zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/lib/libssl/openssl-1.1.1o/crypto/chacha/asm/chacha-armv8.pl b/ap/lib/libssl/openssl-1.1.1o/crypto/chacha/asm/chacha-armv8.pl
new file mode 100755
index 0000000..84c9801
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/crypto/chacha/asm/chacha-armv8.pl
@@ -0,0 +1,1145 @@
+#! /usr/bin/env perl
+# Copyright 2016-2020 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# June 2015
+#
+# ChaCha20 for ARMv8.
+#
+# Performance in cycles per byte out of large buffer.
+#
+# IALU/gcc-4.9 3xNEON+1xIALU 6xNEON+2xIALU
+#
+# Apple A7 5.50/+49% 3.33 1.70
+# Cortex-A53 8.40/+80% 4.72 4.72(*)
+# Cortex-A57 8.06/+43% 4.90 4.43(**)
+# Denver 4.50/+82% 2.63 2.67(*)
+# X-Gene 9.50/+46% 8.82 8.89(*)
+# Mongoose 8.00/+44% 3.64 3.25
+# Kryo 8.17/+50% 4.83 4.65
+#
+# (*) it's expected that doubling interleave factor doesn't help
+# all processors, only those with higher NEON latency and
+# higher instruction issue rate;
+# (**) expected improvement was actually higher;
+
+$flavour=shift;
+$output=shift;
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+die "can't locate arm-xlate.pl";
+
+open OUT,"| \"$^X\" $xlate $flavour $output";
+*STDOUT=*OUT;
+
+sub AUTOLOAD() # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+ my $arg = pop;
+ $arg = "#$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+my ($out,$inp,$len,$key,$ctr) = map("x$_",(0..4));
+
+my @x=map("x$_",(5..17,19..21));
+my @d=map("x$_",(22..28,30));
+
+sub ROUND {
+my ($a0,$b0,$c0,$d0)=@_;
+my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
+my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
+my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
+
+ (
+ "&add_32 (@x[$a0],@x[$a0],@x[$b0])",
+ "&add_32 (@x[$a1],@x[$a1],@x[$b1])",
+ "&add_32 (@x[$a2],@x[$a2],@x[$b2])",
+ "&add_32 (@x[$a3],@x[$a3],@x[$b3])",
+ "&eor_32 (@x[$d0],@x[$d0],@x[$a0])",
+ "&eor_32 (@x[$d1],@x[$d1],@x[$a1])",
+ "&eor_32 (@x[$d2],@x[$d2],@x[$a2])",
+ "&eor_32 (@x[$d3],@x[$d3],@x[$a3])",
+ "&ror_32 (@x[$d0],@x[$d0],16)",
+ "&ror_32 (@x[$d1],@x[$d1],16)",
+ "&ror_32 (@x[$d2],@x[$d2],16)",
+ "&ror_32 (@x[$d3],@x[$d3],16)",
+
+ "&add_32 (@x[$c0],@x[$c0],@x[$d0])",
+ "&add_32 (@x[$c1],@x[$c1],@x[$d1])",
+ "&add_32 (@x[$c2],@x[$c2],@x[$d2])",
+ "&add_32 (@x[$c3],@x[$c3],@x[$d3])",
+ "&eor_32 (@x[$b0],@x[$b0],@x[$c0])",
+ "&eor_32 (@x[$b1],@x[$b1],@x[$c1])",
+ "&eor_32 (@x[$b2],@x[$b2],@x[$c2])",
+ "&eor_32 (@x[$b3],@x[$b3],@x[$c3])",
+ "&ror_32 (@x[$b0],@x[$b0],20)",
+ "&ror_32 (@x[$b1],@x[$b1],20)",
+ "&ror_32 (@x[$b2],@x[$b2],20)",
+ "&ror_32 (@x[$b3],@x[$b3],20)",
+
+ "&add_32 (@x[$a0],@x[$a0],@x[$b0])",
+ "&add_32 (@x[$a1],@x[$a1],@x[$b1])",
+ "&add_32 (@x[$a2],@x[$a2],@x[$b2])",
+ "&add_32 (@x[$a3],@x[$a3],@x[$b3])",
+ "&eor_32 (@x[$d0],@x[$d0],@x[$a0])",
+ "&eor_32 (@x[$d1],@x[$d1],@x[$a1])",
+ "&eor_32 (@x[$d2],@x[$d2],@x[$a2])",
+ "&eor_32 (@x[$d3],@x[$d3],@x[$a3])",
+ "&ror_32 (@x[$d0],@x[$d0],24)",
+ "&ror_32 (@x[$d1],@x[$d1],24)",
+ "&ror_32 (@x[$d2],@x[$d2],24)",
+ "&ror_32 (@x[$d3],@x[$d3],24)",
+
+ "&add_32 (@x[$c0],@x[$c0],@x[$d0])",
+ "&add_32 (@x[$c1],@x[$c1],@x[$d1])",
+ "&add_32 (@x[$c2],@x[$c2],@x[$d2])",
+ "&add_32 (@x[$c3],@x[$c3],@x[$d3])",
+ "&eor_32 (@x[$b0],@x[$b0],@x[$c0])",
+ "&eor_32 (@x[$b1],@x[$b1],@x[$c1])",
+ "&eor_32 (@x[$b2],@x[$b2],@x[$c2])",
+ "&eor_32 (@x[$b3],@x[$b3],@x[$c3])",
+ "&ror_32 (@x[$b0],@x[$b0],25)",
+ "&ror_32 (@x[$b1],@x[$b1],25)",
+ "&ror_32 (@x[$b2],@x[$b2],25)",
+ "&ror_32 (@x[$b3],@x[$b3],25)"
+ );
+}
+
+$code.=<<___;
+#include "arm_arch.h"
+
+.text
+
+.extern OPENSSL_armcap_P
+.hidden OPENSSL_armcap_P
+
+.align 5
+.Lsigma:
+.quad 0x3320646e61707865,0x6b20657479622d32 // endian-neutral
+.Lone:
+.long 1,0,0,0
+.LOPENSSL_armcap_P:
+#ifdef __ILP32__
+.long OPENSSL_armcap_P-.
