zte's code,first commit

Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/app/Script/wifi_script/realtek/wlan_8192c1.sh b/ap/app/Script/wifi_script/realtek/wlan_8192c1.sh
new file mode 100755
index 0000000..89a93ef
--- /dev/null
+++ b/ap/app/Script/wifi_script/realtek/wlan_8192c1.sh
@@ -0,0 +1,556 @@
+#!/bin/sh
+#
+# script file to start WLAN
+#
+
+
+## error code
+ERROR_SUCCESS=0
+ERROR_INVALID_PARAMETERS=1
+ERROR_NO_SUCH_DEVICE=2
+ERROR_NO_CONFIG_FILE=3
+ERROR_NO_SUCH_FILE=4
+ERROR_NO_SUCH_DIRECTORY=5
+ERROR_NULL_FILE=6
+ERROR_NET_IF_UP_FAIL=7
+
+IWPRIV=iwpriv
+wifi_lte_intr=`nv get wifi_lte_intr`
+
+if [ $# -lt 1 ]; then
+	echo "Usage: $0 wlan_interface" >> $LOG
+	exit $ERROR_INVALID_PARAMETERS;
+fi
+
+ROOT=`nv get wifi_root_dir`
+
+LOG=$ROOT/wifi/realtek/slog
+CONFIG_ROOT_DIR="$ROOT/wifi/realtek/rtl8192c"
+
+CONFIG_DIR=$CONFIG_ROOT_DIR/$1
+echo "$1 config para" >> $LOG
+if [ ! -d "$CONFIG_DIR" ]; then
+	echo "$CONFIG_DIR: No such directory" >> $LOG
+	exit $ERROR_NO_CONFIG_FILE
+fi
+
+if [ -z "$SCRIPT_DIR" ]; then
+	SCRIPT_DIR=`cat $CONFIG_ROOT_DIR/wifi_script_dir`
+fi
+#echo $SCRIPT_DIR
+#START_WLAN_APP=$SCRIPT_DIR/wlanapp_8192c.sh
+
+if [ -z "$WLAN_PREFIX" ]; then
+	WLAN_PREFIX=wlan
+fi
+#WLAN_PREFIX_LEN=${#WLAN_PREFIX}
+#WLAN_NAME_LEN=$((WLAN_PREFIX_LEN + 1))
+
+if [ -z "$ROOT_WLAN" ]; then
+#	ROOT_WLAN=${1:0:$WLAN_NAME_LEN}
+### delete -va0 get wlan0
+	ROOT_WLAN=${1%%-*}  
+fi
+ROOT_CONFIG_DIR=$CONFIG_ROOT_DIR/$ROOT_WLAN
+
+IS_ROOT_WLAN=0
+if [ "$1" = "$ROOT_WLAN" ]; then
+	IS_ROOT_WLAN=1
+fi
+echo "IS_ROOT_WLAN is " $IS_ROOT_WLAN
+SET_WLAN="iwpriv $1"
+SET_WLAN_PARAM="$SET_WLAN set_mib"
+IFCONFIG=ifconfig
+
+## Disable WLAN MAC driver and shutdown interface first ##
+$IFCONFIG $1 down
+if [ $? != 0 ]; then
+	exit $ERROR_NO_SUCH_DEVICE
+fi
+
+GET_VALUE=
+GET_VALUE_TMP=
+GET_VALUE_WLAN_DISABLED=`cat $CONFIG_DIR/wlan_disabled`
+GET_VALUE_WLAN_MODE=`cat $CONFIG_DIR/wlan_mode`
+
+echo "$CONFIG_DIR/wlan_disabled =$GET_VALUE_WLAN_DISABLED " >> $LOG
+echo "$CONFIG_DIR/wlan_mode =$GET_VALUE_WLAN_MODE " >> $LOG
+
+
+##$SET_WLAN set_mib vap_enable=0
+$SET_WLAN set_mib wsc_enable=0
+
+## kill wlan application daemon ##
+
+##$START_WLAN_APP kill $1
+
+## Set parameters to driver ##
+
+GET_VALUE=`cat $ROOT_CONFIG_DIR/reg_domain`
+$SET_WLAN set_mib regdomain=$GET_VALUE
+
+NUM=0
+case $1 in
+$ROOT_WLAN-va*)
+	NUM=${1#$ROOT_WLAN-va}
+	#NUM=$((NUM + 1))
