zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/build/uClibc/libc/stdlib/malloc-standard/free.c b/ap/build/uClibc/libc/stdlib/malloc-standard/free.c
new file mode 100644
index 0000000..39e54d6
--- /dev/null
+++ b/ap/build/uClibc/libc/stdlib/malloc-standard/free.c
@@ -0,0 +1,410 @@
+/*
+ This is a version (aka dlmalloc) of malloc/free/realloc written by
+ Doug Lea and released to the public domain. Use, modify, and
+ redistribute this code without permission or acknowledgement in any
+ way you wish. Send questions, comments, complaints, performance
+ data, etc to dl@cs.oswego.edu
+
+ VERSION 2.7.2 Sat Aug 17 09:07:30 2002 Doug Lea (dl at gee)
+
+ Note: There may be an updated version of this malloc obtainable at
+ ftp://gee.cs.oswego.edu/pub/misc/malloc.c
+ Check before installing!
+
+ Hacked up for uClibc by Erik Andersen <andersen@codepoet.org>
+*/
+
+#include "malloc.h"
+
+
+/* ------------------------- __malloc_trim -------------------------
+ __malloc_trim is an inverse of sorts to __malloc_alloc. It gives memory
+ back to the system (via negative arguments to sbrk) if there is unused
+ memory at the `high' end of the malloc pool. It is called automatically by
+ free() when top space exceeds the trim threshold. It is also called by the
+ public malloc_trim routine. It returns 1 if it actually released any
+ memory, else 0.
+*/
+static int __malloc_trim(size_t pad, mstate av)
+{
+ long top_size; /* Amount of top-most memory */
+ long extra; /* Amount to release */
+ long released; /* Amount actually released */
+ char* current_brk; /* address returned by pre-check sbrk call */
+ char* new_brk; /* address returned by post-check sbrk call */
+ size_t pagesz;
+
+ pagesz = av->pagesize;
+ top_size = chunksize(av->top);
+
+ /* Release in pagesize units, keeping at least one page */
+ extra = ((top_size - pad - MINSIZE + (pagesz-1)) / pagesz - 1) * pagesz;
+
+ if (extra > 0) {
+
+ /*
+ Only proceed if end of memory is where we last set it.
+ This avoids problems if there were foreign sbrk calls.
+ */
+ current_brk = (char*)(MORECORE(0));
+ if (current_brk == (char*)(av->top) + top_size) {
+
+ /*
+ Attempt to release memory. We ignore MORECORE return value,
+ and instead call again to find out where new end of memory is.
+ This avoids problems if first call releases less than we asked,
+ of if failure somehow altered brk value. (We could still
+ encounter problems if it altered brk in some very bad way,
+ but the only thing we can do is adjust anyway, which will cause
+ some downstream failure.)
+ */
+
+ MORECORE(-extra);
+ new_brk = (char*)(MORECORE(0));
+
+ if (new_brk != (char*)MORECORE_FAILURE) {
+ released = (long)(current_brk - new_brk);
+
+ if (released != 0) {
+ /* Success. Adjust top. */
+ av->sbrked_mem -= released;
+ set_head(av->top, (top_size - released) | PREV_INUSE);
+ check_malloc_state();
+ return 1;
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+/* ------------------------- malloc_trim -------------------------
+ malloc_trim(size_t pad);
+
+ If possible, gives memory back to the system (via negative
+ arguments to sbrk) if there is unused memory at the `high' end of
+ the malloc pool. You can call this after freeing large blocks of
+ memory to potentially reduce the system-level memory requirements
+ of a program. However, it cannot guarantee to reduce memory. Under
+ some allocation patterns, some large free blocks of memory will be
+ locked between two used chunks, so they cannot be given back to
+ the system.
+
+ The `pad' argument to malloc_trim represents the amount of free
+ trailing space to leave untrimmed. If this argument is zero,
+ only the minimum amount of memory to maintain internal data
+ structures will be left (one page or less). Non-zero arguments
+ can be supplied to maintain enough trailing space to service
+ future expected allocations without having to re-obtain memory
+ from the system.
+
+ Malloc_trim returns 1 if it actually released any memory, else 0.
+ On systems that do not support "negative sbrks", it will always
+ return 0.
+*/
+int malloc_trim(size_t pad)
+{
+ mstate av = get_malloc_state();
+ __malloc_consolidate(av);
+ return __malloc_trim(pad, av);
+}
+
+/*
+ Initialize a malloc_state struct.
+
+ This is called only from within __malloc_consolidate, which needs
+ be called in the same contexts anyway. It is never called directly
+ outside of __malloc_consolidate because some optimizing compilers try
+ to inline it at all call points, which turns out not to be an
+ optimization at all. (Inlining it in __malloc_consolidate is fine though.)