+#else
+.quad OPENSSL_armcap_P-.
+#endif
+.asciz "ChaCha20 for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+
+.globl ChaCha20_ctr32
+.type ChaCha20_ctr32,%function
+.align 5
+ChaCha20_ctr32:
+ cbz $len,.Labort
+ adr @x[0],.LOPENSSL_armcap_P
+ cmp $len,#192
+ b.lo .Lshort
+#ifdef __ILP32__
+ ldrsw @x[1],[@x[0]]
+#else
+ ldr @x[1],[@x[0]]
+#endif
+ ldr w17,[@x[1],@x[0]]
+ tst w17,#ARMV7_NEON
+ b.ne ChaCha20_neon
+
+.Lshort:
+ .inst 0xd503233f // paciasp
+ stp x29,x30,[sp,#-96]!
+ add x29,sp,#0
+
+ adr @x[0],.Lsigma
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+ sub sp,sp,#64
+
+ ldp @d[0],@d[1],[@x[0]] // load sigma
+ ldp @d[2],@d[3],[$key] // load key
+ ldp @d[4],@d[5],[$key,#16]
+ ldp @d[6],@d[7],[$ctr] // load counter
+#ifdef __ARMEB__
+ ror @d[2],@d[2],#32
+ ror @d[3],@d[3],#32
+ ror @d[4],@d[4],#32
+ ror @d[5],@d[5],#32
+ ror @d[6],@d[6],#32
+ ror @d[7],@d[7],#32
+#endif
+
+.Loop_outer:
+ mov.32 @x[0],@d[0] // unpack key block
+ lsr @x[1],@d[0],#32
+ mov.32 @x[2],@d[1]
+ lsr @x[3],@d[1],#32
+ mov.32 @x[4],@d[2]
+ lsr @x[5],@d[2],#32
+ mov.32 @x[6],@d[3]
+ lsr @x[7],@d[3],#32
+ mov.32 @x[8],@d[4]
+ lsr @x[9],@d[4],#32
+ mov.32 @x[10],@d[5]
+ lsr @x[11],@d[5],#32
+ mov.32 @x[12],@d[6]
+ lsr @x[13],@d[6],#32
+ mov.32 @x[14],@d[7]
+ lsr @x[15],@d[7],#32
+
+ mov $ctr,#10
+ subs $len,$len,#64
+.Loop:
+ sub $ctr,$ctr,#1
+___
+ foreach (&ROUND(0, 4, 8,12)) { eval; }
+ foreach (&ROUND(0, 5,10,15)) { eval; }
+$code.=<<___;
+ cbnz $ctr,.Loop
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ add @x[1],@x[1],@d[0],lsr#32
+ add.32 @x[2],@x[2],@d[1]
+ add @x[3],@x[3],@d[1],lsr#32
+ add.32 @x[4],@x[4],@d[2]
+ add @x[5],@x[5],@d[2],lsr#32
+ add.32 @x[6],@x[6],@d[3]
+ add @x[7],@x[7],@d[3],lsr#32
+ add.32 @x[8],@x[8],@d[4]
+ add @x[9],@x[9],@d[4],lsr#32
+ add.32 @x[10],@x[10],@d[5]
+ add @x[11],@x[11],@d[5],lsr#32
+ add.32 @x[12],@x[12],@d[6]
+ add @x[13],@x[13],@d[6],lsr#32
+ add.32 @x[14],@x[14],@d[7]
+ add @x[15],@x[15],@d[7],lsr#32
+
+ b.lo .Ltail
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+#ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor @x[10],@x[10],@x[11]
+ eor @x[12],@x[12],@x[13]
+ eor @x[14],@x[14],@x[15]
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#1 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ stp @x[8],@x[10],[$out,#32]
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+
+ b.hi .Loop_outer
+
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ .inst 0xd50323bf // autiasp
+.Labort:
+ ret
+
+.align 4
+.Ltail:
+ add $len,$len,#64
+.Less_than_64:
+ sub $out,$out,#1
+ add $inp,$inp,$len
+ add $out,$out,$len
+ add $ctr,sp,$len
+ neg $len,$len
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+#ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ stp @x[0],@x[2],[sp,#0]
+ stp @x[4],@x[6],[sp,#16]
+ stp @x[8],@x[10],[sp,#32]
+ stp @x[12],@x[14],[sp,#48]
+
+.Loop_tail:
