zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/build/uClibc/libpthread/nptl/sysdeps/generic/Makefile b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/Makefile
new file mode 100644
index 0000000..582661f
--- /dev/null
+++ b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/Makefile
@@ -0,0 +1,13 @@
+# Makefile for uClibc NPTL
+#
+# Copyright (C) 2006 Steven J. Hill <sjhill@uclibc.org>
+#
+# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
+#
+
+top_srcdir=../../../../
+top_builddir=../../../../
+all: objs
+include $(top_builddir)Rules.mak
+include Makefile.in
+include $(top_srcdir)Makerules
diff --git a/ap/build/uClibc/libpthread/nptl/sysdeps/generic/Makefile.in b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/Makefile.in
new file mode 100644
index 0000000..eb656ee
--- /dev/null
+++ b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/Makefile.in
@@ -0,0 +1,25 @@
+# Makefile for uClibc NPTL
+#
+# Copyright (C) 2006 Steven J. Hill <sjhill@uclibc.org>
+#
+# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
+#
+subdirs += libpthread/nptl/sysdeps/generic
+#
+# NOTE: Alpha and MIPS have their own versions of 'libc-tls.c' in
+# their architecture specific directory which will override
+# the one here.
+#
+libpthread_generic_DIR := $(top_srcdir)libpthread/nptl/sysdeps/generic
+libpthread_generic_OUT := $(top_builddir)libpthread/nptl/sysdeps/generic
+
+libpthread_generic_libc_a_CSRC = libc-tls.c
+libpthread_generic_libc_a_COBJ = $(patsubst %.c,$(libpthread_generic_OUT)/%.o,$(libpthread_generic_libc_a_CSRC))
+libpthread_generic_libc_a_OBJS = $(libpthread_generic_libc_a_COBJ)
+libpthread_ld_tls_CSRC = dl-tls.c
+libpthread_ld_tls_COBJ = $(patsubst %.c,$(libpthread_generic_OUT)/%.o,$(libpthread_ld_tls_CSRC))
+
+objclean-y += CLEAN_libpthread/nptl/sysdeps/generic
+
+CLEAN_libpthread/nptl/sysdeps/generic:
+ $(do_rm) $(addprefix $(libpthread_generic_OUT)/*., o os oS)
diff --git a/ap/build/uClibc/libpthread/nptl/sysdeps/generic/dl-tls.c b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/dl-tls.c
new file mode 100644
index 0000000..904da8b
--- /dev/null
+++ b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/dl-tls.c
@@ -0,0 +1,901 @@
+/* Thread-local storage handling in the ELF dynamic linker. Generic version.
+ Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+
+#if defined SHARED || defined NOT_IN_libc
+# error in buildsystem: This file is for libc.a
+#endif
+#include <libintl.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <sys/param.h>
+#include <tls.h>
+#include <dl-tls.h>
+#include <ldsodefs.h>
+#include <dl-elf.h>
+#include <dl-hash.h>
+
+#include <assert.h>
+#include <link.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdio.h>
+
+#define _dl_malloc malloc
+#define _dl_memset memset
+#define _dl_mempcpy mempcpy
+#define _dl_dprintf fprintf
+#define _dl_debug_file stderr
+#define _dl_exit exit
+
+/* Amount of excess space to allocate in the static TLS area
+ to allow dynamic loading of modules defining IE-model TLS data. */
+# define TLS_STATIC_SURPLUS 64 + DL_NNS * 100
+
+/* Value used for dtv entries for which the allocation is delayed. */
+# define TLS_DTV_UNALLOCATED ((void *) -1l)
+
+
+/* Out-of-memory handler. */
+# ifdef SHARED
+static void
+__attribute__ ((__noreturn__))
+oom (void)
+{
+ do {
+ _dl_dprintf (_dl_debug_file,
+ "cannot allocate thread-local memory: ABORT\n");
+ _dl_exit (127);
+ } while (1);
+}
+# endif
+
+
+void *_dl_memalign(size_t alignment, size_t bytes);
+void *_dl_memalign(size_t alignment, size_t bytes)
+{
+ return _dl_malloc(bytes);
+}
+
+
+/*
+ * We are trying to perform a static TLS relocation in MAP, but it was
+ * dynamically loaded. This can only work if there is enough surplus in
+ * the static TLS area already allocated for each running thread. If this
+ * object's TLS segment is too big to fit, we fail. If it fits,
+ * we set MAP->l_tls_offset and return.
+ * This function intentionally does not return any value but signals error
+ * directly, as static TLS should be rare and code handling it should
+ * not be inlined as much as possible.
+ */
+
+
+void
+internal_function __attribute_noinline__
+_dl_allocate_static_tls (struct link_map *map)
+{
+ /* If the alignment requirements are too high fail. */
+ if (map->l_tls_align > _dl_tls_static_align)
+ {
+fail:
+ _dl_dprintf(_dl_debug_file, "cannot allocate memory in static TLS block");
+ _dl_exit(30);
+ }
+
+# if defined(TLS_TCB_AT_TP)
+ size_t freebytes;
+ size_t n;
+ size_t blsize;
+
+ freebytes = _dl_tls_static_size - _dl_tls_static_used - TLS_TCB_SIZE;
+
+ blsize = map->l_tls_blocksize + map->l_tls_firstbyte_offset;
+ if (freebytes < blsize)
+ goto fail;
+
+ n = (freebytes - blsize) / map->l_tls_align;
+
+ size_t offset = _dl_tls_static_used + (freebytes - n * map->l_tls_align
+ - map->l_tls_firstbyte_offset);
+
+ map->l_tls_offset = _dl_tls_static_used = offset;
+# elif defined(TLS_DTV_AT_TP)
+ size_t used;
+ size_t check;
+
+ size_t offset = roundup (_dl_tls_static_used, map->l_tls_align);
+ used = offset + map->l_tls_blocksize;
+ check = used;
+
+ /* dl_tls_static_used includes the TCB at the beginning. */
+ if (check > _dl_tls_static_size)
+ goto fail;
+
+ map->l_tls_offset = offset;
+ _dl_tls_static_used = used;
+# else
+# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined"
+# endif
+
+ /*
+ * If the object is not yet relocated we cannot initialize the
+ * static TLS region. Delay it.
