diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/CMakeLists.txt b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/CMakeLists.txt
new file mode 100644
index 0000000..5aa20df
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/CMakeLists.txt
@@ -0,0 +1,12 @@
+set(MANPAGE "${CMAKE_BINARY_DIR}/docs/curl.1")
+
+# Load DPAGES and OTHERPAGES from shared file
+transform_makefile_inc("Makefile.inc" "${CMAKE_CURRENT_BINARY_DIR}/Makefile.inc.cmake")
+include("${CMAKE_CURRENT_BINARY_DIR}/Makefile.inc.cmake")
+
+add_custom_command(OUTPUT "${MANPAGE}"
+  COMMAND "${PERL_EXECUTABLE}" "${CMAKE_CURRENT_SOURCE_DIR}/gen.pl" mainpage "${CMAKE_CURRENT_SOURCE_DIR}" > "${MANPAGE}"
+  DEPENDS ${DPAGES} ${OTHERPAGES}
+  VERBATIM
+)
+add_custom_target(generate-curl.1 DEPENDS "${MANPAGE}")
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/MANPAGE.md b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/MANPAGE.md
new file mode 100644
index 0000000..3a8270b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/MANPAGE.md
@@ -0,0 +1,52 @@
+# curl man page generator
+
+This is the curl man page generator. It generates a single nroff man page
+output from the set of sources files in this directory.
+
+There is one source file for each supported command line option. The format is
+described below.
+
+## Option files
+
+Each command line option is described in a file named `<long name>.d`, where
+option name is written without any prefixing dashes. Like the file name for
+the -v, --verbose option is named `verbose.d`.
+
+Each file has a set of meta-data and a body of text.
+
+### Meta-data
+
+    Short: (single letter, without dash)
+    Long: (long form name, without dashes)
+    Arg: (the argument the option takes)
+    Magic: (description of "magic" options)
+    Tags: (space separated list)
+    Protocols: (space separated list for which protocols this option works)
+    Added: (version number in which this was added)
+    Mutexed: (space separated list of options this overrides, no dashes)
+    Requires: (space separated list of features this requires, no dashes)
+    See-also: (space separated list of related options, no dashes)
+    Help: (short text for the --help output for this option)
+    --- (end of meta-data)
+
+### Body
+
+The body of the description. Only refer to options with their long form option
+version, like --verbose. The output generator will replace such with the
+correct markup that shows both short and long version.
+
+## Header
+
+`page-header` is the nroff formatted file that will be output before the
+generated options output for the master man page.
+
+## Generate
+
+`./gen.pl mainpage`
+
+This command outputs a single huge nroff file, meant to become `curl.1`. The
+full curl man page.
+
+`./gen.pl listhelp`
+
+Generates a full `curl --help` output for all known command line options.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.am b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.am
new file mode 100644
index 0000000..e6ecf7a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.am
@@ -0,0 +1,34 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
+
+AUTOMAKE_OPTIONS = foreign no-dependencies
+
+MANPAGE = $(top_builddir)/docs/curl.1
+
+include Makefile.inc
+
+EXTRA_DIST = $(DPAGES) MANPAGE.md gen.pl $(OTHERPAGES) CMakeLists.txt
+
+all: $(MANPAGE)
+
+$(MANPAGE): $(DPAGES) $(OTHERPAGES) Makefile.inc
+	@PERL@ $(srcdir)/gen.pl mainpage $(srcdir) > $(MANPAGE)
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.in b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.in
new file mode 100644
index 0000000..4378e18
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.in
@@ -0,0 +1,610 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
+
+# Shared between Makefile.am and CMakeLists.txt
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = docs/cmdline-opts
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \
+	$(top_srcdir)/m4/curl-compilers.m4 \
+	$(top_srcdir)/m4/curl-confopts.m4 \
+	$(top_srcdir)/m4/curl-functions.m4 \
+	$(top_srcdir)/m4/curl-openssl.m4 \
+	$(top_srcdir)/m4/curl-override.m4 \
+	$(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/xc-am-iface.m4 \
+	$(top_srcdir)/m4/xc-cc-check.m4 \
+	$(top_srcdir)/m4/xc-lt-iface.m4 \
+	$(top_srcdir)/m4/xc-translit.m4 \
+	$(top_srcdir)/m4/xc-val-flgs.m4 \
+	$(top_srcdir)/m4/zz40-xc-ovr.m4 \
+	$(top_srcdir)/m4/zz50-xc-ovr.m4 \
+	$(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \
+	$(top_builddir)/include/curl/curlbuild.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+depcomp =
+am__depfiles_maybe =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.inc
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
+CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@
+CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@
+CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@
+CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
+CURLVERSION = @CURLVERSION@
+CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
+CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
+CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
+CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
+CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
+CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
+CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
+CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
+CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
+CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
+CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
+CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
+CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
+CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
+CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
+CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
+CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
+CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
+CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
+CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_SHARED = @ENABLE_SHARED@
+ENABLE_STATIC = @ENABLE_STATIC@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GENHTML = @GENHTML@
+GREP = @GREP@
+HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
+HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
+HAVE_LIBZ = @HAVE_LIBZ@
+HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
+IDN_ENABLED = @IDN_ENABLED@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPV6_ENABLED = @IPV6_ENABLED@
+LCOV = @LCOV@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBCURL_LIBS = @LIBCURL_LIBS@
+LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
+LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
+LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANOPT = @MANOPT@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NROFF = @NROFF@
+NSS_LIBS = @NSS_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKGADD_NAME = @PKGADD_NAME@
+PKGADD_PKG = @PKGADD_PKG@
+PKGADD_VENDOR = @PKGADD_VENDOR@
+PKGCONFIG = @PKGCONFIG@
+RANDOM_FILE = @RANDOM_FILE@
+RANLIB = @RANLIB@
+REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SSL_ENABLED = @SSL_ENABLED@
+SSL_LIBS = @SSL_LIBS@
+STRIP = @STRIP@
+SUPPORT_FEATURES = @SUPPORT_FEATURES@
+SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
+USE_ARES = @USE_ARES@
+USE_AXTLS = @USE_AXTLS@
+USE_CYASSL = @USE_CYASSL@
+USE_DARWINSSL = @USE_DARWINSSL@
+USE_GNUTLS = @USE_GNUTLS@
+USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
+USE_LIBRTMP = @USE_LIBRTMP@
+USE_LIBSSH2 = @USE_LIBSSH2@
+USE_MBEDTLS = @USE_MBEDTLS@
+USE_NGHTTP2 = @USE_NGHTTP2@
+USE_NSS = @USE_NSS@
+USE_OPENLDAP = @USE_OPENLDAP@
+USE_POLARSSL = @USE_POLARSSL@
+USE_SCHANNEL = @USE_SCHANNEL@
+USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
+USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
+VERSION = @VERSION@
+VERSIONNUM = @VERSIONNUM@
+ZLIB_LIBS = @ZLIB_LIBS@
+ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libext = @libext@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign no-dependencies
+MANPAGE = $(top_builddir)/docs/curl.1
+DPAGES = abstract-unix-socket.d anyauth.d append.d basic.d cacert.d capath.d cert.d \
+  cert-status.d cert-type.d ciphers.d compressed.d config.d             \
+  connect-timeout.d connect-to.d continue-at.d cookie.d cookie-jar.d    \
+  create-dirs.d crlf.d crlfile.d data-ascii.d data-binary.d data.d      \
+  data-raw.d data-urlencode.d delegation.d digest.d disable.d           \
+  disable-eprt.d disable-epsv.d dns-interface.d dns-ipv4-addr.d         \
+  dns-ipv6-addr.d dns-servers.d dump-header.d egd-file.d engine.d       \
+  expect100-timeout.d fail.d fail-early.d false-start.d                 \
+  form.d form-string.d ftp-account.d ftp-alternative-to-user.d          \
+  ftp-create-dirs.d ftp-method.d ftp-pasv.d ftp-port.d ftp-pret.d       \
+  ftp-skip-pasv-ip.d ftp-ssl-ccc.d ftp-ssl-ccc-mode.d ftp-ssl-control.d \
+  get.d globoff.d head.d header.d help.d hostpubmd5.d http1.0.d         \
+  http1.1.d http2.d http2-prior-knowledge.d ignore-content-length.d     \
+  include.d insecure.d interface.d ipv4.d ipv6.d junk-session-cookies.d \
+  keepalive-time.d key.d key-type.d krb.d libcurl.d limit-rate.d        \
+  list-only.d local-port.d location.d location-trusted.d                \
+  login-options.d mail-auth.d mail-from.d mail-rcpt.d manual.d          \
+  max-filesize.d max-redirs.d max-time.d metalink.d negotiate.d netrc.d \
+  netrc-file.d netrc-optional.d next.d no-alpn.d no-buffer.d            \
+  no-keepalive.d no-npn.d noproxy.d no-sessionid.d ntlm.d ntlm-wb.d     \
+  oauth2-bearer.d output.d pass.d path-as-is.d pinnedpubkey.d post301.d \
+  post302.d post303.d preproxy.d progress-bar.d proto.d proto-default.d \
+  proto-redir.d proxy1.0.d proxy-anyauth.d proxy-basic.d proxy-cacert.d \
+  proxy-capath.d proxy-cert.d proxy-cert-type.d proxy-ciphers.d         \
+  proxy-crlfile.d proxy.d proxy-digest.d proxy-header.d                 \
+  proxy-insecure.d proxy-key.d proxy-key-type.d proxy-negotiate.d       \
+  proxy-ntlm.d proxy-pass.d proxy-service-name.d                        \
+  proxy-ssl-allow-beast.d proxy-tlsauthtype.d proxy-tlspassword.d       \
+  proxy-tlsuser.d proxy-tlsv1.d proxytunnel.d proxy-user.d pubkey.d     \
+  quote.d random-file.d range.d raw.d referer.d remote-header-name.d    \
+  remote-name-all.d remote-name.d remote-time.d request.d resolve.d     \
+  retry-connrefused.d retry.d retry-delay.d retry-max-time.d sasl-ir.d  \
+  service-name.d show-error.d silent.d socks4a.d socks4.d socks5.d      \
+  socks5-gssapi-nec.d socks5-gssapi-service.d socks5-hostname.d         \
+  speed-limit.d speed-time.d ssl-allow-beast.d ssl.d ssl-no-revoke.d    \
+  ssl-reqd.d sslv2.d sslv3.d stderr.d suppress-connect-headers.d        \
+  tcp-fastopen.d tcp-nodelay.d                                          \
+  telnet-option.d tftp-blksize.d tftp-no-options.d time-cond.d          \
+  tls-max.d                                                             \
+  tlsauthtype.d tlspassword.d tlsuser.d tlsv1.0.d tlsv1.1.d tlsv1.2.d   \
+  tlsv1.3.d tlsv1.d trace-ascii.d trace.d trace-time.d tr-encoding.d    \
+  unix-socket.d upload-file.d url.d use-ascii.d user-agent.d user.d     \
+  verbose.d version.d write-out.d xattr.d
+
+OTHERPAGES = page-footer page-header
+EXTRA_DIST = $(DPAGES) MANPAGE.md gen.pl $(OTHERPAGES) CMakeLists.txt
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/Makefile.inc $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/cmdline-opts/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign docs/cmdline-opts/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(srcdir)/Makefile.inc $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+all: $(MANPAGE)
+
+$(MANPAGE): $(DPAGES) $(OTHERPAGES) Makefile.inc
+	@PERL@ $(srcdir)/gen.pl mainpage $(srcdir) > $(MANPAGE)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.inc b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.inc
new file mode 100644
index 0000000..4577fac
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/Makefile.inc
@@ -0,0 +1,47 @@
+# Shared between Makefile.am and CMakeLists.txt
+
+DPAGES = abstract-unix-socket.d anyauth.d append.d basic.d cacert.d capath.d cert.d \
+  cert-status.d cert-type.d ciphers.d compressed.d config.d             \
+  connect-timeout.d connect-to.d continue-at.d cookie.d cookie-jar.d    \
+  create-dirs.d crlf.d crlfile.d data-ascii.d data-binary.d data.d      \
+  data-raw.d data-urlencode.d delegation.d digest.d disable.d           \
+  disable-eprt.d disable-epsv.d dns-interface.d dns-ipv4-addr.d         \
+  dns-ipv6-addr.d dns-servers.d dump-header.d egd-file.d engine.d       \
+  expect100-timeout.d fail.d fail-early.d false-start.d                 \
+  form.d form-string.d ftp-account.d ftp-alternative-to-user.d          \
+  ftp-create-dirs.d ftp-method.d ftp-pasv.d ftp-port.d ftp-pret.d       \
+  ftp-skip-pasv-ip.d ftp-ssl-ccc.d ftp-ssl-ccc-mode.d ftp-ssl-control.d \
+  get.d globoff.d head.d header.d help.d hostpubmd5.d http1.0.d         \
+  http1.1.d http2.d http2-prior-knowledge.d ignore-content-length.d     \
+  include.d insecure.d interface.d ipv4.d ipv6.d junk-session-cookies.d \
+  keepalive-time.d key.d key-type.d krb.d libcurl.d limit-rate.d        \
+  list-only.d local-port.d location.d location-trusted.d                \
+  login-options.d mail-auth.d mail-from.d mail-rcpt.d manual.d          \
+  max-filesize.d max-redirs.d max-time.d metalink.d negotiate.d netrc.d \
+  netrc-file.d netrc-optional.d next.d no-alpn.d no-buffer.d            \
+  no-keepalive.d no-npn.d noproxy.d no-sessionid.d ntlm.d ntlm-wb.d     \
+  oauth2-bearer.d output.d pass.d path-as-is.d pinnedpubkey.d post301.d \
+  post302.d post303.d preproxy.d progress-bar.d proto.d proto-default.d \
+  proto-redir.d proxy1.0.d proxy-anyauth.d proxy-basic.d proxy-cacert.d \
+  proxy-capath.d proxy-cert.d proxy-cert-type.d proxy-ciphers.d         \
+  proxy-crlfile.d proxy.d proxy-digest.d proxy-header.d                 \
+  proxy-insecure.d proxy-key.d proxy-key-type.d proxy-negotiate.d       \
+  proxy-ntlm.d proxy-pass.d proxy-service-name.d                        \
+  proxy-ssl-allow-beast.d proxy-tlsauthtype.d proxy-tlspassword.d       \
+  proxy-tlsuser.d proxy-tlsv1.d proxytunnel.d proxy-user.d pubkey.d     \
+  quote.d random-file.d range.d raw.d referer.d remote-header-name.d    \
+  remote-name-all.d remote-name.d remote-time.d request.d resolve.d     \
+  retry-connrefused.d retry.d retry-delay.d retry-max-time.d sasl-ir.d  \
+  service-name.d show-error.d silent.d socks4a.d socks4.d socks5.d      \
+  socks5-gssapi-nec.d socks5-gssapi-service.d socks5-hostname.d         \
+  speed-limit.d speed-time.d ssl-allow-beast.d ssl.d ssl-no-revoke.d    \
+  ssl-reqd.d sslv2.d sslv3.d stderr.d suppress-connect-headers.d        \
+  tcp-fastopen.d tcp-nodelay.d                                          \
+  telnet-option.d tftp-blksize.d tftp-no-options.d time-cond.d          \
+  tls-max.d                                                             \
+  tlsauthtype.d tlspassword.d tlsuser.d tlsv1.0.d tlsv1.1.d tlsv1.2.d   \
+  tlsv1.3.d tlsv1.d trace-ascii.d trace.d trace-time.d tr-encoding.d    \
+  unix-socket.d upload-file.d url.d use-ascii.d user-agent.d user.d     \
+  verbose.d version.d write-out.d xattr.d
+
+OTHERPAGES = page-footer page-header
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/abstract-unix-socket.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/abstract-unix-socket.d
new file mode 100644
index 0000000..1fda4e5
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/abstract-unix-socket.d
@@ -0,0 +1,9 @@
+Long: abstract-unix-socket
+Arg: <path>
+Help: Connect via abstract Unix domain socket
+Added: 7.53.0
+Protocols: HTTP
+---
+Connect through an abstract Unix domain socket, instead of using the network.
+Note: netstat shows the path of an abstract socket prefixed with '@', however
+the <path> argument should not have this leading character.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/anyauth.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/anyauth.d
new file mode 100644
index 0000000..c32d1ed
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/anyauth.d
@@ -0,0 +1,17 @@
+Long: anyauth
+Help: Pick any authentication method
+Protocols: HTTP
+See-also: proxy-anyauth basic digest
+---
+Tells curl to figure out authentication method by itself, and use the most
+secure one the remote site claims to support. This is done by first doing a
+request and checking the response-headers, thus possibly inducing an extra
+network round-trip. This is used instead of setting a specific authentication
+method, which you can do with --basic, --digest, --ntlm, and --negotiate.
+
+Using --anyauth is not recommended if you do uploads from stdin, since it may
+require data to be sent twice and then the client must be able to rewind. If
+the need should arise when uploading from stdin, the upload operation will
+fail.
+
+Used together with --user.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/append.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/append.d
new file mode 100644
index 0000000..f001b12
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/append.d
@@ -0,0 +1,8 @@
+Short: a
+Long: append
+Help: Append to target file when uploading
+Protocols: FTP SFTP
+---
+When used in an upload, this makes curl append to the target file instead of
+overwriting it. If the remote file doesn't exist, it will be created.  Note
+that this flag is ignored by some SFTP servers (including OpenSSH).
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/basic.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/basic.d
new file mode 100644
index 0000000..09d42af
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/basic.d
@@ -0,0 +1,11 @@
+Long: basic
+Help: Use HTTP Basic Authentication
+See-also: proxy-basic
+Protocols: HTTP
+---
+Tells curl to use HTTP Basic authentication with the remote host. This is the
+default and this option is usually pointless, unless you use it to override a
+previously set option that sets a different authentication method (such as
+--ntlm, --digest, or --negotiate).
+
+Used together with --user.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cacert.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cacert.d
new file mode 100644
index 0000000..04e1139
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cacert.d
@@ -0,0 +1,28 @@
+Long: cacert
+Arg: <CA certificate>
+Help: CA certificate to verify peer against
+Protocols: TLS
+---
+Tells curl to use the specified certificate file to verify the peer. The file
+may contain multiple CA certificates. The certificate(s) must be in PEM
+format. Normally curl is built to use a default file for this, so this option
+is typically used to alter that default file.
+
+curl recognizes the environment variable named 'CURL_CA_BUNDLE' if it is
+set, and uses the given path as a path to a CA cert bundle. This option
+overrides that variable.
+
+The windows version of curl will automatically look for a CA certs file named
+\'curl-ca-bundle.crt\', either in the same directory as curl.exe, or in the
+Current Working Directory, or in any folder along your PATH.
+
+If curl is built against the NSS SSL library, the NSS PEM PKCS#11 module
+(libnsspem.so) needs to be available for this option to work properly.
+
+(iOS and macOS only) If curl is built against Secure Transport, then this
+option is supported for backward compatibility with other SSL engines, but it
+should not be set. If the option is not set, then curl will use the
+certificates in the system and user Keychain to verify the peer, which is the
+preferred method of verifying the peer's certificate chain.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/capath.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/capath.d
new file mode 100644
index 0000000..0763f7a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/capath.d
@@ -0,0 +1,15 @@
+Long: capath
+Arg: <dir>
+Help: CA directory to verify peer against
+Protocols: TLS
+---
+Tells curl to use the specified certificate directory to verify the
+peer. Multiple paths can be provided by separating them with ":" (e.g.
+\&"path1:path2:path3"). The certificates must be in PEM format, and if curl is
+built against OpenSSL, the directory must have been processed using the
+c_rehash utility supplied with OpenSSL. Using --capath can allow
+OpenSSL-powered curl to make SSL-connections much more efficiently than using
+--cacert if the --cacert file contains many CA certificates.
+
+If this option is set, the default capath value will be ignored, and if it is
+used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert-status.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert-status.d
new file mode 100644
index 0000000..f1aaa21
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert-status.d
@@ -0,0 +1,13 @@
+Long: cert-status
+Protocols: TLS
+Added: 7.41.0
+Help: Verify the status of the server certificate
+---
+Tells curl to verify the status of the server certificate by using the
+Certificate Status Request (aka. OCSP stapling) TLS extension.
+
+If this option is enabled and the server sends an invalid (e.g. expired)
+response, if the response suggests that the server certificate has been revoked,
+or no response at all is received, the verification fails.
+
+This is currently only implemented in the OpenSSL, GnuTLS and NSS backends.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert-type.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert-type.d
new file mode 100644
index 0000000..a04bdce
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert-type.d
@@ -0,0 +1,10 @@
+Long: cert-type
+Protocols: TLS
+Arg: <type>
+Help: Certificate file type (DER/PEM/ENG)
+See-also: cert key key-type
+---
+Tells curl what certificate type the provided certificate is in. PEM, DER and
+ENG are recognized types.  If not specified, PEM is assumed.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert.d
new file mode 100644
index 0000000..0cd5d53
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cert.d
@@ -0,0 +1,32 @@
+Short: E
+Long: cert
+Arg: <certificate[:password]>
+Help: Client certificate file and password
+Protocols: TLS
+See-also: cert-type key key-type
+---
+Tells curl to use the specified client certificate file when getting a file
+with HTTPS, FTPS or another SSL-based protocol. The certificate must be in
+PKCS#12 format if using Secure Transport, or PEM format if using any other
+engine.  If the optional password isn't specified, it will be queried for on
+the terminal. Note that this option assumes a \&"certificate" file that is the
+private key and the client certificate concatenated! See --cert and --key to
+specify them independently.
