diff --git a/ap/lib/libssl/openssl-1.1.1o/doc/man5/config.pod b/ap/lib/libssl/openssl-1.1.1o/doc/man5/config.pod
new file mode 100644
index 0000000..3cc2d73
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/doc/man5/config.pod
@@ -0,0 +1,455 @@
+=pod
+
+=head1 NAME
+
+config - OpenSSL CONF library configuration files
+
+=head1 DESCRIPTION
+
+The OpenSSL CONF library can be used to read configuration files.
+It is used for the OpenSSL master configuration file B<openssl.cnf>
+and in a few other places like B<SPKAC> files and certificate extension
+files for the B<x509> utility. OpenSSL applications can also use the
+CONF library for their own purposes.
+
+A configuration file is divided into a number of sections. Each section
+starts with a line B<[ section_name ]> and ends when a new section is
+started or end of file is reached. A section name can consist of
+alphanumeric characters and underscores.
+
+The first section of a configuration file is special and is referred
+to as the B<default> section. This section is usually unnamed and spans from the
+start of file until the first named section. When a name is being looked up
+it is first looked up in a named section (if any) and then the
+default section.
+
+The environment is mapped onto a section called B<ENV>.
+
+Comments can be included by preceding them with the B<#> character
+
+Other files can be included using the B<.include> directive followed
+by a path. If the path points to a directory all files with
+names ending with B<.cnf> or B<.conf> are included from the directory.
+Recursive inclusion of directories from files in such directory is not
+supported. That means the files in the included directory can also contain
+B<.include> directives but only inclusion of regular files is supported
+there. The inclusion of directories is not supported on systems without
+POSIX IO support.
+
+It is strongly recommended to use absolute paths with the B<.include>
+directive. Relative paths are evaluated based on the application current
+working directory so unless the configuration file containing the
+B<.include> directive is application specific the inclusion will not
+work as expected.
+
+There can be optional B<=> character and whitespace characters between
+B<.include> directive and the path which can be useful in cases the
+configuration file needs to be loaded by old OpenSSL versions which do
+not support the B<.include> syntax. They would bail out with error
+if the B<=> character is not present but with it they just ignore
+the include.
+
+Each section in a configuration file consists of a number of name and
+value pairs of the form B<name=value>
+
+The B<name> string can contain any alphanumeric characters as well as
+a few punctuation symbols such as B<.> B<,> B<;> and B<_>.
+
+The B<value> string consists of the string following the B<=> character
+until end of line with any leading and trailing white space removed.
+
+The value string undergoes variable expansion. This can be done by
+including the form B<$var> or B<${var}>: this will substitute the value
+of the named variable in the current section. It is also possible to
+substitute a value from another section using the syntax B<$section::name>
+or B<${section::name}>. By using the form B<$ENV::name> environment
+variables can be substituted. It is also possible to assign values to
+environment variables by using the name B<ENV::name>, this will work
+if the program looks up environment variables using the B<CONF> library
+instead of calling getenv() directly. The value string must not exceed 64k in
+length after variable expansion. Otherwise an error will occur.
+
+It is possible to escape certain characters by using any kind of quote
+or the B<\> character. By making the last character of a line a B<\>
+a B<value> string can be spread across multiple lines. In addition
+the sequences B<\n>, B<\r>, B<\b> and B<\t> are recognized.
+
+All expansion and escape rules as described above that apply to B<value>
+also apply to the path of the B<.include> directive.
+
+=head1 OPENSSL LIBRARY CONFIGURATION
+
+Applications can automatically configure certain
+aspects of OpenSSL using the master OpenSSL configuration file, or optionally
+an alternative configuration file. The B<openssl> utility includes this
+functionality: any sub command uses the master OpenSSL configuration file
+unless an option is used in the sub command to use an alternative configuration
+file.
+
+To enable library configuration the default section needs to contain an
+appropriate line which points to the main configuration section. The default
+name is B<openssl_conf> which is used by the B<openssl> utility. Other
+applications may use an alternative name such as B<myapplication_conf>.
+All library configuration lines appear in the default section at the start
+of the configuration file.