+ */
+ if (((struct elf_resolve *) map)->init_flag & RELOCS_DONE)
+ {
+#ifdef SHARED
+ /*
+ * Update the slot information data for at least the generation of
+ * the DSO we are allocating data for.
+ */
+ if (__builtin_expect (THREAD_DTV()[0].counter != _dl_tls_generation, 0))
+ (void) _dl_update_slotinfo (map->l_tls_modid);
+#endif
+ _dl_init_static_tls (map);
+ }
+ else
+ map->l_need_tls_init = 1;
+}
+
+size_t
+internal_function
+_dl_next_tls_modid (void)
+{
+ size_t result;
+
+ if (__builtin_expect (GL(dl_tls_dtv_gaps), false))
+ {
+ size_t disp = 0;
+ struct dtv_slotinfo_list *runp = GL(dl_tls_dtv_slotinfo_list);
+
+ /* Note that this branch will never be executed during program
+ start since there are no gaps at that time. Therefore it
+ does not matter that the dl_tls_dtv_slotinfo is not allocated
+ yet when the function is called for the first times.
+
+ NB: the offset +1 is due to the fact that DTV[0] is used
+ for something else. */
+ result = GL(dl_tls_static_nelem) + 1;
+ if (result <= GL(dl_tls_max_dtv_idx))
+ do
+ {
+ while (result - disp < runp->len)
+ {
+ if (runp->slotinfo[result - disp].map == NULL)
+ break;
+
+ ++result;
+ assert (result <= GL(dl_tls_max_dtv_idx) + 1);
+ }
+
+ if (result - disp < runp->len)
+ break;
+
+ disp += runp->len;
+ }
+ while ((runp = runp->next) != NULL);
+
+ if (result > GL(dl_tls_max_dtv_idx))
+ {
+ /* The new index must indeed be exactly one higher than the
+ previous high. */
+ assert (result == GL(dl_tls_max_dtv_idx) + 1);
+ /* There is no gap anymore. */
+ GL(dl_tls_dtv_gaps) = false;
+
+ goto nogaps;
+ }
+ }
+ else
+ {
+ /* No gaps, allocate a new entry. */
+ nogaps:
+
+ result = ++GL(dl_tls_max_dtv_idx);
+ }
+
+ return result;
+}
+
+
+# ifdef SHARED
+void
+internal_function
+_dl_determine_tlsoffset (void)
+{
+ size_t max_align = TLS_TCB_ALIGN;
+ size_t freetop = 0;
+ size_t freebottom = 0;
+
+ /* The first element of the dtv slot info list is allocated. */
+ assert (GL(dl_tls_dtv_slotinfo_list) != NULL);
+ /* There is at this point only one element in the
+ dl_tls_dtv_slotinfo_list list. */
+ assert (GL(dl_tls_dtv_slotinfo_list)->next == NULL);
+
+ struct dtv_slotinfo *slotinfo = GL(dl_tls_dtv_slotinfo_list)->slotinfo;
+
+ /* Determining the offset of the various parts of the static TLS
+ block has several dependencies. In addition we have to work
+ around bugs in some toolchains.
+
+ Each TLS block from the objects available at link time has a size
+ and an alignment requirement. The GNU ld computes the alignment
+ requirements for the data at the positions *in the file*, though.
+ I.e, it is not simply possible to allocate a block with the size
+ of the TLS program header entry. The data is layed out assuming
+ that the first byte of the TLS block fulfills
+
+ p_vaddr mod p_align == &TLS_BLOCK mod p_align
+
+ This means we have to add artificial padding at the beginning of
+ the TLS block. These bytes are never used for the TLS data in
+ this module but the first byte allocated must be aligned
+ according to mod p_align == 0 so that the first byte of the TLS
+ block is aligned according to p_vaddr mod p_align. This is ugly
+ and the linker can help by computing the offsets in the TLS block
+ assuming the first byte of the TLS block is aligned according to
+ p_align.
