ]; then
+ echo "no site to delete"
+ else #s2:ids
+ ids=$2
+ if [ -n "$ids" ]; then
+ echo $ids|grep ",$"
+ if [ 0 -eq $? ]; then
+ echo "_____1"
+ echo $ids|sed 's/\(,\)/d;/g'|sed 's%^\(.*\)%sed -i "\1"%'|sed "s,$, $fname,"|sh
+ else
+ echo "______2"
+ echo $ids|sed 's/\(,\)/d;/g'|sed 's%^\(.*\)%sed -i "\1d"%'|sed "s,$, $fname," |sh
+ fi
+ fi
+ fi
+ else # $1 mac, $2 hostname
+ echo "error action"
+ fi
+}
+
+if [ "$1" = "white_site" ]; then
+ white_site $2 $3 $4
+elif [ "$1" = "device" ]; then
+ device $2 $3
+fi
\ No newline at end of file
diff --git a/ap/app/Script/scripts/config-udhcpd.sh b/ap/app/Script/scripts/config-udhcpd.sh
new file mode 100644
index 0000000..dfbd2c1
--- /dev/null
+++ b/ap/app/Script/scripts/config-udhcpd.sh
@@ -0,0 +1,271 @@
+#!/bin/sh
+#
+# $Id: config-udhcpd.sh,v 1.10 2010-06-18 06:33:21 steven Exp $
+#
+# usage: see function usage()
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+dhcp_type=$1
+
+usage () {
+ echo "usage: config-udhcpd.sh [option]..."
+ echo "options:"
+ echo " -h : print this help"
+ echo " -s ipaddr : set ipaddr as start of the IP lease block"
+ echo " -e ipaddr : set ipaddr as end of the IP lease block"
+ echo " -i ifc : set ifc as the interface that udhcpd will use"
+ echo " -d dns1 [dns2] : set dns1 and dns2 as DNS"
+ echo " -m mask : set mask as subnet netmask"
+ echo " -g gateway : set gateway as router's IP address"
+ echo " -t time : set time seconds as the IP life time"
+ echo " -r [sleep_time] : run dhcp server"
+ echo " -k : kill the running dhcp server"
+ echo " -S [mac ipaddr] : statically assign IP to given MAC address"
+
+ exit
+}
+
+config () {
+ case "$1" in
+ "-s")
+ sed -e '/start/d' $fname > $fbak
+ echo "start $2" >> $fbak ;;
+ "-e")
+ sed -e '/end/d' $fname > $fbak
+ echo "end $2" >> $fbak ;;
+ "-i")
+ sed -e '/interface/d' $fname > $fbak
+ echo "interface $2" >> $fbak ;;
+ "-p")
+ sed -e '/pidfile/d' $fname > $fbak
+ echo "pidfile $2" >> $fbak ;;
+ "-l")
+ sed -e '/lease_file/d' $fname > $fbak
+ echo "lease_file $2" >> $fbak ;;
+ "-d")
+ sed -e '/option *dns/d' $fname > $fbak
+ echo "option dns $2 $3" >> $fbak ;;
+ "-m")
+ sed -e '/option *subnet/d' $fname > $fbak
+ echo "option subnet $2" >> $fbak ;;
+ "-g")
+ sed -e '/option *router/d' $fname > $fbak
+ echo "option router $2" >> $fbak ;;
+ "-t")
+ sed -e '/option *lease/d' $fname > $fbak
+ echo "option lease $2" >> $fbak ;;
+ "-S")
+ if [ "$2" = "" ]; then
+ sed -e '/static_lease/d' $fname > $fbak
+ elif [ "$3" = "" ]; then
+ echo "insufficient arguments.."
+ usage
+ else
+ sed -e "/$2/d" $fname > $fbak
+ echo "static_lease $2 $3" >> $fbak
+ cat $fbak > $fname
+ rm -f $fbak
+ sed -e "/$2/d" $fname_static > $fbak_static
+ echo "$2 $3" >> $fbak_static
+ cat $fbak_static > $fname_static
+ rm -f $fbak_static
+ return
+ fi
+ ;;
+ "-x")
+ sed -e '/static_netmask/d' $fname > $fbak
+ echo "static_netmask $2" >> $fbak ;;
+ "-y")
+ sed -e '/static_router/d' $fname > $fbak
+ echo "static_router $2" >> $fbak ;;
+ "-D")
+ sed -e "/$2/d" $fname > $fbak
+ sed -e "/$2/d" $fname_static > $fbak_static
+ cat $fbak_static > $fname_static
+ rm -f $fbak_static;;
+ "-E")
+ while read LINE
+ do
+ echo "static_lease $LINE" >> $fbak
+ done < $fname_static ;;
+ *) return;;
+ esac
+ cat $fbak > $fname
+ rm -f $fbak
+ return
+}
+
+# arg1: phy address.
+link_down()
+{
+ # get original register value
+ get_mii=`mii_mgr -g -p $1 -r 0`
+ orig=`echo $get_mii | sed 's/^.....................//'`
+
+ # stupid hex value calculation.
+ pre=`echo $orig | sed 's/...$//'`
+ post=`echo $orig | sed 's/^..//'`
+ num_hex=`echo $orig | sed 's/^.//' | sed 's/..$//'`
+ case $num_hex in
+ "0") rep="8" ;;
+ "1") rep="9" ;;
+ "2") rep="a" ;;
+ "3") rep="b" ;;
+ "4") rep="c" ;;
+ "5") rep="d" ;;
+ "6") rep="e" ;;
+ "7") rep="f" ;;
+ # The power is already down
+ *) echo "Port$1 is down. Skip.";return;;
+ esac
+ new=$pre$rep$post
+ # power down
+ mii_mgr -s -p $1 -r 0 -v $new 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: mii_mgr -s -p $1 -r 0 -v $new" >> $test_log
+ fi
+}
+
+link_up()
+{
+ # get original register value
+ get_mii=`mii_mgr -g -p $1 -r 0`
+ orig=`echo $get_mii | sed 's/^.....................//'`
+
+ # stupid hex value calculation.
+ pre=`echo $orig | sed 's/...$//'`
+ post=`echo $orig | sed 's/^..//'`
+ num_hex=`echo $orig | sed 's/^.//' | sed 's/..$//'`
+ case $num_hex in
+ "8") rep="0" ;;
+ "9") rep="1" ;;
+ "a") rep="2" ;;
+ "b") rep="3" ;;
+ "c") rep="4" ;;
+ "d") rep="5" ;;
+ "e") rep="6" ;;
+ "f") rep="7" ;;
+ # The power is already up
+ *) echo "Port$1 is up. Skip.";return;;
+ esac
+ new=$pre$rep$post
+ # power up
+ mii_mgr -s -p $1 -r 0 -v $new 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: mii_mgr -s -p $1 -r 0 -v $new" >> $test_log
+ fi
+}
+
+reset_all_phys()
+{
+ sleep_time=$1
+
+ if [ "x$CONFIG_RAETH_ROUTER" != "xy" -a "x$CONFIG_RT_3052_ESW" != "xy" ]; then
+ return
+ fi
+
+ opmode=`nvram_get 2860 OperationMode`
+
+ #skip WAN port
+ if [ "x$opmode" != "x1" ]; then #no wan port
+ link_down 0
+ link_down 4
+ elif [ "x$CONFIG_WAN_AT_P4" = "xy" ]; then #wan port at port4
+ link_down 0
+ elif [ "x$CONFIG_WAN_AT_P0" = "xy" ]; then #wan port at port0
+ link_down 4
+ fi
+ link_down 1
+ link_down 2
+ link_down 3
+
+ #force Windows clients to renew IP and update DNS server
+ sleep $sleep_time
+
+ #skip WAN port
+ if [ "x$opmode" != "x1" ]; then #no wan port
+ link_up 0
+ link_up 4
+ elif [ "x$CONFIG_WAN_AT_P4" = "xy" ]; then #wan port at port4
+ link_up 0
+ elif [ "x$CONFIG_WAN_AT_P0" = "xy" ]; then #wan port at port0
+ link_up 4
+ fi
+ link_up 1
+ link_up 2
+ link_up 3
+}
+
+# argv 1 is empty
+if [ "$1" = "" ]; then
+ usage
+fi
+
+# argv 2 is empty
+if [ "$2" = "" ]; then
+ if [ "$1" != "-r" -a "$1" != "-k" -a "$1" != "-S" ]; then
+ usage
+ fi
+fi
+
+
+if [ "x$1" == "xlan" ]; then
+ fname=$path_conf"/udhcpd.conf"
+ fbak=$path_conf"/udhcpd.conf_bak"
+ pidfile=$path_conf"/udhcpd.pid"
+ leases=$path_conf"/udhcpd.leases"
+else
+ fname=$path_conf"/udhcpd"$1".conf"
+ fbak=$path_conf"/udhcpd"$1".conf_bak"
+ pidfile=$path_conf"/udhcpd"$1".pid"
+ leases=$path_conf"/udhcpd"$1".leases"
+fi
+fname_static=$path_conf"/static_macip_file"
+fbak_static=$path_conf"/static_macip_file_bak"
+touch $fname
+
+case "$2" in
+
+ "-r")
+
+ if [ -e ${pidfile} ]; then
+ kill `cat $pidfile`
+ fi
+ rm -f $pidfile
+ touch $leases
+ sed '/^lease_file /d' $fname > $fbak
+ cat $fbak > $fname
+ echo "lease_file $leases" >> $fname
+ linenum=`cat $fname|wc -l`
+ if [ $linenum -ne 9 -a "$dhcp_type" == "lan" ]; then
+ . $path_sh/user-config-udhcpd.sh
+ fi
+ udhcpd -f $fname &
+ reset_all_phys $3
+ ;;
+ "-h") usage;;
+ "-p") config "$2" "$3";;
+ "-l") config "$2" "$3";;
+ "-s") config "$2" "$3";;
+ "-e") config "$2" "$3";;
+ "-i") config "$2" "$3";;
+ "-d") config "$2" "$3" "$4";;
+ "-m") config "$2" "$3";;
+ "-g") config "$2" "$3";;
+ "-t") config "$2" "$3";;
+ "-S") config "$2" "$3" "$4";;
+ "-D") config "$2" "$3";;
+ "-E") config "$2";;
+ "-k")
+ if [ -e ${pidfile} ]; then
+ kill `cat $pidfile`
+ fi
+ rm -f $pidfile ;;
+ "-x") config "$2" "$3";;
+ "-y") config "$2" "$3";;
+ *) usage;;
+esac
+
+
diff --git a/ap/app/Script/scripts/customer_type.sh b/ap/app/Script/scripts/customer_type.sh
new file mode 100644
index 0000000..aa3a7d4
--- /dev/null
+++ b/ap/app/Script/scripts/customer_type.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+# ´Ë½Ç¶ÈÓÃÓÚ¿Í»§¶¨Öƹ¦ÄÜ
+
+# Ϊ¹úµç¶¨ÖÆ£¬Èç¹ûÊǹúµç£¬Ç¿Ðгõʼ»¯¹úµçÏà¹ØNV£¬ÐèÒªÔÚÏà¹ØÓ¦ÓÃÆô¶¯Ç°
+customer_type=$(nv get customer_type)
+if [ x"${customer_type}" == x"guodian" ];then
+ # fota
+ nv set fota_updateMode=0
+ nv set pwron_auto_check=0
+ # mmi
+ nv set mmi_showmode=led
+ nv set mmi_task_tab=net_task+ctrl_task
+ nv set mmi_led_mode=sleep_mode
+ zte_mmi &
+ # uart
+ nv set self_adaption_port=/dev/ttyS0
+elif [ x"${customer_type}" == x"nandian" ]; then
+ # fota
+ nv set fota_updateMode=0
+ nv set pwron_auto_check=0
+ # mmi
+ nv set mmi_showmode=led
+ nv set mmi_task_tab=net_task+ctrl_task+key_task
+ nv set mmi_led_mode=sleep_mode
+ zte_mmi &
+ # uart
+ nv set self_adaption_port=/dev/ttyS0
+fi
diff --git a/ap/app/Script/scripts/ddns.sh b/ap/app/Script/scripts/ddns.sh
new file mode 100644
index 0000000..baac6c0
--- /dev/null
+++ b/ap/app/Script/scripts/ddns.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+#
+# $Id: ddns.sh,v 1.1 2007-09-24 09:34:52 winfred Exp $
+#
+# usage: ddns.sh
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: ddns.sh start" >> $test_log
+
+srv=`nv get DDNSProvider`
+ddns=`nv get DDNS`
+ddns_hash=`nv get DDNS_Hash_Value`
+u=`nv get DDNSAccount`
+pw=`nv get DDNSPassword`
+ddns_enable=`nv get DDNS_Enable`
+
+killall -q inadyn
+rm -rf $path_conf/inadyn.status
+
+if [ "x$ddns_enable" = "x0" ]; then
+ exit 0
+fi
+if [ "x$srv" = "x" -o "x$srv" = "xnone" ]; then
+ exit 0
+fi
+if [ "x$ddns" = "x" -o "x$u" = "x" -o "x$pw" = "x" ]; then
+ exit 0
+fi
+
+# debug
+echo "srv=$srv"
+echo "ddns=$ddns"
+echo "ddns_hash=$ddns_hash"
+echo "u=$u"
+echo "pw=$pw"
+
+
+if [ "x$srv" = "xdyndns.org" ]; then
+ inadyn -u $u -p $pw -a $ddns --dyndns_system dyndns@$srv &
+elif [ "x$srv" = "xfreedns.afraid.org" ]; then
+ inadyn -u $u -p $pw -a $ddns,$ddns_hash --dyndns_system default@$srv &
+elif [ "x$srv" = "xzoneedit.com" ]; then
+ inadyn -u $u -p $pw -a $ddns --dyndns_system default@$srv &
+elif [ "x$srv" = "xno-ip.com" ]; then
+ inadyn -u $u -p $pw -a $ddns --dyndns_system default@$srv &
+else
+ inadyn -u $u -p $pw -a $ddns --dyndns_system default@$srv &
+ echo "unknown DDNS provider: $srv"
+fi
+
diff --git a/ap/app/Script/scripts/defwan_set.sh b/ap/app/Script/scripts/defwan_set.sh
new file mode 100644
index 0000000..bac6f8f
--- /dev/null
+++ b/ap/app/Script/scripts/defwan_set.sh
@@ -0,0 +1,144 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: defwan_set.sh $1 start" >> $test_log
+nd_dns=`nv get lan_ipaddr`
+#linuxϵͳetcĿ¼¿É¶Áд£¬resolv.conf¿ÉÒÔÖ±½Ó·ÅÔÚetcÏ£¬Í¬²½uc´úÂëʱעÒâ²»Òª½«´Ë´¦Í¬²½
+resolv_conf=/etc/resolv.conf
+dnsmasq_conf=$path_conf/dnsmasq.conf
+
+killall -9 dnsmasq
+def_cid=`nv get default_cid`
+
+if [ "-$1" == "-pswan" ]; then
+ ipaddr_type=`nv get "pdp_act_type"$def_cid`
+elif [ "-$1" == "-ethwan" ]; then
+ ipaddr_type=`nv get eth_act_type`
+elif [ "-$1" == "-wifiwan" ]; then
+ ipaddr_type=`nv get wifi_act_type`
+fi
+
+#»ñȡĬÈÏÍø¿Ú
+wan_if=$defwan_if
+wan6_if=$defwan6_if
+
+echo "" > $dnsmasq_conf
+
+#Èç¹û±¾µØÓ¦ÓÃÐèҪʹÓÃdnsmasqµÄ¹¦ÄÜ£¬ÐèÒªÔÚ"/etc/resolv.conf" ÎļþÖÐÌí¼Ó "127.0.0.1"£¬±ØÐë·ÅÔÚµÚÒ»Ìõ
+echo "" > $resolv_conf
+echo nameserver 127.0.0.1 > $resolv_conf
+
+
+#DNS¶ÔÓÚͬһÍø¿Ú£¬²»Çå³þ½«À´ÐèÇóÊÇ·ñÖ§³Ö·Ö±ð¶Ôv4¡¢v6½øÐÐauto¡¢manualÉèÖ㬴˴¦ÔÝʱ×ö³É¿É·Ö±ðÉèÖÃ
+#ÉèÖÃIPv4 ȱʡ·ÓÉ DNS
+if [ "-$ipaddr_type" == "-IPv4" -o "-$ipaddr_type" == "-IPv4v6" -o "-$ipaddr_type" == "-IPV4V6" -o "-$ipaddr_type" == "-" ];then
+ #ÉèÖÃIPv4µÄĬÈÏÍø¹Ø
+ route del default
+ Flag=`route | grep -w "default"`
+ if [ "-$Flag" != "-" ];then
+ echo "Error: route del default failed." >> $test_log
+ fi
+
+ defwan_gw=`nv get $wan_if"_gw"`
+ if [ "-$defwan_gw" != "-" -o "-$defwan_rel" != "-" ];then
+ route add default gw $defwan_gw dev $defwan_rel 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: route add default gw $defwan_gw dev $defwan_rel failed." >> $test_log
+ fi
+ fi
+
+
+
+
+ #dnsmodeÓÉatserver´¦Àí£¬´«Êµ¼ÊʹÓõÄÖµ£¬´Ë´¦½öʹÓÃÒ»¸önv£¬²»Çø·Öauto manual
+ dns_mode=`nv get $1"_dns_mode"`
+ if [ "-$1" == "-pswan" -o "-$dns_mode" == "-auto" -o "-$dns_mode" == "-" ]; then
+ pridns=`nv get $wan_if"_pridns"`
+ secdns=`nv get $wan_if"_secdns"`
+ elif [ "-$dns_mode" == "-manual" ]; then
+ pridns=`nv get $1"_pridns_manual"`
+ secdns=`nv get $1"_secdns_manual"`
+ fi
+
+ if [ "-$pridns" == "-" -o "-$pridns" == "-0.0.0.0" ] && [ "-$secdns" == "-" -o "-$secdns" == "-0.0.0.0" ]; then
+ pridns="114.114.114.114"
+ secdns="8.8.8.8"
+ fi
+
+ if [ "-$pridns" != "-" -a "-$pridns" != "-0.0.0.0" ]; then
+ echo nameserver $pridns > $dnsmasq_conf
+ fi
+ if [ "-$secdns" != "-" -a "-$secdns" != "-0.0.0.0" ]; then
+ echo nameserver $secdns >> $dnsmasq_conf
+ fi
+
+ dns_extern=`nv get dns_extern`
+ if [ -n "$dns_extern" ]; then
+ echo nameserver $dns_extern >> $dnsmasq_conf
+ fi
+ if [ "-$1" == "-pswan" ]; then
+ tc_tbf.sh up $def_cid
+ fi
+fi
+
+#ÒÑÉèÖúÃÍâÍø¿ÚÔò¿ª×ª·¢
+if [ "-$wan_if" != "-" ]; then
+ echo 1 > /proc/sys/net/ipv4/ip_forward
+fi
+
+#ÉèÖÃIPv6 DNS
+if [ "-$ipaddr_type" == "-IPv6" -o "-$ipaddr_type" == "-IPV6" -o "-$ipaddr_type" == "-IPv4v6" -o "-$ipaddr_type" == "-IPV4V6" ];then
+ #dnsmodeÓÉatserver´¦Àí£¬´«Êµ¼ÊʹÓõÄÖµ£¬´Ë´¦½öʹÓÃÒ»¸önv£¬²»Çø·Öauto manual
+ ipv6_dns_mode=`nv get $1"_ipv6_dns_mode"`
+ if [ "-$1" == "-pswan" -o "-$ipv6_dns_mode" == "-auto" -o "-$ipv6_dns_mode" == "-" ]; then
+ ipv6_pridns=`nv get $wan6_if"_ipv6_pridns_auto"`
+ ipv6_secdns=`nv get $wan6_if"_ipv6_secdns_auto"`
+ elif [ "-$ipv6_dns_mode" == "-manual" ]; then
+ ipv6_pridns=`nv get $1"_ipv6_pridns_manual"`
+ ipv6_secdns=`nv get $1"_ipv6_secdns_manual"`
+ fi
+
+ nv set $wan6_if"_radvd_ipv6_dns_servers"=$ipv6_pridns,$ipv6_secdns
+
+ if [ -n "$ipv6_pridns" ] && [ "$ipv6_pridns" != "::" ] && [ "$ipv6_pridns" != "::0" ] && [ "$ipv6_pridns" != "0000:0000:0000:0000:0000:0000:0000:0000" ];then
+ echo nameserver $ipv6_pridns >> $dnsmasq_conf
+ fi
+
+ if [ -n "$ipv6_secdns" ] && [ "$ipv6_secdns" != "::" ] && [ "$ipv6_secdns" != "::0" ] && [ "$ipv6_secdns" != "0000:0000:0000:0000:0000:0000:0000:0000" ];then
+ echo nameserver $ipv6_secdns >> $dnsmasq_conf
+ fi
+
+ ipv6_dns_extern=`nv get ipv6_dns_extern`
+ if [ -n "$ipv6_dns_extern" ]; then
+ echo nameserver $ipv6_dns_extern >> $dnsmasq_conf
+ fi
+ if [ "-$1" == "-pswan" ]; then
+ tc_tbf.sh up $def_cid
+ fi
+fi
+
+nv set $wan6_if"_radvd_ipv6_dns_servers"=$ipv6_pridns,$ipv6_secdns
+
+#ÉèÖøøÒ³ÃæÏÔʾµ±Ç°ÍâÍøIPµØÖ·
+#ÉèÖÃIPv4Ò³ÃæÏÔʾµØÖ·
+if [ "-$ipaddr_type" == "-IPv4" -o "-$ipaddr_type" == "-IPV4" -o "-$ipaddr_type" == "-IPv4v6" -o "-$ipaddr_type" == "-IPV4V6" -o "-$ipaddr_type" == "-" ]; then
+ wan4_ip=`nv get $wan_if"_ip"`
+ nv set wan_ipaddr="$wan4_ip"
+fi
+
+#ÉèÖÃIPv6Ò³ÃæÏÔʾµØÖ·
+if [ "-$ipaddr_type" == "-IPv6" -o "-$ipaddr_type" == "-IPV6" -o "-$ipaddr_type" == "-IPv4v6" -o "-$ipaddr_type" == "-IPV4V6" ]; then
+ wan6_ip=`nv get $wan6_if"_ipv6_ip"`
+ nv set ipv6_wan_ipaddr="$wan6_ip"
+fi
+
+dnsmasq -i $lan_if -r $dnsmasq_conf &
+
+# ppp0ÐèÒªÉèÖÃMSS×Ϊ1440£¬·ñÔò¿ÉÄÜtcp²»Í¨
+if [ "$defwan_rel" == "ppp0" ]; then
+ echo "Info: dns_set ppp0 set MSS 1440" >> $test_log
+ iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --set-mss 1440
+fi
+
+
diff --git a/ap/app/Script/scripts/firewall_init.sh b/ap/app/Script/scripts/firewall_init.sh
new file mode 100644
index 0000000..b28f885
--- /dev/null
+++ b/ap/app/Script/scripts/firewall_init.sh
@@ -0,0 +1,79 @@
+#!/bin/sh
+# Created by LiuWei @ 2010.8.27
+# init firewall
+#
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: firewall_init.sh start" >> $test_log
+
+
+ZTE_FILTER_CHAIN=macipport_filter
+ZTE_WEB_FILTER_CHAIN=web_filter
+ZTE_CLILDREN_CHAIN=children_filter
+ZTE_CLILDREN_WEB_CHAIN=children_web_filter
+ZTE_CLILDREN_WEB_PHONECHAIN=children_web_filter_phone
+
+#clear filter
+iptables -t filter -F
+iptables -t filter -X $ZTE_FILTER_CHAIN
+iptables -t filter -X $ZTE_WEB_FILTER_CHAIN
+iptables -t filter -X $ZTE_CLILDREN_CHAIN
+iptables -t filter -X $ZTE_CLILDREN_WEB_CHAIN
+iptables -t filter -X $ZTE_CLILDREN_WEB_PHONECHAIN
+
+ip6tables -t filter -F
+ip6tables -t filter -X $ZTE_FILTER_CHAIN
+
+#make a new chain for filter
+iptables -t filter -N $ZTE_FILTER_CHAIN
+iptables -t filter -N $ZTE_WEB_FILTER_CHAIN
+iptables -t filter -N $ZTE_CLILDREN_CHAIN
+iptables -t filter -N $ZTE_CLILDREN_WEB_CHAIN
+iptables -t filter -N $ZTE_CLILDREN_WEB_PHONECHAIN
+ip6tables -t filter -N $ZTE_FILTER_CHAIN
+
+iptables -t filter -A FORWARD -j $ZTE_WEB_FILTER_CHAIN
+iptables -t filter -A FORWARD -j $ZTE_FILTER_CHAIN
+iptables -t filter -A FORWARD -j $ZTE_CLILDREN_CHAIN
+iptables -t filter -A INPUT -j $ZTE_CLILDREN_WEB_CHAIN
+iptables -t filter -A FORWARD -j $ZTE_CLILDREN_WEB_PHONECHAIN
+ip6tables -t filter -A FORWARD -j $ZTE_FILTER_CHAIN
+
+ip6tables -t filter -A $ZTE_FILTER_CHAIN -m state --state RELATED,ESTABLISHED -j ACCEPT
+
+#Close unused port
+iptables -t filter -A INPUT -i $defwan_rel -p udp --dport 53 -j DROP
+iptables -t filter -A INPUT -i $defwan_rel -p tcp --dport 53 -j DROP
+iptables -t filter -A INPUT -p tcp --dport 7777 -j DROP
+iptables -t filter -A INPUT -p udp --dport 7777 -j DROP
+iptables -t filter -I INPUT -i $defwan_rel -p icmp --icmp-type echo-reply -j ACCEPT
+
+permit_gw=`nv get permit_gw`
+permit_nm=`nv get permit_nm`
+if [ "-${permit_gw}" != "-" ]; then
+ iptables -A FORWARD -o $defwan_rel -d $permit_gw/$permit_nm -j ACCEPT
+ iptables -A FORWARD -o $defwan_rel -j DROP
+ iptables -A OUTPUT -o $defwan_rel -d $permit_gw/$permit_nm -j ACCEPT
+ iptables -A OUTPUT -o $defwan_rel -j DROP
+fi
+
+permit_ip6=`nv get permit_ip6`
+if [ "-${permit_ip6}" != "-" ]; then
+ ip6tables -A FORWARD -o $defwan6_rel -d $permit_ip6 -j ACCEPT
+ ip6tables -A FORWARD -o $defwan6_rel -j DROP
+ ip6tables -A OUTPUT -o $defwan6_rel -d $permit_ip6 -j ACCEPT
+ ip6tables -A OUTPUT -o $defwan6_rel -j DROP
+fi
+
+
+if [ "-$defwan_rel" == "-ppp0" ]; then
+ mtu=`nv get mtu`
+ pppoe_mtu=`expr $mtu - 60`
+ iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --set-mss $pppoe_mtu
+else
+ iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
+fi
+# firewall will flush nat and filter, so upnp should run after it.
