diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Glob.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Glob.pm
new file mode 100644
index 0000000..ec87da4
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Glob.pm
@@ -0,0 +1,21 @@
+package OpenSSL::Glob;
+
+use strict;
+use warnings;
+
+use File::Glob;
+
+use Exporter;
+use vars qw($VERSION @ISA @EXPORT);
+
+$VERSION = '0.1';
+@ISA = qw(Exporter);
+@EXPORT = qw(glob);
+
+sub glob {
+    goto &File::Glob::bsd_glob if $^O ne "VMS";
+    goto &CORE::glob;
+}
+
+1;
+__END__
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test.pm
new file mode 100644
index 0000000..0df6ad0
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test.pm
@@ -0,0 +1,1217 @@
+# Copyright 2016-2020 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+package OpenSSL::Test;
+
+use strict;
+use warnings;
+
+use Test::More 0.96;
+
+use Exporter;
+use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS);
+$VERSION = "0.8";
+@ISA = qw(Exporter);
+@EXPORT = (@Test::More::EXPORT, qw(setup run indir cmd app fuzz test
+                                   perlapp perltest subtest));
+@EXPORT_OK = (@Test::More::EXPORT_OK, qw(bldtop_dir bldtop_file
+                                         srctop_dir srctop_file
+                                         data_file data_dir
+                                         pipe with cmdstr quotify
+                                         openssl_versions));
+
+=head1 NAME
+
+OpenSSL::Test - a private extension of Test::More
+
+=head1 SYNOPSIS
+
+  use OpenSSL::Test;
+
+  setup("my_test_name");
+
+  ok(run(app(["openssl", "version"])), "check for openssl presence");
+
+  indir "subdir" => sub {
+    ok(run(test(["sometest", "arg1"], stdout => "foo.txt")),
+       "run sometest with output to foo.txt");
+  };
+
+=head1 DESCRIPTION
+
+This module is a private extension of L<Test::More> for testing OpenSSL.
+In addition to the Test::More functions, it also provides functions that
+easily find the diverse programs within a OpenSSL build tree, as well as
+some other useful functions.
+
+This module I<depends> on the environment variables C<$TOP> or C<$SRCTOP>
+and C<$BLDTOP>.  Without one of the combinations it refuses to work.
+See L</ENVIRONMENT> below.
+
+With each test recipe, a parallel data directory with (almost) the same name
+as the recipe is possible in the source directory tree.  For example, for a
+recipe C<$SRCTOP/test/recipes/99-foo.t>, there could be a directory
+C<$SRCTOP/test/recipes/99-foo_data/>.
+
+=cut
+
+use File::Copy;
+use File::Spec::Functions qw/file_name_is_absolute curdir canonpath splitdir
+                             catdir catfile splitpath catpath devnull abs2rel
+                             rel2abs/;
+use File::Path 2.00 qw/rmtree mkpath/;
+use File::Basename;
+use Cwd qw/getcwd abs_path/;
+
+my $level = 0;
+
+# The name of the test.  This is set by setup() and is used in the other
+# functions to verify that setup() has been used.
+my $test_name = undef;
+
+# Directories we want to keep track of TOP, APPS, TEST and RESULTS are the
+# ones we're interested in, corresponding to the environment variables TOP
+# (mandatory), BIN_D, TEST_D, UTIL_D and RESULT_D.
+my %directories = ();
+
+# The environment variables that gave us the contents in %directories.  These
+# get modified whenever we change directories, so that subprocesses can use
+# the values of those environment variables as well
+my @direnv = ();
+
+# A bool saying if we shall stop all testing if the current recipe has failing
+# tests or not.  This is set by setup() if the environment variable STOPTEST
+# is defined with a non-empty value.
+my $end_with_bailout = 0;
+
+# A set of hooks that is affected by with() and may be used in diverse places.
+# All hooks are expected to be CODE references.
+my %hooks = (
+
+    # exit_checker is used by run() directly after completion of a command.
+    # it receives the exit code from that command and is expected to return
+    # 1 (for success) or 0 (for failure).  This is the status value that run()
+    # will give back (through the |statusvar| reference and as returned value
+    # when capture => 1 doesn't apply).
+    exit_checker => sub { return shift == 0 ? 1 : 0 },
+
+    );
+
+# Debug flag, to be set manually when needed
+my $debug = 0;
+
+=head2 Main functions
+
+The following functions are exported by default when using C<OpenSSL::Test>.
+
+=cut
+
+=over 4
+
+=item B<setup "NAME">
+
+C<setup> is used for initial setup, and it is mandatory that it's used.
+If it's not used in a OpenSSL test recipe, the rest of the recipe will
+most likely refuse to run.
+
+C<setup> checks for environment variables (see L</ENVIRONMENT> below),
+checks that C<$TOP/Configure> or C<$SRCTOP/Configure> exists, C<chdir>
+into the results directory (defined by the C<$RESULT_D> environment
+variable if defined, otherwise C<$BLDTOP/test> or C<$TOP/test>, whichever
+is defined).
+
+=back
+
+=cut
+
+sub setup {
+    my $old_test_name = $test_name;
+    $test_name = shift;
+
+    BAIL_OUT("setup() must receive a name") unless $test_name;
+    warn "setup() detected test name change.  Innocuous, so we continue...\n"
+        if $old_test_name && $old_test_name ne $test_name;
+
+    return if $old_test_name;
+
+    BAIL_OUT("setup() needs \$TOP or \$SRCTOP and \$BLDTOP to be defined")
+        unless $ENV{TOP} || ($ENV{SRCTOP} && $ENV{BLDTOP});
+    BAIL_OUT("setup() found both \$TOP and \$SRCTOP or \$BLDTOP...")
+        if $ENV{TOP} && ($ENV{SRCTOP} || $ENV{BLDTOP});
+
+    __env();
+
+    BAIL_OUT("setup() expects the file Configure in the source top directory")
+        unless -f srctop_file("Configure");
+
+    __cwd($directories{RESULTS});
+}
+
+=over 4
+
+=item B<indir "SUBDIR" =E<gt> sub BLOCK, OPTS>
+
+C<indir> is used to run a part of the recipe in a different directory than
+the one C<setup> moved into, usually a subdirectory, given by SUBDIR.
+The part of the recipe that's run there is given by the codeblock BLOCK.
+
+C<indir> takes some additional options OPTS that affect the subdirectory:
+
+=over 4
+
+=item B<create =E<gt> 0|1>
+
+When set to 1 (or any value that perl perceives as true), the subdirectory
+will be created if it doesn't already exist.  This happens before BLOCK
+is executed.
+
+=item B<cleanup =E<gt> 0|1>
+
+When set to 1 (or any value that perl perceives as true), the subdirectory
+will be cleaned out and removed.  This happens both before and after BLOCK
+is executed.
+
+=back
+
+An example:
+
+  indir "foo" => sub {
+      ok(run(app(["openssl", "version"]), stdout => "foo.txt"));
+      if (ok(open(RESULT, "foo.txt"), "reading foo.txt")) {
+          my $line = <RESULT>;
+          close RESULT;
+          is($line, qr/^OpenSSL 1\./,
+             "check that we're using OpenSSL 1.x.x");
+      }
+  }, create => 1, cleanup => 1;
+
+=back
+
+=cut
+
+sub indir {
+    my $subdir = shift;
+    my $codeblock = shift;
+    my %opts = @_;
+
+    my $reverse = __cwd($subdir,%opts);
+    BAIL_OUT("FAILURE: indir, \"$subdir\" wasn't possible to move into")
+	unless $reverse;
+
+    $codeblock->();
+
+    __cwd($reverse);
+
+    if ($opts{cleanup}) {
+	rmtree($subdir, { safe => 0 });
+    }
+}
+
+=over 4
+
+=item B<cmd ARRAYREF, OPTS>
+
+This functions build up a platform dependent command based on the
+input.  It takes a reference to a list that is the executable or
+script and its arguments, and some additional options (described
+further on).  Where necessary, the command will be wrapped in a
+suitable environment to make sure the correct shared libraries are
+used (currently only on Unix).