+
+ The extra space which might be allocated before the first byte of
+ the TLS block need not go unused. The code below tries to use
+ that memory for the next TLS block. This can work if the total
+ memory requirement for the next TLS block is smaller than the
+ gap. */
+
+# if defined(TLS_TCB_AT_TP)
+ /* We simply start with zero. */
+ size_t offset = 0;
+
+ size_t cnt;
+ for (cnt = 0; slotinfo[cnt].map != NULL; ++cnt)
+ {
+ assert (cnt < GL(dl_tls_dtv_slotinfo_list)->len);
+
+ size_t firstbyte = (-slotinfo[cnt].map->l_tls_firstbyte_offset
+ & (slotinfo[cnt].map->l_tls_align - 1));
+ size_t off;
+ max_align = MAX (max_align, slotinfo[cnt].map->l_tls_align);
+
+ if (freebottom - freetop >= slotinfo[cnt].map->l_tls_blocksize)
+ {
+ off = roundup (freetop + slotinfo[cnt].map->l_tls_blocksize
+ - firstbyte, slotinfo[cnt].map->l_tls_align)
+ + firstbyte;
+ if (off <= freebottom)
+ {
+ freetop = off;
+
+ /* XXX For some architectures we perhaps should store the
+ negative offset. */
+ slotinfo[cnt].map->l_tls_offset = off;
+ continue;
+ }
+ }
+
+ off = roundup (offset + slotinfo[cnt].map->l_tls_blocksize - firstbyte,
+ slotinfo[cnt].map->l_tls_align) + firstbyte;
+ if (off > offset + slotinfo[cnt].map->l_tls_blocksize
+ + (freebottom - freetop))
+ {
+ freetop = offset;
+ freebottom = off - slotinfo[cnt].map->l_tls_blocksize;
+ }
+ offset = off;
+
+ /* XXX For some architectures we perhaps should store the
+ negative offset. */
+ slotinfo[cnt].map->l_tls_offset = off;
+ }
+
+ GL(dl_tls_static_used) = offset;
+ GL(dl_tls_static_size) = (roundup (offset + TLS_STATIC_SURPLUS, max_align)
+ + TLS_TCB_SIZE);
+# elif defined(TLS_DTV_AT_TP)
+ /* The TLS blocks start right after the TCB. */
+ size_t offset = TLS_TCB_SIZE;
+ size_t cnt;
+
+ for (cnt = 0; slotinfo[cnt].map != NULL; ++cnt)
+ {
+ assert (cnt < GL(dl_tls_dtv_slotinfo_list)->len);
+
+ size_t firstbyte = (-slotinfo[cnt].map->l_tls_firstbyte_offset
+ & (slotinfo[cnt].map->l_tls_align - 1));
+ size_t off;
+ max_align = MAX (max_align, slotinfo[cnt].map->l_tls_align);
+
+ if (slotinfo[cnt].map->l_tls_blocksize <= freetop - freebottom)
+ {
+ off = roundup (freebottom, slotinfo[cnt].map->l_tls_align);
+ if (off - freebottom < firstbyte)
+ off += slotinfo[cnt].map->l_tls_align;
+ if (off + slotinfo[cnt].map->l_tls_blocksize - firstbyte <= freetop)
+ {
+ slotinfo[cnt].map->l_tls_offset = off - firstbyte;
+ freebottom = (off + slotinfo[cnt].map->l_tls_blocksize
+ - firstbyte);
+ continue;
+ }
+ }
+
+ off = roundup (offset, slotinfo[cnt].map->l_tls_align);
+ if (off - offset < firstbyte)
+ off += slotinfo[cnt].map->l_tls_align;
+
+ slotinfo[cnt].map->l_tls_offset = off - firstbyte;
+ if (off - firstbyte - offset > freetop - freebottom)
+ {
+ freebottom = offset;
+ freetop = off - firstbyte;
+ }
+
+ offset = off + slotinfo[cnt].map->l_tls_blocksize - firstbyte;
+ }
+
+ GL(dl_tls_static_used) = offset;
+ GL(dl_tls_static_size) = roundup (offset + TLS_STATIC_SURPLUS,
+ TLS_TCB_ALIGN);
+# else
+# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined"
+# endif
+
+ /* The alignment requirement for the static TLS block. */
+ GL(dl_tls_static_align) = max_align;
+}
+
+
+/* This is called only when the data structure setup was skipped at startup,
+ when there was no need for it then. Now we have dynamically loaded
+ something needing TLS, or libpthread needs it. */
+int
+internal_function
+_dl_tls_setup (void)
+{
+ assert (GL(dl_tls_dtv_slotinfo_list) == NULL);
+ assert (GL(dl_tls_max_dtv_idx) == 0);
+
+ const size_t nelem = 2 + TLS_SLOTINFO_SURPLUS;
+
+ GL(dl_tls_dtv_slotinfo_list)
+ = calloc (1, (sizeof (struct dtv_slotinfo_list)
+ + nelem * sizeof (struct dtv_slotinfo)));
+ if (GL(dl_tls_dtv_slotinfo_list) == NULL)
+ return -1;
+
+ GL(dl_tls_dtv_slotinfo_list)->len = nelem;
+
+ /* Number of elements in the static TLS block. It can't be zero
+ because of various assumptions. The one element is null. */
+ GL(dl_tls_static_nelem) = GL(dl_tls_max_dtv_idx) = 1;
+
+ /* This initializes more variables for us. */
+ _dl_determine_tlsoffset ();
+
+ return 0;
+}
+# endif
+
+static void *
+internal_function
+allocate_dtv (void *result)
+{
+ dtv_t *dtv;
+ size_t dtv_length;
+
+ /* We allocate a few more elements in the dtv than are needed for the
+ initial set of modules. This should avoid in most cases expansions
+ of the dtv. */
+ dtv_length = GL(dl_tls_max_dtv_idx) + DTV_SURPLUS;
+ dtv = calloc (dtv_length + 2, sizeof (dtv_t));
+ if (dtv != NULL)
+ {
+ /* This is the initial length of the dtv. */
+ dtv[0].counter = dtv_length;
+
+ /* The rest of the dtv (including the generation counter) is
+ Initialize with zero to indicate nothing there. */
+
+ /* Add the dtv to the thread data structures. */
+ INSTALL_DTV (result, dtv);
+ }
+ else
+ result = NULL;
+
+ return result;
+}
+
+
+/* Get size and alignment requirements of the static TLS block. */
+void
+internal_function
+_dl_get_tls_static_info (size_t *sizep, size_t *alignp)
+{
+ *sizep = GL(dl_tls_static_size);
+ *alignp = GL(dl_tls_static_align);
+}
+
+
+void *
+internal_function
+_dl_allocate_tls_storage (void)
+{
+ void *result;
+ size_t size = GL(dl_tls_static_size);
+
+# if defined(TLS_DTV_AT_TP)
+ /* Memory layout is:
+ [ TLS_PRE_TCB_SIZE ] [ TLS_TCB_SIZE ] [ TLS blocks ]
+ ^ This should be returned. */
+ size += (TLS_PRE_TCB_SIZE + GL(dl_tls_static_align) - 1)
+ & ~(GL(dl_tls_static_align) - 1);
+# endif
+
+ /* Allocate a correctly aligned chunk of memory. */
+ result = _dl_memalign (GL(dl_tls_static_align), size);
+ if (__builtin_expect (result != NULL, 1))
+ {
+ /* Allocate the DTV. */
+ void *allocated = result;
+
+# if defined(TLS_TCB_AT_TP)
+ /* The TCB follows the TLS blocks. */
+ result = (char *) result + size - TLS_TCB_SIZE;
+
+ /* Clear the TCB data structure. We can't ask the caller (i.e.