+	NUM=`expr $NUM + 1`	
+	;;
+esac
+
+
+GET_VALUE=`cat $ROOT_CONFIG_DIR/wlan${NUM}_addr`
+iwpriv $1 set_mib hwaddr=$GET_VALUE
+
+echo "iwpriv $1 set_mib hwaddr=$GET_VALUE" >> $LOG
+
+if [ "$GET_VALUE_WLAN_MODE" = '1' ]; then
+	## client mode 0: infrastructure  1:Ad-hoc
+	
+	hwaddr=`cat /proc/wlan0-vxd/mib_all | grep hwaddr`
+	
+	echo wlan0-vxd hwaddr=$hwaddr >> $LOG
+	
+	GET_VALUE=`cat $CONFIG_DIR/network_type`
+	if  [ "$GET_VALUE" = '0' ]; then
+		$SET_WLAN set_mib opmode=8
+	else
+		$SET_WLAN set_mib opmode=32
+		GET_VALUE_TMP=`cat $CONFIG_DIR/default_ssid`
+		$SET_WLAN set_mib defssid="$GET_VALUE_TMP"
+	fi
+	echo "wlan0-vxd do not set para, exit directly" >> $LOG
+	exit $ERROR_SUCCESS
+else
+	## AP mode
+	$SET_WLAN set_mib opmode=16
+fi
+##$IFCONFIG $1 hw ether $WLAN_MAC_ADDR
+
+##if [ "$GET_VALUE_WLAN_MODE" = '2' ]; then
+##		$SET_WLAN set_mib wds_pure=1
+##else
+##		$SET_WLAN set_mib wds_pure=0
+##fi
+
+echo "set RF parameters" >> $LOG
+# set RF parameters
+if [ $IS_ROOT_WLAN = 1 ]; then
+	GET_VALUE=`cat $CONFIG_DIR/channel`
+	$SET_WLAN set_mib channel=$GET_VALUE
+##autochannel can use wifi_lte_intr
+	if [ "$wifi_lte_intr" = "1" -a "$GET_VALUE" = "0" ];then
+		echo "wifi_lte_intr=$wifi_lte_intr  $SET_WLAN set_mib ch_low=5" >> $LOG	
+		$SET_WLAN set_mib ch_low=5
+#		$SET_WLAN set_mib disable_acs_ch=15
+	else
+		GET_VALUE=`cat $CONFIG_DIR/ch_low`
+		$SET_WLAN set_mib ch_low=$GET_VALUE
+	fi
+	
+	GET_VALUE=`cat $CONFIG_DIR/ch_hi`
+	$SET_WLAN set_mib ch_hi=$GET_VALUE
+	
+	GET_VALUE=`cat $CONFIG_DIR/led_type`
+	$SET_WLAN set_mib led_type=$GET_VALUE
+	
+	GET_VALUE=`cat $CONFIG_DIR/MIMO_TR_mode`
+	$SET_WLAN set_mib MIMO_TR_mode=$GET_VALUE
+	
+	#GET_TX_POWER_CCK_A=`cat $CONFIG_DIR/tx_power_cck_a`
+	#GET_TX_POWER_CCK_B=`cat $CONFIG_DIR/tx_power_cck_b`
+	#GET_TX_POWER_HT40_1S_A=`cat $CONFIG_DIR/tx_power_ht40_1s_a`
+	#GET_TX_POWER_HT40_1S_B=`cat $CONFIG_DIR/tx_power_ht40_1s_b`
+
+	#GET_TX_POWER_DIFF_HT40_2S=`cat $CONFIG_DIR/tx_power_diff_ht40_2s`
+	#GET_TX_POWER_DIFF_HT20=`cat $CONFIG_DIR/tx_power_diff_ht20`
+	#GET_TX_POWER_DIFF_OFDM=`cat $CONFIG_DIR/tx_power_diff_ofdm`
+
+	#$SET_WLAN set_mib pwrlevelCCK_A=$GET_TX_POWER_CCK_A
+	#$SET_WLAN set_mib pwrlevelCCK_B=$GET_TX_POWER_CCK_B
+	#$SET_WLAN set_mib pwrlevelHT40_1S_A=$GET_TX_POWER_HT40_1S_A
+	#$SET_WLAN set_mib pwrlevelHT40_1S_B=$GET_TX_POWER_HT40_1S_B
+	#$SET_WLAN set_mib pwrdiffHT40_2S=$GET_TX_POWER_DIFF_HT40_2S