+
+The configuration section should consist of a set of name value pairs which
+contain specific module configuration information. The B<name> represents
+the name of the I<configuration module>. The meaning of the B<value> is
+module specific: it may, for example, represent a further configuration
+section containing configuration module specific information. E.g.:
+
+ # This must be in the default section
+ openssl_conf = openssl_init
+
+ [openssl_init]
+
+ oid_section = new_oids
+ engines = engine_section
+
+ [new_oids]
+
+ ... new oids here ...
+
+ [engine_section]
+
+ ... engine stuff here ...
+
+The features of each configuration module are described below.
+
+=head2 ASN1 Object Configuration Module
+
+This module has the name B<oid_section>. The value of this variable points
+to a section containing name value pairs of OIDs: the name is the OID short
+and long name, the value is the numerical form of the OID. Although some of
+the B<openssl> utility sub commands already have their own ASN1 OBJECT section
+functionality not all do. By using the ASN1 OBJECT configuration module
+B<all> the B<openssl> utility sub commands can see the new objects as well
+as any compliant applications. For example:
+
+ [new_oids]
+
+ some_new_oid = 1.2.3.4
+ some_other_oid = 1.2.3.5
+
+It is also possible to set the value to the long name followed
+by a comma and the numerical OID form. For example:
+
+ shortName = some object long name, 1.2.3.4
+
+=head2 Engine Configuration Module
+
+This ENGINE configuration module has the name B<engines>. The value of this
+variable points to a section containing further ENGINE configuration
+information.
+
+The section pointed to by B<engines> is a table of engine names (though see
+B<engine_id> below) and further sections containing configuration information
+specific to each ENGINE.
+
+Each ENGINE specific section is used to set default algorithms, load
+dynamic, perform initialization and send ctrls. The actual operation performed
+depends on the I<command> name which is the name of the name value pair. The
+currently supported commands are listed below.
+
+For example:
+
+ [engine_section]
+
+ # Configure ENGINE named "foo"
+ foo = foo_section
+ # Configure ENGINE named "bar"
+ bar = bar_section
+
+ [foo_section]
+ ... foo ENGINE specific commands ...
+
+ [bar_section]
+ ... "bar" ENGINE specific commands ...
+
+The command B<engine_id> is used to give the ENGINE name. If used this
+command must be first. For example:
+
+ [engine_section]
+ # This would normally handle an ENGINE named "foo"
+ foo = foo_section
+
+ [foo_section]
+ # Override default name and use "myfoo" instead.
+ engine_id = myfoo
+
+The command B<dynamic_path> loads and adds an ENGINE from the given path. It
+is equivalent to sending the ctrls B<SO_PATH> with the path argument followed
+by B<LIST_ADD> with value 2 and B<LOAD> to the dynamic ENGINE. If this is
+not the required behaviour then alternative ctrls can be sent directly
+to the dynamic ENGINE using ctrl commands.
+
+The command B<init> determines whether to initialize the ENGINE. If the value
+is B<0> the ENGINE will not be initialized, if B<1> and attempt it made to
+initialized the ENGINE immediately. If the B<init> command is not present
+then an attempt will be made to initialize the ENGINE after all commands in
+its section have been processed.
+
+The command B<default_algorithms> sets the default algorithms an ENGINE will
+supply using the functions ENGINE_set_default_string().
+
+If the name matches none of the above command names it is assumed to be a
+ctrl command which is sent to the ENGINE. The value of the command is the
+argument to the ctrl command. If the value is the string B<EMPTY> then no
+value is sent to the command.
+
+For example:
+
+
+ [engine_section]
+
+ # Configure ENGINE named "foo"
+ foo = foo_section
+
+ [foo_section]
+ # Load engine from DSO
+ dynamic_path = /some/path/fooengine.so
+ # A foo specific ctrl.
+ some_ctrl = some_value
+ # Another ctrl that doesn't take a value.
+ other_ctrl = EMPTY
+ # Supply all default algorithms
+ default_algorithms = ALL
+
+=head2 EVP Configuration Module
+
+This modules has the name B<alg_section> which points to a section containing
+algorithm commands.
+
+Currently the only algorithm command supported is B<fips_mode> whose
+value can only be the boolean string B<off>. If B<fips_mode> is set to B<on>,
+an error occurs as this library version is not FIPS capable.