+
+It returns a CODEREF to be used by C<run>, C<pipe> or C<cmdstr>.
+
+The options that C<cmd> can take are in the form of hash values:
+
+=over 4
+
+=item B<stdin =E<gt> PATH>
+
+=item B<stdout =E<gt> PATH>
+
+=item B<stderr =E<gt> PATH>
+
+In all three cases, the corresponding standard input, output or error is
+redirected from (for stdin) or to (for the others) a file given by the
+string PATH, I<or>, if the value is C<undef>, C</dev/null> or similar.
+
+=back
+
+=item B<app ARRAYREF, OPTS>
+
+=item B<test ARRAYREF, OPTS>
+
+Both of these are specific applications of C<cmd>, with just a couple
+of small difference:
+
+C<app> expects to find the given command (the first item in the given list
+reference) as an executable in C<$BIN_D> (if defined, otherwise C<$TOP/apps>
+or C<$BLDTOP/apps>).
+
+C<test> expects to find the given command (the first item in the given list
+reference) as an executable in C<$TEST_D> (if defined, otherwise C<$TOP/test>
+or C<$BLDTOP/test>).
+
+Also, for both C<app> and C<test>, the command may be prefixed with
+the content of the environment variable C<$EXE_SHELL>, which is useful
+in case OpenSSL has been cross compiled.
+
+=item B<perlapp ARRAYREF, OPTS>
+
+=item B<perltest ARRAYREF, OPTS>
+
+These are also specific applications of C<cmd>, where the interpreter
+is predefined to be C<perl>, and they expect the script to be
+interpreted to reside in the same location as C<app> and C<test>.
+
+C<perlapp> and C<perltest> will also take the following option:
+
+=over 4
+
+=item B<interpreter_args =E<gt> ARRAYref>
+
+The array reference is a set of arguments for the interpreter rather
+than the script.  Take care so that none of them can be seen as a
+script!  Flags and their eventual arguments only!
+
+=back
+
+An example:
+
+  ok(run(perlapp(["foo.pl", "arg1"],
+                 interpreter_args => [ "-I", srctop_dir("test") ])));
+
+=back
+
+=begin comment
+
+One might wonder over the complexity of C<apps>, C<fuzz>, C<test>, ...
+with all the lazy evaluations and all that.  The reason for this is that
+we want to make sure the directory in which those programs are found are
+correct at the time these commands are used.  Consider the following code
+snippet:
+
+  my $cmd = app(["openssl", ...]);
+
+  indir "foo", sub {
+      ok(run($cmd), "Testing foo")
+  };
+
+If there wasn't this lazy evaluation, the directory where C<openssl> is
+found would be incorrect at the time C<run> is called, because it was
+calculated before we moved into the directory "foo".
+
+=end comment
+
+=cut
+
+sub cmd {
+    my $cmd = shift;
+    my %opts = @_;
+    return sub {
+        my $num = shift;
+        # Make a copy to not destroy the caller's array
+        my @cmdargs = ( @$cmd );
+        my @prog = __wrap_cmd(shift @cmdargs, $opts{exe_shell} // ());
+
+        return __decorate_cmd($num, [ @prog, quotify(@cmdargs) ],
+                              %opts);
+    }
+}
+
+sub app {
+    my $cmd = shift;
+    my %opts = @_;
+    return sub {
+        my @cmdargs = ( @{$cmd} );
+        my @prog = __fixup_prg(__apps_file(shift @cmdargs, __exeext()));
+        return cmd([ @prog, @cmdargs ],
+                   exe_shell => $ENV{EXE_SHELL}, %opts) -> (shift);
+    }
+}
+
+sub fuzz {
+    my $cmd = shift;
+    my %opts = @_;
+    return sub {
+        my @cmdargs = ( @{$cmd} );
+        my @prog = __fixup_prg(__fuzz_file(shift @cmdargs, __exeext()));
+        return cmd([ @prog, @cmdargs ],
+                   exe_shell => $ENV{EXE_SHELL}, %opts) -> (shift);
+    }
+}
+
+sub test {
+    my $cmd = shift;
+    my %opts = @_;
+    return sub {
+        my @cmdargs = ( @{$cmd} );
+        my @prog = __fixup_prg(__test_file(shift @cmdargs, __exeext()));
+        return cmd([ @prog, @cmdargs ],
+                   exe_shell => $ENV{EXE_SHELL}, %opts) -> (shift);
+    }
+}
+
+sub perlapp {
+    my $cmd = shift;
+    my %opts = @_;
+    return sub {
+        my @interpreter_args = defined $opts{interpreter_args} ?
+            @{$opts{interpreter_args}} : ();
+        my @interpreter = __fixup_prg($^X);
+        my @cmdargs = ( @{$cmd} );
+        my @prog = __apps_file(shift @cmdargs, undef);
+        return cmd([ @interpreter, @interpreter_args,
+                     @prog, @cmdargs ], %opts) -> (shift);
+    }
+}
+
+sub perltest {
+    my $cmd = shift;
+    my %opts = @_;
+    return sub {
+        my @interpreter_args = defined $opts{interpreter_args} ?
+            @{$opts{interpreter_args}} : ();
+        my @interpreter = __fixup_prg($^X);
+        my @cmdargs = ( @{$cmd} );
+        my @prog = __test_file(shift @cmdargs, undef);
+        return cmd([ @interpreter, @interpreter_args,
+                     @prog, @cmdargs ], %opts) -> (shift);
+    }
+}
+
+=over 4
+
+=item B<run CODEREF, OPTS>
+
+CODEREF is expected to be the value return by C<cmd> or any of its
+derivatives, anything else will most likely cause an error unless you
+know what you're doing.
+
+C<run> executes the command returned by CODEREF and return either the
+resulting output (if the option C<capture> is set true) or a boolean
+indicating if the command succeeded or not.
+
+The options that C<run> can take are in the form of hash values:
+
+=over 4
+
+=item B<capture =E<gt> 0|1>
+
+If true, the command will be executed with a perl backtick, and C<run> will
+return the resulting output as an array of lines.  If false or not given,
+the command will be executed with C<system()>, and C<run> will return 1 if
+the command was successful or 0 if it wasn't.
+
+=item B<prefix =E<gt> EXPR>
+
+If specified, EXPR will be used as a string to prefix the output from the
+command.  This is useful if the output contains lines starting with C<ok >
+or C<not ok > that can disturb Test::Harness.
+
+=item B<statusvar =E<gt> VARREF>
+
+If used, B<VARREF> must be a reference to a scalar variable.  It will be
+assigned a boolean indicating if the command succeeded or not.  This is
+particularly useful together with B<capture>.
+
+=back
+
+For further discussion on what is considered a successful command or not, see
+the function C<with> further down.
+
+=back
+
+=cut
+
+sub run {
+    my ($cmd, $display_cmd) = shift->(0);
+    my %opts = @_;
+
+    return () if !$cmd;
+
+    my $prefix = "";
+    if ( $^O eq "VMS" ) {	# VMS
+	$prefix = "pipe ";
+    }
+
+    my @r = ();
+    my $r = 0;
+    my $e = 0;
+
+    die "OpenSSL::Test::run(): statusvar value not a scalar reference"
+        if $opts{statusvar} && ref($opts{statusvar}) ne "SCALAR";
+
+    # In non-verbose, we want to shut up the command interpreter, in case
+    # it has something to complain about.  On VMS, it might complain both
+    # on stdout and stderr
+    my $save_STDOUT;
+    my $save_STDERR;
+    if ($ENV{HARNESS_ACTIVE} && !$ENV{HARNESS_VERBOSE}) {
+        open $save_STDOUT, '>&', \*STDOUT or die "Can't dup STDOUT: $!";
+        open $save_STDERR, '>&', \*STDERR or die "Can't dup STDERR: $!";
+        open STDOUT, ">", devnull();
+        open STDERR, ">", devnull();
+    }
+
+    $ENV{HARNESS_OSSL_LEVEL} = $level + 1;
+
+    # The dance we do with $? is the same dance the Unix shells appear to
+    # do.  For example, a program that gets aborted (and therefore signals
+    # SIGABRT = 6) will appear to exit with the code 134.  We mimic this
+    # to make it easier to compare with a manual run of the command.