+	#$SET_WLAN set_mib pwrdiffHT20=$GET_TX_POWER_DIFF_HT20
+	#$SET_WLAN set_mib pwrdiffOFDM=$GET_TX_POWER_DIFF_OFDM
+	
+	GET_TX_POWER_PERCENT=`cat $CONFIG_DIR/tx_power_percet`
+	#echo "GET_TX_POWER_PERCENT is "$GET_TX_POWER_PERCENT
+	$SET_WLAN set_mib powerpercent=$GET_TX_POWER_PERCENT
+	
+	GET_11N_TSSI1=`cat $CONFIG_DIR/tssi_1`
+	$SET_WLAN set_mib tssi1=$GET_11N_TSSI1
+	GET_11N_TSSI2=`cat $CONFIG_DIR/tssi_2`
+	$SET_WLAN set_mib tssi2=$GET_11N_TSSI2
+	
+	#GET_VALUE=`cat $CONFIG_DIR/11n_ther`
+	#$SET_WLAN set_mib ther=$GET_VALUE
+	
+	GET_VALUE=`cat $CONFIG_DIR/trswitch`
+	$SET_WLAN set_mib trswitch=$GET_VALUE
+
+	#GET_VALUE=`cat $CONFIG_DIR/11n_xcap`
+	#$SET_WLAN set_mib xcap=$GET_VALUE
+	
+	#GET_VALUE=`cat $CONFIG_DIR/rfe_type`
+	#$SET_WLAN set_mib rfe_type=$GET_VALUE
+	
+	#exit $ERROR_SUCCESS
+	
+#	iwpriv wlan0 efuse_set SD=3
+#	iwpriv wlan0 efuse_sync
+#	iwpriv wlan0 set_mib func_off=1
+
+fi # [ $IS_ROOT_WLAN = 1 ]
+	
+GET_VALUE=`cat $CONFIG_DIR/basic_rates`
+$SET_WLAN set_mib basicrates=$GET_VALUE
+
+GET_VALUE=`cat $CONFIG_DIR/supported_rate`
+$SET_WLAN set_mib oprates=$GET_VALUE
+	
+GET_RATE_ADAPTIVE_VALUE=`cat $CONFIG_DIR/rate_adaptive_enabled`
+if [ "$GET_RATE_ADAPTIVE_VALUE" = '0' ]; then
+	$SET_WLAN set_mib autorate=0
+	GET_FIX_RATE_VALUE=`cat $CONFIG_DIR/fix_rate`
+	$SET_WLAN set_mib fixrate=$GET_FIX_RATE_VALUE
+else
+	$SET_WLAN set_mib autorate=1
+fi
+
+GET_VALUE=`cat $CONFIG_DIR/rts_threshold`
+$SET_WLAN set_mib rtsthres=$GET_VALUE
+
+GET_VALUE=`cat $CONFIG_DIR/frag_threshold`
+$SET_WLAN set_mib fragthres=$GET_VALUE
+	
+GET_VALUE=`cat $CONFIG_DIR/inactivity_time`
+$SET_WLAN set_mib expired_time=$GET_VALUE
+GET_VALUE=`cat $ROOT_CONFIG_DIR/beacon_interval`
+$SET_WLAN set_mib bcnint=$GET_VALUE
+
+GET_VALUE=`cat $ROOT_CONFIG_DIR/dtim_period`
+$SET_WLAN set_mib dtimperiod=$GET_VALUE
+
+GET_VALUE=`cat $CONFIG_DIR/preamble_type`
+$SET_WLAN set_mib preamble=$GET_VALUE
+GET_VALUE=`cat $CONFIG_DIR/hidden_ssid`
+$SET_WLAN set_mib hiddenAP=$GET_VALUE
+
+GET_VALUE=`cat $CONFIG_DIR/supported_sta_num`
+$SET_WLAN set_mib stanum=$GET_VALUE
+
+GET_VALUE=`cat $CONFIG_DIR/ssid`
+$SET_WLAN set_mib ssid="$GET_VALUE"
+
+GET_VALUE=`cat $CONFIG_DIR/macac_enabled`
+$SET_WLAN set_mib aclmode=$GET_VALUE
+$SET_WLAN set_mib aclnum=0
+#ACL_NUM=`cat $CONFIG_DIR/macac_num`
+#_counter=1
+#while [ $_counter -le $ACL_NUM ]; do
+#	GET_VALUE=`cat $CONFIG_DIR/macac_addr$_counter`