+
+If curl is built against the NSS SSL library then this option can tell
+curl the nickname of the certificate to use within the NSS database defined
+by the environment variable SSL_DIR (or by default /etc/pki/nssdb). If the
+NSS PEM PKCS#11 module (libnsspem.so) is available then PEM files may be
+loaded. If you want to use a file from the current directory, please precede
+it with "./" prefix, in order to avoid confusion with a nickname.  If the
+nickname contains ":", it needs to be preceded by "\\" so that it is not
+recognized as password delimiter.  If the nickname contains "\\", it needs to
+be escaped as "\\\\" so that it is not recognized as an escape character.
+
+(iOS and macOS only) If curl is built against Secure Transport, then the
+certificate string can either be the name of a certificate/private key in the
+system or user keychain, or the path to a PKCS#12-encoded certificate and
+private key. If you want to use a file from the current directory, please
+precede it with "./" prefix, in order to avoid confusion with a nickname.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ciphers.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ciphers.d
new file mode 100644
index 0000000..d3bac60
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ciphers.d
@@ -0,0 +1,11 @@
+Long: ciphers
+Arg: <list of ciphers>
+help: SSL ciphers to use
+Protocols: TLS
+---
+Specifies which ciphers to use in the connection. The list of ciphers must
+specify valid ciphers. Read up on SSL cipher list details on this URL:
+
+ https://curl.haxx.se/docs/ssl-ciphers.html
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/compressed.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/compressed.d
new file mode 100644
index 0000000..dc130c1
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/compressed.d
@@ -0,0 +1,7 @@
+Long: compressed
+Help: Request compressed response
+Protocols: HTTP
+---
+Request a compressed response using one of the algorithms curl supports, and
+save the uncompressed document.  If this option is used and the server sends
+an unsupported encoding, curl will report an error.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/config.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/config.d
new file mode 100644
index 0000000..105d628
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/config.d
@@ -0,0 +1,61 @@
+Long: config
+Arg: <file>
+Help: Read config from a file
+Short: K
+---
+
+Specify a text file to read curl arguments from. The command line arguments
+found in the text file will be used as if they were provided on the command
+line.
+
+Options and their parameters must be specified on the same line in the file,
+separated by whitespace, colon, or the equals sign. Long option names can
+optionally be given in the config file without the initial double dashes and
+if so, the colon or equals characters can be used as separators. If the option
+is specified with one or two dashes, there can be no colon or equals character
+between the option and its parameter.
+
+If the parameter is to contain whitespace, the parameter must be enclosed
+within quotes. Within double quotes, the following escape sequences are
+available: \\\\, \\", \\t, \\n, \\r and \\v. A backslash preceding any other
+letter is ignored. If the first column of a config line is a '#' character,
+the rest of the line will be treated as a comment. Only write one option per
+physical line in the config file.
+
+Specify the filename to --config as '-' to make curl read the file from stdin.
+
+Note that to be able to specify a URL in the config file, you need to specify
+it using the --url option, and not by simply writing the URL on its own
+line. So, it could look similar to this:
+
+url = "https://curl.haxx.se/docs/"
+
+When curl is invoked, it (unless --disable is used) checks for a default
+config file and uses it if found. The default config file is checked for in
+the following places in this order:
+
+1) curl tries to find the "home dir": It first checks for the CURL_HOME and
+then the HOME environment variables. Failing that, it uses getpwuid() on
+Unix-like systems (which returns the home dir given the current user in your
+system). On Windows, it then checks for the APPDATA variable, or as a last
+resort the '%USERPROFILE%\\Application Data'.
+
+2) On windows, if there is no _curlrc file in the home dir, it checks for one
+in the same dir the curl executable is placed. On Unix-like systems, it will
+simply try to load .curlrc from the determined home dir.
+
+.nf
+# --- Example file ---
+# this is a comment
+url = "example.com"
+output = "curlhere.html"
+user-agent = "superagent/1.0"
+
+# and fetch another URL too
+url = "example.com/docs/manpage.html"
+-O
+referer = "http://nowhereatall.example.com/"
+# --- End of example file ---
+.fi
+
+This option can be used multiple times to load multiple config files.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/connect-timeout.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/connect-timeout.d
new file mode 100644
index 0000000..3a32d86
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/connect-timeout.d
@@ -0,0 +1,11 @@
+Long: connect-timeout
+Arg: <seconds>
+Help: Maximum time allowed for connection
+See-also: max-time
+---
+Maximum time in seconds that you allow curl's connection to take.  This only
+limits the connection phase, so if curl connects within the given period it
+will continue - if not it will exit.  Since version 7.32.0, this option
+accepts decimal values.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/connect-to.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/connect-to.d
new file mode 100644
index 0000000..3fa0568
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/connect-to.d
@@ -0,0 +1,18 @@
+Long: connect-to
+Arg: <HOST1:PORT1:HOST2:PORT2>
+Help: Connect to host
+Added: 7.49.0
+See-also: resolve header
+---
+
+For a request to the given HOST:PORT pair, connect to
+CONNECT-TO-HOST:CONNECT-TO-PORT instead.  This option is suitable to direct
+requests at a specific server, e.g. at a specific cluster node in a cluster of
+servers.  This option is only used to establish the network connection. It
+does NOT affect the hostname/port that is used for TLS/SSL (e.g. SNI,
+certificate verification) or for the application protocols.  "host" and "port"
+may be the empty string, meaning "any host/port".  "connect-to-host" and
+"connect-to-port" may also be the empty string, meaning "use the request's
+original host/port".
+
+This option can be used many times to add many connect rules.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/continue-at.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/continue-at.d
new file mode 100644
index 0000000..733f494
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/continue-at.d
@@ -0,0 +1,15 @@
+Short: C
+Long: continue-at
+Arg: <offset>
+Help: Resumed transfer offset
+See-also: range
+---
+Continue/Resume a previous file transfer at the given offset. The given offset
+is the exact number of bytes that will be skipped, counting from the beginning
+of the source file before it is transferred to the destination.  If used with
+uploads, the FTP server command SIZE will not be used by curl.
+
+Use "-C -" to tell curl to automatically find out where/how to resume the
+transfer. It then uses the given output/input files to figure that out.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cookie-jar.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cookie-jar.d
new file mode 100644
index 0000000..da79777
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cookie-jar.d
@@ -0,0 +1,24 @@
+Short: c
+Long: cookie-jar
+Arg: <filename>
+Protocols: HTTP
+Help: Write cookies to <filename> after operation
+---
+Specify to which file you want curl to write all cookies after a completed
+operation. Curl writes all cookies from its in-memory cookie storage to the
+given file at the end of operations. If no cookies are known, no data will be
+written. The file will be written using the Netscape cookie file format. If
+you set the file name to a single dash, "-", the cookies will be written to
+stdout.
+
+This command line option will activate the cookie engine that makes curl
+record and use cookies. Another way to activate it is to use the --cookie
+option.
+
+If the cookie jar can't be created or written to, the whole curl operation
+won't fail or even report an error clearly. Using --verbose will get a warning
+displayed, but that is the only visible feedback you get about this possibly
+lethal situation.
+
+If this option is used several times, the last specified file name will be
+used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cookie.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cookie.d
new file mode 100644
index 0000000..383adda
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/cookie.d
@@ -0,0 +1,36 @@
+Short: b
+Long: cookie
+Arg: <data>
+Protocols: HTTP
+Help: Send cookies from string/file
+---
+Pass the data to the HTTP server in the Cookie header. It is supposedly
+the data previously received from the server in a "Set-Cookie:" line.  The
+data should be in the format "NAME1=VALUE1; NAME2=VALUE2".
+
+If no '=' symbol is used in the argument, it is instead treated as a filename
+to read previously stored cookie from. This option also activates the cookie
+engine which will make curl record incoming cookies, which may be handy if
+you're using this in combination with the --location option or do multiple URL
+transfers on the same invoke.
+
+The file format of the file to read cookies from should be plain HTTP headers
+(Set-Cookie style) or the Netscape/Mozilla cookie file format.
+
+The file specified with --cookie is only used as input. No cookies will be
+written to the file. To store cookies, use the --cookie-jar option.
+
+Exercise caution if you are using this option and multiple transfers may
+occur.  If you use the NAME1=VALUE1; format, or in a file use the Set-Cookie
+format and don't specify a domain, then the cookie is sent for any domain
+(even after redirects are followed) and cannot be modified by a server-set
+cookie. If the cookie engine is enabled and a server sets a cookie of the same
+name then both will be sent on a future transfer to that server, likely not
+what you intended.  To address these issues set a domain in Set-Cookie (doing
+that will include sub domains) or use the Netscape format.
+
+If this option is used several times, the last one will be used.
+
+Users very often want to both read cookies from a file and write updated
+cookies back to a file, so using both --cookie and --cookie-jar in the same
+command line is common.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/create-dirs.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/create-dirs.d
new file mode 100644
index 0000000..49e22e7
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/create-dirs.d
@@ -0,0 +1,9 @@
+Long: create-dirs
+Help: Create necessary local directory hierarchy
+---
+When used in conjunction with the --output option, curl will create the
+necessary local directory hierarchy as needed. This option creates the dirs
+mentioned with the --output option, nothing else. If the --output file name
+uses no dir or if the dirs it mentions already exist, no dir will be created.
+
+To create remote directories when using FTP or SFTP, try --ftp-create-dirs.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/crlf.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/crlf.d
new file mode 100644
index 0000000..f6694b6
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/crlf.d
@@ -0,0 +1,7 @@
+Long: crlf
+Help: Convert LF to CRLF in upload
+Protocols: FTP SMTP
+---
+Convert LF to CRLF in upload. Useful for MVS (OS/390).
+
+(SMTP added in 7.40.0)
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/crlfile.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/crlfile.d
new file mode 100644
index 0000000..0fcc63c
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/crlfile.d
@@ -0,0 +1,10 @@
+Long: crlfile
+Arg: <file>
+Protocols: TLS
+Help: Get a CRL list in PEM format from the given file
+Added: 7.19.7
+---
+Provide a file using PEM format with a Certificate Revocation List that may
+specify peer certificates that are to be considered revoked.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-ascii.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-ascii.d
new file mode 100644
index 0000000..bda4abc
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-ascii.d
@@ -0,0 +1,6 @@
+Long: data-ascii
+Arg: <data>
+Help: HTTP POST ASCII data
+Protocols: HTTP
+---
+This is just an alias for --data.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-binary.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-binary.d
new file mode 100644
index 0000000..c6721c6
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-binary.d
@@ -0,0 +1,13 @@
+Long: data-binary
+Arg: <data>
+Help: HTTP POST binary data
+Protocols: HTTP
+---
+This posts data exactly as specified with no extra processing whatsoever.
+
+If you start the data with the letter @, the rest should be a filename.  Data
+is posted in a similar manner as --data does, except that newlines and
+carriage returns are preserved and conversions are never done.
+
+If this option is used several times, the ones following the first will append
+data as described in --data.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-raw.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-raw.d
new file mode 100644
index 0000000..7669b4a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-raw.d
@@ -0,0 +1,9 @@
+Long: data-raw
+Arg: <data>
+Protocols: HTTP
+Help: HTTP POST data, '@' allowed
+Added: 7.43.0
+See-also: data
+---
+This posts data similarly to --data but without the special
+interpretation of the @ character.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-urlencode.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-urlencode.d
new file mode 100644
index 0000000..9873f33
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data-urlencode.d
@@ -0,0 +1,33 @@
+Long: data-urlencode
+Arg: <data>
+Help: HTTP POST data url encoded
+Protocols: HTTP
+See-also: data data-raw
+Added: 7.18.0
+---
+This posts data, similar to the other --data options with the exception
+that this performs URL-encoding.
+
+To be CGI-compliant, the <data> part should begin with a \fIname\fP followed
+by a separator and a content specification. The <data> part can be passed to
+curl using one of the following syntaxes:
+.RS
+.IP "content"
+This will make curl URL-encode the content and pass that on. Just be careful
+so that the content doesn't contain any = or @ symbols, as that will then make
+the syntax match one of the other cases below!
+.IP "=content"
+This will make curl URL-encode the content and pass that on. The preceding =
+symbol is not included in the data.
+.IP "name=content"
+This will make curl URL-encode the content part and pass that on. Note that
+the name part is expected to be URL-encoded already.
+.IP "@filename"
+This will make curl load data from the given file (including any newlines),
+URL-encode that data and pass it on in the POST.
+.IP "name@filename"
+This will make curl load data from the given file (including any newlines),
+URL-encode that data and pass it on in the POST. The name part gets an equal
+sign appended, resulting in \fIname=urlencoded-file-content\fP. Note that the
+name is expected to be URL-encoded already.
+.RE
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data.d
new file mode 100644
index 0000000..1572858
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/data.d
@@ -0,0 +1,30 @@
+Long: data
+Short: d
+Arg: <data>
+Help: HTTP POST data
+Protocols: HTTP
+See-also: data-binary data-urlencode data-raw
+Mutexed: form head upload
+---
+Sends the specified data in a POST request to the HTTP server, in the same way
+that a browser does when a user has filled in an HTML form and presses the
+submit button. This will cause curl to pass the data to the server using the
+content-type application/x-www-form-urlencoded.  Compare to --form.
+
+--data-raw is almost the same but does not have a special interpretation of
+the @ character. To post data purely binary, you should instead use the
+--data-binary option.  To URL-encode the value of a form field you may use
+--data-urlencode.
+
+If any of these options is used more than once on the same command line, the
+data pieces specified will be merged together with a separating
+&-symbol. Thus, using '-d name=daniel -d skill=lousy' would generate a post
+chunk that looks like \&'name=daniel&skill=lousy'.
+
+If you start the data with the letter @, the rest should be a file name to
+read the data from, or - if you want curl to read the data from
+stdin. Multiple files can also be specified. Posting data from a file named
+'foobar' would thus be done with --data @foobar. When --data is told to read
+from a file like that, carriage returns and newlines will be stripped out. If
+you don't want the @ character to have a special interpretation use --data-raw
+instead.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/delegation.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/delegation.d
new file mode 100644
index 0000000..138d823
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/delegation.d
@@ -0,0 +1,16 @@
+Long: delegation
+Arg: <LEVEL>
+Help: GSS-API delegation permission
+Protocols: GSS/kerberos
+---
+Set LEVEL to tell the server what it is allowed to delegate when it
+comes to user credentials.
+.RS
+.IP "none"
+Don't allow any delegation.
+.IP "policy"
+Delegates if and only if the OK-AS-DELEGATE flag is set in the Kerberos
+service ticket, which is a matter of realm policy.
+.IP "always"
+Unconditionally allow the server to delegate.
+.RE
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/digest.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/digest.d
new file mode 100644
index 0000000..5cdd925
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/digest.d
@@ -0,0 +1,11 @@
+Long: digest
+Help: Use HTTP Digest Authentication
+Protocols: HTTP
+Mutexed: basic ntlm negotiate
+See-also: user proxy-digest anyauth
+---
+Enables HTTP Digest authentication. This is an authentication scheme that
+prevents the password from being sent over the wire in clear text. Use this in
+combination with the normal --user option to set user name and password.
+
+If this option is used several times, only the first one is used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable-eprt.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable-eprt.d
new file mode 100644
index 0000000..a1e53c0
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable-eprt.d
@@ -0,0 +1,19 @@
+Long: disable-eprt
+Help: Inhibit using EPRT or LPRT
+Protocols: FTP
+---
+Tell curl to disable the use of the EPRT and LPRT commands when doing active
+FTP transfers. Curl will normally always first attempt to use EPRT, then LPRT
+before using PORT, but with this option, it will use PORT right away. EPRT and
+LPRT are extensions to the original FTP protocol, and may not work on all
+servers, but they enable more functionality in a better way than the
+traditional PORT command.
+
+--eprt can be used to explicitly enable EPRT again and --no-eprt is an alias
+for --disable-eprt.
+
+If the server is accessed using IPv6, this option will have no effect as EPRT
+is necessary then.
+
+Disabling EPRT only changes the active behavior. If you want to switch to
+passive mode you need to not use --ftp-port or force it with --ftp-pasv.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable-epsv.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable-epsv.d
new file mode 100644
index 0000000..6d2cb70
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable-epsv.d
@@ -0,0 +1,16 @@
+Long: disable-epsv
+Help: Inhibit using EPSV
+Protocols: FTP
+---
+(FTP) Tell curl to disable the use of the EPSV command when doing passive FTP
+transfers. Curl will normally always first attempt to use EPSV before PASV,
+but with this option, it will not try using EPSV.
+
+--epsv can be used to explicitly enable EPSV again and --no-epsv is an alias
+for --disable-epsv.
+
+If the server is an IPv6 host, this option will have no effect as EPSV is
+necessary then.
+
+Disabling EPSV only changes the passive behavior. If you want to switch to
+active mode you need to use --ftp-port.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable.d
new file mode 100644
index 0000000..20b27b4
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/disable.d
@@ -0,0 +1,7 @@
+Long: disable
+Short: q
+Help: Disable .curlrc
+---
+If used as the first parameter on the command line, the \fIcurlrc\fP config
+file will not be read and used. See the --config for details on the default
+config file search path.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-interface.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-interface.d
new file mode 100644
index 0000000..45e5af2
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-interface.d
@@ -0,0 +1,11 @@
+Long: dns-interface
+Arg: <interface>
+Help: Interface to use for DNS requests
+Protocols: DNS
+See-also: dns-ipv4-addr dns-ipv6-addr
+Added: 7.33.0
+Requires: c-ares
+---
+Tell curl to send outgoing DNS requests through <interface>. This option is a
+counterpart to --interface (which does not affect DNS). The supplied string
+must be an interface name (not an address).
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-ipv4-addr.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-ipv4-addr.d
new file mode 100644
index 0000000..597b858
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-ipv4-addr.d
@@ -0,0 +1,11 @@
+Long: dns-ipv4-addr
+Arg: <address>
+Help: IPv4 address to use for DNS requests
+Protocols: DNS
+See-also: dns-interface dns-ipv6-addr
+Added: 7.33.0
+Requires: c-ares
+---
+Tell curl to bind to <ip-address> when making IPv4 DNS requests, so that
+the DNS requests originate from this address. The argument should be a
+single IPv4 address.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-ipv6-addr.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-ipv6-addr.d
new file mode 100644
index 0000000..581f019
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-ipv6-addr.d
@@ -0,0 +1,11 @@
+Long: dns-ipv6-addr
+Arg: <address>
+Help: IPv6 address to use for DNS requests
+Protocols: DNS
+See-also: dns-interface dns-ipv4-addr
+Added: 7.33.0
+Requires: c-ares
+---
+Tell curl to bind to <ip-address> when making IPv6 DNS requests, so that
+the DNS requests originate from this address. The argument should be a
+single IPv6 address.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-servers.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-servers.d
new file mode 100644
index 0000000..a98fd07
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dns-servers.d
@@ -0,0 +1,10 @@
+Long: dns-servers
+Arg: <addresses>
+Help: DNS server addrs to use
+Requires: c-ares
+Added: 7.33.0
+---
+Set the list of DNS servers to be used instead of the system default.
+The list of IP addresses should be separated with commas. Port numbers
+may also optionally be given as \fI:<port-number>\fP after each IP
+address.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dump-header.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dump-header.d
new file mode 100644
index 0000000..05c10af
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/dump-header.d
@@ -0,0 +1,18 @@
+Long: dump-header
+Short: D
+Arg: <filename>
+Help: Write the received headers to <filename>
+Protocols: HTTP FTP
+See-also: output
+---
+Write the received protocol headers to the specified file.
+
+This option is handy to use when you want to store the headers that an HTTP
+site sends to you. Cookies from the headers could then be read in a second
+curl invocation by using the --cookie option! The --cookie-jar option is a
+better way to store cookies.
+
+When used in FTP, the FTP server response lines are considered being "headers"
+and thus are saved there.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/egd-file.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/egd-file.d
new file mode 100644
index 0000000..c22790f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/egd-file.d
@@ -0,0 +1,8 @@
+Long: egd-file
+Arg: <file>
+Help: EGD socket path for random data
+Protocols: TLS
+See-also: random-file
+---
+Specify the path name to the Entropy Gathering Daemon socket. The socket is
+used to seed the random engine for SSL connections.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/engine.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/engine.d
new file mode 100644
index 0000000..cde1a47
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/engine.d
@@ -0,0 +1,8 @@
+Long: engine
+Arg: <name>
+Help: Crypto engine to use
+Protocols: TLS
+---
+Select the OpenSSL crypto engine to use for cipher operations. Use --engine
+list to print a list of build-time supported engines. Note that not all (or
+none) of the engines may be available at run-time.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/expect100-timeout.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/expect100-timeout.d
new file mode 100644
index 0000000..c88f0b8
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/expect100-timeout.d
@@ -0,0 +1,11 @@
+Long: expect100-timeout
+Arg: <seconds>
+Help: How long to wait for 100-continue
+Protocols: HTTP
+Added: 7.47.0
+See-also: connect-timeout
+---
+Maximum time in seconds that you allow curl to wait for a 100-continue
+response when curl emits an Expects: 100-continue header in its request. By
+default curl will wait one second. This option accepts decimal values! When
+curl stops waiting, it will continue as if the response has been received.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/fail-early.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/fail-early.d
new file mode 100644
index 0000000..375d4c9
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/fail-early.d
@@ -0,0 +1,21 @@
+Long: fail-early
+Help: Fail on first transfer error, do not continue
+Added: 7.52.0
+---
+Fail and exit on the first detected transfer error.