+    if ($opts{capture} || defined($opts{prefix})) {
+	my $pipe;
+	local $_;
+
+	open($pipe, '-|', "$prefix$cmd") or die "Can't start command: $!";
+	while(<$pipe>) {
+	    my $l = ($opts{prefix} // "") . $_;
+	    if ($opts{capture}) {
+		push @r, $l;
+	    } else {
+		print STDOUT $l;
+	    }
+	}
+	close $pipe;
+    } else {
+	$ENV{HARNESS_OSSL_PREFIX} = "# ";
+	system("$prefix$cmd");
+	delete $ENV{HARNESS_OSSL_PREFIX};
+    }
+    $e = ($? & 0x7f) ? ($? & 0x7f)|0x80 : ($? >> 8);
+    $r = $hooks{exit_checker}->($e);
+    if ($opts{statusvar}) {
+        ${$opts{statusvar}} = $r;
+    }
+
+    if ($ENV{HARNESS_ACTIVE} && !$ENV{HARNESS_VERBOSE}) {
+        close STDOUT;
+        close STDERR;
+        open STDOUT, '>&', $save_STDOUT or die "Can't restore STDOUT: $!";
+        open STDERR, '>&', $save_STDERR or die "Can't restore STDERR: $!";
+    }
+
+    print STDERR "$prefix$display_cmd => $e\n"
+        if !$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE};
+
+    # At this point, $? stops being interesting, and unfortunately,
+    # there are Test::More versions that get picky if we leave it
+    # non-zero.
+    $? = 0;
+
+    if ($opts{capture}) {
+	return @r;
+    } else {
+	return $r;
+    }
+}
+
+END {
+    my $tb = Test::More->builder;
+    my $failure = scalar(grep { $_ == 0; } $tb->summary);
+    if ($failure && $end_with_bailout) {
+	BAIL_OUT("Stoptest!");
+    }
+}
+
+=head2 Utility functions
+
+The following functions are exported on request when using C<OpenSSL::Test>.
+
+  # To only get the bldtop_file and srctop_file functions.
+  use OpenSSL::Test qw/bldtop_file srctop_file/;
+
+  # To only get the bldtop_file function in addition to the default ones.
+  use OpenSSL::Test qw/:DEFAULT bldtop_file/;
+
+=cut
+
+# Utility functions, exported on request
+
+=over 4
+
+=item B<bldtop_dir LIST>
+
+LIST is a list of directories that make up a path from the top of the OpenSSL
+build directory (as indicated by the environment variable C<$TOP> or
+C<$BLDTOP>).
+C<bldtop_dir> returns the resulting directory as a string, adapted to the local
+operating system.
+
+=back
+
+=cut
+
+sub bldtop_dir {
+    return __bldtop_dir(@_);	# This caters for operating systems that have
+				# a very distinct syntax for directories.
+}
+
+=over 4
+
+=item B<bldtop_file LIST, FILENAME>
+
+LIST is a list of directories that make up a path from the top of the OpenSSL
+build directory (as indicated by the environment variable C<$TOP> or
+C<$BLDTOP>) and FILENAME is the name of a file located in that directory path.
+C<bldtop_file> returns the resulting file path as a string, adapted to the local
+operating system.
+
+=back
+
+=cut
+
+sub bldtop_file {
+    return __bldtop_file(@_);
+}
+
+=over 4
+
+=item B<srctop_dir LIST>
+
+LIST is a list of directories that make up a path from the top of the OpenSSL
+source directory (as indicated by the environment variable C<$TOP> or
+C<$SRCTOP>).
+C<srctop_dir> returns the resulting directory as a string, adapted to the local
+operating system.
+
+=back
+
+=cut
+
+sub srctop_dir {
+    return __srctop_dir(@_);	# This caters for operating systems that have
+				# a very distinct syntax for directories.
+}
+
+=over 4
+
+=item B<srctop_file LIST, FILENAME>
+
+LIST is a list of directories that make up a path from the top of the OpenSSL
+source directory (as indicated by the environment variable C<$TOP> or
+C<$SRCTOP>) and FILENAME is the name of a file located in that directory path.
+C<srctop_file> returns the resulting file path as a string, adapted to the local
+operating system.
+
+=back
+
+=cut
+
+sub srctop_file {
+    return __srctop_file(@_);
+}
+
+=over 4
+
+=item B<data_dir LIST>
+
+LIST is a list of directories that make up a path from the data directory
+associated with the test (see L</DESCRIPTION> above).
+C<data_dir> returns the resulting directory as a string, adapted to the local
+operating system.
+
+=back
+
+=cut
+
+sub data_dir {
+    return __data_dir(@_);
+}
+
+=over 4
+
+=item B<data_file LIST, FILENAME>
+
+LIST is a list of directories that make up a path from the data directory
+associated with the test (see L</DESCRIPTION> above) and FILENAME is the name
+of a file located in that directory path.  C<data_file> returns the resulting
+file path as a string, adapted to the local operating system.
+
+=back
+
+=cut
+
+sub data_file {
+    return __data_file(@_);
+}
+
+=over 4
+
+=item B<pipe LIST>
+
+LIST is a list of CODEREFs returned by C<app> or C<test>, from which C<pipe>
+creates a new command composed of all the given commands put together in a
+pipe.  C<pipe> returns a new CODEREF in the same manner as C<app> or C<test>,
+to be passed to C<run> for execution.
+
+=back
+
+=cut
+
+sub pipe {
+    my @cmds = @_;
+    return
+	sub {
+	    my @cs  = ();
+	    my @dcs = ();
+	    my @els = ();
+	    my $counter = 0;
+	    foreach (@cmds) {
+		my ($c, $dc, @el) = $_->(++$counter);
+
+		return () if !$c;
+
+		push @cs, $c;
+		push @dcs, $dc;
+		push @els, @el;
+	    }
+	    return (
+		join(" | ", @cs),
+		join(" | ", @dcs),
+		@els
+		);
+    };
+}
+
+=over 4
+
+=item B<with HASHREF, CODEREF>
+
+C<with> will temporarily install hooks given by the HASHREF and then execute
+the given CODEREF.  Hooks are usually expected to have a coderef as value.
+
+The currently available hoosk are:
+
+=over 4
+
+=item B<exit_checker =E<gt> CODEREF>
+
+This hook is executed after C<run> has performed its given command.  The
+CODEREF receives the exit code as only argument and is expected to return
+1 (if the exit code indicated success) or 0 (if the exit code indicated
+failure).
+
+=back
+
+=back
+
+=cut
+
+sub with {
+    my $opts = shift;
+    my %opts = %{$opts};
+    my $codeblock = shift;
+
+    my %saved_hooks = ();
+
+    foreach (keys %opts) {
+	$saved_hooks{$_} = $hooks{$_}	if exists($hooks{$_});
+	$hooks{$_} = $opts{$_};
+    }
+
+    $codeblock->();
+
+    foreach (keys %saved_hooks) {
+	$hooks{$_} = $saved_hooks{$_};
+    }
+}
+
+=over 4
+
+=item B<cmdstr CODEREF, OPTS>
+
+C<cmdstr> takes a CODEREF from C<app> or C<test> and simply returns the
+command as a string.