+	#$SET_WLAN set_mib acladdr=$GET_VALUE
+#	echo "----add_acl_table is "$GET_VALUE
+	#$SET_WLAN add_acl_table $GET_VALUE
+#	_counter=$((_counter + 1))
+#done
+
+GET_WLAN_AUTH_TYPE=`cat $CONFIG_DIR/auth_type`
+AUTH_TYPE=$GET_WLAN_AUTH_TYPE
+GET_WLAN_ENCRYPT=`cat $CONFIG_DIR/encrypt`
+if [ "$GET_WLAN_AUTH_TYPE" = '1' ] && [ "$GET_WLAN_ENCRYPT" != '1' ]; then
+	# shared-key and not WEP enabled, force to open-system
+	AUTH_TYPE=0
+fi
+$SET_WLAN set_mib authtype=$AUTH_TYPE
+if [ "$GET_WLAN_ENCRYPT" = '0' ]; then
+	$SET_WLAN set_mib encmode=0
+elif [ "$GET_WLAN_ENCRYPT" = '1' ]; then
+	### WEP mode ##
+	GET_WEP=`cat $CONFIG_DIR/wep`
+	GET_WEP_KEY_TYPE=`cat $CONFIG_DIR/wep_key_type`
+	GET_WEP_KEY_ID=`cat $CONFIG_DIR/wep_default_key`
+	
+	if [ "$GET_WEP" = '1' ]; then
+		if [ "$GET_WEP_KEY_TYPE" = '0' ]; then
+			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_64_asc`
+			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_64_asc`
+			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_64_asc`
+			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_64_asc`
+		else
+			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_64_hex`
+			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_64_hex`
+			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_64_hex`
+			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_64_hex`
+		fi
+	
+		$SET_WLAN set_mib encmode=1
+		$SET_WLAN set_mib wepkey1=$GET_WEP_KEY_1
+		$SET_WLAN set_mib wepkey2=$GET_WEP_KEY_2
+		$SET_WLAN set_mib wepkey3=$GET_WEP_KEY_3
+		$SET_WLAN set_mib wepkey4=$GET_WEP_KEY_4
+		$SET_WLAN set_mib wepdkeyid=$GET_WEP_KEY_ID
+	else
+		if [ "$GET_WEP_KEY_TYPE" = '0' ]; then
+			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_128_asc`
+			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_128_asc`
+			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_128_asc`
+			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_128_asc`
+		else
+			GET_WEP_KEY_1=`cat $CONFIG_DIR/wepkey1_128_hex`
+			GET_WEP_KEY_2=`cat $CONFIG_DIR/wepkey2_128_hex`
+			GET_WEP_KEY_3=`cat $CONFIG_DIR/wepkey3_128_hex`
+			GET_WEP_KEY_4=`cat $CONFIG_DIR/wepkey4_128_hex`
+		fi
+		$SET_WLAN set_mib encmode=5
+		$SET_WLAN set_mib wepkey1=$GET_WEP_KEY_1
+		$SET_WLAN set_mib wepkey2=$GET_WEP_KEY_2
+		$SET_WLAN set_mib wepkey3=$GET_WEP_KEY_3
+		$SET_WLAN set_mib wepkey4=$GET_WEP_KEY_4
+		$SET_WLAN set_mib wepdkeyid=$GET_WEP_KEY_ID
