zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/app/wpa_supplicant-2.6/src/common/cli.h b/ap/app/wpa_supplicant-2.6/src/common/cli.h
new file mode 100755
index 0000000..41ef329
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/cli.h
@@ -0,0 +1,47 @@
+/*
+ * Common hostapd/wpa_supplicant command line interface functionality
+ * Copyright (c) 2004-2016, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef CLI_H
+#define CLI_H
+
+#include "utils/list.h"
+
+extern const char *const cli_license;
+extern const char *const cli_full_license;
+
+struct cli_txt_entry {
+ struct dl_list list;
+ char *txt;
+};
+
+void cli_txt_list_free(struct cli_txt_entry *e);
+void cli_txt_list_flush(struct dl_list *list);
+
+struct cli_txt_entry *
+cli_txt_list_get(struct dl_list *txt_list, const char *txt);
+
+void cli_txt_list_del(struct dl_list *txt_list, const char *txt);
+void cli_txt_list_del_addr(struct dl_list *txt_list, const char *txt);
+void cli_txt_list_del_word(struct dl_list *txt_list, const char *txt,
+ int separator);
+
+int cli_txt_list_add(struct dl_list *txt_list, const char *txt);
+int cli_txt_list_add_addr(struct dl_list *txt_list, const char *txt);
+int cli_txt_list_add_word(struct dl_list *txt_list, const char *txt,
+ int separator);
+
+char ** cli_txt_list_array(struct dl_list *txt_list);
+
+int get_cmd_arg_num(const char *str, int pos);
+int write_cmd(char *buf, size_t buflen, const char *cmd, int argc,
+ char *argv[]);
+
+#define max_args 10
+int tokenize_cmd(char *cmd, char *argv[]);
+
+#endif /* CLI_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/ctrl_iface_common.h b/ap/app/wpa_supplicant-2.6/src/common/ctrl_iface_common.h
new file mode 100755
index 0000000..0b6e3e7
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/ctrl_iface_common.h
@@ -0,0 +1,38 @@
+/*
+ * Common hostapd/wpa_supplicant ctrl iface code.
+ * Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2015, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+#ifndef CONTROL_IFACE_COMMON_H
+#define CONTROL_IFACE_COMMON_H
+
+#include "utils/list.h"
+
+/**
+ * struct wpa_ctrl_dst - Data structure of control interface monitors
+ *
+ * This structure is used to store information about registered control
+ * interface monitors into struct wpa_supplicant.
+ */
+struct wpa_ctrl_dst {
+ struct dl_list list;
+ struct sockaddr_storage addr;
+ socklen_t addrlen;
+ int debug_level;
+ int errors;
+};
+
+void sockaddr_print(int level, const char *msg, struct sockaddr_storage *sock,
+ socklen_t socklen);
+
+int ctrl_iface_attach(struct dl_list *ctrl_dst, struct sockaddr_storage *from,
+ socklen_t fromlen);
+int ctrl_iface_detach(struct dl_list *ctrl_dst, struct sockaddr_storage *from,
+ socklen_t fromlen);
+int ctrl_iface_level(struct dl_list *ctrl_dst, struct sockaddr_storage *from,
+ socklen_t fromlen, const char *level);
+
+#endif /* CONTROL_IFACE_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/defs.h b/ap/app/wpa_supplicant-2.6/src/common/defs.h
new file mode 100755
index 0000000..4f56794
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/defs.h
@@ -0,0 +1,344 @@
+/*
+ * WPA Supplicant - Common definitions
+ * Copyright (c) 2004-2015, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef DEFS_H
+#define DEFS_H
+
+#ifdef FALSE
+#undef FALSE
+#endif
+#ifdef TRUE
+#undef TRUE
+#endif
+typedef enum { FALSE = 0, TRUE = 1 } Boolean;
+
+
+#define WPA_CIPHER_NONE BIT(0)
+#define WPA_CIPHER_WEP40 BIT(1)
+#define WPA_CIPHER_WEP104 BIT(2)
+#define WPA_CIPHER_TKIP BIT(3)
+#define WPA_CIPHER_CCMP BIT(4)
+#define WPA_CIPHER_AES_128_CMAC BIT(5)
+#define WPA_CIPHER_GCMP BIT(6)
+#define WPA_CIPHER_SMS4 BIT(7)
+#define WPA_CIPHER_GCMP_256 BIT(8)
+#define WPA_CIPHER_CCMP_256 BIT(9)
+#define WPA_CIPHER_BIP_GMAC_128 BIT(11)
+#define WPA_CIPHER_BIP_GMAC_256 BIT(12)
+#define WPA_CIPHER_BIP_CMAC_256 BIT(13)
+#define WPA_CIPHER_GTK_NOT_USED BIT(14)
+
+#define WPA_KEY_MGMT_IEEE8021X BIT(0)
+#define WPA_KEY_MGMT_PSK BIT(1)
+#define WPA_KEY_MGMT_NONE BIT(2)
+#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
+#define WPA_KEY_MGMT_WPA_NONE BIT(4)
+#define WPA_KEY_MGMT_FT_IEEE8021X BIT(5)
+#define WPA_KEY_MGMT_FT_PSK BIT(6)
+#define WPA_KEY_MGMT_IEEE8021X_SHA256 BIT(7)
+#define WPA_KEY_MGMT_PSK_SHA256 BIT(8)
+#define WPA_KEY_MGMT_WPS BIT(9)
+#define WPA_KEY_MGMT_SAE BIT(10)
+#define WPA_KEY_MGMT_FT_SAE BIT(11)
+#define WPA_KEY_MGMT_WAPI_PSK BIT(12)
+#define WPA_KEY_MGMT_WAPI_CERT BIT(13)
+#define WPA_KEY_MGMT_CCKM BIT(14)
+#define WPA_KEY_MGMT_OSEN BIT(15)
+#define WPA_KEY_MGMT_IEEE8021X_SUITE_B BIT(16)
+#define WPA_KEY_MGMT_IEEE8021X_SUITE_B_192 BIT(17)
+
+static inline int wpa_key_mgmt_wpa_ieee8021x(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_IEEE8021X |
+ WPA_KEY_MGMT_FT_IEEE8021X |
+ WPA_KEY_MGMT_CCKM |
+ WPA_KEY_MGMT_OSEN |
+ WPA_KEY_MGMT_IEEE8021X_SHA256 |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B_192));
+}
+
+static inline int wpa_key_mgmt_wpa_psk(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_PSK |
+ WPA_KEY_MGMT_FT_PSK |
+ WPA_KEY_MGMT_PSK_SHA256 |
+ WPA_KEY_MGMT_SAE |
+ WPA_KEY_MGMT_FT_SAE));
+}
+
+static inline int wpa_key_mgmt_ft(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_FT_PSK |
+ WPA_KEY_MGMT_FT_IEEE8021X |
+ WPA_KEY_MGMT_FT_SAE));
+}
+
+static inline int wpa_key_mgmt_sae(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_SAE |
+ WPA_KEY_MGMT_FT_SAE));
+}
+
+static inline int wpa_key_mgmt_sha256(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_PSK_SHA256 |
+ WPA_KEY_MGMT_IEEE8021X_SHA256 |
+ WPA_KEY_MGMT_OSEN |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B));
+}
+
+static inline int wpa_key_mgmt_sha384(int akm)
+{
+ return !!(akm & WPA_KEY_MGMT_IEEE8021X_SUITE_B_192);
+}
+
+static inline int wpa_key_mgmt_suite_b(int akm)
+{
+ return !!(akm & (WPA_KEY_MGMT_IEEE8021X_SUITE_B |
+ WPA_KEY_MGMT_IEEE8021X_SUITE_B_192));
+}
+
+static inline int wpa_key_mgmt_wpa(int akm)
+{
+ return wpa_key_mgmt_wpa_ieee8021x(akm) ||
+ wpa_key_mgmt_wpa_psk(akm) ||
+ wpa_key_mgmt_sae(akm);
+}
+
+static inline int wpa_key_mgmt_wpa_any(int akm)
+{
+ return wpa_key_mgmt_wpa(akm) || (akm & WPA_KEY_MGMT_WPA_NONE);
+}
+
+static inline int wpa_key_mgmt_cckm(int akm)
+{
+ return akm == WPA_KEY_MGMT_CCKM;
+}
+
+
+#define WPA_PROTO_WPA BIT(0)
+#define WPA_PROTO_RSN BIT(1)
+#define WPA_PROTO_WAPI BIT(2)
+#define WPA_PROTO_OSEN BIT(3)
+
+#define WPA_AUTH_ALG_OPEN BIT(0)
+#define WPA_AUTH_ALG_SHARED BIT(1)
+#define WPA_AUTH_ALG_LEAP BIT(2)
+#define WPA_AUTH_ALG_FT BIT(3)
+#define WPA_AUTH_ALG_SAE BIT(4)
+
+
+enum wpa_alg {
+ WPA_ALG_NONE,
+ WPA_ALG_WEP,
+ WPA_ALG_TKIP,
+ WPA_ALG_CCMP,
+ WPA_ALG_IGTK,
+ WPA_ALG_PMK,
+ WPA_ALG_GCMP,
+ WPA_ALG_SMS4,
+ WPA_ALG_KRK,
+ WPA_ALG_GCMP_256,
+ WPA_ALG_CCMP_256,
+ WPA_ALG_BIP_GMAC_128,
+ WPA_ALG_BIP_GMAC_256,
+ WPA_ALG_BIP_CMAC_256
+};
+
+/**
+ * enum wpa_states - wpa_supplicant state
+ *
+ * These enumeration values are used to indicate the current wpa_supplicant
+ * state (wpa_s->wpa_state). The current state can be retrieved with
+ * wpa_supplicant_get_state() function and the state can be changed by calling
+ * wpa_supplicant_set_state(). In WPA state machine (wpa.c and preauth.c), the
+ * wrapper functions wpa_sm_get_state() and wpa_sm_set_state() should be used
+ * to access the state variable.
+ */
+enum wpa_states {
+ /**
+ * WPA_DISCONNECTED - Disconnected state
+ *
+ * This state indicates that client is not associated, but is likely to
+ * start looking for an access point. This state is entered when a
+ * connection is lost.
+ */
+ WPA_DISCONNECTED,
+
+ /**
+ * WPA_INTERFACE_DISABLED - Interface disabled
+ *
+ * This state is entered if the network interface is disabled, e.g.,
+ * due to rfkill. wpa_supplicant refuses any new operations that would
+ * use the radio until the interface has been enabled.
+ */
+ WPA_INTERFACE_DISABLED,
+
+ /**
+ * WPA_INACTIVE - Inactive state (wpa_supplicant disabled)
+ *
+ * This state is entered if there are no enabled networks in the
+ * configuration. wpa_supplicant is not trying to associate with a new
+ * network and external interaction (e.g., ctrl_iface call to add or
+ * enable a network) is needed to start association.
+ */
+ WPA_INACTIVE,
+
+ /**
+ * WPA_SCANNING - Scanning for a network
+ *
+ * This state is entered when wpa_supplicant starts scanning for a
+ * network.
+ */
+ WPA_SCANNING,
+
+ /**
+ * WPA_AUTHENTICATING - Trying to authenticate with a BSS/SSID
+ *
+ * This state is entered when wpa_supplicant has found a suitable BSS
+ * to authenticate with and the driver is configured to try to
+ * authenticate with this BSS. This state is used only with drivers
+ * that use wpa_supplicant as the SME.
+ */
+ WPA_AUTHENTICATING,
+
+ /**
+ * WPA_ASSOCIATING - Trying to associate with a BSS/SSID
+ *
+ * This state is entered when wpa_supplicant has found a suitable BSS
+ * to associate with and the driver is configured to try to associate
+ * with this BSS in ap_scan=1 mode. When using ap_scan=2 mode, this
+ * state is entered when the driver is configured to try to associate
+ * with a network using the configured SSID and security policy.
+ */
+ WPA_ASSOCIATING,
+
+ /**
+ * WPA_ASSOCIATED - Association completed
+ *
+ * This state is entered when the driver reports that association has
+ * been successfully completed with an AP. If IEEE 802.1X is used
+ * (with or without WPA/WPA2), wpa_supplicant remains in this state
+ * until the IEEE 802.1X/EAPOL authentication has been completed.
+ */
+ WPA_ASSOCIATED,
+
+ /**
+ * WPA_4WAY_HANDSHAKE - WPA 4-Way Key Handshake in progress
+ *
+ * This state is entered when WPA/WPA2 4-Way Handshake is started. In
+ * case of WPA-PSK, this happens when receiving the first EAPOL-Key
+ * frame after association. In case of WPA-EAP, this state is entered
+ * when the IEEE 802.1X/EAPOL authentication has been completed.
+ */
+ WPA_4WAY_HANDSHAKE,
+
+ /**
+ * WPA_GROUP_HANDSHAKE - WPA Group Key Handshake in progress
+ *
+ * This state is entered when 4-Way Key Handshake has been completed
+ * (i.e., when the supplicant sends out message 4/4) and when Group
+ * Key rekeying is started by the AP (i.e., when supplicant receives
+ * message 1/2).
+ */
+ WPA_GROUP_HANDSHAKE,
+
+ /**
+ * WPA_COMPLETED - All authentication completed
+ *
+ * This state is entered when the full authentication process is
+ * completed. In case of WPA2, this happens when the 4-Way Handshake is
+ * successfully completed. With WPA, this state is entered after the
+ * Group Key Handshake; with IEEE 802.1X (non-WPA) connection is
+ * completed after dynamic keys are received (or if not used, after
+ * the EAP authentication has been completed). With static WEP keys and
+ * plaintext connections, this state is entered when an association
+ * has been completed.
+ *
+ * This state indicates that the supplicant has completed its
+ * processing for the association phase and that data connection is
+ * fully configured.
+ */
+ WPA_COMPLETED
+};
+
+#define MLME_SETPROTECTION_PROTECT_TYPE_NONE 0
+#define MLME_SETPROTECTION_PROTECT_TYPE_RX 1
+#define MLME_SETPROTECTION_PROTECT_TYPE_TX 2
+#define MLME_SETPROTECTION_PROTECT_TYPE_RX_TX 3
+
+#define MLME_SETPROTECTION_KEY_TYPE_GROUP 0
+#define MLME_SETPROTECTION_KEY_TYPE_PAIRWISE 1
+
+
+/**
+ * enum mfp_options - Management frame protection (IEEE 802.11w) options
+ */
+enum mfp_options {
+ NO_MGMT_FRAME_PROTECTION = 0,
+ MGMT_FRAME_PROTECTION_OPTIONAL = 1,
+ MGMT_FRAME_PROTECTION_REQUIRED = 2,
+};
+#define MGMT_FRAME_PROTECTION_DEFAULT 3
+
+/**
+ * enum hostapd_hw_mode - Hardware mode
+ */
+enum hostapd_hw_mode {
+ HOSTAPD_MODE_IEEE80211B,
+ HOSTAPD_MODE_IEEE80211G,
+ HOSTAPD_MODE_IEEE80211A,
+ HOSTAPD_MODE_IEEE80211AD,
+ HOSTAPD_MODE_IEEE80211ANY,
+ NUM_HOSTAPD_MODES
+};
+
+/**
+ * enum wpa_ctrl_req_type - Control interface request types
+ */
+enum wpa_ctrl_req_type {
+ WPA_CTRL_REQ_UNKNOWN,
+ WPA_CTRL_REQ_EAP_IDENTITY,
+ WPA_CTRL_REQ_EAP_PASSWORD,
+ WPA_CTRL_REQ_EAP_NEW_PASSWORD,
+ WPA_CTRL_REQ_EAP_PIN,
+ WPA_CTRL_REQ_EAP_OTP,
+ WPA_CTRL_REQ_EAP_PASSPHRASE,
+ WPA_CTRL_REQ_SIM,
+ WPA_CTRL_REQ_PSK_PASSPHRASE,
+ WPA_CTRL_REQ_EXT_CERT_CHECK,
+ NUM_WPA_CTRL_REQS
+};
+
+/* Maximum number of EAP methods to store for EAP server user information */
+#define EAP_MAX_METHODS 8
+
+enum mesh_plink_state {
+ PLINK_IDLE = 1,
+ PLINK_OPN_SNT,
+ PLINK_OPN_RCVD,
+ PLINK_CNF_RCVD,
+ PLINK_ESTAB,
+ PLINK_HOLDING,
+ PLINK_BLOCKED, /* not defined in the IEEE 802.11 standard */
+};
+
+enum set_band {
+ WPA_SETBAND_AUTO,
+ WPA_SETBAND_5G,
+ WPA_SETBAND_2G
+};
+
+enum wpa_radio_work_band {
+ BAND_2_4_GHZ = BIT(0),
+ BAND_5_GHZ = BIT(1),
+ BAND_60_GHZ = BIT(2),
+};
+
+#endif /* DEFS_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/eapol_common.h b/ap/app/wpa_supplicant-2.6/src/common/eapol_common.h
new file mode 100755
index 0000000..d773348
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/eapol_common.h
@@ -0,0 +1,92 @@
+/*
+ * EAPOL definitions shared between hostapd and wpa_supplicant
+ * Copyright (c) 2002-2007, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef EAPOL_COMMON_H
+#define EAPOL_COMMON_H
+
+/* IEEE Std 802.1X-2004 */
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+struct ieee802_1x_hdr {
+ u8 version;
+ u8 type;
+ be16 length;
+ /* followed by length octets of data */
+} STRUCT_PACKED;
+
+struct ieee8023_hdr {
+ u8 dest[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ be16 ethertype;
+} STRUCT_PACKED;
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+#ifdef CONFIG_MACSEC
+#define EAPOL_VERSION 3
+#else /* CONFIG_MACSEC */
+#define EAPOL_VERSION 2
+#endif /* CONFIG_MACSEC */
+
+enum { IEEE802_1X_TYPE_EAP_PACKET = 0,
+ IEEE802_1X_TYPE_EAPOL_START = 1,
+ IEEE802_1X_TYPE_EAPOL_LOGOFF = 2,
+ IEEE802_1X_TYPE_EAPOL_KEY = 3,
+ IEEE802_1X_TYPE_EAPOL_ENCAPSULATED_ASF_ALERT = 4,
+ IEEE802_1X_TYPE_EAPOL_MKA = 5,
+};
+
+enum { EAPOL_KEY_TYPE_RC4 = 1, EAPOL_KEY_TYPE_RSN = 2,
+ EAPOL_KEY_TYPE_WPA = 254 };
+
+
+#define IEEE8021X_REPLAY_COUNTER_LEN 8
+#define IEEE8021X_KEY_SIGN_LEN 16
+#define IEEE8021X_KEY_IV_LEN 16
+
+#define IEEE8021X_KEY_INDEX_FLAG 0x80
+#define IEEE8021X_KEY_INDEX_MASK 0x03
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+struct ieee802_1x_eapol_key {
+ u8 type;
+ /* Note: key_length is unaligned */
+ u8 key_length[2];
+ /* does not repeat within the life of the keying material used to
+ * encrypt the Key field; 64-bit NTP timestamp MAY be used here */
+ u8 replay_counter[IEEE8021X_REPLAY_COUNTER_LEN];
+ u8 key_iv[IEEE8021X_KEY_IV_LEN]; /* cryptographically random number */
+ u8 key_index; /* key flag in the most significant bit:
+ * 0 = broadcast (default key),
+ * 1 = unicast (key mapping key); key index is in the
+ * 7 least significant bits */
+ /* HMAC-MD5 message integrity check computed with MS-MPPE-Send-Key as
+ * the key */
+ u8 key_signature[IEEE8021X_KEY_SIGN_LEN];
+
+ /* followed by key: if packet body length = 44 + key length, then the
+ * key field (of key_length bytes) contains the key in encrypted form;
+ * if packet body length = 44, key field is absent and key_length
+ * represents the number of least significant octets from
+ * MS-MPPE-Send-Key attribute to be used as the keying material;
+ * RC4 key used in encryption = Key-IV + MS-MPPE-Recv-Key */
+} STRUCT_PACKED;
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+#endif /* EAPOL_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/gas.h b/ap/app/wpa_supplicant-2.6/src/common/gas.h
new file mode 100755
index 0000000..306adc5
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/gas.h
@@ -0,0 +1,37 @@
+/*
+ * Generic advertisement service (GAS) (IEEE 802.11u)
+ * Copyright (c) 2009, Atheros Communications
+ * Copyright (c) 2011-2012, Qualcomm Atheros
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef GAS_H
+#define GAS_H
+
+struct wpabuf * gas_build_initial_req(u8 dialog_token, size_t size);
+struct wpabuf * gas_build_comeback_req(u8 dialog_token);
+struct wpabuf * gas_build_initial_resp(u8 dialog_token, u16 status_code,
+ u16 comeback_delay, size_t size);
+struct wpabuf * gas_anqp_build_initial_req(u8 dialog_token, size_t size);
+struct wpabuf * gas_anqp_build_initial_resp(u8 dialog_token, u16 status_code,
+ u16 comeback_delay, size_t size);
+struct wpabuf * gas_anqp_build_initial_resp_buf(u8 dialog_token,
+ u16 status_code,
+ u16 comeback_delay,
+ struct wpabuf *payload);
+struct wpabuf * gas_anqp_build_comeback_resp(u8 dialog_token, u16 status_code,
+ u8 frag_id, u8 more,
+ u16 comeback_delay, size_t size);
+struct wpabuf * gas_anqp_build_comeback_resp_buf(u8 dialog_token,
+ u16 status_code,
+ u8 frag_id, u8 more,
+ u16 comeback_delay,
+ struct wpabuf *payload);
+void gas_anqp_set_len(struct wpabuf *buf);
+
+u8 * gas_anqp_add_element(struct wpabuf *buf, u16 info_id);
+void gas_anqp_set_element_len(struct wpabuf *buf, u8 *len_pos);
+
+#endif /* GAS_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/hw_features_common.h b/ap/app/wpa_supplicant-2.6/src/common/hw_features_common.h
new file mode 100755
index 0000000..7360b4e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/hw_features_common.h
@@ -0,0 +1,39 @@
+/*
+ * Common hostapd/wpa_supplicant HW features
+ * Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2015, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef HW_FEATURES_COMMON_H
+#define HW_FEATURES_COMMON_H
+
+#include "drivers/driver.h"
+
+struct hostapd_channel_data * hw_get_channel_chan(struct hostapd_hw_modes *mode,
+ int chan, int *freq);
+struct hostapd_channel_data * hw_get_channel_freq(struct hostapd_hw_modes *mode,
+ int freq, int *chan);
+
+int hw_get_freq(struct hostapd_hw_modes *mode, int chan);
+int hw_get_chan(struct hostapd_hw_modes *mode, int freq);
+
+int allowed_ht40_channel_pair(struct hostapd_hw_modes *mode, int pri_chan,
+ int sec_chan);
+void get_pri_sec_chan(struct wpa_scan_res *bss, int *pri_chan, int *sec_chan);
+int check_40mhz_5g(struct hostapd_hw_modes *mode,
+ struct wpa_scan_results *scan_res, int pri_chan,
+ int sec_chan);
+int check_40mhz_2g4(struct hostapd_hw_modes *mode,
+ struct wpa_scan_results *scan_res, int pri_chan,
+ int sec_chan);
+int hostapd_set_freq_params(struct hostapd_freq_params *data,
+ enum hostapd_hw_mode mode,
+ int freq, int channel, int ht_enabled,
+ int vht_enabled, int sec_channel_offset,
+ int vht_oper_chwidth, int center_segment0,
+ int center_segment1, u32 vht_caps);
+
+#endif /* HW_FEATURES_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/ieee802_11_common.h b/ap/app/wpa_supplicant-2.6/src/common/ieee802_11_common.h
new file mode 100755
index 0000000..42f3909
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/ieee802_11_common.h
@@ -0,0 +1,156 @@
+/*
+ * IEEE 802.11 Common routines
+ * Copyright (c) 2002-2012, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef IEEE802_11_COMMON_H
+#define IEEE802_11_COMMON_H
+
+#include "defs.h"
+
+#define MAX_NOF_MB_IES_SUPPORTED 5
+
+struct mb_ies_info {
+ struct {