+ libpthread) to do it, because we will initialize the DTV et al. */
+ _dl_memset (result, '\0', TLS_TCB_SIZE);
+# elif defined(TLS_DTV_AT_TP)
+ result = (char *) result + size - GL(dl_tls_static_size);
+
+ /* Clear the TCB data structure and TLS_PRE_TCB_SIZE bytes before it.
+ We can't ask the caller (i.e. libpthread) to do it, because we will
+ initialize the DTV et al. */
+ _dl_memset ((char *) result - TLS_PRE_TCB_SIZE, '\0',
+ TLS_PRE_TCB_SIZE + TLS_TCB_SIZE);
+# endif
+
+ result = allocate_dtv (result);
+ if (result == NULL)
+ free (allocated);
+ }
+
+ return result;
+}
+
+
+void *
+internal_function
+_dl_allocate_tls_init (void *result)
+{
+ if (result == NULL)
+ /* The memory allocation failed. */
+ return NULL;
+
+ dtv_t *dtv = GET_DTV (result);
+ struct dtv_slotinfo_list *listp;
+ size_t total = 0;
+ size_t maxgen = 0;
+
+ /* We have to prepare the dtv for all currently loaded modules using
+ TLS. For those which are dynamically loaded we add the values
+ indicating deferred allocation. */
+ listp = GL(dl_tls_dtv_slotinfo_list);
+ while (1)
+ {
+ size_t cnt;
+
+ for (cnt = total == 0 ? 1 : 0; cnt < listp->len; ++cnt)
+ {
+ struct link_map *map;
+ void *dest;
+
+ /* Check for the total number of used slots. */
+ if (total + cnt > GL(dl_tls_max_dtv_idx))
+ break;
+
+ map = listp->slotinfo[cnt].map;
+ if (map == NULL)
+ /* Unused entry. */
+ continue;
+
+ /* Keep track of the maximum generation number. This might
+ not be the generation counter. */
+ maxgen = MAX (maxgen, listp->slotinfo[cnt].gen);
+
+ if (map->l_tls_offset == NO_TLS_OFFSET)
+ {
+ /* For dynamically loaded modules we simply store
+ the value indicating deferred allocation. */
+ dtv[map->l_tls_modid].pointer.val = TLS_DTV_UNALLOCATED;
+ dtv[map->l_tls_modid].pointer.is_static = false;
+ continue;
+ }
+
+ assert (map->l_tls_modid == cnt);
+ assert (map->l_tls_blocksize >= map->l_tls_initimage_size);
+# if defined(TLS_TCB_AT_TP)
+ assert ((size_t) map->l_tls_offset >= map->l_tls_blocksize);
+ dest = (char *) result - map->l_tls_offset;
+# elif defined(TLS_DTV_AT_TP)
+ dest = (char *) result + map->l_tls_offset;
+# else
+# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined"
+# endif
+
+ /* Copy the initialization image and clear the BSS part. */
+ dtv[map->l_tls_modid].pointer.val = dest;
+ dtv[map->l_tls_modid].pointer.is_static = true;
+ _dl_memset (_dl_mempcpy (dest, map->l_tls_initimage,
+ map->l_tls_initimage_size), '\0',
+ map->l_tls_blocksize - map->l_tls_initimage_size);
+ }
+
+ total += cnt;
+ if (total >= GL(dl_tls_max_dtv_idx))
+ break;
+
+ listp = listp->next;
+ assert (listp != NULL);
+ }
+
+ /* The DTV version is up-to-date now. */
+ dtv[0].counter = maxgen;
+
+ return result;
+}
+
+void *
+internal_function
+_dl_allocate_tls (void *mem)
+{
+ return _dl_allocate_tls_init (mem == NULL
+ ? _dl_allocate_tls_storage ()
+ : allocate_dtv (mem));
+}
+
+
+void
+internal_function
+_dl_deallocate_tls (void *tcb, bool dealloc_tcb)
+{
+ dtv_t *dtv = GET_DTV (tcb);
+ size_t cnt;
+
+ /* We need to free the memory allocated for non-static TLS. */
+ for (cnt = 0; cnt < dtv[-1].counter; ++cnt)
+ if (! dtv[1 + cnt].pointer.is_static
+ && dtv[1 + cnt].pointer.val != TLS_DTV_UNALLOCATED)
+ free (dtv[1 + cnt].pointer.val);
+
+ /* The array starts with dtv[-1]. */
+#ifdef SHARED
+ if (dtv != GL(dl_initial_dtv))
+#endif
+ free (dtv - 1);
+
+ if (dealloc_tcb)
+ {
+# if defined(TLS_TCB_AT_TP)
+ /* The TCB follows the TLS blocks. Back up to free the whole block. */
+ tcb -= GL(dl_tls_static_size) - TLS_TCB_SIZE;
+# elif defined(TLS_DTV_AT_TP)
+ /* Back up the TLS_PRE_TCB_SIZE bytes. */
+ tcb -= (TLS_PRE_TCB_SIZE + GL(dl_tls_static_align) - 1)
+ & ~(GL(dl_tls_static_align) - 1);
+# endif
+ free (tcb);
+ }
+}
+
+
+# ifdef SHARED
+/* The __tls_get_addr function has two basic forms which differ in the
+ arguments. The IA-64 form takes two parameters, the module ID and
+ offset. The form used, among others, on IA-32 takes a reference to
+ a special structure which contain the same information. The second
+ form seems to be more often used (in the moment) so we default to
+ it. Users of the IA-64 form have to provide adequate definitions
+ of the following macros. */
+# ifndef GET_ADDR_ARGS
+# define GET_ADDR_ARGS tls_index *ti
+# endif
+# ifndef GET_ADDR_MODULE
+# define GET_ADDR_MODULE ti->ti_module
+# endif
+# ifndef GET_ADDR_OFFSET
+# define GET_ADDR_OFFSET ti->ti_offset
+# endif
+
+
+static void *
+allocate_and_init (struct link_map *map)
+{
+ void *newp;
+
+ newp = _dl_memalign (map->l_tls_align, map->l_tls_blocksize);
+ if (newp == NULL)
+ oom ();
+
+ /* Initialize the memory. */
+ _dl_memset (_dl_mempcpy (newp, map->l_tls_initimage, map->l_tls_initimage_size),
+ '\0', map->l_tls_blocksize - map->l_tls_initimage_size);
+
+ return newp;
+}
+
+
+struct link_map *
+_dl_update_slotinfo (unsigned long int req_modid)
+{
+ struct link_map *the_map = NULL;
+ dtv_t *dtv = THREAD_DTV ();
+
+ /* The global dl_tls_dtv_slotinfo array contains for each module
+ index the generation counter current when the entry was created.