+
+C<cmdstr> takes some additional options OPTS that affect the string returned:
+
+=over 4
+
+=item B<display =E<gt> 0|1>
+
+When set to 0, the returned string will be with all decorations, such as a
+possible redirect of stderr to the null device.  This is suitable if the
+string is to be used directly in a recipe.
+
+When set to 1, the returned string will be without extra decorations.  This
+is suitable for display if that is desired (doesn't confuse people with all
+internal stuff), or if it's used to pass a command down to a subprocess.
+
+Default: 0
+
+=back
+
+=back
+
+=cut
+
+sub cmdstr {
+    my ($cmd, $display_cmd) = shift->(0);
+    my %opts = @_;
+
+    if ($opts{display}) {
+        return $display_cmd;
+    } else {
+        return $cmd;
+    }
+}
+
+=over 4
+
+=item B<quotify LIST>
+
+LIST is a list of strings that are going to be used as arguments for a
+command, and makes sure to inject quotes and escapes as necessary depending
+on the content of each string.
+
+This can also be used to put quotes around the executable of a command.
+I<This must never ever be done on VMS.>
+
+=back
+
+=cut
+
+sub quotify {
+    # Unix setup (default if nothing else is mentioned)
+    my $arg_formatter =
+	sub { $_ = shift;
+	      ($_ eq '' || /\s|[\{\}\\\$\[\]\*\?\|\&:;<>]/) ? "'$_'" : $_ };
+
+    if ( $^O eq "VMS") {	# VMS setup
+	$arg_formatter = sub {
+	    $_ = shift;
+	    if ($_ eq '' || /\s|["[:upper:]]/) {
+		s/"/""/g;
+		'"'.$_.'"';
+	    } else {
+		$_;
+	    }
+	};
+    } elsif ( $^O eq "MSWin32") { # MSWin setup
+	$arg_formatter = sub {
+	    $_ = shift;
+	    if ($_ eq '' || /\s|["\|\&\*\;<>]/) {
+		s/(["\\])/\\$1/g;
+		'"'.$_.'"';
+	    } else {
+		$_;
+	    }
+	};
+    }
+
+    return map { $arg_formatter->($_) } @_;
+}
+
+=over 4
+
+=item B<openssl_versions>
+
+Returns a list of two numbers, the first representing the build version,
+the second representing the library version.  See opensslv.h for more
+information on those numbers.
+
+=back
+
+=cut
+
+my @versions = ();
+sub openssl_versions {
+    unless (@versions) {
+        my %lines =
+            map { s/\R$//;
+                  /^(.*): (0x[[:xdigit:]]{8})$/;
+                  die "Weird line: $_" unless defined $1;
+                  $1 => hex($2) }
+            run(test(['versions']), capture => 1);
+        @versions = ( $lines{'Build version'}, $lines{'Library version'} );
+    }
+    return @versions;
+}
+
+######################################################################
+# private functions.  These are never exported.
+
+=head1 ENVIRONMENT
+
+OpenSSL::Test depends on some environment variables.
+
+=over 4
+
+=item B<TOP>
+
+This environment variable is mandatory.  C<setup> will check that it's
+defined and that it's a directory that contains the file C<Configure>.
+If this isn't so, C<setup> will C<BAIL_OUT>.
+
+=item B<BIN_D>
+
+If defined, its value should be the directory where the openssl application
+is located.  Defaults to C<$TOP/apps> (adapted to the operating system).
+
+=item B<TEST_D>
+
+If defined, its value should be the directory where the test applications
+are located.  Defaults to C<$TOP/test> (adapted to the operating system).
+
+=item B<STOPTEST>
+
+If defined, it puts testing in a different mode, where a recipe with
+failures will result in a C<BAIL_OUT> at the end of its run.
+
+=back
+
+=cut
+
+sub __env {
+    (my $recipe_datadir = basename($0)) =~ s/\.t$/_data/i;
+
+    $directories{SRCTOP}  = abs_path($ENV{SRCTOP} || $ENV{TOP});
+    $directories{BLDTOP}  = abs_path($ENV{BLDTOP} || $ENV{TOP});
+    $directories{BLDAPPS} = $ENV{BIN_D}  || __bldtop_dir("apps");
+    $directories{SRCAPPS} =                 __srctop_dir("apps");
+    $directories{BLDFUZZ} =                 __bldtop_dir("fuzz");
+    $directories{SRCFUZZ} =                 __srctop_dir("fuzz");
+    $directories{BLDTEST} = $ENV{TEST_D} || __bldtop_dir("test");
+    $directories{SRCTEST} =                 __srctop_dir("test");
+    $directories{SRCDATA} =                 __srctop_dir("test", "recipes",
+                                                         $recipe_datadir);
+    $directories{RESULTS} = $ENV{RESULT_D} || $directories{BLDTEST};
+
+    push @direnv, "TOP"       if $ENV{TOP};
+    push @direnv, "SRCTOP"    if $ENV{SRCTOP};
+    push @direnv, "BLDTOP"    if $ENV{BLDTOP};
+    push @direnv, "BIN_D"     if $ENV{BIN_D};
+    push @direnv, "TEST_D"    if $ENV{TEST_D};
+    push @direnv, "RESULT_D"  if $ENV{RESULT_D};
+
+    $end_with_bailout	  = $ENV{STOPTEST} ? 1 : 0;
+};
+
+# __srctop_file and __srctop_dir are helpers to build file and directory
+# names on top of the source directory.  They depend on $SRCTOP, and
+# therefore on the proper use of setup() and when needed, indir().
+# __bldtop_file and __bldtop_dir do the same thing but relative to $BLDTOP.
+# __srctop_file and __bldtop_file take the same kind of argument as
+# File::Spec::Functions::catfile.
+# Similarly, __srctop_dir and __bldtop_dir take the same kind of argument
+# as File::Spec::Functions::catdir
+sub __srctop_file {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $f = pop;
+    return abs2rel(catfile($directories{SRCTOP},@_,$f),getcwd);
+}
+
+sub __srctop_dir {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    return abs2rel(catdir($directories{SRCTOP},@_), getcwd);
+}
+
+sub __bldtop_file {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $f = pop;
+    return abs2rel(catfile($directories{BLDTOP},@_,$f), getcwd);
+}
+
+sub __bldtop_dir {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    return abs2rel(catdir($directories{BLDTOP},@_), getcwd);
+}
+
+# __exeext is a function that returns the platform dependent file extension
+# for executable binaries, or the value of the environment variable $EXE_EXT
+# if that one is defined.
+sub __exeext {
+    my $ext = "";
+    if ($^O eq "VMS" ) {	# VMS
+	$ext = ".exe";
+    } elsif ($^O eq "MSWin32") { # Windows
+	$ext = ".exe";
+    }
+    return $ENV{"EXE_EXT"} || $ext;
+}
+
+# __test_file, __apps_file and __fuzz_file return the full path to a file
+# relative to the test/, apps/ or fuzz/ directory in the build tree or the
+# source tree, depending on where the file is found.  Note that when looking
+# in the build tree, the file name with an added extension is looked for, if
+# an extension is given.  The intent is to look for executable binaries (in
+# the build tree) or possibly scripts (in the source tree).
+# These functions all take the same arguments as File::Spec::Functions::catfile,
+# *plus* a mandatory extension argument.  This extension argument can be undef,
+# and is ignored in such a case.