+#sh $path_sh/upnp.sh
+
diff --git a/ap/app/Script/scripts/fota_release_space.sh b/ap/app/Script/scripts/fota_release_space.sh
new file mode 100755
index 0000000..dfe8908
--- /dev/null
+++ b/ap/app/Script/scripts/fota_release_space.sh
@@ -0,0 +1,40 @@
+#!/bin/sh
+
+echo "Begin release space..."
+
+#ɱµôÓ¦ÓÃ
+killall at_ctl
+killall dnsmasq
+killall radvd
+killall dhcp6
+killall zte_ndp
+killall zte_mainctrl
+killall zte_hotplug
+killall sntp
+killall rtc-service
+killall zte_audio_ctrl
+killall sms
+killall phonebook
+#EC 616000558980
+#killall zte_mmi
+
+killall fluxstat
+killall goahead
+killall wpa_supplicant-2.6
+killall hostapd
+killall zte_volte
+killall wifi_manager
+killall hostapd
+killall udhcpd
+killall sd_hotplug
+
+killall syslogd
+rm -rf /var/log
+
+#EC 616000558980
+killall zte_mifi
+killall zte_cpe
+echo 7 >/proc/sys/vm/drop_caches
+
+#¿ÉÄÜ»¹ÒªÉ¾³ýijЩռÄÚ´æµÄÏß³Ì
+
diff --git a/ap/app/Script/scripts/gateway_send_arp.sh b/ap/app/Script/scripts/gateway_send_arp.sh
new file mode 100644
index 0000000..6a8664a
--- /dev/null
+++ b/ap/app/Script/scripts/gateway_send_arp.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+test_log=`nv get path_log`"te.log"
+
+lan_if=br0
+
+ip=`nv get lan_ipaddr`
+
+arping -U -I $lan_if -c 1 $ip
+
diff --git a/ap/app/Script/scripts/get_errinfo.sh b/ap/app/Script/scripts/get_errinfo.sh
new file mode 100644
index 0000000..5ac323d
--- /dev/null
+++ b/ap/app/Script/scripts/get_errinfo.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+line=`grep "^$1" -n /sbin/app_errmsg.txt | awk -F: '{print $1}'`
+awk -F= -v c=$2 -v n=$line '(NR - n == c) {print $2}' /sbin/app_errmsg.txt
diff --git a/ap/app/Script/scripts/getpid.sh b/ap/app/Script/scripts/getpid.sh
new file mode 100644
index 0000000..bb28f3f
--- /dev/null
+++ b/ap/app/Script/scripts/getpid.sh
@@ -0,0 +1,12 @@
+#/bin/sh
+
+TMPLINE=`ps|grep -s "[[:digit:]]\+:[[:digit:]]\+ \(/.*/\)*$1\>"`
+
+if [ -z "${TMPLINE}" ]; then
+ echo "nono"
+ exit 127
+else
+ echo "${TMPLINE}"|awk '{print $1}'
+ exit 0
+fi
+
diff --git a/ap/app/Script/scripts/global.sh b/ap/app/Script/scripts/global.sh
new file mode 100755
index 0000000..f39ba94
--- /dev/null
+++ b/ap/app/Script/scripts/global.sh
@@ -0,0 +1,87 @@
+#!/bin/sh
+
+#
+#¸Ã½Å±¾ÓÃÓÚ»ñȡһЩͨÓõÄnv±äÁ¿¼°¶¨Ò幫¹²º¯ÊýʹÓÃ
+#
+
+####»ñȡͨÓÃnv±äÁ¿####
+path_conf=`nv get path_conf`
+test_log=`nv get telog_path`
+if [ "$test_log" == "" ]; then
+ test_log=`nv get path_log`"te.log"
+fi
+path_tmp=`nv get path_tmp`
+path_ro=`nv get path_ro`
+
+##getLanIfName
+lan_if=`nv get lan_name`
+#echo "LanIfName=$lan_if"
+
+##getWanIfName
+pswan_name=`nv get pswan`
+def_cid_tmp=`nv get default_cid`
+pswan_if=$pswan_name$def_cid_tmp
+ethwan_if=`nv get ethwan`
+wifiwan_if=`nv get wifiwan`
+
+#ipv4
+defwan_if=`nv get default_wan_name`
+defwan_rel=`nv get default_wan_rel`
+
+#ipv6
+defwan6_if=`nv get default_wan6_name`
+defwan6_rel=`nv get default_wan6_rel`
+
+####¹«¹²º¯Êý####
+#²éÕÒ¶ÔÓ¦dhcpc½ø³ÌºÅ²¢É±ËÀ
+udhcpc_kill()
+{
+ ps > ${path_tmp}/udhcpc.sh.$$
+ udhcpc_pid=`awk 'BEGIN{temp1="'"${wan_if}"'";temp2="'$path_sh/udhcpc.sh'"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/udhcpc.sh.$$`
+ rm -f ${path_tmp}/udhcpc.sh.$$
+ [ -n "$udhcpc_pid" ] && { kill -9 $udhcpc_pid; echo "Info: kill udhcpc $udhcpc_pid " >> $test_log ; }
+}
+#²éÕÒ¶ÔÓ¦pppoe½ø³ÌºÅ²¢É±ËÀ
+pppoe_kill()
+{
+ ps > ${path_tmp}/pppoecd.${wan_if}.$$
+ pppoe_pid=`awk 'BEGIN{temp1="'"${wan_if}"'";temp2="pppoecd"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/pppoecd.${wan_if}.$$`
+ rm -f ${path_tmp}/pppoecd.${wan_if}.$$
+ [ -n "$pppoe_pid" ] && { kill -9 $pppoe_pid; echo "Info: kill pppoecd $pppoe_pid " >> $test_log ; }
+}
+#²éÕÒ¶ÔÓ¦dhcp6s½ø³ÌºÅ²¢É±ËÀ
+dhcp6s_kill()
+{
+ ps > ${path_tmp}/${dhcp6s_conf##*/}.$$
+ dhcp6s_pid=`awk 'BEGIN{temp1="'"${dhcp6s_conf}"'";temp2="dhcp6s"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/${dhcp6s_conf##*/}.$$`
+ rm -f ${path_tmp}/${dhcp6s_conf##*/}.$$
+ [ -n "$dhcp6s_pid" ] && { kill -9 $dhcp6s_pid; echo "Info: kill dhcp6s $dhcp6s_pid " >> $test_log ; }
+}
+
+#²éÕÒ¶ÔÓ¦radvd½ø³ÌºÅ²¢É±ËÀ
+radvd_kill()
+{
+ ps > ${path_tmp}/${radvd_conf##*/}.$$
+ radvd_pid=`awk 'BEGIN{temp1="'"${radvd_conf}"'";temp2="radvd"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/${radvd_conf##*/}.$$`
+ rm -f ${path_tmp}/${radvd_conf##*/}.$$
+ [ -n "$radvd_pid" ] && { kill -9 $radvd_pid; echo "Info: kill radvd $radvd_pid " >> $test_log ; }
+}
+
+#²éÕÒ¶ÔÓ¦dhcp6c½ø³ÌºÅ²¢É±ËÀ
+dhcp6c_kill()
+{
+ ps > ${path_tmp}/dhcp6c.${wan_if}.$$
+ dhcp6c_pid=`awk 'BEGIN{temp1="'"${wan_if}"'";temp2="dhcp6c"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/dhcp6c.${wan_if}.$$`
+ rm -f ${path_tmp}/dhcp6c.${wan_if}.$$
+ [ -n "$dhcp6c_pid" ] && { kill -9 $dhcp6c_pid; echo "Info: kill dhcp6c $dhcp6c_pid " >> $test_log ; }
+}
+
+#²éÕÒ¶ÔÓ¦ndp½ø³ÌºÅ²¢É±ËÀ
+ndp_kill()
+{
+ ps > ${path_tmp}/${ndp_log##*/}.$$
+ ndp_pid=`awk 'BEGIN{temp1="'"${ndp_log}"'";temp2="zte_ndp"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/${ndp_log##*/}.$$`
+ rm -f ${path_tmp}/${ndp_log##*/}.$$
+ [ -n "$ndp_pid" ] && { kill -9 $ndp_pid; echo "Info: kill ndp $ndp_pid " >> $test_log ; }
+}
+
diff --git a/ap/app/Script/scripts/internet.sh b/ap/app/Script/scripts/internet.sh
new file mode 100755
index 0000000..b9ff044
--- /dev/null
+++ b/ap/app/Script/scripts/internet.sh
@@ -0,0 +1,116 @@
+#!/bin/sh
+#
+# internet.sh,v 10.08.05 2010-08-05 15:00:00
+#
+# usage: internet.sh
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: internet.sh start" > $test_log
+echo "Info: `date +%m-%d %H:%M:%S`" >> $test_log
+
+genSysFiles()
+{
+ login=`nv get Login`
+ pass=`nv get Password`
+ echo "$login::0:0:Adminstrator:/:/bin/sh" > /etc/passwd
+ echo "$login:x:0:$login" > /etc/group
+ echo "$login:$pass" > /tmp/tmpchpw
+ chpasswd < /tmp/tmpchpw
+ rm -f /tmp/tmpchpw
+}
+user_login=`cat /etc/passwd | grep admin`
+#user_login²»´æÔÚ»òΪ¿ÕʱºòÖ´Ðк¯ÊýgenSysFiles
+[ -n "$user_login" ] || { genSysFiles;}
+
+safe_run()
+{
+ ps_tmp=`nv get path_log`"ps.tmp"
+ ps > ${ps_tmp}
+ flag=`grep -w "$1" ${ps_tmp}`
+ if [ "-${flag}" = "-" ];then
+ $1 &
+ fi
+ rm -rf ${ps_tmp}
+}
+
+#¶¯Ì¬nvÖÿÕ
+#. $path_sh/cfgnv_init.sh
+pswan=`nv get pswan`
+ethwan=`nv get ethwan`
+wifiwan=`nv get wifiwan`
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"1"/accept_ra
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"2"/accept_ra
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"3"/accept_ra
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"4"/accept_ra
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"5"/accept_ra
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"6"/accept_ra
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"7"/accept_ra
+echo 0 > /proc/sys/net/ipv6/conf/$pswan"8"/accept_ra
+if [ "-$ethwan" != "-" ]; then
+ echo 0 > /proc/sys/net/ipv6/conf/$ethwan/accept_ra
+fi
+if [ "-$wifiwan" != "-" ]; then
+ echo 0 > /proc/sys/net/ipv6/conf/$wifiwan/accept_ra
+fi
+
+#°²È«ÒªÇó
+echo 0 > /proc/sys/net/ipv4/conf/all/send_redirects
+echo 0 > /proc/sys/net/ipv4/conf/default/send_redirects
+echo 0 > /proc/sys/net/ipv4/conf/all/accept_redirects
+echo 0 > /proc/sys/net/ipv4/conf/default/accept_redirects
+echo 0 > /proc/sys/net/ipv6/conf/all/accept_redirects
+echo 0 > /proc/sys/net/ipv6/conf/default/accept_redirects
+echo 0 > /proc/sys/net/ipv4/conf/all/secure_redirects
+echo 0 > /proc/sys/net/ipv4/conf/default/secure_redirects
+
+#EC ÉèÖÃÁ¬½Ó¸ú×Ù×î´óÖµ,·Åµ½rcÀïÃæÅäÖÃ
+#echo 2000 > /proc/sys/net/nf_conntrack_max
+echo 7200 > /proc/sys/net/netfilter/nf_conntrack_tcp_timeout_established
+
+#zte_mainctrl &
+
+#½«br_name,usblan_name´«¸øÄÚºËʵÏÖƽ̨»¯
+fast_usb=`nv get fast_usb`
+lan_enable=`nv get LanEnable`
+
+#LanEnableΪ2ʱºòûÓÐbr£¬²»ÐèҪдbr_name
+if [ "$lan_enable" != "2" ]; then
+ echo $lan_if > /proc/net/br_name
+fi
+
+echo $fast_usb > /proc/net/usb_name
+
+echo "" > /etc/resolv.conf
+
+#br0´î½¨£¬¼°ÄÚÍødhcp
+sh $path_sh/lan.sh
+
+#½«¿ìËÙת·¢¼¶±ð´«¸øÄÚºË
+fastnat_level=`nv get fastnat_level`
+echo "Info: set fastnat_level£º$fastnat_level" >> $test_log
+echo $fastnat_level > /proc/net/fastnat_level
+
+#½«²»Ö§³Ö¿ìËÙת·¢µÄÐÒé¶Ë¿ÚºÅ´«¸øÄÚºË
+nofast_port=`nv get nofast_port`
+echo "Info: set nofast_port£º$nofast_port" >> $test_log
+echo $nofast_port > /proc/net/nofast_port
+
+#SKB debug¿ª¹Ø
+skb_debug=`nv get skb_debug`
+echo "Info: set skb_debug£º$skb_debug" >> $test_log
+if [ "-$skb_debug" != "-1" ]; then
+ echo 0 > /proc/net/skb_debug_off
+fi
+
+killall -9 miniupnpd
+rm -rf $path_conf/inadyn.status
+
+#¼Ç¼½ø³Ì±»ºÎÖÖÐźÅkilledµô
+netdog -s exitsig=1
+
+#¼à¿ØÄÚºËskbÏà¹ØÐÅÏ¢µÄ×î´óÖµ
+#safe_run netmonitor
+
+#¼à¿ØÄں˵Änetlinkʼþ´æÎļþ£¬Ö§³ÖÄÚºË×Ô¶¨Òåʼþ£¬Òò»áдflash°æ±¾Ä¬ÈϹرÕ
+#safe_run event_proc
diff --git a/ap/app/Script/scripts/lan.sh b/ap/app/Script/scripts/lan.sh
new file mode 100755
index 0000000..407c47b
--- /dev/null
+++ b/ap/app/Script/scripts/lan.sh
@@ -0,0 +1,145 @@
+#!/bin/sh
+#
+# $Id: lan.sh
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+br_set()
+{
+ br_name=$lan_if
+
+ #ÉèÖÃÍøÇÅ
+ killall -9 udhcpd
+ echo "ifconfig $br_name down...................."
+ ifconfig $br_name down
+
+ echo "brctl delbr $br_name......................"
+ brctl delbr $br_name
+
+ echo "brctl addbr $br_name......................"
+ brctl addbr $br_name 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl addbr $br_name failed." >> $test_log
+ fi
+ echo "brctl setfd $br_name 0.1.................."
+ brctl setfd $br_name 0.1 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl setfd $br_name 0.1 failed." >> $test_log
+ fi
+ echo "ifconfig lo up......................."
+ ifconfig lo up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig lo up failed." >> $test_log
+ fi
+ echo "ifconfig $br_name up......................"
+ ifconfig $br_name up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br_name up failed." >> $test_log
+ fi
+
+ #´ò¿ªÍøÇŵØÖ·¸Ä±ä֪ͨµÄ¿ª¹Ø
+ echo 1 > /proc/sys/net/ipv4/conf/$br_name/arp_notify
+
+ br_node=`nv get br_node`
+
+ #analysis br_node ex: usb0+wifi0+¡
+ IFS_OLD=$IFS
+ IFS="+"
+ for device in $br_node
+ do
+ ifconfig $device up
+
+ brctl addif $br_name $device 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl addif $br_name $device failed." >> $test_log
+ fi
+ done
+ IFS=$IFS_OLD
+
+}
+
+lan_set()
+{
+ ip=`nv get lan_ipaddr`
+ nm=`nv get lan_netmask`
+ ifconfig $lan_if $ip netmask $nm 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $lan_if $ip netmask $nm failed." >> $test_log
+ fi
+
+ webv6_enable=`nv get webv6_enable`
+ ipv6=`nv get lan_ipv6addr`
+ if [ "x$webv6_enable" == "x1" ]; then
+ ifconfig $lan_if $ipv6
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $lan_if $ipv6 failed." >> $test_log
+ fi
+ fi
+}
+
+#½âÎöÄÚÍøµØÖ·¡¢Íø¹ØµØַͨ¹ýproc»úÖƶ¯Ì¬´«µÝ¸øÄںˣ¬ÒÔ±ãÄÚºËʵÏÖ·ÀÖ¹ÄÚÍøµØַй¶¹¦ÄÜ
+lanip_proc()
+{
+ #ipµØÖ·»»Ëã³É4×Ö½ÚÕûÐÍÊÇÍøÂç×Ö½ÚÐò£¬Òªµßµ¹ÏÂ
+ #uclinux²»Ö§³Ö×óÒÆ×Ö·û
+ ip_value=`echo "$ip" | awk -F '.' '{printf $1 + 256* $2 + 256*256* $3 + 256*256*256* $4}'`
+ nm_value=`echo "$nm" | awk -F '.' '{printf $1 + 256* $2 + 256*256* $3 + 256*256*256* $4}'`
+
+ echo $ip_value > /sys/module/lanip_filter_ipv4/parameters/lan_ipaddr
+ echo $nm_value > /sys/module/lanip_filter_ipv4/parameters/lan_netmask
+}
+
+main()
+{
+ lan_enable=`nv get LanEnable`
+ if [ "x$lan_enable" == "x0" ]; then
+ exit 0
+ fi
+
+ echo "Info: lan.sh start" >> $test_log
+
+ if [ "x$lan_enable" == "x1" ]; then
+ br_set
+ fi
+
+ if [ "x$lan_if" != "x" ]; then
+ lan_set
+ fi
+
+ #vlanÅäÖã¬ÔÝʱ·ÅÓÚ´Ë´¦£¬1 ¿ª»úµÄʱºò²»ÐèÒª½«sw¼ÓÈëµ½ÍøÇÅÏÂ
+ #2 ´Ë´¦±ØÐ뽫sw upÆðÀ´£¬Èç¹û²»upµÄ»°½«²»»áÓÐrj45ÈȲå°Îʼþ
+ sw_name=`nv get swvlan`
+ ifconfig $sw_name up
+ natenable=`nv get natenable`
+ dosenable=`nv get dosenable`
+ if [[ "x$natenable" != "x0" || "x$dosenable" != "x0" ]]; then
+ lanip_proc
+ fi
+ if [ "x$dosenable" != "x0" ]; then
+ echo 1 > /sys/module/fast_common/parameters/lan_dos_enable
+ fi
+
+
+
+
+ echo "" > $path_conf/udhcpd.leases
+
+ . $path_sh/user-config-udhcpd.sh
+
+ dhcp=`nv get dhcpEnabled`
+ if [ "$dhcp" == "1" ]; then
+ echo "Info: config-udhcpd.sh lan -r 1 start" >> $test_log
+ . $path_sh/config-udhcpd.sh "lan" -r 1
+ fi
+
+ dnsmasq -i $lan_if -r $path_conf/resolv.conf &
+ . $path_sh/upnp.sh
+
+ #»ñÈ¡br0µÄipv6µØÖ·
+ ipv6lanipaddrcmd="ifconfig $br_name | grep Scope:Link | sed 's/^.*addr: //g' | sed 's/\/.*$//g'"
+ ipv6lanipaddr=`eval $ipv6lanipaddrcmd`
+ nv set ipv6_lan_ipaddr=$ipv6lanipaddr
+}
+
+main
diff --git a/ap/app/Script/scripts/landev_updown.sh b/ap/app/Script/scripts/landev_updown.sh
new file mode 100644
index 0000000..8bf322e
--- /dev/null
+++ b/ap/app/Script/scripts/landev_updown.sh
@@ -0,0 +1,133 @@
+#!/bin/sh
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: landev_updown.sh $1 $2 start" >> $test_log
+lan_enable=`nv get LanEnable`
+
+xgw_lan()
+{
+ . $path_sh/xjz_init.sh
+ xgwlan=`nv get lan_name`
+ real_gw=`nv get lan_ipaddr`
+ real_nm=`nv get lan_netmask`
+ ifconfig $xgwlan down
+ ifconfig $xgwlan $real_gw netmask $real_nm up
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $xgwlan $real_gw netmask $real_nm up failed." >> $test_log
+ fi
+
+ echo "stop gtp_proxy .... " >> $test_log
+ killall -9 gtp_proxy
+ gtp_proxy &
+ echo "start gtp_proxy .... " >> $test_log
+}
+
+landev_up()
+{
+ if [ "-$1" == "-ethwan" ]; then
+ (router_msg_proxy del_timer ethwan 1>> $test_log 2>&1 || echo "Error: router_msg_proxy del_timer failed." >> $test_log) &
+ fi
+ landev_name=`nv get $1`
+ if [ "-$lan_enable" == "-2" ]; then
+
+ ip=`nv get lan_ipaddr`
+ nm=`nv get lan_netmask`
+ ifconfig $landev_name $ip netmask $nm up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $lan_if $ip netmask $nm failed." >> $test_log
+ fi
+
+ else
+ br_name=`nv get lan_name`
+ ifconfig $landev_name down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $landev_name down failed." >> $test_log
+ fi
+ ifconfig $landev_name up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $landev_name up failed." >> $test_log
+ fi
+ brctl addif $br_name $landev_name
+
+ fi
+}
+
+landev_down()
+{
+ landev_name=`nv get $1`
+ ifconfig $landev_name down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $landev_name down failed." >> $test_log
+ fi
+ if [ "-$lan_enable" == "-1" ]; then
+ br_name=`nv get lan_name`
+ brctl delif $br_name $landev_name 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl delif $br_name $landev_name" >> $test_log
+ fi
+ fi
+ if [ "-$lan_enable" == "-2" ]; then
+ ps > ${path_tmp}/landev_updown.sh.$$
+ udhcpd_pid=`awk 'BEGIN{temp1="'"${landev_name}"'";temp2="'dhcpd'"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/landev_updown.sh.$$`
+ rm -f ${path_tmp}/landev_updown.sh.$$
+ [ -n "$udhcpd_pid" ] && { kill $udhcpd_pid; echo "Info: kill udhcpd $udhcpd_pid " >> $test_log ; }
+ fi
+}
+
+get_cid()
+{
+ ps_ext_cid=$1
+ c_id=${ps_ext_cid##ps_ext}
+}
+
+ps_ext_up()
+{
+ landev_name=`nv get $1`
+ get_cid $1
+ landev_name=`nv get $1`
+ get_cid $1
+ br="br"$c_id
+ br_ip6=`nv get $br"_ipv6_ip"`
+ up_flag="0"
+ if [ "-$br_ip6" != "-" -a "-$br_ip6" != "-::" ]; then
+ up_flag="1"
+ fi
+ br_ip=`nv get $br"_ip"`
+ if [ "-$br_ip" != "-" -a "-$br_ip" != "-0.0.0.0" ]; then
+ up_flag="1"
+ fi
+ if [ "-$up_flag" == "-1" ]; then
+ ifconfig $landev_name up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $landev_name up failed." >> $test_log
+ fi
+ #for usb remove netlink
+ brctl addif $br $landev_name
+ fi
+}
+
+ps_ext_down()
+{
+ landev_name=`nv get $1`
+ ifconfig $landev_name down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $landev_name down failed." >> $test_log
+ fi
+}
+
+if [ "-$1" == "-ethlan" -o "-$1" == "-wifilan" -o "-$1" == "-wifilan2" -o "-$1" == "-usblan" -o "-$1" == "-ethwan" ]; then
+ if [ "-$2" == "-up" ]; then
+ landev_up $1
+ else
+ landev_down $1
+ fi
+else #ps_ext
+ ps_ext_state=`nv get $1"_pdpstate"`
+ if [ "-$ps_ext_state" == "-working" ]; then
+ if [ "-$2" == "-up" ]; then
+ ps_ext_up $1
+ else
+ ps_ext_down $1
+ fi
+ fi
+fi
\ No newline at end of file
diff --git a/ap/app/Script/scripts/nat.sh b/ap/app/Script/scripts/nat.sh
new file mode 100644
index 0000000..1c9b82e
--- /dev/null
+++ b/ap/app/Script/scripts/nat.sh
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# $Id: nat.sh,v 1.4 2009-12-09 08:45:37 steven Exp $
+#
+# usage: nat.sh
+#
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: nat.sh start " >> $test_log
+
+ZTE_FORWARD_CHAIN=port_forward
+ZTE_DMZ_CHAIN=DMZ
+ZTE_MAPPING_CHAIN=port_mapping
+
+iptables -P INPUT ACCEPT
+iptables -P OUTPUT ACCEPT
+iptables -P FORWARD ACCEPT
+
+#clear nat
+iptables -t nat -F
+iptables -t nat -X $ZTE_FORWARD_CHAIN
+iptables -t nat -X $ZTE_DMZ_CHAIN
+iptables -t nat -X $ZTE_MAPPING_CHAIN
+
+
+#Make a new chain for nat
+iptables -t nat -N $ZTE_FORWARD_CHAIN
+iptables -t nat -N $ZTE_DMZ_CHAIN
+iptables -t nat -N $ZTE_MAPPING_CHAIN
+
+iptables -t nat -I PREROUTING 1 -j $ZTE_FORWARD_CHAIN
+iptables -t nat -I PREROUTING 1 -j $ZTE_DMZ_CHAIN
+iptables -t nat -I PREROUTING 1 -j $ZTE_MAPPING_CHAIN
+
+ lan_en=`nv get LanEnable`
+ nat_en=`nv get natenable`
+ if [ "-$nat_en" != "-0" -a "-$lan_en" == "-2" ]; then
+ iptables -t nat -A POSTROUTING -o ${defwan_rel%:*} -j MASQUERADE
+ elif [ "-$nat_en" != "-0" -a "-$lan_en" != "-0" ]; then
+ iptables -t nat -A POSTROUTING -o $defwan_rel -j MASQUERADE
+ fi
+
+clat46_en=1
+ if [ "-$clat46_en" = "-1" ]; then
+ iptables -t nat -A POSTROUTING -o clat4 -j MASQUERADE
+ fi
+
+
diff --git a/ap/app/Script/scripts/netdog_init_set.sh b/ap/app/Script/scripts/netdog_init_set.sh
new file mode 100644
index 0000000..7087c38
--- /dev/null
+++ b/ap/app/Script/scripts/netdog_init_set.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+#
+path_conf=`nv get path_conf`
+test_log=`nv get path_log`"te.log"
+
+br_ipchange_flag=`nv get br_ipchange_flag`
+leak_set_flag=`nv get leak_set_flag`
+
+leak_full_panic=`nv get leak_full_panic`
+skb_max_panic=`nv get skb_max_panic`
+skb_max_fail=`nv get skb_max_fail`
+leak_list_max=`nv get leak_list_max`
+debug_mode=`nv get debug_mode`
+
+if [ "${leak_list_max}" != "" ]; then
+ netdog -s 'leak_list_max='${leak_list_max} &
+ echo "Info: netdog -s 'leak_list_max='${leak_list_max}" >> $test_log