+	fi
+else
+        ## WPA mode ##
+	$SET_WLAN set_mib encmode=2
+fi
+##$SET_WLAN set_mib wds_enable=0
+##$SET_WLAN set_mib wds_encrypt=0
+## Set 802.1x flag ##
+_ENABLE_1X=0
+if [ $GET_WLAN_ENCRYPT -lt 2 ]; then
+	GET_ENABLE_1X=`cat $CONFIG_DIR/enable_1x`
+	GET_MAC_AUTH_ENABLED=`cat $CONFIG_DIR/mac_auth_enabled`
+	if [ "$GET_ENABLE_1X" != 0 ] || [ "$GET_MAC_AUTH_ENABLED" != 0 ]; then
+		_ENABLE_1X=1
+	fi
+else
+	_ENABLE_1X=1
+fi
+$SET_WLAN set_mib 802_1x=$_ENABLE_1X
+	#set band
+GET_BAND=`cat $ROOT_CONFIG_DIR/band`
+GET_WIFI_SPECIFIC=`cat $ROOT_CONFIG_DIR/wifi_specific`
+if [ "$GET_VALUE_WLAN_MODE" != '1' ] && [ "$GET_WIFI_SPECIFIC" = 1 ] &&  [ "$GET_BAND" = '2' ] ; then
+	GET_BAND=3
+fi
+if [ "$GET_BAND" = '8' ]; then
+	GET_BAND=11
+	$SET_WLAN set_mib deny_legacy=3
+elif [ "$GET_BAND" = '2' ]; then
+	GET_BAND=3
+	$SET_WLAN set_mib deny_legacy=1
+elif [ "$GET_BAND" = '10' ]; then
+	GET_BAND=11
+	$SET_WLAN set_mib deny_legacy=1
+elif [ "$GET_BAND" = '64' ]; then
+	GET_BAND=76
+	$SET_WLAN set_mib deny_legacy=12
+elif [ "$GET_BAND" = '72' ]; then
+	GET_BAND=76
+	$SET_WLAN set_mib deny_legacy=4
+else
+	$SET_WLAN set_mib deny_legacy=0
+fi
+$SET_WLAN set_mib band=$GET_BAND
+
+
+echo "Set 11n parameter"  >> $LOG
+###Set 11n parameter
+	if [ $GET_BAND = 10 ] || [ $GET_BAND = 11 ] || [ $GET_BAND = 76 ]; then
+	if [ $IS_ROOT_WLAN = 1 ]; then
+		GET_CHANNEL_BONDING=`cat $CONFIG_DIR/channel_bonding`
+		$SET_WLAN set_mib use40M=$GET_CHANNEL_BONDING
+
+		GET_CONTROL_SIDEBAND=`cat $CONFIG_DIR/control_sideband`
+
+		if [ "$GET_CHANNEL_BONDING" = 0 ]; then
+			$SET_WLAN set_mib 2ndchoffset=0
+		else
+			if [ "$GET_CONTROL_SIDEBAND" = 0 ]; then
+				 $SET_WLAN set_mib 2ndchoffset=1
+			fi
+			if [ "$GET_CONTROL_SIDEBAND" = 1 ]; then
+				 $SET_WLAN set_mib 2ndchoffset=2
+			fi
+		fi
+	fi # [ $IS_ROOT_WLAN = 1 ]
+
+	GET_SHORT_GI=`cat $CONFIG_DIR/short_gi`
+	$SET_WLAN set_mib shortGI20M=$GET_SHORT_GI
+	$SET_WLAN set_mib shortGI40M=$GET_SHORT_GI
+
+	GET_AGGREGATION=`cat $CONFIG_DIR/aggregation`
+
+	if [ "$GET_AGGREGATION" = 0 ]; then
+		$SET_WLAN set_mib ampdu=$GET_AGGREGATION
+		$SET_WLAN set_mib amsdu=$GET_AGGREGATION
+	elif [ "$GET_AGGREGATION" = 1 ]; then
+		$SET_WLAN set_mib ampdu=1
+		$SET_WLAN set_mib amsdu=0
+	elif [ "$GET_AGGREGATION" = 2 ]; then
+		$SET_WLAN set_mib ampdu=0
+		$SET_WLAN set_mib amsdu=1
+	elif [ "$GET_AGGREGATION" = 3 ]; then