+sub __test_file {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $e = pop || "";
+    my $f = pop;
+    my $out = catfile($directories{BLDTEST},@_,$f . $e);
+    $out = catfile($directories{SRCTEST},@_,$f) unless -f $out;
+    return $out;
+}
+
+sub __apps_file {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $e = pop || "";
+    my $f = pop;
+    my $out = catfile($directories{BLDAPPS},@_,$f . $e);
+    $out = catfile($directories{SRCAPPS},@_,$f) unless -f $out;
+    return $out;
+}
+
+sub __fuzz_file {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $e = pop || "";
+    my $f = pop;
+    my $out = catfile($directories{BLDFUZZ},@_,$f . $e);
+    $out = catfile($directories{SRCFUZZ},@_,$f) unless -f $out;
+    return $out;
+}
+
+sub __data_file {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $f = pop;
+    return catfile($directories{SRCDATA},@_,$f);
+}
+
+sub __data_dir {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    return catdir($directories{SRCDATA},@_);
+}
+
+sub __results_file {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $f = pop;
+    return catfile($directories{RESULTS},@_,$f);
+}
+
+# __cwd DIR
+# __cwd DIR, OPTS
+#
+# __cwd changes directory to DIR (string) and changes all the relative
+# entries in %directories accordingly.  OPTS is an optional series of
+# hash style arguments to alter __cwd's behavior:
+#
+#    create = 0|1       The directory we move to is created if 1, not if 0.
+#    cleanup = 0|1      The directory we move from is removed if 1, not if 0.
+
+sub __cwd {
+    my $dir = catdir(shift);
+    my %opts = @_;
+    my $abscurdir = rel2abs(curdir());
+    my $absdir = rel2abs($dir);
+    my $reverse = abs2rel($abscurdir, $absdir);
+
+    # PARANOIA: if we're not moving anywhere, we do nothing more
+    if ($abscurdir eq $absdir) {
+	return $reverse;
+    }
+
+    # Do not support a move to a different volume for now.  Maybe later.
+    BAIL_OUT("FAILURE: \"$dir\" moves to a different volume, not supported")
+	if $reverse eq $abscurdir;
+
+    # If someone happened to give a directory that leads back to the current,
+    # it's extremely silly to do anything more, so just simulate that we did
+    # move.
+    # In this case, we won't even clean it out, for safety's sake.
+    return "." if $reverse eq "";
+
+    $dir = canonpath($dir);
+    if ($opts{create}) {
+	mkpath($dir);
+    }
+
+    # We are recalculating the directories we keep track of, but need to save
+    # away the result for after having moved into the new directory.
+    my %tmp_directories = ();
+    my %tmp_ENV = ();
+
+    # For each of these directory variables, figure out where they are relative
+    # to the directory we want to move to if they aren't absolute (if they are,
+    # they don't change!)
+    my @dirtags = sort keys %directories;
+    foreach (@dirtags) {
+	if (!file_name_is_absolute($directories{$_})) {
+	    my $newpath = abs2rel(rel2abs($directories{$_}), rel2abs($dir));
+	    $tmp_directories{$_} = $newpath;
+	}
+    }
+
+    # Treat each environment variable that was used to get us the values in
+    # %directories the same was as the paths in %directories, so any sub
+    # process can use their values properly as well
+    foreach (@direnv) {
+	if (!file_name_is_absolute($ENV{$_})) {
+	    my $newpath = abs2rel(rel2abs($ENV{$_}), rel2abs($dir));
+	    $tmp_ENV{$_} = $newpath;
+	}
+    }
+
+    # Should we just bail out here as well?  I'm unsure.
+    return undef unless chdir($dir);
+
+    if ($opts{cleanup}) {
+	rmtree(".", { safe => 0, keep_root => 1 });
+    }
+
+    # We put back new values carefully.  Doing the obvious
+    # %directories = ( %tmp_directories )
+    # will clear out any value that happens to be an absolute path
+    foreach (keys %tmp_directories) {
+        $directories{$_} = $tmp_directories{$_};
+    }
+    foreach (keys %tmp_ENV) {
+        $ENV{$_} = $tmp_ENV{$_};
+    }
+
+    if ($debug) {
+	print STDERR "DEBUG: __cwd(), directories and files:\n";
+	print STDERR "  \$directories{BLDTEST} = \"$directories{BLDTEST}\"\n";
+	print STDERR "  \$directories{SRCTEST} = \"$directories{SRCTEST}\"\n";
+	print STDERR "  \$directories{SRCDATA} = \"$directories{SRCDATA}\"\n";
+	print STDERR "  \$directories{RESULTS} = \"$directories{RESULTS}\"\n";
+	print STDERR "  \$directories{BLDAPPS} = \"$directories{BLDAPPS}\"\n";
+	print STDERR "  \$directories{SRCAPPS} = \"$directories{SRCAPPS}\"\n";
+	print STDERR "  \$directories{SRCTOP}  = \"$directories{SRCTOP}\"\n";
+	print STDERR "  \$directories{BLDTOP}  = \"$directories{BLDTOP}\"\n";
+	print STDERR "\n";
+	print STDERR "  current directory is \"",curdir(),"\"\n";
+	print STDERR "  the way back is \"$reverse\"\n";
+    }
+
+    return $reverse;
+}
+
+# __wrap_cmd CMD
+# __wrap_cmd CMD, EXE_SHELL
+#
+# __wrap_cmd "wraps" CMD (string) with a beginning command that makes sure
+# the command gets executed with an appropriate environment.  If EXE_SHELL
+# is given, it is used as the beginning command.
+#
+# __wrap_cmd returns a list that should be used to build up a larger list
+# of command tokens, or be joined together like this:
+#
+#    join(" ", __wrap_cmd($cmd))
+sub __wrap_cmd {
+    my $cmd = shift;
+    my $exe_shell = shift;
+
+    my @prefix = ( __bldtop_file("util", "shlib_wrap.sh") );
+
+    if(defined($exe_shell)) {
+	@prefix = ( $exe_shell );
+    } elsif ($^O eq "VMS" || $^O eq "MSWin32") {
+	# VMS and Windows don't use any wrapper script for the moment
+	@prefix = ();
+    }
+
+    return (@prefix, $cmd);
+}
+
+# __fixup_prg PROG
+#
+# __fixup_prg does whatever fixup is needed to execute an executable binary
+# given by PROG (string).
+#
+# __fixup_prg returns a string with the possibly prefixed program path spec.
+sub __fixup_prg {
+    my $prog = shift;
+
+    my $prefix = "";
+
+    if ($^O eq "VMS" ) {
+	$prefix = ($prog =~ /^(?:[\$a-z0-9_]+:)?[<\[]/i ? "mcr " : "mcr []");
+    }
+
+    if (defined($prog)) {
+	# Make sure to quotify the program file on platforms that may
+	# have spaces or similar in their path name.
+	# To our knowledge, VMS is the exception where quotifying should
+	# never happen.
+	($prog) = quotify($prog) unless $^O eq "VMS";
+	return $prefix.$prog;
+    }
+
+    print STDERR "$prog not found\n";
+    return undef;
+}
+
+# __decorate_cmd NUM, CMDARRAYREF
+#
+# __decorate_cmd takes a command number NUM and a command token array
+# CMDARRAYREF, builds up a command string from them and decorates it
+# with necessary redirections.
+# __decorate_cmd returns a list of two strings, one with the command
+# string to actually be used, the other to be displayed for the user.
+# The reason these strings might differ is that we redirect stderr to
+# the null device unless we're verbose and unless the user has
+# explicitly specified a stderr redirection.
+sub __decorate_cmd {
+    BAIL_OUT("Must run setup() first") if (! $test_name);
+
+    my $num = shift;
+    my $cmd = shift;
+    my %opts = @_;
+
+    my $cmdstr = join(" ", @$cmd);
+    my $null = devnull();
+    my $fileornull = sub { $_[0] ? $_[0] : $null; };
+    my $stdin = "";
+    my $stdout = "";
+    my $stderr = "";
+    my $saved_stderr = undef;
+    $stdin = " < ".$fileornull->($opts{stdin})  if exists($opts{stdin});
+    $stdout= " > ".$fileornull->($opts{stdout}) if exists($opts{stdout});
+    $stderr=" 2> ".$fileornull->($opts{stderr}) if exists($opts{stderr});
+
+    my $display_cmd = "$cmdstr$stdin$stdout$stderr";
+
+    $stderr=" 2> ".$null
+        unless $stderr || !$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE};
+
+    $cmdstr .= "$stdin$stdout$stderr";
+
+    if ($debug) {
+	print STDERR "DEBUG[__decorate_cmd]: \$cmdstr = \"$cmdstr\"\n";
+	print STDERR "DEBUG[__decorate_cmd]: \$display_cmd = \"$display_cmd\"\n";
+    }
+
+    return ($cmdstr, $display_cmd);
+}
+
+=head1 SEE ALSO
+
+L<Test::More>, L<Test::Harness>
+
+=head1 AUTHORS
+
+Richard Levitte E<lt>levitte@openssl.orgE<gt> with assistance and
+inspiration from Andy Polyakov E<lt>appro@openssl.org<gt>.