+
+=head2 SSL Configuration Module
+
+This module has the name B<ssl_conf> which points to a section containing
+SSL configurations.
+
+Each line in the SSL configuration section contains the name of the
+configuration and the section containing it.
+
+Each configuration section consists of command value pairs for B<SSL_CONF>.
+Each pair will be passed to a B<SSL_CTX> or B<SSL> structure if it calls
+SSL_CTX_config() or SSL_config() with the appropriate configuration name.
+
+Note: any characters before an initial dot in the configuration section are
+ignored so the same command can be used multiple times.
+
+For example:
+
+ ssl_conf = ssl_sect
+
+ [ssl_sect]
+
+ server = server_section
+
+ [server_section]
+
+ RSA.Certificate = server-rsa.pem
+ ECDSA.Certificate = server-ecdsa.pem
+ Ciphers = ALL:!RC4
+
+The system default configuration with name B<system_default> if present will
+be applied during any creation of the B<SSL_CTX> structure.
+
+Example of a configuration with the system default:
+
+ ssl_conf = ssl_sect
+
+ [ssl_sect]
+ system_default = system_default_sect
+
+ [system_default_sect]
+ MinProtocol = TLSv1.2
+ MinProtocol = DTLSv1.2
+
+=head1 NOTES
+
+If a configuration file attempts to expand a variable that doesn't exist
+then an error is flagged and the file will not load. This can happen
+if an attempt is made to expand an environment variable that doesn't
+exist. For example in a previous version of OpenSSL the default OpenSSL
+master configuration file used the value of B<HOME> which may not be
+defined on non Unix systems and would cause an error.
+
+This can be worked around by including a B<default> section to provide
+a default value: then if the environment lookup fails the default value
+will be used instead. For this to work properly the default value must
+be defined earlier in the configuration file than the expansion. See
+the B<EXAMPLES> section for an example of how to do this.
+
+If the same variable exists in the same section then all but the last
+value will be silently ignored. In certain circumstances such as with
+DNs the same field may occur multiple times. This is usually worked
+around by ignoring any characters before an initial B<.> e.g.
+
+ 1.OU="My first OU"
+ 2.OU="My Second OU"
+
+=head1 EXAMPLES
+
+Here is a sample configuration file using some of the features
+mentioned above.
+
+ # This is the default section.
+
+ HOME=/temp
+ RANDFILE= ${ENV::HOME}/.rnd
+ configdir=$ENV::HOME/config
+
+ [ section_one ]
+
+ # We are now in section one.
+
+ # Quotes permit leading and trailing whitespace
+ any = " any variable name "
+
+ other = A string that can \
+ cover several lines \
+ by including \\ characters
+
+ message = Hello World\n
+
+ [ section_two ]
+
+ greeting = $section_one::message
+
+This next example shows how to expand environment variables safely.
+
+Suppose you want a variable called B<tmpfile> to refer to a
+temporary filename. The directory it is placed in can determined by
+the B<TEMP> or B<TMP> environment variables but they may not be
+set to any value at all. If you just include the environment variable
+names and the variable doesn't exist then this will cause an error when
+an attempt is made to load the configuration file. By making use of the
+default section both values can be looked up with B<TEMP> taking
+priority and B</tmp> used if neither is defined:
+
+ TMP=/tmp
+ # The above value is used if TMP isn't in the environment
+ TEMP=$ENV::TMP
+ # The above value is used if TEMP isn't in the environment
+ tmpfile=${ENV::TEMP}/tmp.filename
+
+Simple OpenSSL library configuration example to enter FIPS mode:
+
+ # Default appname: should match "appname" parameter (if any)
+ # supplied to CONF_modules_load_file et al.
+ openssl_conf = openssl_conf_section
+
+ [openssl_conf_section]
+ # Configuration module list
+ alg_section = evp_sect
+
+ [evp_sect]
+ # Set to "yes" to enter FIPS mode if supported
+ fips_mode = yes
+
+Note: in the above example you will get an error in non FIPS capable versions
+of OpenSSL.