+
+When curl is used to do multiple transfers on the command line, it will
+attempt to operate on each given URL, one by one. By default, it will ignore
+errors if there are more URLs given and the last URL's success will determine
+the error code curl returns. So early failures will be "hidden" by subsequent
+successful transfers.
+
+Using this option, curl will instead return an error on the first transfer
+that fails, independent of the amount of URLs that are given on the command
+line. This way, no transfer failures go undetected by scripts and similar.
+
+This option is global and does not need to be specified for each use of --next.
+
+This option does not imply --fail, which causes transfers to fail due to the
+server's HTTP status code. You can combine the two options, however note --fail
+is not global and is therefore contained by --next.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/fail.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/fail.d
new file mode 100644
index 0000000..c46c571
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/fail.d
@@ -0,0 +1,14 @@
+Long: fail
+Short: f
+Protocols: HTTP
+Help: Fail silently (no output at all) on HTTP errors
+---
+Fail silently (no output at all) on server errors. This is mostly done to
+better enable scripts etc to better deal with failed attempts. In normal cases
+when an HTTP server fails to deliver a document, it returns an HTML document
+stating so (which often also describes why and more). This flag will prevent
+curl from outputting that and return error 22.
+
+This method is not fail-safe and there are occasions where non-successful
+response codes will slip through, especially when authentication is involved
+(response codes 401 and 407).
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/false-start.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/false-start.d
new file mode 100644
index 0000000..65a8afb
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/false-start.d
@@ -0,0 +1,12 @@
+Long: false-start
+Help: Enable TLS False Start
+Protocols: TLS
+Added: 7.42.0
+---
+Tells curl to use false start during the TLS handshake. False start is a mode
+where a TLS client will start sending application data before verifying the
+server's Finished message, thus saving a round trip when performing a full
+handshake.
+
+This is currently only implemented in the NSS and Secure Transport (on iOS 7.0
+or later, or OS X 10.9 or later) backends.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/form-string.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/form-string.d
new file mode 100644
index 0000000..8079055
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/form-string.d
@@ -0,0 +1,11 @@
+Long: form-string
+Help: Specify HTTP multipart POST data
+Protocols: HTTP
+Arg: <name=string>
+See-also: form
+---
+Similar to --form except that the value string for the named parameter is used
+literally. Leading \&'@' and \&'<' characters, and the \&';type=' string in
+the value have no special meaning. Use this in preference to --form if
+there's any possibility that the string value may accidentally trigger the
+\&'@' or \&'<' features of --form.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/form.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/form.d
new file mode 100644
index 0000000..87a7d07
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/form.d
@@ -0,0 +1,54 @@
+Long: form
+Short: F
+Arg: <name=content>
+Help: Specify HTTP multipart POST data
+Protocols: HTTP
+Mutexed: data head upload
+---
+This lets curl emulate a filled-in form in which a user has pressed the submit
+button. This causes curl to POST data using the Content-Type
+multipart/form-data according to RFC 2388. This enables uploading of binary
+files etc. To force the 'content' part to be a file, prefix the file name with
+an @ sign. To just get the content part from a file, prefix the file name with
+the symbol <. The difference between @ and < is then that @ makes a file get
+attached in the post as a file upload, while the < makes a text field and just
+get the contents for that text field from a file.
+
+Example: to send an image to a server, where \&'profile' is the name of the
+form-field to which portrait.jpg will be the input:
+
+ curl -F profile=@portrait.jpg https://example.com/upload.cgi
+
+To read content from stdin instead of a file, use - as the filename. This goes
+for both @ and < constructs. Unfortunately it does not support reading the
+file from a named pipe or similar, as it needs the full size before the
+transfer starts.
+
+You can also tell curl what Content-Type to use by using 'type=', in a manner
+similar to:
+
+ curl -F "web=@index.html;type=text/html" example.com
+
+or
+
+ curl -F "name=daniel;type=text/foo" example.com
+
+You can also explicitly change the name field of a file upload part by setting
+filename=, like this:
+
+ curl -F "file=@localfile;filename=nameinpost" example.com
+
+If filename/path contains ',' or ';', it must be quoted by double-quotes like:
+
+ curl -F "file=@\\"localfile\\";filename=\\"nameinpost\\"" example.com
+
+or
+
+ curl -F 'file=@"localfile";filename="nameinpost"' example.com
+
+Note that if a filename/path is quoted by double-quotes, any double-quote
+or backslash within the filename must be escaped by backslash.
+
+See further examples and details in the MANUAL.
+
+This option can be used multiple times.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-account.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-account.d
new file mode 100644
index 0000000..013c4f3
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-account.d
@@ -0,0 +1,10 @@
+Long: ftp-account
+Arg: <data>
+Help: Account data string
+Protocols: FTP
+Added: 7.13.0
+---
+When an FTP server asks for "account data" after user name and password has
+been provided, this data is sent off using the ACCT command.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-alternative-to-user.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-alternative-to-user.d
new file mode 100644
index 0000000..8982ba8
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-alternative-to-user.d
@@ -0,0 +1,10 @@
+Long: ftp-alternative-to-user
+Arg: <command>
+Help: String to replace USER [name]
+Protocols: FTP
+Added: 7.15.5
+---
+If authenticating with the USER and PASS commands fails, send this command.
+When connecting to Tumbleweed's Secure Transport server over FTPS using a
+client certificate, using "SITE AUTH" will tell the server to retrieve the
+username from the certificate.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-create-dirs.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-create-dirs.d
new file mode 100644
index 0000000..ede5710
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-create-dirs.d
@@ -0,0 +1,8 @@
+Long: ftp-create-dirs
+Protocols: FTP SFTP
+Help: Create the remote dirs if not present
+See-also: create-dirs
+---
+When an FTP or SFTP URL/operation uses a path that doesn't currently exist on
+the server, the standard behavior of curl is to fail. Using this option, curl
+will instead attempt to create missing directories.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-method.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-method.d
new file mode 100644
index 0000000..95aa522
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-method.d
@@ -0,0 +1,21 @@
+Long: ftp-method
+Arg: <method>
+Help: Control CWD usage
+Protocols: FTP
+Added: 7.15.1
+---
+Control what method curl should use to reach a file on an FTP(S)
+server. The method argument should be one of the following alternatives:
+.RS
+.IP multicwd
+curl does a single CWD operation for each path part in the given URL. For deep
+hierarchies this means very many commands. This is how RFC 1738 says it should
+be done. This is the default but the slowest behavior.
+.IP nocwd
+curl does no CWD at all. curl will do SIZE, RETR, STOR etc and give a full
+path to the server for all these commands. This is the fastest behavior.
+.IP singlecwd
+curl does one CWD with the full target directory and then operates on the file
+\&"normally" (like in the multicwd case). This is somewhat more standards
+compliant than 'nocwd' but without the full penalty of 'multicwd'.
+.RE
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-pasv.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-pasv.d
new file mode 100644
index 0000000..44103e2
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-pasv.d
@@ -0,0 +1,16 @@
+Long: ftp-pasv
+Help: Use PASV/EPSV instead of PORT
+Protocols: FTP
+Added: 7.11.0
+See-also: disable-epsv
+---
+Use passive mode for the data connection. Passive is the internal default
+behavior, but using this option can be used to override a previous --ftp-port
+option.
+
+If this option is used several times, only the first one is used. Undoing an
+enforced passive really isn't doable but you must then instead enforce the
+correct --ftp-port again.
+
+Passive mode means that curl will try the EPSV command first and then PASV,
+unless --disable-epsv is used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-port.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-port.d
new file mode 100644
index 0000000..a852e90
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-port.d
@@ -0,0 +1,32 @@
+Long: ftp-port
+Arg: <address>
+Help: Use PORT instead of PASV
+Short: P
+Protocols: FTP
+See-also: ftp-pasv disable-eprt
+---
+Reverses the default initiator/listener roles when connecting with FTP. This
+option makes curl use active mode. curl then tells the server to connect back
+to the client's specified address and port, while passive mode asks the server
+to setup an IP address and port for it to connect to. <address> should be one
+of:
+.RS
+.IP interface
+i.e "eth0" to specify which interface's IP address you want to use (Unix only)
+.IP "IP address"
+i.e "192.168.10.1" to specify the exact IP address
+.IP "host name"
+i.e "my.host.domain" to specify the machine
+.IP "-"
+make curl pick the same IP address that is already used for the control
+connection
+.RE
+
+If this option is used several times, the last one will be used. Disable the
+use of PORT with --ftp-pasv. Disable the attempt to use the EPRT command
+instead of PORT by using --disable-eprt. EPRT is really PORT++.
+
+Since 7.19.5, you can append \&":[start]-[end]\&" to the right of the address,
+to tell curl what TCP port range to use. That means you specify a port range,
+from a lower to a higher number. A single number works as well, but do note
+that it increases the risk of failure since the port may not be available.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-pret.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-pret.d
new file mode 100644
index 0000000..dac4c35
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-pret.d
@@ -0,0 +1,8 @@
+Long: ftp-pret
+Help: Send PRET before PASV
+Protocols: FTP
+Added: 7.20.0
+---
+Tell curl to send a PRET command before PASV (and EPSV). Certain FTP servers,
+mainly drftpd, require this non-standard command for directory listings as
+well as up and downloads in PASV mode.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-skip-pasv-ip.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-skip-pasv-ip.d
new file mode 100644
index 0000000..da6ab11
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-skip-pasv-ip.d
@@ -0,0 +1,12 @@
+Long: ftp-skip-pasv-ip
+Help: Skip the IP address for PASV
+Protocols: FTP
+Added: 7.14.2
+See-also: ftp-pasv
+---
+Tell curl to not use the IP address the server suggests in its response
+to curl's PASV command when curl connects the data connection. Instead curl
+will re-use the same IP address it already uses for the control
+connection.
+
+This option has no effect if PORT, EPRT or EPSV is used instead of PASV.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-ccc-mode.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-ccc-mode.d
new file mode 100644
index 0000000..be10294
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-ccc-mode.d
@@ -0,0 +1,11 @@
+Long: ftp-ssl-ccc-mode
+Arg: <active/passive>
+Help: Set CCC mode
+Protocols: FTP
+Added: 7.16.2
+See-also: ftp-ssl-ccc
+---
+Sets the CCC mode. The passive mode will not initiate the shutdown, but
+instead wait for the server to do it, and will not reply to the shutdown from
+the server. The active mode initiates the shutdown and waits for a reply from
+the server.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-ccc.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-ccc.d
new file mode 100644
index 0000000..c6edc5b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-ccc.d
@@ -0,0 +1,10 @@
+Long: ftp-ssl-ccc
+Help: Send CCC after authenticating
+Protocols: FTP
+See-also: ssl ftp-ssl-ccc-mode
+Added: 7.16.1
+---
+Use CCC (Clear Command Channel) Shuts down the SSL/TLS layer after
+authenticating. The rest of the control channel communication will be
+unencrypted. This allows NAT routers to follow the FTP transaction. The
+default mode is passive.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-control.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-control.d
new file mode 100644
index 0000000..87a8225
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ftp-ssl-control.d
@@ -0,0 +1,8 @@
+Long: ftp-ssl-control
+Help: Require SSL/TLS for FTP login, clear for transfer
+Protocols: FTP
+Added: 7.16.0
+---
+Require SSL/TLS for the FTP login, clear for transfer.  Allows secure
+authentication, but non-encrypted data transfers for efficiency.  Fails the
+transfer if the server doesn't support SSL/TLS.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/gen.pl b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/gen.pl
new file mode 100755
index 0000000..73ea6d4
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/gen.pl
@@ -0,0 +1,385 @@
+#!/usr/bin/perl
+
+=begin comment
+
+This script generates the manpage.
+
+Example: gen.pl mainpage > curl.1
+
+Dev notes:
+
+We open *input* files in :crlf translation (a no-op on many platforms) in
+case we have CRLF line endings in Windows but a perl that defaults to LF.
+Unfortunately it seems some perls like msysgit can't handle a global input-only
+:crlf so it has to be specified on each file open for text input.
+
+=end comment
+=cut
+
+my $some_dir=$ARGV[1] || ".";
+
+opendir(my $dh, $some_dir) || die "Can't opendir $some_dir: $!";
+my @s = grep { /\.d$/ && -f "$some_dir/$_" } readdir($dh);
+closedir $dh;
+
+my %optshort;
+my %optlong;
+my %helplong;
+my %arglong;
+my %redirlong;
+my %protolong;
+
+# get the long name version, return the man page string
+sub manpageify {
+    my ($k)=@_;
+    my $l;
+    if($optlong{$k} ne "") {
+        # both short + long
+        $l = "\\fI-".$optlong{$k}.", --$k\\fP";
+    }
+    else {
+        # only long
+        $l = "\\fI--$k\\fP";
+    }
+    return $l;
+}
+
+sub printdesc {
+    my @desc = @_;
+    for my $d (@desc) {
+        # skip lines starting with space (examples)
+        if($d =~ /^[^ ]/) {
+            for my $k (keys %optlong) {
+                my $l = manpageify($k);
+                $d =~ s/--$k([^a-z0-9_-])/$l$1/;
+            }
+        }
+        print $d;
+    }
+}
+
+sub seealso {
+    my($standalone, $data)=@_;
+    if($standalone) {
+        return sprintf
+            ".SH \"SEE ALSO\"\n$data\n";
+    }
+    else {
+        return "See also $data. ";
+    }
+}
+
+sub overrides {
+    my ($standalone, $data)=@_;
+    if($standalone) {
+        return ".SH \"OVERRIDES\"\n$data\n";
+    }
+    else {
+        return $data;
+    }
+}
+
+sub protocols {
+    my ($standalone, $data)=@_;
+    if($standalone) {
+        return ".SH \"PROTOCOLS\"\n$data\n";
+    }
+    else {
+        return "($data) ";
+    }
+}
+
+sub added {
+    my ($standalone, $data)=@_;
+    if($standalone) {
+        return ".SH \"ADDED\"\nAdded in curl version $data\n";
+    }
+    else {
+        return "Added in $data. ";
+    }
+}
+
+sub single {
+    my ($f, $standalone)=@_;
+    open(F, "<:crlf", "$some_dir/$f") ||
+        return 1;
+    my $short;
+    my $long;
+    my $tags;
+    my $added;
+    my $protocols;
+    my $arg;
+    my $mutexed;
+    my $requires;
+    my $seealso;
+    my $magic; # cmdline special option
+    while(<F>) {
+        if(/^Short: *(.)/i) {
+            $short=$1;
+        }
+        elsif(/^Long: *(.*)/i) {
+            $long=$1;
+        }
+        elsif(/^Added: *(.*)/i) {
+            $added=$1;
+        }
+        elsif(/^Tags: *(.*)/i) {
+            $tags=$1;
+        }
+        elsif(/^Arg: *(.*)/i) {
+            $arg=$1;
+        }
+        elsif(/^Magic: *(.*)/i) {
+            $magic=$1;
+        }
+        elsif(/^Mutexed: *(.*)/i) {
+            $mutexed=$1;
+        }
+        elsif(/^Protocols: *(.*)/i) {
+            $protocols=$1;
+        }
+        elsif(/^See-also: *(.*)/i) {
+            $seealso=$1;
+        }
+        elsif(/^Requires: *(.*)/i) {
+            $requires=$1;
+        }
+        elsif(/^Help: *(.*)/i) {
+            ;
+        }
+        elsif(/^---/) {
+            if(!$long) {
+                print STDERR "WARN: no 'Long:' in $f\n";
+            }
+            last;
+        }
+        else {
+            chomp;
+            print STDERR "WARN: unrecognized line in $f, ignoring:\n:'$_';"
+        }
+    }
+    my @dest;
+    while(<F>) {
+        push @desc, $_;
+    }
+    close(F);
+    my $opt;
+    if(defined($short) && $long) {
+        $opt = "-$short, --$long";
+    }
+    elsif($short && !$long) {
+        $opt = "-$short";
+    }
+    elsif($long && !$short) {
+        $opt = "--$long";
+    }
+
+    if($arg) {
+        $opt .= " $arg";
+    }
+
+    if($standalone) {
+        print ".TH curl 1 \"30 Nov 2016\" \"curl 7.52.0\" \"curl manual\"\n";
+        print ".SH OPTION\n";
+        print "curl $opt\n";
+    }
+    else {
+        print ".IP \"$opt\"\n";
+    }
+    if($protocols) {
+        print protocols($standalone, $protocols);
+    }
+
+    if($standalone) {
+        print ".SH DESCRIPTION\n";
+    }
+
+    printdesc(@desc);
+    undef @desc;
+
+    my @foot;
+    if($seealso) {
+        my @m=split(/ /, $seealso);
+        my $mstr;
+        for my $k (@m) {
+            my $l = manpageify($k);
+            $mstr .= sprintf "%s$l", $mstr?" and ":"";
+        }
+        push @foot, seealso($standalone, $mstr);
+    }
+    if($requires) {
+        my $l = manpageify($long);
+        push @foot, "$l requires that the underlying libcurl".
+            " was built to support $requires. ";
+    }
+    if($mutexed) {
+        my @m=split(/ /, $mutexed);
+        my $mstr;
+        for my $k (@m) {
+            my $l = manpageify($k);
+            $mstr .= sprintf "%s$l", $mstr?" and ":"";
+        }
+        push @foot, overrides($standalone, "This option overrides $mstr. ");
+    }
+    if($added) {
+        push @foot, added($standalone, $added);
+    }
+    if($foot[0]) {
+        print "\n";
+        my $f = join("", @foot);
+        $f =~ s/ +\z//; # remove trailing space
+        print "$f\n";
+    }
+    return 0;
+}
+
+sub getshortlong {
+    my ($f)=@_;
+    open(F, "<:crlf", "$some_dir/$f");
+    my $short;
+    my $long;
+    my $help;
+    my $arg;
+    my $protocols;
+    while(<F>) {
+        if(/^Short: (.)/i) {
+            $short=$1;
+        }
+        elsif(/^Long: (.*)/i) {
+            $long=$1;
+        }
+        elsif(/^Help: (.*)/i) {
+            $help=$1;
+        }
+        elsif(/^Arg: (.*)/i) {
+            $arg=$1;
+        }
+        elsif(/^Protocols: (.*)/i) {
+            $protocols=$1;
+        }
+        elsif(/^---/) {
+            last;
+        }
+    }
+    close(F);
+    if($short) {
+        $optshort{$short}=$long;
+    }
+    if($long) {
+        $optlong{$long}=$short;
+        $helplong{$long}=$help;
+        $arglong{$long}=$arg;
+        $protolong{$long}=$protocols;
+    }
+}
+
+sub indexoptions {
+  foreach my $f (@s) {
+    getshortlong($f);
+  }
+}
+
+sub header {
+    my ($f)=@_;
+    open(F, "<:crlf", "$some_dir/$f");
+    my @d;
+    while(<F>) {
+        push @d, $_;
+    }
+    close(F);
+    printdesc(@d);
+}
+
+sub listhelp {
+    foreach my $f (sort keys %helplong) {
+        my $long = $f;
+        my $short = $optlong{$long};
+        my $opt;
+
+        if(defined($short) && $long) {
+            $opt = "-$short, --$long";
+        }
+        elsif($long && !$short) {
+            $opt = "    --$long";
+        }
+
+        my $arg = $arglong{$long};
+        if($arg) {
+            $opt .= " $arg";
+        }
+        my $desc = $helplong{$f};
+        $desc =~ s/\"/\\\"/g; # escape double quotes
+
+        my $line = sprintf "  {\"%s\",\n   \"%s\"},\n", $opt, $desc;
+
+        if(length($opt) + length($desc) > 78) {
+            print STDERR "WARN: the --$long line is too long\n";
+        }
+        print $line;
+    }
+}
+
+sub mainpage {
+    # show the page header
+    header("page-header");
+
+    # output docs for all options
+    foreach my $f (sort @s) {
+        single($f, 0);
+    }
+
+    header("page-footer");
+}
+
+sub showonly {
+    my ($f) = @_;
+    if(single($f, 1)) {
+        print STDERR "$f: failed\n";
+    }
+}
+
+sub showprotocols {
+    my %prots;
+    foreach my $f (keys %optlong) {
+        my @p = split(/ /, $protolong{$f});
+        for my $p (@p) {
+            $prots{$p}++;
+        }
+    }
+    for(sort keys %prots) {
+        printf "$_ (%d options)\n", $prots{$_};
+    }
+}
+
+sub getargs {
+    my $f;
+    do {
+        $f = shift @ARGV;
+        if($f eq "mainpage") {
+            mainpage();
+            return;
+        }
+        elsif($f eq "listhelp") {
+            listhelp();
+            return;
+        }
+        elsif($f eq "single") {
+            showonly(shift @ARGV);
+            return;
+        }
+        elsif($f eq "protos") {
+            showprotocols();
+            return;
+        }
+    } while($f);
+
+    print "Usage: gen.pl <mainpage/listhelp/single FILE/protos> [srcdir]\n";
+}
+
+#------------------------------------------------------------------------
+
+# learn all existing options
+indexoptions();
+
+getargs();
+
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/get.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/get.d
new file mode 100644
index 0000000..be7cb25
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/get.d
@@ -0,0 +1,15 @@
+Long: get
+Short: G
+Help: Put the post data in the URL and use GET
+---
+When used, this option will make all data specified with --data, --data-binary
+or --data-urlencode to be used in an HTTP GET request instead of the POST
+request that otherwise would be used. The data will be appended to the URL
+with a '?' separator.