+ const u8 *ie;
+ u8 ie_len;
+ } ies[MAX_NOF_MB_IES_SUPPORTED];
+ u8 nof_ies;
+};
+
+/* Parsed Information Elements */
+struct ieee802_11_elems {
+ const u8 *ssid;
+ const u8 *supp_rates;
+ const u8 *ds_params;
+ const u8 *challenge;
+ const u8 *erp_info;
+ const u8 *ext_supp_rates;
+ const u8 *wpa_ie;
+ const u8 *rsn_ie;
+ const u8 *wmm; /* WMM Information or Parameter Element */
+ const u8 *wmm_tspec;
+ const u8 *wps_ie;
+ const u8 *supp_channels;
+ const u8 *mdie;
+ const u8 *ftie;
+ const u8 *timeout_int;
+ const u8 *ht_capabilities;
+ const u8 *ht_operation;
+ const u8 *mesh_config;
+ const u8 *mesh_id;
+ const u8 *peer_mgmt;
+ const u8 *vht_capabilities;
+ const u8 *vht_operation;
+ const u8 *vht_opmode_notif;
+ const u8 *vendor_ht_cap;
+ const u8 *vendor_vht;
+ const u8 *p2p;
+ const u8 *wfd;
+ const u8 *link_id;
+ const u8 *interworking;
+ const u8 *qos_map_set;
+ const u8 *hs20;
+ const u8 *ext_capab;
+ const u8 *bss_max_idle_period;
+ const u8 *ssid_list;
+ const u8 *osen;
+ const u8 *mbo;
+ const u8 *ampe;
+ const u8 *mic;
+ const u8 *pref_freq_list;
+ const u8 *supp_op_classes;
+ const u8 *rrm_enabled;
+
+ u8 ssid_len;
+ u8 supp_rates_len;
+ u8 challenge_len;
+ u8 ext_supp_rates_len;
+ u8 wpa_ie_len;
+ u8 rsn_ie_len;
+ u8 wmm_len; /* 7 = WMM Information; 24 = WMM Parameter */
+ u8 wmm_tspec_len;
+ u8 wps_ie_len;
+ u8 supp_channels_len;
+ u8 mdie_len;
+ u8 ftie_len;
+ u8 mesh_config_len;
+ u8 mesh_id_len;
+ u8 peer_mgmt_len;
+ u8 vendor_ht_cap_len;
+ u8 vendor_vht_len;
+ u8 p2p_len;
+ u8 wfd_len;
+ u8 interworking_len;
+ u8 qos_map_set_len;
+ u8 hs20_len;
+ u8 ext_capab_len;
+ u8 ssid_list_len;
+ u8 osen_len;
+ u8 mbo_len;
+ u8 ampe_len;
+ u8 mic_len;
+ u8 pref_freq_list_len;
+ u8 supp_op_classes_len;
+ u8 rrm_enabled_len;
+
+ struct mb_ies_info mb_ies;
+};
+
+typedef enum { ParseOK = 0, ParseUnknown = 1, ParseFailed = -1 } ParseRes;
+
+ParseRes ieee802_11_parse_elems(const u8 *start, size_t len,
+ struct ieee802_11_elems *elems,
+ int show_errors);
+int ieee802_11_ie_count(const u8 *ies, size_t ies_len);
+struct wpabuf * ieee802_11_vendor_ie_concat(const u8 *ies, size_t ies_len,
+ u32 oui_type);
+struct ieee80211_hdr;
+const u8 * get_hdr_bssid(const struct ieee80211_hdr *hdr, size_t len);
+
+struct hostapd_wmm_ac_params {
+ int cwmin;
+ int cwmax;
+ int aifs;
+ int txop_limit; /* in units of 32us */
+ int admission_control_mandatory;
+};
+
+int hostapd_config_wmm_ac(struct hostapd_wmm_ac_params wmm_ac_params[],
+ const char *name, const char *val);
+enum hostapd_hw_mode ieee80211_freq_to_chan(int freq, u8 *channel);
+int ieee80211_chan_to_freq(const char *country, u8 op_class, u8 chan);
+enum hostapd_hw_mode ieee80211_freq_to_channel_ext(unsigned int freq,
+ int sec_channel, int vht,
+ u8 *op_class, u8 *channel);
+int ieee80211_is_dfs(int freq);
+enum phy_type ieee80211_get_phy_type(int freq, int ht, int vht);
+
+int supp_rates_11b_only(struct ieee802_11_elems *elems);
+int mb_ies_info_by_ies(struct mb_ies_info *info, const u8 *ies_buf,
+ size_t ies_len);
+struct wpabuf * mb_ies_by_info(struct mb_ies_info *info);
+
+const char * fc2str(u16 fc);
+
+struct oper_class_map {
+ enum hostapd_hw_mode mode;
+ u8 op_class;
+ u8 min_chan;
+ u8 max_chan;
+ u8 inc;
+ enum { BW20, BW40PLUS, BW40MINUS, BW80, BW2160, BW160, BW80P80 } bw;
+ enum { P2P_SUPP, NO_P2P_SUPP } p2p;
+};
+
+extern const struct oper_class_map global_op_class[];
+extern size_t global_op_class_size;
+
+const u8 * get_ie(const u8 *ies, size_t len, u8 eid);
+
+size_t mbo_add_ie(u8 *buf, size_t len, const u8 *attr, size_t attr_len);
+
+#endif /* IEEE802_11_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/ieee802_11_defs.h b/ap/app/wpa_supplicant-2.6/src/common/ieee802_11_defs.h
new file mode 100755
index 0000000..d453aec
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/ieee802_11_defs.h
@@ -0,0 +1,1663 @@
+/*
+ * IEEE 802.11 Frame type definitions
+ * Copyright (c) 2002-2015, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2007-2008 Intel Corporation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef IEEE802_11_DEFS_H
+#define IEEE802_11_DEFS_H
+
+#include <utils/common.h>
+
+/* IEEE 802.11 defines */
+
+#define WLAN_FC_PVER 0x0003
+#define WLAN_FC_TODS 0x0100
+#define WLAN_FC_FROMDS 0x0200
+#define WLAN_FC_MOREFRAG 0x0400
+#define WLAN_FC_RETRY 0x0800
+#define WLAN_FC_PWRMGT 0x1000
+#define WLAN_FC_MOREDATA 0x2000
+#define WLAN_FC_ISWEP 0x4000
+#define WLAN_FC_ORDER 0x8000
+
+#define WLAN_FC_GET_TYPE(fc) (((fc) & 0x000c) >> 2)
+#define WLAN_FC_GET_STYPE(fc) (((fc) & 0x00f0) >> 4)
+
+#define WLAN_INVALID_MGMT_SEQ 0xFFFF
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & (BIT(3) | BIT(2) | BIT(1) | BIT(0)))
+#define WLAN_GET_SEQ_SEQ(seq) \
+ (((seq) & (~(BIT(3) | BIT(2) | BIT(1) | BIT(0)))) >> 4)
+
+#define WLAN_FC_TYPE_MGMT 0
+#define WLAN_FC_TYPE_CTRL 1
+#define WLAN_FC_TYPE_DATA 2
+
+/* management */
+#define WLAN_FC_STYPE_ASSOC_REQ 0
+#define WLAN_FC_STYPE_ASSOC_RESP 1
+#define WLAN_FC_STYPE_REASSOC_REQ 2
+#define WLAN_FC_STYPE_REASSOC_RESP 3
+#define WLAN_FC_STYPE_PROBE_REQ 4
+#define WLAN_FC_STYPE_PROBE_RESP 5
+#define WLAN_FC_STYPE_BEACON 8
+#define WLAN_FC_STYPE_ATIM 9
+#define WLAN_FC_STYPE_DISASSOC 10
+#define WLAN_FC_STYPE_AUTH 11
+#define WLAN_FC_STYPE_DEAUTH 12
+#define WLAN_FC_STYPE_ACTION 13
+
+/* control */
+#define WLAN_FC_STYPE_PSPOLL 10
+#define WLAN_FC_STYPE_RTS 11
+#define WLAN_FC_STYPE_CTS 12
+#define WLAN_FC_STYPE_ACK 13
+#define WLAN_FC_STYPE_CFEND 14
+#define WLAN_FC_STYPE_CFENDACK 15
+
+/* data */
+#define WLAN_FC_STYPE_DATA 0
+#define WLAN_FC_STYPE_DATA_CFACK 1
+#define WLAN_FC_STYPE_DATA_CFPOLL 2
+#define WLAN_FC_STYPE_DATA_CFACKPOLL 3
+#define WLAN_FC_STYPE_NULLFUNC 4
+#define WLAN_FC_STYPE_CFACK 5
+#define WLAN_FC_STYPE_CFPOLL 6
+#define WLAN_FC_STYPE_CFACKPOLL 7
+#define WLAN_FC_STYPE_QOS_DATA 8
+#define WLAN_FC_STYPE_QOS_DATA_CFACK 9
+#define WLAN_FC_STYPE_QOS_DATA_CFPOLL 10
+#define WLAN_FC_STYPE_QOS_DATA_CFACKPOLL 11
+#define WLAN_FC_STYPE_QOS_NULL 12
+#define WLAN_FC_STYPE_QOS_CFPOLL 14
+#define WLAN_FC_STYPE_QOS_CFACKPOLL 15
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_FT 2
+#define WLAN_AUTH_SAE 3
+#define WLAN_AUTH_LEAP 128
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_ESS BIT(0)
+#define WLAN_CAPABILITY_IBSS BIT(1)
+#define WLAN_CAPABILITY_CF_POLLABLE BIT(2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST BIT(3)
+#define WLAN_CAPABILITY_PRIVACY BIT(4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE BIT(5)
+#define WLAN_CAPABILITY_PBCC BIT(6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY BIT(7)
+#define WLAN_CAPABILITY_SPECTRUM_MGMT BIT(8)
+#define WLAN_CAPABILITY_QOS BIT(9)
+#define WLAN_CAPABILITY_SHORT_SLOT_TIME BIT(10)
+#define WLAN_CAPABILITY_APSD BIT(11)
+#define WLAN_CAPABILITY_RADIO_MEASUREMENT BIT(12)
+#define WLAN_CAPABILITY_DSSS_OFDM BIT(13)
+#define WLAN_CAPABILITY_DELAYED_BLOCK_ACK BIT(14)
+#define WLAN_CAPABILITY_IMM_BLOCK_ACK BIT(15)
+
+/* Status codes (IEEE 802.11-2007, 7.3.1.9, Table 7-23) */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_TDLS_WAKEUP_ALTERNATE 2
+#define WLAN_STATUS_TDLS_WAKEUP_REJECT 3
+#define WLAN_STATUS_SECURITY_DISABLED 5
+#define WLAN_STATUS_UNACCEPTABLE_LIFETIME 6
+#define WLAN_STATUS_NOT_IN_SAME_BSS 7
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* IEEE 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+/* IEEE 802.11h */
+#define WLAN_STATUS_SPEC_MGMT_REQUIRED 22
+#define WLAN_STATUS_PWR_CAPABILITY_NOT_VALID 23
+#define WLAN_STATUS_SUPPORTED_CHANNEL_NOT_VALID 24
+/* IEEE 802.11g */
+#define WLAN_STATUS_ASSOC_DENIED_NO_SHORT_SLOT_TIME 25
+#define WLAN_STATUS_ASSOC_DENIED_NO_DSSS_OFDM 26
+#define WLAN_STATUS_ASSOC_DENIED_NO_HT 27
+#define WLAN_STATUS_R0KH_UNREACHABLE 28
+#define WLAN_STATUS_ASSOC_DENIED_NO_PCO 29
+/* IEEE 802.11w */
+#define WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY 30
+#define WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION 31
+#define WLAN_STATUS_UNSPECIFIED_QOS_FAILURE 32
+#define WLAN_STATUS_REQUEST_DECLINED 37
+#define WLAN_STATUS_INVALID_PARAMETERS 38
+/* IEEE 802.11i */
+#define WLAN_STATUS_INVALID_IE 40
+#define WLAN_STATUS_GROUP_CIPHER_NOT_VALID 41
+#define WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID 42
+#define WLAN_STATUS_AKMP_NOT_VALID 43
+#define WLAN_STATUS_UNSUPPORTED_RSN_IE_VERSION 44
+#define WLAN_STATUS_INVALID_RSN_IE_CAPAB 45
+#define WLAN_STATUS_CIPHER_REJECTED_PER_POLICY 46
+#define WLAN_STATUS_TS_NOT_CREATED 47
+#define WLAN_STATUS_DIRECT_LINK_NOT_ALLOWED 48
+#define WLAN_STATUS_DEST_STA_NOT_PRESENT 49
+#define WLAN_STATUS_DEST_STA_NOT_QOS_STA 50
+#define WLAN_STATUS_ASSOC_DENIED_LISTEN_INT_TOO_LARGE 51
+/* IEEE 802.11r */
+#define WLAN_STATUS_INVALID_FT_ACTION_FRAME_COUNT 52
+#define WLAN_STATUS_INVALID_PMKID 53
+#define WLAN_STATUS_INVALID_MDIE 54
+#define WLAN_STATUS_INVALID_FTIE 55
+#define WLAN_STATUS_GAS_ADV_PROTO_NOT_SUPPORTED 59
+#define WLAN_STATUS_NO_OUTSTANDING_GAS_REQ 60
+#define WLAN_STATUS_GAS_RESP_NOT_RECEIVED 61
+#define WLAN_STATUS_STA_TIMED_OUT_WAITING_FOR_GAS_RESP 62
+#define WLAN_STATUS_GAS_RESP_LARGER_THAN_LIMIT 63
+#define WLAN_STATUS_REQ_REFUSED_HOME 64
+#define WLAN_STATUS_ADV_SRV_UNREACHABLE 65
+#define WLAN_STATUS_REQ_REFUSED_SSPN 67
+#define WLAN_STATUS_REQ_REFUSED_UNAUTH_ACCESS 68
+#define WLAN_STATUS_INVALID_RSNIE 72
+#define WLAN_STATUS_ANTI_CLOGGING_TOKEN_REQ 76
+#define WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED 77
+#define WLAN_STATUS_TRANSMISSION_FAILURE 79
+#define WLAN_STATUS_REJECTED_WITH_SUGGESTED_BSS_TRANSITION 82
+#define WLAN_STATUS_PENDING_ADMITTING_FST_SESSION 86
+#define WLAN_STATUS_QUERY_RESP_OUTSTANDING 95
+#define WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL 99
+#define WLAN_STATUS_ASSOC_DENIED_NO_VHT 104
+
+/* Reason codes (IEEE 802.11-2007, 7.3.1.7, Table 7-22) */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+/* IEEE 802.11h */
+#define WLAN_REASON_PWR_CAPABILITY_NOT_VALID 10
+#define WLAN_REASON_SUPPORTED_CHANNEL_NOT_VALID 11
+/* IEEE 802.11i */
+#define WLAN_REASON_INVALID_IE 13
+#define WLAN_REASON_MICHAEL_MIC_FAILURE 14
+#define WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT 15
+#define WLAN_REASON_GROUP_KEY_UPDATE_TIMEOUT 16
+#define WLAN_REASON_IE_IN_4WAY_DIFFERS 17
+#define WLAN_REASON_GROUP_CIPHER_NOT_VALID 18
+#define WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID 19
+#define WLAN_REASON_AKMP_NOT_VALID 20
+#define WLAN_REASON_UNSUPPORTED_RSN_IE_VERSION 21
+#define WLAN_REASON_INVALID_RSN_IE_CAPAB 22
+#define WLAN_REASON_IEEE_802_1X_AUTH_FAILED 23
+#define WLAN_REASON_CIPHER_SUITE_REJECTED 24
+#define WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE 25
+#define WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED 26
+/* IEEE 802.11e */
+#define WLAN_REASON_DISASSOC_LOW_ACK 34
+/* IEEE 802.11s */
+#define WLAN_REASON_MESH_PEERING_CANCELLED 52
+#define WLAN_REASON_MESH_MAX_PEERS 53
+#define WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION 54
+#define WLAN_REASON_MESH_CLOSE_RCVD 55
+#define WLAN_REASON_MESH_MAX_RETRIES 56
+#define WLAN_REASON_MESH_CONFIRM_TIMEOUT 57
+#define WLAN_REASON_MESH_INVALID_GTK 58
+#define WLAN_REASON_MESH_INCONSISTENT_PARAMS 59
+#define WLAN_REASON_MESH_INVALID_SECURITY_CAP 60
+
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_COUNTRY 7
+#define WLAN_EID_BSS_LOAD 11
+#define WLAN_EID_CHALLENGE 16
+/* EIDs defined by IEEE 802.11h - START */
+#define WLAN_EID_PWR_CONSTRAINT 32
+#define WLAN_EID_PWR_CAPABILITY 33
+#define WLAN_EID_TPC_REQUEST 34
+#define WLAN_EID_TPC_REPORT 35
+#define WLAN_EID_SUPPORTED_CHANNELS 36
+#define WLAN_EID_CHANNEL_SWITCH 37
+#define WLAN_EID_MEASURE_REQUEST 38
+#define WLAN_EID_MEASURE_REPORT 39
+#define WLAN_EID_QUITE 40
+#define WLAN_EID_IBSS_DFS 41
+/* EIDs defined by IEEE 802.11h - END */
+#define WLAN_EID_ERP_INFO 42
+#define WLAN_EID_HT_CAP 45
+#define WLAN_EID_QOS 46
+#define WLAN_EID_RSN 48
+#define WLAN_EID_EXT_SUPP_RATES 50
+#define WLAN_EID_NEIGHBOR_REPORT 52
+#define WLAN_EID_MOBILITY_DOMAIN 54
+#define WLAN_EID_FAST_BSS_TRANSITION 55
+#define WLAN_EID_TIMEOUT_INTERVAL 56
+#define WLAN_EID_RIC_DATA 57
+#define WLAN_EID_SUPPORTED_OPERATING_CLASSES 59
+#define WLAN_EID_EXT_CHANSWITCH_ANN 60
+#define WLAN_EID_HT_OPERATION 61
+#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62
+#define WLAN_EID_WAPI 68
+#define WLAN_EID_TIME_ADVERTISEMENT 69
+#define WLAN_EID_RRM_ENABLED_CAPABILITIES 70
+#define WLAN_EID_20_40_BSS_COEXISTENCE 72
+#define WLAN_EID_20_40_BSS_INTOLERANT 73
+#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74
+#define WLAN_EID_MMIE 76
+#define WLAN_EID_SSID_LIST 84
+#define WLAN_EID_BSS_MAX_IDLE_PERIOD 90
+#define WLAN_EID_TFS_REQ 91
+#define WLAN_EID_TFS_RESP 92
+#define WLAN_EID_WNMSLEEP 93
+#define WLAN_EID_TIME_ZONE 98
+#define WLAN_EID_LINK_ID 101
+#define WLAN_EID_INTERWORKING 107
+#define WLAN_EID_ADV_PROTO 108
+#define WLAN_EID_QOS_MAP_SET 110
+#define WLAN_EID_ROAMING_CONSORTIUM 111
+#define WLAN_EID_MESH_CONFIG 113
+#define WLAN_EID_MESH_ID 114
+#define WLAN_EID_PEER_MGMT 117
+#define WLAN_EID_EXT_CAPAB 127
+#define WLAN_EID_AMPE 139
+#define WLAN_EID_MIC 140
+#define WLAN_EID_CCKM 156
+#define WLAN_EID_MULTI_BAND 158
+#define WLAN_EID_SESSION_TRANSITION 164
+#define WLAN_EID_VHT_CAP 191
+#define WLAN_EID_VHT_OPERATION 192
+#define WLAN_EID_VHT_EXTENDED_BSS_LOAD 193
+#define WLAN_EID_VHT_WIDE_BW_CHSWITCH 194
+#define WLAN_EID_VHT_TRANSMIT_POWER_ENVELOPE 195
+#define WLAN_EID_VHT_CHANNEL_SWITCH_WRAPPER 196
+#define WLAN_EID_VHT_AID 197
+#define WLAN_EID_VHT_QUIET_CHANNEL 198
+#define WLAN_EID_VHT_OPERATING_MODE_NOTIFICATION 199
+#define WLAN_EID_VENDOR_SPECIFIC 221
+
+
+/* Action frame categories (IEEE 802.11-2007, 7.3.1.11, Table 7-24) */
+#define WLAN_ACTION_SPECTRUM_MGMT 0
+#define WLAN_ACTION_QOS 1
+#define WLAN_ACTION_DLS 2
+#define WLAN_ACTION_BLOCK_ACK 3
+#define WLAN_ACTION_PUBLIC 4
+#define WLAN_ACTION_RADIO_MEASUREMENT 5
+#define WLAN_ACTION_FT 6
+#define WLAN_ACTION_HT 7
+#define WLAN_ACTION_SA_QUERY 8
+#define WLAN_ACTION_PROTECTED_DUAL 9
+#define WLAN_ACTION_WNM 10
+#define WLAN_ACTION_UNPROTECTED_WNM 11
+#define WLAN_ACTION_TDLS 12
+#define WLAN_ACTION_SELF_PROTECTED 15
+#define WLAN_ACTION_WMM 17 /* WMM Specification 1.1 */
+#define WLAN_ACTION_FST 18
+#define WLAN_ACTION_VENDOR_SPECIFIC 127
+
+/* Public action codes */
+#define WLAN_PA_20_40_BSS_COEX 0
+#define WLAN_PA_VENDOR_SPECIFIC 9
+#define WLAN_PA_GAS_INITIAL_REQ 10
+#define WLAN_PA_GAS_INITIAL_RESP 11
+#define WLAN_PA_GAS_COMEBACK_REQ 12
+#define WLAN_PA_GAS_COMEBACK_RESP 13
+#define WLAN_TDLS_DISCOVERY_RESPONSE 14
+
+/* Protected Dual of Public Action frames */
+#define WLAN_PROT_DSE_ENABLEMENT 1
+#define WLAN_PROT_DSE_DEENABLEMENT 2
+#define WLAN_PROT_EXT_CSA 4
+#define WLAN_PROT_MEASUREMENT_REQ 5
+#define WLAN_PROT_MEASUREMENT_REPORT 6
+#define WLAN_PROT_DSE_POWER_CONSTRAINT 8
+#define WLAN_PROT_VENDOR_SPECIFIC 9
+#define WLAN_PROT_GAS_INITIAL_REQ 10
+#define WLAN_PROT_GAS_INITIAL_RESP 11
+#define WLAN_PROT_GAS_COMEBACK_REQ 12
+#define WLAN_PROT_GAS_COMEBACK_RESP 13
+
+/* SA Query Action frame (IEEE 802.11w/D8.0, 7.4.9) */
+#define WLAN_SA_QUERY_REQUEST 0
+#define WLAN_SA_QUERY_RESPONSE 1
+
+#define WLAN_SA_QUERY_TR_ID_LEN 2
+
+/* TDLS action codes */
+#define WLAN_TDLS_SETUP_REQUEST 0
+#define WLAN_TDLS_SETUP_RESPONSE 1
+#define WLAN_TDLS_SETUP_CONFIRM 2
+#define WLAN_TDLS_TEARDOWN 3
+#define WLAN_TDLS_PEER_TRAFFIC_INDICATION 4
+#define WLAN_TDLS_CHANNEL_SWITCH_REQUEST 5
+#define WLAN_TDLS_CHANNEL_SWITCH_RESPONSE 6
+#define WLAN_TDLS_PEER_PSM_REQUEST 7
+#define WLAN_TDLS_PEER_PSM_RESPONSE 8
+#define WLAN_TDLS_PEER_TRAFFIC_RESPONSE 9
+#define WLAN_TDLS_DISCOVERY_REQUEST 10
+
+/* Radio Measurement Action codes */
+#define WLAN_RRM_RADIO_MEASUREMENT_REQUEST 0
+#define WLAN_RRM_RADIO_MEASUREMENT_REPORT 1
+#define WLAN_RRM_LINK_MEASUREMENT_REQUEST 2
+#define WLAN_RRM_LINK_MEASUREMENT_REPORT 3
+#define WLAN_RRM_NEIGHBOR_REPORT_REQUEST 4
+#define WLAN_RRM_NEIGHBOR_REPORT_RESPONSE 5
+
+/* Radio Measurement capabilities (from RRM Capabilities IE) */
+/* byte 1 (out of 5) */
+#define WLAN_RRM_CAPS_LINK_MEASUREMENT BIT(0)
+#define WLAN_RRM_CAPS_NEIGHBOR_REPORT BIT(1)
+/* byte 2 (out of 5) */
+#define WLAN_RRM_CAPS_LCI_MEASUREMENT BIT(4)
+/* byte 5 (out of 5) */
+#define WLAN_RRM_CAPS_FTM_RANGE_REPORT BIT(2)
+
+/*
+ * IEEE P802.11-REVmc/D5.0, 9.4.2.21.19 (Fine Timing Measurement Range
+ * request) - Minimum AP count
+ */
+#define WLAN_RRM_RANGE_REQ_MAX_MIN_AP 15
+
+/* Timeout Interval Type */
+#define WLAN_TIMEOUT_REASSOC_DEADLINE 1
+#define WLAN_TIMEOUT_KEY_LIFETIME 2
+#define WLAN_TIMEOUT_ASSOC_COMEBACK 3
+
+/* Interworking element (IEEE 802.11u) - Access Network Options */
+#define INTERWORKING_ANO_ACCESS_NETWORK_MASK 0x0f
+#define INTERWORKING_ANO_INTERNET 0x10
+#define INTERWORKING_ANO_ASRA 0x20
+#define INTERWORKING_ANO_ESR 0x40
+#define INTERWORKING_ANO_UESA 0x80
+
+#define INTERWORKING_ANT_PRIVATE 0
+#define INTERWORKING_ANT_PRIVATE_WITH_GUEST 1
+#define INTERWORKING_ANT_CHARGEABLE_PUBLIC 2
+#define INTERWORKING_ANT_FREE_PUBLIC 3
+#define INTERWORKING_ANT_PERSONAL_DEVICE 4
+#define INTERWORKING_ANT_EMERGENCY_SERVICES 5
+#define INTERWORKING_ANT_TEST 6
+#define INTERWORKING_ANT_WILDCARD 15
+
+/* Advertisement Protocol ID definitions (IEEE Std 802.11u-2011) */
+enum adv_proto_id {
+ ACCESS_NETWORK_QUERY_PROTOCOL = 0,
+ MIH_INFO_SERVICE = 1,
+ MIH_CMD_AND_EVENT_DISCOVERY = 2,
+ EMERGENCY_ALERT_SYSTEM = 3,
+ ADV_PROTO_VENDOR_SPECIFIC = 221
+};
+
+/* Access Network Query Protocol info ID definitions (IEEE Std 802.11u-2011) */
+enum anqp_info_id {
+ ANQP_QUERY_LIST = 256,
+ ANQP_CAPABILITY_LIST = 257,
+ ANQP_VENUE_NAME = 258,
+ ANQP_EMERGENCY_CALL_NUMBER = 259,
+ ANQP_NETWORK_AUTH_TYPE = 260,
+ ANQP_ROAMING_CONSORTIUM = 261,
+ ANQP_IP_ADDR_TYPE_AVAILABILITY = 262,
+ ANQP_NAI_REALM = 263,
+ ANQP_3GPP_CELLULAR_NETWORK = 264,
+ ANQP_AP_GEOSPATIAL_LOCATION = 265,
+ ANQP_AP_CIVIC_LOCATION = 266,
+ ANQP_AP_LOCATION_PUBLIC_URI = 267,
+ ANQP_DOMAIN_NAME = 268,
+ ANQP_EMERGENCY_ALERT_URI = 269,
+ ANQP_TDLS_CAPABILITY = 270,
+ ANQP_EMERGENCY_NAI = 271,
+ ANQP_NEIGHBOR_REPORT = 272,
+ ANQP_VENUE_URL = 277,
+ ANQP_ADVICE_OF_CHARGE = 278,
+ ANQP_LOCAL_CONTENT = 279,
+ ANQP_VENDOR_SPECIFIC = 56797
+};
+
+/* NAI Realm list - EAP Method subfield - Authentication Parameter ID */
+enum nai_realm_eap_auth_param {
+ NAI_REALM_EAP_AUTH_EXPANDED_EAP_METHOD = 1,
+ NAI_REALM_EAP_AUTH_NON_EAP_INNER_AUTH = 2,
+ NAI_REALM_EAP_AUTH_INNER_AUTH_EAP_METHOD = 3,
+ NAI_REALM_EAP_AUTH_EXPANDED_INNER_EAP_METHOD = 4,
+ NAI_REALM_EAP_AUTH_CRED_TYPE = 5,
+ NAI_REALM_EAP_AUTH_TUNNELED_CRED_TYPE = 6,
+ NAI_REALM_EAP_AUTH_VENDOR_SPECIFIC = 221
+};
+
+enum nai_realm_eap_auth_inner_non_eap {
+ NAI_REALM_INNER_NON_EAP_PAP = 1,
+ NAI_REALM_INNER_NON_EAP_CHAP = 2,
+ NAI_REALM_INNER_NON_EAP_MSCHAP = 3,
+ NAI_REALM_INNER_NON_EAP_MSCHAPV2 = 4
+};
+
+enum nai_realm_eap_cred_type {
+ NAI_REALM_CRED_TYPE_SIM = 1,