+fi
+if [ "${skb_max_panic}" != "" ]; then
+ netdog -s 'skb_max_panic='${skb_max_panic} &
+ echo "Info: netdog -s 'skb_max_panic='${skb_max_panic}" >> $test_log
+fi
+if [ "${skb_max_fail}" != "" ]; then
+ netdog -s 'skb_max_fail='${skb_max_fail} &
+ echo "Info: netdog -s 'skb_max_fail='${skb_max_fail}" >> $test_log
+fi
+if [ "${leak_full_panic}" != "" ]; then
+ netdog -s 'leak_full_panic='${leak_full_panic} &
+ echo "Info: netdog -s 'leak_full_panic='${leak_full_panic}" >> $test_log
+fi
+if [ "$br_ipchange_flag" != "" ]; then
+ netdog -s 'brip='$br_ipchange_flag &
+ echo "Info: netdog -s 'brip='$br_ipchange_flag" >> $test_log
+fi
+if [ "${leak_set_flag}" != "" ]; then
+ netdog -s 'leak='${leak_set_flag} &
+ echo "Info: netdog -s 'leak='${leak_set_flag}" >> $test_log
+fi
+if [ "${debug_mode}" == "zephyr" ]; then
+ 7100_ip_proxy &
+ echo "Info: debug_mode 'debug_mode='${debug_mode}" >> $test_log
+fi
diff --git a/ap/app/Script/scripts/ppp_updown.sh b/ap/app/Script/scripts/ppp_updown.sh
new file mode 100755
index 0000000..65a674d
--- /dev/null
+++ b/ap/app/Script/scripts/ppp_updown.sh
@@ -0,0 +1,484 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: ppp_updown.sh $1 $2 start" >> $test_log
+
+echo 1 > /proc/sys/net/ipv4/ip_forward
+
+path_sh=`nv get path_sh`
+path_conf=`nv get path_conf`
+c_id=$2
+
+ps_if=`nv get pswan`$c_id
+eth_if=`nv get ppp_name`
+pdp_type=`nv get ppp_pdp_type`
+
+dhcp6s_conf=$path_conf/dhcp6s$c_id.conf
+radvd_conf=$path_conf/radvd$c_id.conf
+ndp_log=$path_conf/ndp$c_id.log
+radvd_pidfile=$path_tmp/radvd$c_id.pid
+
+dnsconfig=0
+
+b_dhcpv6stateEnabled=`nv get dhcpv6stateEnabled`
+b_dhcpv6statelessEnabled=`nv get dhcpv6statelessEnabled`
+
+#ipµØÖ·¸ñʽa.b.c.d
+#»ñÈ¡ip²¢ÅäÖÃps¡¢eth,´Ë´¦IPµØÖ·µÄÅäÖùæÔòΪpdp¼¤»îipµØÖ·×îºóһλµÄ×îºóÒ»¸öbitºÍµ¹ÊýµÚ¶þbit·Ö±ðÈ¡·´£¬¸Ã¹æÔòºóÐø¸ù¾øÐèÇó¿ÉÐÞ¸Ä
+ipaddr_set()
+{
+ pdp_ip=`nv get $ps_if"_ip"`
+ #´Óa.b.c.d»ñÈ¡Ç°Èý×Ö½Úa.b.c
+ ps_ip_abc=${pdp_ip%.*}
+ #´Óa.b.c»ñÈ¡Ç°Á½¸ö×Ö½Úa.b
+ ps_ip_ab=${ps_ip_abc%.*}
+ #´Óa.b.c»ñÈ¡µÚÈý×Ö½Úc
+ ps_ip_c=${ps_ip_abc##*.}
+ #´Óa.b.c.d»ñÈ¡µÚËÄ×Ö½Úd
+ ps_ip_d=${pdp_ip##*.}
+
+ #pdp_ipµÚËÄλµÄ×îºó1bitÈ¡·´
+ [ "$ps_ip_c" -ge "254" ] && { ps_ip_c="250"; }
+ [ "$ps_ip_c" -le "2" ] && { ps_ip_c="10"; }
+ ps_ip_c1=`expr $ps_ip_c + 1`
+ ps_ip_c2=`expr $ps_ip_c - 1`
+
+ ps_ip=$ps_ip_ab"."$ps_ip_c1"."$ps_ip_d
+
+ ifconfig $ps_if $ps_ip netmask 255.255.255.0 up
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if $ps_ip up failed." >> $test_log
+ fi
+ echo "Info: ifconfig $ps_if $ps_ip gw $ps_ip up" >> $test_log
+
+ #pdp_ipµÚËÄλµÄµ¹ÊýµÚ2bitÈ¡·´
+ eth_ip=$ps_ip_ab"."$ps_ip_c2"."$ps_ip_d
+
+
+ nv set $eth_if"_ip"=$eth_ip
+ #ppp0Íø¿ÚÔÚpppdÖÐÒѾup£¬ÎÞÐèÔÙ´Îup
+ ifconfig $eth_if $eth_ip
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $eth_if $eth_ip up failed." >> $test_log
+ fi
+ echo "Info: ifconfig $eth_if $eth_ip up" >> $test_log
+ nv set $ps_if"_pppip"=$ps_ip
+}
+
+#·ÓɹæÔò£¬psÓëeth¼¶Áª
+route_set()
+{
+ marknum=`expr $c_id + 20`
+ iptables -t mangle -A PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 120`
+
+ echo "Info: ip route add default dev $eth_if table $rt_num " >> $test_log
+ ip route add default dev $eth_if table $rt_num
+
+ echo "Info: ip rule add to $pdp_ip fwmark $marknum table $rt_num " >> $test_log
+ ip rule add to $pdp_ip fwmark $marknum table $rt_num
+
+ marknum=`expr $c_id + 10`
+ iptables -t mangle -A PREROUTING -i $eth_if -d ! $eth_ip/24 -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 100`
+
+ echo "Info: ip route add default dev $ps_if table $rt_num " >> $test_log
+ ip route add default dev $ps_if table $rt_num
+
+ echo "Info: ip rule add from $pdp_ip fwmark $marknum table $rt_num " >> $test_log
+ ip rule add from $pdp_ip fwmark $marknum table $rt_num
+
+ ip route flush cache
+
+ #±¾µØÍøÂçÅäÖÃ
+ iptables -t nat -I POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip
+
+ route_info=`route|grep default`
+
+ if [ "$route_info" == "" ];then
+ route add default dev $ps_if
+ else
+ echo "Debug: default route already exist." >> $test_log
+ fi
+}
+
+#ɾ³ý¶ÔÓ¦µÄ·ÓɹæÔò
+route_del()
+{
+ pdp_ip=`nv get $ps_if"_ip"`
+
+ eth_ip=`nv get $eth_if"_ip"`
+
+ ps_ip=`nv get $ps_if"_pppip"`
+
+ marknum=`expr $c_id + 10`
+ rt_num=`expr $c_id + 100`
+
+ iptables -t mangle -D PREROUTING -i $eth_if -d ! $eth_ip/24 -j MARK --set-mark $marknum
+ ip rule del from $pdp_ip fwmark $marknum table $rt_num
+ ip route del default dev $ps_if table $rt_num
+
+ marknum=`expr $c_id + 20`
+ rt_num=`expr $c_id + 120`
+ iptables -t mangle -D PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ ip rule del to $pdp_ip fwmark $marknum table $rt_num
+ ip route del default dev $eth_if table $rt_num
+
+ iptables -t nat -D POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip
+
+ ifconfig $ps_if down
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+
+ #reset nv
+ nv set ppp_cid=""
+ nv set $eth_if"_ip"=0.0.0.0
+ nv set $eth_if"_nm"=0.0.0.0
+ nv set $ps_if"_ip"=0.0.0.0
+ nv set $ps_if"_pridns"=0.0.0.0
+ nv set $ps_if"_secdns"=0.0.0.0
+ nv set $ps_if"_pppip"=0.0.0.0
+}
+
+#############linkup dhcpserver set############
+linkup_add_dns_to_dhcp6s_radvd_conf()
+{
+ #Ö±Á¬Ä£Ê½Ã»ÓÐÊÖ¶¯DNS
+ ipv6_pridns_auto=`nv get $ps_if"_ipv6_pridns_auto"`
+ ipv6_secdns_auto=`nv get $ps_if"_ipv6_secdns_auto"`
+
+ if [ -n "$ipv6_pridns_auto" ] && [ "-$ipv6_pridns_auto" != "-::" ] && [ "-$ipv6_pridns_auto" != "-::0" ];then
+ ipv6_prefer_dns=$ipv6_pridns_auto
+ fi
+
+ if [ -n "$ipv6_secdns_auto" ] && [ "-$ipv6_secdns_auto" != "-::" ] && [ "-$ipv6_secdns_auto" != "-::0" ];then
+ ipv6_standby_dns=$ipv6_secdns_auto
+ fi
+
+ if [ "-$ipv6_prefer_dns" == "-" -a "-$ipv6_standby_dns" == "-" ]; then
+ return
+ else
+ if [ -n "$1" ] && [ "-$1" == "-dhcp6s" ] ;then
+ echo -e "\toption dns_servers $ipv6_prefer_dns $ipv6_standby_dns;" >> $dhcp6s_conf
+ elif [ -n "$1" ] && [ "-$1" == "-radvd" ] ;then
+ # del last line
+ sed -i '$d' $radvd_conf
+ echo -e "\tRDNSS $ipv6_prefer_dns $ipv6_standby_dns\n\t{" >> $radvd_conf
+ echo -e "\t\tAdvRDNSSPreference 15;" >> $radvd_conf
+ echo -e "\t\tAdvRDNSSOpen on;" >> $radvd_conf
+ echo -e "\t};\n};" >> $radvd_conf
+ fi
+
+ if [ "-$dnsconfig" == "-0" ]; then
+ echo "dnsconfig $1 $ipv6_prefer_dns, $ipv6_standby_dns" >> $test_log
+ if [ "-$ipv6_prefer_dns" != "-" ]; then
+ echo "nameserver $ipv6_prefer_dns" >> /etc/resolv.conf
+ fi
+ if [ "-$ipv6_standby_dns" != "-" ]; then
+ echo "nameserver $ipv6_standby_dns" >> /etc/resolv.conf
+ fi
+ dnsconfig=1
+ fi
+ fi
+}
+
+linkup_dhcpv6_set()
+{
+ dhcpv6_start=$pdp_ip
+ dhcpv6_end=$pdp_ip
+
+ #nvÖµ·Ç¿ÕÔò±íʾÓû§ÉèÖÃÁ˾²Ì¬ip¡¢gw
+ gw=`nv get $ps_if"_ipv6_gw"`
+
+ echo -e "interface $eth_if {" > $dhcp6s_conf
+ if [ "-$b_dhcpv6stateEnabled" = "-1" ];then
+ echo -e "\tserver-preference 255;\n\trenew-time 6000;" >> $dhcp6s_conf
+ echo -e "\trebind-time 9000;\n\tprefer-life-time 1300;" >> $dhcp6s_conf
+ echo -e "\tvalid-life-time 2000;\n\tallow rapid-commit;" >> $dhcp6s_conf
+ echo -e "\tlink $eth_if {\n\t\tallow unicast;\n\t\tsend unicast;" >> $dhcp6s_conf
+ echo -e "\t\tpool {\n\t\t\trange $dhcpv6_start to $dhcpv6_end/$prefix_len;" >> $dhcp6s_conf
+ echo -e "\t\t};\n\t};" >> $dhcp6s_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf dhcp6s
+ echo -e "};" >> $dhcp6s_conf
+ dhcp6s -dDf -c $dhcp6s_conf $eth_if &
+ else
+ #slaac with dhcp statelessset dns info
+ if [ "-$b_dhcpv6statelessEnabled" = "-1" ];then
+ echo -e "\tlink $eth_if {\n\t};" >> $dhcp6s_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf dhcp6s
+ echo -e "};" >> $dhcp6s_conf
+ dhcp6s -dDf -c $dhcp6s_conf $eth_if &
+ if [ $? -ne 0 ];then
+ echo "Error: dhcp6s -dDf -c $dhcp6s_conf $eth_if failed." >> $test_log
+ fi
+ fi
+ fi
+}
+
+#»ñÈ¡ip²¢ÅäÖÃps¡¢eth
+ip6addr_set()
+{
+ #disable the forwarding to send RS and not set the addr when receive ra packet
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 0 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+ echo 0 > /proc/sys/net/ipv6/conf/$eth_if/accept_ra
+
+ #call the slaac program to get the prefix addr
+ ifconfig $ps_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if up failed." >> $test_log
+ fi
+ prefix_info_temp=`nv get $ps_if"_ipv6_prefix_info"`
+ #Èç¹ûµ±Ç°Ã»ÓÐǰ׺£¬ÔòÖ±½ÓÆô¶¯slaac£¬Èç¹ûµ±Ç°Ç°×ºÒѾÉèÖã¬Ôò˵Ã÷ÒѾ»ñÈ¡µ½£¬Ö±½ÓÅäÖÃIPµØÖ·¼´¿É
+ if [ -n "$prefix_info_temp" -a "-$prefix_info_temp" != "-::" ]; then
+ ret_code=0
+ else
+ sleep 1
+ interface_id_temp1=`nv get $ps_if"_ipv6_interface_id"`
+ local_ipv6_addr="fe80::"$interface_id_temp1
+ local_ipv6_addr_nv="$ps_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv=$local_ipv6_addr
+ ip -6 addr add $local_ipv6_addr/64 dev $ps_if 2>>$test_log
+ zte_ipv6_slaac -i "$ps_if"
+ ret_code=$?
+ fi
+
+ echo "Info: zte_ipv6_slaac return: $ret_code" >> $test_log
+ echo "the program zte_ipv6_slaac return = $ret_code"
+ if [ $ret_code -eq 0 ]; then
+ echo "the zte_ipv6_slaac success"
+ interface_id_temp=`nv get $ps_if"_ipv6_interface_id"`
+ prefix_info_temp=`nv get $ps_if"_ipv6_prefix_info"`
+
+ echo "##############1##########"
+ echo "$interface_id_temp"
+ echo "$prefix_info_temp"
+ echo "##############2##########"
+
+ #pdp ¼¤»îµÄipv6µØÖ·
+ pdp_ip6=$prefix_info_temp$interface_id_temp
+ #pdp¼¤»îµØÖ·£¬ÊÊÅäÒ³ÃæʹÓÃ
+ nv set ipv6_wan_ipaddr="$pdp_ip6"
+
+ ipv6_addr_conver $pdp_ip6 "$ps_if"
+
+ #¸øeth·ÖÅäµØÖ·£¬Ê¹ÓÃipv6_addr_converÔÚµÚ15+1
+ eth_ip6=`nv get ipv6_br0_addr`
+
+ ip -6 addr add $eth_ip6/64 dev $eth_if
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $eth_ip6/64 dev $eth_if failed." >> $test_log
+ fi
+ #¸øÍâÍø¿Ú·ÖÅäµØÖ·£¬Ê¹ÓÃipv6_addr_converÔÚµÚ15+2
+ ps_ip6=`nv get $ps_if"_dhcpv6_start"`
+ nv set $ps_if"_ipv6_ip"=$ps_ip6
+ ip -6 addr add $ps_ip6/126 dev $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $ps_ip6/126 dev $ps_if failed." >> $test_log
+ fi
+ nv set $ps_if"_ipv6_state"="working"
+
+ echo "Info: zte_ipv6_slaac pdp_ip6: $pdp_ip6" >> $test_log
+ echo "Info: zte_ipv6_slaac ps_ip6: $ps_ip6" >> $test_log
+ echo "Info: zte_ipv6_slaac eth_ip6: $eth_ip6" >> $test_log
+ else
+ echo "the zte_ipv6_slaac fail"
+ nv set $ps_if"_ipv6_state"="dead"
+ exit 1
+ fi
+}
+
+#·ÓɹæÔò£¬psÓëeth¼¶Áª
+route6_set()
+{
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+
+ marknum=`expr $c_id + 60`
+ ip6tables -t mangle -A PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 160`
+ ip -6 route add default dev $eth_if table $rt_num
+ ip -6 rule add to $pdp_ip6/64 fwmark $marknum table $rt_num
+
+ marknum=`expr $c_id + 50`
+ ip6tables -t mangle -A PREROUTING -i $eth_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 150`
+ ip -6 route add default dev $ps_if table $rt_num
+ ip -6 rule add from $pdp_ip6/64 fwmark $marknum table $rt_num
+
+ ip6tables -t filter -A FORWARD -p icmpv6 --icmpv6-type 135 -j DROP
+
+ ip -6 route flush cache
+
+ #Õâ¾äÉèÍ꣬ÀïÃæ¿ÉÒÔpingͨÍâÍøÁË
+ echo "Info: route6_set pdp_ip6=$pdp_ip6" >> $test_log
+
+ ip -6 route add default dev $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route add default dev $ps_if failed." >> $test_log
+ fi
+
+ #enable ipv6 packet forwarding
+ echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 1 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+ echo 1 > /proc/sys/net/ipv6/conf/$eth_if/accept_ra
+ #enable ipv6 neigh discovery proxy
+ echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp
+
+ ndp_kill
+ zte_ndp -a -s $eth_if -d $ps_if -l $ndp_log -p &
+}
+
+#############linkup radvd set############
+linkup_radvd_set()
+{
+ echo "enter linkup_radvd_set "
+
+ prefix_len=64
+
+ rm -rf $radvd_conf
+
+ if [ "-$b_dhcpv6stateEnabled" = "-1" ];then
+ echo -e "interface $eth_if\n{\n\tAdvSendAdvert on;" > $radvd_conf
+ echo -e "\tAdvManagedFlag on;\n};" >> $radvd_conf
+ radvd_kill
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -p $radvd_pidfile&
+ echo "leave linkup_radvd_set "
+ return
+ fi
+
+ echo "Info: psext_updown_ipv6.sh eth_if:$eth_if, prefix_len:$prefix_len" >> $test_log
+ echo "prefix_len:$prefix_len"
+
+ cp $path_ro/radvd_template.conf $radvd_conf
+
+ sed -i -e 's/#ipv6_wan_addr#\/64/#ipv6_wan_addr#\/#prefix_len#/g' $radvd_conf
+ sed -i -e s/br0/$eth_if/g $radvd_conf
+ sed -i -e s/#ipv6_wan_addr#/$eth_ip6/g $radvd_conf
+ sed -i -e s/#prefix_len#/$prefix_len/g $radvd_conf
+ sed -i -e s/#adv_switch#/on/g $radvd_conf
+
+ #slaac with dns info
+ if [ "-$b_dhcpv6statelessEnabled" = "-1" ];then
+ echo "use dhcpv6stateless for dns"
+ else
+ sed -i -e 's/AdvOtherConfigFlag on;/AdvOtherConfigFlag off;/g' $radvd_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf radvd
+ fi
+
+ radvd_kill
+ sleep 1
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -p $radvd_pidfile &
+
+ echo "leave linkup_radvd_set "
+}
+
+#Çå³ýÏàÓ¦µÄradvd½ø³Ì
+linkdown_radvd_set()
+{
+ #¸úÖÕ¶ËÁ¬½ÓµÄÍø¿ÚÖ±½Ó»ádown£¬ËùÒÔ²»ÓÃÏñufiÒ»ÑùÉèÖóÉ1sÓÐЧÆÚ
+ radvd_kill
+}
+
+#Çå³ýÏàÓ¦µÄDHCPv6½ø³Ì
+linkdown_dhcpv6_server_set()
+{
+ dhcp6s_kill
+}
+
+#ɾ³ýÏàÓ¦µÄipv6·ÓɹæÔò
+route6_del()
+{
+ eth_ip6=`nv get ipv6_br0_addr`
+ ps_ip6=`nv get $ps_if"_ipv6_ip"`
+ pdp_ip6=`nv get ipv6_wan_ipaddr`
+
+ ip6tables -t filter -D FORWARD -p icmpv6 --icmpv6-type 135 -j DROP
+
+ marknum=`expr $c_id + 50`
+ rt_num=`expr $c_id + 150`
+ ip -6 rule del from $pdp_ip6/64 fwmark $marknum table $rt_num
+ ip6tables -t mangle -D PREROUTING -i $eth_if -j MARK --set-mark $marknum
+ ip -6 route del default dev $ps_if table $rt_num
+
+ marknum=`expr $c_id + 60`
+ rt_num=`expr $c_id + 160`
+ ip -6 rule del to $pdp_ip6/64 fwmark $marknum table $rt_num
+ ip6tables -t mangle -D PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ ip -6 route del default dev $eth_if table $rt_num
+
+ ip -6 addr del $eth_ip6/64 dev $eth_if
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $eth_ip/64 dev $eth_if failed." >> $test_log
+ #fi
+ ip -6 addr del $ps_ip6/126 dev $ps_if
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $ps_ip6/126 dev $ps_if failed." >> $test_log
+ #fi
+ ip -6 route del default
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 route del default failed." >> $test_log
+ #fi
+
+ ifconfig $eth_if down 2>>$test_log
+ #if [ $? -ne 0 ];then
+ # echo "Error: ifconfig $eth_if down failed." >> $test_log
+ #fi
+ ifconfig $ps_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+
+ echo 0 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+
+ #reset nv
+ nv set ppp_cid=""
+ nv set $ps_if"_pppv6_ip"="::"
+ nv set $ps_if"_ipv6_ip"="::"
+ nv set $ps_if"_ipv6_pridns_auto"="::"
+ nv set $ps_if"_ipv6_secdns_auto"="::"
+ nv set $ps_if"_ipv6_gw"="::"
+ nv set $ps_if"_ipv6_interface_id"="::"
+ nv set $ps_if"_ipv6_prefix_info"="::"
+ nv set $ps_if"_dhcpv6_start"="::"
+ nv set $ps_if"_dhcpv6_end"="::"
+
+ #ÊÊÅäÒ³ÃæµÈÆäËûµØ·½Ê¹ÓÃÀÏNV
+ nv set ipv6_wan_ipaddr="::"
+ nv set $ps_if"_ipv6_state"="dead"
+
+ local_ipv6_addr_nv="$ps_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv="::"
+
+ ndp_kill
+}
+
+if [ "$1" == "linkup" ]; then
+ if [ "$pdp_type" != "IPV6" ]; then
+ ipaddr_set
+ route_set
+ fi
+ if [ "$pdp_type" == "IPV6" -o "$pdp_type" == "IPV4V6" ]; then
+ ip6addr_set
+ route6_set
+ linkup_dhcpv6_set
+ linkup_radvd_set
+ fi
+elif [ "$1" == "linkdown" ]; then
+ if [ "$pdp_type" != "IPV6" ]; then
+ route_del
+ fi
+ if [ "$pdp_type" == "IPV6" -o "$pdp_type" == "IPV4V6" ]; then
+ linkdown_radvd_set
+ linkdown_dhcpv6_server_set
+ route6_del
+ slaac_kill
+ echo "" > /etc/resolv.conf
+ fi
+fi
+
+echo "Info: ppp_updown.sh $1 $2 leave" >> $test_log
diff --git a/ap/app/Script/scripts/pppd_up.sh b/ap/app/Script/scripts/pppd_up.sh
new file mode 100755
index 0000000..db1ba09
--- /dev/null
+++ b/ap/app/Script/scripts/pppd_up.sh
@@ -0,0 +1,28 @@
+#!/bin/sh
+#
+# $Id: lan.sh
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+pppd_auth=`nv get pppd_auth`
+dev_name=$1
+echo "name is $1"
+aa=`echo $dev_name | sed 's/\//\\\\\//g'`
+echo "aa is $aa"
+echo "Info:start pppd!" >> $test_log
+if [ "$pppd_auth" == "auth" ]; then
+ cp $path_ro/options.auth $path_conf/options
+ cp $path_ro/pap-secrets $path_conf/pap-secrets
+ cp $path_ro/chap-secrets $path_conf/chap-secrets
+ sed -i -e "s/#dev_name#/$aa/g" $path_conf/options
+ sed -i -e "s/#dev_name#/$aa/g" $path_conf/options
+ killall -9 pppd
+ pppd &
+elif [ "$pppd_auth" == "noauth" ]; then
+ cp $path_ro/options.noauth $path_conf/options
+ sed -i -e "s/#dev_name#/$aa/g" $path_conf/options
+ sed -i -e "s/#dev_name#/$aa/g" $path_conf/options
+ killall -9 pppd
+ pppd &
+fi
diff --git a/ap/app/Script/scripts/pppoe_dail.sh b/ap/app/Script/scripts/pppoe_dail.sh
new file mode 100755
index 0000000..fc1269f
--- /dev/null
+++ b/ap/app/Script/scripts/pppoe_dail.sh
@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# $Id: pppoe_dail.sh,v 1.1 2007-09-26 01:33:21 winfred Exp $
+#
+# usage: pppoe_dail.sh
+#
+# pppoe_dail.sh,v1.0 2010-09-09 10:00:00 maxiaoliang $
+#
+# usage: pppoe_dail.sh
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: pppoe_dail.sh start " >> $test_log
+
+usage()
+{
+ echo "Usage:"
+ echo " $0 [connect | disconnect]"
+ exit 1
+}
+if [ "$1" = "" ]; then
+ echo "$0: insufficient arguments"
+ usage $0
+fi
+
+killall pppoecd
+
+eth_dial_mode=`nv get ethwan_dialmode`
+
+idle_time=`nv get idle_time`
+wan0=`nv get ethwan`
+
+ if [ "$1" = "connect" ]; then
+ pppoe_user=`nv get pppoe_username`
+ pppoe_pass=`nv get pppoe_cc`
+ if [ "-${pppoe_user}" = "-" -a "-${pppoe_pass}" = "-" ];then
+ echo "WARN: pppoe_user is ${pppoe_user}, pppoe_pass is ${pppoe_pass}, so not connect pppoecd. " >> $test_log
+ else
+ #dial mode
+ if [ "$eth_dial_mode" == "auto" ]; then
+ pppoecd $wan0 -u $pppoe_user -p $pppoe_pass -N 2 -k &
+ elif [ "$eth_dial_mode" == "ondemand" ]; then
+ pppoecd $wan0 -u $pppoe_user -p $pppoe_pass -N 2 -i $idle_time -R -k &
+ elif [ "$eth_dial_mode" == "manual" ]; then
+ pppoecd $wan0 -u $pppoe_user -p $pppoe_pass -N 2 -k &
+ fi
+ fi
+ fi
+
+ if [ "$1" = "disconnect" ]; then
+ echo "pppoe-down: pppoe is disconnected! "
+ sleep 2
+ fi
+
diff --git a/ap/app/Script/scripts/pppoe_updown.sh b/ap/app/Script/scripts/pppoe_updown.sh
new file mode 100644
index 0000000..fbbbb6b
--- /dev/null
+++ b/ap/app/Script/scripts/pppoe_updown.sh
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+echo "Info: pppoe_updown.sh $1 start " >> $test_log