+
+Simple OpenSSL library configuration to make TLS 1.2 and DTLS 1.2 the
+system-default minimum TLS and DTLS versions, respectively:
+
+ # Toplevel section for openssl (including libssl)
+ openssl_conf = default_conf_section
+
+ [default_conf_section]
+ # We only specify configuration for the "ssl module"
+ ssl_conf = ssl_section
+
+ [ssl_section]
+ system_default = system_default_section
+
+ [system_default_section]
+ MinProtocol = TLSv1.2
+ MinProtocol = DTLSv1.2
+
+The minimum TLS protocol is applied to B<SSL_CTX> objects that are TLS-based,
+and the minimum DTLS protocol to those are DTLS-based.
+The same applies also to maximum versions set with B<MaxProtocol>.
+
+More complex OpenSSL library configuration. Add OID and don't enter FIPS mode:
+
+ # Default appname: should match "appname" parameter (if any)
+ # supplied to CONF_modules_load_file et al.
+ openssl_conf = openssl_conf_section
+
+ [openssl_conf_section]
+ # Configuration module list
+ alg_section = evp_sect
+ oid_section = new_oids
+
+ [evp_sect]
+ # This will have no effect as FIPS mode is off by default.
+ # Set to "yes" to enter FIPS mode, if supported
+ fips_mode = no
+
+ [new_oids]
+ # New OID, just short name
+ newoid1 = 1.2.3.4.1
+ # New OID shortname and long name
+ newoid2 = New OID 2 long name, 1.2.3.4.2
+
+The above examples can be used with any application supporting library
+configuration if "openssl_conf" is modified to match the appropriate "appname".
+
+For example if the second sample file above is saved to "example.cnf" then
+the command line:
+
+ OPENSSL_CONF=example.cnf openssl asn1parse -genstr OID:1.2.3.4.1
+
+will output:
+
+    0:d=0  hl=2 l=   4 prim: OBJECT            :newoid1
+
+showing that the OID "newoid1" has been added as "1.2.3.4.1".
+
+=head1 ENVIRONMENT
+
+=over 4
+
+=item B<OPENSSL_CONF>
+
+The path to the config file.
+Ignored in set-user-ID and set-group-ID programs.
+
+=item B<OPENSSL_ENGINES>
+
+The path to the engines directory.
+Ignored in set-user-ID and set-group-ID programs.
+
+=back
+
+=head1 BUGS
+
+Currently there is no way to include characters using the octal B<\nnn>
+form. Strings are all null terminated so nulls cannot form part of
+the value.
+
+The escaping isn't quite right: if you want to use sequences like B<\n>
+you can't use any quote escaping on the same line.
+
+Files are loaded in a single pass. This means that a variable expansion
+will only work if the variables referenced are defined earlier in the
+file.
+
+=head1 SEE ALSO
+
+L<x509(1)>, L<req(1)>, L<ca(1)>
+
+=head1 COPYRIGHT
+
+Copyright 2000-2020 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License").  You may not use
+this file except in compliance with the License.  You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut
diff --git a/ap/lib/libssl/openssl-1.1.1o/doc/man5/x509v3_config.pod b/ap/lib/libssl/openssl-1.1.1o/doc/man5/x509v3_config.pod
new file mode 100644
index 0000000..5c0caa5
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/doc/man5/x509v3_config.pod
@@ -0,0 +1,544 @@
+=pod
+
+=head1 NAME
+
+x509v3_config - X509 V3 certificate extension configuration format
+
+=head1 DESCRIPTION
+
+Several of the OpenSSL utilities can add extensions to a certificate or
+certificate request based on the contents of a configuration file.
+
+Typically the application will contain an option to point to an extension
+section. Each line of the extension section takes the form:
+
+ extension_name=[critical,] extension_options
+
+If B<critical> is present then the extension will be critical.
+
+The format of B<extension_options> depends on the value of B<extension_name>.
+
+There are four main types of extension: I<string> extensions, I<multi-valued>
+extensions, I<raw> and I<arbitrary> extensions.
+
+String extensions simply have a string which contains either the value itself
+or how it is obtained.