+ NAI_REALM_CRED_TYPE_USIM = 2,
+ NAI_REALM_CRED_TYPE_NFC_SECURE_ELEMENT = 3,
+ NAI_REALM_CRED_TYPE_HARDWARE_TOKEN = 4,
+ NAI_REALM_CRED_TYPE_SOFTOKEN = 5,
+ NAI_REALM_CRED_TYPE_CERTIFICATE = 6,
+ NAI_REALM_CRED_TYPE_USERNAME_PASSWORD = 7,
+ NAI_REALM_CRED_TYPE_NONE = 8,
+ NAI_REALM_CRED_TYPE_ANONYMOUS = 9,
+ NAI_REALM_CRED_TYPE_VENDOR_SPECIFIC = 10
+};
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-81 - Measurement type definitions for
+ * measurement requests
+ */
+enum measure_type {
+ MEASURE_TYPE_BASIC = 0,
+ MEASURE_TYPE_CCA = 1,
+ MEASURE_TYPE_RPI_HIST = 2,
+ MEASURE_TYPE_CHANNEL_LOAD = 3,
+ MEASURE_TYPE_NOISE_HIST = 4,
+ MEASURE_TYPE_BEACON = 5,
+ MEASURE_TYPE_FRAME = 6,
+ MEASURE_TYPE_STA_STATISTICS = 7,
+ MEASURE_TYPE_LCI = 8,
+ MEASURE_TYPE_TRANSMIT_STREAM = 9,
+ MEASURE_TYPE_MULTICAST_DIAG = 10,
+ MEASURE_TYPE_LOCATION_CIVIC = 11,
+ MEASURE_TYPE_LOCATION_ID = 12,
+ MEASURE_TYPE_DIRECTIONAL_CHAN_QUALITY = 13,
+ MEASURE_TYPE_DIRECTIONAL_MEASURE = 14,
+ MEASURE_TYPE_DIRECTIONAL_STATS = 15,
+ MEASURE_TYPE_FTM_RANGE = 16,
+ MEASURE_TYPE_MEASURE_PAUSE = 255,
+};
+
+/* IEEE Std 802.11-2012 Table 8-71 - Location subject definition */
+enum location_subject {
+ LOCATION_SUBJECT_LOCAL = 0,
+ LOCATION_SUBJECT_REMOTE = 1,
+ LOCATION_SUBJECT_3RD_PARTY = 2,
+};
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-94 - Optional subelement IDs for LCI request
+ */
+enum lci_req_subelem {
+ LCI_REQ_SUBELEM_AZIMUTH_REQ = 1,
+ LCI_REQ_SUBELEM_ORIGINATOR_MAC_ADDR = 2,
+ LCI_REQ_SUBELEM_TARGET_MAC_ADDR = 3,
+ LCI_REQ_SUBELEM_MAX_AGE = 4,
+};
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+struct ieee80211_hdr {
+ le16 frame_control;
+ le16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ le16 seq_ctrl;
+ /* followed by 'u8 addr4[6];' if ToDS and FromDS is set in data frame
+ */
+} STRUCT_PACKED;
+
+#define IEEE80211_DA_FROMDS addr1
+#define IEEE80211_BSSID_FROMDS addr2
+#define IEEE80211_SA_FROMDS addr3
+
+#define IEEE80211_HDRLEN (sizeof(struct ieee80211_hdr))
+
+#define IEEE80211_FC(type, stype) host_to_le16((type << 2) | (stype << 4))
+
+struct ieee80211_mgmt {
+ le16 frame_control;
+ le16 duration;
+ u8 da[6];
+ u8 sa[6];
+ u8 bssid[6];
+ le16 seq_ctrl;
+ union {
+ struct {
+ le16 auth_alg;
+ le16 auth_transaction;
+ le16 status_code;
+ /* possibly followed by Challenge text */
+ u8 variable[];
+ } STRUCT_PACKED auth;
+ struct {
+ le16 reason_code;
+ u8 variable[];
+ } STRUCT_PACKED deauth;
+ struct {
+ le16 capab_info;
+ le16 listen_interval;
+ /* followed by SSID and Supported rates */
+ u8 variable[];
+ } STRUCT_PACKED assoc_req;
+ struct {
+ le16 capab_info;
+ le16 status_code;
+ le16 aid;
+ /* followed by Supported rates */
+ u8 variable[];
+ } STRUCT_PACKED assoc_resp, reassoc_resp;
+ struct {
+ le16 capab_info;
+ le16 listen_interval;
+ u8 current_ap[6];
+ /* followed by SSID and Supported rates */
+ u8 variable[];
+ } STRUCT_PACKED reassoc_req;
+ struct {
+ le16 reason_code;
+ u8 variable[];
+ } STRUCT_PACKED disassoc;
+ struct {
+ u8 timestamp[8];
+ le16 beacon_int;
+ le16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params, TIM */
+ u8 variable[];
+ } STRUCT_PACKED beacon;
+ /* probe_req: only variable items: SSID, Supported rates */
+ struct {
+ u8 timestamp[8];
+ le16 beacon_int;
+ le16 capab_info;
+ /* followed by some of SSID, Supported rates,
+ * FH Params, DS Params, CF Params, IBSS Params */
+ u8 variable[];
+ } STRUCT_PACKED probe_resp;
+ struct {
+ u8 category;
+ union {
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u8 status_code;
+ u8 variable[];
+ } STRUCT_PACKED wmm_action;
+ struct{
+ u8 action_code;
+ u8 element_id;
+ u8 length;
+ u8 switch_mode;
+ u8 new_chan;
+ u8 switch_count;
+ } STRUCT_PACKED chan_switch;
+ struct {
+ u8 action;
+ u8 sta_addr[ETH_ALEN];
+ u8 target_ap_addr[ETH_ALEN];
+ u8 variable[]; /* FT Request */
+ } STRUCT_PACKED ft_action_req;
+ struct {
+ u8 action;
+ u8 sta_addr[ETH_ALEN];
+ u8 target_ap_addr[ETH_ALEN];
+ le16 status_code;
+ u8 variable[]; /* FT Request */
+ } STRUCT_PACKED ft_action_resp;
+ struct {
+ u8 action;
+ u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+ } STRUCT_PACKED sa_query_req;
+ struct {
+ u8 action; /* */
+ u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+ } STRUCT_PACKED sa_query_resp;
+ struct {
+ u8 action;
+ u8 dialogtoken;
+ u8 variable[];
+ } STRUCT_PACKED wnm_sleep_req;
+ struct {
+ u8 action;
+ u8 dialogtoken;
+ le16 keydata_len;
+ u8 variable[];
+ } STRUCT_PACKED wnm_sleep_resp;
+ struct {
+ u8 action;
+ u8 variable[];
+ } STRUCT_PACKED public_action;
+ struct {
+ u8 action; /* 9 */
+ u8 oui[3];
+ /* Vendor-specific content */
+ u8 variable[];
+ } STRUCT_PACKED vs_public_action;
+ struct {
+ u8 action; /* 7 */
+ u8 dialog_token;
+ u8 req_mode;
+ le16 disassoc_timer;
+ u8 validity_interval;
+ /* BSS Termination Duration (optional),
+ * Session Information URL (optional),
+ * BSS Transition Candidate List
+ * Entries */
+ u8 variable[];
+ } STRUCT_PACKED bss_tm_req;
+ struct {
+ u8 action; /* 8 */
+ u8 dialog_token;
+ u8 status_code;
+ u8 bss_termination_delay;
+ /* Target BSSID (optional),
+ * BSS Transition Candidate List
+ * Entries (optional) */
+ u8 variable[];
+ } STRUCT_PACKED bss_tm_resp;
+ struct {
+ u8 action; /* 6 */
+ u8 dialog_token;
+ u8 query_reason;
+ /* BSS Transition Candidate List
+ * Entries (optional) */
+ u8 variable[];
+ } STRUCT_PACKED bss_tm_query;
+ struct {
+ u8 action; /* 15 */
+ u8 variable[];
+ } STRUCT_PACKED slf_prot_action;
+ struct {
+ u8 action;
+ u8 variable[];
+ } STRUCT_PACKED fst_action;
+ struct {
+ u8 action;
+ u8 dialog_token;
+ u8 variable[];
+ } STRUCT_PACKED rrm;
+ } u;
+ } STRUCT_PACKED action;
+ } u;
+} STRUCT_PACKED;
+
+
+#define IEEE80211_MAX_MMPDU_SIZE 2304
+
+/* Rx MCS bitmask is in the first 77 bits of supported_mcs_set */
+#define IEEE80211_HT_MCS_MASK_LEN 10
+
+/* HT Capabilities element */
+struct ieee80211_ht_capabilities {
+ le16 ht_capabilities_info;
+ u8 a_mpdu_params; /* Maximum A-MPDU Length Exponent B0..B1
+ * Minimum MPDU Start Spacing B2..B4
+ * Reserved B5..B7 */
+ u8 supported_mcs_set[16];
+ le16 ht_extended_capabilities;
+ le32 tx_bf_capability_info;
+ u8 asel_capabilities;
+} STRUCT_PACKED;
+
+
+/* HT Operation element */
+struct ieee80211_ht_operation {
+ u8 primary_chan;
+ /* Five octets of HT Operation Information */
+ u8 ht_param; /* B0..B7 */
+ le16 operation_mode; /* B8..B23 */
+ le16 param; /* B24..B39 */
+ u8 basic_mcs_set[16];
+} STRUCT_PACKED;
+
+
+struct ieee80211_obss_scan_parameters {
+ le16 scan_passive_dwell;
+ le16 scan_active_dwell;
+ le16 width_trigger_scan_interval;
+ le16 scan_passive_total_per_channel;
+ le16 scan_active_total_per_channel;
+ le16 channel_transition_delay_factor;
+ le16 scan_activity_threshold;
+} STRUCT_PACKED;
+
+
+struct ieee80211_vht_capabilities {
+ le32 vht_capabilities_info;
+ struct {
+ le16 rx_map;
+ le16 rx_highest;
+ le16 tx_map;
+ le16 tx_highest;
+ } vht_supported_mcs_set;
+} STRUCT_PACKED;
+
+struct ieee80211_vht_operation {
+ u8 vht_op_info_chwidth;
+ u8 vht_op_info_chan_center_freq_seg0_idx;
+ u8 vht_op_info_chan_center_freq_seg1_idx;
+ le16 vht_basic_mcs_set;
+} STRUCT_PACKED;
+
+struct ieee80211_ampe_ie {
+ u8 selected_pairwise_suite[4];
+ u8 local_nonce[32];
+ u8 peer_nonce[32];
+ /* Followed by
+ * Key Replay Counter[8] (optional)
+ * (only in Mesh Group Key Inform/Acknowledge frames)
+ * GTKdata[variable] (optional)
+ * (MGTK[variable] || Key RSC[8] || GTKExpirationTime[4])
+ * IGTKdata[variable] (optional)
+ * (Key ID[2], IPN[6], IGTK[variable] in IGTK KDE format)
+ */
+} STRUCT_PACKED;
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+#define ERP_INFO_NON_ERP_PRESENT BIT(0)
+#define ERP_INFO_USE_PROTECTION BIT(1)
+#define ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
+
+#define OVERLAPPING_BSS_TRANS_DELAY_FACTOR 5
+
+/* HT Capabilities Info field within HT Capabilities element */
+#define HT_CAP_INFO_LDPC_CODING_CAP ((u16) BIT(0))
+#define HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET ((u16) BIT(1))
+#define HT_CAP_INFO_SMPS_MASK ((u16) (BIT(2) | BIT(3)))
+#define HT_CAP_INFO_SMPS_STATIC ((u16) 0)
+#define HT_CAP_INFO_SMPS_DYNAMIC ((u16) BIT(2))
+#define HT_CAP_INFO_SMPS_DISABLED ((u16) (BIT(2) | BIT(3)))
+#define HT_CAP_INFO_GREEN_FIELD ((u16) BIT(4))
+#define HT_CAP_INFO_SHORT_GI20MHZ ((u16) BIT(5))
+#define HT_CAP_INFO_SHORT_GI40MHZ ((u16) BIT(6))
+#define HT_CAP_INFO_TX_STBC ((u16) BIT(7))
+#define HT_CAP_INFO_RX_STBC_MASK ((u16) (BIT(8) | BIT(9)))
+#define HT_CAP_INFO_RX_STBC_1 ((u16) BIT(8))
+#define HT_CAP_INFO_RX_STBC_12 ((u16) BIT(9))
+#define HT_CAP_INFO_RX_STBC_123 ((u16) (BIT(8) | BIT(9)))
+#define HT_CAP_INFO_DELAYED_BA ((u16) BIT(10))
+#define HT_CAP_INFO_MAX_AMSDU_SIZE ((u16) BIT(11))
+#define HT_CAP_INFO_DSSS_CCK40MHZ ((u16) BIT(12))
+/* B13 - Reserved (was PSMP support during P802.11n development) */
+#define HT_CAP_INFO_40MHZ_INTOLERANT ((u16) BIT(14))
+#define HT_CAP_INFO_LSIG_TXOP_PROTECT_SUPPORT ((u16) BIT(15))
+
+/* HT Extended Capabilities field within HT Capabilities element */
+#define EXT_HT_CAP_INFO_PCO ((u16) BIT(0))
+#define EXT_HT_CAP_INFO_PCO_TRANS_TIME_MASK ((u16) (BIT(1) | BIT(2)))
+#define EXT_HT_CAP_INFO_TRANS_TIME_OFFSET 1
+/* B3..B7 - Reserved */
+#define EXT_HT_CAP_INFO_MCS_FEEDBACK_MASK ((u16) (BIT(8) | BIT(9)))
+#define EXT_HT_CAP_INFO_MCS_FEEDBACK_OFFSET 8
+#define EXT_HT_CAP_INFO_HTC_SUPPORT ((u16) BIT(10))
+#define EXT_HT_CAP_INFO_RD_RESPONDER ((u16) BIT(11))
+/* B12..B15 - Reserved */
+
+/* Transmit Beanforming Capabilities within HT Capabilities element */
+#define TX_BF_CAP_IMPLICIT_TXBF_RX_CAP ((u32) BIT(0))
+#define TX_BF_CAP_RX_STAGGERED_SOUNDING_CAP ((u32) BIT(1))
+#define TX_BF_CAP_TX_STAGGERED_SOUNDING_CAP ((u32) BIT(2))
+#define TX_BF_CAP_RX_NDP_CAP ((u32) BIT(3))
+#define TX_BF_CAP_TX_NDP_CAP ((u32) BIT(4))
+#define TX_BF_CAP_IMPLICIT_TX_BF_CAP ((u32) BIT(5))
+#define TX_BF_CAP_CALIBRATION_MASK ((u32) (BIT(6) | BIT(7))
+#define TX_BF_CAP_CALIB_OFFSET 6
+#define TX_BF_CAP_EXPLICIT_CSI_TXBF_CAP ((u32) BIT(8))
+#define TX_BF_CAP_EXPLICIT_NONCOMPR_STEERING_CAP ((u32) BIT(9))
+#define TX_BF_CAP_EXPLICIT_COMPR_STEERING_CAP ((u32) BIT(10))
+#define TX_BF_CAP_EXPLICIT_TX_BF_CSI_FEEDBACK_MASK ((u32) (BIT(10) | BIT(11)))
+#define TX_BF_CAP_EXPLICIT_BF_CSI_FEEDBACK_OFFSET 11
+#define TX_BF_CAP_EXPLICIT_UNCOMPR_STEERING_MATRIX_FEEDBACK_OFFSET 13
+#define TX_BF_CAP_EXPLICIT_COMPRESSED_STEERING_MATRIX_FEEDBACK_OFFSET 15
+#define TX_BF_CAP_MINIMAL_GROUPING_OFFSET 17
+#define TX_BF_CAP_CSI_NUM_BEAMFORMER_ANT_OFFSET 19
+#define TX_BF_CAP_UNCOMPRESSED_STEERING_MATRIX_BEAMFORMER_ANT_OFFSET 21
+#define TX_BF_CAP_COMPRESSED_STEERING_MATRIX_BEAMFORMER_ANT_OFFSET 23
+#define TX_BF_CAP_SCI_MAX_OF_ROWS_BEANFORMER_SUPPORTED_OFFSET 25
+#define TX_BF_CAP_CHANNEL_ESTIMATION_CAP_MASK ((u32) (BIT(27) | BIT(28)))
+#define TX_BF_CAP_CHANNEL_ESTIMATION_CAP_OFFSET 27
+/* B29..B31 - Reserved */
+
+/* ASEL Capability field within HT Capabilities element */
+#define ASEL_CAP_ASEL_CAPABLE ((u8) BIT(0))
+#define ASEL_CAP_EXPLICIT_CSI_FEEDBACK_BASED_TX_AS_CAP ((u8) BIT(1))
+#define ASEL_CAP_ANT_INDICES_FEEDBACK_BASED_TX_AS_CAP ((u8) BIT(2))
+#define ASEL_CAP_EXPLICIT_CSI_FEEDBACK_CAP ((u8) BIT(3))
+#define ASEL_CAP_ANT_INDICES_FEEDBACK_CAP ((u8) BIT(4))
+#define ASEL_CAP_RX_AS_CAP ((u8) BIT(5))
+#define ASEL_CAP_TX_SOUNDING_PPDUS_CAP ((u8) BIT(6))
+/* B7 - Reserved */
+
+/* First octet of HT Operation Information within HT Operation element */
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE ((u8) BIT(0))
+#define HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW ((u8) BIT(0) | BIT(1))
+#define HT_INFO_HT_PARAM_STA_CHNL_WIDTH ((u8) BIT(2))
+#define HT_INFO_HT_PARAM_RIFS_MODE ((u8) BIT(3))
+/* B4..B7 - Reserved */
+
+/* HT Protection (B8..B9 of HT Operation Information) */
+#define HT_PROT_NO_PROTECTION 0
+#define HT_PROT_NONMEMBER_PROTECTION 1
+#define HT_PROT_20MHZ_PROTECTION 2
+#define HT_PROT_NON_HT_MIXED 3
+/* Bits within ieee80211_ht_operation::operation_mode (BIT(0) maps to B8 in
+ * HT Operation Information) */
+#define HT_OPER_OP_MODE_HT_PROT_MASK ((u16) (BIT(0) | BIT(1))) /* B8..B9 */
+#define HT_OPER_OP_MODE_NON_GF_HT_STAS_PRESENT ((u16) BIT(2)) /* B10 */
+/* BIT(3), i.e., B11 in HT Operation Information field - Reserved */
+#define HT_OPER_OP_MODE_OBSS_NON_HT_STAS_PRESENT ((u16) BIT(4)) /* B12 */
+/* BIT(5)..BIT(15), i.e., B13..B23 - Reserved */
+
+/* Last two octets of HT Operation Information (BIT(0) = B24) */
+/* B24..B29 - Reserved */
+#define HT_OPER_PARAM_DUAL_BEACON ((u16) BIT(6))
+#define HT_OPER_PARAM_DUAL_CTS_PROTECTION ((u16) BIT(7))
+#define HT_OPER_PARAM_STBC_BEACON ((u16) BIT(8))
+#define HT_OPER_PARAM_LSIG_TXOP_PROT_FULL_SUPP ((u16) BIT(9))
+#define HT_OPER_PARAM_PCO_ACTIVE ((u16) BIT(10))
+#define HT_OPER_PARAM_PCO_PHASE ((u16) BIT(11))
+/* B36..B39 - Reserved */
+
+#define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126
+#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127
+
+/* VHT Defines */
+#define VHT_CAP_MAX_MPDU_LENGTH_7991 ((u32) BIT(0))
+#define VHT_CAP_MAX_MPDU_LENGTH_11454 ((u32) BIT(1))
+#define VHT_CAP_MAX_MPDU_LENGTH_MASK ((u32) BIT(0) | BIT(1))
+#define VHT_CAP_MAX_MPDU_LENGTH_MASK_SHIFT 0
+#define VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ((u32) BIT(2))
+#define VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ ((u32) BIT(3))
+#define VHT_CAP_SUPP_CHAN_WIDTH_MASK ((u32) BIT(2) | BIT(3))
+#define VHT_CAP_RXLDPC ((u32) BIT(4))
+#define VHT_CAP_SHORT_GI_80 ((u32) BIT(5))
+#define VHT_CAP_SHORT_GI_160 ((u32) BIT(6))
+#define VHT_CAP_TXSTBC ((u32) BIT(7))
+#define VHT_CAP_RXSTBC_1 ((u32) BIT(8))
+#define VHT_CAP_RXSTBC_2 ((u32) BIT(9))
+#define VHT_CAP_RXSTBC_3 ((u32) BIT(8) | BIT(9))
+#define VHT_CAP_RXSTBC_4 ((u32) BIT(10))
+#define VHT_CAP_RXSTBC_MASK ((u32) BIT(8) | BIT(9) | \
+ BIT(10))
+#define VHT_CAP_RXSTBC_MASK_SHIFT 8
+#define VHT_CAP_SU_BEAMFORMER_CAPABLE ((u32) BIT(11))
+#define VHT_CAP_SU_BEAMFORMEE_CAPABLE ((u32) BIT(12))
+#define VHT_CAP_BEAMFORMEE_STS_MAX ((u32) BIT(13) | \
+ BIT(14) | BIT(15))
+#define VHT_CAP_BEAMFORMEE_STS_MAX_SHIFT 13
+#define VHT_CAP_BEAMFORMEE_STS_OFFSET 13
+#define VHT_CAP_SOUNDING_DIMENSION_MAX ((u32) BIT(16) | \
+ BIT(17) | BIT(18))
+#define VHT_CAP_SOUNDING_DIMENSION_MAX_SHIFT 16
+#define VHT_CAP_SOUNDING_DIMENSION_OFFSET 16
+#define VHT_CAP_MU_BEAMFORMER_CAPABLE ((u32) BIT(19))
+#define VHT_CAP_MU_BEAMFORMEE_CAPABLE ((u32) BIT(20))
+#define VHT_CAP_VHT_TXOP_PS ((u32) BIT(21))
+#define VHT_CAP_HTC_VHT ((u32) BIT(22))
+
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_1 ((u32) BIT(23))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_2 ((u32) BIT(24))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_3 ((u32) BIT(23) | BIT(24))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_4 ((u32) BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_5 ((u32) BIT(23) | BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_6 ((u32) BIT(24) | BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX ((u32) BIT(23) | \
+ BIT(24) | BIT(25))
+#define VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX_SHIFT 23
+#define VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB ((u32) BIT(27))
+#define VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB ((u32) BIT(26) | BIT(27))
+#define VHT_CAP_RX_ANTENNA_PATTERN ((u32) BIT(28))
+#define VHT_CAP_TX_ANTENNA_PATTERN ((u32) BIT(29))
+
+#define VHT_OPMODE_CHANNEL_WIDTH_MASK ((u8) BIT(0) | BIT(1))
+#define VHT_OPMODE_CHANNEL_RxNSS_MASK ((u8) BIT(4) | BIT(5) | \
+ BIT(6))
+#define VHT_OPMODE_NOTIF_RX_NSS_SHIFT 4
+
+#define VHT_RX_NSS_MAX_STREAMS 8
+
+/* VHT channel widths */
+#define VHT_CHANWIDTH_USE_HT 0
+#define VHT_CHANWIDTH_80MHZ 1
+#define VHT_CHANWIDTH_160MHZ 2
+#define VHT_CHANWIDTH_80P80MHZ 3
+
+#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
+ * 00:50:F2 */
+#define WPA_IE_VENDOR_TYPE 0x0050f201
+#define WMM_IE_VENDOR_TYPE 0x0050f202
+#define WPS_IE_VENDOR_TYPE 0x0050f204
+#define OUI_WFA 0x506f9a
+#define P2P_IE_VENDOR_TYPE 0x506f9a09
+#define WFD_IE_VENDOR_TYPE 0x506f9a0a
+#define WFD_OUI_TYPE 10
+#define HS20_IE_VENDOR_TYPE 0x506f9a10
+#define OSEN_IE_VENDOR_TYPE 0x506f9a12
+#define MBO_IE_VENDOR_TYPE 0x506f9a16
+#define MBO_OUI_TYPE 22
+
+#define WMM_OUI_TYPE 2
+#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WMM_VERSION 1
+
+#define WMM_ACTION_CODE_ADDTS_REQ 0
+#define WMM_ACTION_CODE_ADDTS_RESP 1
+#define WMM_ACTION_CODE_DELTS 2
+
+#define WMM_ADDTS_STATUS_ADMISSION_ACCEPTED 0
+#define WMM_ADDTS_STATUS_INVALID_PARAMETERS 1
+/* 2 - Reserved */
+#define WMM_ADDTS_STATUS_REFUSED 3
+/* 4-255 - Reserved */
+
+/* WMM TSPEC Direction Field Values */
+#define WMM_TSPEC_DIRECTION_UPLINK 0
+#define WMM_TSPEC_DIRECTION_DOWNLINK 1
+/* 2 - Reserved */
+#define WMM_TSPEC_DIRECTION_BI_DIRECTIONAL 3
+
+/*
+ * WMM Information Element (used in (Re)Association Request frames; may also be
+ * used in Beacon frames)
+ */
+struct wmm_information_element {
+ /* Element ID: 221 (0xdd); Length: 7 */
+ /* required fields for WMM version 1 */
+ u8 oui[3]; /* 00:50:f2 */
+ u8 oui_type; /* 2 */
+ u8 oui_subtype; /* 0 */
+ u8 version; /* 1 for WMM version 1.0 */
+ u8 qos_info; /* AP/STA specific QoS info */
+
+} STRUCT_PACKED;
+
+#define WMM_QOSINFO_AP_UAPSD 0x80
+
+#define WMM_QOSINFO_STA_AC_MASK 0x0f
+#define WMM_QOSINFO_STA_SP_MASK 0x03
+#define WMM_QOSINFO_STA_SP_SHIFT 5
+
+#define WMM_AC_AIFSN_MASK 0x0f
+#define WMM_AC_AIFNS_SHIFT 0
+#define WMM_AC_ACM 0x10
+#define WMM_AC_ACI_MASK 0x60
+#define WMM_AC_ACI_SHIFT 5
+
+#define WMM_AC_ECWMIN_MASK 0x0f
+#define WMM_AC_ECWMIN_SHIFT 0
+#define WMM_AC_ECWMAX_MASK 0xf0
+#define WMM_AC_ECWMAX_SHIFT 4
+
+struct wmm_ac_parameter {
+ u8 aci_aifsn; /* AIFSN, ACM, ACI */
+ u8 cw; /* ECWmin, ECWmax (CW = 2^ECW - 1) */
+ le16 txop_limit;
+} STRUCT_PACKED;
+
+/*
+ * WMM Parameter Element (used in Beacon, Probe Response, and (Re)Association
+ * Response frmaes)
+ */
+struct wmm_parameter_element {
+ /* Element ID: 221 (0xdd); Length: 24 */
+ /* required fields for WMM version 1 */
+ u8 oui[3]; /* 00:50:f2 */
+ u8 oui_type; /* 2 */
+ u8 oui_subtype; /* 1 */
+ u8 version; /* 1 for WMM version 1.0 */
+ u8 qos_info; /* AP/STA specific QoS info */
+ u8 reserved; /* 0 */
+ struct wmm_ac_parameter ac[4]; /* AC_BE, AC_BK, AC_VI, AC_VO */
+
+} STRUCT_PACKED;
+
+/* WMM TSPEC Element */
+struct wmm_tspec_element {
+ u8 eid; /* 221 = 0xdd */
+ u8 length; /* 6 + 55 = 61 */
+ u8 oui[3]; /* 00:50:f2 */
+ u8 oui_type; /* 2 */
+ u8 oui_subtype; /* 2 */
+ u8 version; /* 1 */
+ /* WMM TSPEC body (55 octets): */
+ u8 ts_info[3];
+ le16 nominal_msdu_size;
+ le16 maximum_msdu_size;
+ le32 minimum_service_interval;
+ le32 maximum_service_interval;
+ le32 inactivity_interval;
+ le32 suspension_interval;
+ le32 service_start_time;
+ le32 minimum_data_rate;
+ le32 mean_data_rate;
+ le32 peak_data_rate;
+ le32 maximum_burst_size;
+ le32 delay_bound;
+ le32 minimum_phy_rate;