+		$SET_WLAN set_mib ampdu=1
+		$SET_WLAN set_mib amsdu=1
+	fi
+
+	GET_STBC_ENABLED=`cat $CONFIG_DIR/stbc_enabled`
+	$SET_WLAN set_mib stbc=$GET_STBC_ENABLED
+	GET_COEXIST_ENABLED=`cat $CONFIG_DIR/coexist_enabled`
+	$SET_WLAN set_mib coexist=$GET_COEXIST_ENABLED
+	fi # [ $GET_BAND = 10 ] || [ $GET_BAND = 11 ]
+##########
+
+#set nat2.5 disable when client and mac clone is set
+GET_MACCLONE_ENABLED=`cat $CONFIG_DIR/macclone_enable`
+if [ "$GET_MACCLONE_ENABLED" = '1' -a "$GET_VALUE_WLAN_MODE" = '1' ]; then
+	$SET_WLAN set_mib nat25_disable=1
+	$SET_WLAN set_mib macclone_enable=1
+else
+	$SET_WLAN set_mib nat25_disable=0
+	$SET_WLAN set_mib macclone_enable=0
+fi
+
+# set 11g protection mode
+GET_PROTECTION_DISABLED=`cat $CONFIG_DIR/protection_disabled`
+if  [ "$GET_PROTECTION_DISABLED" = '1' ] ;then
+	$SET_WLAN set_mib disable_protection=1
+else
+	$SET_WLAN set_mib disable_protection=0
+fi
+
+# for ap isolation
+GET_VALUE=`cat $CONFIG_DIR/group_id`
+$SET_WLAN set_mib groupID=$GET_VALUE
+
+# set block relay
+GET_VALUE=`cat $CONFIG_DIR/block_relay`
+$SET_WLAN set_mib block_relay=$GET_VALUE
+	
+	
+# set WiFi specific mode
+GET_VALUE=`cat $ROOT_CONFIG_DIR/wifi_specific`
+$SET_WLAN set_mib wifi_specific=$GET_VALUE
+
+# for WMM
+GET_VALUE=`cat $CONFIG_DIR/wmm_enabled`
+$SET_WLAN set_mib qos_enable=$GET_VALUE
+
+# for guest access
+GET_VALUE=`cat $CONFIG_DIR/guest_access`
+$SET_WLAN set_mib guest_access=$GET_VALUE
+
+
+
+# for country code
+#COUNTRY_CODE_ENABLE=`$SET_WLAN get_mib countrycode 2> /dev/null`
+if [ ! -z "$COUNTRY_CODE_ENABLE" ]; then
+GET_VALUE=`cat $ROOT_CONFIG_DIR/countrycode_enable`
+#	$SET_WLAN set_mib countrycode=$GET_VALUE
+
+GET_VALUE=`cat $ROOT_CONFIG_DIR/countrycode`
+#	$SET_WLAN set_mib countrystr=$GET_VALUE
+
+
+fi
+
+echo "wpa relative settings"  >> $LOG
+#
+# following settings is used when driver WPA module is included
+#
+
+GET_WPA_AUTH=`cat $CONFIG_DIR/wpa_auth`
+#if [ $GET_VALUE_WLAN_MODE != 1 ] && [ $GET_WLAN_ENCRYPT -ge 2 ]  && [ $GET_WLAN_ENCRYPT -lt 7 ] && [ $GET_WPA_AUTH = 2 ]; then
+if [ $GET_WLAN_ENCRYPT -ge 2 ]  && [ $GET_WLAN_ENCRYPT -lt 11 ]; then
+	if [ $GET_WPA_AUTH = 2 ]; then
+		if [ $GET_WLAN_ENCRYPT = 2 ]; then
+			ENABLE=1
+		elif [ $GET_WLAN_ENCRYPT = 4 ]; then
+			ENABLE=2
+		elif [ $GET_WLAN_ENCRYPT = 6 ]; then
+			ENABLE=3
+		elif [ $GET_WLAN_ENCRYPT = 8 ]; then
+			ENABLE=8
+		elif [ $GET_WLAN_ENCRYPT = 10 ]; then