+
+If used in combination with --head, the POST data will instead be appended to
+the URL with a HEAD request.
+
+If this option is used several times, only the first one is used. This is
+because undoing a GET doesn't make sense, but you should then instead enforce
+the alternative method you prefer.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/globoff.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/globoff.d
new file mode 100644
index 0000000..fff6516
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/globoff.d
@@ -0,0 +1,8 @@
+Long: globoff
+Short: g
+Help: Disable URL sequences and ranges using {} and []
+---
+This option switches off the "URL globbing parser". When you set this option,
+you can specify URLs that contain the letters {}[] without having them being
+interpreted by curl itself. Note that these letters are not normal legal URL
+contents but they should be encoded according to the URI standard.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/head.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/head.d
new file mode 100644
index 0000000..350a100
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/head.d
@@ -0,0 +1,8 @@
+Long: head
+Short: I
+Help: Show document info only
+Protocols: HTTP FTP FILE
+---
+Fetch the headers only! HTTP-servers feature the command HEAD which this uses
+to get nothing but the header of a document. When used on an FTP or FILE file,
+curl displays the file size and last modification time only.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/header.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/header.d
new file mode 100644
index 0000000..90af735
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/header.d
@@ -0,0 +1,38 @@
+Long: header
+Short: H
+Arg: <header>
+Help: Pass custom header LINE to server
+Protocols: HTTP
+---
+
+Extra header to include in the request when sending HTTP to a server. You may
+specify any number of extra headers. Note that if you should add a custom
+header that has the same name as one of the internal ones curl would use, your
+externally set header will be used instead of the internal one. This allows
+you to make even trickier stuff than curl would normally do. You should not
+replace internally set headers without knowing perfectly well what you're
+doing. Remove an internal header by giving a replacement without content on
+the right side of the colon, as in: -H \&"Host:". If you send the custom
+header with no-value then its header must be terminated with a semicolon, such
+as \-H \&"X-Custom-Header;" to send "X-Custom-Header:".
+
+curl will make sure that each header you add/replace is sent with the proper
+end-of-line marker, you should thus \fBnot\fP add that as a part of the header
+content: do not add newlines or carriage returns, they will only mess things up
+for you.
+
+See also the --user-agent and --referer options.
+
+Starting in 7.37.0, you need --proxy-header to send custom headers intended
+for a proxy.
+
+Example:
+
+ curl -H "X-First-Name: Joe" http://example.com/
+
+\fBWARNING\fP: headers set with this option will be set in all requests - even
+after redirects are followed, like when told with --location. This can lead to
+the header being sent to other hosts than the original host, so sensitive
+headers should be used with caution combined with following redirects.
+
+This option can be used multiple times to add/replace/remove multiple headers.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/help.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/help.d
new file mode 100644
index 0000000..64aa696
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/help.d
@@ -0,0 +1,6 @@
+Long: help
+Short: h
+Help: This help text
+---
+Usage help. This lists all current command line options with a short
+description.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/hostpubmd5.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/hostpubmd5.d
new file mode 100644
index 0000000..a851158
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/hostpubmd5.d
@@ -0,0 +1,9 @@
+Long: hostpubmd5
+Arg: <md5>
+Help: Acceptable MD5 hash of the host public key
+Protocols: SFTP SCP
+Added: 7.17.1
+---
+Pass a string containing 32 hexadecimal digits. The string should
+be the 128 bit MD5 checksum of the remote host's public key, curl will refuse
+the connection with the host unless the md5sums match.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http1.0.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http1.0.d
new file mode 100644
index 0000000..d9bbd76
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http1.0.d
@@ -0,0 +1,10 @@
+Short: 0
+Long: http1.0
+Tags: Versions
+Protocols: HTTP
+Added:
+Mutexed: http1.1 http2
+Help: Use HTTP 1.0
+---
+Tells curl to use HTTP version 1.0 instead of using its internally preferred
+HTTP version.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http1.1.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http1.1.d
new file mode 100644
index 0000000..f1e6b5c
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http1.1.d
@@ -0,0 +1,8 @@
+Long: http1.1
+Tags: Versions
+Protocols: HTTP
+Added: 7.33.0
+Mutexed: http1.0 http2
+Help: Use HTTP 1.1
+---
+Tells curl to use HTTP version 1.1.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http2-prior-knowledge.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http2-prior-knowledge.d
new file mode 100644
index 0000000..f793f77
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http2-prior-knowledge.d
@@ -0,0 +1,12 @@
+Long: http2-prior-knowledge
+Tags: Versions
+Protocols: HTTP
+Added: 7.49.0
+Mutexed: http1.1 http1.0 http2
+Requires: HTTP/2
+Help: Use HTTP 2 without HTTP/1.1 Upgrade
+---
+Tells curl to issue its non-TLS HTTP requests using HTTP/2 without HTTP/1.1
+Upgrade. It requires prior knowledge that the server supports HTTP/2 straight
+away. HTTPS requests will still do HTTP/2 the standard way with negotiated
+protocol version in the TLS handshake.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http2.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http2.d
new file mode 100644
index 0000000..04cff00
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/http2.d
@@ -0,0 +1,10 @@
+Long: http2
+Tags: Versions
+Protocols: HTTP
+Added: 7.33.0
+Mutexed: http1.1 http1.0 http2-prior-knowledge
+Requires: HTTP/2
+See-also: no-alpn
+Help: Use HTTP 2
+---
+Tells curl to use HTTP version 2.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ignore-content-length.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ignore-content-length.d
new file mode 100644
index 0000000..53524f5
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ignore-content-length.d
@@ -0,0 +1,10 @@
+Long: ignore-content-length
+Help: Ignore the size of the remote resource
+Protocols: FTP HTTP
+---
+For HTTP, Ignore the Content-Length header. This is particularly useful for
+servers running Apache 1.x, which will report incorrect Content-Length for
+files larger than 2 gigabytes.
+
+For FTP (since 7.46.0), skip the RETR command to figure out the size before
+downloading a file.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/include.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/include.d
new file mode 100644
index 0000000..e55d516
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/include.d
@@ -0,0 +1,7 @@
+Long: include
+Short: i
+Help: Include protocol headers in the output
+See-also: verbose
+---
+Include the HTTP-header in the output. The HTTP-header includes things like
+server-name, date of the document, HTTP-version and more...
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/insecure.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/insecure.d
new file mode 100644
index 0000000..49b0a43
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/insecure.d
@@ -0,0 +1,16 @@
+Long: insecure
+Short: k
+Help: Allow insecure server connections when using SSL
+Protocols: TLS
+See-also: proxy-insecure cacert
+---
+
+By default, every SSL connection curl makes is verified to be secure. This
+option allows curl to proceed and operate even for server connections
+otherwise considered insecure.
+
+The server connection is verified by making sure the server's certificate
+contains the right name and verifies successfully using the cert store.
+
+See this online resource for further details:
+ https://curl.haxx.se/docs/sslcerts.html
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/interface.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/interface.d
new file mode 100644
index 0000000..da84cd2
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/interface.d
@@ -0,0 +1,12 @@
+Long: interface
+Arg: <name>
+Help: Use network INTERFACE (or address)
+See-also: dns-interface
+---
+
+Perform an operation using a specified interface. You can enter interface
+name, IP address or host name. An example could look like:
+
+ curl --interface eth0:1 https://www.example.com/
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ipv4.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ipv4.d
new file mode 100644
index 0000000..9c40c8c
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ipv4.d
@@ -0,0 +1,12 @@
+Short: 4
+Long: ipv4
+Tags: Versions
+Protocols:
+Added:
+Mutexed: ipv6
+Requires:
+See-also: http1.1 http2
+Help: Resolve names to IPv4 addresses
+---
+This option tells curl to resolve names to IPv4 addresses only, and not for
+example try IPv6.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ipv6.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ipv6.d
new file mode 100644
index 0000000..c2392e7
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ipv6.d
@@ -0,0 +1,12 @@
+Short: 6
+Long: ipv6
+Tags: Versions
+Protocols:
+Added:
+Mutexed: ipv6
+Requires:
+See-also: http1.1 http2
+Help: Resolve names to IPv6 addresses
+---
+This option tells curl to resolve names to IPv6 addresses only, and not for
+example try IPv4.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/junk-session-cookies.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/junk-session-cookies.d
new file mode 100644
index 0000000..40ccd9c
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/junk-session-cookies.d
@@ -0,0 +1,10 @@
+Long: junk-session-cookies
+Short: j
+Help: Ignore session cookies read from file
+Protocols: HTTP
+See-also: cookie cookie-jar
+---
+When curl is told to read cookies from a given file, this option will make it
+discard all "session cookies". This will basically have the same effect as if
+a new session is started. Typical browsers always discard session cookies when
+they're closed down.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/keepalive-time.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/keepalive-time.d
new file mode 100644
index 0000000..c816e13
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/keepalive-time.d
@@ -0,0 +1,13 @@
+Long: keepalive-time
+Arg: <seconds>
+Help: Interval time for keepalive probes
+Added: 7.18.0
+---
+This option sets the time a connection needs to remain idle before sending
+keepalive probes and the time between individual keepalive probes. It is
+currently effective on operating systems offering the TCP_KEEPIDLE and
+TCP_KEEPINTVL socket options (meaning Linux, recent AIX, HP-UX and more). This
+option has no effect if --no-keepalive is used.
+
+If this option is used several times, the last one will be used. If
+unspecified, the option defaults to 60 seconds.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/key-type.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/key-type.d
new file mode 100644
index 0000000..bf39bcd
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/key-type.d
@@ -0,0 +1,9 @@
+Long: key-type
+Arg: <type>
+Help: Private key file type (DER/PEM/ENG)
+Protocols: TLS
+---
+Private key file type. Specify which type your --key provided private key
+is. DER, PEM, and ENG are supported. If not specified, PEM is assumed.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/key.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/key.d
new file mode 100644
index 0000000..fbf583a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/key.d
@@ -0,0 +1,10 @@
+Long: key
+Arg: <key>
+Protocols: TLS SSH
+Help: Private key file name
+---
+Private key file name. Allows you to provide your private key in this separate
+file. For SSH, if not specified, curl tries the following candidates in order:
+'~/.ssh/id_rsa', '~/.ssh/id_dsa', './id_rsa', './id_dsa'.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/krb.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/krb.d
new file mode 100644
index 0000000..19547af
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/krb.d
@@ -0,0 +1,11 @@
+Long: krb
+Arg: <level>
+Help: Enable Kerberos with security <level>
+Protocols: FTP
+Requires: Kerberos
+---
+Enable Kerberos authentication and use. The level must be entered and should
+be one of 'clear', 'safe', 'confidential', or 'private'. Should you use a
+level that is not one of these, 'private' will instead be used.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/libcurl.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/libcurl.d
new file mode 100644
index 0000000..ef132fe
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/libcurl.d
@@ -0,0 +1,11 @@
+Long: libcurl
+Arg: <file>
+Help: Dump libcurl equivalent code of this command line
+Added: 7.16.1
+---
+Append this option to any ordinary curl command line, and you will get a
+libcurl-using C source code written to the file that does the equivalent
+of what your command-line operation does!
+
+If this option is used several times, the last given file name will be
+used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/limit-rate.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/limit-rate.d
new file mode 100644
index 0000000..8784a84
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/limit-rate.d
@@ -0,0 +1,18 @@
+Long: limit-rate
+Arg: <speed>
+Help: Limit transfer speed to RATE
+---
+Specify the maximum transfer rate you want curl to use - for both downloads
+and uploads. This feature is useful if you have a limited pipe and you'd like
+your transfer not to use your entire bandwidth. To make it slower than it
+otherwise would be.
+
+The given speed is measured in bytes/second, unless a suffix is appended.
+Appending 'k' or 'K' will count the number as kilobytes, 'm' or M' makes it
+megabytes, while 'g' or 'G' makes it gigabytes. Examples: 200K, 3m and 1G.
+
+If you also use the --speed-limit option, that option will take precedence and
+might cripple the rate-limiting slightly, to help keeping the speed-limit
+logic working.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/list-only.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/list-only.d
new file mode 100644
index 0000000..4c56304
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/list-only.d
@@ -0,0 +1,24 @@
+Long: list-only
+Short: l
+Protocols: FTP POP3
+Help: List only mode
+Added: 7.21.5
+---
+(FTP)
+When listing an FTP directory, this switch forces a name-only view. This is
+especially useful if the user wants to machine-parse the contents of an FTP
+directory since the normal directory view doesn't use a standard look or
+format. When used like this, the option causes a NLST command to be sent to
+the server instead of LIST.
+
+Note: Some FTP servers list only files in their response to NLST; they do not
+include sub-directories and symbolic links.
+
+(POP3)
+When retrieving a specific email from POP3, this switch forces a LIST command
+to be performed instead of RETR. This is particularly useful if the user wants
+to see if a specific message id exists on the server and what size it is.
+
+Note: When combined with --request, this option can be used to send an UIDL
+command instead, so the user may use the email's unique identifier rather than
+it's message id to make the request.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/local-port.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/local-port.d
new file mode 100644
index 0000000..d96b46e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/local-port.d
@@ -0,0 +1,9 @@
+Long: local-port
+Arg: <num/range>
+Help: Force use of RANGE for local port numbers
+Added: 7.15.2
+---
+Set a preferred single number or range (FROM-TO) of local port numbers to use
+for the connection(s).  Note that port numbers by nature are a scarce resource
+that will be busy at times so setting this range to something too narrow might
+cause unnecessary connection setup failures.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/location-trusted.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/location-trusted.d
new file mode 100644
index 0000000..995a871
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/location-trusted.d
@@ -0,0 +1,9 @@
+Long: location-trusted
+Help: Like --location, and send auth to other hosts
+Protocols: HTTP
+See-also: user
+---
+Like --location, but will allow sending the name + password to all hosts that
+the site may redirect to. This may or may not introduce a security breach if
+the site redirects you to a site to which you'll send your authentication info
+(which is plaintext in the case of HTTP Basic authentication).
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/location.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/location.d
new file mode 100644
index 0000000..7c70e69
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/location.d
@@ -0,0 +1,23 @@
+Long: location
+Short: L
+Help: Follow redirects
+Protocols: HTTP
+---
+If the server reports that the requested page has moved to a different
+location (indicated with a Location: header and a 3XX response code), this
+option will make curl redo the request on the new place. If used together with
+--include or --head, headers from all requested pages will be shown. When
+authentication is used, curl only sends its credentials to the initial
+host. If a redirect takes curl to a different host, it won't be able to
+intercept the user+password. See also --location-trusted on how to change
+this. You can limit the amount of redirects to follow by using the
+--max-redirs option.
+
+When curl follows a redirect and the request is not a plain GET (for example
+POST or PUT), it will do the following request with a GET if the HTTP response
+was 301, 302, or 303. If the response code was any other 3xx code, curl will
+re-send the following request using the same unmodified method.
+
+You can tell curl to not change the non-GET request method to GET after a 30x
+response by using the dedicated options for that: --post301, --post302 and
+--post303.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/login-options.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/login-options.d
new file mode 100644
index 0000000..8bad051
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/login-options.d
@@ -0,0 +1,14 @@
+Long: login-options
+Arg: <options>
+Protocols: IMAP POP3 SMTP
+Help: Server login options
+Added: 7.34.0
+---
+Specify the login options to use during server authentication.
+
+You can use the login options to specify protocol specific options that may
+be used during authentication. At present only IMAP, POP3 and SMTP support
+login options. For more information about the login options please see
+RFC 2384, RFC 5092 and IETF draft draft-earhart-url-smtp-00.txt
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-auth.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-auth.d
new file mode 100644
index 0000000..70cf0ed
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-auth.d
@@ -0,0 +1,10 @@
+Long: mail-auth
+Arg: <address>
+Protocols: SMTP
+Help: Originator address of the original email
+Added: 7.25.0
+See-also: mail-rcpt mail-from
+---
+Specify a single address. This will be used to specify the authentication
+address (identity) of a submitted message that is being relayed to another
+server.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-from.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-from.d
new file mode 100644
index 0000000..1d93234
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-from.d
@@ -0,0 +1,8 @@
+Long: mail-from
+Arg: <address>
+Help: Mail from this address
+Protocols: SMTP
+Added: 7.20.0
+See-also: mail-rcpt mail-auth
+---
+Specify a single address that the given mail should get sent from.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-rcpt.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-rcpt.d
new file mode 100644
index 0000000..d747cea
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/mail-rcpt.d
@@ -0,0 +1,19 @@
+Long: mail-rcpt
+Arg: <address>
+Help: Mail from this address
+Protocols: SMTP
+Added: 7.20.0
+---
+Specify a single address, user name or mailing list name. Repeat this
+option several times to send to multiple recipients.
+
+When performing a mail transfer, the recipient should specify a valid email
+address to send the mail to.
+
+When performing an address verification (VRFY command), the recipient should be
+specified as the user name or user name and domain (as per Section 3.5 of
+RFC5321). (Added in 7.34.0)
+
+When performing a mailing list expand (EXPN command), the recipient should be
+specified using the mailing list name, such as "Friends" or "London-Office".
+(Added in 7.34.0)
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/manual.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/manual.d
new file mode 100644
index 0000000..a9dbb0c
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/manual.d
@@ -0,0 +1,5 @@
+Long: manual
+Short: M
+Help: Display the full manual
+---
+Manual. Display the huge help text.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-filesize.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-filesize.d
new file mode 100644
index 0000000..e92ef58
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-filesize.d
@@ -0,0 +1,12 @@
+Long: max-filesize
+Arg: <bytes>
+Help: Maximum file size to download
+See-also: limit-rate
+---
+Specify the maximum size (in bytes) of a file to download. If the file
+requested is larger than this value, the transfer will not start and curl will
+return with exit code 63.
+
+\fBNOTE:\fP The file size is not always known prior to download, and for such
+files this option has no effect even if the file transfer ends up being larger
+than this given limit. This concerns both FTP and HTTP transfers.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-redirs.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-redirs.d
new file mode 100644
index 0000000..04b824b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-redirs.d
@@ -0,0 +1,11 @@
+Long: max-redirs
+Arg: <num>
+Help: Maximum number of redirects allowed
+Protocols: HTTP
+---
+Set maximum number of redirection-followings allowed. When --location is used,
+is used to prevent curl from following redirections \&"in absurdum". By
+default, the limit is set to 50 redirections. Set this option to -1 to make it
+unlimited.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-time.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-time.d
new file mode 100644
index 0000000..c22343d
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/max-time.d
@@ -0,0 +1,13 @@
+Long: max-time
+Short: m
+Arg: <time>
+Help: Maximum time allowed for the transfer
+See-also: connect-timeout
+---
+Maximum time in seconds that you allow the whole operation to take.  This is
+useful for preventing your batch jobs from hanging for hours due to slow
+networks or links going down.  Since 7.32.0, this option accepts decimal
+values, but the actual timeout will decrease in accuracy as the specified
+timeout increases in decimal precision.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/metalink.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/metalink.d
new file mode 100644
index 0000000..8047e9f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/metalink.d
@@ -0,0 +1,27 @@
+Long: metalink
+Help: Process given URLs as metalink XML file
+Added: 7.27.0
+Requires: metalink
+---
+This option can tell curl to parse and process a given URI as Metalink file
+(both version 3 and 4 (RFC 5854) are supported) and make use of the mirrors
+listed within for failover if there are errors (such as the file or server not
+being available). It will also verify the hash of the file after the download
+completes. The Metalink file itself is downloaded and processed in memory and
+not stored in the local file system.
+
+Example to use a remote Metalink file:
+
+ curl --metalink http://www.example.com/example.metalink
+
+To use a Metalink file in the local file system, use FILE protocol (file://):
+
+ curl --metalink file://example.metalink
+
+Please note that if FILE protocol is disabled, there is no way to use a local
+Metalink file at the time of this writing. Also note that if --metalink and
+--include are used together, --include will be ignored. This is because
+including headers in the response will break Metalink parser and if the
+headers are included in the file described in Metalink file, hash check will
+fail.
+
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/negotiate.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/negotiate.d
new file mode 100644
index 0000000..69a6b91
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/negotiate.d
@@ -0,0 +1,15 @@
+Long: negotiate
+Help: Use HTTP Negotiate (SPNEGO) authentication
+Protocols: HTTP
+See-also: basic ntlm anyauth proxy-negotiate
+---
+Enables Negotiate (SPNEGO) authentication.
+
+This option requires a library built with GSS-API or SSPI support. Use
+--version to see if your curl supports GSS-API/SSPI or SPNEGO.
+
+When using this option, you must also provide a fake --user option to activate
+the authentication code properly. Sending a '-u :' is enough as the user name
+and password from the --user option aren't actually used.
+
+If this option is used several times, only the first one is used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc-file.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc-file.d
new file mode 100644
index 0000000..0b5d240
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc-file.d
@@ -0,0 +1,12 @@
+Long: netrc-file
+Help: Specify FILE for netrc
+Arg: <filename>
+Added: 7.21.5
+Mutexed: netrc
+---
+This option is similar to --netrc, except that you provide the path (absolute
+or relative) to the netrc file that Curl should use.  You can only specify one
+netrc file per invocation. If several --netrc-file options are provided,
+the last one will be used.