+ ldrb w10,[$inp,$len]
+ ldrb w11,[$ctr,$len]
+ add $len,$len,#1
+ eor w10,w10,w11
+ strb w10,[$out,$len]
+ cbnz $len,.Loop_tail
+
+ stp xzr,xzr,[sp,#0]
+ stp xzr,xzr,[sp,#16]
+ stp xzr,xzr,[sp,#32]
+ stp xzr,xzr,[sp,#48]
+
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ .inst 0xd50323bf // autiasp
+ ret
+.size ChaCha20_ctr32,.-ChaCha20_ctr32
+___
+
+{{{
+my ($A0,$B0,$C0,$D0,$A1,$B1,$C1,$D1,$A2,$B2,$C2,$D2,$T0,$T1,$T2,$T3) =
+ map("v$_.4s",(0..7,16..23));
+my (@K)=map("v$_.4s",(24..30));
+my $ONE="v31.4s";
+
+sub NEONROUND {
+my $odd = pop;
+my ($a,$b,$c,$d,$t)=@_;
+
+ (
+ "&add ('$a','$a','$b')",
+ "&eor ('$d','$d','$a')",
+ "&rev32_16 ('$d','$d')", # vrot ($d,16)
+
+ "&add ('$c','$c','$d')",
+ "&eor ('$t','$b','$c')",
+ "&ushr ('$b','$t',20)",
+ "&sli ('$b','$t',12)",
+
+ "&add ('$a','$a','$b')",
+ "&eor ('$t','$d','$a')",
+ "&ushr ('$d','$t',24)",
+ "&sli ('$d','$t',8)",
+
+ "&add ('$c','$c','$d')",
+ "&eor ('$t','$b','$c')",
+ "&ushr ('$b','$t',25)",
+ "&sli ('$b','$t',7)",
+
+ "&ext ('$c','$c','$c',8)",
+ "&ext ('$d','$d','$d',$odd?4:12)",
+ "&ext ('$b','$b','$b',$odd?12:4)"
+ );
+}
+
+$code.=<<___;
+
+.type ChaCha20_neon,%function
+.align 5
+ChaCha20_neon:
+ .inst 0xd503233f // paciasp
+ stp x29,x30,[sp,#-96]!
+ add x29,sp,#0
+
+ adr @x[0],.Lsigma
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+ cmp $len,#512
+ b.hs .L512_or_more_neon
+
+ sub sp,sp,#64
+
+ ldp @d[0],@d[1],[@x[0]] // load sigma
+ ld1 {@K[0]},[@x[0]],#16
+ ldp @d[2],@d[3],[$key] // load key
+ ldp @d[4],@d[5],[$key,#16]
+ ld1 {@K[1],@K[2]},[$key]
+ ldp @d[6],@d[7],[$ctr] // load counter
+ ld1 {@K[3]},[$ctr]
+ ld1 {$ONE},[@x[0]]
+#ifdef __ARMEB__
+ rev64 @K[0],@K[0]
+ ror @d[2],@d[2],#32
+ ror @d[3],@d[3],#32
+ ror @d[4],@d[4],#32
+ ror @d[5],@d[5],#32
+ ror @d[6],@d[6],#32
+ ror @d[7],@d[7],#32
+#endif
+ add @K[3],@K[3],$ONE // += 1
+ add @K[4],@K[3],$ONE
+ add @K[5],@K[4],$ONE
+ shl $ONE,$ONE,#2 // 1 -> 4
+
+.Loop_outer_neon:
+ mov.32 @x[0],@d[0] // unpack key block
+ lsr @x[1],@d[0],#32
+ mov $A0,@K[0]
+ mov.32 @x[2],@d[1]
+ lsr @x[3],@d[1],#32
+ mov $A1,@K[0]
+ mov.32 @x[4],@d[2]
+ lsr @x[5],@d[2],#32
+ mov $A2,@K[0]
+ mov.32 @x[6],@d[3]
+ mov $B0,@K[1]
+ lsr @x[7],@d[3],#32
+ mov $B1,@K[1]
+ mov.32 @x[8],@d[4]
+ mov $B2,@K[1]
+ lsr @x[9],@d[4],#32
+ mov $D0,@K[3]
+ mov.32 @x[10],@d[5]
+ mov $D1,@K[4]
+ lsr @x[11],@d[5],#32
+ mov $D2,@K[5]
+ mov.32 @x[12],@d[6]
+ mov $C0,@K[2]
+ lsr @x[13],@d[6],#32
+ mov $C1,@K[2]
+ mov.32 @x[14],@d[7]
+ mov $C2,@K[2]
+ lsr @x[15],@d[7],#32
+
+ mov $ctr,#10
+ subs $len,$len,#256
+.Loop_neon:
+ sub $ctr,$ctr,#1
+___
+ my @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,0);
+ my @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,0);
+ my @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,0);
+ my @thread3=&ROUND(0,4,8,12);
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread3));
