zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/lib/libcurl/curl-7.54.1/src/tool_help.c b/ap/lib/libcurl/curl-7.54.1/src/tool_help.c
new file mode 100644
index 0000000..46aae45
--- /dev/null
+++ b/ap/lib/libcurl/curl-7.54.1/src/tool_help.c
@@ -0,0 +1,567 @@
+/***************************************************************************
+ * _ _ ____ _
+ * Project ___| | | | _ \| |
+ * / __| | | | |_) | |
+ * | (__| |_| | _ <| |___
+ * \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * This software is licensed as described in the file COPYING, which
+ * you should have received as part of this distribution. The terms
+ * are also available at https://curl.haxx.se/docs/copyright.html.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the COPYING file.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ***************************************************************************/
+#include "tool_setup.h"
+
+#include "tool_panykey.h"
+#include "tool_help.h"
+#include "tool_libinfo.h"
+#include "tool_version.h"
+
+#include "memdebug.h" /* keep this as LAST include */
+
+#ifdef MSDOS
+# define USE_WATT32
+#endif
+
+/*
+ * The help output is generated with the following command
+ ---------------------------------------------------------
+
+ cd $srcroot/docs/cmdline-opts
+ ./gen.pl listhelp
+ */
+
+struct helptxt {
+ const char *opt;
+ const char *desc;
+};
+
+static const struct helptxt helptext[] = {
+ {" --abstract-unix-socket <path>",
+ "Connect via abstract Unix domain socket"},
+ {" --anyauth",
+ "Pick any authentication method"},
+ {"-a, --append",
+ "Append to target file when uploading"},
+ {" --basic",
+ "Use HTTP Basic Authentication"},
+ {" --cacert <CA certificate>",
+ "CA certificate to verify peer against"},
+ {" --capath <dir>",
+ "CA directory to verify peer against"},
+ {"-E, --cert <certificate[:password]>",
+ "Client certificate file and password"},
+ {" --cert-status",
+ "Verify the status of the server certificate"},
+ {" --cert-type <type>",
+ "Certificate file type (DER/PEM/ENG)"},
+ {" --ciphers <list of ciphers>",
+ "SSL ciphers to use"},
+ {" --compressed",
+ "Request compressed response"},
+ {"-K, --config <file>",
+ "Read config from a file"},
+ {" --connect-timeout <seconds>",
+ "Maximum time allowed for connection"},
+ {" --connect-to <HOST1:PORT1:HOST2:PORT2>",
+ "Connect to host"},
+ {"-C, --continue-at <offset>",
+ "Resumed transfer offset"},
+ {"-b, --cookie <data>",
+ "Send cookies from string/file"},
+ {"-c, --cookie-jar <filename>",
+ "Write cookies to <filename> after operation"},
+ {" --create-dirs",
+ "Create necessary local directory hierarchy"},
+ {" --crlf",
+ "Convert LF to CRLF in upload"},
+ {" --crlfile <file>",
+ "Get a CRL list in PEM format from the given file"},
+ {"-d, --data <data>",
+ "HTTP POST data"},
+ {" --data-ascii <data>",
+ "HTTP POST ASCII data"},
+ {" --data-binary <data>",
+ "HTTP POST binary data"},
+ {" --data-raw <data>",
+ "HTTP POST data, '@' allowed"},
+ {" --data-urlencode <data>",
+ "HTTP POST data url encoded"},
+ {" --delegation <LEVEL>",
+ "GSS-API delegation permission"},
+ {" --digest",
+ "Use HTTP Digest Authentication"},
+ {"-q, --disable",
+ "Disable .curlrc"},
+ {" --disable-eprt",
+ "Inhibit using EPRT or LPRT"},
+ {" --disable-epsv",
+ "Inhibit using EPSV"},
+ {" --dns-interface <interface>",
+ "Interface to use for DNS requests"},
+ {" --dns-ipv4-addr <address>",