+
+For example:
+
+ nsComment="This is a Comment"
+
+Multi-valued extensions have a short form and a long form. The short form
+is a list of names and values:
+
+ basicConstraints=critical,CA:true,pathlen:1
+
+The long form allows the values to be placed in a separate section:
+
+ basicConstraints=critical,@bs_section
+
+ [bs_section]
+
+ CA=true
+ pathlen=1
+
+Both forms are equivalent.
+
+The syntax of raw extensions is governed by the extension code: it can
+for example contain data in multiple sections. The correct syntax to
+use is defined by the extension code itself: check out the certificate
+policies extension for an example.
+
+If an extension type is unsupported then the I<arbitrary> extension syntax
+must be used, see the L<ARBITRARY EXTENSIONS|/"ARBITRARY EXTENSIONS"> section for more details.
+
+=head1 STANDARD EXTENSIONS
+
+The following sections describe each supported extension in detail.
+
+=head2 Basic Constraints.
+
+This is a multi valued extension which indicates whether a certificate is
+a CA certificate. The first (mandatory) name is B<CA> followed by B<TRUE> or
+B<FALSE>. If B<CA> is B<TRUE> then an optional B<pathlen> name followed by a
+nonnegative value can be included.
+
+For example:
+
+ basicConstraints=CA:TRUE
+
+ basicConstraints=CA:FALSE
+
+ basicConstraints=critical,CA:TRUE, pathlen:0
+
+A CA certificate B<must> include the basicConstraints value with the CA field
+set to TRUE. An end user certificate must either set CA to FALSE or exclude the
+extension entirely. Some software may require the inclusion of basicConstraints
+with CA set to FALSE for end entity certificates.
+
+The pathlen parameter indicates the maximum number of CAs that can appear
+below this one in a chain. So if you have a CA with a pathlen of zero it can
+only be used to sign end user certificates and not further CAs.
+
+
+=head2 Key Usage.
+
+Key usage is a multi valued extension consisting of a list of names of the
+permitted key usages.
+
+The supported names are: digitalSignature, nonRepudiation, keyEncipherment,
+dataEncipherment, keyAgreement, keyCertSign, cRLSign, encipherOnly
+and decipherOnly.
+
+Examples:
+
+ keyUsage=digitalSignature, nonRepudiation
+
+ keyUsage=critical, keyCertSign
+
+
+=head2 Extended Key Usage.
+
+This extensions consists of a list of usages indicating purposes for which
+the certificate public key can be used for,
+
+These can either be object short names or the dotted numerical form of OIDs.
+While any OID can be used only certain values make sense. In particular the
+following PKIX, NS and MS values are meaningful:
+
+ Value                  Meaning
+ -----                  -------
+ serverAuth             SSL/TLS Web Server Authentication.
+ clientAuth             SSL/TLS Web Client Authentication.
+ codeSigning            Code signing.
+ emailProtection        E-mail Protection (S/MIME).
+ timeStamping           Trusted Timestamping
+ OCSPSigning            OCSP Signing
+ ipsecIKE               ipsec Internet Key Exchange
+ msCodeInd              Microsoft Individual Code Signing (authenticode)
+ msCodeCom              Microsoft Commercial Code Signing (authenticode)
+ msCTLSign              Microsoft Trust List Signing
+ msEFS                  Microsoft Encrypted File System
+
+Examples:
+
+ extendedKeyUsage=critical,codeSigning,1.2.3.4
+ extendedKeyUsage=serverAuth,clientAuth
+
+
+=head2 Subject Key Identifier.
+
+This is really a string extension and can take two possible values. Either
+the word B<hash> which will automatically follow the guidelines in RFC3280
+or a hex string giving the extension value to include. The use of the hex
+string is strongly discouraged.
+
+Example:
+
+ subjectKeyIdentifier=hash
+
+
+=head2 Authority Key Identifier.
+
+The authority key identifier extension permits two options. keyid and issuer:
+both can take the optional value "always".
+
+If the keyid option is present an attempt is made to copy the subject key
+identifier from the parent certificate. If the value "always" is present
+then an error is returned if the option fails.
+
+The issuer option copies the issuer and serial number from the issuer
+certificate. This will only be done if the keyid option fails or
+is not included unless the "always" flag will always include the value.