+wan_if=`nv get ethwan`
+. $path_sh/global.sh
+
+pppoe_down()
+{
+ nv set rj45_state="idle"
+ #killall pppoecd
+ (/sbin/router_msg_proxy ipv4 pppoe_updown.sh 1>> $test_log 2>&1 || echo "Error: router_msg_proxy ipv4 pppoe_updown.sh failed." >> $test_log) &
+ if [ $? -ne 0 ];then
+ echo "Error: router_msg_proxy ipv4 failed." >> $test_log
+ fi
+}
+pppoe_up()
+{
+ udhcpc_kill
+ nv set rj45_state="working"
+ nv set eth_curmode="pppoe"
+ (/sbin/router_msg_proxy del_timer ethwan 1>> $test_log 2>&1 || echo "Error: router_msg_proxy del_timer failed." >> $test_log) &
+ if [ $? -ne 0 ];then
+ echo "Error: router_msg_proxy del_timer failed." >> $test_log
+ fi
+ (/sbin/router_msg_proxy ipv4 pppoe_updown.sh 1>> $test_log 2>&1 || echo "Error: router_msg_proxy ipv4 pppoe_updown.sh failed." >> $test_log) &
+ if [ $? -ne 0 ];then
+ echo "Error: router_msg_proxy ipv4 failed." >> $test_log
+ fi
+
+ wan_ip=`nv get $wan_if"_ip"`
+ wan_gw=`nv get $wan_if"_gw"`
+ wan_pri=`nv get ethwan_priority`
+ rt_num=`expr $wan_pri \* 10 `
+ ip rule add from $wan_ip table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip rule add from $wan_ip table $rt_num failed." >> $test_log
+ fi
+ ip route add default via $wan_gw table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route add default via $wan_gw table $rt_num failed." >> $test_log
+ fi
+ ip route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route flush cache failed." >> $test_log
+ fi
+}
+
+if [ "$1" == "up" ]; then
+ pppoe_up
+elif [ "$1" == "down" ]; then
+ pppoe_down
+fi
+
\ No newline at end of file
diff --git a/ap/app/Script/scripts/print_errmsg.sh b/ap/app/Script/scripts/print_errmsg.sh
new file mode 100644
index 0000000..4530abd
--- /dev/null
+++ b/ap/app/Script/scripts/print_errmsg.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+echo "error:"
+grep "\<${1##0}\>" /etc_ro/errmsg.txt|sed -n "s/#define[[:blank:]]\+[a-zA-Z0-9]\+[[:blank:]]\+[0-9]\+[[:blank:]]\+\(.*\)/\1/p" |awk -F'*' '{print $2}'
diff --git a/ap/app/Script/scripts/psext_down.sh b/ap/app/Script/scripts/psext_down.sh
new file mode 100755
index 0000000..b9d3877
--- /dev/null
+++ b/ap/app/Script/scripts/psext_down.sh
@@ -0,0 +1,65 @@
+#!/bin/sh
+test_log=`nv get telog_path`
+if [ "$test_log" == "" ]; then
+ test_log=`nv get path_log`"te.log"
+fi
+echo "Info: psext_down.sh $1 start" >> $test_log
+c_id=$1
+ps_if=`nv get pswan`$c_id
+eth_if=`nv get "ps_ext"$c_id`
+ext_br="br"$c_id
+
+#ɾ³ý¶ÔÓ¦µÄ·ÓɹæÔò
+route_del()
+{
+ pdp_ip=`nv get $ps_if"_pdp_ip"`
+ ps_ip=`nv get $ps_if"_ip"`
+ br_ip=`nv get $ext_br"_ip"`
+ marknum=`expr $c_id + 10`
+ rt_num=`expr $c_id + 100`
+
+ iptables -t mangle -D PREROUTING -i $ext_br -j MARK --set-mark $marknum
+ ip rule del from $pdp_ip fwmark $marknum table $rt_num
+ ip route del default dev $ps_if table $rt_num
+
+ marknum=`expr $c_id + 20`
+ rt_num=`expr $c_id + 120`
+ iptables -t mangle -D PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ ip rule del to $pdp_ip fwmark $marknum table $rt_num
+ ip route del default dev $ext_br table $rt_num
+ #±¾µØÍøÂçÅäÖÃ
+ iptables -t nat -D POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip
+ if [ $? -ne 0 ];then
+ echo "cmd <<iptables -t nat -D POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip>> exec failed" >> $test_log
+ fi
+ route delete default dev $ps_if
+ if [ $? -ne 0 ];then
+ echo "cmd <<route delete default dev $ps_if>> exec failed" >> $test_log
+ fi
+
+ ifconfig $ext_br 0.0.0.0
+ ifconfig $ext_br down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ext_br down failed." >> $test_log
+ fi
+
+ ifconfig $ps_if 0.0.0.0
+ ifconfig $ps_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+
+ #reset nv
+ nv set $ext_br"_ip"=0.0.0.0
+ nv set $ext_br"_nm"=0.0.0.0
+ nv set $ps_if"_pdp_ip"=0.0.0.0
+ nv set $ps_if"_pridns"=0.0.0.0
+ nv set $ps_if"_secdns"=0.0.0.0
+ nv set $ps_if"_ip"=0.0.0.0
+}
+tc_tbf.sh down $c_id
+route_del
+ifconfig $eth_if down
+ifconfig $ext_br down
+brctl delif $ext_br $eth_if
+brctl delbr $ext_br
diff --git a/ap/app/Script/scripts/psext_down_ipv6.sh b/ap/app/Script/scripts/psext_down_ipv6.sh
new file mode 100755
index 0000000..2ce0d21
--- /dev/null
+++ b/ap/app/Script/scripts/psext_down_ipv6.sh
@@ -0,0 +1,84 @@
+#!/bin/sh
+test_log=`nv get telog_path`
+if [ "$test_log" == "" ]; then
+ test_log=`nv get path_log`"te.log"
+fi
+echo "Info: psext_updown_ipv6.sh $ps_if $eth_if $br_if start" >> $test_log
+
+c_id=$1
+ps_if=`nv get pswan`$c_id
+eth_if=`nv get "ps_ext"$c_id`
+br_if="br"$c_id
+
+#删除相应的ipv6路由规则
+linkdown_route_set()
+{
+ br_ip=`nv get $br_if"_ipv6_ip"`
+ ps_ip=`nv get $ps_if"_ipv6_ip"`
+ pdp_ip=`nv get ipv6_wan_ipaddr`
+
+ ip6tables -t filter -D FORWARD -p icmpv6 --icmpv6-type 135 -j DROP
+
+ marknum=`expr $c_id + 50`
+ rt_num=`expr $c_id + 150`
+ ip -6 rule del from $pdp_ip/64 fwmark $marknum table $rt_num
+ ip6tables -t mangle -D PREROUTING -i $br_if -j MARK --set-mark $marknum
+ ip -6 route del default dev $ps_if table $rt_num
+
+ marknum=`expr $c_id + 60`
+ rt_num=`expr $c_id + 160`
+ ip -6 rule del to $pdp_ip/64 fwmark $marknum table $rt_num
+ ip6tables -t mangle -D PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ ip -6 route del default dev $br_if table $rt_num
+
+ ip -6 addr del $br_ip/126 dev $br_if
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $eth_ip/126 dev $eth_if failed." >> $test_log
+ #fi
+ ip -6 addr del $ps_ip/126 dev $ps_if
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $ps_ip/126 dev $ps_if failed." >> $test_log
+ #fi
+ ip -6 route del default
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 route del default failed." >> $test_log
+ #fi
+
+ ifconfig $br_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br_if down failed." >> $test_log
+ fi
+ ifconfig $ps_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+
+ echo 0 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+
+ #reset nv
+ nv set $br_if"_ipv6_ip"="::"
+ nv set $ps_if"_ipv6_ip"="::"
+ nv set $ps_if"_ipv6_pridns_auto"="::"
+ nv set $ps_if"_ipv6_secdns_auto"="::"
+ nv set $ps_if"_ipv6_gw"="::"
+ nv set $ps_if"_ipv6_interface_id"="::"
+ nv set $ps_if"_ipv6_prefix_info"="::"
+ nv set $ps_if"_dhcpv6_start"="::"
+ nv set $ps_if"_dhcpv6_end"="::"
+
+ #适配页面等其他地方使用老NV
+ nv set ipv6_wan_ipaddr="::"
+ nv set $ps_if"_ipv6_state"="dead"
+
+ local_ipv6_addr_nv="$ps_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv="::"
+
+ #ndp_kill
+}
+
+tc_tbf.sh down $c_id
+linkdown_route_set
+brctl delif $br_if $eth_if
+ifconfig $eth_if down
+#echo "" > /etc/resolv.conf
+echo "Info: psext_down_ipv6.sh leave" >> $test_log
diff --git a/ap/app/Script/scripts/psext_up.sh b/ap/app/Script/scripts/psext_up.sh
new file mode 100755
index 0000000..8846ccb
--- /dev/null
+++ b/ap/app/Script/scripts/psext_up.sh
@@ -0,0 +1,104 @@
+#!/bin/sh
+test_log=`nv get telog_path`
+if [ "$test_log" == "" ]; then
+ test_log=`nv get path_log`"te.log"
+fi
+echo "Info: psext_up.sh $1 start" >> $test_log
+path_conf=`nv get path_conf`
+
+echo 1 > /proc/sys/net/ipv4/ip_forward
+c_id=$1
+ps_if=`nv get pswan`$c_id
+eth_if=`nv get "ps_ext"$c_id`
+ext_br="br"$c_id
+pidfile=$path_conf"/udhcpd"$c_id".pid"
+confile=$path_conf"/udhcpd"$c_id".conf"
+leases=$path_conf"/udhcpd"$c_id".leases"
+
+arp_proxy_set()
+{
+ (zte_arp_proxy -i $ext_br 2>> $test_log || echo "Error: zte_arp_proxy -i $ext_br failed." >> $test_log) &
+}
+
+dhcp_set()
+{
+ mask=`nv get $ext_br"_nm"`
+ ifconfig $ext_br netmask $mask 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $eth_br netmask $mask failed." >> $test_log
+ fi
+ if [ -e ${pidfile} ]; then
+ kill `cat $pidfile`
+ rm -f $pidfile
+ fi
+ touch $leases
+ udhcpd -f $confile &
+}
+
+#»ñÈ¡ip²¢ÅäÖÃps¡¢eth
+get_ipaddr()
+{
+ pdp_ip=`nv get $ps_if"_pdp_ip"`
+ ps_ip=`nv get $ps_if"_ip"`
+ br_ip=`nv get $ext_br"_ip"`
+ ifconfig $ps_if $ps_ip netmask 255.255.255.0 up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if $ps_ip up failed." >> $test_log
+ fi
+ nv set default_wan_rel=$ps_if
+ nv set default_cid=$c_id
+ nv set $ext_br"_ip"=$br_ip
+ ifconfig $ext_br $br_ip 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ext_br $br_ip up failed." >> $test_log
+ fi
+}
+#·ÓɹæÔò£¬psÓëeth¼¶Áª
+route_set()
+{
+ marknum=`expr $c_id + 20`
+ iptables -t mangle -A PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 120`
+
+ ip route add default dev $ext_br table $rt_num
+
+ ip rule add to $pdp_ip fwmark $marknum table $rt_num
+
+ marknum=`expr $c_id + 10`
+ iptables -t mangle -A PREROUTING -i $ext_br -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 100`
+
+ ip route add default dev $ps_if table $rt_num
+ ip rule add from $pdp_ip fwmark $marknum table $rt_num
+
+ ip route flush cache
+
+ #±¾µØÍøÂçÅäÖÃ
+ iptables -t nat -I POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip
+
+ route_info=`route|grep default`
+
+ if [ "$route_info" == "" ];then
+ route add default dev $ps_if
+ else
+ echo "Debug: default route already exist." >> $test_log
+ fi
+}
+
+mtu=`nv get mtu`
+ifconfig $ps_if mtu $mtu
+brctl addbr $ext_br
+brctl setfd $ext_br 0.1
+brctl addif $ext_br $eth_if
+ifconfig $ext_br up
+get_ipaddr
+dhcp_set
+route_set
+arp_proxy_set
+ifconfig $eth_if up
+ismbim=`ps |grep -v grep |grep -w mbim |awk '{printf $1}'`
+if [ "-$ismbim" != "-" ]; then
+ eth_mac=`cat "/sys/class/net/"$eth_if"/address"`
+ arp -s $pdp_ip $eth_mac -i $ext_br 2>>$test_log
+fi
+tc_tbf.sh up $c_id
diff --git a/ap/app/Script/scripts/psext_up_ipv6.sh b/ap/app/Script/scripts/psext_up_ipv6.sh
new file mode 100755
index 0000000..07ef6dc
--- /dev/null
+++ b/ap/app/Script/scripts/psext_up_ipv6.sh
@@ -0,0 +1,114 @@
+#!/bin/sh
+test_log=`nv get telog_path`
+if [ "$test_log" == "" ]; then
+ test_log=`nv get path_log`"te.log"
+fi
+
+c_id=$1
+path_conf=`nv get path_conf`
+path_tmp=`nv get path_tmp`
+dhcp6s_conf=$path_conf/dhcp6s$c_id.conf
+radvd_conf=$path_conf/radvd$c_id.conf
+ndp_log=$path_conf/ndp$c_id.log
+radvd_pidfile=$path_tmp/radvd$c_id.pid
+
+ps_if=`nv get pswan`$c_id
+eth_if=`nv get "ps_ext"$c_id`
+br_if="br"$c_id
+
+echo "Info: psext_updown_ipv6.sh $ps_if $eth_if $br_if start" >> $test_log
+
+prefix_len=`nv get $ps_if"_ipv6_prefix_len"`
+br_ip=`nv get $br_if"_ipv6_ip"`
+ps_ip=`nv get $ps_if"_ipv6_ip"`
+pdp_ip=`nv get $ps_if"_ipv6_pdp"`
+local_ipv6_addr=`nv get $ps_if"_ipv6_local"`
+
+#获取ip并配置ps、eth
+linkup_get_addr()
+{
+ #disable the forwarding to send RS and not set the addr when receive ra packet
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 0 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+ echo 0 > /proc/sys/net/ipv6/conf/$eth_if/accept_ra
+ echo 0 > /proc/sys/net/ipv6/conf/$br_if/accept_ra
+ #call the slaac program to get the prefix addr
+ ifconfig $ps_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if up failed." >> $test_log
+ fi
+ ip -6 addr add $local_ipv6_addr/64 dev $ps_if 2>>$test_log
+ brctl addbr $br_if
+ brctl setfd $br_if 0.1
+ ifconfig $br_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br_if up failed." >> $test_log
+ fi
+ ip -6 addr add $br_ip/64 dev $br_if
+ ip -6 addr add $ps_ip/126 dev $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $ps_ip/126 dev $ps_if failed." >> $test_log
+ fi
+ nv set $ps_if"_ipv6_state"="working"
+}
+
+#路由规则，ps与eth级联
+linkup_route_set()
+{
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+
+ marknum=`expr $c_id + 60`
+ ip6tables -t mangle -A PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 160`
+ ip -6 route add default dev $br_if table $rt_num
+ ip -6 rule add to $pdp_ip/64 fwmark $marknum table $rt_num
+
+ marknum=`expr $c_id + 50`
+ ip6tables -t mangle -A PREROUTING -i $br_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 150`
+ ip -6 route add default dev $ps_if table $rt_num
+ ip -6 rule add from $pdp_ip/64 fwmark $marknum table $rt_num
+
+ ip6tables -t filter -A FORWARD -p icmpv6 --icmpv6-type 135 -j DROP
+
+ ip -6 route flush cache
+
+ #这句设完，里面可以ping通外网了
+ echo "Info: route_set ps_ip=$ps_ip" >> $test_log
+ #ip -6 route add default via $ps_ip dev $ps_if
+ ip -6 route add default dev $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route add default dev $ps_if failed." >> $test_log
+ fi
+
+ #enable ipv6 packet forwarding
+ echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 1 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+ echo 1 > /proc/sys/net/ipv6/conf/$eth_if/accept_ra
+ echo 1 > /proc/sys/net/ipv6/conf/$br_if/accept_ra
+ #enable ipv6 neigh discovery proxy
+ echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp
+
+ zte_ndp -a -s $br_if -d $ps_if -l $ndp_log -p &
+}
+
+linkup_dhcpv6_set()
+{
+ dhcp6s -dDf -c $dhcp6s_conf $br_if &
+}
+
+linkup_radvd_set()
+{
+ radvd -d 3 -C $radvd_conf -p $radvd_pidfile &
+}
+
+mtu=`nv get mtu`
+ifconfig $ps_if mtu $mtu
+linkup_get_addr
+linkup_route_set
+linkup_dhcpv6_set
+linkup_radvd_set
+brctl addif $br_if $eth_if
+ifconfig $eth_if up
+tc_tbf.sh up $c_id
+echo "Info: psext_up_ipv6.sh leave" >> $test_log
diff --git a/ap/app/Script/scripts/psext_updown.sh b/ap/app/Script/scripts/psext_updown.sh
new file mode 100755
index 0000000..9b4650e
--- /dev/null
+++ b/ap/app/Script/scripts/psext_updown.sh
@@ -0,0 +1,476 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: psext_updown.sh $1 $2 start" >> $test_log
+
+echo 1 > /proc/sys/net/ipv4/ip_forward
+c_id=$2
+ps_if=`nv get pswan`$c_id
+eth_if=`nv get "ps_ext"$c_id`
+ext_br="br"$c_id
+ps_ext_mode=`nv get need_jilian`
+#Óû§ÉèÖþ²Ì¬ip¡¢gw£¬nmÔÚ´Ë´¦¼ÆËã
+arp_proxy_kill()
+{
+ ps > ${path_tmp}/zte_arp_proxy.$ext_br.$$
+ arp_proxy_pid=`awk 'BEGIN{temp1="'"${ext_br}"'";temp2="zte_arp_proxy"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/zte_arp_proxy.$ext_br.$$`
+ rm -f ${path_tmp}/zte_arp_proxy.$ext_br.$$
+ [ -n "$arp_proxy_pid" ] && { kill $arp_proxy_pid; echo "test: kill udhcpc $arp_proxy_pid " >> $test_log ; }
+}
+
+arp_proxy_set()
+{
+ arp_proxy_kill
+ (zte_arp_proxy -i $ext_br 2>> $test_log || echo "Error: zte_arp_proxy -i $ext_br failed." >> $test_log) &
+}
+
+get_mask()
+{
+ mask=`echo ${ps_ip}"."${gw} | awk -F '.' '{
+ nm1=0;nm2=0;nm3=0
+ if($1 == $5)
+ nm1=255
+
+ if(255 == nm1 && $2 == $6)
+ nm2=255
+
+ if(255 == nm2 && $3 == $7)
+ nm3=255
+
+ printf nm1"."nm2"."nm3".0"
+ }'`
+}
+
+dhcp_set()
+{
+
+ start=$pdp_ip
+ end=$pdp_ip
+ #nvÖµ·Ç¿ÕÔò±íʾÓû§ÉèÖÃÁ˾²Ì¬ip¡¢gw
+ gw=`nv get $ps_if"_gw"`
+ if [ "-$gw" == "-" -o "-$gw" == "-0.0.0.0" ]; then
+ gw=$br_ip
+ mask=$valid_mask
+ echo psip $ps_ip br_ip $br_ip valid_mask $valid_mask $mask
+ else
+ echo "no mask"
+ get_mask
+ fi
+ nv set $ext_br"_nm"=$mask
+ ifconfig $ext_br netmask $mask 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $eth_br netmask $mask failed." >> $test_log
+ fi
+ dns=`nv get $ps_if"_pridns"`
+ dns2=`nv get $ps_if"_secdns"`
+ lease="86400"
+
+ #±¾µØÍøÂçÅäÖÃ
+ if [ "-$dns" == "-" -o "-$dns" == "-0.0.0.0" ] && [ "-$dns2" == "-" -o "-$dns2" == "-0.0.0.0" ]; then
+ echo "Error: no valid dns, use default dns." >> $test_log
+ dns="114.114.114.114"
+ dns2="8.8.8.8"
+ fi
+ rm -rf $path_conf"/udhcpd"$c_id".conf"
+ touch $path_conf"/udhcpd"$c_id".conf"
+ echo " " > $path_conf"/udhcpd"$c_id".conf"
+
+ if [ "-$dns" != "-" -a "-$dns" != "-0.0.0.0" ]; then
+ echo "nameserver $dns" >> /etc/resolv.conf
+ fi
+ if [ "-$dns2" != "-" -a "-$dns2" != "-0.0.0.0" ]; then
+ echo "nameserver $dns2" >> /etc/resolv.conf
+ fi
+
+ pidfile=$path_conf"/udhcpd"$c_id".pid"
+ leasesfile=$path_conf"/udhcpd"$c_id".leases"
+
+ sh $path_sh/config-udhcpd.sh $c_id -s $start
+ sh $path_sh/config-udhcpd.sh $c_id -e $end
+ sh $path_sh/config-udhcpd.sh $c_id -i $ext_br
+ sh $path_sh/config-udhcpd.sh $c_id -m $mask
+ sh $path_sh/config-udhcpd.sh $c_id -d $dns $dns2
+ if [ "-$gw" != "-" ]; then
+ sh $path_sh/config-udhcpd.sh $c_id -g $gw
+ fi
+ if [ "-$lease" != "-" ]; then
+ sh $path_sh/config-udhcpd.sh $c_id -t $lease
+ fi
+ sh $path_sh/config-udhcpd.sh $c_id -p $pidfile
+ sh $path_sh/config-udhcpd.sh $c_id -l $leasesfile
+ sh $path_sh/config-udhcpd.sh $c_id -r 1
+}
+get_validnum()
+{
+ last4=${ipaddr##*.}
+ ipaddr=${ipaddr%.*}
+ mark=`expr $last4 % 2`
+ last3=0
+ frag=`expr $frag + 1`
+ echo $ipaddr $last4 $last3
+ if [ $last4 -eq 0 ] || [ $last4 -eq 255 ];
+ then
+ last3=${ipaddr##*.}
+ fi
+ if [ $last4 -eq 0 ] && [ $last3 -eq 0 ];
+ then
+ get_validnum
+ elif [ $last4 -eq 255 ] && [ $last3 -eq 255 ];
+ then
+ get_validnum
+ else
+ return
+ fi
+}
+get_netmask_btrunk()
+{
+ pdpip=$1
+ pdp_ip4=${pdpip##*.}
+ front3=${pdpip%.*}
+
+ if [ $pdp_ip4 -eq 1 ];then
+ tmp_ip1=`expr $pdp_ip4 + 1`
+ tmp_ip2=`expr $pdp_ip4 + 2`
+ ps_ip="$front3.$tmp_ip1"
+ br_ip="$front3.$tmp_ip2"
+ elif [ $pdp_ip4 -eq 254 ];then
+ tmp_ip1=`expr $pdp_ip4 - 2`
+ tmp_ip2=`expr $pdp_ip4 - 1`
+ ps_ip="$front3.$tmp_ip1"
+ br_ip="$front3.$tmp_ip2"
+ else
+ tmp_ip1=`expr $pdp_ip4 - 1`
+ tmp_ip2=`expr $pdp_ip4 + 1`
+ ps_ip="$front3.$tmp_ip1"
+ br_ip="$front3.$tmp_ip2"
+ fi
+
+ nv set $ps_if"_ip"=$ps_ip
+ valid_mask="255.255.0.0"
+}
+
+get_netmask()
+{
+ ipaddr=$1
+ last4=0
+ last3=0
+ mark=0
+ frag=0
+
+ get_validnum
+ echo $ipaddr $last4 $last3 $mark $frag
+ #½«ÓÐЧ¶ÎÖÐÓÐЧλÖÃΪ1£¬¸Ãλ×ó±ß¶¼ÖÃΪ0
+ valid_num=0
+
+ if [ $mark -eq 1 -a $last3 -eq 0 ];then
+ valid_num=`expr $last4 + 1`
+ elif [ $mark -eq 0 -a $last3 -eq 0 ];then
+ valid_num=$last4
+ elif [ $mark -eq 1 -a $last3 -ne 0 ];then
+ valid_num=`expr $last3 + 1`
+ elif [ $mark -eq 0 -a $last3 -ne 0 ];then
+ valid_num=$last3
+ fi
+ echo $valid_num
+ #´Ó×óÏòÓÒÕÒµ½ÓÐЧ¶ÎÖеÚÒ»¸ö1µÄλÖÃ
+ place=1
+ while [ `expr $valid_num % 2` -eq 0 ]
+ do
+ place=`expr $place + 1`
+ valid_num=`expr $valid_num / 2`
+ done
+
+ if [ $last3 -eq 0 ]
+ then
+ frag=`expr $frag - 1`
+ fi
+ count=1
+
+ if [ $place -gt 8 ]
+ then
+ place=`expr $place - 8`
+ frag=`expr $frag + 1`
+ fi
+
+ tmp_place=$place
+ while [ $tmp_place -gt 0 ]
+ do
+ count=`expr $count \* 2`
+ tmp_place=`expr $tmp_place - 1`
+ done
+
+ #ÖÁÉÙÐèÒªÈý¸öÓÐЧipµØÖ·£¨ps¿Ú£¬pc£¬Íø¹Ø£©£¬ÑÚÂë×î´óΪ255.255.255.248
+ if [ $frag -eq 0 -a $place -eq 2 ]
+ then
+ count=`expr $count + 3`
+ else
+ count=`expr $count - 1`
+ fi
+
+ before=$frag
+
+ while [ $before -lt 3 ]
+ do
+ valid_mask=$valid_mask"255."