+
+It will abide by --netrc-optional if specified.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc-optional.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc-optional.d
new file mode 100644
index 0000000..c285403
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc-optional.d
@@ -0,0 +1,7 @@
+Long: netrc-optional
+Help: Use either .netrc or URL
+Mutexed: netrc
+See-also: netrc-file
+---
+Very similar to --netrc, but this option makes the .netrc usage \fBoptional\fP
+and not mandatory as the --netrc option does.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc.d
new file mode 100644
index 0000000..2df2678
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/netrc.d
@@ -0,0 +1,17 @@
+Long: netrc
+Short: n
+Help: Must read .netrc for user name and password
+---
+Makes curl scan the \fI.netrc\fP (\fI_netrc\fP on Windows) file in the user's
+home directory for login name and password. This is typically used for FTP on
+Unix. If used with HTTP, curl will enable user authentication. See
+\fInetrc(5)\fP \fIftp(1)\fP for details on the file format. Curl will not
+complain if that file doesn't have the right permissions (it should not be
+either world- or group-readable). The environment variable "HOME" is used to
+find the home directory.
+
+A quick and very simple example of how to setup a \fI.netrc\fP to allow curl
+to FTP to the machine host.domain.com with user name \&'myself' and password
+\&'secret' should look similar to:
+
+.B "machine host.domain.com login myself password secret"
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/next.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/next.d
new file mode 100644
index 0000000..1d1e70a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/next.d
@@ -0,0 +1,20 @@
+Short: :
+Long: next
+Tags:
+Protocols:
+Added: 7.36.0
+Magic: divider
+Help: Make next URL use its separate set of options
+---
+Tells curl to use a separate operation for the following URL and associated
+options. This allows you to send several URL requests, each with their own
+specific options, for example, such as different user names or custom requests
+for each.
+
+--next will reset all local options and only global ones will have their
+values survive over to the operation following the --next instruction. Global
+options include --verbose, --trace, --trace-ascii and --fail-early.
+
+For example, you can do both a GET and a POST in a single command line:
+
+ curl www1.example.com --next -d postthis www2.example.com
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-alpn.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-alpn.d
new file mode 100644
index 0000000..88abb83
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-alpn.d
@@ -0,0 +1,11 @@
+Long: no-alpn
+Tags: HTTP/2
+Protocols: HTTPS
+Added: 7.36.0
+See-also: no-npn http2
+Requires: TLS
+Help: Disable the ALPN TLS extension
+---
+Disable the ALPN TLS extension. ALPN is enabled by default if libcurl was built
+with an SSL library that supports ALPN. ALPN is used by a libcurl that supports
+HTTP/2 to negotiate HTTP/2 support with the server during https sessions.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-buffer.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-buffer.d
new file mode 100644
index 0000000..65a6282
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-buffer.d
@@ -0,0 +1,11 @@
+Long: no-buffer
+Short: N
+Help: Disable buffering of the output stream
+---
+Disables the buffering of the output stream. In normal work situations, curl
+will use a standard buffered output stream that will have the effect that it
+will output the data in chunks, not necessarily exactly when the data arrives.
+Using this option will disable that buffering.
+
+Note that this is the negated option name documented. You can thus use
+--buffer to enforce the buffering.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-keepalive.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-keepalive.d
new file mode 100644
index 0000000..8fb28a0
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-keepalive.d
@@ -0,0 +1,8 @@
+Long: no-keepalive
+Help: Disable TCP keepalive on the connection
+---
+Disables the use of keepalive messages on the TCP connection. curl otherwise
+enables them by default.
+
+Note that this is the negated option name documented. You can thus use
+--keepalive to enforce keepalive.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-npn.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-npn.d
new file mode 100644
index 0000000..ab0f6de
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-npn.d
@@ -0,0 +1,12 @@
+Long: no-npn
+Tags: Versions HTTP/2
+Protocols: HTTPS
+Added: 7.36.0
+Mutexed:
+See-also: no-alpn http2
+Requires: TLS
+Help: Disable the NPN TLS extension
+---
+Disable the NPN TLS extension. NPN is enabled by default if libcurl was built
+with an SSL library that supports NPN. NPN is used by a libcurl that supports
+HTTP/2 to negotiate HTTP/2 support with the server during https sessions.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-sessionid.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-sessionid.d
new file mode 100644
index 0000000..397a158
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/no-sessionid.d
@@ -0,0 +1,13 @@
+Long: no-sessionid
+Help: Disable SSL session-ID reusing
+Protocols: TLS
+Added: 7.16.0
+---
+Disable curl's use of SSL session-ID caching.  By default all transfers are
+done using the cache. Note that while nothing should ever get hurt by
+attempting to reuse SSL session-IDs, there seem to be broken SSL
+implementations in the wild that may require you to disable this in order for
+you to succeed.
+
+Note that this is the negated option name documented. You can thus use
+--sessionid to enforce session-ID caching.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/noproxy.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/noproxy.d
new file mode 100644
index 0000000..a216e75
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/noproxy.d
@@ -0,0 +1,15 @@
+Long: noproxy
+Arg: <no-proxy-list>
+Help: List of hosts which do not use proxy
+Added: 7.19.4
+---
+Comma-separated list of hosts which do not use a proxy, if one is specified.
+The only wildcard is a single * character, which matches all hosts, and
+effectively disables the proxy. Each name in this list is matched as either
+a domain which contains the hostname, or the hostname itself. For example,
+local.com would match local.com, local.com:80, and www.local.com, but not
+www.notlocal.com.
+
+Since 7.53.0, This option overrides the environment variables that disable the
+proxy. If there's an environment variable disabling a proxy, you can set
+noproxy list to \&"" to override it.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ntlm-wb.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ntlm-wb.d
new file mode 100644
index 0000000..7b93384
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ntlm-wb.d
@@ -0,0 +1,7 @@
+Long: ntlm-wb
+Help: Use HTTP NTLM authentication with winbind
+Protocols: HTTP
+See-also: ntlm proxy-ntlm
+---
+Enables NTLM much in the style --ntlm does, but hand over the authentication
+to the separate binary ntlmauth application that is executed when needed.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ntlm.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ntlm.d
new file mode 100644
index 0000000..d71cd43
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ntlm.d
@@ -0,0 +1,18 @@
+Long: ntlm
+Help: Use HTTP NTLM authentication
+Mutexed: basic negotiated digest anyauth
+See-also: proxy-ntlm
+Protocols: HTTP
+Requires: TLS
+---
+Enables NTLM authentication. The NTLM authentication method was designed by
+Microsoft and is used by IIS web servers. It is a proprietary protocol,
+reverse-engineered by clever people and implemented in curl based on their
+efforts. This kind of behavior should not be endorsed, you should encourage
+everyone who uses NTLM to switch to a public and documented authentication
+method instead, such as Digest.
+
+If you want to enable NTLM for your proxy authentication, then use
+--proxy-ntlm.
+
+If this option is used several times, only the first one is used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/oauth2-bearer.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/oauth2-bearer.d
new file mode 100644
index 0000000..7807167
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/oauth2-bearer.d
@@ -0,0 +1,12 @@
+Long: oauth2-bearer
+Help: OAuth 2 Bearer Token
+Arg: <token>
+Protocols: IMAP POP3 SMTP
+---
+Specify the Bearer Token for OAUTH 2.0 server authentication. The Bearer Token
+is used in conjunction with the user name which can be specified as part of
+the --url or --user options.
+
+The Bearer Token and user name are formatted according to RFC 6750.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/output.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/output.d
new file mode 100644
index 0000000..35f52a2
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/output.d
@@ -0,0 +1,32 @@
+Long: output
+Arg: <file>
+Short: o
+Help: Write to file instead of stdout
+See-also: remote-name remote-name-all remote-header-name
+---
+Write output to <file> instead of stdout. If you are using {} or [] to fetch
+multiple documents, you can use '#' followed by a number in the <file>
+specifier. That variable will be replaced with the current string for the URL
+being fetched. Like in:
+
+ curl http://{one,two}.example.com -o "file_#1.txt"
+
+or use several variables like:
+
+ curl http://{site,host}.host[1-5].com -o "#1_#2"
+
+You may use this option as many times as the number of URLs you have. For
+example, if you specify two URLs on the same command line, you can use it like
+this:
+
+  curl -o aa example.com -o bb example.net
+
+and the order of the -o options and the URLs doesn't matter, just that the
+first -o is for the first URL and so on, so the above command line can also be
+written as
+
+  curl example.com example.net -o aa -o bb
+
+See also the --create-dirs option to create the local directories
+dynamically. Specifying the output as '-' (a single dash) will force the
+output to be done to stdout.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/page-footer b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/page-footer
new file mode 100644
index 0000000..55aefb2
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/page-footer
@@ -0,0 +1,244 @@
+.SH FILES
+.I ~/.curlrc
+.RS
+Default config file, see --config for details.
+.SH ENVIRONMENT
+The environment variables can be specified in lower case or upper case. The
+lower case version has precedence. http_proxy is an exception as it is only
+available in lower case.
+
+Using an environment variable to set the proxy has the same effect as using
+the --proxy option.
+
+.IP "http_proxy [protocol://]<host>[:port]"
+Sets the proxy server to use for HTTP.
+.IP "HTTPS_PROXY [protocol://]<host>[:port]"
+Sets the proxy server to use for HTTPS.
+.IP "[url-protocol]_PROXY [protocol://]<host>[:port]"
+Sets the proxy server to use for [url-protocol], where the protocol is a
+protocol that curl supports and as specified in a URL. FTP, FTPS, POP3, IMAP,
+SMTP, LDAP etc.
+.IP "ALL_PROXY [protocol://]<host>[:port]"
+Sets the proxy server to use if no protocol-specific proxy is set.
+.IP "NO_PROXY <comma-separated list of hosts>"
+list of host names that shouldn't go through any proxy. If set to a asterisk
+\&'*' only, it matches all hosts.
+
+Since 7.53.0, this environment variable disable the proxy even if specify
+--proxy option. That is
+.B NO_PROXY=direct.example.com curl -x http://proxy.example.com
+.B http://direct.example.com
+accesses the target URL directly, and
+.B NO_PROXY=direct.example.com curl -x http://proxy.example.com
+.B http://somewhere.example.com
+accesses the target URL through proxy.
+
+.SH "PROXY PROTOCOL PREFIXES"
+Since curl version 7.21.7, the proxy string may be specified with a
+protocol:// prefix to specify alternative proxy protocols.
+
+If no protocol is specified in the proxy string or if the string doesn't match
+a supported one, the proxy will be treated as an HTTP proxy.
+
+The supported proxy protocol prefixes are as follows:
+.IP "socks4://"
+Makes it the equivalent of --socks4
+.IP "socks4a://"
+Makes it the equivalent of --socks4a
+.IP "socks5://"
+Makes it the equivalent of --socks5
+.IP "socks5h://"
+Makes it the equivalent of --socks5-hostname
+.SH EXIT CODES
+There are a bunch of different error codes and their corresponding error
+messages that may appear during bad conditions. At the time of this writing,
+the exit codes are:
+.IP 1
+Unsupported protocol. This build of curl has no support for this protocol.
+.IP 2
+Failed to initialize.
+.IP 3
+URL malformed. The syntax was not correct.
+.IP 4
+A feature or option that was needed to perform the desired request was not
+enabled or was explicitly disabled at build-time. To make curl able to do
+this, you probably need another build of libcurl!
+.IP 5
+Couldn't resolve proxy. The given proxy host could not be resolved.
+.IP 6
+Couldn't resolve host. The given remote host was not resolved.
+.IP 7
+Failed to connect to host.
+.IP 8
+Weird server reply. The server sent data curl couldn't parse.
+.IP 9
+FTP access denied. The server denied login or denied access to the particular
+resource or directory you wanted to reach. Most often you tried to change to a
+directory that doesn't exist on the server.
+.IP 10
+FTP accept failed. While waiting for the server to connect back when an active
+FTP session is used, an error code was sent over the control connection or
+similar.
+.IP 11
+FTP weird PASS reply. Curl couldn't parse the reply sent to the PASS request.
+.IP 12
+During an active FTP session while waiting for the server to connect back to
+curl, the timeout expired.
+.IP 13
+FTP weird PASV reply, Curl couldn't parse the reply sent to the PASV request.
+.IP 14
+FTP weird 227 format. Curl couldn't parse the 227-line the server sent.
+.IP 15
+FTP can't get host. Couldn't resolve the host IP we got in the 227-line.
+.IP 16
+HTTP/2 error. A problem was detected in the HTTP2 framing layer. This is
+somewhat generic and can be one out of several problems, see the error message
+for details.
+.IP 17
+FTP couldn't set binary. Couldn't change transfer method to binary.
+.IP 18
+Partial file. Only a part of the file was transferred.
+.IP 19
+FTP couldn't download/access the given file, the RETR (or similar) command
+failed.
+.IP 21
+FTP quote error. A quote command returned error from the server.
+.IP 22
+HTTP page not retrieved. The requested url was not found or returned another
+error with the HTTP error code being 400 or above. This return code only
+appears if --fail is used.
+.IP 23
+Write error. Curl couldn't write data to a local filesystem or similar.
+.IP 25
+FTP couldn't STOR file. The server denied the STOR operation, used for FTP
+uploading.
+.IP 26
+Read error. Various reading problems.
+.IP 27
+Out of memory. A memory allocation request failed.
+.IP 28
+Operation timeout. The specified time-out period was reached according to the
+conditions.
+.IP 30
+FTP PORT failed. The PORT command failed. Not all FTP servers support the PORT
+command, try doing a transfer using PASV instead!
+.IP 31
+FTP couldn't use REST. The REST command failed. This command is used for
+resumed FTP transfers.
+.IP 33
+HTTP range error. The range "command" didn't work.
+.IP 34
+HTTP post error. Internal post-request generation error.
+.IP 35
+SSL connect error. The SSL handshaking failed.
+.IP 36
+Bad download resume. Couldn't continue an earlier aborted download.
+.IP 37
+FILE couldn't read file. Failed to open the file. Permissions?
+.IP 38
+LDAP cannot bind. LDAP bind operation failed.
+.IP 39
+LDAP search failed.
+.IP 41
+Function not found. A required LDAP function was not found.
+.IP 42
+Aborted by callback. An application told curl to abort the operation.
+.IP 43
+Internal error. A function was called with a bad parameter.
+.IP 45
+Interface error. A specified outgoing interface could not be used.
+.IP 47
+Too many redirects. When following redirects, curl hit the maximum amount.
+.IP 48
+Unknown option specified to libcurl. This indicates that you passed a weird
+option to curl that was passed on to libcurl and rejected. Read up in the
+manual!
+.IP 49
+Malformed telnet option.
+.IP 51
+The peer's SSL certificate or SSH MD5 fingerprint was not OK.
+.IP 52
+The server didn't reply anything, which here is considered an error.
+.IP 53
+SSL crypto engine not found.
+.IP 54
+Cannot set SSL crypto engine as default.
+.IP 55
+Failed sending network data.
+.IP 56
+Failure in receiving network data.
+.IP 58
+Problem with the local certificate.
+.IP 59
+Couldn't use specified SSL cipher.
+.IP 60
+Peer certificate cannot be authenticated with known CA certificates.
+.IP 61
+Unrecognized transfer encoding.
+.IP 62
+Invalid LDAP URL.
+.IP 63
+Maximum file size exceeded.
+.IP 64
+Requested FTP SSL level failed.
+.IP 65
+Sending the data requires a rewind that failed.
+.IP 66
+Failed to initialise SSL Engine.
+.IP 67
+The user name, password, or similar was not accepted and curl failed to log in.
+.IP 68
+File not found on TFTP server.
+.IP 69
+Permission problem on TFTP server.
+.IP 70
+Out of disk space on TFTP server.
+.IP 71
+Illegal TFTP operation.
+.IP 72
+Unknown TFTP transfer ID.
+.IP 73
+File already exists (TFTP).
+.IP 74
+No such user (TFTP).
+.IP 75
+Character conversion failed.
+.IP 76
+Character conversion functions required.
+.IP 77
+Problem with reading the SSL CA cert (path? access rights?).
+.IP 78
+The resource referenced in the URL does not exist.
+.IP 79
+An unspecified error occurred during the SSH session.
+.IP 80
+Failed to shut down the SSL connection.
+.IP 82
+Could not load CRL file, missing or wrong format (added in 7.19.0).
+.IP 83
+Issuer check failed (added in 7.19.0).
+.IP 84
+The FTP PRET command failed
+.IP 85
+RTSP: mismatch of CSeq numbers
+.IP 86
+RTSP: mismatch of Session Identifiers
+.IP 87
+unable to parse FTP file list
+.IP 88
+FTP chunk callback reported error
+.IP 89
+No connection available, the session will be queued
+.IP 90
+SSL public key does not matched pinned public key
+.IP XX
+More error codes will appear here in future releases. The existing ones
+are meant to never change.
+.SH AUTHORS / CONTRIBUTORS
+Daniel Stenberg is the main author, but the whole list of contributors is
+found in the separate THANKS file.
+.SH WWW
+https://curl.haxx.se
+.SH "SEE ALSO"
+.BR ftp (1),
+.BR wget (1)
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/page-header b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/page-header
new file mode 100644
index 0000000..ee5af14
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/page-header
@@ -0,0 +1,141 @@
+.\" **************************************************************************
+.\" *                                  _   _ ____  _
+.\" *  Project                     ___| | | |  _ \| |
+.\" *                             / __| | | | |_) | |
+.\" *                            | (__| |_| |  _ <| |___
+.\" *                             \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.\" DO NOT EDIT. Generated by the curl project gen.pl man page generator.
+.\"
+.TH curl 1 "16 Dec 2016" "Curl 7.52.0" "Curl Manual"
+.SH NAME
+curl \- transfer a URL
+.SH SYNOPSIS
+.B curl [options]
+.I [URL...]
+.SH DESCRIPTION
+.B curl
+is a tool to transfer data from or to a server, using one of the supported
+protocols (DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP,
+LDAPS, POP3, POP3S, RTMP, RTSP, SCP, SFTP, SMB, SMBS, SMTP, SMTPS, TELNET
+and TFTP). The command is designed to work without user interaction.
+
+curl offers a busload of useful tricks like proxy support, user
+authentication, FTP upload, HTTP post, SSL connections, cookies, file transfer
+resume, Metalink, and more. As you will see below, the number of features will
+make your head spin!
+
+curl is powered by libcurl for all transfer-related features. See
+\fIlibcurl(3)\fP for details.
+.SH URL
+The URL syntax is protocol-dependent. You'll find a detailed description in
+RFC 3986.
+
+You can specify multiple URLs or parts of URLs by writing part sets within
+braces as in:
+
+  http://site.{one,two,three}.com
+
+or you can get sequences of alphanumeric series by using [] as in:
+
+  ftp://ftp.example.com/file[1-100].txt
+
+  ftp://ftp.example.com/file[001-100].txt    (with leading zeros)
+
+  ftp://ftp.example.com/file[a-z].txt
+
+Nested sequences are not supported, but you can use several ones next to each
+other:
+
+  http://example.com/archive[1996-1999]/vol[1-4]/part{a,b,c}.html
+
+You can specify any amount of URLs on the command line. They will be fetched
+in a sequential manner in the specified order.
+
+You can specify a step counter for the ranges to get every Nth number or
+letter:
+
+  http://example.com/file[1-100:10].txt
+
+  http://example.com/file[a-z:2].txt
+
+When using [] or {} sequences when invoked from a command line prompt, you
+probably have to put the full URL within double quotes to avoid the shell from
+interfering with it. This also goes for other characters treated special, like
+for example '&', '?' and '*'.
+
+Provide the IPv6 zone index in the URL with an escaped percentage sign and the
+interface name. Like in
+
+  http://[fe80::3%25eth0]/
+
+If you specify URL without protocol:// prefix, curl will attempt to guess what
+protocol you might want. It will then default to HTTP but try other protocols
+based on often-used host name prefixes. For example, for host names starting
+with "ftp." curl will assume you want to speak FTP.
+
+curl will do its best to use what you pass to it as a URL. It is not trying to
+validate it as a syntactically correct URL by any means but is instead
+\fBvery\fP liberal with what it accepts.
+
+curl will attempt to re-use connections for multiple file transfers, so that
+getting many files from the same server will not do multiple connects /
+handshakes. This improves speed. Of course this is only done on files
+specified on a single command line and cannot be used between separate curl
+invokes.
+.SH "PROGRESS METER"
+curl normally displays a progress meter during operations, indicating the
+amount of transferred data, transfer speeds and estimated time left, etc. The
+progress meter displays number of bytes and the speeds are in bytes per
+second. The suffixes (k, M, G, T, P) are 1024 based. For example 1k is 1024
+bytes. 1M is 1048576 bytes.
+
+curl displays this data to the terminal by default, so if you invoke curl to
+do an operation and it is about to write data to the terminal, it
+\fIdisables\fP the progress meter as otherwise it would mess up the output
+mixing progress meter and response data.
+
+If you want a progress meter for HTTP POST or PUT requests, you need to
+redirect the response output to a file, using shell redirect (>), --output or
+similar.
+
+It is not the same case for FTP upload as that operation does not spit out
+any response data to the terminal.
+
+If you prefer a progress "bar" instead of the regular meter, --progress-bar is
+your friend. You can also disable the progress meter completely with the
+--silent option.
+.SH OPTIONS
+Options start with one or two dashes. Many of the options require an
+additional value next to them.
+
+The short "single-dash" form of the options, -d for example, may be used with
+or without a space between it and its value, although a space is a recommended
+separator. The long "double-dash" form, --data for example, requires a space
+between it and its value.
+
+Short version options that don't need any additional values can be used
+immediately next to each other, like for example you can specify all the
+options -O, -L and -v at once as -OLv.