+ le16 surplus_bandwidth_allowance;
+ le16 medium_time;
+} STRUCT_PACKED;
+
+
+/* Access Categories / ACI to AC coding */
+enum wmm_ac {
+ WMM_AC_BE = 0 /* Best Effort */,
+ WMM_AC_BK = 1 /* Background */,
+ WMM_AC_VI = 2 /* Video */,
+ WMM_AC_VO = 3 /* Voice */,
+ WMM_AC_NUM = 4
+};
+
+
+#define HS20_INDICATION_OUI_TYPE 16
+#define HS20_ANQP_OUI_TYPE 17
+#define HS20_OSEN_OUI_TYPE 18
+#define HS20_STYPE_QUERY_LIST 1
+#define HS20_STYPE_CAPABILITY_LIST 2
+#define HS20_STYPE_OPERATOR_FRIENDLY_NAME 3
+#define HS20_STYPE_WAN_METRICS 4
+#define HS20_STYPE_CONNECTION_CAPABILITY 5
+#define HS20_STYPE_NAI_HOME_REALM_QUERY 6
+#define HS20_STYPE_OPERATING_CLASS 7
+#define HS20_STYPE_OSU_PROVIDERS_LIST 8
+#define HS20_STYPE_ICON_REQUEST 10
+#define HS20_STYPE_ICON_BINARY_FILE 11
+
+#define HS20_DGAF_DISABLED 0x01
+#define HS20_PPS_MO_ID_PRESENT 0x02
+#define HS20_ANQP_DOMAIN_ID_PRESENT 0x04
+#define HS20_VERSION 0x10 /* Release 2 */
+
+/* WNM-Notification WFA vendors specific subtypes */
+#define HS20_WNM_SUB_REM_NEEDED 0
+#define HS20_WNM_DEAUTH_IMMINENT_NOTICE 1
+
+#define HS20_DEAUTH_REASON_CODE_BSS 0
+#define HS20_DEAUTH_REASON_CODE_ESS 1
+
+/* MBO v0.0_r19, 4.2: MBO Attributes */
+/* Table 4-5: MBO Attributes */
+enum mbo_attr_id {
+ MBO_ATTR_ID_AP_CAPA_IND = 1,
+ MBO_ATTR_ID_NON_PREF_CHAN_REPORT = 2,
+ MBO_ATTR_ID_CELL_DATA_CAPA = 3,
+ MBO_ATTR_ID_ASSOC_DISALLOW = 4,
+ MBO_ATTR_ID_CELL_DATA_PREF = 5,
+ MBO_ATTR_ID_TRANSITION_REASON = 6,
+ MBO_ATTR_ID_TRANSITION_REJECT_REASON = 7,
+ MBO_ATTR_ID_ASSOC_RETRY_DELAY = 8,
+};
+
+/* MBO v0.0_r19, 4.2.1: MBO AP Capability Indication Attribute */
+/* Table 4-7: MBO AP Capability Indication Field Values */
+#define MBO_AP_CAPA_CELL_AWARE BIT(6)
+
+/* MBO v0.0_r19, 4.2.2: Non-preferred Channel Report Attribute */
+/* Table 4-10: Reason Code Field Values */
+enum mbo_non_pref_chan_reason {
+ MBO_NON_PREF_CHAN_REASON_UNSPECIFIED = 0,
+ MBO_NON_PREF_CHAN_REASON_RSSI = 1,
+ MBO_NON_PREF_CHAN_REASON_EXT_INTERFERENCE = 2,
+ MBO_NON_PREF_CHAN_REASON_INT_INTERFERENCE = 3,
+};
+
+/* MBO v0.0_r19, 4.2.3: Cellular Data Capabilities Attribute */
+/* Table 4-13: Cellular Data Connectivity Field */
+enum mbo_cellular_capa {
+ MBO_CELL_CAPA_AVAILABLE = 1,
+ MBO_CELL_CAPA_NOT_AVAILABLE = 2,
+ MBO_CELL_CAPA_NOT_SUPPORTED = 3,
+};
+
+/* MBO v0.0_r19, 4.2.4: Association Disallowed Attribute */
+/* Table 4-15: Reason Code Field Values */
+enum mbo_assoc_disallow_reason {
+ MBO_ASSOC_DISALLOW_REASON_UNSPECIFIED = 1,
+ MBO_ASSOC_DISALLOW_REASON_MAX_STA = 2,
+ MBO_ASSOC_DISALLOW_REASON_AIR_INTERFERENCE = 3,
+ MBO_ASSOC_DISALLOW_REASON_AUTH_SERVER_OVERLOAD = 4,
+ MBO_ASSOC_DISALLOW_REASON_LOW_RSSI = 5,
+};
+
+/* MBO v0.0_r19, 4.2.5: Cellular Data Connection Preference Attribute */
+/* Table 4-17: Cellular Preference Field Values */
+enum mbo_cell_pref {
+ MBO_CELL_PREF_EXCLUDED = 0,
+ MBO_CELL_PREF_NO_USE = 1,
+ MBO_CELL_PREF_USE = 255
+};
+
+/* MBO v0.0_r19, 4.2.6: Transition Reason Code Attribute */
+/* Table 4-19: Transition Reason Code Field Values */
+enum mbo_transition_reason {
+ MBO_TRANSITION_REASON_UNSPECIFIED = 0,
+ MBO_TRANSITION_REASON_FRAME_LOSS = 1,
+ MBO_TRANSITION_REASON_DELAY = 2,
+ MBO_TRANSITION_REASON_BANDWIDTH = 3,
+ MBO_TRANSITION_REASON_LOAD_BALANCE = 4,
+ MBO_TRANSITION_REASON_RSSI = 5,
+ MBO_TRANSITION_REASON_RETRANSMISSIONS = 6,
+ MBO_TRANSITION_REASON_INTERFERENCE = 7,
+ MBO_TRANSITION_REASON_GRAY_ZONE = 8,
+ MBO_TRANSITION_REASON_PREMIUM_AP = 9,
+};
+
+/* MBO v0.0_r19, 4.2.7: Transition Rejection Reason Code Attribute */
+/* Table 4-21: Transition Rejection Reason Code Field Values */
+enum mbo_transition_reject_reason {
+ MBO_TRANSITION_REJECT_REASON_UNSPECIFIED = 0,
+ MBO_TRANSITION_REJECT_REASON_FRAME_LOSS = 1,
+ MBO_TRANSITION_REJECT_REASON_DELAY = 2,
+ MBO_TRANSITION_REJECT_REASON_QOS_CAPACITY = 3,
+ MBO_TRANSITION_REJECT_REASON_RSSI = 4,
+ MBO_TRANSITION_REJECT_REASON_INTERFERENCE = 5,
+ MBO_TRANSITION_REJECT_REASON_SERVICES = 6,
+};
+
+/* MBO v0.0_r19, 4.4: WNM-Notification vendor subelements */
+enum wfa_wnm_notif_subelem_id {
+ WFA_WNM_NOTIF_SUBELEM_NON_PREF_CHAN_REPORT = 2,
+ WFA_WNM_NOTIF_SUBELEM_CELL_DATA_CAPA = 3,
+};
+
+/* MBO v0.0_r25, 4.3: MBO ANQP-elements */
+#define MBO_ANQP_OUI_TYPE 0x12
+#define MBO_ANQP_SUBTYPE_CELL_CONN_PREF 1
+
+/* Wi-Fi Direct (P2P) */
+
+#define P2P_OUI_TYPE 9
+
+enum p2p_attr_id {
+ P2P_ATTR_STATUS = 0,
+ P2P_ATTR_MINOR_REASON_CODE = 1,
+ P2P_ATTR_CAPABILITY = 2,
+ P2P_ATTR_DEVICE_ID = 3,
+ P2P_ATTR_GROUP_OWNER_INTENT = 4,
+ P2P_ATTR_CONFIGURATION_TIMEOUT = 5,
+ P2P_ATTR_LISTEN_CHANNEL = 6,
+ P2P_ATTR_GROUP_BSSID = 7,
+ P2P_ATTR_EXT_LISTEN_TIMING = 8,
+ P2P_ATTR_INTENDED_INTERFACE_ADDR = 9,
+ P2P_ATTR_MANAGEABILITY = 10,
+ P2P_ATTR_CHANNEL_LIST = 11,
+ P2P_ATTR_NOTICE_OF_ABSENCE = 12,
+ P2P_ATTR_DEVICE_INFO = 13,
+ P2P_ATTR_GROUP_INFO = 14,
+ P2P_ATTR_GROUP_ID = 15,
+ P2P_ATTR_INTERFACE = 16,
+ P2P_ATTR_OPERATING_CHANNEL = 17,
+ P2P_ATTR_INVITATION_FLAGS = 18,
+ P2P_ATTR_OOB_GO_NEG_CHANNEL = 19,
+ P2P_ATTR_SERVICE_HASH = 21,
+ P2P_ATTR_SESSION_INFORMATION_DATA = 22,
+ P2P_ATTR_CONNECTION_CAPABILITY = 23,
+ P2P_ATTR_ADVERTISEMENT_ID = 24,
+ P2P_ATTR_ADVERTISED_SERVICE = 25,
+ P2P_ATTR_SESSION_ID = 26,
+ P2P_ATTR_FEATURE_CAPABILITY = 27,
+ P2P_ATTR_PERSISTENT_GROUP = 28,
+ P2P_ATTR_VENDOR_SPECIFIC = 221
+};
+
+#define P2P_MAX_GO_INTENT 15
+
+/* P2P Capability - Device Capability bitmap */
+#define P2P_DEV_CAPAB_SERVICE_DISCOVERY BIT(0)
+#define P2P_DEV_CAPAB_CLIENT_DISCOVERABILITY BIT(1)
+#define P2P_DEV_CAPAB_CONCURRENT_OPER BIT(2)
+#define P2P_DEV_CAPAB_INFRA_MANAGED BIT(3)
+#define P2P_DEV_CAPAB_DEVICE_LIMIT BIT(4)
+#define P2P_DEV_CAPAB_INVITATION_PROCEDURE BIT(5)
+
+/* P2P Capability - Group Capability bitmap */
+#define P2P_GROUP_CAPAB_GROUP_OWNER BIT(0)
+#define P2P_GROUP_CAPAB_PERSISTENT_GROUP BIT(1)
+#define P2P_GROUP_CAPAB_GROUP_LIMIT BIT(2)
+#define P2P_GROUP_CAPAB_INTRA_BSS_DIST BIT(3)
+#define P2P_GROUP_CAPAB_CROSS_CONN BIT(4)
+#define P2P_GROUP_CAPAB_PERSISTENT_RECONN BIT(5)
+#define P2P_GROUP_CAPAB_GROUP_FORMATION BIT(6)
+#define P2P_GROUP_CAPAB_IP_ADDR_ALLOCATION BIT(7)
+
+/* P2PS Coordination Protocol Transport Bitmap */
+#define P2PS_FEATURE_CAPAB_UDP_TRANSPORT BIT(0)
+#define P2PS_FEATURE_CAPAB_MAC_TRANSPORT BIT(1)
+
+struct p2ps_feature_capab {
+ u8 cpt;
+ u8 reserved;
+} STRUCT_PACKED;
+
+/* Invitation Flags */
+#define P2P_INVITATION_FLAGS_TYPE BIT(0)
+
+/* P2P Manageability */
+#define P2P_MAN_DEVICE_MANAGEMENT BIT(0)
+#define P2P_MAN_CROSS_CONNECTION_PERMITTED BIT(1)
+#define P2P_MAN_COEXISTENCE_OPTIONAL BIT(2)
+
+enum p2p_status_code {
+ P2P_SC_SUCCESS = 0,
+ P2P_SC_FAIL_INFO_CURRENTLY_UNAVAILABLE = 1,
+ P2P_SC_FAIL_INCOMPATIBLE_PARAMS = 2,
+ P2P_SC_FAIL_LIMIT_REACHED = 3,
+ P2P_SC_FAIL_INVALID_PARAMS = 4,
+ P2P_SC_FAIL_UNABLE_TO_ACCOMMODATE = 5,
+ P2P_SC_FAIL_PREV_PROTOCOL_ERROR = 6,
+ P2P_SC_FAIL_NO_COMMON_CHANNELS = 7,
+ P2P_SC_FAIL_UNKNOWN_GROUP = 8,
+ P2P_SC_FAIL_BOTH_GO_INTENT_15 = 9,
+ P2P_SC_FAIL_INCOMPATIBLE_PROV_METHOD = 10,
+ P2P_SC_FAIL_REJECTED_BY_USER = 11,
+ P2P_SC_SUCCESS_DEFERRED = 12,
+};
+
+enum p2p_role_indication {
+ P2P_DEVICE_NOT_IN_GROUP = 0x00,
+ P2P_CLIENT_IN_A_GROUP = 0x01,
+ P2P_GO_IN_A_GROUP = 0x02,
+};
+
+#define P2P_WILDCARD_SSID "DIRECT-"
+#define P2P_WILDCARD_SSID_LEN 7
+
+/* P2P action frames */
+enum p2p_act_frame_type {
+ P2P_NOA = 0,
+ P2P_PRESENCE_REQ = 1,
+ P2P_PRESENCE_RESP = 2,
+ P2P_GO_DISC_REQ = 3
+};
+
+/* P2P public action frames */
+enum p2p_action_frame_type {
+ P2P_GO_NEG_REQ = 0,
+ P2P_GO_NEG_RESP = 1,
+ P2P_GO_NEG_CONF = 2,
+ P2P_INVITATION_REQ = 3,
+ P2P_INVITATION_RESP = 4,
+ P2P_DEV_DISC_REQ = 5,
+ P2P_DEV_DISC_RESP = 6,
+ P2P_PROV_DISC_REQ = 7,
+ P2P_PROV_DISC_RESP = 8
+};
+
+enum p2p_service_protocol_type {
+ P2P_SERV_ALL_SERVICES = 0,
+ P2P_SERV_BONJOUR = 1,
+ P2P_SERV_UPNP = 2,
+ P2P_SERV_WS_DISCOVERY = 3,
+ P2P_SERV_WIFI_DISPLAY = 4,
+ P2P_SERV_P2PS = 11,
+ P2P_SERV_VENDOR_SPECIFIC = 255
+};
+
+enum p2p_sd_status {
+ P2P_SD_SUCCESS = 0,
+ P2P_SD_PROTO_NOT_AVAILABLE = 1,
+ P2P_SD_REQUESTED_INFO_NOT_AVAILABLE = 2,
+ P2P_SD_BAD_REQUEST = 3
+};
+
+
+enum wifi_display_subelem {
+ WFD_SUBELEM_DEVICE_INFO = 0,
+ WFD_SUBELEM_ASSOCIATED_BSSID = 1,
+ WFD_SUBELEM_AUDIO_FORMATS = 2,
+ WFD_SUBELEM_VIDEO_FORMATS = 3,
+ WFD_SUBELEM_3D_VIDEO_FORMATS = 4,
+ WFD_SUBELEM_CONTENT_PROTECTION = 5,
+ WFD_SUBELEM_COUPLED_SINK = 6,
+ WFD_SUBELEM_EXT_CAPAB = 7,
+ WFD_SUBELEM_LOCAL_IP_ADDRESS = 8,
+ WFD_SUBELEM_SESSION_INFO = 9
+};
+
+/* 802.11s */
+#define MESH_SYNC_METHOD_NEIGHBOR_OFFSET 1
+#define MESH_SYNC_METHOD_VENDOR 255
+#define MESH_PATH_PROTOCOL_HWMP 1
+#define MESH_PATH_PROTOCOL_VENDOR 255
+#define MESH_PATH_METRIC_AIRTIME 1
+#define MESH_PATH_METRIC_VENDOR 255
+/* IEEE 802.11s - Mesh Capability */
+#define MESH_CAP_ACCEPT_ADDITIONAL_PEER BIT(0)
+#define MESH_CAP_MCCA_SUPPORTED BIT(1)
+#define MESH_CAP_MCCA_ENABLED BIT(2)
+#define MESH_CAP_FORWARDING BIT(3)
+#define MESH_CAP_MBCA_ENABLED BIT(4)
+#define MESH_CAP_TBTT_ADJUSTING BIT(5)
+#define MESH_CAP_MESH_PS_LEVEL BIT(6)
+
+enum plink_action_field {
+ PLINK_OPEN = 1,
+ PLINK_CONFIRM,
+ PLINK_CLOSE
+};
+
+#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
+#define VENDOR_VHT_TYPE 0x04
+#define VENDOR_VHT_SUBTYPE 0x08
+#define VENDOR_VHT_SUBTYPE2 0x00
+
+#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
+
+/* cipher suite selectors */
+#define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00
+#define WLAN_CIPHER_SUITE_WEP40 0x000FAC01
+#define WLAN_CIPHER_SUITE_TKIP 0x000FAC02
+/* reserved: 0x000FAC03 */
+#define WLAN_CIPHER_SUITE_CCMP 0x000FAC04
+#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05
+#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06
+#define WLAN_CIPHER_SUITE_NO_GROUP_ADDR 0x000FAC07
+#define WLAN_CIPHER_SUITE_GCMP 0x000FAC08
+#define WLAN_CIPHER_SUITE_GCMP_256 0x000FAC09
+#define WLAN_CIPHER_SUITE_CCMP_256 0x000FAC0A
+#define WLAN_CIPHER_SUITE_BIP_GMAC_128 0x000FAC0B
+#define WLAN_CIPHER_SUITE_BIP_GMAC_256 0x000FAC0C
+#define WLAN_CIPHER_SUITE_BIP_CMAC_256 0x000FAC0D
+
+#define WLAN_CIPHER_SUITE_SMS4 0x00147201
+
+#define WLAN_CIPHER_SUITE_CKIP 0x00409600
+#define WLAN_CIPHER_SUITE_CKIP_CMIC 0x00409601
+#define WLAN_CIPHER_SUITE_CMIC 0x00409602
+#define WLAN_CIPHER_SUITE_KRK 0x004096FF /* for nl80211 use only */
+
+/* AKM suite selectors */
+#define WLAN_AKM_SUITE_8021X 0x000FAC01
+#define WLAN_AKM_SUITE_PSK 0x000FAC02
+#define WLAN_AKM_SUITE_FT_8021X 0x000FAC03
+#define WLAN_AKM_SUITE_FT_PSK 0x000FAC04
+#define WLAN_AKM_SUITE_8021X_SHA256 0x000FAC05
+#define WLAN_AKM_SUITE_PSK_SHA256 0x000FAC06
+#define WLAN_AKM_SUITE_8021X_SUITE_B 0x000FAC11
+#define WLAN_AKM_SUITE_8021X_SUITE_B_192 0x000FAC12
+#define WLAN_AKM_SUITE_CCKM 0x00409600
+#define WLAN_AKM_SUITE_OSEN 0x506f9a01
+
+
+/* IEEE 802.11v - WNM Action field values */
+enum wnm_action {
+ WNM_EVENT_REQ = 0,
+ WNM_EVENT_REPORT = 1,
+ WNM_DIAGNOSTIC_REQ = 2,
+ WNM_DIAGNOSTIC_REPORT = 3,
+ WNM_LOCATION_CFG_REQ = 4,
+ WNM_LOCATION_CFG_RESP = 5,
+ WNM_BSS_TRANS_MGMT_QUERY = 6,
+ WNM_BSS_TRANS_MGMT_REQ = 7,
+ WNM_BSS_TRANS_MGMT_RESP = 8,
+ WNM_FMS_REQ = 9,
+ WNM_FMS_RESP = 10,
+ WNM_COLLOCATED_INTERFERENCE_REQ = 11,
+ WNM_COLLOCATED_INTERFERENCE_REPORT = 12,
+ WNM_TFS_REQ = 13,
+ WNM_TFS_RESP = 14,
+ WNM_TFS_NOTIFY = 15,
+ WNM_SLEEP_MODE_REQ = 16,
+ WNM_SLEEP_MODE_RESP = 17,
+ WNM_TIM_BROADCAST_REQ = 18,
+ WNM_TIM_BROADCAST_RESP = 19,
+ WNM_QOS_TRAFFIC_CAPAB_UPDATE = 20,
+ WNM_CHANNEL_USAGE_REQ = 21,
+ WNM_CHANNEL_USAGE_RESP = 22,
+ WNM_DMS_REQ = 23,
+ WNM_DMS_RESP = 24,
+ WNM_TIMING_MEASUREMENT_REQ = 25,
+ WNM_NOTIFICATION_REQ = 26,
+ WNM_NOTIFICATION_RESP = 27
+};
+
+/* IEEE 802.11v - BSS Transition Management Request - Request Mode */
+#define WNM_BSS_TM_REQ_PREF_CAND_LIST_INCLUDED BIT(0)
+#define WNM_BSS_TM_REQ_ABRIDGED BIT(1)
+#define WNM_BSS_TM_REQ_DISASSOC_IMMINENT BIT(2)
+#define WNM_BSS_TM_REQ_BSS_TERMINATION_INCLUDED BIT(3)
+#define WNM_BSS_TM_REQ_ESS_DISASSOC_IMMINENT BIT(4)
+
+/* IEEE Std 802.11-2012 - Table 8-253 */
+enum bss_trans_mgmt_status_code {
+ WNM_BSS_TM_ACCEPT = 0,
+ WNM_BSS_TM_REJECT_UNSPECIFIED = 1,
+ WNM_BSS_TM_REJECT_INSUFFICIENT_BEACON = 2,
+ WNM_BSS_TM_REJECT_INSUFFICIENT_CAPABITY = 3,
+ WNM_BSS_TM_REJECT_UNDESIRED = 4,
+ WNM_BSS_TM_REJECT_DELAY_REQUEST = 5,
+ WNM_BSS_TM_REJECT_STA_CANDIDATE_LIST_PROVIDED = 6,
+ WNM_BSS_TM_REJECT_NO_SUITABLE_CANDIDATES = 7,
+ WNM_BSS_TM_REJECT_LEAVING_ESS = 8
+};
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-150 - Optional subelement IDs for
+ * neighbor report
+ */
+#define WNM_NEIGHBOR_TSF 1
+#define WNM_NEIGHBOR_CONDENSED_COUNTRY_STRING 2
+#define WNM_NEIGHBOR_BSS_TRANSITION_CANDIDATE 3
+#define WNM_NEIGHBOR_BSS_TERMINATION_DURATION 4
+#define WNM_NEIGHBOR_BEARING 5
+#define WNM_NEIGHBOR_WIDE_BW_CHAN 6
+#define WNM_NEIGHBOR_MEASUREMENT_REPORT 39
+#define WNM_NEIGHBOR_HT_CAPAB 45
+#define WNM_NEIGHBOR_HT_OPER 61
+#define WNM_NEIGHBOR_SEC_CHAN_OFFSET 62
+#define WNM_NEIGHBOR_MEASUREMENT_PILOT 66
+#define WNM_NEIGHBOR_RRM_ENABLED_CAPABILITIES 70
+#define WNM_NEIGHBOR_MULTIPLE_BSSID 71
+#define WNM_NEIGHBOR_VHT_CAPAB 191
+#define WNM_NEIGHBOR_VHT_OPER 192
+
+/* QoS action */
+enum qos_action {
+ QOS_ADDTS_REQ = 0,
+ QOS_ADDTS_RESP = 1,
+ QOS_DELTS = 2,
+ QOS_SCHEDULE = 3,
+ QOS_QOS_MAP_CONFIG = 4,
+};
+
+/* IEEE Std 802.11-2012, 8.4.2.62 20/40 BSS Coexistence element */
+#define WLAN_20_40_BSS_COEX_INFO_REQ BIT(0)
+#define WLAN_20_40_BSS_COEX_40MHZ_INTOL BIT(1)
+#define WLAN_20_40_BSS_COEX_20MHZ_WIDTH_REQ BIT(2)
+#define WLAN_20_40_BSS_COEX_OBSS_EXEMPT_REQ BIT(3)
+#define WLAN_20_40_BSS_COEX_OBSS_EXEMPT_GRNT BIT(4)
+
+struct ieee80211_2040_bss_coex_ie {
+ u8 element_id;
+ u8 length;
+ u8 coex_param;
+} STRUCT_PACKED;
+
+struct ieee80211_2040_intol_chan_report {
+ u8 element_id;
+ u8 length;
+ u8 op_class;
+ u8 variable[0]; /* Channel List */
+} STRUCT_PACKED;
+
+/* IEEE 802.11v - WNM-Sleep Mode element */
+struct wnm_sleep_element {
+ u8 eid; /* WLAN_EID_WNMSLEEP */
+ u8 len;
+ u8 action_type; /* WNM_SLEEP_ENTER/WNM_SLEEP_MODE_EXIT */
+ u8 status;
+ le16 intval;
+} STRUCT_PACKED;
+
+#define WNM_SLEEP_MODE_ENTER 0
+#define WNM_SLEEP_MODE_EXIT 1
+
+enum wnm_sleep_mode_response_status {
+ WNM_STATUS_SLEEP_ACCEPT = 0,
+ WNM_STATUS_SLEEP_EXIT_ACCEPT_GTK_UPDATE = 1,
+ WNM_STATUS_DENIED_ACTION = 2,
+ WNM_STATUS_DENIED_TMP = 3,
+ WNM_STATUS_DENIED_KEY = 4,
+ WNM_STATUS_DENIED_OTHER_WNM_SERVICE = 5
+};
+
+/* WNM-Sleep Mode subelement IDs */
+enum wnm_sleep_mode_subelement_id {
+ WNM_SLEEP_SUBELEM_GTK = 0,
+ WNM_SLEEP_SUBELEM_IGTK = 1
+};
+
+/* Channel Switch modes (802.11h) */
+#define CHAN_SWITCH_MODE_ALLOW_TX 0
+#define CHAN_SWITCH_MODE_BLOCK_TX 1
+
+struct tpc_report {
+ u8 eid;
+ u8 len;
+ u8 tx_power;
+ u8 link_margin;
+} STRUCT_PACKED;
+
+#define RRM_CAPABILITIES_IE_LEN 5
+
+/* IEEE Std 802.11-2012, 8.5.7.4 - Link Measurement Request frame format */
+struct rrm_link_measurement_request {
+ u8 dialog_token;
+ s8 tx_power;
+ s8 max_tp;
+ u8 variable[0];
+} STRUCT_PACKED;
+
+/* IEEE Std 802.11-2012, 8.5.7.5 - Link Measurement Report frame format */
+struct rrm_link_measurement_report {
+ u8 dialog_token;
+ struct tpc_report tpc;
+ u8 rx_ant_id;
+ u8 tx_ant_id;
+ u8 rcpi;
+ u8 rsni;
+ u8 variable[0];
+} STRUCT_PACKED;
+
+/* IEEE Std 802.11ad-2012 - Multi-band element */
+struct multi_band_ie {
+ u8 eid; /* WLAN_EID_MULTI_BAND */
+ u8 len;
+ u8 mb_ctrl;
+ u8 band_id;
+ u8 op_class;
+ u8 chan;
+ u8 bssid[ETH_ALEN];
+ le16 beacon_int;
+ u8 tsf_offs[8];
+ u8 mb_connection_capability;
+ u8 fst_session_tmout;
+ /* Optional:
+ * STA MAC Address
+ * Pairwise Cipher Suite Count
+ * Pairwise Cipher Suite List
+ */
+ u8 variable[0];
+} STRUCT_PACKED;
+
+enum mb_ctrl_sta_role {
+ MB_STA_ROLE_AP = 0,
+ MB_STA_ROLE_TDLS_STA = 1,
+ MB_STA_ROLE_IBSS_STA = 2,
+ MB_STA_ROLE_PCP = 3,
+ MB_STA_ROLE_NON_PCP_NON_AP = 4
+};
+
+#define MB_CTRL_ROLE_MASK (BIT(0) | BIT(1) | BIT(2))
+#define MB_CTRL_ROLE(ctrl) ((u8) ((ctrl) & MB_CTRL_ROLE_MASK))
+#define MB_CTRL_STA_MAC_PRESENT ((u8) (BIT(3)))
+#define MB_CTRL_PAIRWISE_CIPHER_SUITE_PRESENT ((u8) (BIT(4)))
+
+enum mb_band_id {
+ MB_BAND_ID_WIFI_2_4GHZ = 2, /* 2.4 GHz */
+ MB_BAND_ID_WIFI_5GHZ = 4, /* 4.9 and 5 GHz */
+ MB_BAND_ID_WIFI_60GHZ = 5, /* 60 GHz */
+};
+
+#define MB_CONNECTION_CAPABILITY_AP ((u8) (BIT(0)))
+#define MB_CONNECTION_CAPABILITY_PCP ((u8) (BIT(1)))
+#define MB_CONNECTION_CAPABILITY_DLS ((u8) (BIT(2)))
+#define MB_CONNECTION_CAPABILITY_TDLS ((u8) (BIT(3)))
+#define MB_CONNECTION_CAPABILITY_IBSS ((u8) (BIT(4)))
+
+/* IEEE Std 802.11ad-2014 - FST Action field */
+enum fst_action {
+ FST_ACTION_SETUP_REQUEST = 0,
+ FST_ACTION_SETUP_RESPONSE = 1,
+ FST_ACTION_TEAR_DOWN = 2,
+ FST_ACTION_ACK_REQUEST = 3,
+ FST_ACTION_ACK_RESPONSE = 4,
+ FST_ACTION_ON_CHANNEL_TUNNEL = 5,
+};
+
+/* IEEE Std 802.11ac-2013, Annex C - dot11PHYType */
+enum phy_type {
+ PHY_TYPE_UNSPECIFIED = 0,
+ PHY_TYPE_FHSS = 1,
+ PHY_TYPE_DSSS = 2,
+ PHY_TYPE_IRBASEBAND = 3,
+ PHY_TYPE_OFDM = 4,
+ PHY_TYPE_HRDSSS = 5,
+ PHY_TYPE_ERP = 6,
+ PHY_TYPE_HT = 7,
+ PHY_TYPE_DMG = 8,
+ PHY_TYPE_VHT = 9,
+};
+
+/* IEEE P802.11-REVmc/D5.0, 9.4.2.37 - Neighbor Report element */
+/* BSSID Information Field */
+#define NEI_REP_BSSID_INFO_AP_NOT_REACH BIT(0)
+#define NEI_REP_BSSID_INFO_AP_UNKNOWN_REACH BIT(1)
+#define NEI_REP_BSSID_INFO_AP_REACHABLE (BIT(0) | BIT(1))
+#define NEI_REP_BSSID_INFO_SECURITY BIT(2)
+#define NEI_REP_BSSID_INFO_KEY_SCOPE BIT(3)
+#define NEI_REP_BSSID_INFO_SPECTRUM_MGMT BIT(4)
+#define NEI_REP_BSSID_INFO_QOS BIT(5)
+#define NEI_REP_BSSID_INFO_APSD BIT(6)
+#define NEI_REP_BSSID_INFO_RM BIT(7)
+#define NEI_REP_BSSID_INFO_DELAYED_BA BIT(8)
+#define NEI_REP_BSSID_INFO_IMM_BA BIT(9)
+#define NEI_REP_BSSID_INFO_MOBILITY_DOMAIN BIT(10)
+#define NEI_REP_BSSID_INFO_HT BIT(11)
+#define NEI_REP_BSSID_INFO_VHT BIT(12)
+#define NEI_REP_BSSID_INFO_FTM BIT(13)
+
+/*
+ * IEEE P802.11-REVmc/D5.0 Table 9-152 - HT/VHT Operation Information
+ * subfields.
+ * Note: These definitions are not the same as other VHT_CHANWIDTH_*.
+ */
+enum nr_chan_width {
+ NR_CHAN_WIDTH_20 = 0,
+ NR_CHAN_WIDTH_40 = 1,
+ NR_CHAN_WIDTH_80 = 2,
+ NR_CHAN_WIDTH_160 = 3,
+ NR_CHAN_WIDTH_80P80 = 4,
+};
+
+#endif /* IEEE802_11_DEFS_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/ieee802_1x_defs.h b/ap/app/wpa_supplicant-2.6/src/common/ieee802_1x_defs.h
new file mode 100755
index 0000000..a0c1d1b
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/ieee802_1x_defs.h
@@ -0,0 +1,78 @@
+/*
+ * IEEE Std 802.1X-2010 definitions
+ * Copyright (c) 2013-2014, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef IEEE802_1X_DEFS_H
+#define IEEE802_1X_DEFS_H
+
+#define CS_ID_LEN 8
+#define CS_ID_GCM_AES_128 0x0080020001000001ULL
+#define CS_NAME_GCM_AES_128 "GCM-AES-128"
+
+enum macsec_policy {
+ /**
+ * Should secure sessions.
+ * This accepts key server's advice to determine whether to secure the
+ * session or not.
+ */
+ SHOULD_SECURE,
+
+ /**
+ * Disabled MACsec - do not secure sessions.
+ */
+ DO_NOT_SECURE,