+*/
+static void malloc_init_state(mstate av)
+{
+ int i;
+ mbinptr bin;
+
+ /* Establish circular links for normal bins */
+ for (i = 1; i < NBINS; ++i) {
+ bin = bin_at(av,i);
+ bin->fd = bin->bk = bin;
+ }
+
+ av->top_pad = DEFAULT_TOP_PAD;
+ av->n_mmaps_max = DEFAULT_MMAP_MAX;
+ av->mmap_threshold = DEFAULT_MMAP_THRESHOLD;
+ av->trim_threshold = DEFAULT_TRIM_THRESHOLD;
+
+#if MORECORE_CONTIGUOUS
+ set_contiguous(av);
+#else
+ set_noncontiguous(av);
+#endif
+
+
+ set_max_fast(av, DEFAULT_MXFAST);
+
+ av->top = initial_top(av);
+ av->pagesize = malloc_getpagesize;
+}
+
+
+/* ----------------------------------------------------------------------
+ *
+ * PUBLIC STUFF
+ *
+ * ----------------------------------------------------------------------*/
+
+
+/* ------------------------- __malloc_consolidate -------------------------
+
+ __malloc_consolidate is a specialized version of free() that tears
+ down chunks held in fastbins. Free itself cannot be used for this
+ purpose since, among other things, it might place chunks back onto
+ fastbins. So, instead, we need to use a minor variant of the same
+ code.
+
+ Also, because this routine needs to be called the first time through
+ malloc anyway, it turns out to be the perfect place to trigger
+ initialization code.
+*/
+void attribute_hidden __malloc_consolidate(mstate av)
+{
+ mfastbinptr* fb; /* current fastbin being consolidated */
+ mfastbinptr* maxfb; /* last fastbin (for loop control) */
+ mchunkptr p; /* current chunk being consolidated */
+ mchunkptr nextp; /* next chunk to consolidate */
+ mchunkptr unsorted_bin; /* bin header */
+ mchunkptr first_unsorted; /* chunk to link to */
+
+ /* These have same use as in free() */
+ mchunkptr nextchunk;
+ size_t size;
+ size_t nextsize;
+ size_t prevsize;
+ int nextinuse;
+ mchunkptr bck;
+ mchunkptr fwd;
+
+ /*
+ If max_fast is 0, we know that av hasn't
+ yet been initialized, in which case do so below
+ */
+
+ if (av->max_fast != 0) {
+ clear_fastchunks(av);
+
+ unsorted_bin = unsorted_chunks(av);
+
+ /*
+ Remove each chunk from fast bin and consolidate it, placing it
+ then in unsorted bin. Among other reasons for doing this,
+ placing in unsorted bin avoids needing to calculate actual bins
+ until malloc is sure that chunks aren't immediately going to be
+ reused anyway.
+ */
+
+ maxfb = &(av->fastbins[fastbin_index(av->max_fast)]);
+ fb = &(av->fastbins[0]);
+ do {
+ if ( (p = *fb) != 0) {
+ *fb = 0;
+
+ do {
+ check_inuse_chunk(p);
+ nextp = p->fd;
+
+ /* Slightly streamlined version of consolidation code in free() */
+ size = p->size & ~PREV_INUSE;
+ nextchunk = chunk_at_offset(p, size);
+ nextsize = chunksize(nextchunk);
+
+ if (!prev_inuse(p)) {
+ prevsize = p->prev_size;
+ size += prevsize;
+ p = chunk_at_offset(p, -((long) prevsize));
+ unlink(p, bck, fwd);
+ }
+
+ if (nextchunk != av->top) {
+ nextinuse = inuse_bit_at_offset(nextchunk, nextsize);
+ set_head(nextchunk, nextsize);
+
+ if (!nextinuse) {
+ size += nextsize;
+ unlink(nextchunk, bck, fwd);
+ }
+
+ first_unsorted = unsorted_bin->fd;
+ unsorted_bin->fd = p;
+ first_unsorted->bk = p;
+
+ set_head(p, size | PREV_INUSE);
+ p->bk = unsorted_bin;
+ p->fd = first_unsorted;
+ set_foot(p, size);
+ }
+
+ else {
+ size += nextsize;
+ set_head(p, size | PREV_INUSE);
+ av->top = p;
+ }
+
+ } while ( (p = nextp) != 0);
+
+ }
+ } while (fb++ != maxfb);
+ }
+ else {
+ malloc_init_state(av);
+ check_malloc_state();
+ }
+}
+
+
+/* ------------------------------ free ------------------------------ */
+void free(void* mem)
+{
+ mstate av;
+
+ mchunkptr p; /* chunk corresponding to mem */
+ size_t size; /* its size */
+ mfastbinptr* fb; /* associated fastbin */
+ mchunkptr nextchunk; /* next contiguous chunk */
+ size_t nextsize; /* its size */
+ int nextinuse; /* true if nextchunk is used */
+ size_t prevsize; /* size of previous contiguous chunk */
+ mchunkptr bck; /* misc temp for linking */
+ mchunkptr fwd; /* misc temp for linking */
+
+ /* free(0) has no effect */
+ if (mem == NULL)
+ return;
+
+ __MALLOC_LOCK;
+ av = get_malloc_state();
+ p = mem2chunk(mem);
+ size = chunksize(p);
+
+ check_inuse_chunk(p);
+
+ /*
+ If eligible, place chunk on a fastbin so it can be found
+ and used quickly in malloc.