+
+In general, all boolean options are enabled with --\fBoption\fP and yet again
+disabled with --\fBno-\fPoption. That is, you use the exact same option name
+but prefix it with "no-". However, in this list we mostly only list and show
+the --option version of them. (This concept with --no options was added in
+7.19.0. Previously most options were toggled on/off on repeated use of the
+same command line option.)
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pass.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pass.d
new file mode 100644
index 0000000..2639cb9
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pass.d
@@ -0,0 +1,8 @@
+Long: pass
+Arg: <phrase>
+Help: Pass phrase for the private key
+Protocols: SSH TLS
+---
+Passphrase for the private key
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/path-as-is.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/path-as-is.d
new file mode 100644
index 0000000..946e2f0
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/path-as-is.d
@@ -0,0 +1,7 @@
+Long: path-as-is
+Help: Do not squash .. sequences in URL path
+Added: 7.42.0
+---
+Tell curl to not handle sequences of /../ or /./ in the given URL
+path. Normally curl will squash or merge them according to standards but with
+this option set you tell it not to do that.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pinnedpubkey.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pinnedpubkey.d
new file mode 100644
index 0000000..0657e6e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pinnedpubkey.d
@@ -0,0 +1,27 @@
+Long: pinnedpubkey
+Arg: <hashes>
+Help: FILE/HASHES Public key to verify peer against
+Protocols: TLS
+---
+Tells curl to use the specified public key file (or hashes) to verify the
+peer. This can be a path to a file which contains a single public key in PEM
+or DER format, or any number of base64 encoded sha256 hashes preceded by
+\'sha256//\' and separated by \';\'
+
+When negotiating a TLS or SSL connection, the server sends a certificate
+indicating its identity. A public key is extracted from this certificate and
+if it does not exactly match the public key provided to this option, curl will
+abort the connection before sending or receiving any data.
+
+PEM/DER support:
+  7.39.0: OpenSSL, GnuTLS and GSKit
+  7.43.0: NSS and wolfSSL/CyaSSL
+  7.47.0: mbedtls
+  7.49.0: PolarSSL
+sha256 support:
+  7.44.0: OpenSSL, GnuTLS, NSS and wolfSSL/CyaSSL.
+  7.47.0: mbedtls
+  7.49.0: PolarSSL
+Other SSL backends not supported.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post301.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post301.d
new file mode 100644
index 0000000..87a9fe7
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post301.d
@@ -0,0 +1,11 @@
+Long: post301
+Help: Do not switch to GET after following a 301
+Protocols: HTTP
+See-also: post302 post303 location
+Added: 7.17.1
+---
+Tells curl to respect RFC 7231/6.4.2 and not convert POST requests into GET
+requests when following a 301 redirection. The non-RFC behaviour is ubiquitous
+in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may require a POST to remain a POST after such
+a redirection. This option is meaningful only when using --location.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post302.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post302.d
new file mode 100644
index 0000000..caf0d87
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post302.d
@@ -0,0 +1,11 @@
+Long: post302
+Help: Do not switch to GET after following a 302
+Protocols: HTTP
+See-also: post301 post303 location
+Added: 7.19.1
+---
+Tells curl to respect RFC 7231/6.4.3 and not convert POST requests into GET
+requests when following a 302 redirection. The non-RFC behaviour is ubiquitous
+in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may require a POST to remain a POST after such
+a redirection. This option is meaningful only when using --location.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post303.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post303.d
new file mode 100644
index 0000000..f8a60ec
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/post303.d
@@ -0,0 +1,11 @@
+Long: post303
+Help: Do not switch to GET after following a 303
+Protocols: HTTP
+See-also: post302 post301 location
+Added: 7.26.0
+---
+Tells curl to respect RFC 7231/6.4.4 and not convert POST requests into GET
+requests when following a 303 redirection. The non-RFC behaviour is ubiquitous
+in web browsers, so curl does the conversion by default to maintain
+consistency. However, a server may require a POST to remain a POST after such
+a redirection. This option is meaningful only when using --location.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/preproxy.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/preproxy.d
new file mode 100644
index 0000000..b8eb77f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/preproxy.d
@@ -0,0 +1,22 @@
+Long: preproxy
+Arg: [protocol://]host[:port]
+Help: Use this proxy first
+Added: 7.52.0
+---
+Use the specified SOCKS proxy before connecting to an HTTP or HTTPS --proxy. In
+such a case curl first connects to the SOCKS proxy and then connects (through
+SOCKS) to the HTTP or HTTPS proxy. Hence pre proxy.
+
+The pre proxy string should be specified with a protocol:// prefix to specify
+alternative proxy protocols. Use socks4://, socks4a://, socks5:// or
+socks5h:// to request the specific SOCKS version to be used. No protocol
+specified will make curl default to SOCKS4.
+
+If the port number is not specified in the proxy string, it is assumed to be
+1080.
+
+User and password that might be provided in the proxy string are URL decoded
+by curl. This allows you to pass in special characters such as @ by using %40
+or pass in a colon with %3a.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/progress-bar.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/progress-bar.d
new file mode 100644
index 0000000..11e95b4
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/progress-bar.d
@@ -0,0 +1,11 @@
+Short: #
+Long: progress-bar
+Help: Display transfer progress as a bar
+---
+Make curl display transfer progress as a simple progress bar instead of the
+standard, more informational, meter.
+
+This progress bar draws a single line of '#' characters across the screen and
+shows a percentage if the transfer size is known. For transfers without a
+known size, it will instead output one '#' character for every 1024 bytes
+transferred.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto-default.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto-default.d
new file mode 100644
index 0000000..ccc3b85
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto-default.d
@@ -0,0 +1,18 @@
+Long: proto-default
+Help: Use PROTOCOL for any URL missing a scheme
+Arg: <protocol>
+Added: 7.45.0
+---
+Tells curl to use \fIprotocol\fP for any URL missing a scheme name.
+
+Example:
+
+ curl --proto-default https ftp.mozilla.org
+
+An unknown or unsupported protocol causes error
+\fICURLE_UNSUPPORTED_PROTOCOL\fP (1).
+
+This option does not change the default proxy protocol (http).
+
+Without this option curl would make a guess based on the host, see --url for
+details.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto-redir.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto-redir.d
new file mode 100644
index 0000000..c9eeeab
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto-redir.d
@@ -0,0 +1,17 @@
+Long: proto-redir
+Arg: <protocols>
+Help: Enable/disable PROTOCOLS on redirect
+Added: 7.20.2
+---
+Tells curl to limit what protocols it may use on redirect. Protocols denied by
+--proto are not overridden by this option. See --proto for how protocols are
+represented.
+
+Example, allow only HTTP and HTTPS on redirect:
+
+ curl --proto-redir -all,http,https http://example.com
+
+By default curl will allow all protocols on redirect except several disabled
+for security reasons: Since 7.19.4 FILE and SCP are disabled, and since 7.40.0
+SMB and SMBS are also disabled. Specifying \fIall\fP or \fI+all\fP enables all
+protocols on redirect, including those disabled for security.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto.d
new file mode 100644
index 0000000..1513fdc
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proto.d
@@ -0,0 +1,43 @@
+Long: proto
+Arg: <protocols>
+Help: Enable/disable PROTOCOLS
+See-also: proto-redir proto-default
+Added: 7.20.2
+---
+Tells curl to limit what protocols it may use in the transfer. Protocols are
+evaluated left to right, are comma separated, and are each a protocol name or
+'all', optionally prefixed by zero or more modifiers. Available modifiers are:
+.RS
+.TP 3
+.B +
+Permit this protocol in addition to protocols already permitted (this is
+the default if no modifier is used).
+.TP
+.B -
+Deny this protocol, removing it from the list of protocols already permitted.
+.TP
+.B =
+Permit only this protocol (ignoring the list already permitted), though
+subject to later modification by subsequent entries in the comma separated
+list.
+.RE
+.IP
+For example:
+.RS
+.TP 15
+.B --proto -ftps
+uses the default protocols, but disables ftps
+.TP
+.B  --proto -all,https,+http
+only enables http and https
+.TP
+.B --proto =http,https
+also only enables http and https
+.RE
+
+Unknown protocols produce a warning. This allows scripts to safely rely on
+being able to disable potentially dangerous protocols, without relying upon
+support for that protocol being built into curl to avoid an error.
+
+This option can be used multiple times, in which case the effect is the same
+as concatenating the protocols into one instance of the option.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-anyauth.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-anyauth.d
new file mode 100644
index 0000000..b60d0a0
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-anyauth.d
@@ -0,0 +1,7 @@
+Long: proxy-anyauth
+Help: Pick any proxy authentication method
+Added: 7.13.2
+See-also: proxy proxy-basic proxy-digest
+---
+Tells curl to pick a suitable authentication method when communicating with
+the given HTTP proxy. This might cause an extra request/response round-trip.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-basic.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-basic.d
new file mode 100644
index 0000000..566f890
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-basic.d
@@ -0,0 +1,7 @@
+Long: proxy-basic
+Help: Use Basic authentication on the proxy
+See-also: proxy proxy-anyauth proxy-digest
+---
+Tells curl to use HTTP Basic authentication when communicating with the given
+proxy. Use --basic for enabling HTTP Basic with a remote host. Basic is the
+default authentication method curl uses with proxies.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cacert.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cacert.d
new file mode 100644
index 0000000..2713dd2
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cacert.d
@@ -0,0 +1,7 @@
+Long: proxy-cacert
+Help: CA certificate to verify peer against for proxy
+Arg: <file>
+Added: 7.52.0
+See-also: proxy-capath cacert capath proxy
+---
+Same as --cacert but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-capath.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-capath.d
new file mode 100644
index 0000000..177246a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-capath.d
@@ -0,0 +1,7 @@
+Long: proxy-capath
+Help: CA directory to verify peer against for proxy
+Arg: <dir>
+Added: 7.52.0
+See-also: proxy-cacert proxy capath
+---
+Same as --capath but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cert-type.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cert-type.d
new file mode 100644
index 0000000..8c9e788
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cert-type.d
@@ -0,0 +1,6 @@
+Long: proxy-cert-type
+Arg: <type>
+Added: 7.52.0
+Help: Client certificate type for HTTS proxy
+---
+Same as --cert-type but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cert.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cert.d
new file mode 100644
index 0000000..43acd39
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-cert.d
@@ -0,0 +1,6 @@
+Long: proxy-cert
+Arg: <cert[:passwd]>
+Help: Set client certificate for proxy
+Added: 7.52.0
+---
+Same as --cert but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ciphers.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ciphers.d
new file mode 100644
index 0000000..dcac812
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ciphers.d
@@ -0,0 +1,6 @@
+Long: proxy-ciphers
+Arg: <list>
+Help: SSL ciphers to use for proxy
+Added: 7.52.0
+---
+Same as --ciphers but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-crlfile.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-crlfile.d
new file mode 100644
index 0000000..1d6247f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-crlfile.d
@@ -0,0 +1,6 @@
+Long: proxy-crlfile
+Arg: <file>
+Help: Set a CRL list for proxy
+Added: 7.52.0
+---
+Same as --crlfile but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-digest.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-digest.d
new file mode 100644
index 0000000..ccf4663
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-digest.d
@@ -0,0 +1,6 @@
+Long: proxy-digest
+Help: Use Digest authentication on the proxy
+See-also: proxy proxy-anyauth proxy-basic
+---
+Tells curl to use HTTP Digest authentication when communicating with the given
+proxy. Use --digest for enabling HTTP Digest with a remote host.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-header.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-header.d
new file mode 100644
index 0000000..1ef696b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-header.d
@@ -0,0 +1,20 @@
+Long: proxy-header
+Arg: <header>
+Help: Pass custom header LINE to proxy
+Protocols: HTTP
+Added: 7.37.0
+---
+Extra header to include in the request when sending HTTP to a proxy. You may
+specify any number of extra headers. This is the equivalent option to --header
+but is for proxy communication only like in CONNECT requests when you want a
+separate header sent to the proxy to what is sent to the actual remote host.
+
+curl will make sure that each header you add/replace is sent with the proper
+end-of-line marker, you should thus \fBnot\fP add that as a part of the header
+content: do not add newlines or carriage returns, they will only mess things
+up for you.
+
+Headers specified with this option will not be included in requests that curl
+knows will not be sent to a proxy.
+
+This option can be used multiple times to add/replace/remove multiple headers.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-insecure.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-insecure.d
new file mode 100644
index 0000000..762828f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-insecure.d
@@ -0,0 +1,5 @@
+Long: proxy-insecure
+Help: Do HTTPS proxy connections without verifying the proxy
+Added: 7.52.0
+---
+Same as --insecure but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-key-type.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-key-type.d
new file mode 100644
index 0000000..ce7482a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-key-type.d
@@ -0,0 +1,6 @@
+Long: proxy-key-type
+Arg: <type>
+Help: Private key file type for proxy
+Added: 7.52.0
+---
+Same as --key-type but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-key.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-key.d
new file mode 100644
index 0000000..e61eb18
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-key.d
@@ -0,0 +1,5 @@
+Long: proxy-key
+Help: Private key for HTTPS proxy
+Arg: <key>
+---
+Same as --key but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-negotiate.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-negotiate.d
new file mode 100644
index 0000000..775f62a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-negotiate.d
@@ -0,0 +1,8 @@
+Long: proxy-negotiate
+Help: Use HTTP Negotiate (SPNEGO) authentication on the proxy
+Added: 7.17.1
+See-also: proxy-anyauth proxy-basic
+---
+Tells curl to use HTTP Negotiate (SPNEGO) authentication when communicating
+with the given proxy. Use --negotiate for enabling HTTP Negotiate (SPNEGO)
+with a remote host.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ntlm.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ntlm.d
new file mode 100644
index 0000000..c30db53
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ntlm.d
@@ -0,0 +1,6 @@
+Long: proxy-ntlm
+Help: Use NTLM authentication on the proxy
+See-also: proxy-negotiate proxy-anyauth
+---
+Tells curl to use HTTP NTLM authentication when communicating with the given
+proxy. Use --ntlm for enabling NTLM with a remote host.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-pass.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-pass.d
new file mode 100644
index 0000000..3371714
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-pass.d
@@ -0,0 +1,6 @@
+Long: proxy-pass
+Arg: <phrase>
+Help: Pass phrase for the private key for HTTPS proxy
+Added: 7.52.0
+---
+Same as --pass but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-service-name.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-service-name.d
new file mode 100644
index 0000000..e774d24
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-service-name.d
@@ -0,0 +1,6 @@
+long: proxy-service-name
+Arg: <name>
+Help: SPNEGO proxy service name
+Added: 7.43.0
+---
+This option allows you to change the service name for proxy negotiation.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ssl-allow-beast.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ssl-allow-beast.d
new file mode 100644
index 0000000..de96b84
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-ssl-allow-beast.d
@@ -0,0 +1,5 @@
+Long: proxy-ssl-allow-beast
+Help: Allow security flaw for interop for HTTPS proxy
+Added: 7.52.0
+---
+Same as --ssl-allow-beast but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsauthtype.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsauthtype.d
new file mode 100644
index 0000000..7d0ce8e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsauthtype.d
@@ -0,0 +1,6 @@
+Long: proxy-tlsauthtype
+Arg: <type>
+Help: TLS authentication type for HTTPS proxy
+Added: 7.52.0
+---
+Same as --tlsauthtype but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlspassword.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlspassword.d
new file mode 100644
index 0000000..cf00384
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlspassword.d
@@ -0,0 +1,6 @@
+Long: proxy-tlspassword
+Arg: <string>
+Help: TLS password for HTTPS proxy
+Added: 7.52.0
+---
+Same as --tlspassword but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsuser.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsuser.d
new file mode 100644
index 0000000..758a7c9
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsuser.d
@@ -0,0 +1,6 @@
+Long: proxy-tlsuser
+Arg: <name>
+Help: TLS username for HTTPS proxy
+Added: 7.52.0
+---
+Same as --tlsuser but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsv1.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsv1.d
new file mode 100644
index 0000000..d024eea
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-tlsv1.d
@@ -0,0 +1,5 @@
+Long: proxy-tlsv1
+Help: Use TLSv1 for HTTPS proxy
+Added: 7.52.0
+---
+Same as --tlsv1 but used in HTTPS proxy context.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-user.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-user.d
new file mode 100644
index 0000000..b1f6f6e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy-user.d
@@ -0,0 +1,12 @@
+Long: proxy-user
+Short: U
+Arg: <user:password>
+Help: Proxy user and password
+---
+Specify the user name and password to use for proxy authentication.
+
+If you use a Windows SSPI-enabled curl binary and do either Negotiate or NTLM
+authentication then you can tell curl to select the user name and password
+from your environment by specifying a single colon with this option: "-U :".
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy.d
new file mode 100644
index 0000000..6506692
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy.d
@@ -0,0 +1,39 @@
+Long: proxy
+Short: x
+Arg: [protocol://]host[:port]
+Help: Use this proxy
+---
+Use the specified proxy.
+
+The proxy string can be specified with a protocol:// prefix. No protocol
+specified or http:// will be treated as HTTP proxy. Use socks4://, socks4a://,
+socks5:// or socks5h:// to request a specific SOCKS version to be used.
+(The protocol support was added in curl 7.21.7)
+
+HTTPS proxy support via https:// protocol prefix was added in 7.52.0 for
+OpenSSL, GnuTLS and NSS.
+
+Unrecognized and unsupported proxy protocols cause an error since 7.52.0.
+Prior versions may ignore the protocol and use http:// instead.
+
+If the port number is not specified in the proxy string, it is assumed to be
+1080.
+
+This option overrides existing environment variables that set the proxy to
+use. If there's an environment variable setting a proxy, you can set proxy to
+\&"" to override it.
+
+All operations that are performed over an HTTP proxy will transparently be
+converted to HTTP. It means that certain protocol specific operations might
+not be available. This is not the case if you can tunnel through the proxy, as
+one with the --proxytunnel option.
+
+User and password that might be provided in the proxy string are URL decoded
+by curl. This allows you to pass in special characters such as @ by using %40
+or pass in a colon with %3a.
+
+The proxy host can be specified the exact same way as the proxy environment
+variables, including the protocol prefix (http://) and the embedded user +
+password.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy1.0.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy1.0.d
new file mode 100644
index 0000000..4a931bd
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxy1.0.d
@@ -0,0 +1,10 @@
+Long: proxy1.0
+Arg: <host[:port]>
+Help: Use HTTP/1.0 proxy on given port
+---
+Use the specified HTTP 1.0 proxy. If the port number is not specified, it is
+assumed at port 1080.
+
+The only difference between this and the HTTP proxy option --proxy, is that
+attempts to use CONNECT through the proxy will specify an HTTP 1.0 protocol
+instead of the default HTTP 1.1.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxytunnel.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxytunnel.d
new file mode 100644
index 0000000..f2e8b80
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/proxytunnel.d
@@ -0,0 +1,13 @@
+Long: proxytunnel
+Short: p
+Help: Operate through a HTTP proxy tunnel (using CONNECT)
+See-also: proxy
+---
+When an HTTP proxy is used --proxy, this option will cause non-HTTP protocols
+to attempt to tunnel through the proxy instead of merely using it to do
+HTTP-like operations. The tunnel approach is made with the HTTP proxy CONNECT
+request and requires that the proxy allows direct connect to the remote port
+number curl wants to tunnel through to.
+
+To suppress proxy CONNECT response headers when curl is set to output headers
+use --suppress-connect-headers.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pubkey.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pubkey.d
new file mode 100644
index 0000000..b2e11c0
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/pubkey.d
@@ -0,0 +1,14 @@
+Long: pubkey
+Arg: <key>
+Protocols: SFTP SCP
+Help: SSH Public key file name
+---
+Public key file name. Allows you to provide your public key in this separate
+file.
+
+If this option is used several times, the last one will be used.
+
+(As of 7.39.0, curl attempts to automatically extract the public key from the
+private key file, so passing this option is generally not required. Note that
+this public key extraction requires libcurl to be linked against a copy of
+libssh2 1.2.8 or higher that is itself linked against OpenSSL.)
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/quote.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/quote.d
new file mode 100644
index 0000000..cdd3ca6
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/quote.d
@@ -0,0 +1,56 @@
+Long: quote
+Short: Q
+Help: Send command(s) to server before transfer
+Protocols: FTP SFTP
+---
+
+Send an arbitrary command to the remote FTP or SFTP server. Quote commands are
+sent BEFORE the transfer takes place (just after the initial PWD command in an
+FTP transfer, to be exact). To make commands take place after a successful
+transfer, prefix them with a dash '-'.  To make commands be sent after curl
+has changed the working directory, just before the transfer command(s), prefix
+the command with a '+' (this is only supported for FTP). You may specify any
+number of commands.
+
+If the server returns failure for one of the commands, the entire operation
+will be aborted. You must send syntactically correct FTP commands as RFC 959
+defines to FTP servers, or one of the commands listed below to SFTP servers.
+
+This option can be used multiple times. When speaking to an FTP server, prefix
+the command with an asterisk (*) to make curl continue even if the command
+fails as by default curl will stop at first failure.
+
+SFTP is a binary protocol. Unlike for FTP, curl interprets SFTP quote commands
+itself before sending them to the server.  File names may be quoted
+shell-style to embed spaces or special characters.  Following is the list of
+all supported SFTP quote commands:
+.RS
+.IP "chgrp group file"
+The chgrp command sets the group ID of the file named by the file operand to
+the group ID specified by the group operand. The group operand is a decimal
+integer group ID.