+
+Example:
+
+ authorityKeyIdentifier=keyid,issuer
+
+
+=head2 Subject Alternative Name.
+
+The subject alternative name extension allows various literal values to be
+included in the configuration file. These include B<email> (an email address)
+B<URI> a uniform resource indicator, B<DNS> (a DNS domain name), B<RID> (a
+registered ID: OBJECT IDENTIFIER), B<IP> (an IP address), B<dirName>
+(a distinguished name) and otherName.
+
+The email option include a special 'copy' value. This will automatically
+include any email addresses contained in the certificate subject name in
+the extension.
+
+The IP address used in the B<IP> options can be in either IPv4 or IPv6 format.
+
+The value of B<dirName> should point to a section containing the distinguished
+name to use as a set of name value pairs. Multi values AVAs can be formed by
+prefacing the name with a B<+> character.
+
+otherName can include arbitrary data associated with an OID: the value
+should be the OID followed by a semicolon and the content in standard
+L<ASN1_generate_nconf(3)> format.
+
+Examples:
+
+ subjectAltName=email:copy,email:my@other.address,URI:http://my.url.here/
+ subjectAltName=IP:192.168.7.1
+ subjectAltName=IP:13::17
+ subjectAltName=email:my@other.address,RID:1.2.3.4
+ subjectAltName=otherName:1.2.3.4;UTF8:some other identifier
+
+ subjectAltName=dirName:dir_sect
+
+ [dir_sect]
+ C=UK
+ O=My Organization
+ OU=My Unit
+ CN=My Name
+
+
+=head2 Issuer Alternative Name.
+
+The issuer alternative name option supports all the literal options of
+subject alternative name. It does B<not> support the email:copy option because
+that would not make sense. It does support an additional issuer:copy option
+that will copy all the subject alternative name values from the issuer
+certificate (if possible).
+
+Example:
+
+ issuerAltName = issuer:copy
+
+
+=head2 Authority Info Access.
+
+The authority information access extension gives details about how to access
+certain information relating to the CA. Its syntax is accessOID;location
+where I<location> has the same syntax as subject alternative name (except
+that email:copy is not supported). accessOID can be any valid OID but only
+certain values are meaningful, for example OCSP and caIssuers.
+
+Example:
+
+ authorityInfoAccess = OCSP;URI:http://ocsp.my.host/
+ authorityInfoAccess = caIssuers;URI:http://my.ca/ca.html
+
+
+=head2 CRL distribution points
+
+This is a multi-valued extension whose options can be either in name:value pair
+using the same form as subject alternative name or a single value representing
+a section name containing all the distribution point fields.
+
+For a name:value pair a new DistributionPoint with the fullName field set to
+the given value both the cRLissuer and reasons fields are omitted in this case.
+
+In the single option case the section indicated contains values for each
+field. In this section:
+
+If the name is "fullname" the value field should contain the full name
+of the distribution point in the same format as subject alternative name.
+
+If the name is "relativename" then the value field should contain a section
+name whose contents represent a DN fragment to be placed in this field.
+
+The name "CRLIssuer" if present should contain a value for this field in
+subject alternative name format.
+
+If the name is "reasons" the value field should consist of a comma
+separated field containing the reasons. Valid reasons are: "keyCompromise",
+"CACompromise", "affiliationChanged", "superseded", "cessationOfOperation",
+"certificateHold", "privilegeWithdrawn" and "AACompromise".
+
+
+Simple examples:
+
+ crlDistributionPoints=URI:http://myhost.com/myca.crl
+ crlDistributionPoints=URI:http://my.com/my.crl,URI:http://oth.com/my.crl
+
+Full distribution point example:
+
+ crlDistributionPoints=crldp1_section
+
+ [crldp1_section]
+
+ fullname=URI:http://myhost.com/myca.crl
+ CRLissuer=dirName:issuer_sect
+ reasons=keyCompromise, CACompromise
+
+ [issuer_sect]
+ C=UK
+ O=Organisation
+ CN=Some Name
+
+=head2 Issuing Distribution Point
+
+This extension should only appear in CRLs. It is a multi valued extension
+whose syntax is similar to the "section" pointed to by the CRL distribution
+points extension with a few differences.