+ before=`expr $before + 1`
+ done
+ valid_mask=$valid_mask"`expr 255 - $count`"
+ while [ $frag -gt 0 ]
+ do
+ valid_mask=$valid_mask".0"
+ frag=`expr $frag - 1`
+ done
+
+ pdpip=$1
+ pdp_ip4=${pdpip##*.}
+ pdp_ip4_tmp=$pdp_ip4
+ front3=${pdpip%.*}
+
+ tmp_count=0
+ com_num=0
+ while [ $tmp_count -lt 3 ]
+ do
+ valid_count=0
+
+ if [ `expr $pdp_ip4_tmp % 2` -eq 1 ]
+ then
+ tmp_count1=$tmp_count
+ valid_count=1
+ while [ $tmp_count1 -gt 0 ]
+ do
+ valid_count=`expr $valid_count \* 2`
+ tmp_count1=`expr $tmp_count1 - 1`
+ done
+ fi
+ com_num=`expr $com_num + $valid_count`
+ tmp_count=`expr $tmp_count + 1`
+ pdp_ip4_tmp=`expr $pdp_ip4_tmp / 2`
+ done
+ echo com_num $com_num
+
+ if [ $com_num -gt 2 ]
+ then
+ tmp_ip1=`expr $pdp_ip4 - 1`
+ tmp_ip2=`expr $pdp_ip4 - 2`
+ ps_ip="$front3.$tmp_ip1"
+ br_ip="$front3.$tmp_ip2"
+ else
+ tmp_ip1=`expr $pdp_ip4 + 1`
+ tmp_ip2=`expr $pdp_ip4 + 2`
+ ps_ip="$front3.$tmp_ip1"
+ br_ip="$front3.$tmp_ip2"
+ fi
+
+ echo ps_ip $ps_ip br_ip $br_ip valid_mask $valid_mask
+ nv set $ps_if"_ip"=$ps_ip
+}
+#»ñÈ¡ip²¢ÅäÖÃps¡¢eth
+get_ipaddr()
+{
+ pdp_ip=`nv get $ps_if"_pdp_ip"`
+#ÅжÏÊÇ·ÊÇñbtrunkÐͺŻú
+ btrunk=`cat /sys/module/fast_common/parameters/btrunk_fw`
+ if [ "$btrunk" -eq "0" ];then
+ get_netmask $pdp_ip
+ else
+ get_netmask_btrunk $pdp_ip
+ fi
+
+ ifconfig $ps_if $ps_ip netmask 255.255.255.0 up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if $ps_ip up failed." >> $test_log
+ fi
+ nv set default_wan_rel=$ps_if
+ nv set default_cid=$c_id
+ nv set $ext_br"_ip"=$br_ip
+ ifconfig $ext_br $br_ip 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ext_br $br_ip up failed." >> $test_log
+ fi
+}
+#·ÓɹæÔò£¬psÓëeth¼¶Áª
+route_set()
+{
+ marknum=`expr $c_id + 20`
+ iptables -t mangle -A PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 120`
+
+ ip route add default dev $ext_br table $rt_num
+
+ ip rule add to $pdp_ip fwmark $marknum table $rt_num
+
+ marknum=`expr $c_id + 10`
+ iptables -t mangle -A PREROUTING -i $ext_br -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 100`
+
+ ip route add default dev $ps_if table $rt_num
+ ip rule add from $pdp_ip fwmark $marknum table $rt_num
+
+ ip route flush cache
+
+ #±¾µØÍøÂçÅäÖÃ
+ iptables -t nat -I POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip
+
+ route_info=`route|grep default`
+
+ if [ "$route_info" == "" ];then
+ route add default dev $ps_if
+ else
+ echo "Debug: default route already exist." >> $test_log
+ fi
+}
+#¹¹½¨ÍøÇÅ
+br_up()
+{
+ br="br"$c_id
+ brctl addbr $br
+ brctl setfd $br 0.1
+ ifconfig $br up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br up failed." >> $test_log
+ fi
+
+ ifconfig $ps_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if up failed." >> $test_log
+ fi
+ brctl addif $br $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl addif $br $ps_if failed." >> $test_log
+ fi
+ brctl addif $br $eth_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl addif $br $eth_if failed." >> $test_log
+ fi
+ ifconfig $eth_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $eth_if up failed." >> $test_log
+ fi
+
+}
+#ɾ³ýÍøÇÅ
+br_down()
+{
+ br="br"$c_id
+ brctl delif $br $eth_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl delif $br $eth_if failed." >> $test_log
+ fi
+ ifconfig $eth_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $eth_if down failed." >> $test_log
+ fi
+ brctl delif $br $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl delif $br $ps_if failed." >> $test_log
+ fi
+ ifconfig $ps_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+ ifconfig $br down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br down failed." >> $test_log
+ fi
+ brctl delbr $br 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl delbr $br failed." >> $test_log
+ fi
+}
+#ɱËÀ¶ÔÓ¦µÄDHCP½ø³Ì
+dhcp_kill()
+{
+ pidfile=$path_conf"/udhcpd"$c_id".pid"
+ kill `cat $pidfile`
+}
+#ɾ³ý¶ÔÓ¦µÄ·ÓɹæÔò
+route_del()
+{
+ pdp_ip=`nv get $ps_if"_pdp_ip"`
+# ps_ip1=${pdp_ip%.*}
+# ps_ip2=${pdp_ip##*.}
+# [ "$ps_ip2" -ge "254" ] && { ps_ip2="250"; }
+# ps_ip2=`expr $ps_ip2 + 1`
+ ps_ip=`nv get $ps_if"_ip"`
+ br_ip=`nv get $ext_br"_ip"`
+ marknum=`expr $c_id + 10`
+ rt_num=`expr $c_id + 100`
+
+ iptables -t mangle -D PREROUTING -i $ext_br -j MARK --set-mark $marknum
+ ip rule del from $pdp_ip fwmark $marknum table $rt_num
+ ip route del default dev $ps_if table $rt_num
+
+ marknum=`expr $c_id + 20`
+ rt_num=`expr $c_id + 120`
+ iptables -t mangle -D PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ ip rule del to $pdp_ip fwmark $marknum table $rt_num
+ ip route del default dev $ext_br table $rt_num
+ #±¾µØÍøÂçÅäÖÃ
+ iptables -t nat -D POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip
+ if [ $? -ne 0 ];then
+ echo "cmd <<iptables -t nat -D POSTROUTING -s $ps_ip -o $ps_if -j SNAT --to $pdp_ip>> exec failed" >> $test_log
+ fi
+ route delete default dev $ps_if
+ if [ $? -ne 0 ];then
+ echo "cmd <<route delete default dev $ps_if>> exec failed" >> $test_log
+ fi
+
+ ifconfig $ext_br 0.0.0.0
+ ifconfig $ext_br down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ext_br down failed." >> $test_log
+ fi
+
+ ifconfig $ps_if 0.0.0.0
+ ifconfig $ps_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+
+ #reset nv
+ nv set $ext_br"_ip"=0.0.0.0
+ nv set $ext_br"_nm"=0.0.0.0
+ nv set $ps_if"_pdp_ip"=0.0.0.0
+ nv set $ps_if"_pridns"=0.0.0.0
+ nv set $ps_if"_secdns"=0.0.0.0
+ nv set $ps_if"_ip"=0.0.0.0
+}
+
+if [ "-$1" == "-linkup" ]; then
+ mtu=`nv get mtu`
+ ifconfig $ps_if mtu $mtu
+ if [ "-$ps_ext_mode" == "-1" ]; then
+ brctl addbr $ext_br
+ brctl setfd $ext_br 0.1
+ brctl addif $ext_br $eth_if
+ ifconfig $ext_br up
+ get_ipaddr
+ dhcp_set
+ route_set
+ arp_proxy_set
+ ifconfig $eth_if up
+ ismbim=`ps |grep -v grep |grep -w mbim |awk '{printf $1}'`
+ if [ "-$ismbim" != "-" ]; then
+ eth_mac=`cat "/sys/class/net/"$eth_if"/address"`
+ arp -s $pdp_ip $eth_mac 2>>$test_log
+ fi
+ tc_tbf.sh up $c_id
+ elif [ "-$ps_ext_mode" == "-0" ]; then
+ br_up
+ fi
+elif [ "-$1" == "-linkdown" ]; then
+ if [ "-$ps_ext_mode" == "-1" ]; then
+ tc_tbf.sh down $c_id
+ arp_proxy_kill
+ dhcp_kill
+ route_del
+ ifconfig $eth_if down
+ ifconfig $ext_br down
+ brctl delif $ext_br $eth_if
+ brctl delbr $ext_br
+ echo "" > /etc/resolv.conf
+ elif [ "-$ps_ext_mode" == "-0" ]; then
+ br_down
+ fi
+fi
diff --git a/ap/app/Script/scripts/psext_updown_ipv6.sh b/ap/app/Script/scripts/psext_updown_ipv6.sh
new file mode 100755
index 0000000..a48bd73
--- /dev/null
+++ b/ap/app/Script/scripts/psext_updown_ipv6.sh
@@ -0,0 +1,446 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+#echo "Info: psext_updown_ipv6.sh $1 $2 start" >> $test_log
+
+c_id=$2
+
+dhcp6s_conf=$path_conf/dhcp6s$c_id.conf
+radvd_conf=$path_conf/radvd$c_id.conf
+ndp_log=$path_conf/ndp$c_id.log
+radvd_pidfile=$path_tmp/radvd$c_id.pid
+
+ps_if=`nv get pswan`$c_id
+eth_if=`nv get "ps_ext"$c_id`
+ps_ext_mode=`nv get need_jilian`
+br_if="br"$c_id
+dnsconfig=0
+prefix_len=64
+echo "Info: psext_updown_ipv6.sh $ps_ext_mode $ps_if $eth_if $br_if start" >> $test_log
+
+b_dhcpv6stateEnabled=`nv get dhcpv6stateEnabled`
+b_dhcpv6statelessEnabled=`nv get dhcpv6statelessEnabled`
+
+#采用PDP激活方式，没有dhcp6c进程
+
+#############linkup dhcpserver set############
+linkup_add_dns_to_dhcp6s_radvd_conf()
+{
+ #直连模式没有手动DNS
+ ipv6_pridns_auto=`nv get $ps_if"_ipv6_pridns_auto"`
+ ipv6_secdns_auto=`nv get $ps_if"_ipv6_secdns_auto"`
+
+ if [ -n "$ipv6_pridns_auto" ] && [ "-$ipv6_pridns_auto" != "-::" ] && [ "-$ipv6_pridns_auto" != "-::0" ];then
+ ipv6_prefer_dns=$ipv6_pridns_auto
+ fi
+
+ if [ -n "$ipv6_secdns_auto" ] && [ "-$ipv6_secdns_auto" != "-::" ] && [ "-$ipv6_secdns_auto" != "-::0" ];then
+ ipv6_standby_dns=$ipv6_secdns_auto
+ fi
+
+ if [ "-$ipv6_prefer_dns" == "-" -a "-$ipv6_standby_dns" == "-" ]; then
+ return
+ else
+ if [ -n "$1" ] && [ "-$1" == "-dhcp6s" ] ;then
+ echo -e "\toption dns_servers $ipv6_prefer_dns $ipv6_standby_dns;" >> $dhcp6s_conf
+ elif [ -n "$1" ] && [ "-$1" == "-radvd" ] ;then
+ # del last line
+ sed -i '$d' $radvd_conf
+ echo -e "\tRDNSS $ipv6_prefer_dns $ipv6_standby_dns\n\t{" >> $radvd_conf
+ echo -e "\t\tAdvRDNSSPreference 15;" >> $radvd_conf
+ echo -e "\t\tAdvRDNSSOpen on;" >> $radvd_conf
+ echo -e "\t};\n};" >> $radvd_conf
+ fi
+
+ if [ "-$dnsconfig" == "-0" ]; then
+ echo "dnsconfig $1 $ipv6_prefer_dns, $ipv6_standby_dns" >> $test_log
+ if [ "-$ipv6_prefer_dns" != "-" ]; then
+ echo "nameserver $ipv6_prefer_dns" >> /etc/resolv.conf
+ fi
+ if [ "-$ipv6_standby_dns" != "-" ]; then
+ echo "nameserver $ipv6_standby_dns" >> /etc/resolv.conf
+ fi
+ dnsconfig=1
+ fi
+ fi
+}
+
+linkup_dhcpv6_set()
+{
+ dhcpv6_start=$pdp_ip
+ dhcpv6_end=$pdp_ip
+
+ #nv值非空则表示用户设置了静态ip、gw
+ gw=`nv get $ps_if"_ipv6_gw"`
+
+ echo -e "interface $br_if {" > $dhcp6s_conf
+ if [ "-$b_dhcpv6stateEnabled" = "-1" ];then
+ echo -e "\tserver-preference 255;\n\trenew-time 6000;" >> $dhcp6s_conf
+ echo -e "\trebind-time 9000;\n\tprefer-life-time 1300;" >> $dhcp6s_conf
+ echo -e "\tvalid-life-time 2000;\n\tallow rapid-commit;" >> $dhcp6s_conf
+ echo -e "\tlink $br_if {\n\t\tallow unicast;\n\t\tsend unicast;" >> $dhcp6s_conf
+ echo -e "\t\tpool {\n\t\t\trange $dhcpv6_start to $dhcpv6_end/$prefix_len;" >> $dhcp6s_conf
+ echo -e "\t\t};\n\t};" >> $dhcp6s_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf dhcp6s
+ echo -e "};" >> $dhcp6s_conf
+ dhcp6s -dDf -c $dhcp6s_conf $br_if &
+ else
+ #slaac with dhcp statelessset dns info
+ if [ "-$b_dhcpv6statelessEnabled" = "-1" ];then
+ echo -e "\tlink $br_if {\n\t};" >> $dhcp6s_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf dhcp6s
+ echo -e "};" >> $dhcp6s_conf
+ dhcp6s -dDf -c $dhcp6s_conf $br_if &
+ if [ $? -ne 0 ];then
+ echo "Error: dhcp6s -dDf -c $dhcp6s_conf $br_if failed." >> $test_log
+ fi
+ fi
+ fi
+}
+
+#获取ip并配置ps、eth
+linkup_get_addr()
+{
+ #disable the forwarding to send RS and not set the addr when receive ra packet
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 0 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+ echo 0 > /proc/sys/net/ipv6/conf/$eth_if/accept_ra
+ echo 0 > /proc/sys/net/ipv6/conf/$br_if/accept_ra
+ #call the slaac program to get the prefix addr
+ ifconfig $ps_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if up failed." >> $test_log
+ fi
+ prefix_info_temp=`nv get $ps_if"_ipv6_prefix_info"`
+ #如果当前没有前缀，则直接启动slaac，如果当前前缀已经设置，则说明已经获取到，直接配置IP地址即可
+ if [ -n "$prefix_info_temp" -a "-$prefix_info_temp" != "-::" ]; then
+ ret_code=0
+ else
+ sleep 1
+ interface_id_temp1=`nv get $ps_if"_ipv6_interface_id"`
+ local_ipv6_addr="fe80::"$interface_id_temp1
+ local_ipv6_addr_nv="$ps_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv=$local_ipv6_addr
+ ip -6 addr add $local_ipv6_addr/64 dev $ps_if 2>>$test_log
+ zte_ipv6_slaac -i "$ps_if"
+ ret_code=$?