+
+=cut
+
+no warnings 'redefine';
+sub subtest {
+    $level++;
+
+    Test::More::subtest @_;
+
+    $level--;
+};
+
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test/Simple.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test/Simple.pm
new file mode 100644
index 0000000..c5a84d5
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test/Simple.pm
@@ -0,0 +1,91 @@
+# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+package OpenSSL::Test::Simple;
+
+use strict;
+use warnings;
+
+use Exporter;
+use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS);
+$VERSION = "0.2";
+@ISA = qw(Exporter);
+@EXPORT = qw(simple_test);
+
+=head1 NAME
+
+OpenSSL::Test::Simple - a few very simple test functions
+
+=head1 SYNOPSIS
+
+  use OpenSSL::Test::Simple;
+
+  simple_test("my_test_name", "destest", "des");
+
+=head1 DESCRIPTION
+
+Sometimes, the functions in L<OpenSSL::Test> are quite tedious for some
+repetitive tasks.  This module provides functions to make life easier.
+You could call them hacks if you wish.
+
+=cut
+
+use OpenSSL::Test;
+use OpenSSL::Test::Utils;
+
+=over 4
+
+=item B<simple_test NAME, PROGRAM, ALGORITHM>
+
+Runs a test named NAME, running the program PROGRAM with no arguments,
+to test the algorithm ALGORITHM.
+
+A complete recipe looks like this:
+
+  use OpenSSL::Test::Simple;
+
+  simple_test("test_bf", "bftest", "bf");
+
+=back
+
+=cut
+
+# args:
+#  name			(used with setup())
+#  algorithm		(used to check if it's at all supported)
+#  name of binary	(the program that does the actual test)
+sub simple_test {
+    my ($name, $prgr, @algos) = @_;
+
+    setup($name);
+
+    if (scalar(disabled(@algos))) {
+	if (scalar(@algos) == 1) {
+	    plan skip_all => $algos[0]." is not supported by this OpenSSL build";
+	} else {
+	    my $last = pop @algos;
+	    plan skip_all => join(", ", @algos)." and $last are not supported by this OpenSSL build";
+	}
+    }
+
+    plan tests => 1;
+
+    ok(run(test([$prgr])), "running $prgr");
+}
+
+=head1 SEE ALSO
+
+L<OpenSSL::Test>
+
+=head1 AUTHORS
+
+Richard Levitte E<lt>levitte@openssl.orgE<gt> with inspiration
+from Rich Salz E<lt>rsalz@openssl.orgE<gt>.
+
+=cut
+
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test/Utils.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test/Utils.pm
new file mode 100644
index 0000000..7b0a705
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Test/Utils.pm
@@ -0,0 +1,240 @@
+# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+package OpenSSL::Test::Utils;
+
+use strict;
+use warnings;
+
+use Exporter;
+use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS);
+$VERSION = "0.1";
+@ISA = qw(Exporter);
+@EXPORT = qw(alldisabled anydisabled disabled config available_protocols
+             have_IPv4 have_IPv6);
+
+=head1 NAME
+
+OpenSSL::Test::Utils - test utility functions
+
+=head1 SYNOPSIS
+
+  use OpenSSL::Test::Utils;
+
+  my @tls = available_protocols("tls");
+  my @dtls = available_protocols("dtls");
+  alldisabled("dh", "dsa");
+  anydisabled("dh", "dsa");
+
+  config("fips");
+
+  have_IPv4();
+  have_IPv6();
+
+=head1 DESCRIPTION
+
+This module provides utility functions for the testing framework.
+
+=cut
+
+use OpenSSL::Test qw/:DEFAULT bldtop_file/;
+
+=over 4
+
+=item B<available_protocols STRING>
+
+Returns a list of strings for all the available SSL/TLS versions if
+STRING is "tls", or for all the available DTLS versions if STRING is
+"dtls".  Otherwise, it returns the empty list.  The strings in the
+returned list can be used with B<alldisabled> and B<anydisabled>.
+
+=item B<alldisabled ARRAY>
+=item B<anydisabled ARRAY>
+
+In an array context returns an array with each element set to 1 if the
+corresponding feature is disabled and 0 otherwise.
+
+In a scalar context, alldisabled returns 1 if all of the features in
+ARRAY are disabled, while anydisabled returns 1 if any of them are
+disabled.
+
+=item B<config STRING>
+
+Returns an item from the %config hash in \$TOP/configdata.pm.
+
+=item B<have_IPv4>
+=item B<have_IPv6>
+
+Return true if IPv4 / IPv6 is possible to use on the current system.
+
+=back
+
+=cut
+
+our %available_protocols;
+our %disabled;
+our %config;
+my $configdata_loaded = 0;
+
+sub load_configdata {
+    # We eval it so it doesn't run at compile time of this file.
+    # The latter would have bldtop_file() complain that setup() hasn't
+    # been run yet.
+    my $configdata = bldtop_file("configdata.pm");
+    eval { require $configdata;
+	   %available_protocols = %configdata::available_protocols;
+	   %disabled = %configdata::disabled;
+	   %config = %configdata::config;
+    };
+    $configdata_loaded = 1;
+}
+
+# args
+#  list of 1s and 0s, coming from check_disabled()
+sub anyof {
+    my $x = 0;
+    foreach (@_) { $x += $_ }
+    return $x > 0;
+}
+
+# args
+#  list of 1s and 0s, coming from check_disabled()
+sub allof {
+    my $x = 1;
+    foreach (@_) { $x *= $_ }
+    return $x > 0;
+}
+
+# args
+#  list of strings, all of them should be names of features
+#  that can be disabled.