+ */
+
+ if ((unsigned long)(size) <= (unsigned long)(av->max_fast)
+
+#if TRIM_FASTBINS
+ /* If TRIM_FASTBINS set, don't place chunks
+ bordering top into fastbins */
+ && (chunk_at_offset(p, size) != av->top)
+#endif
+ ) {
+
+ set_fastchunks(av);
+ fb = &(av->fastbins[fastbin_index(size)]);
+ p->fd = *fb;
+ *fb = p;
+ }
+
+ /*
+ Consolidate other non-mmapped chunks as they arrive.
+ */
+
+ else if (!chunk_is_mmapped(p)) {
+ set_anychunks(av);
+
+ nextchunk = chunk_at_offset(p, size);
+ nextsize = chunksize(nextchunk);
+
+ /* consolidate backward */
+ if (!prev_inuse(p)) {
+ prevsize = p->prev_size;
+ size += prevsize;
+ p = chunk_at_offset(p, -((long) prevsize));
+ unlink(p, bck, fwd);
+ }
+
+ if (nextchunk != av->top) {
+ /* get and clear inuse bit */
+ nextinuse = inuse_bit_at_offset(nextchunk, nextsize);
+ set_head(nextchunk, nextsize);
+
+ /* consolidate forward */
+ if (!nextinuse) {
+ unlink(nextchunk, bck, fwd);
+ size += nextsize;
+ }
+
+ /*
+ Place the chunk in unsorted chunk list. Chunks are
+ not placed into regular bins until after they have
+ been given one chance to be used in malloc.
+ */
+
+ bck = unsorted_chunks(av);
+ fwd = bck->fd;
+ p->bk = bck;
+ p->fd = fwd;
+ bck->fd = p;
+ fwd->bk = p;
+
+ set_head(p, size | PREV_INUSE);
+ set_foot(p, size);
+
+ check_free_chunk(p);
+ }
+
+ /*
+ If the chunk borders the current high end of memory,
+ consolidate into top
+ */
+
+ else {
+ size += nextsize;
+ set_head(p, size | PREV_INUSE);
+ av->top = p;
+ check_chunk(p);
+ }
+
+ /*
+ If freeing a large space, consolidate possibly-surrounding
+ chunks. Then, if the total unused topmost memory exceeds trim
+ threshold, ask malloc_trim to reduce top.
+
+ Unless max_fast is 0, we don't know if there are fastbins
+ bordering top, so we cannot tell for sure whether threshold
+ has been reached unless fastbins are consolidated. But we
+ don't want to consolidate on each free. As a compromise,
+ consolidation is performed if FASTBIN_CONSOLIDATION_THRESHOLD
+ is reached.
+ */
+
+ if ((unsigned long)(size) >= FASTBIN_CONSOLIDATION_THRESHOLD) {
+ if (have_fastchunks(av))
+ __malloc_consolidate(av);
+
+ if ((unsigned long)(chunksize(av->top)) >=
+ (unsigned long)(av->trim_threshold))
+ __malloc_trim(av->top_pad, av);
+ }
+
+ }
+ /*
+ If the chunk was allocated via mmap, release via munmap()
+ Note that if HAVE_MMAP is false but chunk_is_mmapped is
+ true, then user must have overwritten memory. There's nothing
+ we can do to catch this error unless DEBUG is set, in which case
+ check_inuse_chunk (above) will have triggered error.
+ */
+
+ else {
+ size_t offset = p->prev_size;
+ av->n_mmaps--;
+ av->mmapped_mem -= (size + offset);
+ munmap((char*)p - offset, size + offset);
+ }
+ __MALLOC_UNLOCK;
+}
+