+ This array never shrinks so that all module indices which were
+ valid at some time can be used to access it. Before the first
+ use of a new module index in this function the array was extended
+ appropriately. Access also does not have to be guarded against
+ modifications of the array. It is assumed that pointer-size
+ values can be read atomically even in SMP environments. It is
+ possible that other threads at the same time dynamically load
+ code and therefore add to the slotinfo list. This is a problem
+ since we must not pick up any information about incomplete work.
+ The solution to this is to ignore all dtv slots which were
+ created after the one we are currently interested. We know that
+ dynamic loading for this module is completed and this is the last
+ load operation we know finished. */
+ unsigned long int idx = req_modid;
+ struct dtv_slotinfo_list *listp = GL(dl_tls_dtv_slotinfo_list);
+
+ while (idx >= listp->len)
+ {
+ idx -= listp->len;
+ listp = listp->next;
+ }
+
+ if (dtv[0].counter < listp->slotinfo[idx].gen)
+ {
+ /* The generation counter for the slot is higher than what the
+ current dtv implements. We have to update the whole dtv but
+ only those entries with a generation counter <= the one for
+ the entry we need. */
+ size_t new_gen = listp->slotinfo[idx].gen;
+ size_t total = 0;
+
+ /* We have to look through the entire dtv slotinfo list. */
+ listp = GL(dl_tls_dtv_slotinfo_list);
+ do
+ {
+ size_t cnt;
+
+ for (cnt = total == 0 ? 1 : 0; cnt < listp->len; ++cnt)
+ {
+ size_t gen = listp->slotinfo[cnt].gen;
+
+ if (gen > new_gen)
+ /* This is a slot for a generation younger than the
+ one we are handling now. It might be incompletely
+ set up so ignore it. */
+ continue;
+
+ /* If the entry is older than the current dtv layout we
+ know we don't have to handle it. */
+ if (gen <= dtv[0].counter)
+ continue;
+
+ /* If there is no map this means the entry is empty. */
+ struct link_map *map = listp->slotinfo[cnt].map;
+ if (map == NULL)
+ {
+ /* If this modid was used at some point the memory
+ might still be allocated. */
+ if (! dtv[total + cnt].pointer.is_static
+ && dtv[total + cnt].pointer.val != TLS_DTV_UNALLOCATED)
+ {
+ free (dtv[total + cnt].pointer.val);
+ dtv[total + cnt].pointer.val = TLS_DTV_UNALLOCATED;
+ }
+
+ continue;
+ }
+
+ /* Check whether the current dtv array is large enough. */
+ size_t modid = map->l_tls_modid;
+ assert (total + cnt == modid);
+ if (dtv[-1].counter < modid)
+ {
+ /* Reallocate the dtv. */
+ dtv_t *newp;
+ size_t newsize = GL(dl_tls_max_dtv_idx) + DTV_SURPLUS;
+ size_t oldsize = dtv[-1].counter;
+
+ assert (map->l_tls_modid <= newsize);
+
+ if (dtv == GL(dl_initial_dtv))
+ {
+ /* This is the initial dtv that was allocated
+ during rtld startup using the dl-minimal.c
+ malloc instead of the real malloc. We can't
+ free it, we have to abandon the old storage. */
+
+ newp = malloc ((2 + newsize) * sizeof (dtv_t));
+ if (newp == NULL)
+ oom ();
+ _dl_memcpy (newp, &dtv[-1], oldsize * sizeof (dtv_t));
+ }
+ else
+ {
+ newp = realloc (&dtv[-1],
+ (2 + newsize) * sizeof (dtv_t));
+ if (newp == NULL)
+ oom ();
+ }
+
+ newp[0].counter = newsize;
+
+ /* Clear the newly allocated part. */
+ _dl_memset (newp + 2 + oldsize, '\0',
+ (newsize - oldsize) * sizeof (dtv_t));
+
+ /* Point dtv to the generation counter. */
+ dtv = &newp[1];
+
+ /* Install this new dtv in the thread data
+ structures. */
+ INSTALL_NEW_DTV (dtv);
+ }
+
+ /* If there is currently memory allocate for this
+ dtv entry free it. */
+ /* XXX Ideally we will at some point create a memory
+ pool. */
+ if (! dtv[modid].pointer.is_static
+ && dtv[modid].pointer.val != TLS_DTV_UNALLOCATED)
+ /* Note that free is called for NULL is well. We
+ deallocate even if it is this dtv entry we are
+ supposed to load. The reason is that we call
+ memalign and not malloc. */
+ free (dtv[modid].pointer.val);
+