+# returns a list of 1s (if the corresponding feature is disabled)
+#  and 0s (if it isn't)
+sub check_disabled {
+    return map { exists $disabled{lc $_} ? 1 : 0 } @_;
+}
+
+# Exported functions #################################################
+
+# args:
+#  list of features to check
+sub anydisabled {
+    load_configdata() unless $configdata_loaded;
+    my @ret = check_disabled(@_);
+    return @ret if wantarray;
+    return anyof(@ret);
+}
+
+# args:
+#  list of features to check
+sub alldisabled {
+    load_configdata() unless $configdata_loaded;
+    my @ret = check_disabled(@_);
+    return @ret if wantarray;
+    return allof(@ret);
+}
+
+# !!! Kept for backward compatibility
+# args:
+#  single string
+sub disabled {
+    anydisabled(@_);
+}
+
+sub available_protocols {
+    load_configdata() unless $configdata_loaded;
+    my $protocol_class = shift;
+    if (exists $available_protocols{lc $protocol_class}) {
+	return @{$available_protocols{lc $protocol_class}}
+    }
+    return ();
+}
+
+sub config {
+    load_configdata() unless $configdata_loaded;
+    return $config{$_[0]};
+}
+
+# IPv4 / IPv6 checker
+my $have_IPv4 = -1;
+my $have_IPv6 = -1;
+my $IP_factory;
+sub check_IP {
+    my $listenaddress = shift;
+
+    eval {
+        require IO::Socket::IP;
+        my $s = IO::Socket::IP->new(
+            LocalAddr => $listenaddress,
+            LocalPort => 0,
+            Listen=>1,
+            );
+        $s or die "\n";
+        $s->close();
+    };
+    if ($@ eq "") {
+        return 1;
+    }
+
+    eval {
+        require IO::Socket::INET6;
+        my $s = IO::Socket::INET6->new(
+            LocalAddr => $listenaddress,
+            LocalPort => 0,
+            Listen=>1,
+            );
+        $s or die "\n";
+        $s->close();
+    };
+    if ($@ eq "") {
+        return 1;
+    }
+
+    eval {
+        require IO::Socket::INET;
+        my $s = IO::Socket::INET->new(
+            LocalAddr => $listenaddress,
+            LocalPort => 0,
+            Listen=>1,
+            );
+        $s or die "\n";
+        $s->close();
+    };
+    if ($@ eq "") {
+        return 1;
+    }
+
+    return 0;
+}
+
+sub have_IPv4 {
+    if ($have_IPv4 < 0) {
+        $have_IPv4 = check_IP("127.0.0.1");
+    }
+    return $have_IPv4;
+}
+
+sub have_IPv6 {
+    if ($have_IPv6 < 0) {
+        $have_IPv6 = check_IP("::1");
+    }
+    return $have_IPv6;
+}
+
+
+=head1 SEE ALSO
+
+L<OpenSSL::Test>
+
+=head1 AUTHORS
+
+Stephen Henson E<lt>steve@openssl.orgE<gt> and
+Richard Levitte E<lt>levitte@openssl.orgE<gt>
+
+=cut
+
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Util/Pod.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Util/Pod.pm
new file mode 100644
index 0000000..9f76fbf
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/OpenSSL/Util/Pod.pm
@@ -0,0 +1,149 @@
+# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+package OpenSSL::Util::Pod;
+
+use strict;
+use warnings;
+
+use Exporter;
+use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS);
+$VERSION = "0.1";
+@ISA = qw(Exporter);
+@EXPORT = qw(extract_pod_info);
+@EXPORT_OK = qw();
+
+=head1 NAME
+
+OpenSSL::Util::Pod - utilities to manipulate .pod files
+
+=head1 SYNOPSIS
+
+  use OpenSSL::Util::Pod;
+
+  my %podinfo = extract_pod_info("foo.pod");
+
+  # or if the file is already opened...  Note that this consumes the
+  # remainder of the file.
+
+  my %podinfo = extract_pod_info(\*STDIN);
+
+=head1 DESCRIPTION
+
+=over
+
+=item B<extract_pod_info "FILENAME", HASHREF>
+
+=item B<extract_pod_info "FILENAME">
+
+=item B<extract_pod_info GLOB, HASHREF>
+
+=item B<extract_pod_info GLOB>
+
+Extracts information from a .pod file, given a STRING (file name) or a
+GLOB (a file handle).  The result is given back as a hash table.
+
+The additional hash is for extra parameters:
+
+=over
+
+=item B<section =E<gt> N>
+
+The value MUST be a number, and will be the man section number
+to be used with the given .pod file.
+
+=item B<debug =E<gt> 0|1>
+
+If set to 1, extra debug text will be printed on STDERR
+
+=back
+
+=back
+
+=head1 RETURN VALUES
+
+=over
+
+=item B<extract_pod_info> returns a hash table with the following
+items:
+
+=over
+
+=item B<section =E<gt> N>
+
+The man section number this .pod file belongs to.  Often the same as
+was given as input.
+
+=item B<names =E<gt> [ "name", ... ]>
+
+All the names extracted from the NAME section.
+
+=back
+
+=back
+
+=cut
+
+sub extract_pod_info {
+    my $input = shift;
+    my $defaults_ref = shift || {};
+    my %defaults = ( debug => 0, section => 0, %$defaults_ref );
+    my $fh = undef;
+    my $filename = undef;
+
+    # If not a file handle, then it's assume to be a file path (a string)
+    unless (ref $input eq "GLOB") {
+        $filename = $input;
+        open $fh, $input or die "Trying to read $filename: $!\n";
+        print STDERR "DEBUG: Reading $input\n" if $defaults{debug};
+        $input = $fh;
+    }
+
+    my %podinfo = ( section => $defaults{section});
+    while(<$input>) {
+        s|\R$||;
+        # Stop reading when we have reached past the NAME section.
+        last if (m|^=head1|
+                 && defined $podinfo{lastsect}
+                 && $podinfo{lastsect} eq "NAME");
+
+        # Collect the section name
+        if (m|^=head1\s*(.*)|) {
+            $podinfo{lastsect} = $1;
+            $podinfo{lastsect} =~ s/\s+$//;
+            print STDERR "DEBUG: Found new pod section $1\n"
+                if $defaults{debug};
+            print STDERR "DEBUG: Clearing pod section text\n"
+                if $defaults{debug};
+            $podinfo{lastsecttext} = "";
+        }
+
+        next if (m|^=| || m|^\s*$|);
+
+        # Collect the section text
+        print STDERR "DEBUG: accumulating pod section text \"$_\"\n"
+            if $defaults{debug};
+        $podinfo{lastsecttext} .= " " if $podinfo{lastsecttext};
+        $podinfo{lastsecttext} .= $_;
+    }
+
+
+    if (defined $fh) {
+        close $fh;
+        print STDERR "DEBUG: Done reading $filename\n" if $defaults{debug};
+    }
+
+    $podinfo{lastsecttext} =~ s| - .*$||;
+
+    my @names =
+        map { s|\s+||g; $_ }
+        split(m|,|, $podinfo{lastsecttext});
+
+    return ( section => $podinfo{section}, names => [ @names ] );
+}
+
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Alert.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Alert.pm
new file mode 100644
index 0000000..e27497d
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Alert.pm
@@ -0,0 +1,51 @@
+# Copyright 2018-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::Alert;
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $encrypted,
+        $level,
+        $description) = @_;
+
+    my $self = {
+        server => $server,
+        encrypted => $encrypted,
+        level => $level,
+        description => $description
+    };
+
+    return bless $self, $class;
+}
+
+#Read only accessors
+sub server
+{
+    my $self = shift;
+    return $self->{server};
+}
+sub encrypted
+{
+    my $self = shift;
+    return $self->{encrypted};
+}
+sub level
+{
+    my $self = shift;
+    return $self->{level};
+}
+sub description
+{
+    my $self = shift;
+    return $self->{description};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Certificate.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Certificate.pm
new file mode 100644
index 0000000..7373713
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Certificate.pm
@@ -0,0 +1,214 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::Certificate;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        TLSProxy::Message::MT_CERTIFICATE,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    $self->{first_certificate} = "";
+    $self->{extension_data} = "";
+    $self->{remaining_certdata} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+
+    if (TLSProxy::Proxy->is_tls13()) {
+        my $context_len = unpack('C', $self->data);
+        my $context = substr($self->data, 1, $context_len);
+
+        my $remdata = substr($self->data, 1 + $context_len);
+
+        my ($hicertlistlen, $certlistlen) = unpack('Cn', $remdata);
+        $certlistlen += ($hicertlistlen << 16);
+
+        $remdata = substr($remdata, 3);
+
+        die "Invalid Certificate List length"
+            if length($remdata) != $certlistlen;
+
+        my ($hicertlen, $certlen) = unpack('Cn', $remdata);
+        $certlen += ($hicertlen << 16);
+
+        die "Certificate too long" if ($certlen + 3) > $certlistlen;
+
+        $remdata = substr($remdata, 3);
+
