zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/app/Script/wifi_script/realtek/bridge.sh b/ap/app/Script/wifi_script/realtek/bridge.sh
new file mode 100644
index 0000000..3fecf65
--- /dev/null
+++ b/ap/app/Script/wifi_script/realtek/bridge.sh
@@ -0,0 +1,173 @@
+#!/bin/sh
+#
+# script file to start bridge
+#
+# Usage: bridge.sh br_interface lan1_interface wlan_interface[1]..wlan_interface[N]
+#
+
+## error code
+ERROR_SUCCESS=0
+ERROR_INVALID_PARAMETERS=1
+ERROR_NO_SUCH_DEVICE=2
+ERROR_NO_CONFIG_FILE=3
+ERROR_NO_SUCH_FILE=4
+ERROR_NO_SUCH_DIRECTORY=5
+ERROR_NULL_FILE=6
+ERROR_NET_IF_UP_FAIL=7
+ERROR_ADD_BR_FAIL=8
+ERROR_ADD_IF_FAIL=9
+
+
+if [ $# -lt 2 ]; then
+ echo "Usage: $0 br_interface lan1_interface wlan_interface ..." >> $LOG
+ exit $ERROR_INVALID_PARAMETERS;
+fi
+
+
+ROOT=`nv get wifi_root_dir`
+LOG=$ROOT/wifi/realtek/slog
+#CUR_PATH=`pwd`
+CONFIG_ROOT_DIR="$ROOT/wifi/realtek/rtl8192c"
+
+if [ -z "$WLAN_PREFIX" ]; then
+ WLAN_PREFIX=wlan
+fi
+
+LAN_PREFIX=eth
+BR_UTIL=brctl
+IFCONFIG=ifconfig
+SLEEP=sleep
+## test for to RESTART_BR be 1
+RESTART_BR=0
+RESTART_LAN=0
+RESTART_WLAN=1
+
+#set PARA for $i can't pass to function
+BR_INTF=$1
+PARA2=$2
+PARA3=$3
+PARA_ALL=$*
+
+BR_NOT_EXIST=0
+
+rtl_shutdown_net_if() {
+ if [ $BR_NOT_EXIST != 0 ]; then
+ return;
+ fi
+
+ # shutdown network interface (ethernet, wlan)
+ for ARG in $PARA_ALL ; do
+ case $ARG in
+ $LAN_PREFIX*)
+ if [ $RESTART_LAN != 0 ]; then
+ $IFCONFIG $ARG down
+ $BR_UTIL delif $BR_INTF $ARG 2> /dev/null
+ fi
+ ;;
+ $WLAN_PREFIX*)
+ if [ $RESTART_WLAN != 0 ]; then
+ $IFCONFIG $ARG down
+ $BR_UTIL delif $BR_INTF $ARG 2> /dev/null
+ fi
+ ;;
+ *)
+ ;;
+ esac
+ done
+}
+
+rtl_enable_net_if() {
+ # Enable network interface (Ethernet, wlan, WDS, bridge)
+ if [ $RESTART_BR != 0 ]; then
+ echo 'Setup bridge...' >> $LOG
+ if [ $BR_NOT_EXIST != 0 ]; then
+ $BR_UTIL addbr $BR_INTF
+ if [ $? != 0 ]; then
+ echo "Failed: $BR_UTIL addbr $BR_INTF"
+ exit $ERROR_ADD_BR_FAIL;
+ fi
+ fi
+ #$BR_UTIL setfd $BR_INTF 0
+ #$BR_UTIL stp $BR_INTF 0
+ fi
+ #IP_ADDR=`cat $CONFIG_ROOT_DIR/ip_addr`
+ #SUBNET_MASK=`cat $CONFIG_ROOT_DIR/net_mask`
+ #$IFCONFIG $BR_INTF $IP_ADDR netmask $SUBNET_MASK
+
+ #Add lan port to bridge interface
+ if [ $RESTART_LAN != 0 ]; then
+ for ARG in $PARA_ALL ; do
+ case $ARG in
+ $LAN_PREFIX*)
+ $BR_UTIL addif $BR_INTF $ARG 2> /dev/null
+ $IFCONFIG $ARG 0.0.0.0
+ ;;
+ *)
+ ;;
+ esac
+ done
+ fi
+
+ if [ $RESTART_WLAN != 0 ]; then
+ for ARG in $PARA_ALL ; do
+ case $ARG in
+ $WLAN_PREFIX*)
+ CONFIG_DIR=$CONFIG_ROOT_DIR/$ARG
+ WLAN_DISABLED_VALUE=`cat $CONFIG_DIR/wlan_disabled`
+ echo "$CONFIG_DIR/wlan_disabled = $WLAN_DISABLED_VALUE " >> $LOG
+
+ ISUP=`$IFCONFIG $ARG | grep UP`
+ if [ "$WLAN_DISABLED_VALUE" = 0 -a "$ISUP" = "" ]; then
+
+ echo "$IFCONFIG $ARG up" >> $LOG
+ $IFCONFIG $ARG up
+ if [ $? != 0 ]; then
+ echo "$IFCONFIG $ARG up failed " >> $LOG
+ exit $ERROR_NET_IF_UP_FAIL;
+ fi
+
+
+ if [ "$ARG" != "wlan0" -a "$ARG" != "wlan0-vxd" ]; then
+ HAS_BEEN_ADDED=`$BR_UTIL show | grep $ARG`
+ if [ ! -z "$HAS_BEEN_ADDED" ]; then
+ echo "$ARG has been added to $BR_UTIL :: $HAS_BEEN_ADDED" >> $LOG
+ else
+ echo "$ARG has not been added to $BR_UTIL :: $HAS_BEEN_ADDED" >> $LOG
+ echo "$BR_UTIL addif $BR_INTF $ARG" >> $LOG
+ $BR_UTIL addif $BR_INTF $ARG 2> /dev/null
+
+ if [ $? != 0 ]; then
+ echo "Failed: $BR_UTIL addif $BR_INTF $ARG" >> $LOG
+ exit $ERROR_ADD_IF_FAIL;
+ fi
+
+ fi
+
+
+ #IP_ADDR=`cat $CONFIG_DIR/ip_addr`
+ #$IFCONFIG $ARG $IP_ADDR
+ $IFCONFIG $ARG 0.0.0.0
+ fi
+
+ #$SLEEP 1
+ fi
+ ;;
+ *)
+ ;;
+ esac
+ done
+ fi
+}
+#end of rtl_enable_net_if
+
+rtl_bridge() {
+ BR_NOT_EXIST=`$IFCONFIG $BR_INTF > /dev/null 2>&1; echo $?`
+ if [ "$PARA3" != "null" ]; then
+ #rtl_shutdown_net_if
+ rtl_enable_net_if
+ fi
+}
+
+
+rtl_bridge
+