+};
+
+
+/* IEEE Std 802.1X-2010 - Table 11-6 - MACsec Capability */
+enum macsec_cap {
+ /**
+ * MACsec is not implemented
+ */
+ MACSEC_CAP_NOT_IMPLEMENTED,
+
+ /**
+ * 'Integrity without confidentiality'
+ */
+ MACSEC_CAP_INTEGRITY,
+
+ /**
+ * 'Integrity without confidentiality' and
+ * 'Integrity and confidentiality' with a confidentiality offset of 0
+ */
+ MACSEC_CAP_INTEG_AND_CONF,
+
+ /**
+ * 'Integrity without confidentiality' and
+ * 'Integrity and confidentiality' with a confidentiality offset of 0,
+ * 30, 50
+ */
+ MACSEC_CAP_INTEG_AND_CONF_0_30_50,
+};
+
+enum validate_frames {
+ Disabled,
+ Checked,
+ Strict,
+};
+
+/* IEEE Std 802.1X-2010 - Table 11-6 - Confidentiality Offset */
+enum confidentiality_offset {
+ CONFIDENTIALITY_NONE = 0,
+ CONFIDENTIALITY_OFFSET_0 = 1,
+ CONFIDENTIALITY_OFFSET_30 = 2,
+ CONFIDENTIALITY_OFFSET_50 = 3,
+};
+
+/* IEEE Std 802.1X-2010 - Table 9-2 */
+#define DEFAULT_PRIO_INFRA_PORT 0x10
+#define DEFAULT_PRIO_PRIMRAY_AP 0x30
+#define DEFAULT_PRIO_SECONDARY_AP 0x50
+#define DEFAULT_PRIO_GROUP_CA_MEMBER 0x70
+#define DEFAULT_PRIO_NOT_KEY_SERVER 0xFF
+
+#endif /* IEEE802_1X_DEFS_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/linux_bridge.h b/ap/app/wpa_supplicant-2.6/src/common/linux_bridge.h
new file mode 100755
index 0000000..7b76846
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/linux_bridge.h
@@ -0,0 +1,24 @@
+/*
+ * Linux bridge configuration kernel interface
+ * Copyright (c) 2016, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef LINUX_BRIDGE_H
+#define LINUX_BRIDGE_H
+
+/* This interface is defined in linux/if_bridge.h */
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+
+#endif /* LINUX_BRIDGE_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/linux_vlan.h b/ap/app/wpa_supplicant-2.6/src/common/linux_vlan.h
new file mode 100755
index 0000000..8a1dd6e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/linux_vlan.h
@@ -0,0 +1,52 @@
+/*
+ * Linux VLAN configuration kernel interface
+ * Copyright (c) 2016, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef LINUX_VLAN_H
+#define LINUX_VLAN_H
+
+/* This ioctl is defined in linux/sockios.h */
+
+#ifndef SIOCSIFVLAN
+#define SIOCSIFVLAN 0x8983
+#endif /* SIOCSIFVLAN */
+
+/* This interface is defined in linux/if_vlan.h */
+
+#define ADD_VLAN_CMD 0
+#define DEL_VLAN_CMD 1
+#define SET_VLAN_INGRESS_PRIORITY_CMD 2
+#define SET_VLAN_EGRESS_PRIORITY_CMD 3
+#define GET_VLAN_INGRESS_PRIORITY_CMD 4
+#define GET_VLAN_EGRESS_PRIORITY_CMD 5
+#define SET_VLAN_NAME_TYPE_CMD 6
+#define SET_VLAN_FLAG_CMD 7
+#define GET_VLAN_REALDEV_NAME_CMD 8
+#define GET_VLAN_VID_CMD 9
+
+#define VLAN_NAME_TYPE_PLUS_VID 0
+#define VLAN_NAME_TYPE_RAW_PLUS_VID 1
+#define VLAN_NAME_TYPE_PLUS_VID_NO_PAD 2
+#define VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD 3
+
+struct vlan_ioctl_args {
+ int cmd;
+ char device1[24];
+
+ union {
+ char device2[24];
+ int VID;
+ unsigned int skb_priority;
+ unsigned int name_type;
+ unsigned int bind_type;
+ unsigned int flag;
+ } u;
+
+ short vlan_qos;
+};
+
+#endif /* LINUX_VLAN_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/privsep_commands.h b/ap/app/wpa_supplicant-2.6/src/common/privsep_commands.h
new file mode 100755
index 0000000..8dff303
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/privsep_commands.h
@@ -0,0 +1,104 @@
+/*
+ * WPA Supplicant - privilege separation commands
+ * Copyright (c) 2007-2009, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef PRIVSEP_COMMANDS_H
+#define PRIVSEP_COMMANDS_H
+
+#include "common/ieee802_11_defs.h"
+
+enum privsep_cmd {
+ PRIVSEP_CMD_REGISTER,
+ PRIVSEP_CMD_UNREGISTER,
+ PRIVSEP_CMD_SCAN,
+ PRIVSEP_CMD_GET_SCAN_RESULTS,
+ PRIVSEP_CMD_ASSOCIATE,
+ PRIVSEP_CMD_GET_BSSID,
+ PRIVSEP_CMD_GET_SSID,
+ PRIVSEP_CMD_SET_KEY,
+ PRIVSEP_CMD_GET_CAPA,
+ PRIVSEP_CMD_L2_REGISTER,
+ PRIVSEP_CMD_L2_UNREGISTER,
+ PRIVSEP_CMD_L2_NOTIFY_AUTH_START,
+ PRIVSEP_CMD_L2_SEND,
+ PRIVSEP_CMD_SET_COUNTRY,
+ PRIVSEP_CMD_AUTHENTICATE,
+};
+
+struct privsep_cmd_authenticate
+{
+ int freq;
+ u8 bssid[ETH_ALEN];
+ u8 ssid[SSID_MAX_LEN];
+ size_t ssid_len;
+ int auth_alg;
+ size_t ie_len;
+ u8 wep_key[4][16];
+ size_t wep_key_len[4];
+ int wep_tx_keyidx;
+ int local_state_change;
+ int p2p;
+ size_t sae_data_len;
+ /* followed by ie_len bytes of ie */
+ /* followed by sae_data_len bytes of sae_data */
+};
+
+struct privsep_cmd_associate
+{
+ u8 bssid[ETH_ALEN];
+ u8 ssid[SSID_MAX_LEN];
+ size_t ssid_len;
+ int hwmode;
+ int freq;
+ int channel;
+ int pairwise_suite;
+ int group_suite;
+ int key_mgmt_suite;
+ int auth_alg;
+ int mode;
+ size_t wpa_ie_len;
+ /* followed by wpa_ie_len bytes of wpa_ie */
+};
+
+struct privsep_cmd_set_key
+{
+ int alg;
+ u8 addr[ETH_ALEN];
+ int key_idx;
+ int set_tx;
+ u8 seq[8];
+ size_t seq_len;
+ u8 key[32];
+ size_t key_len;
+};
+
+enum privsep_event {
+ PRIVSEP_EVENT_SCAN_RESULTS,
+ PRIVSEP_EVENT_ASSOC,
+ PRIVSEP_EVENT_DISASSOC,
+ PRIVSEP_EVENT_ASSOCINFO,
+ PRIVSEP_EVENT_MICHAEL_MIC_FAILURE,
+ PRIVSEP_EVENT_INTERFACE_STATUS,
+ PRIVSEP_EVENT_PMKID_CANDIDATE,
+ PRIVSEP_EVENT_STKSTART,
+ PRIVSEP_EVENT_FT_RESPONSE,
+ PRIVSEP_EVENT_RX_EAPOL,
+ PRIVSEP_EVENT_SCAN_STARTED,
+ PRIVSEP_EVENT_AUTH,
+};
+
+struct privsep_event_auth {
+ u8 peer[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ u16 auth_type;
+ u16 auth_transaction;
+ u16 status_code;
+ size_t ies_len;
+ /* followed by ies_len bytes of ies */
+};
+
+#endif /* PRIVSEP_COMMANDS_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/qca-vendor-attr.h b/ap/app/wpa_supplicant-2.6/src/common/qca-vendor-attr.h
new file mode 100755
index 0000000..6f51803
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/qca-vendor-attr.h
@@ -0,0 +1,28 @@
+/*
+ * Qualcomm Atheros vendor specific attribute definitions
+ * Copyright (c) 2014, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef QCA_VENDOR_ATTR_H
+#define QCA_VENDOR_ATTR_H
+
+/*
+ * This file defines some of the attributes used with Qualcomm Atheros OUI
+ * 00:13:74 in a way that is not suitable for qca-vendor.h, e.g., due to
+ * compiler dependencies.
+ */
+
+struct qca_avoid_freq_range {
+ u32 start_freq;
+ u32 end_freq;
+} __attribute__ ((packed));
+
+struct qca_avoid_freq_list {
+ u32 count;
+ struct qca_avoid_freq_range range[0];
+} __attribute__ ((packed));
+
+#endif /* QCA_VENDOR_ATTR_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/qca-vendor.h b/ap/app/wpa_supplicant-2.6/src/common/qca-vendor.h
new file mode 100755
index 0000000..adaec89
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/qca-vendor.h
@@ -0,0 +1,1590 @@
+/*
+ * Qualcomm Atheros OUI and vendor specific assignments
+ * Copyright (c) 2014-2015, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef QCA_VENDOR_H
+#define QCA_VENDOR_H
+
+/*
+ * This file is a registry of identifier assignments from the Qualcomm Atheros
+ * OUI 00:13:74 for purposes other than MAC address assignment. New identifiers
+ * can be assigned through normal review process for changes to the upstream
+ * hostap.git repository.
+ */
+
+#define OUI_QCA 0x001374
+
+/**
+ * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
+ */
+enum qca_radiotap_vendor_ids {
+ QCA_RADIOTAP_VID_WLANTEST = 0,
+};
+
+/**
+ * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use
+ * internal BSS-selection. This command uses
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy
+ * for the current connection (i.e., changes policy set by the nl80211
+ * Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be
+ * included to indicate which BSS to use in case roaming is disabled.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency
+ * ranges to avoid to reduce issues due to interference or internal
+ * co-existence information in the driver. The event data structure is
+ * defined in struct qca_avoid_freq_list.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support
+ * for DFS offloading.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
+ * NAN Request/Response and NAN Indication messages. These messages are
+ * interpreted between the framework and the firmware component.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
+ * used to configure PMK to the driver even when not connected. This can
+ * be used to request offloading of key management operations. Only used
+ * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of
+ * NL80211_CMD_ROAM event with optional attributes including information
+ * from offloaded key management operation. Uses
+ * enum qca_wlan_vendor_attr_roam_auth attributes. Only used
+ * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
+ * invoke the ACS function in device and pass selected channels to
+ * hostapd.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
+ * supported by the driver. enum qca_wlan_vendor_features defines
+ * the possible features.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
+ * which supports DFS offloading, to indicate a channel availability check
+ * start.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
+ * which supports DFS offloading, to indicate a channel availability check
+ * completion.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
+ * which supports DFS offloading, to indicate that the channel availability
+ * check aborted, no change to the channel status.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
+ * driver, which supports DFS offloading, to indicate that the
+ * Non-Occupancy Period for this channel is over, channel becomes usable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
+ * which supports DFS offloading, to indicate a radar pattern has been
+ * detected. The channel is now unusable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
+ * start the P2P Listen offload function in device and pass the listen
+ * channel, period, interval, count, device types, and vendor specific
+ * information elements to the device driver and firmware.
+ * Uses the attributes defines in
+ * enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to
+ * indicate stop request/response of the P2P Listen offload function in
+ * device. As an event, it indicates either the feature stopped after it
+ * was already running or feature has actually failed to start. Uses the
+ * attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts
+ * beaconing, this sub command provides the driver, the frequencies on the
+ * 5 GHz band to check for any radar activity. Driver selects one channel
+ * from this priority list provided through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts
+ * to check for radar activity on it. If no radar activity is detected
+ * during the channel availability check period, driver internally switches
+ * to the selected frequency of operation. If the frequency is zero, driver
+ * internally selects a channel. The status of this conditional switch is
+ * indicated through an event using the same sub command through
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are
+ * listed in qca_wlan_vendor_attr_sap_conditional_chan_switch.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND: Set GPIO pins. This uses the
+ * attributes defined in enum qca_wlan_gpio_attr.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY: Fetch hardware capabilities.
+ * This uses @QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY to indicate which
+ * capabilities are to be fetched and other
+ * enum qca_wlan_vendor_attr_get_hw_capability attributes to return the
+ * requested capabilities.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension.
+ * enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this
+ * command and event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA: Get capabilities for
+ * indoor location features. Capabilities are reported in
+ * QCA_WLAN_VENDOR_ATTR_LOC_CAPA.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION: Start an FTM
+ * (fine timing measurement) session with one or more peers.
+ * Specify Session cookie in QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE and
+ * peer information in QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS.
+ * On success, 0 or more QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT
+ * events will be reported, followed by
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE event to indicate
+ * end of session.
+ * Refer to IEEE P802.11-REVmc/D7.0, 11.24.6
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION: Abort a running session.
+ * A QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE will be reported with
+ * status code indicating session was aborted.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT: Event with measurement
+ * results for one peer. Results are reported in
+ * QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE: Event triggered when
+ * FTM session is finished, either successfully or aborted by
+ * request.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER: Configure FTM responder
+ * mode. QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE specifies whether
+ * to enable or disable the responder. LCI/LCR reports can be
+ * configured with QCA_WLAN_VENDOR_ATTR_FTM_LCI and
+ * QCA_WLAN_VENDOR_ATTR_FTM_LCR. Can be called multiple
+ * times to update the LCI/LCR reports.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS: Perform a standalone AOA (angle of
+ * arrival) measurement with a single peer. Specify peer MAC address in
+ * QCA_WLAN_VENDOR_ATTR_MAC_ADDR and measurement type in
+ * QCA_WLAN_VENDOR_ATTR_AOA_TYPE. Measurement result is reported in
+ * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS: Abort an AOA measurement. Specify
+ * peer MAC address in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT: Event that reports
+ * the AOA measurement result.
+ * Peer MAC address reported in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
+ * success/failure status is reported in
+ * QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS.
+ * Measurement data is reported in QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
+ * The antenna array(s) used in the measurement are reported in
+ * QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST: Encrypt/decrypt the given
+ * data as per the given parameters.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI: Get antenna RSSI value for a
+ * specific chain.
+ */
+enum qca_nl80211_vendor_subcmds {
+ QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
+ QCA_NL80211_VENDOR_SUBCMD_TEST = 1,
+ /* subcmds 2..8 not yet allocated */
+ QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9,
+ QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11,
+ QCA_NL80211_VENDOR_SUBCMD_NAN = 12,
+ QCA_NL80211_VENDOR_SUBMCD_STATS_EXT = 13,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36,
+ QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37,
+ QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38,
+ QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39,
+ QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40,
+ QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41,
+ QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42,
+ /* 43..49 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
+ QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
+ QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
+ /* 53 - reserved - was used by QCA, but not in use anymore */
+ QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
+ QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
+ QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
+ /* 61-73 - reserved for QCA */
+ /* Wi-Fi configuration subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74,
+ QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75,
+ /* 76-90 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
+ QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
+ QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
+ QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
+ QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
+ QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
+ QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
+ QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
+ QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106,
+ QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107,
+ QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108,
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109,
+ /* 110..114 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115,
+ /* 116..117 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118,
+ QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
+ QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
+ /* 121 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122,
+ QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123,
+ QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124,
+ QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125,
+ QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126,
+ QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127,
+ /* FTM/indoor location subcommands */
+ QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132,
+ QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133,
+ QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134,
+ QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135,
+ QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136,
+ QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137,
+ QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138,
+};
+
+
+enum qca_wlan_vendor_attr {
+ QCA_WLAN_VENDOR_ATTR_INVALID = 0,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
+ QCA_WLAN_VENDOR_ATTR_DFS = 1,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */
+ QCA_WLAN_VENDOR_ATTR_NAN = 2,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
+ QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
+ QCA_WLAN_VENDOR_ATTR_IFINDEX = 4,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined
+ * by enum qca_roaming_policy. */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
+ QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
+ QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
+ QCA_WLAN_VENDOR_ATTR_TEST = 8,
+ /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
+ /* Unsigned 32-bit value. */
+ QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
+ /* Unsigned 32-bit value */
+ QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
+ /* Unsigned 32-bit value from enum qca_set_band. */
+ QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
+ /* Dummy (NOP) attribute for 64 bit padding */
+ QCA_WLAN_VENDOR_ATTR_PAD = 13,
+ /* Unique FTM session cookie (Unsigned 64 bit). Specified in
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in
+ * the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14,
+ /* Indoor location capabilities, returned by
+ * QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA.