+ fi
+ echo "Info: zte_ipv6_slaac return: $ret_code" >> $test_log
+ echo "the program zte_ipv6_slaac return = $ret_code"
+ if [ $ret_code -eq 0 ]; then
+ echo "the zte_ipv6_slaac success"
+ interface_id_temp=`nv get $ps_if"_ipv6_interface_id"`
+ prefix_info_temp=`nv get $ps_if"_ipv6_prefix_info"`
+ prefix_len=`nv get $ps_if"_ipv6_prefix_len"`
+ echo "##############1##########"
+ echo "$interface_id_temp"
+ echo "$prefix_info_temp $prefix_len"
+ echo "##############2##########"
+
+ #pdp 激活的ipv6地址
+ pdp_ip=$prefix_info_temp$interface_id_temp
+ #pdp激活地址，适配页面使用
+ nv set ipv6_wan_ipaddr="$pdp_ip"
+
+ ipv6_addr_conver $pdp_ip "$ps_if"
+
+ #给eth分配地址，使用ipv6_addr_conver在第15+1
+ br_ip=`nv get ipv6_br0_addr`
+ brctl addbr $br_if
+ brctl setfd $br_if 0.1
+ nv set $br_if"_ipv6_ip"=$br_ip
+ ifconfig $br_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br_if up failed." >> $test_log
+ fi
+ ip -6 addr add $br_ip/64 dev $br_if
+ #给外网口分配地址，使用ipv6_addr_conver在第15+2
+ ps_ip=`nv get $ps_if"_dhcpv6_start"`
+ nv set $ps_if"_ipv6_ip"=$ps_ip
+ #ifconfig $ps_if $ps_ip up
+ #if [ $? -ne 0 ];then
+ # echo "Error: ifconfig $ps_ip up failed." >> $test_log
+ #fi
+ ip -6 addr add $ps_ip/126 dev $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $ps_ip/126 dev $ps_if failed." >> $test_log
+ fi
+ nv set $ps_if"_ipv6_state"="working"
+
+ echo "Info: zte_ipv6_slaac pdp_ip: $pdp_ip" >> $test_log
+ echo "Info: zte_ipv6_slaac ps_ip: $ps_ip" >> $test_log
+ echo "Info: zte_ipv6_slaac br_ip: $br_ip" >> $test_log
+ else
+ echo "the zte_ipv6_slaac fail"
+ nv set $ps_if"_ipv6_state"="dead"
+ exit 1
+ fi
+}
+
+#路由规则，ps与eth级联
+linkup_route_set()
+{
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+
+ marknum=`expr $c_id + 60`
+ ip6tables -t mangle -A PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 160`
+ ip -6 route add default dev $br_if table $rt_num
+ ip -6 rule add to $pdp_ip/64 fwmark $marknum table $rt_num
+
+ marknum=`expr $c_id + 50`
+ ip6tables -t mangle -A PREROUTING -i $br_if -j MARK --set-mark $marknum
+ rt_num=`expr $c_id + 150`
+ ip -6 route add default dev $ps_if table $rt_num
+ ip -6 rule add from $pdp_ip/64 fwmark $marknum table $rt_num
+
+ ip6tables -t filter -A FORWARD -p icmpv6 --icmpv6-type 135 -j DROP
+
+ ip -6 route flush cache
+
+ #这句设完，里面可以ping通外网了
+ echo "Info: route_set ps_ip=$ps_ip" >> $test_log
+ #ip -6 route add default via $ps_ip dev $ps_if
+ ip -6 route add default dev $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route add default dev $ps_if failed." >> $test_log
+ fi
+
+ #enable ipv6 packet forwarding
+ echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 1 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+ echo 1 > /proc/sys/net/ipv6/conf/$eth_if/accept_ra
+ echo 1 > /proc/sys/net/ipv6/conf/$br_if/accept_ra
+ #enable ipv6 neigh discovery proxy
+ echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp
+
+ ndp_kill
+ zte_ndp -a -s $br_if -d $ps_if -l $ndp_log -p &
+}
+
+#############linkup radvd set############
+linkup_radvd_set()
+{
+ echo "enter linkup_radvd_set "
+
+ rm -rf $radvd_conf
+
+ if [ "-$b_dhcpv6stateEnabled" = "-1" ];then
+ echo -e "interface $br_if\n{\n\tAdvSendAdvert on;" > $radvd_conf
+ echo -e "\tAdvManagedFlag on;\n};" >> $radvd_conf
+ radvd_kill
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -p $radvd_pidfile&
+ echo "leave linkup_radvd_set "
+ return
+ fi
+
+ echo "Info: psext_updown_ipv6.sh br_if:$br_if, prefix_len:$prefix_len" >> $test_log
+ echo "ipv6_br0_addr_tmp:$ipv6_br0_addr_tmp"
+ echo "prefix_len:$prefix_len"
+
+ cp $path_ro/radvd_template.conf $radvd_conf
+
+ sed -i -e 's/#ipv6_wan_addr#\/64/#ipv6_wan_addr#\/#prefix_len#/g' $radvd_conf
+ sed -i -e s/br0/$br_if/g $radvd_conf
+ sed -i -e s/#ipv6_wan_addr#/$br_ip/g $radvd_conf
+ sed -i -e s/#prefix_len#/$prefix_len/g $radvd_conf
+ sed -i -e s/#adv_switch#/on/g $radvd_conf
+
+ # TODO: replace br0's ipv6 address
+ #sed -i -e s/#ipv6_wan_addr#/$wan_addr/g $radvd_conf
+ #sed -i -e s/#adv_switch#/on/g $radvd_conf
+
+ #slaac with dns info
+ if [ "-$b_dhcpv6statelessEnabled" = "-1" ];then
+ echo "use dhcpv6stateless for dns"
+ else
+ sed -i -e 's/AdvOtherConfigFlag on;/AdvOtherConfigFlag off;/g' $radvd_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf radvd
+ fi
+
+ radvd_kill
+ sleep 1
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -p $radvd_pidfile &
+
+ echo "leave linkup_radvd_set "
+}
+
+#构建网桥
+br_up()
+{
+ br="br"$c_id
+ brctl addbr $br 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl addbr $br failed." >> $test_log
+ fi
+ brctl setfd $br 0.1 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl setfd $br 0.1 failed." >> $test_log
+ fi
+ ifconfig $br up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br up failed." >> $test_log
+ fi
+
+ ifconfig $ps_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if up failed." >> $test_log
+ fi
+ brctl addif $br $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl addif $br $ps_if failed." >> $test_log
+ fi
+
+ brctl addif $br $eth_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl addif $br $eth_if failed." >> $test_log
+ fi
+ ifconfig $eth_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $eth_if up failed." >> $test_log
+ fi
+}
+
+#删除网桥
+br_down()
+{
+ br="br"$c_id
+ brctl delif $br $eth_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl delif $br $eth_if failed." >> $test_log
+ fi
+ ifconfig $eth_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $eth_if down failed." >> $test_log
+ fi
+ brctl delif $br $ps_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl delif $br $ps_if failed." >> $test_log
+ fi
+ ifconfig $ps_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+ ifconfig $br down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br down failed." >> $test_log
+ fi
+ brctl delbr $br 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: brctl delbr $br failed." >> $test_log
+ fi
+}
+
+#清除相应的radvd进程
+linkdown_radvd_set()
+{
+ #跟终端连接的网口直接会down，所以不用像ufi一样设置成1s有效期
+ radvd_kill
+}
+
+#清除相应的DHCPv6进程
+linkdown_dhcpv6_server_set()
+{
+ dhcp6s_kill
+}
+
+#删除相应的ipv6路由规则
+linkdown_route_set()
+{
+ br_ip=`nv get $br_if"_ipv6_ip"`
+ ps_ip=`nv get $ps_if"_ipv6_ip"`
+ pdp_ip=`nv get ipv6_wan_ipaddr`
+
+ ip6tables -t filter -D FORWARD -p icmpv6 --icmpv6-type 135 -j DROP
+
+ marknum=`expr $c_id + 50`
+ rt_num=`expr $c_id + 150`
+ ip -6 rule del from $pdp_ip/64 fwmark $marknum table $rt_num
+ ip6tables -t mangle -D PREROUTING -i $br_if -j MARK --set-mark $marknum
+ ip -6 route del default dev $ps_if table $rt_num
+
+ marknum=`expr $c_id + 60`
+ rt_num=`expr $c_id + 160`
+ ip -6 rule del to $pdp_ip/64 fwmark $marknum table $rt_num
+ ip6tables -t mangle -D PREROUTING -i $ps_if -j MARK --set-mark $marknum
+ ip -6 route del default dev $br_if table $rt_num
+
+ ip -6 addr del $br_ip/126 dev $br_if
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $eth_ip/126 dev $eth_if failed." >> $test_log
+ #fi
+ ip -6 addr del $ps_ip/126 dev $ps_if
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $ps_ip/126 dev $ps_if failed." >> $test_log
+ #fi
+ ip -6 route del default
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 route del default failed." >> $test_log
+ #fi
+
+ ifconfig $br_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $br_if down failed." >> $test_log
+ fi
+ ifconfig $ps_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $ps_if down failed." >> $test_log
+ fi
+
+ echo 0 > /proc/sys/net/ipv6/conf/$ps_if/accept_ra
+
+ #reset nv
+ nv set $br_if"_ipv6_ip"="::"
+ nv set $ps_if"_ipv6_ip"="::"
+ nv set $ps_if"_ipv6_pridns_auto"="::"
+ nv set $ps_if"_ipv6_secdns_auto"="::"
+ nv set $ps_if"_ipv6_gw"="::"
+ nv set $ps_if"_ipv6_interface_id"="::"
+ nv set $ps_if"_ipv6_prefix_info"="::"
+ nv set $ps_if"_dhcpv6_start"="::"
+ nv set $ps_if"_dhcpv6_end"="::"
+
+ #适配页面等其他地方使用老NV
+ nv set ipv6_wan_ipaddr="::"
+ nv set $ps_if"_ipv6_state"="dead"
+
+ local_ipv6_addr_nv="$ps_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv="::"
+
+ ndp_kill
+}
+
+if [ "$1" == "linkup" ]; then
+ mtu=`nv get mtu`
+ ifconfig $ps_if mtu $mtu
+ if [ "-$ps_ext_mode" == "-1" ]; then
+ linkup_get_addr
+ linkup_route_set
+ linkup_dhcpv6_set
+ linkup_radvd_set
+ brctl addif $br_if $eth_if
+ ifconfig $eth_if up
+ tc_tbf.sh up $c_id
+ elif [ "-$ps_ext_mode" == "-0" ]; then
+ br_up
+ fi
+elif [ "$1" == "linkdown" ]; then
+ if [ "-$ps_ext_mode" == "-1" ]; then
+ tc_tbf.sh down $c_id
+ linkdown_radvd_set
+ linkdown_dhcpv6_server_set
+ linkdown_route_set
+ slaac_kill
+ brctl delif $br_if $eth_if
+ ifconfig $eth_if down
+ echo "" > /etc/resolv.conf
+ elif [ "-$ps_ext_mode" == "-0" ]; then
+ br_down
+ fi
+fi
+
+echo "Info: psext_updown_ipv6.sh leave" >> $test_log
diff --git a/ap/app/Script/scripts/start_telnetd.sh b/ap/app/Script/scripts/start_telnetd.sh
new file mode 100644
index 0000000..9ed0fc3
--- /dev/null
+++ b/ap/app/Script/scripts/start_telnetd.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+flag=`nv get telnetd_enable`
+
+if [ "$flag" == "y" ]; then
+ echo "Starting telnetd......!"
+ /usr/sbin/telnetd -p 4719 &
+fi
+
+
diff --git a/ap/app/Script/scripts/start_update_app.sh b/ap/app/Script/scripts/start_update_app.sh
new file mode 100644
index 0000000..aec2890
--- /dev/null
+++ b/ap/app/Script/scripts/start_update_app.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# $Id: lan.sh
+#
+
+update_type=`nv get update_type`
+fota_dm_vendor=`nv get fota_dm_vendor`
+if [ "$update_type" == "mifi_local" ]; then
+ echo "update_type: mifi_local"
+fi
+
+if [ "$update_type" == "mifi_fota" ]; then
+ echo "update_type: mifi_fota"
+ if [ "$fota_dm_vendor" == "zx" ]; then
+ fota_dm_zx &
+ else
+ fota_dm_gs &
+ fi
+fi
+
+if [ "$update_type" == "mdl_local" ]; then
+ echo "update_type: mdl_local"
+ localUpdate &
+fi
+
+if [ "$update_type" == "mdl_fota" ]; then
+ echo "update_type: mdl_fota"
+ if [ "$fota_dm_vendor" == "zx" ]; then
+ fota_dm_zx &
+ else
+ fota_dm_gs &
+ fi
+fi
+
+if [ "$update_type" == "none" ]; then
+ echo "update_type: none"
+fi
\ No newline at end of file
diff --git a/ap/app/Script/scripts/tc_tbf.sh b/ap/app/Script/scripts/tc_tbf.sh
new file mode 100644
index 0000000..a893cba
--- /dev/null
+++ b/ap/app/Script/scripts/tc_tbf.sh
@@ -0,0 +1,126 @@
+#!/bin/sh
+# ===========================================================
+# usage: tc_control.sh
+# traffic control by tc_uplink and tc_downlink
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: tc_tbf $1 $2 start "
+echo "Info: tc_tbf $1 $2 start" >> $test_log
+
+#Á÷¿ØÉÏÏÂÐз§Öµ£¬Îª¿Õ»òΪ0±íʾ²»½øÐÐÁ÷¿Ø£¬ÔÝʱֻʵÏÖÉÏÐеÄtc£¬ÏÂÐн«À´¸ù¾Ýʵ¼ÊÐèÒªÔÙÀ©Õ¹ÊµÏÖ
+UPLINK=`nv get tc_uplink`
+DOWNLINK=`nv get tc_downlink`
+def_cid=`nv get default_cid`
+tc_enable=`nv get tc_enable`
+
+#tc_enable=0£¬Á÷Á¿¿ØÖƹ¦Äܹرգ¬Ö±½ÓÍ˳ö
+if [ "$tc_enable" == "0" ]; then
+ echo "tc_enable=0"
+ echo "tc_enable=0" >> $test_log
+ exit 0
+fi
+
+#ÉÏÏÂÐеijö¿ÚdevÐèÒª¸ù¾Ýʵ¼ÊÇé¿öÑ¡Ôñ
+need_jilian=`nv get need_jilian`
+lanEnable=`nv get LanEnable`
+if [ "$need_jilian" == "1" ]; then
+ if [ "$lanEnable" == "1" ]; then
+ IN=`nv get lan_name`
+ elif [ "$lanEnable" == "0" ]; then
+ IN=`nv get "ps_ext"$def_cid`
+ fi
+elif [ "$need_jilian" == "0" ]; then
+ IN=`nv get lan_name`
+fi
+
+#˫ջʱ£¬ipv4ºÍipv6µÄĬÈÏÍâÍø¿Ú¿ÉÄܲ»Ò»Ö£¬ËäÈ»¶ÌÆÚÄÚ¶¼²»»áÓÐʵ¼Ê³¡¾°
+OUT4=$defwan_rel
+OUT6=$defwan6_rel
+
+if [ "$lanEnable" == "1" ]; then
+ GATEWAY=`nv get lan_ipaddr`
+fi
+
+echo "IN=$IN, OUT4=$OUT4, OUT6=$OUT6, GATEWAY=$GATEWAY, DOWNLINK=$DOWNLINK, UPLINK=$UPLINK"
+echo "IN=$IN, OUT4=$OUT4, OUT6=$OUT6, GATEWAY=$GATEWAY, DOWNLINK=$DOWNLINK, UPLINK=$UPLINK" >> $test_log
+
+#Çå¿ÕÔÏȵÄÁ÷³Ì¹æÔò
+tc qdisc del dev $IN root
+if [ "$OUT4" != "" ]; then
+ tc qdisc del dev $OUT4 root
+fi
+if [ "$OUT6" != "" -a "$OUT6" != "$OUT4" ]; then
+ echo "clear tc for $OUT6"
+ tc qdisc del dev $OUT6 root
+fi
+
+#¸øÄں˻ָ´¿ìËÙת·¢¼¶±ð
+fastnat_level=`nv get fastnat_level`
+echo "Info: fastnat_level restore to£º$fastnat_level" >> $test_log
+echo $fastnat_level > /proc/net/fastnat_level
+
+ifconfig $IN txqueuelen 10
+if [ "$OUT4" != "" ]; then
+ ifconfig $OUT4 txqueuelen 10
+fi
+if [ "$OUT6" != "" -a "$OUT6" != "$OUT4" ]; then
+ ifconfig $OUT6 txqueuelen 10
+fi
+
+#ÊÊÅä֮ǰµÄ¿Í»§£ºÈç¹û$1²»µÈÓÚdown/DOWN£¬¾Í°´up/UP´¦Àí
+if [ "$1" == "down" -o "$1" == "DOWN" ]; then
+ echo "traffic control down"
+ echo "traffic control down" >> $test_log
+ exit 0
+fi
+
+if [ "$DOWNLINK" == "" -o "$DOWNLINK" == "0" ] && [ "$UPLINK" == "" -o "$UPLINK" == "0" ]; then
+ echo "no need to traffic control"
+ echo "no need to traffic control" >> $test_log
+ exit 0
+fi
+
+#Ôݶ¨uc/v2¶¼ÐèÒª¹Ø±Õ¿ìËÙת·¢
+
+echo 0 > /proc/net/fastnat_level
+
+if [ "$DOWNLINK" != "0" -a "$DOWNLINK" != "" ]; then
+ echo "traffic control for down"
+ echo "traffic control for down" >> $test_log
+
+ LOCAL=`nv get tc_local`
+ SUM=`expr ${DOWNLINK} + ${LOCAL}`
+ echo "LOCAL=$LOCAL, SUM=$SUM"
+ echo "LOCAL=$LOCAL, SUM=$SUM" >> $test_log
+
+ ifconfig $IN txqueuelen 1000
+
+ #ÏÞËٵĴóСµ¥Î»ËäÈ»ÊÇbps£¬µ«Êµ¼ÊÊÇ×Ö½Ú
+ tc qdisc add dev $IN root handle 1: htb default 20
+ tc class add dev $IN parent 1: classid 1:1 htb rate ${SUM}bps
+ tc class add dev $IN parent 1:1 classid 1:20 htb rate ${DOWNLINK}bps
+ tc class add dev $IN parent 1:1 classid 1:10 htb rate ${LOCAL}bps
+ tc qdisc add dev $IN parent 1:10 handle 10: sfq perturb 10
+ tc qdisc add dev $IN parent 1:20 handle 20: sfq perturb 10
+ tc filter add dev $IN protocol ip parent 1:0 prio 1 u32 match ip src ${GATEWAY}/32 match ip sport 80 0xffff flowid 1:10
+fi
+
+if [ "$UPLINK" != "0" -a "$UPLINK" != "" ]; then
+ if [ "$OUT4" != "" ]; then
+ echo "traffic control for up - ipv4"
+ echo "traffic control for up - ipv4" >> $test_log
+ ifconfig $OUT4 txqueuelen 1000
+ tc qdisc add dev $OUT4 root handle 1: htb default 1
+ tc class add dev $OUT4 parent 1: classid 1:1 htb rate ${UPLINK}bps
+ fi
+
+ if [ "$OUT6" != "" -a "$OUT6" != "$OUT4" ]; then
+ echo "traffic control for up - ipv6"
+ echo "traffic control for up - ipv6" >> $test_log
+ ifconfig $OUT6 txqueuelen 1000
+ tc qdisc add dev $OUT6 root handle 1: htb default 1
+ tc class add dev $OUT6 parent 1: classid 1:1 htb rate ${UPLINK}bps
+ fi
+fi
\ No newline at end of file
diff --git a/ap/app/Script/scripts/to_mnt_ubifs.sh b/ap/app/Script/scripts/to_mnt_ubifs.sh
new file mode 100644
index 0000000..abaa4a9
--- /dev/null
+++ b/ap/app/Script/scripts/to_mnt_ubifs.sh
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+#Author: comlee
+#
+
+#外部传参
+# 参数1: mount点
+# 参数2: 分区名
+RECVFS_MTD_NUM=`cat /proc/mtd | grep "$2\"" | awk '{print $1}'| cut -b 4- |sed 's/://g'`
+ubiattach /dev/ubi_ctrl -m ${RECVFS_MTD_NUM}
+echo "attach $2 $1"
+
+if [ $? != 0 ];then
+ echo "fail to attach $2"
+ exit 1
+fi
+
+UBIDEV_NUM=`ls /sys/devices/virtual/ubi|wc -l`
+MYTMP=0
+
+if [ ! -e $1 ]; then
+ mkdir -p $1
+fi
+
+while :
+do
+ if [ -e /sys/devices/virtual/ubi/ubi${MYTMP} ]; then
+ TMPDEV=`cat /sys/devices/virtual/ubi/ubi${MYTMP}/mtd_num`
+ if [ $TMPDEV -eq ${RECVFS_MTD_NUM} ]; then
+# umount $1
+ mount -t ubifs -o rw,sync,noatime ubi${MYTMP}_0 $1
+ exit 0
+ fi
+ else
+ if [ ${MYTMP} -ge ${UBIDEV_NUM} ]; then
+ exit 1
+ fi
+ fi
+ MYTMP=`expr $MYTMP + 1`
+done
+
+
diff --git a/ap/app/Script/scripts/udhcpc.sh b/ap/app/Script/scripts/udhcpc.sh
new file mode 100644
index 0000000..1cdeae0
--- /dev/null
+++ b/ap/app/Script/scripts/udhcpc.sh
@@ -0,0 +1,155 @@
+#!/bin/sh
+# udhcpc script edited by Tim Riker <Tim@Rikers.org>
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: udhcpc.sh $1 $2 start" >> $test_log
+
+[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
+
+RESOLV_CONF=$path_conf"/resolv.conf"
+#broadcast´æÔÚʱºò£¬ÉèÖÃBROADCAST
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+#subnet´æÔÚʱºò£¬ÉèÖÃNETMASK
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+
+deconfig_wan()
+{
+ nv set $1"_ip"=0.0.0.0
+ nv set $1"_nm"=0.0.0.0
+ nv set $1"_gw"=0.0.0.0
+ nv set $1"_pridns"=0.0.0.0
+ nv set $1"_secdns"=0.0.0.0
+}
+
+get_wan_name()
+{
+ c_id="0"
+ ps_name=`nv get pswan`
+ rj45_name=`nv get ethwan`
+ wifi_name=`nv get wifiwan`
+ case "$1" in
+ $ps_name"1")
+ wanname="pswan"
+ c_id="1" ;;
+ $ps_name"2")
+ wanname="pswan"
+ c_id="2" ;;
+ $ps_name"3")
+ wanname="pswan"
+ c_id="3" ;;
+ $ps_name"4")
+ wanname="pswan"
+ c_id="4" ;;
+ $rj45_name)
+ wanname="ethwan" ;;
+ $wifi_name)
+ wanname="wifiwan" ;;
+ esac
+}
+
+
+case "$1" in
+ deconfig)
+ echo "case deconfig "
+ ifconfig $interface 0.0.0.0 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $interface 0.0.0.0 failed." >> $test_log
+ fi
+ deconfig_wan $interface 2>>$test_log
+ (router_msg_proxy ipv4 udhcpc.sh >> $test_log 2>&1 || echo "Error: router_msg_proxy ipv4 udhcpc.sh failed." >> $test_log) &
+ echo "case deconfig over"
+
+ step=`nvram_get 2860 step_tmp`
+ if [ "-$step" = "-" ];then
+ step=0
+ fi
+
+ echo "step=$step"
+
+ step=`expr $step + 1`
+ nv set step_tmp=$step
+
+ if [ "-$step" = "-3" ];then
+ nv set step_tmp=0
+ fi
+
+ ;;
+
+ renew|bound)
+ echo "case renew bound"
+
+ get_wan_name $interface
+ if [ "-$wanname" == "-ethwan" -o "-$wanname" == "-wifiwan" ]; then
+ (router_msg_proxy del_timer $wanname >> $test_log 2>&1 || echo "Error: router_msg_proxy del_timer failed." >> $test_log) &
+ fi
+
+ #µ÷Óøýű¾Æðudhcpʱºò£¬ÅжÏinterfaceÊÇ·ñºÍethwanÆ¥Å䣬ƥÅäÔòÆðethwan,·ñÔòÓÃÔinterface
+ ethwan_tmp=`nv get ethwan`
+ sw0_flag=`echo $ethwan_tmp | grep $interface`
+ if [ "-${sw0_flag}" != "-" ];then
+ interface=${ethwan_tmp}
+ fi
+ ifconfig $interface $ip $BROADCAST $NETMASK 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $interface $ip $BROADCAST $NETMASK failed." >> $test_log
+ fi
+ if [ "-$wanname" == "-wifiwan" ]; then
+ nv set wifi_state="working"
+ elif [ "-$wanname" == "-ethwan" ]; then
+ #×ÔÊÊÓ¦£¬dhcp»ñÈ¡ip³É¹¦ÔòɱËÀpppoe½ø³Ì
+ pppoe_pid=`ps | grep -v grep | grep $interface | grep pppoecd | awk '{print $1}'`
+ kill $pppoe_pid
+ nv set rj45_state="working"
+ nv set eth_curmode="dhcp"
+ fi
+
+ echo "interface:$interface, ip:$ip, NETMASK:$subnet"
+ echo "router:$router"
+ echo "dns:$dns"
+
+ #set new value to ip, netmask, gateway and dns in nv
+ nv set $interface"_ip"=$ip
+ nv set $interface"_nm"=$subnet
+ nv set $interface"_gw"=$router
+ #set dns to nv
+ for i in $dns ; do
+ [ -n "$pspridns" ] || { nv set $interface"_pridns"=$i; pspridns="pspridns"; }
+ nv set $interface"_secdns"=$i
+ done
+
+ #c_id=0ÔòÊÇrj45»òWiFi£¬c_id=defaultÔòΪÓÃÓÚÍâÍøµÄps¿Ú
+ def_cid=`nv get default_cid`
+ if [ "-$c_id" == "-0" -o "-$c_id" == "-$def_cid" ]; then
+ (router_msg_proxy ipv4 udhcpc.sh >> $test_log 2>&1 || echo "Error: router_msg_proxy ipv4 udhcpc.sh failed." >> $test_log) &
+ else
+ #policy router
+ wan_pri=`nv get $wanname"_priority"`
+ rt_num=`expr $wan_pri \* 10 + $c_id`
+ ip rule add from $ip table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip rule add from $ip table $rt_num failed." >> $test_log
+ fi
+ ip route add default via $router table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route add default via $router table $rt_num failed." >> $test_log
+ fi
+ ip route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route flush cache failed." >> $test_log
+ fi
+ fi
+
+ # notify goahead when the WAN IP has been acquired. --yy
+ echo "case renew bound over"
+
+ #nv set ppp_status=ppp_connected
+ nv set step_tmp=0
+ ;;
+esac
+
+
+
+exit 0
+
diff --git a/ap/app/Script/scripts/upnp.sh b/ap/app/Script/scripts/upnp.sh
new file mode 100644
index 0000000..732e0a6
--- /dev/null
+++ b/ap/app/Script/scripts/upnp.sh
@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# $Id: upnp.sh,v 1.22.6.1 2008-10-02 12:57:42 winfred Exp $
+#
+# usage: upnp.sh
+#
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: upnp.sh start " >> $test_log
+
+
+# stop all
+killall -9 miniupnpd
+sh $path_sh/upnp_ipt_remove.sh
+
+# upnp
+upnp=`nv get upnpEnabled`
+if [ "$upnp" = "1" ]; then
+ if [ -f $path_conf/pidfile/miniupnp.pid ]
+ then
+ rm -f $path_conf/pidfile/miniupnpd.pid
+ fi
+
+ if [ -f /var/run/miniupnpd.pid ]
+ then
+ rm -f /var/run/miniupnpd.pid
+ fi
+
+ if [ -f $path_conf/miniupnpd.conf ]
+ then
+ echo "$path_conf/miniupnpd.conf already exist!"