+			ENABLE=10
+		else
+			echo "invalid ENCRYPT value!($GET_WLAN_ENCRYPT)" >> $LOG
+			exit $ERROR_INVALID_PARAMETERS;
+		fi
+		$SET_WLAN set_mib psk_enable=$ENABLE
+	else
+		$SET_WLAN set_mib psk_enable=0
+	fi
+
+	if [ $GET_WLAN_ENCRYPT = 2 ] || [ $GET_WLAN_ENCRYPT = 6 ]; then
+		GET_WPA_CIPHER_SUITE=`cat $CONFIG_DIR/wpa_cipher`
+		if [ $GET_WPA_CIPHER_SUITE = 1 ]; then
+			CIPHER=2
+		elif [ $GET_WPA_CIPHER_SUITE = 2 ]; then
+			CIPHER=8
+		elif [ $GET_WPA_CIPHER_SUITE = 3 ]; then
+			CIPHER=10
+		else
+			echo "invalid WPA_CIPHER_SUITE value!($GET_WPA_CIPHER_SUITE)" >> $LOG
+			exit $ERROR_INVALID_PARAMETERS;
+		fi
+	fi
+	$SET_WLAN set_mib wpa_cipher=$CIPHER
+
+	if [ $GET_WLAN_ENCRYPT = 4 ] || [ $GET_WLAN_ENCRYPT = 6 ] || [ $GET_WLAN_ENCRYPT = 8 ] || [ $GET_WLAN_ENCRYPT = 10 ]; then
+		GET_WPA2_CIPHER_SUITE=`cat $CONFIG_DIR/wpa2_cipher`
+		if [ $GET_WPA2_CIPHER_SUITE = 1 ]; then
+			CIPHER=2
+		elif [ $GET_WPA2_CIPHER_SUITE = 2 ]; then
+			CIPHER=8
+		elif [ $GET_WPA2_CIPHER_SUITE = 3 ]; then
+			CIPHER=10
+		else
+			echo "invalid WPA2_CIPHER_SUITE value!($GET_WPA2_CIPHER_SUITE)" >> $LOG
+			exit $ERROR_INVALID_PARAMETERS;
+		fi
+	fi
+	$SET_WLAN set_mib wpa2_cipher=$CIPHER
+
+	GET_WPA_PSK=`cat $CONFIG_DIR/wpa_psk`
+	$SET_WLAN set_mib passphrase="$GET_WPA_PSK"
+
+	
+	GET_WPA_GROUP_REKEY_TIME=`cat $CONFIG_DIR/gk_rekey`
+	$SET_WLAN set_mib gk_rekey=$GET_WPA_GROUP_REKEY_TIME
+fi
+# Set 11w parameter #
+#if [ $GET_WLAN_ENCRYPT = 4 ] || [ $GET_WLAN_ENCRYPT = 6 ]; then
+#	GET_WPA2_11W=`cat $CONFIG_DIR/wpa11w`
+#	GET_WPA2_SHA256=`cat $CONFIG_DIR/wpa2EnableSHA256`
+#	if [ $GET_WPA2_11W = 0 ]; then
+#		GET_WPA2_SHA256=0
+#	elif [ $GET_WPA2_11W = 1 ]; then
+#		if [ "$GET_WPA2_SHA256" != '0' ] && [ "$GET_WPA2_SHA256" != '1' ]; then
+#			GET_WPA2_SHA256=0
+#		fi
+#	elif [ $GET_WPA2_11W = 2 ]; then
+#		GET_WPA2_SHA256=1
+#	else
+#		echo "invalid GET_WPA2_11W value!($GET_WPA2_11W)";
+#		exit $ERROR_INVALID_PARAMETERS;
+#	fi
+#else
+#	GET_WPA2_11W=0
+#	GET_WPA2_SHA256=0
+#fi
+
+if [ $GET_WLAN_ENCRYPT = 8 ] || [ $GET_WLAN_ENCRYPT = 10 ]; then
+	GET_WPA2_11W=`cat $CONFIG_DIR/wpa11w`
+	GET_WPA2_SHA256=`cat $CONFIG_DIR/wpa2EnableSHA256`
+	$SET_WLAN set_mib dot11IEEE80211W=$GET_WPA2_11W
+	$SET_WLAN set_mib enableSHA256=$GET_WPA2_SHA256
+else
+	echo "Only WPA3 need PMF" >> $LOG
+	$SET_WLAN set_mib dot11IEEE80211W=0
+	$SET_WLAN set_mib enableSHA256=0
+fi
+
+##########