+ * see enum qca_wlan_vendor_attr_loc_capa.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15,
+ /* Array of nested attributes containing information about each peer
+ * in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info
+ * for supported attributes for each peer.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16,
+ /* Array of nested attributes containing measurement results for
+ * one or more peers, reported by the
+ * QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event.
+ * See enum qca_wlan_vendor_attr_peer_result for list of supported
+ * attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17,
+ /* Flag attribute for enabling or disabling responder functionality. */
+ QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18,
+ /* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
+ * command to specify the LCI report that will be sent by
+ * the responder during a measurement exchange. The format is
+ * defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19,
+ /* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
+ * command to specify the location civic report that will
+ * be sent by the responder during a measurement exchange.
+ * The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20,
+ /* Session/measurement completion status code,
+ * reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and
+ * QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT
+ * see enum qca_vendor_attr_loc_session_status.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21,
+ /* Initial dialog token used by responder (0 if not specified),
+ * unsigned 8 bit value.
+ */
+ QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22,
+ /* AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS
+ * and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if
+ * AOA measurements are needed as part of an FTM session.
+ * Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See
+ * enum qca_wlan_vendor_attr_aoa_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23,
+ /* A bit mask (unsigned 32 bit value) of antenna arrays used
+ * by indoor location measurements. Refers to the antenna
+ * arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS.
+ */
+ QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24,
+ /* AOA measurement data. Its contents depends on the AOA measurement
+ * type and antenna array mask:
+ * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values,
+ * phase of the strongest CIR path for each antenna in the measured
+ * array(s).
+ * QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16
+ * values, phase and amplitude of the strongest CIR path for each
+ * antenna in the measured array(s).
+ */
+ QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
+ * to specify the chain number (unsigned 32 bit value) to inquire
+ * the corresponding antenna RSSI value */
+ QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
+ * to report the specific antenna RSSI value (unsigned 32 bit value) */
+ QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
+};
+
+
+enum qca_roaming_policy {
+ QCA_ROAMING_NOT_ALLOWED,
+ QCA_ROAMING_ALLOWED_WITHIN_ESS,
+};
+
+enum qca_wlan_vendor_attr_roam_auth {
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
+};
+
+enum qca_wlan_vendor_attr_p2p_listen_offload {
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0,
+ /* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one
+ * of the social channels.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
+ /* A 32-bit unsigned value; the P2P listen offload period (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
+ /* A 32-bit unsigned value; the P2P listen interval duration (ms).
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
+ /* A 32-bit unsigned value; number of interval times the firmware needs
+ * to run the offloaded P2P listen operation before it stops.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
+ /* An array of arbitrary binary data with one or more 8-byte values.
+ * The device types include both primary and secondary device types.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
+ /* An array of unsigned 8-bit characters; vendor information elements.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
+ /* A 32-bit unsigned value; a control flag to indicate whether listen
+ * results need to be flushed to wpa_supplicant.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG,
+ /* A 8-bit unsigned value; reason code for P2P listen offload stop
+ * event.
+ */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX =
+ QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
+};
+
+enum qca_wlan_vendor_attr_acs_offload {
+ QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
+ QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
+ QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ACS_MAX =
+ QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
+};
+
+enum qca_wlan_vendor_acs_hw_mode {
+ QCA_ACS_MODE_IEEE80211B,
+ QCA_ACS_MODE_IEEE80211G,
+ QCA_ACS_MODE_IEEE80211A,
+ QCA_ACS_MODE_IEEE80211AD,
+ QCA_ACS_MODE_IEEE80211ANY,
+};
+
+/**
+ * enum qca_wlan_vendor_features - Vendor device/driver feature flags
+ *
+ * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
+ * management offload, a mechanism where the station's firmware
+ * does the exchange with the AP to establish the temporal keys
+ * after roaming, rather than having the user space wpa_supplicant do it.
+ * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
+ * band selection based on channel selection results.
+ * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
+ * simultaneous off-channel operations.
+ * @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
+ * Listen offload; a mechanism where the station's firmware takes care of
+ * responding to incoming Probe Request frames received from other P2P
+ * Devices whilst in Listen state, rather than having the user space
+ * wpa_supplicant do it. Information from received P2P requests are
+ * forwarded from firmware to host whenever the host processor wakes up.
+ * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
+ */
+enum qca_wlan_vendor_features {
+ QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0,
+ QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1,
+ QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2,
+ QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3,
+ NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
+};
+
+/**
+ * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
+ * the offloaded data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
+ * data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
+ * indication.
+ */
+enum qca_wlan_vendor_attr_data_offload_ind {
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
+ QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
+};
+
+enum qca_vendor_attr_get_preferred_freq_list {
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
+ /* A 32-unsigned value; the interface type/mode for which the preferred
+ * frequency list is requested (see enum qca_iface_type for possible
+ * values); used in GET_PREFERRED_FREQ_LIST command from user-space to
+ * kernel and in the kernel response back to user-space.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
+ /* An array of 32-unsigned values; values are frequency (MHz); sent
+ * from kernel space to user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
+};
+
+enum qca_vendor_attr_probable_oper_channel {
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
+ /* 32-bit unsigned value; indicates the connection/iface type likely to
+ * come on this channel (see enum qca_iface_type).
+ */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
+ /* 32-bit unsigned value; the frequency (MHz) of the probable channel */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
+ QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
+};
+
+enum qca_iface_type {
+ QCA_IFACE_TYPE_STA,
+ QCA_IFACE_TYPE_AP,
+ QCA_IFACE_TYPE_P2P_CLIENT,
+ QCA_IFACE_TYPE_P2P_GO,
+ QCA_IFACE_TYPE_IBSS,
+ QCA_IFACE_TYPE_TDLS,
+};
+
+enum qca_set_band {
+ QCA_SETBAND_AUTO,
+ QCA_SETBAND_5G,
+ QCA_SETBAND_2G,
+};
+
+/**
+ * enum qca_access_policy - Access control policy
+ *
+ * Access control policy is applied on the configured IE
+ * (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE).
+ * To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY.
+ *
+ * @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi connections which match
+ * the specific configuration (IE) set, i.e., allow all the
+ * connections which do not match the configuration.
+ * @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi connections which match
+ * the specific configuration (IE) set, i.e., deny all the
+ * connections which do not match the configuration.
+ */
+enum qca_access_policy {
+ QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED,
+ QCA_ACCESS_POLICY_DENY_UNLESS_LISTED,
+};
+
+/**
+ * enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture
+ * @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32)
+ * @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value
+ * @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized
+ * SOC timer value at TSF capture
+ */
+enum qca_vendor_attr_tsf_cmd {
+ QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TSF_CMD,
+ QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE,
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TSF_MAX =
+ QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_tsf_operation: TSF driver commands
+ * @QCA_TSF_CAPTURE: Initiate TSF Capture
+ * @QCA_TSF_GET: Get TSF capture value
+ * @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value
+ */
+enum qca_tsf_cmd {
+ QCA_TSF_CAPTURE,
+ QCA_TSF_GET,
+ QCA_TSF_SYNC_GET,
+};
+
+/**
+ * enum qca_vendor_attr_wisa_cmd
+ * @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value (u32)
+ * WISA setup vendor commands
+ */
+enum qca_vendor_attr_wisa_cmd {
+ QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_WISA_MODE,
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_WISA_MAX =
+ QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1
+};
+
+/* IEEE 802.11 Vendor Specific elements */
+
+/**
+ * enum qca_vendor_element_id - QCA Vendor Specific element types
+ *
+ * These values are used to identify QCA Vendor Specific elements. The
+ * payload of the element starts with the three octet OUI (OUI_QCA) and
+ * is followed by a single octet type which is defined by this enum.
+ *
+ * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list.
+ * This element can be used to specify preference order for supported
+ * channels. The channels in this list are in preference order (the first
+ * one has the highest preference) and are described as a pair of
+ * (global) Operating Class and Channel Number (each one octet) fields.
+ *
+ * This extends the standard P2P functionality by providing option to have
+ * more than one preferred operating channel. When this element is present,
+ * it replaces the preference indicated in the Operating Channel attribute.
+ * For supporting other implementations, the Operating Channel attribute is
+ * expected to be used with the highest preference channel. Similarly, all
+ * the channels included in this Preferred channel list element are
+ * expected to be included in the Channel List attribute.
+ *
+ * This vendor element may be included in GO Negotiation Request, P2P
+ * Invitation Request, and Provision Discovery Request frames.
+ *
+ * @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID. The payload of this
+ * vendor specific element is defined by the latest P802.11ax draft.
+ * Please note that the draft is still work in progress and this element
+ * payload is subject to change.
+ *
+ * @QCA_VENDOR_ELEM_HE_OPER: HE Operation element.
+ * This element can be used for pre-standard publication testing of HE
+ * before P802.11ax draft assigns the element ID. The payload of this
+ * vendor specific element is defined by the latest P802.11ax draft.
+ * Please note that the draft is still work in progress and this element
+ * payload is subject to change.
+ */
+enum qca_vendor_element_id {
+ QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
+ QCA_VENDOR_ELEM_HE_CAPAB = 1,
+ QCA_VENDOR_ELEM_HE_OPER = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes
+ * with frequencies to be scanned (in MHz)
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported
+ * rates to be included
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests
+ * at non CCK rate in 2GHz band
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the
+ * driver for the specific scan request
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan
+ * request decoded as in enum scan_status
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation
+ * scan flag is set
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with
+ * randomisation
+ */
+enum qca_wlan_vendor_attr_scan {
+ QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0,
+ QCA_WLAN_VENDOR_ATTR_SCAN_IE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES,
+ QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE,
+ QCA_WLAN_VENDOR_ATTR_SCAN_STATUS,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK,
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SCAN_MAX =
+ QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1
+};
+
+/**
+ * enum scan_status - Specifies the valid values the vendor scan attribute
+ * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
+ *
+ * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with
+ * new scan results
+ * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between
+ */
+enum scan_status {
+ VENDOR_SCAN_STATUS_NEW_RESULTS,
+ VENDOR_SCAN_STATUS_ABORTED,
+ VENDOR_SCAN_STATUS_MAX,
+};
+
+/**
+ * enum qca_vendor_attr_ota_test - Specifies the values for vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST
+ * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test
+ */
+enum qca_vendor_attr_ota_test {
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID,
+ /* 8-bit unsigned value to indicate if OTA test is enabled */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX =
+ QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_txpower_scale - vendor sub commands index
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value
+ */
+enum qca_vendor_attr_txpower_scale {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID,
+ /* 8-bit unsigned value to indicate the scaling of tx power */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease
+ *
+ * These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB.
+ */
+enum qca_vendor_attr_txpower_decr_db {
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID,
+ /* 8-bit unsigned value to indicate the reduction of TX power in dB for
+ * a virtual interface. */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX =
+ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1
+};
+
+/* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
+ * QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands.
+ */
+enum qca_wlan_vendor_attr_config {
+ QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0,
+ /* Unsigned 32-bit value to set the DTIM period.
+ * Whether the wifi chipset wakes at every dtim beacon or a multiple of
+ * the DTIM period. If DTIM is set to 3, the STA shall wake up every 3
+ * DTIM beacons.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM = 1,
+ /* Unsigned 32-bit value to set the wifi_iface stats averaging factor
+ * used to calculate statistics like average the TSF offset or average
+ * number of frame leaked.
+ * For instance, upon Beacon frame reception:
+ * current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000
+ * For instance, when evaluating leaky APs:
+ * current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2,
+ /* Unsigned 32-bit value to configure guard time, i.e., when
+ * implementing IEEE power management based on frame control PM bit, how
+ * long the driver waits before shutting down the radio and after
+ * receiving an ACK frame for a Data frame with PM bit set.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3,
+ /* Unsigned 32-bit value to change the FTM capability dynamically */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4,
+ /* Unsigned 16-bit value to configure maximum TX rate dynamically */
+ QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5,
+ /* Unsigned 32-bit value to configure the number of continuous
+ * Beacon Miss which shall be used by the firmware to penalize
+ * the RSSI.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6,
+ /* Unsigned 8-bit value to configure the channel avoidance indication
+ * behavior. Firmware to send only one indication and ignore duplicate
+ * indications when set to avoid multiple Apps wakeups.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7,
+ /* 8-bit unsigned value to configure the maximum TX MPDU for
+ * aggregation. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8,
+ /* 8-bit unsigned value to configure the maximum RX MPDU for
+ * aggregation. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9,
+ /* 8-bit unsigned value to configure the Non aggregrate/11g sw
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10,
+ /* 8-bit unsigned value to configure the aggregrate sw
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11,
+ /* 8-bit unsigned value to configure the MGMT frame
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12,
+ /* 8-bit unsigned value to configure the CTRL frame
+ * retry threshold (0 disable, 31 max). */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13,
+ /* 8-bit unsigned value to configure the propagation delay for
+ * 2G/5G band (0~63, units in us) */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14,
+ /* Unsigned 32-bit value to configure the number of unicast TX fail
+ * packet count. The peer is disconnected once this threshold is
+ * reached. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15,
+ /* Attribute used to set scan default IEs to the driver.
+ *
+ * These IEs can be used by scan operations that will be initiated by
+ * the driver/firmware.
+ *
+ * For further scan requests coming to the driver, these IEs should be
+ * merged with the IEs received along with scan request coming to the
+ * driver. If a particular IE is present in the scan default IEs but not
+ * present in the scan request, then that IE should be added to the IEs
+ * sent in the Probe Request frames for that scan request. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16,
+ /* Unsigned 32-bit attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17,
+ /* Unsigned 32-bit value attribute for generic commands */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18,
+ /* Unsigned 32-bit data attribute for generic command response */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19,
+ /* Unsigned 32-bit length attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20,
+ /* Unsigned 32-bit flags attribute for
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21,
+ /* Unsigned 32-bit, defining the access policy.
+ * See enum qca_access_policy. Used with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22,
+ /* Sets the list of full set of IEs for which a specific access policy
+ * has to be applied. Used along with
+ * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
+ * Zero length payload can be used to clear this access constraint. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23,
+ /* Unsigned 32-bit, specifies the interface index (netdev) for which the
+ * corresponding configurations are applied. If the interface index is
+ * not specified, the configurations are attributed to the respective
+ * wiphy. */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24,
+ /* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25,
+ /* 8-bit unsigned value to configure the driver and below layers to
+ * ignore the assoc disallowed set by APs while connecting
+ * 1-Ignore, 0-Don't ignore */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26,
+ /* 32-bit unsigned value to trigger antenna diversity features:
+ * 1-Enable, 0-Disable */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27,
+ /* 32-bit unsigned value to configure specific chain antenna */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28,
+ /* 32-bit unsigned value to trigger cycle selftest
+ * 1-Enable, 0-Disable */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29,
+ /* 32-bit unsigned to configure the cycle time of selftest
+ * the unit is micro-second */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration
+ */
+enum qca_wlan_vendor_attr_sap_config {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0,
+ /* 1 - reserved for QCA */
+ /* List of frequencies on which AP is expected to operate.
+ * This is irrespective of ACS configuration. This list is a priority
+ * based one and is looked for before the AP is created to ensure the
+ * best concurrency sessions (avoid MCC and use DBS/SCC) co-exist in
+ * the system.
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2,
+
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP
+ * conditional channel switch
+ */
+enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
+ /* Priority based frequency list (an array of u32 values in host byte
+ * order) */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
+ /* Status of the conditional switch (u32).
+ * 0: Success, Non-zero: Failure
+ */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2,
+
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX =
+ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_gpio_attr - Parameters for GPIO configuration
+ */
+enum qca_wlan_gpio_attr {
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
+ /* Unsigned 32-bit attribute for GPIO command */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND,
+ /* Unsigned 32-bit attribute for GPIO PIN number to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM,
+ /* Unsigned 32-bit attribute for GPIO value to configure */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE,
+ /* Unsigned 32-bit attribute for GPIO pull type */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE,
+ /* Unsigned 32-bit attribute for GPIO interrupt mode */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability
+ */
+enum qca_wlan_vendor_attr_get_hw_capability {
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID,
+ /* Antenna isolation
+ * An attribute used in the response.
+ * The content of this attribute is encoded in a byte array. Each byte
+ * value is an antenna isolation value. The array length is the number
+ * of antennas.
+ */
+ QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION,
+ /* Request HW capability
+ * An attribute used in the request.
+ * The content of this attribute is a u32 array for one or more of
+ * hardware capabilities (attribute IDs) that are being requested. Each
+ * u32 value has a value from this
+ * enum qca_wlan_vendor_attr_get_hw_capability
+ * identifying which capabilities are requested.
+ */
+ QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX =
+ QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring
+ * offload which is an extension for LL_STATS.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms.
+ * If MAC counters do not exceed the threshold, FW will report monitored
+ * link layer counters periodically as this setting. The first report is
+ * always triggered by this timer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99).
+ * For each MAC layer counter, FW holds two copies. One is the current value.
+ * The other is the last report. Once a current counter's increment is larger
+ * than the threshold, FW will indicate that counter to host even if the
+ * monitoring timer does not expire.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same
+ * failure code.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code
+ * 1: TX packet discarded
+ * 2: No ACK
+ * 3: Postpone
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold.
+ * Threshold for all monitored parameters. If per counter dedicated threshold
+ * is not enabled, this threshold will take effect.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this
+ * event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters
+ * Bit0: TX counter unit in MSDU
+ * Bit1: TX counter unit in MPDU
+ * Bit2: TX counter unit in PPDU
+ * Bit3: TX counter unit in byte
+ * Bit4: Dropped MSDUs
+ * Bit5: Dropped Bytes
+ * Bit6: MPDU retry counter
+ * Bit7: MPDU failure counter
+ * Bit8: PPDU failure counter
+ * Bit9: MPDU aggregation counter
+ * Bit10: MCS counter for ACKed MPDUs
+ * Bit11: MCS counter for Failed MPDUs
+ * Bit12: TX Delay counter
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters
+ * Bit0: MAC RX counter unit in MPDU
+ * Bit1: MAC RX counter unit in byte
+ * Bit2: PHY RX counter unit in PPDU
+ * Bit3: PHY RX counter unit in byte
+ * Bit4: Disorder counter
+ * Bit5: Retry counter
+ * Bit6: Duplication counter
+ * Bit7: Discard counter
+ * Bit8: MPDU aggregation size counter
+ * Bit9: MCS counter
+ * Bit10: Peer STA power state change (wake to sleep) counter
+ * Bit11: Peer STA power save counter, total time in PS mode
+ * Bit12: Probe request counter
+ * Bit13: Other management frames counter
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA
+ * Bit0: Idle time
+ * Bit1: TX time
+ * Bit2: time RX in current bss
+ * Bit3: Out of current bss time
+ * Bit4: Wireless medium busy time
+ * Bit5: RX in bad condition time
+ * Bit6: TX in bad condition time
+ * Bit7: time wlan card not available
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal
+ * Bit0: Per channel SNR counter
+ * Bit1: Per channel noise floor counter
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM:
+ * aggregation stats buffer length
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats
+ * buffer for ACKed MPDUs.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats
+ * buffer for failed MPDUs.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE:
+ * length of delay stats array.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets
+ * flagged as retransmissions
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets
+ * flagged as duplicated
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX
+ * packets discarded
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation
+ * stats buffer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs
+ * stats buffer.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe
+ * requests received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt
+ * frames received
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time
+ * there is no TX, nor RX, nor interference.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time
+ * transmitting packets.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time
+ * for receiving.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time
+ * interference detected.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time
+ * receiving packets with errors.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time
+ * TX no-ACK.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time
+ * the chip is unable to work in normal conditions.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time
+ * receiving packets in current BSS.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time
+ * receiving packets not in current BSS.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL:
+ * This is a container for per antenna signal stats.
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon
+ * @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon
+ */
+enum qca_wlan_vendor_attr_ll_stats_ext {
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0,
+
+ /* Attributes for configurations */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD,
+
+ /* Peer STA power state change */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG,
+
+ /* TX failure event */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS,
+
+ /* MAC counters */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER,
+
+ /* Sub-attributes for PEER_AC_TX */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY,
+
+ /* Sub-attributes for PEER_AC_RX */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT,
+
+ /* Sub-attributes for CCA_BSS */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL,
+
+ /* sub-attribute for BSS_RX_TIME */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME,
+
+ /* Sub-attributes for PEER_SIGNAL */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF,
+
+ /* Sub-attributes for IFACE_BSS */
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON,
+
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST,
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX =
+ QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1
+};
+
+/* Attributes for FTM commands and events */
+
+/**
+ * enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See
+ * enum qca_wlan_vendor_attr_loc_capa_flags.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number
+ * of measurement sessions that can run concurrently.
+ * Default is one session (no session concurrency).
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique
+ * peers that are supported in running sessions. For example,
+ * if the value is 8 and maximum number of sessions is 2, you can
+ * have one session with 8 unique peers, or 2 sessions with 4 unique
+ * peers each, and so on.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number
+ * of bursts per peer, as an exponent (2^value). Default is 0,
+ * meaning no multi-burst support.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number
+ * of measurement exchanges allowed in a single burst.
+ * @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement
+ * types. A bit mask (unsigned 32 bit value), each bit corresponds
+ * to an AOA type as defined by enum qca_vendor_attr_aoa_type.
+ */
+enum qca_wlan_vendor_attr_loc_capa {
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP,
+ QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST,
+ QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX =
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver
+ * can be configured as an FTM responder (for example, an AP that
+ * services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
+ * will be supported if set.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver
+ * can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION
+ * will be supported if set.
+* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder
+ * supports immediate (ASAP) response.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone
+ * AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports
+ * requesting AOA measurements as part of an FTM session.
+ */
+enum qca_wlan_vendor_attr_loc_capa_flags {
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3,
+ QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_info: Information about
+ * a single peer in a measurement session.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related
+ * to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of
+ * FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0
+ * 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for
+ * list of supported attributes.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for
+ * secure measurement.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA
+ * measurement every <value> bursts. If 0 or not specified,
+ * AOA measurements will be disabled for this peer.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_info {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags,
+ * per-peer
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request
+ * immediate (ASAP) response from peer.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request
+ * LCI report from peer. The LCI report includes the absolute
+ * location of the peer in "official" coordinates (similar to GPS).
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request
+ * Location civic report from peer. The LCR includes the location
+ * of the peer in free-form format. See IEEE P802.11-REVmc/D7.0,
+ * 11.24.6.7 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set,
+ * request a secure measurement.
+ * QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_meas_flags {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements
+ * to perform in a single burst.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to
+ * perform, specified as an exponent (2^value).
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst
+ * instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts,
+ * as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must
+ * be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION.
+ */
+enum qca_wlan_vendor_attr_ftm_meas_param {
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported
+ * peer.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement
+ * request for this peer.
+ * See enum qca_wlan_vendor_attr_ftm_peer_result_status.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related
+ * to measurement results for this peer.
+ * See enum qca_wlan_vendor_attr_ftm_peer_result_flags.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when
+ * request failed and peer requested not to send an additional request
+ * for this number of seconds.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received
+ * from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
+ * 9.4.2.22.10.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when
+ * received from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
+ * 9.4.2.22.13.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer
+ * overridden some measurement request parameters. See
+ * enum qca_wlan_vendor_attr_ftm_meas_param.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement
+ * for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement
+ * results. Each entry is a nested attribute defined
+ * by enum qca_wlan_vendor_attr_ftm_meas.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_result {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_result_status
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results
+ * will be provided. Peer may have overridden some measurement parameters,
+ * in which case overridden parameters will be report by
+ * QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable
+ * of performing the measurement request. No more results will be sent
+ * for this peer in this session.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request
+ * failed, and requested not to send an additional request for number
+ * of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS
+ * attribute.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation
+ * failed. Request was not sent over the air.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_result_status {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED,
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags
+ * for measurement result, per-peer
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set,
+ * measurement completed for this peer. No more results will be reported
+ * for this peer in this session.
+ */
+enum qca_wlan_vendor_attr_ftm_peer_result_flags {
+ QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0,
+};
+
+/**
+ * enum qca_vendor_attr_loc_session_status: Session completion status code
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed
+ * successfully.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted
+ * by request.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request
+ * was invalid and was not started.
+ * @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error
+ * and did not complete normally (for example out of resources).
+ */
+enum qca_vendor_attr_loc_session_status {
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK,
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED,
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID,
+ QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_ftm_meas: Single measurement data
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as
+ * recorded by responder, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at
+ * initiator, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by
+ * initiator, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at
+ * responder, in picoseconds.
+ * See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded
+ * during this measurement exchange. Optional and will be provided if
+ * the hardware can measure it.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by
+ * responder. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by
+ * responder. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by
+ * initiator. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by
+ * initiator. Not always provided.
+ * See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
+ * @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding.
+ */
+enum qca_wlan_vendor_attr_ftm_meas {
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX =
+ QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_aoa_type - AOA measurement type
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest
+ * CIR (channel impulse response) path for each antenna.
+ * @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude
+ * of the strongest CIR path for each antenna.