+.IP "chmod mode file"
+The chmod command modifies the file mode bits of the specified file. The
+mode operand is an octal integer mode number.
+.IP "chown user file"
+The chown command sets the owner of the file named by the file operand to the
+user ID specified by the user operand. The user operand is a decimal
+integer user ID.
+.IP "ln source_file target_file"
+The ln and symlink commands create a symbolic link at the target_file location
+pointing to the source_file location.
+.IP "mkdir directory_name"
+The mkdir command creates the directory named by the directory_name operand.
+.IP "pwd"
+The pwd command returns the absolute pathname of the current working directory.
+.IP "rename source target"
+The rename command renames the file or directory named by the source
+operand to the destination path named by the target operand.
+.IP "rm file"
+The rm command removes the file specified by the file operand.
+.IP "rmdir directory"
+The rmdir command removes the directory entry specified by the directory
+operand, provided it is empty.
+.IP "symlink source_file target_file"
+See ln.
+.RE
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/random-file.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/random-file.d
new file mode 100644
index 0000000..51626f8
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/random-file.d
@@ -0,0 +1,7 @@
+Long: random-file
+Arg: <file>
+Help: File for reading random data from
+---
+Specify the path name to file containing what will be considered as random
+data. The data may be used to seed the random engine for SSL connections.  See
+also the --egd-file option.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/range.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/range.d
new file mode 100644
index 0000000..760d15e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/range.d
@@ -0,0 +1,46 @@
+Long: range
+Short: r
+Help: Retrieve only the bytes within RANGE
+Arg: <range>
+Protocols: HTTP FTP SFTP FILE
+---
+Retrieve a byte range (i.e a partial document) from a HTTP/1.1, FTP or SFTP
+server or a local FILE. Ranges can be specified in a number of ways.
+.RS
+.TP 10
+.B 0-499
+specifies the first 500 bytes
+.TP
+.B 500-999
+specifies the second 500 bytes
+.TP
+.B -500
+specifies the last 500 bytes
+.TP
+.B 9500-
+specifies the bytes from offset 9500 and forward
+.TP
+.B 0-0,-1
+specifies the first and last byte only(*)(HTTP)
+.TP
+.B 100-199,500-599
+specifies two separate 100-byte ranges(*) (HTTP)
+.RE
+.IP
+(*) = NOTE that this will cause the server to reply with a multipart
+response!
+
+Only digit characters (0-9) are valid in the 'start' and 'stop' fields of the
+\&'start-stop' range syntax. If a non-digit character is given in the range,
+the server's response will be unspecified, depending on the server's
+configuration.
+
+You should also be aware that many HTTP/1.1 servers do not have this feature
+enabled, so that when you attempt to get a range, you'll instead get the whole
+document.
+
+FTP and SFTP range downloads only support the simple 'start-stop' syntax
+(optionally with one of the numbers omitted). FTP use depends on the extended
+FTP command SIZE.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/raw.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/raw.d
new file mode 100644
index 0000000..c3328e6
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/raw.d
@@ -0,0 +1,7 @@
+Long: raw
+Help: Do HTTP "raw"; no transfer decoding
+Added: 7.16.2
+Protocols: HTTP
+---
+When used, it disables all internal HTTP decoding of content or transfer
+encodings and instead makes them passed on unaltered, raw.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/referer.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/referer.d
new file mode 100644
index 0000000..cd84e9d
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/referer.d
@@ -0,0 +1,14 @@
+Long: referer
+Short: e
+Arg: <URL>
+Protocols: HTTP
+Help: Referrer URL
+See-also: user-agent header
+---
+Sends the "Referrer Page" information to the HTTP server. This can also be set
+with the --header flag of course.  When used with --location you can append
+";auto" to the --referer URL to make curl automatically set the previous URL
+when it follows a Location: header. The \&";auto" string can be used alone,
+even if you don't set an initial --referer.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-header-name.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-header-name.d
new file mode 100644
index 0000000..771b6d4
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-header-name.d
@@ -0,0 +1,19 @@
+Long: remote-header-name
+Short: J
+Protocols: HTTP
+Help: Use the header-provided filename
+---
+This option tells the --remote-name option to use the server-specified
+Content-Disposition filename instead of extracting a filename from the URL.
+
+If the server specifies a file name and a file with that name already exists
+in the current working directory it will not be overwritten and an error will
+occur. If the server doesn't specify a file name then this option has no
+effect.
+
+There's no attempt to decode %-sequences (yet) in the provided file name, so
+this option may provide you with rather unexpected file names.
+
+\fBWARNING\fP: Exercise judicious use of this option, especially on Windows. A
+rogue server could send you the name of a DLL or other file that could possibly
+be loaded automatically by Windows or some third party software.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-name-all.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-name-all.d
new file mode 100644
index 0000000..f7a1996
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-name-all.d
@@ -0,0 +1,8 @@
+Long: remote-name-all
+Help: Use the remote file name for all URLs
+Added: 7.19.0
+---
+This option changes the default action for all given URLs to be dealt with as
+if --remote-name were used for each one. So if you want to disable that for a
+specific URL after --remote-name-all has been used, you must use "-o -" or
+--no-remote-name.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-name.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-name.d
new file mode 100644
index 0000000..9fed64b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-name.d
@@ -0,0 +1,21 @@
+Long: remote-name
+Short: O
+Help: Write output to a file named as the remote file
+---
+Write output to a local file named like the remote file we get. (Only the file
+part of the remote file is used, the path is cut off.)
+
+The file will be saved in the current working directory. If you want the file
+saved in a different directory, make sure you change the current working
+directory before invoking curl with this option.
+
+The remote file name to use for saving is extracted from the given URL,
+nothing else, and if it already exists it will be overwritten. If you want the
+server to be able to choose the file name refer to --remote-header-name which
+can be used in addition to this option. If the server chooses a file name and
+that name already exists it will not be overwritten.
+
+There is no URL decoding done on the file name. If it has %20 or other URL
+encoded parts of the name, they will end up as-is as file name.
+
+You may use this option as many times as the number of URLs you have.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-time.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-time.d
new file mode 100644
index 0000000..0f369e0
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/remote-time.d
@@ -0,0 +1,7 @@
+long: remote-time
+short: R
+Help: Set the remote file's time on the local output
+---
+When used, this will make curl attempt to figure out the timestamp of the
+remote file, and if that is available make the local file get that same
+timestamp.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/request.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/request.d
new file mode 100644
index 0000000..3919d42
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/request.d
@@ -0,0 +1,39 @@
+Long: request
+Short: X
+Arg: <command>
+Help: Specify request command to use
+---
+(HTTP) Specifies a custom request method to use when communicating with the
+HTTP server.  The specified request method will be used instead of the method
+otherwise used (which defaults to GET). Read the HTTP 1.1 specification for
+details and explanations. Common additional HTTP requests include PUT and
+DELETE, but related technologies like WebDAV offers PROPFIND, COPY, MOVE and
+more.
+
+Normally you don't need this option. All sorts of GET, HEAD, POST and PUT
+requests are rather invoked by using dedicated command line options.
+
+This option only changes the actual word used in the HTTP request, it does not
+alter the way curl behaves. So for example if you want to make a proper HEAD
+request, using -X HEAD will not suffice. You need to use the --head option.
+
+The method string you set with --request will be used for all requests, which
+if you for example use --location may cause unintended side-effects when curl
+doesn't change request method according to the HTTP 30x response codes - and
+similar.
+
+(FTP)
+Specifies a custom FTP command to use instead of LIST when doing file lists
+with FTP.
+
+(POP3)
+Specifies a custom POP3 command to use instead of LIST or RETR. (Added in
+7.26.0)
+
+(IMAP)
+Specifies a custom IMAP command to use instead of LIST. (Added in 7.30.0)
+
+(SMTP)
+Specifies a custom SMTP command to use instead of HELP or VRFY. (Added in 7.34.0)
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/resolve.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/resolve.d
new file mode 100644
index 0000000..ba3967a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/resolve.d
@@ -0,0 +1,17 @@
+Long: resolve
+Arg: <host:port:address>
+Help: Resolve the host+port to this address
+Added: 7.21.3
+---
+Provide a custom address for a specific host and port pair. Using this, you
+can make the curl requests(s) use a specified address and prevent the
+otherwise normally resolved address to be used. Consider it a sort of
+/etc/hosts alternative provided on the command line. The port number should be
+the number used for the specific protocol the host will be used for. It means
+you need several entries if you want to provide address for the same host but
+different ports.
+
+The provided address set by this option will be used even if --ipv4 or --ipv6
+is set to make curl use another IP version.
+
+This option can be used many times to add many host names to resolve.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-connrefused.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-connrefused.d
new file mode 100644
index 0000000..6a78e1f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-connrefused.d
@@ -0,0 +1,6 @@
+Long: retry-connrefused
+Help: Retry on connection refused (use with --retry)
+Added: 7.52.0
+---
+In addition to the other conditions, consider ECONNREFUSED as a transient
+error too for --retry. This option is used together with --retry.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-delay.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-delay.d
new file mode 100644
index 0000000..43c5aff
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-delay.d
@@ -0,0 +1,11 @@
+long: retry-delay
+arg: <seconds>
+Help: Wait time between retries
+Added: 7.12.3
+---
+Make curl sleep this amount of time before each retry when a transfer has
+failed with a transient error (it changes the default backoff time algorithm
+between retries). This option is only interesting if --retry is also
+used. Setting this delay to zero will make curl use the default backoff time.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-max-time.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-max-time.d
new file mode 100644
index 0000000..1c2f972
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry-max-time.d
@@ -0,0 +1,13 @@
+long: retry-max-time
+Arg: <seconds>
+Help: Retry only within this period
+Added: 7.12.3
+---
+The retry timer is reset before the first transfer attempt. Retries will be
+done as usual (see --retry) as long as the timer hasn't reached this given
+limit. Notice that if the timer hasn't reached the limit, the request will be
+made and while performing, it may take longer than this given time period. To
+limit a single request\'s maximum time, use --max-time.  Set this option to
+zero to not timeout retries.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry.d
new file mode 100644
index 0000000..35215df
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/retry.d
@@ -0,0 +1,17 @@
+Long: retry
+Arg: <num>
+Added: 7.12.3
+Help: Retry request if transient problems occur
+---
+If a transient error is returned when curl tries to perform a transfer, it
+will retry this number of times before giving up. Setting the number to 0
+makes curl do no retries (which is the default). Transient error means either:
+a timeout, an FTP 4xx response code or an HTTP 5xx response code.
+
+When curl is about to retry a transfer, it will first wait one second and then
+for all forthcoming retries it will double the waiting time until it reaches
+10 minutes which then will be the delay between the rest of the retries.  By
+using --retry-delay you disable this exponential backoff algorithm. See also
+--retry-max-time to limit the total time allowed for retries.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sasl-ir.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sasl-ir.d
new file mode 100644
index 0000000..120b19d
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sasl-ir.d
@@ -0,0 +1,5 @@
+long: sasl-ir
+Help: Enable initial response in SASL authentication
+Added: 7.31.0
+---
+Enable initial response in SASL authentication.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/service-name.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/service-name.d
new file mode 100644
index 0000000..4dfeb27
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/service-name.d
@@ -0,0 +1,8 @@
+Long: service-name
+Help: SPNEGO service name
+Arg: <name>
+Added: 7.43.0
+---
+This option allows you to change the service name for SPNEGO.
+
+Examples: --negotiate --service-name sockd would use sockd/server-name.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/show-error.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/show-error.d
new file mode 100644
index 0000000..ede174b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/show-error.d
@@ -0,0 +1,5 @@
+long: show-error
+Short: S
+Help: Show error even when -s is used
+---
+When used with --silent, it makes curl show an error message if it fails.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/silent.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/silent.d
new file mode 100644
index 0000000..7603b76
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/silent.d
@@ -0,0 +1,11 @@
+long: silent
+Short: s
+Help: Silent mode
+See-also: verbose stderr
+---
+Silent or quiet mode. Don't show progress meter or error messages.  Makes Curl
+mute. It will still output the data you ask for, potentially even to the
+terminal/stdout unless you redirect it.
+
+Use --show-error in addition to this option to disable progress meter but
+still show error messages.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks4.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks4.d
new file mode 100644
index 0000000..11f6ae0
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks4.d
@@ -0,0 +1,19 @@
+Long: socks4
+Arg: <host[:port]>
+Help: SOCKS4 proxy on given host + port
+Added: 7.15.2
+---
+Use the specified SOCKS4 proxy. If the port number is not specified, it is
+assumed at port 1080.
+
+This option overrides any previous use of --proxy, as they are mutually
+exclusive.
+
+Since 7.21.7, this option is superfluous since you can specify a socks4 proxy
+with --proxy using a socks4:// protocol prefix.
+
+Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at the same time
+--proxy is used with an HTTP/HTTPS proxy. In such a case curl first connects to
+the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS proxy.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks4a.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks4a.d
new file mode 100644
index 0000000..ae254ae
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks4a.d
@@ -0,0 +1,19 @@
+Long: socks4a
+Arg: <host[:port]>
+Help: SOCKS4a proxy on given host + port
+Added: 7.18.0
+---
+Use the specified SOCKS4a proxy. If the port number is not specified, it is
+assumed at port 1080.
+
+This option overrides any previous use of --proxy, as they are mutually
+exclusive.
+
+Since 7.21.7, this option is superfluous since you can specify a socks4a proxy
+with --proxy using a socks4a:// protocol prefix.
+
+Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at the same time
+--proxy is used with an HTTP/HTTPS proxy. In such a case curl first connects to
+the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS proxy.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-gssapi-nec.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-gssapi-nec.d
new file mode 100644
index 0000000..477e218
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-gssapi-nec.d
@@ -0,0 +1,8 @@
+Long: socks5-gssapi-nec
+Help: Compatibility with NEC SOCKS5 server
+Added: 7.19.4
+---
+As part of the GSS-API negotiation a protection mode is negotiated. RFC 1961
+says in section 4.3/4.4 it should be protected, but the NEC reference
+implementation does not.  The option --socks5-gssapi-nec allows the
+unprotected exchange of the protection mode negotiation.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-gssapi-service.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-gssapi-service.d
new file mode 100644
index 0000000..eb3b240
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-gssapi-service.d
@@ -0,0 +1,12 @@
+Long: socks5-gssapi-service
+Arg: <name>
+Help: SOCKS5 proxy service name for GSS-API
+Added: 7.19.4
+---
+The default service name for a socks server is rcmd/server-fqdn. This option
+allows you to change it.
+
+Examples: --socks5 proxy-name --socks5-gssapi-service sockd would use
+sockd/proxy-name --socks5 proxy-name --socks5-gssapi-service sockd/real-name
+would use sockd/real-name for cases where the proxy-name does not match the
+principal name.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-hostname.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-hostname.d
new file mode 100644
index 0000000..9d9d946
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5-hostname.d
@@ -0,0 +1,19 @@
+Long: socks5-hostname
+Arg: <host[:port]>
+Help: SOCKS5 proxy, pass host name to proxy
+Added: 7.18.0
+---
+Use the specified SOCKS5 proxy (and let the proxy resolve the host name). If
+the port number is not specified, it is assumed at port 1080.
+
+This option overrides any previous use of --proxy, as they are mutually
+exclusive.
+
+Since 7.21.7, this option is superfluous since you can specify a socks5
+hostname proxy with --proxy using a socks5h:// protocol prefix.
+
+Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at the same time
+--proxy is used with an HTTP/HTTPS proxy. In such a case curl first connects to
+the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS proxy.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5.d
new file mode 100644
index 0000000..22fae76
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/socks5.d
@@ -0,0 +1,21 @@
+Long: socks5
+Arg: <host[:port]>
+Help: SOCKS5 proxy on given host + port
+Added: 7.18.0
+---
+Use the specified SOCKS5 proxy - but resolve the host name locally. If the
+port number is not specified, it is assumed at port 1080.
+
+This option overrides any previous use of --proxy, as they are mutually
+exclusive.
+
+Since 7.21.7, this option is superfluous since you can specify a socks5 proxy
+with --proxy using a socks5:// protocol prefix.
+
+Since 7.52.0, --preproxy can be used to specify a SOCKS proxy at the same time
+--proxy is used with an HTTP/HTTPS proxy. In such a case curl first connects to
+the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS proxy.
+
+If this option is used several times, the last one will be used.
+
+This option (as well as --socks4) does not work with IPV6, FTPS or LDAP.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/speed-limit.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/speed-limit.d
new file mode 100644
index 0000000..e2b81c7
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/speed-limit.d
@@ -0,0 +1,10 @@
+Long: speed-limit
+Short: Y
+Arg: <speed>
+Help: Stop transfers slower than this
+---
+If a download is slower than this given speed (in bytes per second) for
+speed-time seconds it gets aborted. speed-time is set with --speed-time and is
+30 if not set.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/speed-time.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/speed-time.d
new file mode 100644
index 0000000..98d6ae1
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/speed-time.d
@@ -0,0 +1,13 @@
+Long: speed-time
+Short: y
+Arg: <seconds>
+Help: Trigger 'speed-limit' abort after this time
+---
+If a download is slower than speed-limit bytes per second during a speed-time
+period, the download gets aborted. If speed-time is used, the default
+speed-limit will be 1 unless set with --speed-limit.
+
+This option controls transfers and thus will not affect slow connects etc. If
+this is a concern for you, try the --connect-timeout option.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-allow-beast.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-allow-beast.d
new file mode 100644
index 0000000..973fcd4
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-allow-beast.d
@@ -0,0 +1,9 @@
+Long: ssl-allow-beast
+Help: Allow security flaw to improve interop
+Added: 7.25.0
+---
+This option tells curl to not work around a security flaw in the SSL3 and
+TLS1.0 protocols known as BEAST.  If this option isn't used, the SSL layer may
+use workarounds known to cause interoperability problems with some older SSL
+implementations. WARNING: this option loosens the SSL security, and by using
+this flag you ask for exactly that.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-no-revoke.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-no-revoke.d
new file mode 100644
index 0000000..cdb6fb5
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-no-revoke.d
@@ -0,0 +1,7 @@
+Long: ssl-no-revoke
+Help: Disable cert revocation checks (WinSSL)
+Added: 7.44.0
+---
+(WinSSL) This option tells curl to disable certificate revocation checks.
+WARNING: this option loosens the SSL security, and by using this flag you ask
+for exactly that.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-reqd.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-reqd.d
new file mode 100644
index 0000000..b21aed1
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl-reqd.d
@@ -0,0 +1,9 @@
+long: ssl-reqd
+Help: Require SSL/TLS
+Protocols: FTP IMAP POP3 SMTP
+Added: 7.20.0
+---
+Require SSL/TLS for the connection.  Terminates the connection if the server
+doesn't support SSL/TLS.
+
+This option was formerly known as --ftp-ssl-reqd.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl.d
new file mode 100644
index 0000000..71c187a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/ssl.d
@@ -0,0 +1,12 @@
+long: ssl
+Help: Try SSL/TLS
+Protocols: FTP IMAP POP3 SMTP
+Added: 7.20.0
+---
+
+Try to use SSL/TLS for the connection.  Reverts to a non-secure connection if
+the server doesn't support SSL/TLS.  See also --ftp-ssl-control and --ssl-reqd
+for different levels of encryption required.
+
+This option was formerly known as --ftp-ssl (Added in 7.11.0). That option
+name can still be used but will be removed in a future version.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sslv2.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sslv2.d
new file mode 100644
index 0000000..67d2b85
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sslv2.d
@@ -0,0 +1,13 @@
+Short: 2
+Long: sslv2
+Tags: Versions
+Protocols: SSL
+Added:
+Mutexed: sslv3 tlsv1 tlsv1.1 tlsv1.2
+Requires: TLS
+See-also: http1.1 http2
+Help: Use SSLv2
+---
+Forces curl to use SSL version 2 when negotiating with a remote SSL
+server. Sometimes curl is built without SSLv2 support. SSLv2 is widely
+considered insecure (see RFC 6176).
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sslv3.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sslv3.d
new file mode 100644
index 0000000..101ad10
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/sslv3.d
@@ -0,0 +1,13 @@
+Short: 3
+Long: sslv3
+Tags: Versions
+Protocols: SSL
+Added:
+Mutexed: sslv2 tlsv1 tlsv1.1 tlsv1.2
+Requires: TLS
+See-also: http1.1 http2
+Help: Use SSLv3
+---
+Forces curl to use SSL version 3 when negotiating with a remote SSL
+server. Sometimes curl is built without SSLv3 support. SSLv3 is widely
+considered insecure (see RFC 7568).
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/stderr.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/stderr.d
new file mode 100644
index 0000000..e8cf7ba
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/stderr.d
@@ -0,0 +1,8 @@
+Long: stderr
+Help: Where to redirect stderr
+See-also: verbose silent
+---
+Redirect all writes to stderr to the specified file instead. If the file name
+is a plain '-', it is instead written to stdout.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/suppress-connect-headers.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/suppress-connect-headers.d
new file mode 100644
index 0000000..d208b89
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/suppress-connect-headers.d
@@ -0,0 +1,8 @@
+Long: suppress-connect-headers
+Help: Suppress proxy CONNECT response headers
+See-also: dump-header include proxytunnel
+---
+When --proxytunnel is used and a CONNECT request is made don't output proxy
+CONNECT response headers. This option is meant to be used with --dump-header or
+--include which are used to show protocol headers in the output. It has no
+effect on debug options such as --verbose or --trace, or any statistics.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tcp-fastopen.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tcp-fastopen.d
new file mode 100644
index 0000000..08e141d
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tcp-fastopen.d
@@ -0,0 +1,5 @@
+Long: tcp-fastopen
+Added: 7.49.0
+Help: Use TCP Fast Open
+---
+Enable use of TCP Fast Open (RFC7413).