+ rm $path_conf/miniupnpd.conf
+ fi
+
+ cp $path_ro/miniupnpd_temp.conf $path_conf/miniupnpd.conf
+
+ gw=`nv get lan_ipaddr`
+ . $path_sh/upnp_set_listenip.sh $gw/16
+
+ route del -net 239.0.0.0 netmask 255.0.0.0 dev $lan_if
+ route add -net 239.0.0.0 netmask 255.0.0.0 dev $lan_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: route add -net 239.0.0.0 netmask 255.0.0.0 dev $lan_if failed." >> $test_log
+ fi
+ . $path_sh/upnp_ipt_init.sh
+ miniupnpd -f $path_conf/miniupnpd.conf &
+fi
diff --git a/ap/app/Script/scripts/upnp_ipt_init.sh b/ap/app/Script/scripts/upnp_ipt_init.sh
new file mode 100644
index 0000000..e942b8c
--- /dev/null
+++ b/ap/app/Script/scripts/upnp_ipt_init.sh
@@ -0,0 +1,22 @@
+#! /bin/sh
+# $Id: iptables_init.sh,v 1.1 2008-09-15 12:28:53 winfred Exp $
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: upnp_ipt_init.sh start" >> $test_log
+IPTABLES=iptables
+
+#change this parameters :
+EXTIF=$defwan_rel
+
+#adding the MINIUPNPD chain for nat
+$IPTABLES -t nat -N MINIUPNPD
+#adding the rule to MINIUPNPD
+#$IPTABLES -t nat -A PREROUTING -d $EXTIP -i $EXTIF -j MINIUPNPD
+$IPTABLES -t nat -I PREROUTING -i $EXTIF -j MINIUPNPD
+
+#adding the MINIUPNPD chain for filter
+$IPTABLES -t filter -N MINIUPNPD
+#adding the rule to MINIUPNPD
+$IPTABLES -t filter -I FORWARD -i $EXTIF -o ! $EXTIF -j MINIUPNPD
diff --git a/ap/app/Script/scripts/upnp_ipt_remove.sh b/ap/app/Script/scripts/upnp_ipt_remove.sh
new file mode 100644
index 0000000..4cbcb1d
--- /dev/null
+++ b/ap/app/Script/scripts/upnp_ipt_remove.sh
@@ -0,0 +1,25 @@
+#! /bin/sh
+# $Id: iptables_removeall.sh,v 1.1 2008-09-15 12:28:53 winfred Exp $
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: upnp_ipt_remove.sh start" >> $test_log
+
+IPTABLES=iptables
+
+#change this parameters :
+EXTIF="$defwan_rel"
+
+#removing the MINIUPNPD chain for nat
+$IPTABLES -t nat -F MINIUPNPD
+#removing the rule to MINIUPNPD
+#$IPTABLES -t nat -D PREROUTING -d $EXTIP -i $EXTIF -j MINIUPNPD
+$IPTABLES -t nat -D PREROUTING -i $EXTIF -j MINIUPNPD
+$IPTABLES -t nat -X MINIUPNPD
+
+#removing the MINIUPNPD chain for filter
+$IPTABLES -t filter -F MINIUPNPD
+#adding the rule to MINIUPNPD
+$IPTABLES -t filter -D FORWARD -i $EXTIF -o ! $EXTIF -j MINIUPNPD
+$IPTABLES -t filter -X MINIUPNPD
diff --git a/ap/app/Script/scripts/upnp_set_listenip.sh b/ap/app/Script/scripts/upnp_set_listenip.sh
new file mode 100644
index 0000000..dcfbc4f
--- /dev/null
+++ b/ap/app/Script/scripts/upnp_set_listenip.sh
@@ -0,0 +1,21 @@
+#! /bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "Info: upnp_set_listenip.sh start" >> $test_log
+
+if [ -f $path_conf/miniupnpd.conf ]
+ then
+ echo "$path_conf/miniupnpd.conf already exist!"
+fi
+
+conf_file=$path_conf/miniupnpd.conf
+
+listening_ip=$(grep listening_ip= $conf_file)
+aim="listening_ip=$1"
+sed -i "s:$listening_ip:$aim:g" $conf_file
+ip=`nv get lan_ipaddr`
+sed -i -e "s/#allow_ip#/$ip/g" $conf_file
+name=`nv get device_name`
+sed -i -e "s/#device_name#/$name/g" $conf_file
diff --git a/ap/app/Script/scripts/user-config-udhcpd.sh b/ap/app/Script/scripts/user-config-udhcpd.sh
new file mode 100644
index 0000000..62eefd7
--- /dev/null
+++ b/ap/app/Script/scripts/user-config-udhcpd.sh
@@ -0,0 +1,66 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+echo "Info: user-config-udhcpd.sh start" >> $test_log
+
+lan_enable=`nv get LanEnable`
+if [ "-$lan_enable" == "-0" ]; then
+ exit 0
+fi
+
+static_ip_init()
+{
+ mac_ip_list=`nv get mac_ip_list`
+ num_any=`echo $mac_ip_list| grep -c ";"`
+ num_one=`echo $mac_ip_list| grep -c "+"`
+
+ if [ "$num_any" -eq "0" ]; then
+ if [ "$num_one" -eq "1" ]; then
+ mac=`echo $mac_ip_list| awk -F '+' '{print $2}'`
+ ip=`echo $mac_ip_list| awk -F '+' '{print $3}'`
+ sh $path_sh/config-udhcpd.sh "lan" -S $mac $ip
+ else
+ echo "the mac_ip_list is null"
+
+ fi
+ else
+ var=`echo $mac_ip_list | sed "s/;/ /g"`
+ for list in $var
+ do
+ mac=`echo $list| awk -F '+' '{print $2}'`
+ ip=`echo $list| awk -F '+' '{print $3}'`
+ sh $path_sh/config-udhcpd.sh "lan" -S $mac $ip
+ done
+
+ fi
+}
+
+start=`nv get dhcpStart`
+end=`nv get dhcpEnd`
+dns=`nv get dhcpDns`
+mask=`nv get lan_netmask`
+gw=`nv get lan_ipaddr`
+lease=`nv get dhcpLease_hour`
+lease=`expr $lease \* 3600`
+pidfile=$path_conf"/udhcpd.pid"
+leasesfile=$path_conf"/udhcpd.leases"
+
+sh $path_sh/config-udhcpd.sh "lan" -s $start
+sh $path_sh/config-udhcpd.sh "lan" -e $end
+sh $path_sh/config-udhcpd.sh "lan" -i $lan_if
+sh $path_sh/config-udhcpd.sh "lan" -m $mask
+sh $path_sh/config-udhcpd.sh "lan" -d $dns
+echo "Info: config-udhcpd.sh lan -d $dns" >> $test_log
+if [ "-$gw" != "-" ]; then
+ sh $path_sh/config-udhcpd.sh "lan" -g $gw
+ echo "Info: config-udhcpd.sh lan -g $gw" >> $test_log
+fi
+if [ "-$lease" != "-" ]; then
+ sh $path_sh/config-udhcpd.sh "lan" -t $lease
+fi
+
+static_ip_init
+
+sh $path_sh/config-udhcpd.sh "lan" -p $pidfile
+sh $path_sh/config-udhcpd.sh "lan" -l $leasesfile
\ No newline at end of file
diff --git a/ap/app/Script/scripts/wan_ipv4.sh b/ap/app/Script/scripts/wan_ipv4.sh
new file mode 100755
index 0000000..209ed18
--- /dev/null
+++ b/ap/app/Script/scripts/wan_ipv4.sh
@@ -0,0 +1,292 @@
+#!/bin/sh
+#usg: wan_ipv4 linkup pswan
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+#Èë²ÎÖÐÓÐc_idÔòÉèÖã¬Ã»ÓÐÔòÖÃÁ㣬ÓÃÓÚÉèÖòßÂÔ·ÓɱíºÅ
+if [ "-$3" == "-" ]; then
+ c_id="0"
+else
+ c_id=$3
+fi
+def_cid=`nv get default_cid`
+
+#»ñÈ¡ÍøÂçÉ豸Ãû
+get_wan_if()
+{
+ case $1 in
+ "pswan")
+ wan_if="$pswan_name"$2 ;;
+ "ethwan")
+ wan_if=$ethwan_if ;;
+ "wifiwan")
+ wan_if=$wifiwan_if ;;
+ esac
+
+ mtu=`nv get mtu`
+ ifconfig $wan_if mtu $mtu
+}
+#ÉèÖù¤×÷״̬ ÕýÔÚÁ¬½Ó£ºconnect ÒÑÁ¬½Ó£ºworking ÒѶϿª£ºdead
+state_set()
+{
+ if [ "-$wan_name" == "-wifiwan" ]; then
+ nv set wifi_state="working"
+ elif [ "-$wan_name" == "-ethwan" ]; then
+ nv set rj45_state="working"
+ fi
+}
+#¸ù¾ÝÍø¿ÚÊÇ·ñÓÃÓÚÆÕͨÉÏÍâÍø£¬È·¶¨ÊÇ·ñÐèÒª·¢ÏûÏ¢¸øzte_router
+msg_zte_router()
+{
+ if [ "-$c_id" == "-0" -o "-$c_id" == "-$def_cid" ]; then
+ (router_msg_proxy ipv4 wan_ipv4.sh >> $test_log 2>&1 || echo "Error: router_msg_proxy ipv4 wan_ipv4.sh failed." >> $test_log) &
+ fi
+}
+
+linkup()
+{
+ #$1 :pswan / usbwan / ethwan / wifiwan
+ wan_name=$1
+ wan_mode=`nv get $wan_name"_mode"`
+
+ #»ñÈ¡wan_if±äÁ¿
+ get_wan_if $1 $2
+
+ if [ "-$wan_mode" == "-static" ]; then
+ wan_ip=`nv get "static_"$wan_name"_ip"`
+ wan_gw=`nv get "static_"$wan_name"_gw"`
+ wan_pridns=`nv get "static_"$wan_name"_pridns"`
+ wan_secdns=`nv get "static_"$wan_name"_secdns"`
+ wan_nm=`nv get "static_"$wan_name"_nm"`
+ if [ "-$wan_name" != "-wifiwan" ]; then
+ ifconfig $wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if down failed." >> $test_log
+ fi
+ ifconfig $wan_if $wan_ip up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if $wan_ip up failed." >> $test_log
+ fi
+ fi
+ if [ "-$wan_name" == "-ethwan" ]; then
+ nv set eth_curmode="static"
+ #rj45¾²Ì¬Á¬½Ó£¬¹Ø±Õ³¬Ê±¼ÆʱÆ÷
+ (router_msg_proxy del_timer ethwan >> $test_log 2>&1 || echo "Error: router_msg_proxy del_timer failed." >> $test_log) &
+ fi
+
+ #ÉèÖÃÍøÂçÉ豸״̬±ê־Ϊworking
+ state_set
+ #set ip¡¢gw¡¢dns to nv
+ nv set $wan_if"_ip"=$wan_ip
+ nv set $wan_if"_gw"=$wan_gw
+ nv set $wan_if"_pridns"=$wan_pridns
+ nv set $wan_if"_secdns"=$wan_secdns
+
+ wan_pri=`nv get $1"_priority"`
+ rt_num=`expr $wan_pri \* 10 + $c_id`
+ ip rule add from $wan_ip table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip rule add from $wan_ip table $rt_num failed." >> $test_log
+ fi
+ ip route add default via $wan_gw table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route add default via $wan_gw table $rt_num failed." >> $test_log
+ fi
+ ip route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route flush cache failed." >> $test_log
+ fi
+
+ #in this proxy ,we send msg to zte_mainctrl
+ msg_zte_router
+
+ # pswan PDP
+ elif [ "-$wan_mode" == "-pdp" ]; then
+ pswan_ip=`nv get $wan_if"_ip"`
+ pswan_gw=`nv get $wan_if"_gw"`
+ pswan_pridns=`nv get $wan_if"_pridns"`
+ pswan_secdns=`nv get $wan_if"_secdns"`
+ pswan_nm=`nv get $wan_if"_nm"`
+
+ #ifconfig $wan_if down 2>>$test_log
+ ifconfig $wan_if $pswan_ip netmask 255.255.255.0 up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if $pswan_ip up failed." >> $test_log
+ fi
+
+ pswan_pri=`nv get pswan_priority`
+ rt_num=`expr $pswan_pri \* 10 + $c_id`
+ ip rule add from $pswan_ip table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip rule add from $pswan_ip table $rt_num failed." >> $test_log
+ fi
+ ip route add default via $pswan_gw table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route add default via $pswan_gw table $rt_num failed." >> $test_log
+ fi
+ ip route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip route flush cache failed." >> $test_log
+ fi
+
+ msg_zte_router
+
+ elif [ "-$wan_mode" == "-auto" ]; then
+ pppoe_user=`nv get pppoe_username`
+ pppoe_pass=`nv get pppoe_cc`
+ udhcpc_kill
+ pppoe_kill
+
+ if [ "-$wan_name" == "-ethwan" ]; then
+ nv set eth_curmode=""
+ fi
+ if [ "-$wan_name" != "-wifiwan" ]; then
+ ifconfig $wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if down failed." >> $test_log
+ fi
+ ifconfig $wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if up failed." >> $test_log
+ fi
+ fi
+
+ if [ "-${pppoe_user}" = "-" -a "-${pppoe_pass}" = "-" ];then
+ echo "auto wan_mode: pppoe_user is ${pppoe_user}, pppoe_pass is ${pppoe_pass}, so start dhcp client. " >> $test_log
+ udhcpc -i $wan_if -s $path_sh/udhcpc.sh &
+ else
+ sh $path_sh/pppoe_dail.sh connect
+ fi
+
+ elif [ "-$wan_mode" == "-dhcp" ]; then
+ udhcpc_kill
+ pppoe_kill
+
+ if [ "-$wan_name" == "-pswan" ]; then
+ ifconfig $wan_if arp 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if arp failed." >> $test_log
+ fi
+ fi
+
+ if [ "-$wan_name" == "-ethwan" ]; then
+ nv set eth_curmode="dhcp"
+ fi
+
+ if [ "-$wan_name" != "-wifiwan" ]; then
+ ifconfig $wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if down failed." >> $test_log
+ fi
+ ifconfig $wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if up failed." >> $test_log
+ fi
+ fi
+ udhcpc -i $wan_if -s $path_sh/udhcpc.sh &
+
+ elif [ "-$wan_mode" == "-pppoe" ]; then
+ udhcpc_kill
+ pppoe_kill
+
+ if [ "-$wan_name" == "-ethwan" ]; then
+ nv set eth_curmode="pppoe"
+ fi
+
+ if [ "-$wan_name" != "-wifiwan" ]; then
+ ifconfig $wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if down failed." >> $test_log
+ fi
+ ifconfig $wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if up failed." >> $test_log
+ fi
+ fi
+ sh $path_sh/pppoe_dail.sh connect
+ fi
+
+}
+
+del_default_wan()
+{
+ default_wan_name=`nv get default_wan_name`
+ if [ "$1" == "$default_wan_name" ]; then
+ nv set default_wan_name=""
+ nv set default_wan_rel=""
+ fi
+}
+
+linkdown()
+{
+ wan_name=$1
+ get_wan_if $1 $2
+
+ udhcpc_kill
+ pppoe_kill
+
+ #if [ "-$c_id" == "-0" -o "-$c_id" == "-$def_cid" ]; then
+ #echo 0 > /proc/sys/net/ipv4/ip_forward
+ #fi
+
+ ifconfig $wan_if 0.0.0.0 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if 0.0.0.0 failed." >> $test_log
+ fi
+ if [ "$wan_name" == "wifiwan" ]; then
+ echo $wan_if > /proc/net/dev_down
+ else
+ ifconfig $wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if down failed." >> $test_log
+ fi
+ fi
+ wan_ip=`nv get $wan_if"_ip"`
+ wan_gw=`nv get $wan_if"_gw"`
+
+ route del default gw $wan_gw dev $wan_if
+ #if [ $? -ne 0 ];then
+ # echo "Error: route del default gw $wan_gw dev $wan_if failed." >> $test_log
+ #fi
+
+ #del policy router
+ wan_pri=`nv get $1"_priority"`
+ rt_num=`expr $wan_pri \* 10 + $c_id`
+ ip rule del from $wan_ip table $rt_num
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip rule del from $wan_ip table $rt_num failed." >> $test_log
+ #fi
+ ip route del default via $wan_gw table $rt_num
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip route del default via $wan_gw table $rt_num failed." >> $test_log
+ #fi
+
+ #wan_ipaddÐèÒªÊÊÅä
+ if [ "$wan_if" == "$defwan_if" ]; then
+ nv set wan_ipaddr=""
+ fi
+ nv set $wan_if"_ip"=0.0.0.0
+ nv set $wan_if"_nm"=0.0.0.0
+ nv set $wan_if"_gw"=0.0.0.0
+ nv set $wan_if"_pridns"=0.0.0.0
+ nv set $wan_if"_secdns"=0.0.0.0
+ pdp_type=`nv get "pdp_act_type"$def_cid`
+ if [ "$2" == "$def_cid" -a "-$pdp_type" != "-IPv4v6" ]; then
+ nv set default_cid=""
+ fi
+ del_default_wan $wan_if
+ msg_zte_router
+
+}
+
+echo "Info: wan_ipv4.sh $1 $2 $3 start" >> $test_log
+if [ "$1" == "linkup" ]; then
+ linkup $2 $3
+
+elif [ "$1" == "linkdown" ]; then
+ if [ "-$2" == "-pswan" ]; then
+ tc_tbf.sh down $def_cid
+ fi
+ linkdown $2 $3
+fi
\ No newline at end of file
diff --git a/ap/app/Script/scripts/wan_ipv6.sh b/ap/app/Script/scripts/wan_ipv6.sh
new file mode 100755
index 0000000..1e45966
--- /dev/null
+++ b/ap/app/Script/scripts/wan_ipv6.sh
@@ -0,0 +1,419 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+
+echo "input param is $1 $2 $3"
+echo "Info: wan_ipv6 $1 $2 $3 start" >> $test_log
+
+#Èë²ÎÖÐÓÐc_idÔòÉèÖã¬Ã»ÓÐÔòÖÃÁ㣬ÓÃÓÚÉèÖòßÂÔ·ÓɱíºÅ
+if [ "$3" == "" ]; then
+ c_id="0"
+else
+ c_id=$3
+fi
+def_cid=`nv get default_cid`
+
+is_chinamobile_pd_diff=`nv get pd_chinamobile_enable`
+pd_chinamobile=`nv get pd_chinamobile`
+prefix_len=`nv get pd_len_chinamobile`
+
+b_dhcpv6stateEnabled=`nv get dhcpv6stateEnabled`
+b_dhcpv6statelessEnabled=`nv get dhcpv6statelessEnabled`
+
+############# »ñÈ¡Ö¸¶¨Íø¿ÚµÄÈ«¾Ö±äÁ¿ ############
+get_wan_info()
+{
+ echo "wan_name_info = $1"
+
+ #»ñÈ¡¶ÔÓ¦wan¿ÚµÄip mode
+ wan_mode=`nv get $1"_mode"`
+
+ #»ñÈ¡¶ÔÓ¦µÄÍø¿ÚÃû
+ case $1 in
+ "pswan")
+ wan_if=$pswan_name$2 ;;
+ "usbwan")
+ wan_if=$usbwan_if ;;
+ "ethwan")
+ wan_if=$ethwan_if ;;
+ "wifiwan")
+ wan_if=$wifiwan_if ;;
+ esac
+ mtu=`nv get mtu`
+ ifconfig $wan_if mtu $mtu
+
+ #ÐèÒªÓõ½Ïà¹ØÅäÖÃÎļþ
+ dhcp6s_conf=$path_conf/dhcp6s_$wan_if.conf
+ radvd_conf=$path_conf/radvd_$wan_if.conf
+ radvd_pidfile=$path_tmp/radvd_$wan_if.pid
+ #resolv_conf=$path_conf/resolv_$wan_if.conf
+ ndp_log=$path_conf/ndp_$wan_if.log
+
+ #·ÀdosÏà¹ØÅäÖÃ
+ dosenable=`nv get dosenable`
+ if [ "x$dosenable" != "x0" ]; then
+ if [ "$1" == "pswan" ]; then
+ wan6_prefix=$1$2"_prefix"
+ else
+ wan6_prefix=$1"_prefix"
+ fi
+ echo 1 > /sys/module/fast_common/parameters/lan_dos_enable
+ echo "wan6_prefix_name = $wan6_prefix"
+ fi
+
+ echo "wan_if_info = $wan_if"
+}
+
+#Çå³ýÏàÓ¦µÄslaac½ø³Ì
+slaac_kill()
+{
+ ps > ${path_tmp}/zte_ipv6_slaac.${wan_if}.$$
+ slaac_pid=`awk 'BEGIN{temp1="'"${wan_if}"'";temp2="zte_ipv6_slaac"}{if(index($0,temp1)>0 && index($0,temp2)>0){print $1}}' ${path_tmp}/zte_ipv6_slaac.${wan_if}.$$`
+ rm -f ${path_tmp}/zte_ipv6_slaac.${wan_if}.$$
+ [ -n "$slaac_pid" ] && { kill $slaac_pid; echo "Info: kill slaac $slaac_pid " >> $test_log ; }
+}
+
+linkup_get_wan_addr()
+{
+ echo "wan_name_info = $wan_if"
+
+ #disable the forwarding to send RS and not set the addr when receive ra packet
+ #echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ echo 0 > /proc/sys/net/ipv6/conf/$wan_if/accept_ra
+
+ # IPv6ÔÝʱ²»¿¼ÂÇstaticģʽ£¬È罫À´ÓÐÐèÇ󣬲ο¼ipv4ÅäÖÃ
+ # µ±wan_modeΪDHCP£¬»òÕßusbwan¡¢ethwanΪPPP¡¢PPPOEʱ£¬Æô¶¯dhcp6c
+ if [ "$1" == "pswan" ]; then
+
+ if [ "-$wan_mode" == "-dhcp" ]; then
+ ifconfig $wan_if arp 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if arp failed." >> $test_log
+ fi
+ fi
+ #call the slaac program to get the prefix addr
+ ifconfig $wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if up failed." >> $test_log
+ fi
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+ #Èç¹ûµ±Ç°Ã»ÓÐǰ׺£¬ÔòÖ±½ÓÆô¶¯slaac£¬Èç¹ûµ±Ç°Ç°×ºÒѾÉèÖã¬Ôò˵Ã÷ÒѾ»ñÈ¡µ½£¬Ö±½ÓÅäÖÃIPµØÖ·¼´¿É
+ if [ -n "$prefix_info_temp" -a "-$prefix_info_temp" != "-::" ]; then
+ ret_code=0
+ else
+ sleep 1
+ interface_id_temp1=`nv get $wan_if"_ipv6_interface_id"`
+ local_ipv6_addr="fe80::"$interface_id_temp1
+ local_ipv6_addr_nv="$wan_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv=$local_ipv6_addr
+ ip -6 addr add $local_ipv6_addr/64 dev $wan_if 2>>$test_log
+ zte_ipv6_slaac -i "$wan_if"
+ ret_code=$?
+ fi
+
+ echo "the program zte_ipv6_slaac return = $ret_code"
+ if [ $ret_code -eq 0 ]; then
+ echo "the zte_ipv6_slaac success"
+ interface_id_temp=`nv get $wan_if"_ipv6_interface_id"`
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+
+ echo "##############1##########"
+ echo "$interface_id_temp"
+ echo "$prefix_info_temp"
+ echo "##############2##########"
+
+ if [ "x$dosenable" != "x0" ]; then
+ ip6_prefix=`echo "$prefix_info_temp" | awk -F ':' '{printf "0x"$1",0x"$2",0x"$3",0x"$4}'`
+ echo "ip6_prefix1=$ip6_prefix"
+ echo $ip6_prefix > /sys/module/fast_common/parameters/$wan6_prefix
+ fi
+
+
+ wan_addr=$prefix_info_temp$interface_id_temp
+ wan_addr_nv=$wan_if"_ipv6_ip"
+ nv set $wan_addr_nv="$wan_addr"
+ echo "wan_addr = $wan_addr"
+
+ ip -6 addr add $wan_addr/126 dev $wan_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $wan_addr/126 dev $wan_if failed." >> $test_log
+ fi
+
+ killall -9 clatd
+ #clatd -i $wan_if -p 1:1:1:123:: &
+
+ if [ "-$c_id" != "-$def_cid" ]; then
+ wan_pri=`nv get $1"_priority"`
+ rt_num=`expr $wan_pri \* 10 + $c_id`
+ default_gw_addr_temp=`nv get $wan_if"_ipv6_gw"`
+ echo "ipv6_wan_default_gw = $default_gw_addr_temp"
+ ip -6 rule add from $wan_addr table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 rule add from $wan_addr table $rt_num failed." >> $test_log
+ fi
+ if [ -n "$default_gw_addr_temp" -a "-$default_gw_addr_temp" != "-::" ] ; then
+ ip -6 route add default via $default_gw_addr_temp dev $wan_if table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route add default via $default_gw_addr_temp dev $wan_if table $rt_num failed." >> $test_log
+ fi
+ else
+ ip -6 route add default dev $wan_if table $rt_num 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route add default dev $wan_if table $rt_num failed." >> $test_log
+ fi
+ fi
+ ip -6 route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route flush cache failed." >> $test_log
+ fi
+ #sleep 1
+ fi
+ nv set $wan_if"_ipv6_state"="working"
+ else
+ echo "the zte_ipv6_slaac fail"
+ nv set $wan_if"_ipv6_state"="dead"
+ #exit 1
+ fi
+ else
+ #if [ "-$wan_mode" == "-DHCP" -o "-$wan_mode" == "-PPP" -o "-$wan_mode" == "-PPPOE" ]; then
+ #dhcp6c -dDf -z $wan_if &
+ # ²ÉÓÃPDP¼¤»î·ÖÅäµÄipv6µØÖ·
+ #else
+ #call the slaac program to get the prefix addr
+ ifconfig $wan_if up 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if up failed." >> $test_log
+ fi
+ #sleep 1
+ #interface_id_temp1=`nv get $wan_if"_ipv6_interface_id"`
+ interface_id_temp1="0001:0002:0003:0004"
+ nv set $wan_if"_ipv6_interface_id"=$interface_id_temp1
+ local_ipv6_addr="fe80::"$interface_id_temp1
+ local_ipv6_addr_nv="$wan_if""_local_ipv6_addr"
+ nv set $local_ipv6_addr_nv=$local_ipv6_addr
+ ip -6 addr add $local_ipv6_addr/64 dev $wan_if 2>>$test_log
+
+ zte_ipv6_slaac -i "$wan_if"
+ ret_code=$?