+ eval(shift(@thread1)); eval(shift(@thread3));
+ eval(shift(@thread2)); eval(shift(@thread3));
+ }
+
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,1);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,1);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,1);
+ @thread3=&ROUND(0,5,10,15);
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread3));
+ eval(shift(@thread1)); eval(shift(@thread3));
+ eval(shift(@thread2)); eval(shift(@thread3));
+ }
+$code.=<<___;
+ cbnz $ctr,.Loop_neon
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ add $A0,$A0,@K[0]
+ add @x[1],@x[1],@d[0],lsr#32
+ add $A1,$A1,@K[0]
+ add.32 @x[2],@x[2],@d[1]
+ add $A2,$A2,@K[0]
+ add @x[3],@x[3],@d[1],lsr#32
+ add $C0,$C0,@K[2]
+ add.32 @x[4],@x[4],@d[2]
+ add $C1,$C1,@K[2]
+ add @x[5],@x[5],@d[2],lsr#32
+ add $C2,$C2,@K[2]
+ add.32 @x[6],@x[6],@d[3]
+ add $D0,$D0,@K[3]
+ add @x[7],@x[7],@d[3],lsr#32
+ add.32 @x[8],@x[8],@d[4]
+ add $D1,$D1,@K[4]
+ add @x[9],@x[9],@d[4],lsr#32
+ add.32 @x[10],@x[10],@d[5]
+ add $D2,$D2,@K[5]
+ add @x[11],@x[11],@d[5],lsr#32
+ add.32 @x[12],@x[12],@d[6]
+ add $B0,$B0,@K[1]
+ add @x[13],@x[13],@d[6],lsr#32
+ add.32 @x[14],@x[14],@d[7]
+ add $B1,$B1,@K[1]
+ add @x[15],@x[15],@d[7],lsr#32
+ add $B2,$B2,@K[1]
+
+ b.lo .Ltail_neon
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+#ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor $A0,$A0,$T0
+ eor @x[10],@x[10],@x[11]
+ eor $B0,$B0,$T1
+ eor @x[12],@x[12],@x[13]
+ eor $C0,$C0,$T2
+ eor @x[14],@x[14],@x[15]
+ eor $D0,$D0,$T3
+ ld1.8 {$T0-$T3},[$inp],#64
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#4 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ add @K[3],@K[3],$ONE // += 4
+ stp @x[8],@x[10],[$out,#32]
+ add @K[4],@K[4],$ONE
+ stp @x[12],@x[14],[$out,#48]
+ add @K[5],@K[5],$ONE
+ add $out,$out,#64
+
+ st1.8 {$A0-$D0},[$out],#64
+ ld1.8 {$A0-$D0},[$inp],#64
+
+ eor $A1,$A1,$T0
+ eor $B1,$B1,$T1
+ eor $C1,$C1,$T2
+ eor $D1,$D1,$T3
+ st1.8 {$A1-$D1},[$out],#64
+
+ eor $A2,$A2,$A0
+ eor $B2,$B2,$B0
+ eor $C2,$C2,$C0
+ eor $D2,$D2,$D0
+ st1.8 {$A2-$D2},[$out],#64
+
+ b.hi .Loop_outer_neon
+
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ .inst 0xd50323bf // autiasp
+ ret
+
+.Ltail_neon:
+ add $len,$len,#256
+ cmp $len,#64
+ b.lo .Less_than_64
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+#ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor @x[10],@x[10],@x[11]
+ eor @x[12],@x[12],@x[13]
+ eor @x[14],@x[14],@x[15]
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#4 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ stp @x[8],@x[10],[$out,#32]
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+ b.eq .Ldone_neon
+ sub $len,$len,#64
+ cmp $len,#64
+ b.lo .Less_than_128
+
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor $A0,$A0,$T0
+ eor $B0,$B0,$T1
+ eor $C0,$C0,$T2
+ eor $D0,$D0,$T3
+ st1.8 {$A0-$D0},[$out],#64
+ b.eq .Ldone_neon
+ sub $len,$len,#64
+ cmp $len,#64
+ b.lo .Less_than_192
+
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor $A1,$A1,$T0
+ eor $B1,$B1,$T1
+ eor $C1,$C1,$T2
+ eor $D1,$D1,$T3
+ st1.8 {$A1-$D1},[$out],#64
+ b.eq .Ldone_neon
+ sub $len,$len,#64
+
+ st1.8 {$A2-$D2},[sp]
+ b .Last_neon
+
+.Less_than_128:
+ st1.8 {$A0-$D0},[sp]
+ b .Last_neon
+.Less_than_192:
+ st1.8 {$A1-$D1},[sp]
+ b .Last_neon
+
+.align 4
+.Last_neon:
+ sub $out,$out,#1
+ add $inp,$inp,$len
+ add $out,$out,$len
+ add $ctr,sp,$len
+ neg $len,$len
+
+.Loop_tail_neon:
+ ldrb w10,[$inp,$len]
+ ldrb w11,[$ctr,$len]
+ add $len,$len,#1
+ eor w10,w10,w11
+ strb w10,[$out,$len]
+ cbnz $len,.Loop_tail_neon
+
+ stp xzr,xzr,[sp,#0]
+ stp xzr,xzr,[sp,#16]
+ stp xzr,xzr,[sp,#32]
+ stp xzr,xzr,[sp,#48]
+
+.Ldone_neon:
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ .inst 0xd50323bf // autiasp
+ ret
+.size ChaCha20_neon,.-ChaCha20_neon
+___
+{
+my ($T0,$T1,$T2,$T3,$T4,$T5)=@K;
+my ($A0,$B0,$C0,$D0,$A1,$B1,$C1,$D1,$A2,$B2,$C2,$D2,
+ $A3,$B3,$C3,$D3,$A4,$B4,$C4,$D4,$A5,$B5,$C5,$D5) = map("v$_.4s",(0..23));
+
+$code.=<<___;
+.type ChaCha20_512_neon,%function
+.align 5
+ChaCha20_512_neon:
+ .inst 0xd503233f // paciasp
+ stp x29,x30,[sp,#-96]!
+ add x29,sp,#0
+
+ adr @x[0],.Lsigma
+ stp x19,x20,[sp,#16]
+ stp x21,x22,[sp,#32]
+ stp x23,x24,[sp,#48]
+ stp x25,x26,[sp,#64]
+ stp x27,x28,[sp,#80]
+
+.L512_or_more_neon:
+ sub sp,sp,#128+64
+
+ ldp @d[0],@d[1],[@x[0]] // load sigma
+ ld1 {@K[0]},[@x[0]],#16
+ ldp @d[2],@d[3],[$key] // load key
+ ldp @d[4],@d[5],[$key,#16]
+ ld1 {@K[1],@K[2]},[$key]
+ ldp @d[6],@d[7],[$ctr] // load counter
+ ld1 {@K[3]},[$ctr]
+ ld1 {$ONE},[@x[0]]
+#ifdef __ARMEB__
+ rev64 @K[0],@K[0]
+ ror @d[2],@d[2],#32
+ ror @d[3],@d[3],#32
+ ror @d[4],@d[4],#32
+ ror @d[5],@d[5],#32
+ ror @d[6],@d[6],#32
+ ror @d[7],@d[7],#32
+#endif
+ add @K[3],@K[3],$ONE // += 1
+ stp @K[0],@K[1],[sp,#0] // off-load key block, invariant part
+ add @K[3],@K[3],$ONE // not typo
+ str @K[2],[sp,#32]
+ add @K[4],@K[3],$ONE
+ add @K[5],@K[4],$ONE
+ add @K[6],@K[5],$ONE
+ shl $ONE,$ONE,#2 // 1 -> 4
+
+ stp d8,d9,[sp,#128+0] // meet ABI requirements
+ stp d10,d11,[sp,#128+16]
+ stp d12,d13,[sp,#128+32]
+ stp d14,d15,[sp,#128+48]
+
+ sub $len,$len,#512 // not typo
+
+.Loop_outer_512_neon:
+ mov $A0,@K[0]
+ mov $A1,@K[0]
+ mov $A2,@K[0]
+ mov $A3,@K[0]
+ mov $A4,@K[0]
+ mov $A5,@K[0]
+ mov $B0,@K[1]
+ mov.32 @x[0],@d[0] // unpack key block
+ mov $B1,@K[1]
+ lsr @x[1],@d[0],#32
+ mov $B2,@K[1]
+ mov.32 @x[2],@d[1]
+ mov $B3,@K[1]
+ lsr @x[3],@d[1],#32
+ mov $B4,@K[1]
+ mov.32 @x[4],@d[2]
+ mov $B5,@K[1]
+ lsr @x[5],@d[2],#32
+ mov $D0,@K[3]
+ mov.32 @x[6],@d[3]
+ mov $D1,@K[4]
+ lsr @x[7],@d[3],#32
+ mov $D2,@K[5]
+ mov.32 @x[8],@d[4]
+ mov $D3,@K[6]
+ lsr @x[9],@d[4],#32
+ mov $C0,@K[2]
+ mov.32 @x[10],@d[5]
+ mov $C1,@K[2]
+ lsr @x[11],@d[5],#32
+ add $D4,$D0,$ONE // +4
+ mov.32 @x[12],@d[6]
+ add $D5,$D1,$ONE // +4
+ lsr @x[13],@d[6],#32
+ mov $C2,@K[2]
+ mov.32 @x[14],@d[7]
+ mov $C3,@K[2]
+ lsr @x[15],@d[7],#32
+ mov $C4,@K[2]
+ stp @K[3],@K[4],[sp,#48] // off-load key block, variable part
+ mov $C5,@K[2]
+ str @K[5],[sp,#80]
+
+ mov $ctr,#5
+ subs $len,$len,#512
+.Loop_upper_neon:
+ sub $ctr,$ctr,#1
+___
+ my @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,0);
+ my @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,0);
+ my @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,0);
+ my @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,0);
+ my @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,0);
+ my @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,0);
+ my @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+ my $diff = ($#thread0+1)*6 - $#thread67 - 1;
+ my $i = 0;
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,1);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,1);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,1);
+ @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,1);
+ @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,1);
+ @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,1);
+ @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+$code.=<<___;
+ cbnz $ctr,.Loop_upper_neon
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ add @x[1],@x[1],@d[0],lsr#32
+ add.32 @x[2],@x[2],@d[1]
+ add @x[3],@x[3],@d[1],lsr#32
+ add.32 @x[4],@x[4],@d[2]
+ add @x[5],@x[5],@d[2],lsr#32
+ add.32 @x[6],@x[6],@d[3]
+ add @x[7],@x[7],@d[3],lsr#32
+ add.32 @x[8],@x[8],@d[4]
+ add @x[9],@x[9],@d[4],lsr#32
+ add.32 @x[10],@x[10],@d[5]
+ add @x[11],@x[11],@d[5],lsr#32
+ add.32 @x[12],@x[12],@d[6]
+ add @x[13],@x[13],@d[6],lsr#32
+ add.32 @x[14],@x[14],@d[7]
+ add @x[15],@x[15],@d[7],lsr#32
+
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add @x[2],@x[2],@x[3],lsl#32
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add @x[4],@x[4],@x[5],lsl#32
+ add @x[6],@x[6],@x[7],lsl#32
+ ldp @x[5],@x[7],[$inp,#16]
+ add @x[8],@x[8],@x[9],lsl#32
+ add @x[10],@x[10],@x[11],lsl#32
+ ldp @x[9],@x[11],[$inp,#32]
+ add @x[12],@x[12],@x[13],lsl#32
+ add @x[14],@x[14],@x[15],lsl#32
+ ldp @x[13],@x[15],[$inp,#48]
+ add $inp,$inp,#64
+#ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor @x[10],@x[10],@x[11]
+ eor @x[12],@x[12],@x[13]
+ eor @x[14],@x[14],@x[15]
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#1 // increment counter
+ mov.32 @x[0],@d[0] // unpack key block
+ lsr @x[1],@d[0],#32
+ stp @x[4],@x[6],[$out,#16]
+ mov.32 @x[2],@d[1]
+ lsr @x[3],@d[1],#32
+ stp @x[8],@x[10],[$out,#32]
+ mov.32 @x[4],@d[2]
+ lsr @x[5],@d[2],#32
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+ mov.32 @x[6],@d[3]
+ lsr @x[7],@d[3],#32
+ mov.32 @x[8],@d[4]
+ lsr @x[9],@d[4],#32
+ mov.32 @x[10],@d[5]
+ lsr @x[11],@d[5],#32
+ mov.32 @x[12],@d[6]
+ lsr @x[13],@d[6],#32
+ mov.32 @x[14],@d[7]
+ lsr @x[15],@d[7],#32
+
+ mov $ctr,#5
+.Loop_lower_neon:
+ sub $ctr,$ctr,#1
+___
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,0);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,0);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,0);
+ @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,0);
+ @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,0);
+ @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,0);
+ @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+
+ @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,1);
+ @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,1);
+ @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,1);
+ @thread3=&NEONROUND($A3,$B3,$C3,$D3,$T3,1);
+ @thread4=&NEONROUND($A4,$B4,$C4,$D4,$T4,1);
+ @thread5=&NEONROUND($A5,$B5,$C5,$D5,$T5,1);
+ @thread67=(&ROUND(0,4,8,12),&ROUND(0,5,10,15));
+
+ foreach (@thread0) {
+ eval; eval(shift(@thread67));
+ eval(shift(@thread1)); eval(shift(@thread67));
+ eval(shift(@thread2)); eval(shift(@thread67));
+ eval(shift(@thread3)); eval(shift(@thread67));
+ eval(shift(@thread4)); eval(shift(@thread67));
+ eval(shift(@thread5)); eval(shift(@thread67));
+ }
+$code.=<<___;
+ cbnz $ctr,.Loop_lower_neon
+
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ ldp @K[0],@K[1],[sp,#0]
+ add @x[1],@x[1],@d[0],lsr#32
+ ldp @K[2],@K[3],[sp,#32]
+ add.32 @x[2],@x[2],@d[1]
+ ldp @K[4],@K[5],[sp,#64]
+ add @x[3],@x[3],@d[1],lsr#32
+ add $A0,$A0,@K[0]
+ add.32 @x[4],@x[4],@d[2]
+ add $A1,$A1,@K[0]
+ add @x[5],@x[5],@d[2],lsr#32
+ add $A2,$A2,@K[0]
+ add.32 @x[6],@x[6],@d[3]
+ add $A3,$A3,@K[0]
+ add @x[7],@x[7],@d[3],lsr#32
+ add $A4,$A4,@K[0]
+ add.32 @x[8],@x[8],@d[4]
+ add $A5,$A5,@K[0]
+ add @x[9],@x[9],@d[4],lsr#32
+ add $C0,$C0,@K[2]
+ add.32 @x[10],@x[10],@d[5]
+ add $C1,$C1,@K[2]
+ add @x[11],@x[11],@d[5],lsr#32
+ add $C2,$C2,@K[2]
+ add.32 @x[12],@x[12],@d[6]
+ add $C3,$C3,@K[2]
+ add @x[13],@x[13],@d[6],lsr#32
+ add $C4,$C4,@K[2]
+ add.32 @x[14],@x[14],@d[7]
+ add $C5,$C5,@K[2]
+ add @x[15],@x[15],@d[7],lsr#32
+ add $D4,$D4,$ONE // +4
+ add @x[0],@x[0],@x[1],lsl#32 // pack
+ add $D5,$D5,$ONE // +4
+ add @x[2],@x[2],@x[3],lsl#32
+ add $D0,$D0,@K[3]
+ ldp @x[1],@x[3],[$inp,#0] // load input
+ add $D1,$D1,@K[4]
+ add @x[4],@x[4],@x[5],lsl#32
+ add $D2,$D2,@K[5]
+ add @x[6],@x[6],@x[7],lsl#32
+ add $D3,$D3,@K[6]
+ ldp @x[5],@x[7],[$inp,#16]
+ add $D4,$D4,@K[3]
+ add @x[8],@x[8],@x[9],lsl#32
+ add $D5,$D5,@K[4]
+ add @x[10],@x[10],@x[11],lsl#32
+ add $B0,$B0,@K[1]
+ ldp @x[9],@x[11],[$inp,#32]
+ add $B1,$B1,@K[1]
+ add @x[12],@x[12],@x[13],lsl#32
+ add $B2,$B2,@K[1]
+ add @x[14],@x[14],@x[15],lsl#32
+ add $B3,$B3,@K[1]
+ ldp @x[13],@x[15],[$inp,#48]
+ add $B4,$B4,@K[1]
+ add $inp,$inp,#64
+ add $B5,$B5,@K[1]
+
+#ifdef __ARMEB__
+ rev @x[0],@x[0]
+ rev @x[2],@x[2]
+ rev @x[4],@x[4]
+ rev @x[6],@x[6]
+ rev @x[8],@x[8]
+ rev @x[10],@x[10]
+ rev @x[12],@x[12]
+ rev @x[14],@x[14]
+#endif
+ ld1.8 {$T0-$T3},[$inp],#64
+ eor @x[0],@x[0],@x[1]
+ eor @x[2],@x[2],@x[3]
+ eor @x[4],@x[4],@x[5]
+ eor @x[6],@x[6],@x[7]
+ eor @x[8],@x[8],@x[9]
+ eor $A0,$A0,$T0
+ eor @x[10],@x[10],@x[11]
+ eor $B0,$B0,$T1
+ eor @x[12],@x[12],@x[13]
+ eor $C0,$C0,$T2
+ eor @x[14],@x[14],@x[15]
+ eor $D0,$D0,$T3
+ ld1.8 {$T0-$T3},[$inp],#64
+
+ stp @x[0],@x[2],[$out,#0] // store output
+ add @d[6],@d[6],#7 // increment counter
+ stp @x[4],@x[6],[$out,#16]
+ stp @x[8],@x[10],[$out,#32]
+ stp @x[12],@x[14],[$out,#48]
+ add $out,$out,#64
+ st1.8 {$A0-$D0},[$out],#64
+
+ ld1.8 {$A0-$D0},[$inp],#64
+ eor $A1,$A1,$T0
+ eor $B1,$B1,$T1
+ eor $C1,$C1,$T2
+ eor $D1,$D1,$T3
+ st1.8 {$A1-$D1},[$out],#64
+
+ ld1.8 {$A1-$D1},[$inp],#64
+ eor $A2,$A2,$A0
+ ldp @K[0],@K[1],[sp,#0]
+ eor $B2,$B2,$B0
+ ldp @K[2],@K[3],[sp,#32]
+ eor $C2,$C2,$C0
+ eor $D2,$D2,$D0
+ st1.8 {$A2-$D2},[$out],#64
+
+ ld1.8 {$A2-$D2},[$inp],#64
+ eor $A3,$A3,$A1
+ eor $B3,$B3,$B1
+ eor $C3,$C3,$C1
+ eor $D3,$D3,$D1
+ st1.8 {$A3-$D3},[$out],#64
+
+ ld1.8 {$A3-$D3},[$inp],#64
+ eor $A4,$A4,$A2
+ eor $B4,$B4,$B2
+ eor $C4,$C4,$C2
+ eor $D4,$D4,$D2
+ st1.8 {$A4-$D4},[$out],#64
+
+ shl $A0,$ONE,#1 // 4 -> 8
+ eor $A5,$A5,$A3
+ eor $B5,$B5,$B3
+ eor $C5,$C5,$C3
+ eor $D5,$D5,$D3
+ st1.8 {$A5-$D5},[$out],#64
+
+ add @K[3],@K[3],$A0 // += 8
+ add @K[4],@K[4],$A0
+ add @K[5],@K[5],$A0
+ add @K[6],@K[6],$A0
+
+ b.hs .Loop_outer_512_neon
+
+ adds $len,$len,#512
+ ushr $A0,$ONE,#2 // 4 -> 1
+
+ ldp d8,d9,[sp,#128+0] // meet ABI requirements
+ ldp d10,d11,[sp,#128+16]
+ ldp d12,d13,[sp,#128+32]
+ ldp d14,d15,[sp,#128+48]
+
+ stp @K[0],$ONE,[sp,#0] // wipe off-load area
+ stp @K[0],$ONE,[sp,#32]
+ stp @K[0],$ONE,[sp,#64]
+
+ b.eq .Ldone_512_neon
+
+ cmp $len,#192
+ sub @K[3],@K[3],$A0 // -= 1
+ sub @K[4],@K[4],$A0
+ sub @K[5],@K[5],$A0
+ add sp,sp,#128
+ b.hs .Loop_outer_neon
+
+ eor @K[1],@K[1],@K[1]
+ eor @K[2],@K[2],@K[2]
+ eor @K[3],@K[3],@K[3]
+ eor @K[4],@K[4],@K[4]
+ eor @K[5],@K[5],@K[5]
+ eor @K[6],@K[6],@K[6]
+ b .Loop_outer
+
+.Ldone_512_neon:
+ ldp x19,x20,[x29,#16]
+ add sp,sp,#128+64
+ ldp x21,x22,[x29,#32]
+ ldp x23,x24,[x29,#48]
+ ldp x25,x26,[x29,#64]
+ ldp x27,x28,[x29,#80]
+ ldp x29,x30,[sp],#96
+ .inst 0xd50323bf // autiasp
+ ret
+.size ChaCha20_512_neon,.-ChaCha20_512_neon
+___
+}
+}}}
+
+foreach (split("\n",$code)) {
+ s/\`([^\`]*)\`/eval $1/geo;
+
+ (s/\b([a-z]+)\.32\b/$1/ and (s/x([0-9]+)/w$1/g or 1)) or
+ (m/\b(eor|ext|mov)\b/ and (s/\.4s/\.16b/g or 1)) or
+ (s/\b((?:ld|st)1)\.8\b/$1/ and (s/\.4s/\.16b/g or 1)) or
+ (m/\b(ld|st)[rp]\b/ and (s/v([0-9]+)\.4s/q$1/g or 1)) or
+ (s/\brev32\.16\b/rev32/ and (s/\.4s/\.8h/g or 1));
+
+ #s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo;
+
+ print $_,"\n";
+}
+close STDOUT or die "error closing STDOUT: $!"; # flush