+
+The names "reasons" and "CRLissuer" are not recognized.
+
+The name "onlysomereasons" is accepted which sets this field. The value is
+in the same format as the CRL distribution point "reasons" field.
+
+The names "onlyuser", "onlyCA", "onlyAA" and "indirectCRL" are also accepted
+the values should be a boolean value (TRUE or FALSE) to indicate the value of
+the corresponding field.
+
+Example:
+
+ issuingDistributionPoint=critical, @idp_section
+
+ [idp_section]
+
+ fullname=URI:http://myhost.com/myca.crl
+ indirectCRL=TRUE
+ onlysomereasons=keyCompromise, CACompromise
+
+ [issuer_sect]
+ C=UK
+ O=Organisation
+ CN=Some Name
+
+
+=head2 Certificate Policies.
+
+This is a I<raw> extension. All the fields of this extension can be set by
+using the appropriate syntax.
+
+If you follow the PKIX recommendations and just using one OID then you just
+include the value of that OID. Multiple OIDs can be set separated by commas,
+for example:
+
+ certificatePolicies= 1.2.4.5, 1.1.3.4
+
+If you wish to include qualifiers then the policy OID and qualifiers need to
+be specified in a separate section: this is done by using the @section syntax
+instead of a literal OID value.
+
+The section referred to must include the policy OID using the name
+policyIdentifier, cPSuri qualifiers can be included using the syntax:
+
+ CPS.nnn=value
+
+userNotice qualifiers can be set using the syntax:
+
+ userNotice.nnn=@notice
+
+The value of the userNotice qualifier is specified in the relevant section.
+This section can include explicitText, organization and noticeNumbers
+options. explicitText and organization are text strings, noticeNumbers is a
+comma separated list of numbers. The organization and noticeNumbers options
+(if included) must BOTH be present. If you use the userNotice option with IE5
+then you need the 'ia5org' option at the top level to modify the encoding:
+otherwise it will not be interpreted properly.
+
+Example:
+
+ certificatePolicies=ia5org,1.2.3.4,1.5.6.7.8,@polsect
+
+ [polsect]
+
+ policyIdentifier = 1.3.5.8
+ CPS.1="http://my.host.name/"
+ CPS.2="http://my.your.name/"
+ userNotice.1=@notice
+
+ [notice]
+
+ explicitText="Explicit Text Here"
+ organization="Organisation Name"
+ noticeNumbers=1,2,3,4
+
+The B<ia5org> option changes the type of the I<organization> field. In RFC2459
+it can only be of type DisplayText. In RFC3280 IA5String is also permissible.
+Some software (for example some versions of MSIE) may require ia5org.
+
+ASN1 type of explicitText can be specified by prepending B<UTF8>,
+B<BMP> or B<VISIBLE> prefix followed by colon. For example:
+
+ [notice]
+ explicitText="UTF8:Explicit Text Here"
+
+=head2 Policy Constraints
+
+This is a multi-valued extension which consisting of the names
+B<requireExplicitPolicy> or B<inhibitPolicyMapping> and a non negative integer
+value. At least one component must be present.
+
+Example:
+
+ policyConstraints = requireExplicitPolicy:3
+
+
+=head2 Inhibit Any Policy
+
+This is a string extension whose value must be a non negative integer.
+
+Example:
+
+ inhibitAnyPolicy = 2
+
+
+=head2 Name Constraints
+
+The name constraints extension is a multi-valued extension. The name should
+begin with the word B<permitted> or B<excluded> followed by a B<;>. The rest of
+the name and the value follows the syntax of subjectAltName except email:copy
+is not supported and the B<IP> form should consist of an IP addresses and
+subnet mask separated by a B</>.
+
+Examples:
+
+ nameConstraints=permitted;IP:192.168.0.0/255.255.0.0
+
+ nameConstraints=permitted;email:.somedomain.com
+
+ nameConstraints=excluded;email:.com
+
+
+=head2 OCSP No Check
+
+The OCSP No Check extension is a string extension but its value is ignored.