+ /* This module is loaded dynamically- We defer memory
+ allocation. */
+ dtv[modid].pointer.is_static = false;
+ dtv[modid].pointer.val = TLS_DTV_UNALLOCATED;
+
+ if (modid == req_modid)
+ the_map = map;
+ }
+
+ total += listp->len;
+ }
+ while ((listp = listp->next) != NULL);
+
+ /* This will be the new maximum generation counter. */
+ dtv[0].counter = new_gen;
+ }
+
+ return the_map;
+}
+
+
+/* The generic dynamic and local dynamic model cannot be used in
+ statically linked applications. */
+void *
+__tls_get_addr (GET_ADDR_ARGS)
+{
+ dtv_t *dtv = THREAD_DTV ();
+ struct link_map *the_map = NULL;
+ void *p;
+
+ if (__builtin_expect (dtv[0].counter != GL(dl_tls_generation), 0))
+ the_map = _dl_update_slotinfo (GET_ADDR_MODULE);
+
+ p = dtv[GET_ADDR_MODULE].pointer.val;
+
+ if (__builtin_expect (p == TLS_DTV_UNALLOCATED, 0))
+ {
+ /* The allocation was deferred. Do it now. */
+ if (the_map == NULL)
+ {
+ /* Find the link map for this module. */
+ size_t idx = GET_ADDR_MODULE;
+ struct dtv_slotinfo_list *listp = GL(dl_tls_dtv_slotinfo_list);
+
+ while (idx >= listp->len)
+ {
+ idx -= listp->len;
+ listp = listp->next;
+ }
+
+ the_map = listp->slotinfo[idx].map;
+ }
+
+ p = dtv[GET_ADDR_MODULE].pointer.val = allocate_and_init (the_map);
+ dtv[GET_ADDR_MODULE].pointer.is_static = false;
+ }
+
+ return (char *) p + GET_ADDR_OFFSET;
+}
+# endif
+
+
+
+void _dl_add_to_slotinfo (struct link_map *l);
+void
+_dl_add_to_slotinfo (struct link_map *l)
+{
+ /* Now that we know the object is loaded successfully add
+ modules containing TLS data to the dtv info table. We
+ might have to increase its size. */
+ struct dtv_slotinfo_list *listp;
+ struct dtv_slotinfo_list *prevp;
+ size_t idx = l->l_tls_modid;
+
+ /* Find the place in the dtv slotinfo list. */
+ listp = GL(dl_tls_dtv_slotinfo_list);
+ prevp = NULL; /* Needed to shut up gcc. */
+ do
+ {
+ /* Does it fit in the array of this list element? */
+ if (idx < listp->len)
+ break;
+ idx -= listp->len;
+ prevp = listp;
+ listp = listp->next;
+ }
+ while (listp != NULL);
+
+ if (listp == NULL)
+ {
+ /* When we come here it means we have to add a new element
+ to the slotinfo list. And the new module must be in
+ the first slot. */
+ assert (idx == 0);
+
+ listp = prevp->next = (struct dtv_slotinfo_list *)
+ malloc (sizeof (struct dtv_slotinfo_list)
+ + TLS_SLOTINFO_SURPLUS * sizeof (struct dtv_slotinfo));
+ if (listp == NULL)
+ {
+ /* We ran out of memory. We will simply fail this
+ call but don't undo anything we did so far. The
+ application will crash or be terminated anyway very
+ soon. */
+
+ /* We have to do this since some entries in the dtv
+ slotinfo array might already point to this
+ generation. */
+ ++GL(dl_tls_generation);
+
+ _dl_dprintf (_dl_debug_file,
+ "cannot create TLS data structures: ABORT\n");
+ _dl_exit (127);
+ }
+
+ listp->len = TLS_SLOTINFO_SURPLUS;
+ listp->next = NULL;
+ _dl_memset (listp->slotinfo, '\0',
+ TLS_SLOTINFO_SURPLUS * sizeof (struct dtv_slotinfo));
+ }
+
+ /* Add the information into the slotinfo data structure. */
+ listp->slotinfo[idx].map = l;
+ listp->slotinfo[idx].gen = GL(dl_tls_generation) + 1;
+}
diff --git a/ap/build/uClibc/libpthread/nptl/sysdeps/generic/dl-tls.h b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/dl-tls.h
new file mode 100644
index 0000000..7703a97
--- /dev/null
+++ b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/dl-tls.h
@@ -0,0 +1,2 @@
+/* There has to be an architecture specific version of this file. */
+#error "architecture-specific version of <dl-tls.h> missing"
diff --git a/ap/build/uClibc/libpthread/nptl/sysdeps/generic/libc-tls.c b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/libc-tls.c
new file mode 100644
index 0000000..e14fc26
--- /dev/null
+++ b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/libc-tls.c
@@ -0,0 +1,267 @@
+/* Initialization code for TLS in statically linked application.
+ Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+
+#include <errno.h>
+#include <ldsodefs.h>
+#include <tls.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/param.h>
+#include <elf.h>
+#include <link.h>
+#include <string.h>
+#include <stdlib.h>
+
+
+#ifdef SHARED
+ #error makefile bug, this file is for static only
+#endif
+
+#if USE_TLS
+extern ElfW(Phdr) *_dl_phdr;
+extern size_t _dl_phnum;
+
+
+static dtv_t static_dtv[2 + TLS_SLOTINFO_SURPLUS];
+
+
+static struct
+{
+ struct dtv_slotinfo_list si;
+ /* The dtv_slotinfo_list data structure does not include the actual
+ information since it is defined as an array of size zero. We define
+ here the necessary entries. Note that it is not important whether
+ there is padding or not since we will always access the information
+ through the 'si' element. */
+ struct dtv_slotinfo info[2 + TLS_SLOTINFO_SURPLUS];
+} static_slotinfo;
+
+/* Fake link map for the application. */
+static struct link_map static_map;
+
+
+/* Highest dtv index currently needed. */
+size_t _dl_tls_max_dtv_idx;
+/* Flag signalling whether there are gaps in the module ID allocation. */
+bool _dl_tls_dtv_gaps;
+/* Information about the dtv slots. */
+struct dtv_slotinfo_list *_dl_tls_dtv_slotinfo_list;
+/* Number of modules in the static TLS block. */
+size_t _dl_tls_static_nelem;
+/* Size of the static TLS block. */
+size_t _dl_tls_static_size;
+/* Size actually allocated in the static TLS block. */
+size_t _dl_tls_static_used;
+/* Alignment requirement of the static TLS block. */
+size_t _dl_tls_static_align;
+
+/* Generation counter for the dtv. */
+size_t _dl_tls_generation;
+
+
+/* Additional definitions needed by TLS initialization. */
+#ifdef TLS_INIT_HELPER
+TLS_INIT_HELPER
+#endif
+
+static inline void
+init_slotinfo (void)
+{
+ /* Create the slotinfo list. */
+ static_slotinfo.si.len = (((char *) (&static_slotinfo + 1)
+ - (char *) &static_slotinfo.si.slotinfo[0])
+ / sizeof static_slotinfo.si.slotinfo[0]);
+ // static_slotinfo.si.next = NULL; already zero
+
+ /* The slotinfo list. Will be extended by the code doing dynamic
+ linking. */
+ GL(dl_tls_max_dtv_idx) = 1;
+ GL(dl_tls_dtv_slotinfo_list) = &static_slotinfo.si;
+}
+
+static inline void
+init_static_tls (size_t memsz, size_t align)
+{
+ /* That is the size of the TLS memory for this object. The initialized
+ value of _dl_tls_static_size is provided by dl-open.c to request some
+ surplus that permits dynamic loading of modules with IE-model TLS. */
+ GL(dl_tls_static_size) = roundup (memsz + GL(dl_tls_static_size),
+ TLS_TCB_ALIGN);
+ GL(dl_tls_static_used) = memsz;
+ /* The alignment requirement for the static TLS block. */
+ GL(dl_tls_static_align) = align;
+ /* Number of elements in the static TLS block. */
+ GL(dl_tls_static_nelem) = GL(dl_tls_max_dtv_idx);
+}
+
+void __libc_setup_tls (size_t tcbsize, size_t tcbalign);
+void
+__libc_setup_tls (size_t tcbsize, size_t tcbalign)
+{
+ void *tlsblock;
+ size_t memsz = 0;
+ size_t filesz = 0;
+ void *initimage = NULL;
+ size_t align = 0;
+ size_t max_align = tcbalign;
+ size_t tcb_offset;
+ ElfW(Phdr) *phdr;
+
+ /* Look through the TLS segment if there is any. */
+ if (_dl_phdr != NULL)
+ for (phdr = _dl_phdr; phdr < &_dl_phdr[_dl_phnum]; ++phdr)
+ if (phdr->p_type == PT_TLS)
+ {
+ /* Remember the values we need. */
+ memsz = phdr->p_memsz;
+ filesz = phdr->p_filesz;
+ initimage = (void *) phdr->p_vaddr;
+ align = phdr->p_align;
+ if (phdr->p_align > max_align)
+ max_align = phdr->p_align;
+ break;
+ }
+
+ /* We have to set up the TCB block which also (possibly) contains
+ 'errno'. Therefore we avoid 'malloc' which might touch 'errno'.
+ Instead we use 'sbrk' which would only uses 'errno' if it fails.
+ In this case we are right away out of memory and the user gets
+ what she/he deserves.
+
+ The initialized value of _dl_tls_static_size is provided by dl-open.c
+ to request some surplus that permits dynamic loading of modules with
+ IE-model TLS. */
+# if defined(TLS_TCB_AT_TP)
+ tcb_offset = roundup (memsz + GL(dl_tls_static_size), tcbalign);
+ tlsblock = sbrk (tcb_offset + tcbsize + max_align);
+# elif defined(TLS_DTV_AT_TP)
+ tcb_offset = roundup (tcbsize, align ?: 1);
+ tlsblock = sbrk (tcb_offset + memsz + max_align
+ + TLS_PRE_TCB_SIZE + GL(dl_tls_static_size));
+ tlsblock += TLS_PRE_TCB_SIZE;
+# else
+ /* In case a model with a different layout for the TCB and DTV
+ is defined add another #elif here and in the following #ifs. */
+# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined"
+# endif
+
+ /* Align the TLS block. */
+ tlsblock = (void *) (((uintptr_t) tlsblock + max_align - 1)
+ & ~(max_align - 1));
+
+ /* Initialize the dtv. [0] is the length, [1] the generation counter. */
+ static_dtv[0].counter = (sizeof (static_dtv) / sizeof (static_dtv[0])) - 2;
+ // static_dtv[1].counter = 0; would be needed if not already done
+
+ /* Initialize the TLS block. */
+# if defined(TLS_TCB_AT_TP)
+ static_dtv[2].pointer.val = ((char *) tlsblock + tcb_offset
+ - roundup (memsz, align ?: 1));
+ static_map.l_tls_offset = roundup (memsz, align ?: 1);
+# elif defined(TLS_DTV_AT_TP)
+ static_dtv[2].pointer.val = (char *) tlsblock + tcb_offset;
+ static_map.l_tls_offset = tcb_offset;
+# else
+# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined"
+# endif
+ static_dtv[2].pointer.is_static = true;
+ /* sbrk gives us zero'd memory, so we don't need to clear the remainder. */
+ memcpy (static_dtv[2].pointer.val, initimage, filesz);
+
+ /* Install the pointer to the dtv. */
+
+ /* Initialize the thread pointer. */
+# if defined(TLS_TCB_AT_TP)
+ INSTALL_DTV ((char *) tlsblock + tcb_offset, static_dtv);
+
+ const char *lossage = TLS_INIT_TP ((char *) tlsblock + tcb_offset, 0);
+# elif defined(TLS_DTV_AT_TP)
+ INSTALL_DTV (tlsblock, static_dtv);
+ const char *lossage = (char *)TLS_INIT_TP (tlsblock, 0);
+# else
+# error "Either TLS_TCB_AT_TP or TLS_DTV_AT_TP must be defined"
+# endif
+ if (__builtin_expect (lossage != NULL, 0))
+ abort();
+
+ /* We have to create a fake link map which normally would be created
+ by the dynamic linker. It just has to have enough information to
+ make the TLS routines happy. */
+ static_map.l_tls_align = align;
+ static_map.l_tls_blocksize = memsz;
+ static_map.l_tls_initimage = initimage;
+ static_map.l_tls_initimage_size = filesz;
+ static_map.l_tls_modid = 1;
+
+ init_slotinfo ();
+ // static_slotinfo.si.slotinfo[1].gen = 0; already zero
+ static_slotinfo.si.slotinfo[1].map = &static_map;
+
+ memsz = roundup (memsz, align ?: 1);
+
+# if defined(TLS_TCB_AT_TP)
+ memsz += tcbsize;
+# elif defined(TLS_DTV_AT_TP)
+ memsz += tcb_offset;
+# endif
+
+ init_static_tls (memsz, MAX (TLS_TCB_ALIGN, max_align));
+}
+
+/* This is called only when the data structure setup was skipped at startup,
+ when there was no need for it then. Now we have dynamically loaded
+ something needing TLS, or libpthread needs it. */
+int
+internal_function
+_dl_tls_setup (void)
+{
+ init_slotinfo ();
+ init_static_tls (
+# if defined(TLS_TCB_AT_TP)
+ TLS_TCB_SIZE,
+# else
+ 0,
+# endif
+ TLS_TCB_ALIGN);
+ return 0;
+}
+
+extern void __pthread_initialize_minimal(void) __attribute__((weak));
+
+/* This is the minimal initialization function used when libpthread is
+ not used. */
+void
+__attribute__ ((weak))
+__pthread_initialize_minimal (void)
+{
+ __libc_setup_tls (TLS_INIT_TCB_SIZE, TLS_INIT_TCB_ALIGN);
+}
+
+#elif defined NONTLS_INIT_TP
+
+/* This is the minimal initialization function used when libpthread is
+ not used. */
+void
+__attribute__ ((weak))
+__pthread_initialize_minimal (void)
+{
+ NONTLS_INIT_TP;
+}
+
+#endif
diff --git a/ap/build/uClibc/libpthread/nptl/sysdeps/generic/lowlevellock.h b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/lowlevellock.h
new file mode 100644
index 0000000..0600e17
--- /dev/null
+++ b/ap/build/uClibc/libpthread/nptl/sysdeps/generic/lowlevellock.h
@@ -0,0 +1,84 @@
+/* Low level locking macros used in NPTL implementation. Stub version.
+ Copyright (C) 2002, 2007 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+ Contributed by Ulrich Drepper <drepper@redhat.com>, 2002.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+
+#include <atomic.h>
+
+
+/* Mutex lock counter:
+ bit 31 clear means unlocked;
+ bit 31 set means locked.
+
+ All code that looks at bit 31 first increases the 'number of
+ interested threads' usage counter, which is in bits 0-30.
+
+ All negative mutex values indicate that the mutex is still locked. */
+
+
+static inline void
+__generic_mutex_lock (int *mutex)
+{
+ unsigned int v;
+
+ /* Bit 31 was clear, we got the mutex. (this is the fastpath). */
+ if (atomic_bit_test_set (mutex, 31) == 0)
+ return;
+
+ atomic_increment (mutex);
+
+ while (1)
+ {
+ if (atomic_bit_test_set (mutex, 31) == 0)
+ {
+ atomic_decrement (mutex);
+ return;
+ }
+
+ /* We have to wait now. First make sure the futex value we are
+ monitoring is truly negative (i.e. locked). */
+ v = *mutex;
+ if (v >= 0)
+ continue;
+
+ lll_futex_wait (mutex, v,
+ // XYZ check mutex flag
+ LLL_SHARED);
+ }
+}
+
+
+static inline void
+__generic_mutex_unlock (int *mutex)
+{
+ /* Adding 0x80000000 to the counter results in 0 if and only if
+ there are not other interested threads - we can return (this is
+ the fastpath). */
+ if (atomic_add_zero (mutex, 0x80000000))
+ return;
+
+ /* There are other threads waiting for this mutex, wake one of them
+ up. */
+ lll_futex_wake (mutex, 1,
+ // XYZ check mutex flag
+ LLL_SHARED);
+}
+
+
+#define lll_mutex_lock(futex) __generic_mutex_lock (&(futex))
+#define lll_mutex_unlock(futex) __generic_mutex_unlock (&(futex))