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tcp-nodelay.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tcp-nodelay.d
new file mode 100644
index 0000000..f047a7c
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tcp-nodelay.d
@@ -0,0 +1,9 @@
+Long: tcp-nodelay
+Help: Use the TCP_NODELAY option
+Added: 7.11.2
+---
+Turn on the TCP_NODELAY option. See the \fIcurl_easy_setopt(3)\fP man page for
+details about this option.
+
+Since 7.50.2, curl sets this option by default and you need to explicitly
+switch it off if you don't want it on.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/telnet-option.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/telnet-option.d
new file mode 100644
index 0000000..a67cb62
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/telnet-option.d
@@ -0,0 +1,12 @@
+Long: telnet-option
+Short: t
+Arg: <opt=val>
+Help: Set telnet option
+---
+Pass options to the telnet protocol. Supported options are:
+
+TTYPE=<term> Sets the terminal type.
+
+XDISPLOC=<X display> Sets the X display location.
+
+NEW_ENV=<var,val> Sets an environment variable.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tftp-blksize.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tftp-blksize.d
new file mode 100644
index 0000000..04c6c53
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tftp-blksize.d
@@ -0,0 +1,11 @@
+Long: tftp-blksize
+Arg: <value>
+help: Set TFTP BLKSIZE option
+Protocols: TFTP
+Added: 7.20.0
+---
+Set TFTP BLKSIZE option (must be >512). This is the block size that curl will
+try to use when transferring data to or from a TFTP server. By default 512
+bytes will be used.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tftp-no-options.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tftp-no-options.d
new file mode 100644
index 0000000..e2a4dac
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tftp-no-options.d
@@ -0,0 +1,10 @@
+Long: tftp-no-options
+Help: Do not send any TFTP options
+Protocols: TFTP
+Added: 7.48.0
+---
+Tells curl not to send TFTP options requests.
+
+This option improves interop with some legacy servers that do not acknowledge
+or properly implement TFTP options. When this option is used --tftp-blksize is
+ignored.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/time-cond.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/time-cond.d
new file mode 100644
index 0000000..830b4e1
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/time-cond.d
@@ -0,0 +1,17 @@
+Long: time-cond
+Short: z
+Arg: <time>
+Help: Transfer based on a time condition
+Protocols: HTTP FTP
+---
+Request a file that has been modified later than the given time and date, or
+one that has been modified before that time. The <date expression> can be all
+sorts of date strings or if it doesn't match any internal ones, it is taken as
+a filename and tries to get the modification date (mtime) from <file>
+instead. See the \fIcurl_getdate(3)\fP man pages for date expression details.
+
+Start the date expression with a dash (-) to make it request for a document
+that is older than the given date/time, default is a document that is newer
+than the specified date/time.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tls-max.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tls-max.d
new file mode 100644
index 0000000..7ae8622
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tls-max.d
@@ -0,0 +1,24 @@
+Long: tls-max
+Arg: <VERSION>
+Tags: Versions
+Protocols: SSL
+Added: 7.54.0
+Requires: TLS
+See-also: tlsv1.0 tlsv1.1 tlsv1.2
+Help: Use TLSv1.0 or greater
+---
+VERSION defines maximum supported TLS version. A minimum is defined
+by arguments tlsv1.0 or tlsv1.1 or tlsv1.2.
+
+.RS
+.IP "default"
+Use up to recommended TLS version.
+.IP "1.0"
+Use up to TLSv1.0.
+.IP "1.1"
+Use up to TLSv1.1.
+.IP "1.2"
+Use up to TLSv1.2.
+.IP "1.3"
+Use up to TLSv1.3.
+.RE
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsauthtype.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsauthtype.d
new file mode 100644
index 0000000..1b1481f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsauthtype.d
@@ -0,0 +1,8 @@
+Long: tlsauthtype
+Arg: <type>
+Help: TLS authentication type
+Added: 7.21.4
+---
+Set TLS authentication type. Currently, the only supported option is "SRP",
+for TLS-SRP (RFC 5054). If --tlsuser and --tlspassword are specified but
+--tlsauthtype is not, then this option defaults to "SRP".
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlspassword.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlspassword.d
new file mode 100644
index 0000000..234a116
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlspassword.d
@@ -0,0 +1,6 @@
+Long: tlspassword
+Help: TLS password
+Added: 7.21.4
+---
+Set password for use with the TLS authentication method specified with
+--tlsauthtype. Requires that --tlsuser also be set.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsuser.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsuser.d
new file mode 100644
index 0000000..72f1e16
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsuser.d
@@ -0,0 +1,7 @@
+Long: tlsuser
+Arg: <name>
+Help: TLS user name
+Added: 7.21.4
+---
+Set username for use with the TLS authentication method specified with
+--tlsauthtype. Requires that --tlspassword also is set.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.0.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.0.d
new file mode 100644
index 0000000..8789025
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.0.d
@@ -0,0 +1,6 @@
+Long: tlsv1.0
+Help: Use TLSv1.0
+Protocols: TLS
+Added: 7.34.0
+---
+Forces curl to use TLS version 1.0 when connecting to a remote TLS server.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.1.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.1.d
new file mode 100644
index 0000000..9bfdc35
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.1.d
@@ -0,0 +1,6 @@
+Long: tlsv1.1
+Help: Use TLSv1.1
+Protocols: TLS
+Added: 7.34.0
+---
+Forces curl to use TLS version 1.1 when connecting to a remote TLS server.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.2.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.2.d
new file mode 100644
index 0000000..6db94dc
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.2.d
@@ -0,0 +1,6 @@
+Long: tlsv1.2
+Help: Use TLSv1.2
+Protocols: TLS
+Added: 7.34.0
+---
+Forces curl to use TLS version 1.2 when connecting to a remote TLS server.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.3.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.3.d
new file mode 100644
index 0000000..7d9640e
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.3.d
@@ -0,0 +1,9 @@
+Long: tlsv1.3
+Help: Use TLSv1.3
+Protocols: TLS
+Added: 7.52.0
+---
+Forces curl to use TLS version 1.3 when connecting to a remote TLS server.
+
+Note that TLS 1.3 is only supported by a subset of TLS backends. At the time
+of writing this, those are BoringSSL and NSS only.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.d
new file mode 100644
index 0000000..9c9f6b3
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tlsv1.d
@@ -0,0 +1,12 @@
+Short: 1
+Long: tlsv1
+Tags: Versions
+Protocols: SSL
+Added:
+Mutexed: tlsv1.1 tlsv1.2 tlsv1.3
+Requires: TLS
+See-also: http1.1 http2
+Help: Use TLSv1.0 or greater
+---
+Tells curl to use TLS version 1.x when negotiating with a remote TLS
+server. That means TLS version 1.0, 1.1 or 1.2.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tr-encoding.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tr-encoding.d
new file mode 100644
index 0000000..01bb62b
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/tr-encoding.d
@@ -0,0 +1,7 @@
+Long: tr-encoding
+Added: 7.21.6
+Help: Request compressed transfer encoding
+Protocols: HTTP
+---
+Request a compressed Transfer-Encoding response using one of the algorithms
+curl supports, and uncompress the data while receiving it.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace-ascii.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace-ascii.d
new file mode 100644
index 0000000..fceaa71
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace-ascii.d
@@ -0,0 +1,14 @@
+Long: trace-ascii
+Arg: <file>
+Help: Like --trace, but without hex output
+Mutexed: trace verbose
+---
+Enables a full trace dump of all incoming and outgoing data, including
+descriptive information, to the given output file. Use "-" as filename to have
+the output sent to stdout.
+
+This is very similar to --trace, but leaves out the hex part and only shows
+the ASCII part of the dump. It makes smaller output that might be easier to
+read for untrained humans.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace-time.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace-time.d
new file mode 100644
index 0000000..27dcc42
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace-time.d
@@ -0,0 +1,5 @@
+Long: trace-time
+Help: Add time stamps to trace/verbose output
+Added: 7.14.0
+---
+Prepends a time stamp to each trace or verbose line that curl displays.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace.d
new file mode 100644
index 0000000..334ea5a
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/trace.d
@@ -0,0 +1,11 @@
+Long: trace
+Arg: <file>
+Help: Write a debug trace to FILE
+Mutexed: verbose trace-ascii
+---
+Enables a full trace dump of all incoming and outgoing data, including
+descriptive information, to the given output file. Use "-" as filename to have
+the output sent to stdout. Use "%" as filename to have the output sent to
+stderr.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/unix-socket.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/unix-socket.d
new file mode 100644
index 0000000..812d20f
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/unix-socket.d
@@ -0,0 +1,7 @@
+Long: unix-socket
+Arg: <path>
+Help: Connect through this Unix domain socket
+Added: 7.40.0
+Protocols: HTTP
+---
+Connect through this Unix domain socket, instead of using the network.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/upload-file.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/upload-file.d
new file mode 100644
index 0000000..6f01dbf
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/upload-file.d
@@ -0,0 +1,33 @@
+Long: upload-file
+Short: T
+Arg: <file>
+Help: Transfer local FILE to destination
+---
+This transfers the specified local file to the remote URL. If there is no file
+part in the specified URL, curl will append the local file name. NOTE that you
+must use a trailing / on the last directory to really prove to Curl that there
+is no file name or curl will think that your last directory name is the remote
+file name to use. That will most likely cause the upload operation to fail. If
+this is used on an HTTP(S) server, the PUT command will be used.
+
+Use the file name "-" (a single dash) to use stdin instead of a given file.
+Alternately, the file name "." (a single period) may be specified instead
+of "-" to use stdin in non-blocking mode to allow reading server output
+while stdin is being uploaded.
+
+You can specify one --upload-file for each URL on the command line. Each
+--upload-file + URL pair specifies what to upload and to where. curl also
+supports "globbing" of the --upload-file argument, meaning that you can upload
+multiple files to a single URL by using the same URL globbing style supported
+in the URL, like this:
+
+ curl --upload-file "{file1,file2}" http://www.example.com
+
+or even
+
+ curl -T "img[1-1000].png" ftp://ftp.example.com/upload/
+
+When uploading to an SMTP server: the uploaded data is assumed to be RFC 5322
+formatted. It has to feature the necessary set of headers and mail body
+formatted correctly by the user as curl will not transcode nor encode it
+further in any way.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/url.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/url.d
new file mode 100644
index 0000000..c54e1ea
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/url.d
@@ -0,0 +1,15 @@
+long: url
+Arg: <url>
+Help: URL to work with
+---
+Specify a URL to fetch. This option is mostly handy when you want to specify
+URL(s) in a config file.
+
+If the given URL is missing a scheme name (such as "http://" or "ftp://" etc)
+then curl will make a guess based on the host. If the outermost sub-domain
+name matches DICT, FTP, IMAP, LDAP, POP3 or SMTP then that protocol will be
+used, otherwise HTTP will be used. Since 7.45.0 guessing can be disabled by
+setting a default protocol, see --proto-default for details.
+
+This option may be used any number of times. To control where this URL is
+written, use the --output or the --remote-name options.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/use-ascii.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/use-ascii.d
new file mode 100644
index 0000000..d59fad9
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/use-ascii.d
@@ -0,0 +1,8 @@
+Short: B
+Long: use-ascii
+Help: Use ASCII/text transfer
+Protocols: FTP LDAP
+---
+Enable ASCII transfer. For FTP, this can also be enforced by using a URL that
+ends with ";type=A". This option causes data sent to stdout to be in text mode
+for win32 systems.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/user-agent.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/user-agent.d
new file mode 100644
index 0000000..c98619d
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/user-agent.d
@@ -0,0 +1,12 @@
+Short: A
+Long: user-agent
+Arg: <name>
+Help: Send User-Agent <name> to server
+Protocols: HTTP
+---
+
+Specify the User-Agent string to send to the HTTP server. To encode blanks in
+the string, surround the string with single quote marks. This can also be set
+with the --header option of course.
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/user.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/user.d
new file mode 100644
index 0000000..439def3
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/user.d
@@ -0,0 +1,33 @@
+Long: user
+Short: u
+Arg: <user:password>
+Help: Server user and password
+---
+Specify the user name and password to use for server authentication. Overrides
+--netrc and --netrc-optional.
+
+If you simply specify the user name, curl will prompt for a password.
+
+The user name and passwords are split up on the first colon, which makes it
+impossible to use a colon in the user name with this option. The password can,
+still.
+
+When using Kerberos V5 with a Windows based server you should include the
+Windows domain name in the user name, in order for the server to successfully
+obtain a Kerberos Ticket. If you don't then the initial authentication
+handshake may fail.
+
+When using NTLM, the user name can be specified simply as the user name,
+without the domain, if there is a single domain and forest in your setup
+for example.
+
+To specify the domain name use either Down-Level Logon Name or UPN (User
+Principal Name) formats. For example, EXAMPLE\\user and user@example.com
+respectively.
+
+If you use a Windows SSPI-enabled curl binary and perform Kerberos V5,
+Negotiate, NTLM or Digest authentication then you can tell curl to select
+the user name and password from your environment by specifying a single colon
+with this option: "-u :".
+
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/verbose.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/verbose.d
new file mode 100644
index 0000000..5d33521
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/verbose.d
@@ -0,0 +1,19 @@
+Short: v
+Long: verbose
+Mutexed: trace trace-ascii
+Help: Make the operation more talkative
+See-also: include
+---
+Makes curl verbose during the operation. Useful for debugging and seeing
+what's going on "under the hood". A line starting with '>' means "header data"
+sent by curl, '<' means "header data" received by curl that is hidden in
+normal cases, and a line starting with '*' means additional info provided by
+curl.
+
+If you only want HTTP headers in the output, --include might be the option
+you're looking for.
+
+If you think this option still doesn't give you enough details, consider using
+--trace or --trace-ascii instead.
+
+Use --silent to make curl really quiet.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/version.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/version.d
new file mode 100644
index 0000000..196a4a9
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/version.d
@@ -0,0 +1,58 @@
+Long: version
+Short: V
+Help: Show version number and quit
+---
+Displays information about curl and the libcurl version it uses.
+
+The first line includes the full version of curl, libcurl and other 3rd party
+libraries linked with the executable.
+
+The second line (starts with "Protocols:") shows all protocols that libcurl
+reports to support.
+
+The third line (starts with "Features:") shows specific features libcurl
+reports to offer. Available features include:
+.RS
+.IP "IPv6"
+You can use IPv6 with this.
+.IP "krb4"
+Krb4 for FTP is supported.
+.IP "SSL"
+SSL versions of various protocols are supported, such as HTTPS, FTPS, POP3S
+and so on.
+.IP "libz"
+Automatic decompression of compressed files over HTTP is supported.
+.IP "NTLM"
+NTLM authentication is supported.
+.IP "Debug"
+This curl uses a libcurl built with Debug. This enables more error-tracking
+and memory debugging etc. For curl-developers only!
+.IP "AsynchDNS"
+This curl uses asynchronous name resolves. Asynchronous name resolves can be
+done using either the c-ares or the threaded resolver backends.
+.IP "SPNEGO"
+SPNEGO authentication is supported.
+.IP "Largefile"
+This curl supports transfers of large files, files larger than 2GB.
+.IP "IDN"
+This curl supports IDN - international domain names.
+.IP "GSS-API"
+GSS-API is supported.
+.IP "SSPI"
+SSPI is supported.
+.IP "TLS-SRP"
+SRP (Secure Remote Password) authentication is supported for TLS.
+.IP "HTTP2"
+HTTP/2 support has been built-in.
+.IP "UnixSockets"
+Unix sockets support is provided.
+.IP "HTTPS-proxy"
+This curl is built to support HTTPS proxy.
+.IP "Metalink"
+This curl supports Metalink (both version 3 and 4 (RFC 5854)), which
+describes mirrors and hashes.  curl will use mirrors for failover if
+there are errors (such as the file or server not being available).
+.IP "PSL"
+PSL is short for Public Suffix List and means that this curl has been built
+with knowledge about "public suffixes".
+.RE
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/write-out.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/write-out.d
new file mode 100644
index 0000000..3747845
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/write-out.d
@@ -0,0 +1,142 @@
+Long: write-out
+Short: w
+Arg: <format>
+Help: Use output FORMAT after completion
+---
+Make curl display information on stdout after a completed transfer. The format
+is a string that may contain plain text mixed with any number of
+variables. The format can be specified as a literal "string", or you can have
+curl read the format from a file with "@filename" and to tell curl to read the
+format from stdin you write "@-".
+
+The variables present in the output format will be substituted by the value or
+text that curl thinks fit, as described below. All variables are specified as
+%{variable_name} and to output a normal % you just write them as %%. You can
+output a newline by using \\n, a carriage return with \\r and a tab space with
+\\t.
+
+.B NOTE:
+The %-symbol is a special symbol in the win32-environment, where all
+occurrences of % must be doubled when using this option.
+
+The variables available are:
+.RS
+.TP 15
+.B content_type
+The Content-Type of the requested document, if there was any.
+.TP
+.B filename_effective
+The ultimate filename that curl writes out to. This is only meaningful if curl
+is told to write to a file with the --remote-name or --output
+option. It's most useful in combination with the --remote-header-name
+option. (Added in 7.26.0)
+.TP
+.B ftp_entry_path
+The initial path curl ended up in when logging on to the remote FTP
+server. (Added in 7.15.4)
+.TP
+.B http_code
+The numerical response code that was found in the last retrieved HTTP(S) or
+FTP(s) transfer. In 7.18.2 the alias \fBresponse_code\fP was added to show the
+same info.
+.TP
+.B http_connect
+The numerical code that was found in the last response (from a proxy) to a
+curl CONNECT request. (Added in 7.12.4)
+.TP
+.B http_version
+The http version that was effectively used. (Added in 7.50.0)
+.TP
+.B local_ip
+The IP address of the local end of the most recently done connection - can be
+either IPv4 or IPv6 (Added in 7.29.0)
+.TP
+.B local_port
+The local port number of the most recently done connection (Added in 7.29.0)
+.TP
+.B num_connects
+Number of new connects made in the recent transfer. (Added in 7.12.3)
+.TP
+.B num_redirects
+Number of redirects that were followed in the request. (Added in 7.12.3)
+.TP
+.B proxy_ssl_verify_result
+The result of the HTTPS proxy's SSL peer certificate verification that was
+requested. 0 means the verification was successful. (Added in 7.52.0)
+.TP
+.B redirect_url
+When an HTTP request was made without --location to follow redirects (or when
+--max-redir is met), this variable will show the actual URL a redirect
+\fIwould\fP have gone to. (Added in 7.18.2)
+.TP
+.B remote_ip
+The remote IP address of the most recently done connection - can be either
+IPv4 or IPv6 (Added in 7.29.0)
+.TP
+.B remote_port
+The remote port number of the most recently done connection (Added in 7.29.0)
+.TP
+.B scheme
+The URL scheme (sometimes called protocol) that was effectively used (Added in 7.52.0)
+.TP
+.B size_download
+The total amount of bytes that were downloaded.
+.TP
+.B size_header
+The total amount of bytes of the downloaded headers.
+.TP
+.B size_request
+The total amount of bytes that were sent in the HTTP request.
+.TP
+.B size_upload
+The total amount of bytes that were uploaded.
+.TP
+.B speed_download
+The average download speed that curl measured for the complete download. Bytes
+per second.
+.TP
+.B speed_upload
+The average upload speed that curl measured for the complete upload. Bytes per
+second.
+.TP
+.B ssl_verify_result
+The result of the SSL peer certificate verification that was requested. 0
+means the verification was successful. (Added in 7.19.0)
+.TP
+.B time_appconnect
+The time, in seconds, it took from the start until the SSL/SSH/etc
+connect/handshake to the remote host was completed. (Added in 7.19.0)
+.TP
+.B time_connect
+The time, in seconds, it took from the start until the TCP connect to the
+remote host (or proxy) was completed.
+.TP
+.B time_namelookup
+The time, in seconds, it took from the start until the name resolving was
+completed.
+.TP
+.B time_pretransfer
+The time, in seconds, it took from the start until the file transfer was just
+about to begin. This includes all pre-transfer commands and negotiations that
+are specific to the particular protocol(s) involved.
+.TP
+.B time_redirect
+The time, in seconds, it took for all redirection steps including name lookup,
+connect, pretransfer and transfer before the final transaction was
+started. time_redirect shows the complete execution time for multiple
+redirections. (Added in 7.12.3)
+.TP
+.B time_starttransfer
+The time, in seconds, it took from the start until the first byte was just
+about to be transferred. This includes time_pretransfer and also the time the
+server needed to calculate the result.
+.TP
+.B time_total
+The total time, in seconds, that the full operation lasted.
+.TP
+.B url_effective
+The URL that was fetched last. This is most meaningful if you've told curl
+to follow location: headers.
+.RE
+.IP
+If this option is used several times, the last one will be used.
diff --git a/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/xattr.d b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/xattr.d
new file mode 100644
index 0000000..b7553da
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/docs/cmdline-opts/xattr.d
@@ -0,0 +1,8 @@
+Long: xattr
+Help: Store metadata in extended file attributes
+---
+When saving output to a file, this option tells curl to store certain file
+metadata in extended file attributes. Currently, the URL is stored in the
+xdg.origin.url attribute and, for HTTP, the content type is stored in
+the mime_type attribute. If the file system does not support extended
+attributes, a warning is issued.