+
+Example:
+
+ noCheck = ignored
+
+
+=head2 TLS Feature (aka Must Staple)
+
+This is a multi-valued extension consisting of a list of TLS extension
+identifiers. Each identifier may be a number (0..65535) or a supported name.
+When a TLS client sends a listed extension, the TLS server is expected to
+include that extension in its reply.
+
+The supported names are: B<status_request> and B<status_request_v2>.
+
+Example:
+
+ tlsfeature = status_request
+
+
+=head1 DEPRECATED EXTENSIONS
+
+The following extensions are non standard, Netscape specific and largely
+obsolete. Their use in new applications is discouraged.
+
+=head2 Netscape String extensions.
+
+Netscape Comment (B<nsComment>) is a string extension containing a comment
+which will be displayed when the certificate is viewed in some browsers.
+
+Example:
+
+ nsComment = "Some Random Comment"
+
+Other supported extensions in this category are: B<nsBaseUrl>,
+B<nsRevocationUrl>, B<nsCaRevocationUrl>, B<nsRenewalUrl>, B<nsCaPolicyUrl>
+and B<nsSslServerName>.
+
+
+=head2 Netscape Certificate Type
+
+This is a multi-valued extensions which consists of a list of flags to be
+included. It was used to indicate the purposes for which a certificate could
+be used. The basicConstraints, keyUsage and extended key usage extensions are
+now used instead.
+
+Acceptable values for nsCertType are: B<client>, B<server>, B<email>,
+B<objsign>, B<reserved>, B<sslCA>, B<emailCA>, B<objCA>.
+
+
+=head1 ARBITRARY EXTENSIONS
+
+If an extension is not supported by the OpenSSL code then it must be encoded
+using the arbitrary extension format. It is also possible to use the arbitrary
+format for supported extensions. Extreme care should be taken to ensure that
+the data is formatted correctly for the given extension type.
+
+There are two ways to encode arbitrary extensions.
+
+The first way is to use the word ASN1 followed by the extension content
+using the same syntax as L<ASN1_generate_nconf(3)>.
+For example:
+
+ 1.2.3.4=critical,ASN1:UTF8String:Some random data
+
+ 1.2.3.4=ASN1:SEQUENCE:seq_sect
+
+ [seq_sect]
+
+ field1 = UTF8:field1
+ field2 = UTF8:field2
+
+It is also possible to use the word DER to include the raw encoded data in any
+extension.
+
+ 1.2.3.4=critical,DER:01:02:03:04
+ 1.2.3.4=DER:01020304
+
+The value following DER is a hex dump of the DER encoding of the extension
+Any extension can be placed in this form to override the default behaviour.
+For example:
+
+ basicConstraints=critical,DER:00:01:02:03
+
+=head1 WARNINGS
+
+There is no guarantee that a specific implementation will process a given
+extension. It may therefore be sometimes possible to use certificates for
+purposes prohibited by their extensions because a specific application does
+not recognize or honour the values of the relevant extensions.
+
+The DER and ASN1 options should be used with caution. It is possible to create
+totally invalid extensions if they are not used carefully.
+
+=head1 NOTES
+
+If an extension is multi-value and a field value must contain a comma the long
+form must be used otherwise the comma would be misinterpreted as a field
+separator. For example:
+
+ subjectAltName=URI:ldap://somehost.com/CN=foo,OU=bar
+
+will produce an error but the equivalent form:
+
+ subjectAltName=@subject_alt_section
+
+ [subject_alt_section]
+ subjectAltName=URI:ldap://somehost.com/CN=foo,OU=bar
+
+is valid.
+
+Due to the behaviour of the OpenSSL B<conf> library the same field name
+can only occur once in a section. This means that:
+
+ subjectAltName=@alt_section
+
+ [alt_section]
+
+ email=steve@here
+ email=steve@there
+
+will only recognize the last value. This can be worked around by using the form:
+
+ [alt_section]
+
+ email.1=steve@here
+ email.2=steve@there
+
+=head1 SEE ALSO
+
+L<req(1)>, L<ca(1)>, L<x509(1)>,
+L<ASN1_generate_nconf(3)>
+
+=head1 COPYRIGHT
+
+Copyright 2004-2020 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License").  You may not use
+this file except in compliance with the License.  You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut