zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/app/zte_log_agent/port_com.c b/ap/app/zte_log_agent/port_com.c
new file mode 100644
index 0000000..dfdd869
--- /dev/null
+++ b/ap/app/zte_log_agent/port_com.c
@@ -0,0 +1,272 @@
+/**
+ * ±¾³ÌÐò·ûºÏGPLÌõÔ¼
+ * Beneboy 2003-5-16
+ */
+#include <stdio.h> // printf
+#include <fcntl.h> // open
+#include <string.h> // bzero
+#include <stdlib.h> // exit
+#include <termios.h> //termios, tcgetattr(), tcsetattr()
+#include <unistd.h>
+#include "port_com.h"
+
+// ½ÓÊÕ³¬Ê±
+#define TIMEOUT_SEC(buflen,baud) (buflen*20/baud+1)
+#define TIMEOUT_USEC 0
+
+// serial port information
+portinfo_t g_sPortInfo =
+{
+ '0', // print prompt after receiving
+ 115200, // baudrate: 115200
+ '8', // databit: 8
+ '0', // debug: off
+ '0', // echo: off
+ '0', // flow control: software
+ '0', // default tty: COM1
+ '0', // parity: none
+ '1', // stopbit: 1
+ 0 // reserved
+};
+
+/**
+ * ²¨ÌØÂÊת»¯×ª»»º¯Êý
+ */
+int convbaud(unsigned long int baudrate)
+{
+ switch (baudrate)
+ {
+ case 2400:
+ return B2400;
+ case 4800:
+ return B4800;
+ case 9600:
+ return B9600;
+ case 19200:
+ return B19200;
+ case 38400:
+ return B38400;
+ case 57600:
+ return B57600;
+ case 115200:
+ return B115200;
+ default:
+ return B9600;
+ }
+}
+
+/**
+ * Setup comm attr
+ * fd: ´®¿ÚÎļþÃèÊö·û, pportinfo: ´ýÉèÖõĶ˿ÚÐÅÏ¢s
+ *
+ */
+int PortSet(int fd)
+{
+ struct termios termios_old, termios_new;
+ int baudrate, tmp;
+ char databit, stopbit, parity, fctl;
+ bzero(&termios_old, sizeof(termios_old));
+ bzero(&termios_new, sizeof(termios_new));
+ cfmakeraw(&termios_new);
+ tcgetattr(fd, &termios_old); //get the serial port attributions
+ /*------------ÉèÖö˿ÚÊôÐÔ----------------*/
+ //baudrates
+ baudrate = convbaud(g_sPortInfo.baudrate);
+ cfsetispeed(&termios_new, baudrate); // ÌîÈë´®¿ÚÊäÈë¶Ë²¨ÌØÂÊ
+ cfsetospeed(&termios_new, baudrate); // ÌîÈë´®¿ÚÊä³ö¶Ë²¨ÌØÂÊ
+ termios_new.c_cflag |= CLOCAL; // ¿ØÖÆģʽ, ±£Ö¤³ÌÐò²»»á³ÉΪ¶Ë¿ÚµÄÕ¼ÓÐÕß
+ termios_new.c_cflag |= CREAD; // ¿ØÖÆģʽ, ʹÄܶ˿ڶÁÈ¡ÊäÈëµÄÊý¾Ý
+ // ¿ØÖÆģʽ, flow control
+ fctl = g_sPortInfo.fctl;
+ switch (fctl)
+ {
+ case '0':
+ {
+ termios_new.c_cflag &= ~CRTSCTS; //no flow control
+ }
+ break;
+ case '1':
+ {
+ termios_new.c_cflag |= CRTSCTS; //hardware flow control
+ }
+ break;
+ case '2':
+ {
+ termios_new.c_iflag |= IXON | IXOFF | IXANY; //software flow control
+ }
+ break;
+ default:
+ {
+ printf("Unknown fctl %c\n", fctl);
+ break;
+ }
+ }
+
+ // ¿ØÖÆģʽ, data bits
+ termios_new.c_cflag &= ~CSIZE; // ¿ØÖÆģʽ, ÆÁ±Î×Ö·û´óСλ
+ databit = g_sPortInfo.databit;
+ switch (databit)
+ {
+ case '5':
+ termios_new.c_cflag |= CS5;
+ //lint -fallthrough
+ case '6':
+ termios_new.c_cflag |= CS6;
+ //lint -fallthrough
+ case '7':
+ termios_new.c_cflag |= CS7;
+ //lint -fallthrough
+ default:
+ termios_new.c_cflag |= CS8;
+ }
+
+ // ¿ØÖÆģʽ parity check
+ parity = g_sPortInfo.parity;
+ switch (parity)
+ {
+ case '0':
+ {
+ termios_new.c_cflag &= ~PARENB; // no parity check
+ }
+ break;
+ case '1':
+ {
+ termios_new.c_cflag |= PARENB; // odd check
+ termios_new.c_cflag &= ~PARODD;
+ }
+ break;
+ case '2':
+ {
+ termios_new.c_cflag |= PARENB; // even check
+ termios_new.c_cflag |= PARODD;
+ }
+ break;
+ default:
+ {
+ printf("Unknown parity %c\n", parity);
+ break;
+ }
+ }
+
+ // ¿ØÖÆģʽ, stop bits
+ stopbit = g_sPortInfo.stopbit;
+ if (stopbit == '2')
+ {
+ termios_new.c_cflag |= CSTOPB; // 2 stop bits
+ }
+ else
+ {
+ termios_new.c_cflag &= ~CSTOPB; // 1 stop bits
+ }
+
+ //other attributions default
+ termios_new.c_oflag &= ~OPOST; // Êä³öģʽ, ÔʼÊý¾ÝÊä³ö
+ termios_new.c_cc[VMIN] = 1; // ¿ØÖÆ×Ö·û, ËùÒª¶ÁÈ¡×Ö·ûµÄ×îСÊýÁ¿
+ termios_new.c_cc[VTIME] = 1; // ¿ØÖÆ×Ö·û, ¶ÁÈ¡µÚÒ»¸ö×Ö·ûµÄµÈ´ýʱ¼ä, unit: (1/10)second
+ tcflush(fd, TCIFLUSH); // Òç³öµÄÊý¾Ý¿ÉÒÔ½ÓÊÕ,µ«²»¶Á
+ tmp = tcsetattr(fd, TCSANOW, &termios_new); // ÉèÖÃÐÂÊôÐÔ, TCSANOW: ËùÓɸıäÁ¢¼´ÉúЧ
+ tcgetattr(fd, &termios_old);
+ return(tmp);
+}
+
+/**
+ * Open serial port
+ * tty: ¶Ë¿ÚºÅ ttyS0, ttyS1, ....
+ * ·µ»ØֵΪ´®¿ÚÎļþÃèÊö·û
+ */
+int PortOpen(pportinfo_t pportinfo, int mode)
+{
+ return 0;
+}
+
+/**
+ * Close serial port
+ */
+void PortClose(int fd)
+{
+ close(fd);
+}
+
+/**
+ * PortSend
+ * fd: ´®¿ÚÃèÊö·û,
+ * data: ´ý·¢ËÍÊý¾ÝÖ¸Õë
+ * datalen: Êý¾Ý³¤¶È
+ * flag: ·¢ËÍ·½Ê½±êʶ
+ * ·µ»Øʵ¼Ê·¢Ëͳ¤¶È
+ */
+int PortSend(int fd, unsigned char* data, int datalen)
+{
+ int len = 0;
+
+ len = write(fd, data, datalen); //ʵ¼ÊдÈëµÄ³¤¶È
+ if (len == datalen)
+ {
+ return (len);
+ }
+ else
+ {
+ tcflush(fd, TCOFLUSH);
+ return -1;
+ }
+}
+
+/**
+ * PortRecv
+ * ²ÎÊý£º
+ * fd: ´®¿ÚÃèÊö·û,
+ * data: ´ý½ÓÊÕÊý¾ÝÖ¸Õë
+ * datalen: Êý¾Ý³¤¶È
+ * flag: ½ÓÊÕ·½Ê½±êʶ
+ * ·µ»Øʵ¼Ê¶ÁÈëµÄ×Ö½ÚÊý
+ */
+int PortRecv(int fd, unsigned char* data, int datalen)
+{
+#if 0
+ int readlen, fs_sel;
+ fd_set fs_read;
+ struct timeval tv_timeout;
+ FD_ZERO(&fs_read);
+ FD_SET(fd, &fs_read);
+
+ /*RAT ¸ÃÖµÓ¦¸Ã¼õСÒÔÌá¸ßÏìÓ¦ËÙ¶È*/
+ tv_timeout.tv_sec = 0;/*TIMEOUT_SEC(datalen, baudrate);*/
+
+ tv_timeout.tv_usec = 200;/*TIMEOUT_USEC;*/
+
+ fs_sel = select(fd + 1, &fs_read, NULL, NULL, &tv_timeout);
+ if (fs_sel)
+ {
+
+ printf("rpmsg: portrecv fd =%d\n",fd);
+ readlen = read(fd, data, datalen);
+ return(readlen);
+ }
+ else
+ {
+ return(0);
+ }
+#else
+ int readlen = read(fd, data, datalen);
+ return(readlen);
+#endif
+}
+
+int tty_set_log_port(int fd)
+{
+ if (fd < 0)
+ {
+ printf("tty_set_port failed. %d\n", fd);
+ return 0;
+ }
+ printf("tty_set_port ok.\n");
+ //ioctl(g_AtProxy_RpProxyFd, (('R'<<8)|6|(0x4004<<16)), 0x400);
+ //printf("rpmsg: ap port open fd = %d\n",fd);//add shideyou
+ //ioctl(fd, (('R'<<8)|1|(0x4004<<16)), 0x400);
+ //ioctl(fd, (('R'<<8)|4|(0x4004<<16)), 0);
+ PortSet(fd);
+ //ZTE_LOG(LOG_DEBUG, "port is open!");
+ return 1;
+}
+
+