+ "IPv4 address to use for DNS requests"},
+ {" --dns-ipv6-addr <address>",
+ "IPv6 address to use for DNS requests"},
+ {" --dns-servers <addresses>",
+ "DNS server addrs to use"},
+ {"-D, --dump-header <filename>",
+ "Write the received headers to <filename>"},
+ {" --egd-file <file>",
+ "EGD socket path for random data"},
+ {" --engine <name>",
+ "Crypto engine to use"},
+ {" --expect100-timeout <seconds>",
+ "How long to wait for 100-continue"},
+ {"-f, --fail",
+ "Fail silently (no output at all) on HTTP errors"},
+ {" --fail-early",
+ "Fail on first transfer error, do not continue"},
+ {" --false-start",
+ "Enable TLS False Start"},
+ {"-F, --form <name=content>",
+ "Specify HTTP multipart POST data"},
+ {" --form-string <name=string>",
+ "Specify HTTP multipart POST data"},
+ {" --ftp-account <data>",
+ "Account data string"},
+ {" --ftp-alternative-to-user <command>",
+ "String to replace USER [name]"},
+ {" --ftp-create-dirs",
+ "Create the remote dirs if not present"},
+ {" --ftp-method <method>",
+ "Control CWD usage"},
+ {" --ftp-pasv",
+ "Use PASV/EPSV instead of PORT"},
+ {"-P, --ftp-port <address>",
+ "Use PORT instead of PASV"},
+ {" --ftp-pret",
+ "Send PRET before PASV"},
+ {" --ftp-skip-pasv-ip",
+ "Skip the IP address for PASV"},
+ {" --ftp-ssl-ccc",
+ "Send CCC after authenticating"},
+ {" --ftp-ssl-ccc-mode <active/passive>",
+ "Set CCC mode"},
+ {" --ftp-ssl-control",
+ "Require SSL/TLS for FTP login, clear for transfer"},
+ {"-G, --get",
+ "Put the post data in the URL and use GET"},
+ {"-g, --globoff",
+ "Disable URL sequences and ranges using {} and []"},
+ {"-I, --head",
+ "Show document info only"},
+ {"-H, --header <header>",
+ "Pass custom header LINE to server"},
+ {"-h, --help",
+ "This help text"},
+ {" --hostpubmd5 <md5>",
+ "Acceptable MD5 hash of the host public key"},
+ {"-0, --http1.0",
+ "Use HTTP 1.0"},
+ {" --http1.1",
+ "Use HTTP 1.1"},
+ {" --http2",
+ "Use HTTP 2"},
+ {" --http2-prior-knowledge",
+ "Use HTTP 2 without HTTP/1.1 Upgrade"},
+ {" --ignore-content-length",
+ "Ignore the size of the remote resource"},
+ {"-i, --include",
+ "Include protocol headers in the output"},
+ {"-k, --insecure",
+ "Allow insecure server connections when using SSL"},
+ {" --interface <name>",
+ "Use network INTERFACE (or address)"},
+ {"-4, --ipv4",
+ "Resolve names to IPv4 addresses"},
+ {"-6, --ipv6",
+ "Resolve names to IPv6 addresses"},
+ {"-j, --junk-session-cookies",
+ "Ignore session cookies read from file"},
+ {" --keepalive-time <seconds>",
+ "Interval time for keepalive probes"},
+ {" --key <key>",
+ "Private key file name"},
+ {" --key-type <type>",
+ "Private key file type (DER/PEM/ENG)"},
+ {" --krb <level>",
+ "Enable Kerberos with security <level>"},
+ {" --libcurl <file>",
+ "Dump libcurl equivalent code of this command line"},
+ {" --limit-rate <speed>",
+ "Limit transfer speed to RATE"},
+ {"-l, --list-only",
+ "List only mode"},
+ {" --local-port <num/range>",
+ "Force use of RANGE for local port numbers"},
+ {"-L, --location",
+ "Follow redirects"},
+ {" --location-trusted",
+ "Like --location, and send auth to other hosts"},
+ {" --login-options <options>",
+ "Server login options"},
+ {" --mail-auth <address>",
+ "Originator address of the original email"},
+ {" --mail-from <address>",
+ "Mail from this address"},
+ {" --mail-rcpt <address>",
+ "Mail from this address"},
+ {"-M, --manual",
+ "Display the full manual"},
+ {" --max-filesize <bytes>",
+ "Maximum file size to download"},
+ {" --max-redirs <num>",
+ "Maximum number of redirects allowed"},
+ {"-m, --max-time <time>",
+ "Maximum time allowed for the transfer"},
+ {" --metalink",
+ "Process given URLs as metalink XML file"},
+ {" --negotiate",
+ "Use HTTP Negotiate (SPNEGO) authentication"},
+ {"-n, --netrc",
+ "Must read .netrc for user name and password"},
+ {" --netrc-file <filename>",
+ "Specify FILE for netrc"},
+ {" --netrc-optional",
+ "Use either .netrc or URL"},
+ {"-:, --next",
+ "Make next URL use its separate set of options"},
+ {" --no-alpn",
+ "Disable the ALPN TLS extension"},
+ {"-N, --no-buffer",
+ "Disable buffering of the output stream"},
+ {" --no-keepalive",
+ "Disable TCP keepalive on the connection"},
+ {" --no-npn",
+ "Disable the NPN TLS extension"},
+ {" --no-sessionid",
+ "Disable SSL session-ID reusing"},
+ {" --noproxy <no-proxy-list>",
+ "List of hosts which do not use proxy"},
+ {" --ntlm",
+ "Use HTTP NTLM authentication"},
+ {" --ntlm-wb",
+ "Use HTTP NTLM authentication with winbind"},
+ {" --oauth2-bearer",
+ "OAuth 2 Bearer Token"},
+ {"-o, --output <file>",
+ "Write to file instead of stdout"},
+ {" --pass <phrase>",
+ "Pass phrase for the private key"},
+ {" --path-as-is",
+ "Do not squash .. sequences in URL path"},
+ {" --pinnedpubkey <hashes>",
+ "FILE/HASHES Public key to verify peer against"},
+ {" --post301",
+ "Do not switch to GET after following a 301"},
+ {" --post302",
+ "Do not switch to GET after following a 302"},
+ {" --post303",
+ "Do not switch to GET after following a 303"},
+ {" --preproxy [protocol://]host[:port]",
+ "Use this proxy first"},
+ {"-#, --progress-bar",
+ "Display transfer progress as a bar"},
+ {" --proto <protocols>",
+ "Enable/disable PROTOCOLS"},
+ {" --proto-default <protocol>",
+ "Use PROTOCOL for any URL missing a scheme"},
+ {" --proto-redir <protocols>",
+ "Enable/disable PROTOCOLS on redirect"},
+ {"-x, --proxy [protocol://]host[:port]",
+ "Use this proxy"},
+ {" --proxy-anyauth",
+ "Pick any proxy authentication method"},
+ {" --proxy-basic",
+ "Use Basic authentication on the proxy"},
+ {" --proxy-cacert <file>",
+ "CA certificate to verify peer against for proxy"},
+ {" --proxy-capath <dir>",
+ "CA directory to verify peer against for proxy"},
+ {" --proxy-cert <cert[:passwd]>",
+ "Set client certificate for proxy"},
+ {" --proxy-cert-type <type>",
+ "Client certificate type for HTTS proxy"},
+ {" --proxy-ciphers <list>",
+ "SSL ciphers to use for proxy"},
+ {" --proxy-crlfile <file>",
+ "Set a CRL list for proxy"},
+ {" --proxy-digest",
+ "Use Digest authentication on the proxy"},
+ {" --proxy-header <header>",
+ "Pass custom header LINE to proxy"},
+ {" --proxy-insecure",
+ "Do HTTPS proxy connections without verifying the proxy"},
+ {" --proxy-key <key>",
+ "Private key for HTTPS proxy"},
+ {" --proxy-key-type <type>",
+ "Private key file type for proxy"},
+ {" --proxy-negotiate",
+ "Use HTTP Negotiate (SPNEGO) authentication on the proxy"},
+ {" --proxy-ntlm",
+ "Use NTLM authentication on the proxy"},
+ {" --proxy-pass <phrase>",
+ "Pass phrase for the private key for HTTPS proxy"},
+ {" --proxy-service-name <name>",
+ "SPNEGO proxy service name"},
+ {" --proxy-ssl-allow-beast",
+ "Allow security flaw for interop for HTTPS proxy"},
+ {" --proxy-tlsauthtype <type>",
+ "TLS authentication type for HTTPS proxy"},
+ {" --proxy-tlspassword <string>",
+ "TLS password for HTTPS proxy"},
+ {" --proxy-tlsuser <name>",
+ "TLS username for HTTPS proxy"},
+ {" --proxy-tlsv1",
+ "Use TLSv1 for HTTPS proxy"},
+ {"-U, --proxy-user <user:password>",
+ "Proxy user and password"},
+ {" --proxy1.0 <host[:port]>",
+ "Use HTTP/1.0 proxy on given port"},
+ {"-p, --proxytunnel",
+ "Operate through a HTTP proxy tunnel (using CONNECT)"},
+ {" --pubkey <key>",
+ "SSH Public key file name"},
+ {"-Q, --quote",
+ "Send command(s) to server before transfer"},
+ {" --random-file <file>",
+ "File for reading random data from"},
+ {"-r, --range <range>",
+ "Retrieve only the bytes within RANGE"},
+ {" --raw",
+ "Do HTTP \"raw\"; no transfer decoding"},
+ {"-e, --referer <URL>",
+ "Referrer URL"},
+ {"-J, --remote-header-name",
+ "Use the header-provided filename"},
+ {"-O, --remote-name",
+ "Write output to a file named as the remote file"},
+ {" --remote-name-all",
+ "Use the remote file name for all URLs"},
+ {"-R, --remote-time",
+ "Set the remote file's time on the local output"},
+ {"-X, --request <command>",
+ "Specify request command to use"},
+ {" --resolve <host:port:address>",
+ "Resolve the host+port to this address"},
+ {" --retry <num>",
+ "Retry request if transient problems occur"},
+ {" --retry-connrefused",
+ "Retry on connection refused (use with --retry)"},
+ {" --retry-delay <seconds>",
+ "Wait time between retries"},
+ {" --retry-max-time <seconds>",
+ "Retry only within this period"},
+ {" --sasl-ir",
+ "Enable initial response in SASL authentication"},
+ {" --service-name <name>",
+ "SPNEGO service name"},
+ {"-S, --show-error",
+ "Show error even when -s is used"},
+ {"-s, --silent",
+ "Silent mode"},
+ {" --socks4 <host[:port]>",
+ "SOCKS4 proxy on given host + port"},
+ {" --socks4a <host[:port]>",
+ "SOCKS4a proxy on given host + port"},
+ {" --socks5 <host[:port]>",
+ "SOCKS5 proxy on given host + port"},
+ {" --socks5-gssapi-nec",
+ "Compatibility with NEC SOCKS5 server"},
+ {" --socks5-gssapi-service <name>",
+ "SOCKS5 proxy service name for GSS-API"},
+ {" --socks5-hostname <host[:port]>",
+ "SOCKS5 proxy, pass host name to proxy"},
+ {"-Y, --speed-limit <speed>",
+ "Stop transfers slower than this"},
+ {"-y, --speed-time <seconds>",
+ "Trigger 'speed-limit' abort after this time"},
+ {" --ssl",
+ "Try SSL/TLS"},
+ {" --ssl-allow-beast",
+ "Allow security flaw to improve interop"},
+ {" --ssl-no-revoke",
+ "Disable cert revocation checks (WinSSL)"},
+ {" --ssl-reqd",
+ "Require SSL/TLS"},
+ {"-2, --sslv2",
+ "Use SSLv2"},
+ {"-3, --sslv3",
+ "Use SSLv3"},
+ {" --stderr",
+ "Where to redirect stderr"},
+ {" --suppress-connect-headers",
+ "Suppress proxy CONNECT response headers"},
+ {" --tcp-fastopen",
+ "Use TCP Fast Open"},
+ {" --tcp-nodelay",
+ "Use the TCP_NODELAY option"},
+ {"-t, --telnet-option <opt=val>",
+ "Set telnet option"},
+ {" --tftp-blksize <value>",
+ "Set TFTP BLKSIZE option"},
+ {" --tftp-no-options",
+ "Do not send any TFTP options"},
+ {"-z, --time-cond <time>",
+ "Transfer based on a time condition"},
+ {" --tls-max <VERSION>",
+ "Use TLSv1.0 or greater"},
+ {" --tlsauthtype <type>",
+ "TLS authentication type"},
+ {" --tlspassword",
+ "TLS password"},
+ {" --tlsuser <name>",
+ "TLS user name"},
+ {"-1, --tlsv1",
+ "Use TLSv1.0 or greater"},
+ {" --tlsv1.0",
+ "Use TLSv1.0"},
+ {" --tlsv1.1",
+ "Use TLSv1.1"},
+ {" --tlsv1.2",
+ "Use TLSv1.2"},
+ {" --tlsv1.3",
+ "Use TLSv1.3"},
+ {" --tr-encoding",
+ "Request compressed transfer encoding"},
+ {" --trace <file>",
+ "Write a debug trace to FILE"},
+ {" --trace-ascii <file>",
+ "Like --trace, but without hex output"},
+ {" --trace-time",
+ "Add time stamps to trace/verbose output"},
+ {" --unix-socket <path>",
+ "Connect through this Unix domain socket"},
+ {"-T, --upload-file <file>",
+ "Transfer local FILE to destination"},
+ {" --url <url>",
+ "URL to work with"},
+ {"-B, --use-ascii",
+ "Use ASCII/text transfer"},
+ {"-u, --user <user:password>",
+ "Server user and password"},
+ {"-A, --user-agent <name>",
+ "Send User-Agent <name> to server"},
+ {"-v, --verbose",
+ "Make the operation more talkative"},
+ {"-V, --version",
+ "Show version number and quit"},
+ {"-w, --write-out <format>",
+ "Use output FORMAT after completion"},
+ {" --xattr",
+ "Store metadata in extended file attributes"},
+ { NULL, NULL }
+};
+
+#ifdef NETWARE
+# define PRINT_LINES_PAUSE 23
+#endif
+
+#ifdef __SYMBIAN32__
+# define PRINT_LINES_PAUSE 16
+#endif
+
+struct feat {
+ const char *name;
+ int bitmask;
+};
+
+static const struct feat feats[] = {
+ {"AsynchDNS", CURL_VERSION_ASYNCHDNS},
+ {"Debug", CURL_VERSION_DEBUG},
+ {"TrackMemory", CURL_VERSION_CURLDEBUG},
+ {"IDN", CURL_VERSION_IDN},
+ {"IPv6", CURL_VERSION_IPV6},
+ {"Largefile", CURL_VERSION_LARGEFILE},
+ {"SSPI", CURL_VERSION_SSPI},
+ {"GSS-API", CURL_VERSION_GSSAPI},
+ {"Kerberos", CURL_VERSION_KERBEROS5},
+ {"SPNEGO", CURL_VERSION_SPNEGO},
+ {"NTLM", CURL_VERSION_NTLM},
+ {"NTLM_WB", CURL_VERSION_NTLM_WB},
+ {"SSL", CURL_VERSION_SSL},
+ {"libz", CURL_VERSION_LIBZ},
+ {"CharConv", CURL_VERSION_CONV},
+ {"TLS-SRP", CURL_VERSION_TLSAUTH_SRP},
+ {"HTTP2", CURL_VERSION_HTTP2},
+ {"UnixSockets", CURL_VERSION_UNIX_SOCKETS},
+ {"HTTPS-proxy", CURL_VERSION_HTTPS_PROXY}
+};
+
+void tool_help(void)
+{
+ int i;
+ puts("Usage: curl [options...] <url>");
+ for(i = 0; helptext[i].opt; i++) {
+ printf(" %-19s %s\n", helptext[i].opt, helptext[i].desc);
+#ifdef PRINT_LINES_PAUSE
+ if(i && ((i % PRINT_LINES_PAUSE) == 0))
+ tool_pressanykey();
+#endif
+ }
+}
+
+void tool_version_info(void)
+{
+ const char *const *proto;
+
+ printf(CURL_ID "%s\n", curl_version());
+#ifdef CURL_PATCHSTAMP
+ printf("Release-Date: %s, security patched: %s\n",
+ LIBCURL_TIMESTAMP, CURL_PATCHSTAMP);
+#else
+ printf("Release-Date: %s\n", LIBCURL_TIMESTAMP);
+#endif
+ if(curlinfo->protocols) {
+ printf("Protocols: ");
+ for(proto = curlinfo->protocols; *proto; ++proto) {
+ printf("%s ", *proto);
+ }
+ puts(""); /* newline */
+ }
+ if(curlinfo->features) {
+ unsigned int i;
+ printf("Features: ");
+ for(i = 0; i < sizeof(feats)/sizeof(feats[0]); i++) {
+ if(curlinfo->features & feats[i].bitmask)
+ printf("%s ", feats[i].name);
+ }
+#ifdef USE_METALINK
+ printf("Metalink ");
+#endif
+#ifdef USE_LIBPSL
+ printf("PSL ");
+#endif
+ puts(""); /* newline */
+ }
+}
+
+void tool_list_engines(CURL *curl)
+{
+ struct curl_slist *engines = NULL;
+
+ /* Get the list of engines */
+ curl_easy_getinfo(curl, CURLINFO_SSL_ENGINES, &engines);
+
+ puts("Build-time engines:");
+ if(engines) {
+ for(; engines; engines = engines->next)
+ printf(" %s\n", engines->data);
+ }
+ else {
+ puts(" <none>");
+ }
+
+ /* Cleanup the list of engines */
+ curl_slist_free_all(engines);
+}