+ */
+enum qca_wlan_vendor_attr_aoa_type {
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE,
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP,
+ QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX
+};
+
+/**
+ * enum qca_wlan_vendor_attr_encryption_test - Attributes to
+ * validate encryption engine
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute.
+ * This will be included if the request is for decryption; if not included,
+ * the request is treated as a request for encryption by default.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value
+ * indicating the key cipher suite. Takes same values as
+ * NL80211_ATTR_KEY_CIPHER.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value
+ * Key Id to be used for encryption
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values.
+ * Key (TK) to be used for encryption/decryption
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values.
+ * Packet number to be specified for encryption/decryption
+ * 6 bytes for TKIP/CCMP/GCMP.
+ * @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values
+ * representing the 802.11 packet (header + payload + FCS) that
+ * needs to be encrypted/decrypted.
+ * Encrypted/decrypted response from the driver will also be sent
+ * to userspace with the same attribute.
+ */
+enum qca_wlan_vendor_attr_encryption_test {
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX =
+ QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1
+};
+
+#endif /* QCA_VENDOR_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/sae.h b/ap/app/wpa_supplicant-2.6/src/common/sae.h
new file mode 100755
index 0000000..a4270bc
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/sae.h
@@ -0,0 +1,71 @@
+/*
+ * Simultaneous authentication of equals
+ * Copyright (c) 2012-2013, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef SAE_H
+#define SAE_H
+
+#define SAE_KCK_LEN 32
+#define SAE_PMK_LEN 32
+#define SAE_PMKID_LEN 16
+#define SAE_KEYSEED_KEY_LEN 32
+#define SAE_MAX_PRIME_LEN 512
+#define SAE_MAX_ECC_PRIME_LEN 66
+#define SAE_COMMIT_MAX_LEN (2 + 3 * SAE_MAX_PRIME_LEN)
+#define SAE_CONFIRM_MAX_LEN (2 + SAE_MAX_PRIME_LEN)
+
+/* Special value returned by sae_parse_commit() */
+#define SAE_SILENTLY_DISCARD 65535
+
+struct sae_temporary_data {
+ u8 kck[SAE_KCK_LEN];
+ struct crypto_bignum *own_commit_scalar;
+ struct crypto_bignum *own_commit_element_ffc;
+ struct crypto_ec_point *own_commit_element_ecc;
+ struct crypto_bignum *peer_commit_element_ffc;
+ struct crypto_ec_point *peer_commit_element_ecc;
+ struct crypto_ec_point *pwe_ecc;
+ struct crypto_bignum *pwe_ffc;
+ struct crypto_bignum *sae_rand;
+ struct crypto_ec *ec;
+ int prime_len;
+ const struct dh_group *dh;
+ const struct crypto_bignum *prime;
+ const struct crypto_bignum *order;
+ struct crypto_bignum *prime_buf;
+ struct crypto_bignum *order_buf;
+ struct wpabuf *anti_clogging_token;
+};
+
+struct sae_data {
+ enum { SAE_NOTHING, SAE_COMMITTED, SAE_CONFIRMED, SAE_ACCEPTED } state;
+ u16 send_confirm;
+ u8 pmk[SAE_PMK_LEN];
+ u8 pmkid[SAE_PMKID_LEN];
+ struct crypto_bignum *peer_commit_scalar;
+ int group;
+ int sync;
+ struct sae_temporary_data *tmp;
+};
+
+int sae_set_group(struct sae_data *sae, int group);
+void sae_clear_temp_data(struct sae_data *sae);
+void sae_clear_data(struct sae_data *sae);
+
+int sae_prepare_commit(const u8 *addr1, const u8 *addr2,
+ const u8 *password, size_t password_len,
+ struct sae_data *sae);
+int sae_process_commit(struct sae_data *sae);
+void sae_write_commit(struct sae_data *sae, struct wpabuf *buf,
+ const struct wpabuf *token);
+u16 sae_parse_commit(struct sae_data *sae, const u8 *data, size_t len,
+ const u8 **token, size_t *token_len, int *allowed_groups);
+void sae_write_confirm(struct sae_data *sae, struct wpabuf *buf);
+int sae_check_confirm(struct sae_data *sae, const u8 *data, size_t len);
+u16 sae_group_allowed(struct sae_data *sae, int *allowed_groups, u16 group);
+
+#endif /* SAE_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/tnc.h b/ap/app/wpa_supplicant-2.6/src/common/tnc.h
new file mode 100755
index 0000000..108acf9
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/tnc.h
@@ -0,0 +1,121 @@
+/*
+ * TNC - Common defines
+ * Copyright (c) 2007-2014, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef TNC_H
+#define TNC_H
+
+typedef unsigned long TNC_UInt32;
+typedef unsigned char *TNC_BufferReference;
+
+typedef TNC_UInt32 TNC_IMVID;
+typedef TNC_UInt32 TNC_IMCID;
+typedef TNC_UInt32 TNC_ConnectionID;
+typedef TNC_UInt32 TNC_ConnectionState;
+typedef TNC_UInt32 TNC_RetryReason;
+typedef TNC_UInt32 TNC_IMV_Action_Recommendation;
+typedef TNC_UInt32 TNC_IMV_Evaluation_Result;
+typedef TNC_UInt32 TNC_MessageType;
+typedef TNC_MessageType *TNC_MessageTypeList;
+typedef TNC_UInt32 TNC_VendorID;
+typedef TNC_UInt32 TNC_Subtype;
+typedef TNC_UInt32 TNC_MessageSubtype;
+typedef TNC_UInt32 TNC_Version;
+typedef TNC_UInt32 TNC_Result;
+typedef TNC_UInt32 TNC_AttributeID;
+
+typedef TNC_Result (*TNC_TNCS_BindFunctionPointer)(
+ TNC_IMVID imvID,
+ char *functionName,
+ void **pOutfunctionPointer);
+typedef TNC_Result (*TNC_TNCS_ReportMessageTypesPointer)(
+ TNC_IMVID imvID,
+ TNC_MessageTypeList supportedTypes,
+ TNC_UInt32 typeCount);
+typedef TNC_Result (*TNC_TNCS_SendMessagePointer)(
+ TNC_IMVID imvID,
+ TNC_ConnectionID connectionID,
+ TNC_BufferReference message,
+ TNC_UInt32 messageLength,
+ TNC_MessageType messageType);
+typedef TNC_Result (*TNC_TNCS_RequestHandshakeRetryPointer)(
+ TNC_IMVID imvID,
+ TNC_ConnectionID connectionID,
+ TNC_RetryReason reason);
+typedef TNC_Result (*TNC_TNCS_ProvideRecommendationPointer)(
+ TNC_IMVID imvID,
+ TNC_ConnectionID connectionID,
+ TNC_IMV_Action_Recommendation recommendation,
+ TNC_IMV_Evaluation_Result evaluation);
+typedef TNC_Result (*TNC_TNCC_BindFunctionPointer)(
+ TNC_IMCID imcID,
+ char *functionName,
+ void **pOutfunctionPointer);
+typedef TNC_Result (*TNC_TNCC_SendMessagePointer)(
+ TNC_IMCID imcID,
+ TNC_ConnectionID connectionID,
+ TNC_BufferReference message,
+ TNC_UInt32 messageLength,
+ TNC_MessageType messageType);
+typedef TNC_Result (*TNC_TNCC_ReportMessageTypesPointer)(
+ TNC_IMCID imcID,
+ TNC_MessageTypeList supportedTypes,
+ TNC_UInt32 typeCount);
+typedef TNC_Result (*TNC_TNCC_RequestHandshakeRetryPointer)(
+ TNC_IMCID imcID,
+ TNC_ConnectionID connectionID,
+ TNC_RetryReason reason);
+
+#define TNC_IFIMV_VERSION_1 1
+#define TNC_IFIMC_VERSION_1 1
+
+#define TNC_RESULT_SUCCESS 0
+#define TNC_RESULT_NOT_INITIALIZED 1
+#define TNC_RESULT_ALREADY_INITIALIZED 2
+#define TNC_RESULT_NO_COMMON_VERSION 3
+#define TNC_RESULT_CANT_RETRY 4
+#define TNC_RESULT_WONT_RETRY 5
+#define TNC_RESULT_INVALID_PARAMETER 6
+#define TNC_RESULT_CANT_RESPOND 7
+#define TNC_RESULT_ILLEGAL_OPERATION 8
+#define TNC_RESULT_OTHER 9
+#define TNC_RESULT_FATAL 10
+
+#define TNC_CONNECTION_STATE_CREATE 0
+#define TNC_CONNECTION_STATE_HANDSHAKE 1
+#define TNC_CONNECTION_STATE_ACCESS_ALLOWED 2
+#define TNC_CONNECTION_STATE_ACCESS_ISOLATED 3
+#define TNC_CONNECTION_STATE_ACCESS_NONE 4
+#define TNC_CONNECTION_STATE_DELETE 5
+
+#define TNC_VENDORID_ANY ((TNC_VendorID) 0xffffff)
+#define TNC_SUBTYPE_ANY ((TNC_Subtype) 0xff)
+
+/* TNCC-TNCS Message Types */
+#define TNC_TNCCS_RECOMMENDATION 0x00000001
+#define TNC_TNCCS_ERROR 0x00000002
+#define TNC_TNCCS_PREFERREDLANGUAGE 0x00000003
+#define TNC_TNCCS_REASONSTRINGS 0x00000004
+
+/* Possible TNC_IMV_Action_Recommendation values: */
+enum IMV_Action_Recommendation {
+ TNC_IMV_ACTION_RECOMMENDATION_ALLOW,
+ TNC_IMV_ACTION_RECOMMENDATION_NO_ACCESS,
+ TNC_IMV_ACTION_RECOMMENDATION_ISOLATE,
+ TNC_IMV_ACTION_RECOMMENDATION_NO_RECOMMENDATION
+};
+
+/* Possible TNC_IMV_Evaluation_Result values: */
+enum IMV_Evaluation_Result {
+ TNC_IMV_EVALUATION_RESULT_COMPLIANT,
+ TNC_IMV_EVALUATION_RESULT_NONCOMPLIANT_MINOR,
+ TNC_IMV_EVALUATION_RESULT_NONCOMPLIANT_MAJOR,
+ TNC_IMV_EVALUATION_RESULT_ERROR,
+ TNC_IMV_EVALUATION_RESULT_DONT_KNOW
+};
+
+#endif /* TNC_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/version.h b/ap/app/wpa_supplicant-2.6/src/common/version.h
new file mode 100755
index 0000000..75e5c6e
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/version.h
@@ -0,0 +1,14 @@
+#ifndef VERSION_H
+#define VERSION_H
+
+#ifndef VERSION_STR_POSTFIX
+#define VERSION_STR_POSTFIX ""
+#endif /* VERSION_STR_POSTFIX */
+
+#ifndef GIT_VERSION_STR_POSTFIX
+#define GIT_VERSION_STR_POSTFIX ""
+#endif /* GIT_VERSION_STR_POSTFIX */
+
+#define VERSION_STR "2.6" VERSION_STR_POSTFIX GIT_VERSION_STR_POSTFIX
+
+#endif /* VERSION_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/wpa_common.h b/ap/app/wpa_supplicant-2.6/src/common/wpa_common.h
new file mode 100755
index 0000000..1021ccb
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/wpa_common.h
@@ -0,0 +1,465 @@
+/*
+ * WPA definitions shared between hostapd and wpa_supplicant
+ * Copyright (c) 2002-2015, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_COMMON_H
+#define WPA_COMMON_H
+
+/* IEEE 802.11i */
+#define PMKID_LEN 16
+#define PMK_LEN 32
+#define PMK_LEN_SUITE_B_192 48
+#define PMK_LEN_MAX 48
+#define WPA_REPLAY_COUNTER_LEN 8
+#define WPA_NONCE_LEN 32
+#define WPA_KEY_RSC_LEN 8
+#define WPA_GMK_LEN 32
+#define WPA_GTK_MAX_LEN 32
+
+#define WPA_ALLOWED_PAIRWISE_CIPHERS \
+(WPA_CIPHER_CCMP | WPA_CIPHER_GCMP | WPA_CIPHER_TKIP | WPA_CIPHER_NONE | \
+WPA_CIPHER_GCMP_256 | WPA_CIPHER_CCMP_256)
+#define WPA_ALLOWED_GROUP_CIPHERS \
+(WPA_CIPHER_CCMP | WPA_CIPHER_GCMP | WPA_CIPHER_TKIP | \
+WPA_CIPHER_GCMP_256 | WPA_CIPHER_CCMP_256 | \
+WPA_CIPHER_GTK_NOT_USED)
+
+#define WPA_SELECTOR_LEN 4
+#define WPA_VERSION 1
+#define RSN_SELECTOR_LEN 4
+#define RSN_VERSION 1
+
+#define RSN_SELECTOR(a, b, c, d) \
+ ((((u32) (a)) << 24) | (((u32) (b)) << 16) | (((u32) (c)) << 8) | \
+ (u32) (d))
+
+#define WPA_AUTH_KEY_MGMT_NONE RSN_SELECTOR(0x00, 0x50, 0xf2, 0)
+#define WPA_AUTH_KEY_MGMT_UNSPEC_802_1X RSN_SELECTOR(0x00, 0x50, 0xf2, 1)
+#define WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X RSN_SELECTOR(0x00, 0x50, 0xf2, 2)
+#define WPA_AUTH_KEY_MGMT_CCKM RSN_SELECTOR(0x00, 0x40, 0x96, 0)
+#define WPA_CIPHER_SUITE_NONE RSN_SELECTOR(0x00, 0x50, 0xf2, 0)
+#define WPA_CIPHER_SUITE_TKIP RSN_SELECTOR(0x00, 0x50, 0xf2, 2)
+#define WPA_CIPHER_SUITE_CCMP RSN_SELECTOR(0x00, 0x50, 0xf2, 4)
+
+
+#define RSN_AUTH_KEY_MGMT_UNSPEC_802_1X RSN_SELECTOR(0x00, 0x0f, 0xac, 1)
+#define RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X RSN_SELECTOR(0x00, 0x0f, 0xac, 2)
+#ifdef CONFIG_IEEE80211R
+#define RSN_AUTH_KEY_MGMT_FT_802_1X RSN_SELECTOR(0x00, 0x0f, 0xac, 3)
+#define RSN_AUTH_KEY_MGMT_FT_PSK RSN_SELECTOR(0x00, 0x0f, 0xac, 4)
+#endif /* CONFIG_IEEE80211R */
+#define RSN_AUTH_KEY_MGMT_802_1X_SHA256 RSN_SELECTOR(0x00, 0x0f, 0xac, 5)
+#define RSN_AUTH_KEY_MGMT_PSK_SHA256 RSN_SELECTOR(0x00, 0x0f, 0xac, 6)
+#define RSN_AUTH_KEY_MGMT_TPK_HANDSHAKE RSN_SELECTOR(0x00, 0x0f, 0xac, 7)
+#define RSN_AUTH_KEY_MGMT_SAE RSN_SELECTOR(0x00, 0x0f, 0xac, 8)
+#define RSN_AUTH_KEY_MGMT_FT_SAE RSN_SELECTOR(0x00, 0x0f, 0xac, 9)
+#define RSN_AUTH_KEY_MGMT_802_1X_SUITE_B RSN_SELECTOR(0x00, 0x0f, 0xac, 11)
+#define RSN_AUTH_KEY_MGMT_802_1X_SUITE_B_192 RSN_SELECTOR(0x00, 0x0f, 0xac, 12)
+#define RSN_AUTH_KEY_MGMT_FT_802_1X_SUITE_B_192 \
+RSN_SELECTOR(0x00, 0x0f, 0xac, 13)
+#define RSN_AUTH_KEY_MGMT_CCKM RSN_SELECTOR(0x00, 0x40, 0x96, 0x00)
+#define RSN_AUTH_KEY_MGMT_OSEN RSN_SELECTOR(0x50, 0x6f, 0x9a, 0x01)
+
+#define RSN_CIPHER_SUITE_NONE RSN_SELECTOR(0x00, 0x0f, 0xac, 0)
+#define RSN_CIPHER_SUITE_TKIP RSN_SELECTOR(0x00, 0x0f, 0xac, 2)
+#if 0
+#define RSN_CIPHER_SUITE_WRAP RSN_SELECTOR(0x00, 0x0f, 0xac, 3)
+#endif
+#define RSN_CIPHER_SUITE_CCMP RSN_SELECTOR(0x00, 0x0f, 0xac, 4)
+#define RSN_CIPHER_SUITE_AES_128_CMAC RSN_SELECTOR(0x00, 0x0f, 0xac, 6)
+#define RSN_CIPHER_SUITE_NO_GROUP_ADDRESSED RSN_SELECTOR(0x00, 0x0f, 0xac, 7)
+#define RSN_CIPHER_SUITE_GCMP RSN_SELECTOR(0x00, 0x0f, 0xac, 8)
+#define RSN_CIPHER_SUITE_GCMP_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 9)
+#define RSN_CIPHER_SUITE_CCMP_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 10)
+#define RSN_CIPHER_SUITE_BIP_GMAC_128 RSN_SELECTOR(0x00, 0x0f, 0xac, 11)
+#define RSN_CIPHER_SUITE_BIP_GMAC_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 12)
+#define RSN_CIPHER_SUITE_BIP_CMAC_256 RSN_SELECTOR(0x00, 0x0f, 0xac, 13)
+
+/* EAPOL-Key Key Data Encapsulation
+ * GroupKey and PeerKey require encryption, otherwise, encryption is optional.
+ */
+#define RSN_KEY_DATA_GROUPKEY RSN_SELECTOR(0x00, 0x0f, 0xac, 1)
+#if 0
+#define RSN_KEY_DATA_STAKEY RSN_SELECTOR(0x00, 0x0f, 0xac, 2)
+#endif
+#define RSN_KEY_DATA_MAC_ADDR RSN_SELECTOR(0x00, 0x0f, 0xac, 3)
+#define RSN_KEY_DATA_PMKID RSN_SELECTOR(0x00, 0x0f, 0xac, 4)
+#ifdef CONFIG_PEERKEY
+#define RSN_KEY_DATA_SMK RSN_SELECTOR(0x00, 0x0f, 0xac, 5)
+#define RSN_KEY_DATA_NONCE RSN_SELECTOR(0x00, 0x0f, 0xac, 6)
+#define RSN_KEY_DATA_LIFETIME RSN_SELECTOR(0x00, 0x0f, 0xac, 7)
+#define RSN_KEY_DATA_ERROR RSN_SELECTOR(0x00, 0x0f, 0xac, 8)
+#endif /* CONFIG_PEERKEY */
+#ifdef CONFIG_IEEE80211W
+#define RSN_KEY_DATA_IGTK RSN_SELECTOR(0x00, 0x0f, 0xac, 9)
+#endif /* CONFIG_IEEE80211W */
+#define RSN_KEY_DATA_KEYID RSN_SELECTOR(0x00, 0x0f, 0xac, 10)
+#define RSN_KEY_DATA_MULTIBAND_GTK RSN_SELECTOR(0x00, 0x0f, 0xac, 11)
+#define RSN_KEY_DATA_MULTIBAND_KEYID RSN_SELECTOR(0x00, 0x0f, 0xac, 12)
+
+#define WFA_KEY_DATA_IP_ADDR_REQ RSN_SELECTOR(0x50, 0x6f, 0x9a, 4)
+#define WFA_KEY_DATA_IP_ADDR_ALLOC RSN_SELECTOR(0x50, 0x6f, 0x9a, 5)
+
+#define WPA_OUI_TYPE RSN_SELECTOR(0x00, 0x50, 0xf2, 1)
+
+#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *) (a), (val))
+#define RSN_SELECTOR_GET(a) WPA_GET_BE32((const u8 *) (a))
+
+#define RSN_NUM_REPLAY_COUNTERS_1 0
+#define RSN_NUM_REPLAY_COUNTERS_2 1
+#define RSN_NUM_REPLAY_COUNTERS_4 2
+#define RSN_NUM_REPLAY_COUNTERS_16 3
+
+
+#ifdef _MSC_VER
+#pragma pack(push, 1)
+#endif /* _MSC_VER */
+
+#ifdef CONFIG_IEEE80211W
+#define WPA_IGTK_LEN 16
+#define WPA_IGTK_MAX_LEN 32
+#endif /* CONFIG_IEEE80211W */
+
+
+/* IEEE 802.11, 7.3.2.25.3 RSN Capabilities */
+#define WPA_CAPABILITY_PREAUTH BIT(0)
+#define WPA_CAPABILITY_NO_PAIRWISE BIT(1)
+/* B2-B3: PTKSA Replay Counter */
+/* B4-B5: GTKSA Replay Counter */
+#define WPA_CAPABILITY_MFPR BIT(6)
+#define WPA_CAPABILITY_MFPC BIT(7)
+/* B8: Reserved */
+#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
+#define WPA_CAPABILITY_SPP_A_MSDU_CAPABLE BIT(10)
+#define WPA_CAPABILITY_SPP_A_MSDU_REQUIRED BIT(11)
+#define WPA_CAPABILITY_PBAC BIT(12)
+#define WPA_CAPABILITY_EXT_KEY_ID_FOR_UNICAST BIT(13)
+/* B14-B15: Reserved */
+
+
+/* IEEE 802.11r */
+#define MOBILITY_DOMAIN_ID_LEN 2
+#define FT_R0KH_ID_MAX_LEN 48
+#define FT_R1KH_ID_LEN 6
+#define WPA_PMK_NAME_LEN 16
+
+
+/* IEEE 802.11, 8.5.2 EAPOL-Key frames */
+#define WPA_KEY_INFO_TYPE_MASK ((u16) (BIT(0) | BIT(1) | BIT(2)))
+#define WPA_KEY_INFO_TYPE_AKM_DEFINED 0
+#define WPA_KEY_INFO_TYPE_HMAC_MD5_RC4 BIT(0)
+#define WPA_KEY_INFO_TYPE_HMAC_SHA1_AES BIT(1)
+#define WPA_KEY_INFO_TYPE_AES_128_CMAC 3
+#define WPA_KEY_INFO_KEY_TYPE BIT(3) /* 1 = Pairwise, 0 = Group key */
+/* bit4..5 is used in WPA, but is reserved in IEEE 802.11i/RSN */
+#define WPA_KEY_INFO_KEY_INDEX_MASK (BIT(4) | BIT(5))
+#define WPA_KEY_INFO_KEY_INDEX_SHIFT 4
+#define WPA_KEY_INFO_INSTALL BIT(6) /* pairwise */
+#define WPA_KEY_INFO_TXRX BIT(6) /* group */
+#define WPA_KEY_INFO_ACK BIT(7)
+#define WPA_KEY_INFO_MIC BIT(8)
+#define WPA_KEY_INFO_SECURE BIT(9)
+#define WPA_KEY_INFO_ERROR BIT(10)
+#define WPA_KEY_INFO_REQUEST BIT(11)
+#define WPA_KEY_INFO_ENCR_KEY_DATA BIT(12) /* IEEE 802.11i/RSN only */
+#define WPA_KEY_INFO_SMK_MESSAGE BIT(13)
+
+
+struct wpa_eapol_key {
+ u8 type;
+ /* Note: key_info, key_length, and key_data_length are unaligned */
+ u8 key_info[2]; /* big endian */
+ u8 key_length[2]; /* big endian */
+ u8 replay_counter[WPA_REPLAY_COUNTER_LEN];
+ u8 key_nonce[WPA_NONCE_LEN];
+ u8 key_iv[16];
+ u8 key_rsc[WPA_KEY_RSC_LEN];
+ u8 key_id[8]; /* Reserved in IEEE 802.11i/RSN */
+ u8 key_mic[16];
+ u8 key_data_length[2]; /* big endian */
+ /* followed by key_data_length bytes of key_data */
+} STRUCT_PACKED;
+
+struct wpa_eapol_key_192 {
+ u8 type;
+ /* Note: key_info, key_length, and key_data_length are unaligned */
+ u8 key_info[2]; /* big endian */
+ u8 key_length[2]; /* big endian */
+ u8 replay_counter[WPA_REPLAY_COUNTER_LEN];
+ u8 key_nonce[WPA_NONCE_LEN];
+ u8 key_iv[16];
+ u8 key_rsc[WPA_KEY_RSC_LEN];
+ u8 key_id[8]; /* Reserved in IEEE 802.11i/RSN */
+ u8 key_mic[24];
+ u8 key_data_length[2]; /* big endian */
+ /* followed by key_data_length bytes of key_data */
+} STRUCT_PACKED;
+
+#define WPA_EAPOL_KEY_MIC_MAX_LEN 24
+#define WPA_KCK_MAX_LEN 24
+#define WPA_KEK_MAX_LEN 32
+#define WPA_TK_MAX_LEN 32
+
+/**
+ * struct wpa_ptk - WPA Pairwise Transient Key
+ * IEEE Std 802.11i-2004 - 8.5.1.2 Pairwise key hierarchy
+ */
+struct wpa_ptk {
+ u8 kck[WPA_KCK_MAX_LEN]; /* EAPOL-Key Key Confirmation Key (KCK) */
+ u8 kek[WPA_KEK_MAX_LEN]; /* EAPOL-Key Key Encryption Key (KEK) */
+ u8 tk[WPA_TK_MAX_LEN]; /* Temporal Key (TK) */
+ size_t kck_len;
+ size_t kek_len;
+ size_t tk_len;
+ int installed; /* 1 if key has already been installed to driver */
+};
+
+struct wpa_gtk {
+ u8 gtk[WPA_GTK_MAX_LEN];
+ size_t gtk_len;
+};
+
+#ifdef CONFIG_IEEE80211W
+struct wpa_igtk {
+ u8 igtk[WPA_IGTK_MAX_LEN];
+ size_t igtk_len;
+};
+#endif /* CONFIG_IEEE80211W */
+
+/* WPA IE version 1
+ * 00-50-f2:1 (OUI:OUI type)
+ * 0x01 0x00 (version; little endian)
+ * (all following fields are optional:)
+ * Group Suite Selector (4 octets) (default: TKIP)
+ * Pairwise Suite Count (2 octets, little endian) (default: 1)
+ * Pairwise Suite List (4 * n octets) (default: TKIP)
+ * Authenticated Key Management Suite Count (2 octets, little endian)
+ * (default: 1)
+ * Authenticated Key Management Suite List (4 * n octets)
+ * (default: unspec 802.1X)
+ * WPA Capabilities (2 octets, little endian) (default: 0)
+ */
+
+struct wpa_ie_hdr {
+ u8 elem_id;
+ u8 len;
+ u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
+ u8 version[2]; /* little endian */
+} STRUCT_PACKED;
+
+
+/* 1/4: PMKID
+ * 2/4: RSN IE
+ * 3/4: one or two RSN IEs + GTK IE (encrypted)
+ * 4/4: empty
+ * 1/2: GTK IE (encrypted)
+ * 2/2: empty
+ */
+
+/* RSN IE version 1
+ * 0x01 0x00 (version; little endian)
+ * (all following fields are optional:)
+ * Group Suite Selector (4 octets) (default: CCMP)
+ * Pairwise Suite Count (2 octets, little endian) (default: 1)
+ * Pairwise Suite List (4 * n octets) (default: CCMP)
+ * Authenticated Key Management Suite Count (2 octets, little endian)
+ * (default: 1)
+ * Authenticated Key Management Suite List (4 * n octets)
+ * (default: unspec 802.1X)
+ * RSN Capabilities (2 octets, little endian) (default: 0)
+ * PMKID Count (2 octets) (default: 0)
+ * PMKID List (16 * n octets)
+ * Management Group Cipher Suite (4 octets) (default: AES-128-CMAC)
+ */
+
+struct rsn_ie_hdr {
+ u8 elem_id; /* WLAN_EID_RSN */
+ u8 len;
+ u8 version[2]; /* little endian */
+} STRUCT_PACKED;
+
+
+#ifdef CONFIG_PEERKEY
+enum {
+ STK_MUI_4WAY_STA_AP = 1,
+ STK_MUI_4WAY_STAT_STA = 2,
+ STK_MUI_GTK = 3,
+ STK_MUI_SMK = 4
+};
+
+enum {
+ STK_ERR_STA_NR = 1,
+ STK_ERR_STA_NRSN = 2,
+ STK_ERR_CPHR_NS = 3,
+ STK_ERR_NO_STSL = 4
+};
+#endif /* CONFIG_PEERKEY */
+
+struct rsn_error_kde {
+ be16 mui;
+ be16 error_type;
+} STRUCT_PACKED;
+
+#ifdef CONFIG_IEEE80211W
+#define WPA_IGTK_KDE_PREFIX_LEN (2 + 6)
+struct wpa_igtk_kde {
+ u8 keyid[2];
+ u8 pn[6];
+ u8 igtk[WPA_IGTK_MAX_LEN];
+} STRUCT_PACKED;
+#endif /* CONFIG_IEEE80211W */
+
+struct rsn_mdie {
+ u8 mobility_domain[MOBILITY_DOMAIN_ID_LEN];
+ u8 ft_capab;
+} STRUCT_PACKED;
+
+#define RSN_FT_CAPAB_FT_OVER_DS BIT(0)
+#define RSN_FT_CAPAB_FT_RESOURCE_REQ_SUPP BIT(1)
+
+struct rsn_ftie {
+ u8 mic_control[2];
+ u8 mic[16];
+ u8 anonce[WPA_NONCE_LEN];
+ u8 snonce[WPA_NONCE_LEN];
+ /* followed by optional parameters */
+} STRUCT_PACKED;
+
+#define FTIE_SUBELEM_R1KH_ID 1
+#define FTIE_SUBELEM_GTK 2
+#define FTIE_SUBELEM_R0KH_ID 3
+#define FTIE_SUBELEM_IGTK 4
+
+struct rsn_rdie {
+ u8 id;
+ u8 descr_count;
+ le16 status_code;
+} STRUCT_PACKED;
+
+
+#ifdef _MSC_VER
+#pragma pack(pop)
+#endif /* _MSC_VER */
+
+
+int wpa_eapol_key_mic(const u8 *key, size_t key_len, int akmp, int ver,
+ const u8 *buf, size_t len, u8 *mic);
+int wpa_pmk_to_ptk(const u8 *pmk, size_t pmk_len, const char *label,
+ const u8 *addr1, const u8 *addr2,
+ const u8 *nonce1, const u8 *nonce2,
+ struct wpa_ptk *ptk, int akmp, int cipher);
+
+#ifdef CONFIG_IEEE80211R
+int wpa_ft_mic(const u8 *kck, size_t kck_len, const u8 *sta_addr,
+ const u8 *ap_addr, u8 transaction_seqnum,
+ const u8 *mdie, size_t mdie_len,
+ const u8 *ftie, size_t ftie_len,
+ const u8 *rsnie, size_t rsnie_len,
+ const u8 *ric, size_t ric_len, u8 *mic);
+void wpa_derive_pmk_r0(const u8 *xxkey, size_t xxkey_len,
+ const u8 *ssid, size_t ssid_len,
+ const u8 *mdid, const u8 *r0kh_id, size_t r0kh_id_len,
+ const u8 *s0kh_id, u8 *pmk_r0, u8 *pmk_r0_name);
+void wpa_derive_pmk_r1_name(const u8 *pmk_r0_name, const u8 *r1kh_id,
+ const u8 *s1kh_id, u8 *pmk_r1_name);
+void wpa_derive_pmk_r1(const u8 *pmk_r0, const u8 *pmk_r0_name,
+ const u8 *r1kh_id, const u8 *s1kh_id,
+ u8 *pmk_r1, u8 *pmk_r1_name);
+int wpa_pmk_r1_to_ptk(const u8 *pmk_r1, const u8 *snonce, const u8 *anonce,
+ const u8 *sta_addr, const u8 *bssid,
+ const u8 *pmk_r1_name,
+ struct wpa_ptk *ptk, u8 *ptk_name, int akmp, int cipher);
+#endif /* CONFIG_IEEE80211R */
+
+struct wpa_ie_data {
+ int proto;
+ int pairwise_cipher;
+ int group_cipher;
+ int key_mgmt;
+ int capabilities;
+ size_t num_pmkid;
+ const u8 *pmkid;
+ int mgmt_group_cipher;
+};
+
+
+int wpa_parse_wpa_ie_rsn(const u8 *rsn_ie, size_t rsn_ie_len,
+ struct wpa_ie_data *data);
+int wpa_parse_wpa_ie_wpa(const u8 *wpa_ie, size_t wpa_ie_len,
+ struct wpa_ie_data *data);
+
+void rsn_pmkid(const u8 *pmk, size_t pmk_len, const u8 *aa, const u8 *spa,
+ u8 *pmkid, int use_sha256);
+#ifdef CONFIG_SUITEB
+int rsn_pmkid_suite_b(const u8 *kck, size_t kck_len, const u8 *aa,
+ const u8 *spa, u8 *pmkid);
+#else /* CONFIG_SUITEB */
+static inline int rsn_pmkid_suite_b(const u8 *kck, size_t kck_len, const u8 *aa,
+ const u8 *spa, u8 *pmkid)
+{
+ return -1;
+}
+#endif /* CONFIG_SUITEB */
+#ifdef CONFIG_SUITEB192
+int rsn_pmkid_suite_b_192(const u8 *kck, size_t kck_len, const u8 *aa,
+ const u8 *spa, u8 *pmkid);
+#else /* CONFIG_SUITEB192 */
+static inline int rsn_pmkid_suite_b_192(const u8 *kck, size_t kck_len,
+ const u8 *aa, const u8 *spa, u8 *pmkid)
+{
+ return -1;
+}
+#endif /* CONFIG_SUITEB192 */
+
+const char * wpa_cipher_txt(int cipher);
+const char * wpa_key_mgmt_txt(int key_mgmt, int proto);
+u32 wpa_akm_to_suite(int akm);
+int wpa_compare_rsn_ie(int ft_initial_assoc,
+ const u8 *ie1, size_t ie1len,
+ const u8 *ie2, size_t ie2len);
+int wpa_insert_pmkid(u8 *ies, size_t *ies_len, const u8 *pmkid);
+
+struct wpa_ft_ies {
+ const u8 *mdie;
+ size_t mdie_len;
+ const u8 *ftie;
+ size_t ftie_len;
+ const u8 *r1kh_id;
+ const u8 *gtk;
+ size_t gtk_len;
+ const u8 *r0kh_id;
+ size_t r0kh_id_len;
+ const u8 *rsn;
+ size_t rsn_len;
+ const u8 *rsn_pmkid;
+ const u8 *tie;
+ size_t tie_len;
+ const u8 *igtk;
+ size_t igtk_len;
+ const u8 *ric;
+ size_t ric_len;
+};
+
+int wpa_ft_parse_ies(const u8 *ies, size_t ies_len, struct wpa_ft_ies *parse);
+
+int wpa_cipher_key_len(int cipher);
+int wpa_cipher_rsc_len(int cipher);
+int wpa_cipher_to_alg(int cipher);