+
+ echo "the program zte_ipv6_slaac return = $ret_code"
+ if [ $ret_code -eq 0 ]; then
+ echo "the zte_ipv6_slaac success"
+ #ifconfig $wan_if up 2>>$test_log
+ dhcp6c -dDf -z $wan_if &
+ interface_id_temp=`nv get $wan_if"_ipv6_interface_id"`
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+ if [ "-$prefix_info_temp" == "-" -o "-$prefix_info_temp" == "-::" ]; then
+ echo "wait dhcp6c get ipv6_prefix"
+ sleep 2
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+ fi
+
+ echo "##############1##########"
+ echo "$interface_id_temp"
+ echo "$prefix_info_temp"
+ echo "##############2##########"
+ if [ "-$prefix_info_temp" == "-" -o "-$prefix_info_temp" == "-::" ]; then
+ echo "get ipv6_prefix fail"
+ nv set $wan_if"_ipv6_state"="dead"
+ exit 1
+ fi
+ if [ "x$dosenable" != "x0" ]; then
+ ip6_prefix=`echo "$prefix_info_temp" | awk -F ':' '{printf "0x"$1",0x"$2",0x"$3",0x"$4}'`
+ echo "ip6_prefix2=$ip6_prefix"
+ echo $ip6_prefix > /sys/module/fast_common/parameters/$wan6_prefix
+ fi
+
+ wan_addr=$prefix_info_temp$interface_id_temp
+ wan_addr_nv=$wan_if"_ipv6_ip"
+ nv set $wan_addr_nv="$wan_addr"
+ echo "wan_addr = $wan_addr"
+
+ ip -6 addr add $wan_addr/126 dev $wan_if 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 addr add $wan_addr/126 dev $wan_if failed." >> $test_log
+ fi
+
+ killall -9 clatd
+ #clatd -i $wan_if -p 1:1:1:123:: &
+ else
+ echo "the zte_ipv6_slaac fail"
+ nv set $wan_if"_ipv6_state"="dead"
+ exit 1
+ fi
+ #fi
+ fi
+}
+
+#############linkdown radvd set############
+linkdown_radvd_set()
+{
+ if [ "-$b_dhcpv6stateEnabled" = "-1" ];then
+ radvd_kill
+ return
+ else
+ sed -i -e s/AdvValidLifetime.*/'AdvValidLifetime 30;'/g $radvd_conf
+ sed -i -e s/AdvPreferredLifetime.*/'AdvPreferredLifetime 1;'/g $radvd_conf
+ fi
+
+ if [ "-$is_chinamobile_pd_diff" = "-1" ] ; then
+ if [ "-$pd_chinamobile" == "-" ] ; then
+ echo "no pd info get"
+ else
+ radvd_kill
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -s -p $radvd_pidfile &
+ nv set pd_chinamobile=""
+ nv set pd_len_chinamobile=""
+ radvd_kill
+ fi
+ fi
+
+ radvd_kill
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -s -p $radvd_pidfile &
+}
+
+#############linkdown wanaddr route set############
+linkdown_route_set()
+{
+ echo "wan_name_info = $wan_if"
+
+ wan_addr=`nv get $wan_if"_ipv6_ip"`
+ ip -6 addr del $wan_addr/126 dev $wan_if
+
+ local_ipv6_addr_nv="$wan_if""_local_ipv6_addr"
+ local_ipv6_addr=`nv get $local_ipv6_addr_nv`
+ ip -6 addr del $local_ipv6_addr/64 dev $wan_if 2>>$test_log
+ #if [ $? -ne 0 ];then
+ # echo "Error: ip -6 addr del $wan_addr/126 dev $wan_if failed." >> $test_log
+ #fi
+
+ killall clatd
+ sh $path_sh/clat_config.sh down $wan_if
+
+ if [ "-$c_id" == "-0" -o "-$c_id" == "-$def_cid" ]; then
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ ip -6 route del default
+ ip route del default
+ killall clatd
+ iptables -t nat -D POSTROUTING -o v4-$wan_if -j MASQUERADE
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 route del default failed." >> $test_log
+ #fi
+
+ nv set ipv6_br0_addr="::"
+ ipv6_addr_conver $wan_addr "$wan_if"
+ ipv6_br0_addr_tmp=`nv get ipv6_br0_addr`
+ ip -6 addr del $ipv6_br0_addr_tmp/64 dev br0
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 addr del $ipv6_br0_addr_tmp/64 dev br0 failed." >> $test_log
+ #fi
+
+ #ÊÊÅäÒ³ÃæµÈÆäËûµØ·½Ê¹ÓÃÀÏNV
+ nv set ipv6_wan_ipaddr="::"
+
+ def_cid=`nv get default_cid`
+ if [ "-$c_id" == "-$def_cid" ]; then
+ nv set default_cid=""
+ nv set $wan_if"_ipv6_state"="dead"
+ fi
+ else
+ wan_pri=`nv get $1"_priority"`
+ rt_num=`expr $wan_pri \* 10 + $c_id`
+
+ default_gw_addr_temp=`nv get $wan_if"_ipv6_gw"`
+ echo "ipv6_wan_default_gw = $default_gw_addr_temp"
+
+ ip -6 rule del from $wan_addr table $rt_num
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 rule del from $wan_addr table $rt_num failed." >> $test_log
+ #fi
+ if [ -n "$default_gw_addr_temp" ] ; then
+ ip -6 route del default via $default_gw_addr_temp dev $wan_if table $rt_num
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 route del default via $default_gw_addr_temp dev $wan_if table $rt_num failed." >> $test_log
+ #fi
+ else
+ ip -6 route del default dev $wan_if table $rt_num
+ #if [ $? -ne 0 ];then
+ #echo "Error: ip -6 route del default dev $wan_if table $rt_num failed." >> $test_log
+ #fi
+ fi
+ ip -6 route flush cache 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ip -6 route flush cache failed." >> $test_log
+ fi
+
+ nv set $wan_if"_ipv6_state"="dead"
+
+ fi
+
+ echo 0 > /proc/sys/net/ipv6/conf/$wan_if/accept_ra
+
+ #reset wan'nv
+ nv set $wan_if"_ipv6_ip"="::"
+ nv set $wan_if"_ipv6_pridns_auto"="::"
+ nv set $wan_if"_ipv6_secdns_auto"="::"
+ nv set $wan_if"_ipv6_gw"="::"
+ nv set $wan_if"_ipv6_interface_id"="::"
+ nv set $wan_if"_ipv6_prefix_info"="::"
+ nv set $wan_if"_dhcpv6_start"="::"
+ nv set $wan_if"_dhcpv6_end"="::"
+ nv set $wan_if"_radvd_ipv6_dns_servers"="::"
+
+ if [ "x$dosenable" != "x0" ]; then
+ echo 0,0,0,0 > /sys/module/fast_common/parameters/$wan6_prefix
+ fi
+ if [ "$1" == "pswan" ]; then
+ ifconfig $wan_if down 2>>$test_log
+ if [ $? -ne 0 ];then
+ echo "Error: ifconfig $wan_if down failed." >> $test_log
+ fi
+ fi
+}
+
+#Çå³ýÏàÓ¦µÄDHCPv6½ø³Ì
+linkdown_dhcpv6_server_set()
+{
+ dhcp6c_kill
+ dhcp6s_kill
+}
+
+del_default_wan6()
+{
+ default_wan6_name=`nv get default_wan6_name`
+ if [ "-$1" == "-$default_wan6_name" ]; then
+ nv set default_wan6_name=""
+ nv set default_wan6_rel=""
+ fi
+}
+############ipv6 shell entry#################
+get_wan_info $2 $3
+
+case $1 in
+ "linkup")
+ linkup_get_wan_addr $2 $3
+
+ ;;
+
+ "linkdown")
+ if [ "-$2" == "-pswan" ]; then
+ tc_tbf.sh down $def_cid
+ fi
+ linkdown_radvd_set
+ linkdown_dhcpv6_server_set
+ linkdown_route_set $2
+ slaac_kill
+ ndp_kill
+ del_default_wan6 $wan_if
+ ;;
+
+esac
+
+
+if [ "-$c_id" == "-0" -o "-$c_id" == "-$def_cid" ]; then
+ (router_msg_proxy ipv6 wan_ipv6.sh >> $test_log 2>&1 || echo "Error: router_msg_proxy ipv6 wan_ipv6.sh failed." >> $test_log) &
+fi
diff --git a/ap/app/Script/scripts/wan_ipv6_config.sh b/ap/app/Script/scripts/wan_ipv6_config.sh
new file mode 100755
index 0000000..9098fab
--- /dev/null
+++ b/ap/app/Script/scripts/wan_ipv6_config.sh
@@ -0,0 +1,292 @@
+#!/bin/sh
+
+path_sh=`nv get path_sh`
+. $path_sh/global.sh
+
+echo "input param is $1"
+echo "Info: wan_ipv6_config.sh $1 start" >> $test_log
+
+wan_addr_temp=`nv get $wan_if"ipv6_wan_ipaddr"`
+wan_addr=`echo $wan_addr_temp | sed 's/\/64//'`
+
+is_chinamobile_pd_diff=`nv get pd_chinamobile_enable`
+pd_chinamobile=`nv get pd_chinamobile`
+#prefix_len=`nv get pd_len_chinamobile`
+prefix_len=`nv get $wan_if"_ipv6_prefix_len"`
+
+b_dhcpv6stateEnabled=`nv get dhcpv6stateEnabled`
+b_dhcpv6statelessEnabled=`nv get dhcpv6statelessEnabled`
+b_dhcpv6statePdEnabled=`nv get dhcpv6statePdEnabled`
+
+############# »ñȡĬÈÏÍø¿ÚÃûÏà¹ØÐÅÏ¢ ############
+get_default_wan_info()
+{
+ wan_if_name=$1
+ wan_if=$defwan6_if
+ wan_addr=`nv get $wan_if"_ipv6_ip"`
+ def_cid=`nv get default_cid`
+
+ if [ "$1" == "pswan" ]; then
+ ipaddr_type=`nv get "pdp_act_type"$def_cid`
+ elif [ "$1" == "ethwan" ]; then
+ ipaddr_type=`nv get eth_act_type`
+ elif [ "$1" == "wifiwan" ]; then
+ ipaddr_type=`nv get wifi_act_type`
+ fi
+
+ #ÐèÒªÓõ½Ïà¹ØÅäÖÃÎļþ
+ dhcp6s_conf=$path_conf/dhcp6s_$wan_if.conf
+ radvd_conf=$path_conf/radvd_$wan_if.conf
+ radvd_pidfile=$path_tmp/radvd_$wan_if.pid
+ ndp_log=$path_conf/ndp_$wan_if.log
+
+ echo "test: default_wan_if_info = $wan_if, wan_addr:$wan_addr"
+}
+
+#############linkup dhcpserver set############
+linkup_add_dns_to_dhcp6s_radvd_conf()
+{
+ # ipv6 dns set
+ ipv6_dns_mode=`nv get $wan_if_name"_ipv6_dns_mode"`
+ echo "ipv6_dns_mode:$ipv6_dns_mode"
+ echo "the input param is $1"
+
+ ipv6_prefer_dns=""
+ ipv6_standby_dns=""
+ if [ "-$ipv6_dns_mode" = "-auto" ];then
+
+ ipv6_pridns_auto=`nv get $wan_if"_ipv6_pridns_auto"`
+ ipv6_secdns_auto=`nv get $wan_if"_ipv6_secdns_auto"`
+
+ if [ -n "$ipv6_pridns_auto" ] && [ "-$ipv6_pridns_auto" != "-::" ] && [ "-$ipv6_pridns_auto" != "-::0" ];then
+ ipv6_prefer_dns=$ipv6_pridns_auto
+ fi
+
+ if [ -n "$ipv6_secdns_auto" ] && [ "-$ipv6_secdns_auto" != "-::" ] && [ "-$ipv6_secdns_auto" != "-::0" ];then
+ ipv6_standby_dns=$ipv6_secdns_auto
+ fi
+
+ elif [ "-$ipv6_dns_mode" = "-manual" ];then
+ #¶ÔÓÚÊÖ¶¯DNS£¬Ò³ÃæÖ»ÄÜÉèÖõ½pswan¿Ú£¬ËùÒÔ¶ÔÓÚÊÖ¶¯dns£¬²»¹ÜºÎÖÖģʽ£¬ÔÝʱ¶¼È¡ÓÃpswanµÄÊÖ¶¯dnsµØÖ·
+ ipv6_pridns_manual=`nv get $pswan_if_name"_ipv6_pridns_manual"`
+ ipv6_secdns_manual=`nv get $pswan_if_name"_ipv6_secdns_manual"`
+
+ if [ -n "$ipv6_pridns_manual" ] && [ "-$ipv6_pridns_manual" != "-::" ] && [ "-$ipv6_pridns_manual" != "-::0" ];then
+ ipv6_prefer_dns=$ipv6_pridns_manual
+ fi
+
+ if [ -n "$ipv6_secdns_manual" ] && [ "-$ipv6_secdns_manual" != "-::" ] && [ "-$ipv6_secdns_manual" != "-::0" ];then
+ ipv6_standby_dns=$ipv6_secdns_manual
+ fi
+
+ fi
+
+ if [ "-$ipv6_prefer_dns" == "-" -a "-$ipv6_standby_dns" == "-" ]; then
+ return
+ else
+ if [ -n "$1" ] && [ "$1" == "dhcp6s" ] ;then
+ echo -e "\toption dns_servers $ipv6_prefer_dns $ipv6_standby_dns;" >> $dhcp6s_conf
+ elif [ -n "$1" ] && [ "$1" == "radvd" ] ;then
+ # del last line
+ sed -i '$d' $radvd_conf
+ echo -e "\tRDNSS $ipv6_prefer_dns $ipv6_standby_dns\n\t{" >> $radvd_conf
+ echo -e "\t\tAdvRDNSSPreference 15;" >> $radvd_conf
+ echo -e "\t\tAdvRDNSSOpen on;" >> $radvd_conf
+ echo -e "\t};\n};" >> $radvd_conf
+ fi
+ fi
+}
+
+linkup_dhcpv6_server_set()
+{
+ dhcp6s_kill
+ rm -fr $dhcp6s_conf
+
+ if [ "-$is_chinamobile_pd_diff" = "-1" ] ; then
+ nv set pd_chinamobile=""
+ nv set pd_len_chinamobile=""
+ dhcp6c -dDf -z $wan_if &
+ for i in a b c d e; do
+ #sleep 1;
+ pd_chinamobile=`nv get pd_chinamobile`
+ if [ "-$pd_chinamobile" == "-" ]; then
+ echo "no pd get";
+ else
+ echo "pd get";
+ break;
+ fi
+ done
+ pd_chinamobile=`nv get pd_chinamobile`
+ prefix_len=`nv get pd_len_chinamobile`
+ if [ "-$pd_chinamobile" == "-" ]; then
+ dhcp6c_kill
+ prefix_len="64"
+ else
+ wan_addr=$pd_chinamobile
+ # here br0 is bind by dhcp6c, need to kill then run dhcp6s£¬need to fix
+ dhcp6c_kill
+ #sleep 1
+ fi
+ else
+ if [ "-$prefix_len" == "-" ]; then
+ prefix_len=64
+ fi
+ echo "not chinamobile"
+ fi
+
+ ipv6_addr_conver "$wan_addr" "$wan_if"
+ dhcpv6_start=`nv get $wan_if"_dhcpv6_start"`
+ dhcpv6_end=`nv get $wan_if"_dhcpv6_end"`
+ prefix_info_temp=`nv get $wan_if"_ipv6_prefix_info"`
+ echo -e "interface br0 {" > $dhcp6s_conf
+ #dhcpv6 pd
+ if [ "-$b_dhcpv6statePdEnabled" = "-1" ];then
+ echo -e "\tserver-preference 255;\n\trenew-time 6000;" >> $dhcp6s_conf
+ echo -e "\trebind-time 9000;\n\tprefer-life-time 1300;" >> $dhcp6s_conf
+ echo -e "\tvalid-life-time 2000;\n\tallow rapid-commit;" >> $dhcp6s_conf
+ echo -e "\tlink br0 {\n\t\tallow unicast;\n\t\tsend unicast;" >> $dhcp6s_conf
+ echo -e "\t\tprefix $prefix_info_temp:/$prefix_len;\n\t};" >> $dhcp6s_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf dhcp6s
+ echo -e "};" >> $dhcp6s_conf
+ dhcp6s -dDf -c $dhcp6s_conf $lan_if &
+ return
+ fi
+ #set up dhcpv6 addr pool
+ if [ "-$b_dhcpv6stateEnabled" = "-1" ];then
+ echo -e "\tserver-preference 255;\n\trenew-time 6000;" >> $dhcp6s_conf
+ echo -e "\trebind-time 9000;\n\tprefer-life-time 1300;" >> $dhcp6s_conf
+ echo -e "\tvalid-life-time 2000;\n\tallow rapid-commit;" >> $dhcp6s_conf
+ echo -e "\tlink br0 {\n\t\tallow unicast;\n\t\tsend unicast;" >> $dhcp6s_conf
+ echo -e "\t\tpool {\n\t\t\trange $dhcpv6_start to $dhcpv6_end/$prefix_len;" >> $dhcp6s_conf
+ echo -e "\t\t};\n\t};" >> $dhcp6s_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf dhcp6s
+ echo -e "};" >> $dhcp6s_conf
+ dhcp6s -dDf -c $dhcp6s_conf $lan_if &
+ else
+ #slaac with dhcp statelessset dns info
+ if [ "-$b_dhcpv6statelessEnabled" = "-1" ];then
+ echo -e "\tlink br0 {\n\t};" >> $dhcp6s_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf dhcp6s
+ echo -e "};" >> $dhcp6s_conf
+ dhcp6s -dDf -c $dhcp6s_conf $lan_if &
+ fi
+ fi
+}
+
+#############linkup radvd set############
+linkup_radvd_set()
+{
+ echo "enter linkup_radvd_set "
+
+ if [ "-$is_chinamobile_pd_diff" = "-1" ] ; then
+ pd_chinamobile=`nv get pd_chinamobile`
+ prefix_len=`nv get pd_len_chinamobile`
+ if [ "-$pd_chinamobile" == "-" ]; then
+ prefix_len="64"
+ else
+ wan_addr=$pd_chinamobile
+ fi
+ else
+ if [ "-$prefix_len" == "-" ]; then
+ prefix_len=64
+ fi
+ echo "not chinamobile"
+ fi
+
+ rm -rf $radvd_conf
+ #wangming delete
+ if [ "-$b_dhcpv6stateEnabled" = "-1" -o "-$b_dhcpv6statePdEnabled" = "-1"];then
+ echo -e "interface br0\n{\n\tAdvSendAdvert on;" > $radvd_conf
+ echo -e "\tAdvManagedFlag on;\n};" >> $radvd_conf
+ radvd_kill
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -p $radvd_pidfile &
+ echo "leave linkup_radvd_set "
+ return
+ fi
+
+ cp $path_ro/radvd_template.conf $radvd_conf
+
+ sed -i -e 's/#ipv6_wan_addr#\/64/#ipv6_wan_addr#\/#prefix_len#/g' $radvd_conf
+ sed -i -e s/#ipv6_wan_addr#/$wan_addr/g $radvd_conf
+ sed -i -e s/#prefix_len#/$prefix_len/g $radvd_conf
+ sed -i -e s/#adv_switch#/on/g $radvd_conf
+
+ echo "copy radvd_template.conf"
+ echo "wan_addr:$wan_addr"
+ echo "prefix_len:$prefix_len"
+
+#slaac with dns info
+ if [ "-$b_dhcpv6statelessEnabled" = "-1" ];then
+ echo "use dhcpv6stateless for dns"
+ else
+ sed -i -e 's/AdvOtherConfigFlag on;/AdvOtherConfigFlag off;/g' $radvd_conf
+ linkup_add_dns_to_dhcp6s_radvd_conf radvd
+ fi
+
+ radvd_kill
+ #sleep 1
+ rm -rf $radvd_pidfile
+ radvd -d 3 -C $radvd_conf -p $radvd_pidfile &
+
+ echo "leave linkup_radvd_set "
+}
+
+#############linkup resolve config set############
+linkup_route_set()
+{
+ default_gw_addr_temp=`nv get $wan_if"_ipv6_gw"`
+ echo "ipv6_wan_default_gw = $default_gw_addr_temp"
+
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+
+ if [ -n "$default_gw_addr_temp" -a "-$default_gw_addr_temp" != "-::" ] ; then
+ ip -6 route add default via $default_gw_addr_temp dev $defwan6_rel
+ else
+ ip -6 route add default dev $defwan6_rel
+ fi
+
+ nv set ipv6_br0_addr="::"
+
+ ipv6_addr_conver "$wan_addr" "$wan_if"
+
+ ipv6_br0_addr_tmp=`nv get ipv6_br0_addr`
+ echo "ipv6_br0_addr_tmp = $ipv6_br0_addr_tmp"
+
+ ip -6 addr add $ipv6_br0_addr_tmp/64 dev br0
+
+ #enable ipv6 packet forwarding
+ #sleep 3
+ echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
+
+ #enable ipv6 neigh discovery proxy
+ echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp
+
+ ndp_kill
+ zte_ndp -a -s br0 -d "$wan_if" -l $ndp_log &
+ xlat_enable=`nv get xlat_enable`
+ if [ "-$xlat_enable" == "-1" ];then
+ route_info=`route|grep default`
+ if [ "$route_info" == "" ];then
+ xlat_prefix=`nv get xlat_prefix`
+ #chmod 777 /dev/net/tun
+ if [ "$xlat_prefix" == "" ];then
+ clatd -i $defwan6_if &
+ else
+ clatd -i $defwan6_if -p $xlat_prefix &
+ fi
+ echo 1 > /proc/sys/net/ipv4/ip_forward
+ iptables -t nat -A POSTROUTING -o v4-$defwan6_if -j MASQUERADE
+ sleep 1
+ ip route add default dev v4-$defwan6_if
+ fi
+ fi
+}
+
+############ipv6 shell entry#################
+get_default_wan_info $1
+linkup_route_set
+linkup_dhcpv6_server_set
+linkup_radvd_set
+#linkup_resolve_config_set #ÓÉzte_router¶ÔIPv4£¬IPv6ͳ¼Æ½øÐÐdnsµÄÏà¹Ø²Ù×÷
+
diff --git a/ap/app/Script/scripts/zte_watch_devid_qrcode.sh b/ap/app/Script/scripts/zte_watch_devid_qrcode.sh
new file mode 100755
index 0000000..781c4c5
--- /dev/null
+++ b/ap/app/Script/scripts/zte_watch_devid_qrcode.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+##
+# $Id: zte_qrcode_create.sh,v 0.0.0.1 2013.05.06 liuweipeng Exp $
+#
+# usage: zte_qrcode_create.sh
+#
+
+#wifi_ssid_qrcode_name='/usr/zte_web/web/img/qrcode_ssid_wifikey.png'
+#wifi_ssid_qrcode_name_bmp='/usr/zte/zte_conf/mmi/mmi_image/ssid_wifikey.bmp'
+
+#multi_wifi_ssid_qrcode_name='/usr/zte_web/web/img/qrcode_multi_ssid_wifikey.png'
+#multi_wifi_ssid_qrcode_name_bmp='/usr/zte/zte_conf/mmi/mmi_image/multi_ssid_wifikey.bmp'
+
+#local_domain_qrcode_name='/usr/zte_web/web/img/qrcode_local_domaind.png'
+#local_domain_qrcode_name_bmp='/usr/zte/zte_conf/mmi/mmi_image/local_domaind.bmp'
+
+reg_id_text=`nv get reg_id`
+dl_url_text=`nv get app_dl_url`
+
+device_qrcode_name="/etc_rw/zcore/system/qrcode_devid.png"
+appdl_qrcode_name="/etc_rw/zcore/system/qrcode_appdl.png"
+
+
+echo "device_qrcode_name=$device_qrcode_name"
+
+echo "enter the device id qrcode create"
+
+
+rm -rf $device_qrcode_name
+rm -rf $appdl_qrcode_name
+
+qrencode -o $appdl_qrcode_name -m 1 -s 7 "$dl_url_text"
+qrencode -o $device_qrcode_name -m 1 -s 7 "$reg_id_text"
+
+