+int wpa_cipher_valid_group(int cipher);
+int wpa_cipher_valid_pairwise(int cipher);
+int wpa_cipher_valid_mgmt_group(int cipher);
+u32 wpa_cipher_to_suite(int proto, int cipher);
+int rsn_cipher_put_suites(u8 *pos, int ciphers);
+int wpa_cipher_put_suites(u8 *pos, int ciphers);
+int wpa_pick_pairwise_cipher(int ciphers, int none_allowed);
+int wpa_pick_group_cipher(int ciphers);
+int wpa_parse_cipher(const char *value);
+int wpa_write_ciphers(char *start, char *end, int ciphers, const char *delim);
+int wpa_select_ap_group_cipher(int wpa, int wpa_pairwise, int rsn_pairwise);
+unsigned int wpa_mic_len(int akmp);
+
+#endif /* WPA_COMMON_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/wpa_ctrl.h b/ap/app/wpa_supplicant-2.6/src/common/wpa_ctrl.h
new file mode 100755
index 0000000..4dcba81
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/wpa_ctrl.h
@@ -0,0 +1,504 @@
+/*
+ * wpa_supplicant/hostapd control interface library
+ * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_CTRL_H
+#define WPA_CTRL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* wpa_supplicant control interface - fixed message prefixes */
+
+/** Interactive request for identity/password/pin */
+#define WPA_CTRL_REQ "CTRL-REQ-"
+
+/** Response to identity/password/pin request */
+#define WPA_CTRL_RSP "CTRL-RSP-"
+
+/* Event messages with fixed prefix */
+/** Authentication completed successfully and data connection enabled */
+#define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
+/** Disconnected, data connection is not available */
+#define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
+/** Association rejected during connection attempt */
+#define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
+/** Authentication rejected during connection attempt */
+#define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
+/** wpa_supplicant is exiting */
+#define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
+/** Password change was completed successfully */
+#define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
+/** EAP-Request/Notification received */
+#define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
+/** EAP authentication started (EAP-Request/Identity received) */
+#define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
+/** EAP method proposed by the server */
+#define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
+/** EAP method selected */
+#define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
+/** EAP peer certificate from TLS */
+#define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
+/** EAP peer certificate alternative subject name component from TLS */
+#define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
+/** EAP TLS certificate chain validation error */
+#define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
+/** EAP status */
+#define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
+/** EAP authentication completed successfully */
+#define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
+/** EAP authentication failed (EAP-Failure received) */
+#define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
+/** Network block temporarily disabled (e.g., due to authentication failure) */
+#define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
+/** Temporarily disabled network block re-enabled */
+#define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
+/** New scan started */
+#define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
+/** New scan results available */
+#define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
+/** Scan command failed */
+#define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
+/** wpa_supplicant state change */
+#define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
+/** A new BSS entry was added (followed by BSS entry id and BSSID) */
+#define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
+/** A BSS entry was removed (followed by BSS entry id and BSSID) */
+#define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
+/** No suitable network was found */
+#define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
+/** Change in the signal level was reported by the driver */
+#define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
+/** Regulatory domain channel */
+#define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
+/** Channel switch (followed by freq=<MHz> and other channel parameters) */
+#define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
+
+/** IP subnet status change notification
+ *
+ * When using an offloaded roaming mechanism where driver/firmware takes care
+ * of roaming and IP subnet validation checks post-roaming, this event can
+ * indicate whether IP subnet has changed.
+ *
+ * The event has a status=<0/1/2> parameter where
+ * 0 = unknown
+ * 1 = IP subnet unchanged (can continue to use the old IP address)
+ * 2 = IP subnet changed (need to get a new IP address)
+ */
+#define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
+
+/** RSN IBSS 4-way handshakes completed with specified peer */
+#define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
+
+/** Notification of frequency conflict due to a concurrent operation.
+ *
+ * The indicated network is disabled and needs to be re-enabled before it can
+ * be used again.
+ */
+#define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
+/** Frequency ranges that the driver recommends to avoid */
+#define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
+/** WPS overlap detected in PBC mode */
+#define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
+/** Available WPS AP with active PBC found in scan results */
+#define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
+/** Available WPS AP with our address as authorized in scan results */
+#define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
+/** Available WPS AP with recently selected PIN registrar found in scan results
+ */
+#define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
+/** Available WPS AP found in scan results */
+#define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
+/** A new credential received */
+#define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
+/** M2D received */
+#define WPS_EVENT_M2D "WPS-M2D "
+/** WPS registration failed after M2/M2D */
+#define WPS_EVENT_FAIL "WPS-FAIL "
+/** WPS registration completed successfully */
+#define WPS_EVENT_SUCCESS "WPS-SUCCESS "
+/** WPS enrollment attempt timed out and was terminated */
+#define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
+/* PBC mode was activated */
+#define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
+/* PBC mode was disabled */
+#define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
+
+#define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
+
+#define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
+
+/* WPS ER events */
+#define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
+#define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
+#define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
+#define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
+#define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
+#define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
+
+/* MESH events */
+#define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
+#define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
+#define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
+#define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
+/** Mesh SAE authentication failure. Wrong password suspected. */
+#define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
+#define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
+
+/* WMM AC events */
+#define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
+#define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
+#define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
+
+/** P2P device found */
+#define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
+
+/** P2P device lost */
+#define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
+
+/** A P2P device requested GO negotiation, but we were not ready to start the
+ * negotiation */
+#define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
+#define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
+#define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
+#define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
+#define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
+#define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
+#define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
+#define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
+#define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
+/* parameters: <peer address> <PIN> */
+#define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
+/* parameters: <peer address> */
+#define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
+/* parameters: <peer address> */
+#define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
+/* parameters: <peer address> */
+#define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
+/* parameters: <peer address> <status> */
+#define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
+/* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
+#define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
+/* parameters: <src addr> <update indicator> <TLVs> */
+#define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
+#define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
+#define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
+#define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
+#define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
+#define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
+#define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
+#define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
+#define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
+#define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
+#define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
+#define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
+#define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
+
+/* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
+#define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
+#define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
+
+#define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
+#define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
+
+#define INTERWORKING_AP "INTERWORKING-AP "
+#define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
+#define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
+#define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
+#define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
+
+/* Credential block added; parameters: <id> */
+#define CRED_ADDED "CRED-ADDED "
+/* Credential block modified; parameters: <id> <field> */
+#define CRED_MODIFIED "CRED-MODIFIED "
+/* Credential block removed; parameters: <id> */
+#define CRED_REMOVED "CRED-REMOVED "
+
+#define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
+/* parameters: <addr> <dialog_token> <freq> */
+#define GAS_QUERY_START "GAS-QUERY-START "
+/* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
+#define GAS_QUERY_DONE "GAS-QUERY-DONE "
+
+/* parameters: <addr> <result> */
+#define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
+
+#define RX_ANQP "RX-ANQP "
+#define RX_HS20_ANQP "RX-HS20-ANQP "
+#define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
+#define RX_HS20_ICON "RX-HS20-ICON "
+
+#define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
+#define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
+
+#define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
+#define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
+
+#define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
+#define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
+
+/* hostapd control interface - fixed message prefixes */
+#define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
+#define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
+#define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
+#define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
+#define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
+#define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
+#define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
+#define AP_STA_CONNECTED "AP-STA-CONNECTED "
+#define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
+#define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
+#define AP_STA_POLL_OK "AP-STA-POLL-OK "
+
+#define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
+#define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
+
+#define AP_EVENT_ENABLED "AP-ENABLED "
+#define AP_EVENT_DISABLED "AP-DISABLED "
+
+#define INTERFACE_ENABLED "INTERFACE-ENABLED "
+#define INTERFACE_DISABLED "INTERFACE-DISABLED "
+
+#define ACS_EVENT_STARTED "ACS-STARTED "
+#define ACS_EVENT_COMPLETED "ACS-COMPLETED "
+#define ACS_EVENT_FAILED "ACS-FAILED "
+
+#define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
+#define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
+#define DFS_EVENT_CAC_START "DFS-CAC-START "
+#define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
+#define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
+
+#define AP_CSA_FINISHED "AP-CSA-FINISHED "
+
+#define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
+#define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
+
+/* BSS Transition Management Response frame received */
+#define BSS_TM_RESP "BSS-TM-RESP "
+
+/* MBO IE with cellular data connection preference received */
+#define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
+
+/* BSS Transition Management Request received with MBO transition reason */
+#define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
+
+/* BSS command information masks */
+
+#define WPA_BSS_MASK_ALL 0xFFFDFFFF
+#define WPA_BSS_MASK_ID BIT(0)
+#define WPA_BSS_MASK_BSSID BIT(1)
+#define WPA_BSS_MASK_FREQ BIT(2)
+#define WPA_BSS_MASK_BEACON_INT BIT(3)
+#define WPA_BSS_MASK_CAPABILITIES BIT(4)
+#define WPA_BSS_MASK_QUAL BIT(5)
+#define WPA_BSS_MASK_NOISE BIT(6)
+#define WPA_BSS_MASK_LEVEL BIT(7)
+#define WPA_BSS_MASK_TSF BIT(8)
+#define WPA_BSS_MASK_AGE BIT(9)
+#define WPA_BSS_MASK_IE BIT(10)
+#define WPA_BSS_MASK_FLAGS BIT(11)
+#define WPA_BSS_MASK_SSID BIT(12)
+#define WPA_BSS_MASK_WPS_SCAN BIT(13)
+#define WPA_BSS_MASK_P2P_SCAN BIT(14)
+#define WPA_BSS_MASK_INTERNETW BIT(15)
+#define WPA_BSS_MASK_WIFI_DISPLAY BIT(16)
+#define WPA_BSS_MASK_DELIM BIT(17)
+#define WPA_BSS_MASK_MESH_SCAN BIT(18)
+#define WPA_BSS_MASK_SNR BIT(19)
+#define WPA_BSS_MASK_EST_THROUGHPUT BIT(20)
+#define WPA_BSS_MASK_FST BIT(21)
+
+
+/* VENDOR_ELEM_* frame id values */
+enum wpa_vendor_elem_frame {
+ VENDOR_ELEM_PROBE_REQ_P2P = 0,
+ VENDOR_ELEM_PROBE_RESP_P2P = 1,
+ VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
+ VENDOR_ELEM_BEACON_P2P_GO = 3,
+ VENDOR_ELEM_P2P_PD_REQ = 4,
+ VENDOR_ELEM_P2P_PD_RESP = 5,
+ VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
+ VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
+ VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
+ VENDOR_ELEM_P2P_INV_REQ = 9,
+ VENDOR_ELEM_P2P_INV_RESP = 10,
+ VENDOR_ELEM_P2P_ASSOC_REQ = 11,
+ VENDOR_ELEM_P2P_ASSOC_RESP = 12,
+ VENDOR_ELEM_ASSOC_REQ = 13,
+ VENDOR_ELEM_PROBE_REQ = 14,
+ NUM_VENDOR_ELEM_FRAMES
+};
+
+
+/* wpa_supplicant/hostapd control interface access */
+
+/**
+ * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
+ * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
+ * Returns: Pointer to abstract control interface data or %NULL on failure
+ *
+ * This function is used to open a control interface to wpa_supplicant/hostapd.
+ * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
+ * is configured in wpa_supplicant/hostapd and other programs using the control
+ * interface need to use matching path configuration.
+ */
+struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
+
+/**
+ * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
+ * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
+ * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
+ * is used.
+ * Returns: Pointer to abstract control interface data or %NULL on failure
+ *
+ * This function is used to open a control interface to wpa_supplicant/hostapd
+ * when the socket path for client need to be specified explicitly. Default
+ * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
+ * socket path is /tmp.
+ */
+struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
+
+
+/**
+ * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ *
+ * This function is used to close a control interface.
+ */
+void wpa_ctrl_close(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * @cmd: Command; usually, ASCII text, e.g., "PING"
+ * @cmd_len: Length of the cmd in bytes
+ * @reply: Buffer for the response
+ * @reply_len: Reply buffer length
+ * @msg_cb: Callback function for unsolicited messages or %NULL if not used
+ * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
+ *
+ * This function is used to send commands to wpa_supplicant/hostapd. Received
+ * response will be written to reply and reply_len is set to the actual length
+ * of the reply. This function will block for up to two seconds while waiting
+ * for the reply. If unsolicited messages are received, the blocking time may
+ * be longer.
+ *
+ * msg_cb can be used to register a callback function that will be called for
+ * unsolicited messages received while waiting for the command response. These
+ * messages may be received if wpa_ctrl_request() is called at the same time as
+ * wpa_supplicant/hostapd is sending such a message. This can happen only if
+ * the program has used wpa_ctrl_attach() to register itself as a monitor for
+ * event messages. Alternatively to msg_cb, programs can register two control
+ * interface connections and use one of them for commands and the other one for
+ * receiving event messages, in other words, call wpa_ctrl_attach() only for
+ * the control interface connection that will be used for event messages.
+ */
+int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
+ char *reply, size_t *reply_len,
+ void (*msg_cb)(char *msg, size_t len));
+
+
+/**
+ * wpa_ctrl_attach - Register as an event monitor for the control interface
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: 0 on success, -1 on failure, -2 on timeout
+ *
+ * This function registers the control interface connection as a monitor for
+ * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
+ * control interface connection starts receiving event messages that can be
+ * read with wpa_ctrl_recv().
+ */
+int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_detach - Unregister event monitor from the control interface
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: 0 on success, -1 on failure, -2 on timeout
+ *
+ * This function unregisters the control interface connection as a monitor for
+ * wpa_supplicant/hostapd events, i.e., cancels the registration done with
+ * wpa_ctrl_attach().
+ */
+int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_recv - Receive a pending control interface message
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * @reply: Buffer for the message data
+ * @reply_len: Length of the reply buffer
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function will receive a pending control interface message. The received
+ * response will be written to reply and reply_len is set to the actual length
+ * of the reply.
+
+ * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
+ * must have been used to register the control interface as an event monitor.
+ */
+int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
+
+
+/**
+ * wpa_ctrl_pending - Check whether there are pending event messages
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: 1 if there are pending messages, 0 if no, or -1 on error
+ *
+ * This function will check whether there are any pending control interface
+ * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
+ * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
+ * register the control interface as an event monitor.
+ */
+int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
+
+
+/**
+ * wpa_ctrl_get_fd - Get file descriptor used by the control interface
+ * @ctrl: Control interface data from wpa_ctrl_open()
+ * Returns: File descriptor used for the connection
+ *
+ * This function can be used to get the file descriptor that is used for the
+ * control interface connection. The returned value can be used, e.g., with
+ * select() while waiting for multiple events.
+ *
+ * The returned file descriptor must not be used directly for sending or
+ * receiving packets; instead, the library functions wpa_ctrl_request() and
+ * wpa_ctrl_recv() must be used for this.
+ */
+int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
+
+#ifdef ANDROID
+/**
+ * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
+ * may be left over from clients that were previously connected to
+ * wpa_supplicant. This keeps these files from being orphaned in the
+ * event of crashes that prevented them from being removed as part
+ * of the normal orderly shutdown.
+ */
+void wpa_ctrl_cleanup(void);
+#endif /* ANDROID */
+
+#ifdef CONFIG_CTRL_IFACE_UDP
+/* Port range for multiple wpa_supplicant instances and multiple VIFs */
+#define WPA_CTRL_IFACE_PORT 9877
+#define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
+#define WPA_GLOBAL_CTRL_IFACE_PORT 9878
+#define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
+
+char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
+#endif /* CONFIG_CTRL_IFACE_UDP */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* WPA_CTRL_H */
diff --git a/ap/app/wpa_supplicant-2.6/src/common/wpa_helpers.h b/ap/app/wpa_supplicant-2.6/src/common/wpa_helpers.h
new file mode 100755
index 0000000..54c2872
--- /dev/null
+++ b/ap/app/wpa_supplicant-2.6/src/common/wpa_helpers.h
@@ -0,0 +1,37 @@
+/*
+ * wpa_supplicant ctrl_iface helpers
+ * Copyright (c) 2010-2011, Atheros Communications, Inc.
+ * Copyright (c) 2011-2012, Qualcomm Atheros, Inc.
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+#ifndef WPA_HELPERS_H
+#define WPA_HELPERS_H
+
+int wpa_command(const char *ifname, const char *cmd);
+int wpa_command_resp(const char *ifname, const char *cmd,
+ char *resp, size_t resp_size);
+int get_wpa_status(const char *ifname, const char *field, char *obuf,
+ size_t obuf_size);
+
+struct wpa_ctrl * open_wpa_mon(const char *ifname);
+int wait_ip_addr(const char *ifname, int timeout);
+int get_wpa_cli_event(struct wpa_ctrl *mon,
+ const char *event, char *buf, size_t buf_size);
+int get_wpa_cli_event2(struct wpa_ctrl *mon,
+ const char *event, const char *event2,
+ char *buf, size_t buf_size);
+
+int add_network(const char *ifname);
+int set_network(const char *ifname, int id, const char *field,
+ const char *value);
+int set_network_quoted(const char *ifname, int id, const char *field,
+ const char *value);
+int add_cred(const char *ifname);
+int set_cred(const char *ifname, int id, const char *field, const char *value);
+int set_cred_quoted(const char *ifname, int id, const char *field,
+ const char *value);
+
+#endif /* WPA_HELPERS_H */