+        my $certdata = substr($remdata, 0, $certlen);
+
+        $remdata = substr($remdata, $certlen);
+
+        my $extensions_len = unpack('n', $remdata);
+        $remdata = substr($remdata, 2);
+
+        die "Extensions too long"
+            if ($certlen + 3 + $extensions_len + 2) > $certlistlen;
+
+        my $extension_data = "";
+        if ($extensions_len != 0) {
+            $extension_data = substr($remdata, 0, $extensions_len);
+
+            if (length($extension_data) != $extensions_len) {
+                die "Invalid extension length\n";
+            }
+        }
+        my %extensions = ();
+        while (length($extension_data) >= 4) {
+            my ($type, $size) = unpack("nn", $extension_data);
+            my $extdata = substr($extension_data, 4, $size);
+            $extension_data = substr($extension_data, 4 + $size);
+            $extensions{$type} = $extdata;
+        }
+        $remdata = substr($remdata, $extensions_len);
+
+        $self->context($context);
+        $self->first_certificate($certdata);
+        $self->extension_data(\%extensions);
+        $self->remaining_certdata($remdata);
+
+        print "    Context:".$context."\n";
+        print "    Certificate List Len:".$certlistlen."\n";
+        print "    Certificate Len:".$certlen."\n";
+        print "    Extensions Len:".$extensions_len."\n";
+    } else {
+        my ($hicertlistlen, $certlistlen) = unpack('Cn', $self->data);
+        $certlistlen += ($hicertlistlen << 16);
+
+        my $remdata = substr($self->data, 3);
+
+        die "Invalid Certificate List length"
+            if length($remdata) != $certlistlen;
+
+        my ($hicertlen, $certlen) = unpack('Cn', $remdata);
+        $certlen += ($hicertlen << 16);
+
+        die "Certificate too long" if ($certlen + 3) > $certlistlen;
+
+        $remdata = substr($remdata, 3);
+
+        my $certdata = substr($remdata, 0, $certlen);
+
+        $remdata = substr($remdata, $certlen);
+
+        $self->first_certificate($certdata);
+        $self->remaining_certdata($remdata);
+
+        print "    Certificate List Len:".$certlistlen."\n";
+        print "    Certificate Len:".$certlen."\n";
+    }
+}
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data;
+    my $extensions = "";
+
+    if (TLSProxy::Proxy->is_tls13()) {
+        foreach my $key (keys %{$self->extension_data}) {
+            my $extdata = ${$self->extension_data}{$key};
+            $extensions .= pack("n", $key);
+            $extensions .= pack("n", length($extdata));
+            $extensions .= $extdata;
+        }
+        $data = pack('C', length($self->context()));
+        $data .= $self->context;
+        my $certlen = length($self->first_certificate);
+        my $certlistlen = $certlen + length($extensions)
+                          + length($self->remaining_certdata);
+        my $hi = $certlistlen >> 16;
+        $certlistlen = $certlistlen & 0xffff;
+        $data .= pack('Cn', $hi, $certlistlen);
+        $hi = $certlen >> 16;
+        $certlen = $certlen & 0xffff;
+        $data .= pack('Cn', $hi, $certlen);
+        $data .= pack('n', length($extensions));
+        $data .= $extensions;
+        $data .= $self->remaining_certdata();
+        $self->data($data);
+    } else {
+        my $certlen = length($self->first_certificate);
+        my $certlistlen = $certlen + length($self->remaining_certdata);
+        my $hi = $certlistlen >> 16;
+        $certlistlen = $certlistlen & 0xffff;
+        $data .= pack('Cn', $hi, $certlistlen);
+        $hi = $certlen >> 16;
+        $certlen = $certlen & 0xffff;
+        $data .= pack('Cn', $hi, $certlen);
+        $data .= $self->remaining_certdata();
+        $self->data($data);
+    }
+}
+
+#Read/write accessors
+sub context
+{
+    my $self = shift;
+    if (@_) {
+      $self->{context} = shift;
+    }
+    return $self->{context};
+}
+sub first_certificate
+{
+    my $self = shift;
+    if (@_) {
+      $self->{first_certificate} = shift;
+    }
+    return $self->{first_certificate};
+}
+sub remaining_certdata
+{
+    my $self = shift;
+    if (@_) {
+      $self->{remaining_certdata} = shift;
+    }
+    return $self->{remaining_certdata};
+}
+sub extension_data
+{
+    my $self = shift;
+    if (@_) {
+      $self->{extension_data} = shift;
+    }
+    return $self->{extension_data};
+}
+sub set_extension
+{
+    my ($self, $ext_type, $ext_data) = @_;
+    $self->{extension_data}{$ext_type} = $ext_data;
+}
+sub delete_extension
+{
+    my ($self, $ext_type) = @_;
+    delete $self->{extension_data}{$ext_type};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/CertificateRequest.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/CertificateRequest.pm
new file mode 100644
index 0000000..bc41053
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/CertificateRequest.pm
@@ -0,0 +1,105 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::CertificateRequest;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        TLSProxy::Message::MT_CERTIFICATE_REQUEST,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    $self->{extension_data} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+    my $ptr = 1;
+
+    if (TLSProxy::Proxy->is_tls13()) {
+        my $request_ctx_len = unpack('C', $self->data);
+        my $request_ctx = substr($self->data, $ptr, $request_ctx_len);
+        $ptr += $request_ctx_len;
+
+        my $extensions_len = unpack('n', substr($self->data, $ptr));
+        $ptr += 2;
+        my $extension_data = substr($self->data, $ptr);
+        if (length($extension_data) != $extensions_len) {
+            die "Invalid extension length\n";
+        }
+        my %extensions = ();
+        while (length($extension_data) >= 4) {
+            my ($type, $size) = unpack("nn", $extension_data);
+            my $extdata = substr($extension_data, 4, $size);
+            $extension_data = substr($extension_data, 4 + $size);
+            $extensions{$type} = $extdata;
+        }
+        $self->extension_data(\%extensions);
+
+        print "    Extensions Len:".$extensions_len."\n";
+    }
+    # else parse TLSv1.2 version - we don't support that at the moment
+}
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data;
+    my $extensions = "";
+
+    foreach my $key (keys %{$self->extension_data}) {
+        my $extdata = ${$self->extension_data}{$key};
+        $extensions .= pack("n", $key);
+        $extensions .= pack("n", length($extdata));
+        $extensions .= $extdata;
+    }
+
+    $data = pack('n', length($extensions));
+    $data .= $extensions;
+    $self->data($data);
+}
+
+#Read/write accessors
+sub extension_data
+{
+    my $self = shift;
+    if (@_) {
+        $self->{extension_data} = shift;
+    }
+    return $self->{extension_data};
+}
+sub set_extension
+{
+    my ($self, $ext_type, $ext_data) = @_;
+    $self->{extension_data}{$ext_type} = $ext_data;
+}
+sub delete_extension
+{
+    my ($self, $ext_type) = @_;
+    delete $self->{extension_data}{$ext_type};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/CertificateVerify.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/CertificateVerify.pm
new file mode 100644
index 0000000..8bf969f
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/CertificateVerify.pm
@@ -0,0 +1,96 @@
+# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::CertificateVerify;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        TLSProxy::Message::MT_CERTIFICATE_VERIFY,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    $self->{sigalg} = -1;
+    $self->{signature} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+
+    my $sigalg = -1;
+    my $remdata = $self->data;
+    my $record = ${$self->records}[0];
+
+    if (TLSProxy::Proxy->is_tls13()
+            || $record->version() == TLSProxy::Record::VERS_TLS_1_2) {
+        $sigalg = unpack('n', $remdata);
+        $remdata = substr($remdata, 2);
+    }
+
+    my $siglen = unpack('n', substr($remdata, 0, 2));
+    my $sig = substr($remdata, 2);
+
+    die "Invalid CertificateVerify signature length" if length($sig) != $siglen;
+
+    print "    SigAlg:".$sigalg."\n";
+    print "    Signature Len:".$siglen."\n";
+
+    $self->sigalg($sigalg);
+    $self->signature($sig);
+}
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data = "";
+    my $sig = $self->signature();
+    my $olddata = $self->data();
+
+    $data .= pack("n", $self->sigalg()) if ($self->sigalg() != -1);
+    $data .= pack("n", length($sig));
+    $data .= $sig;
+
+    $self->data($data);
+}
+
+#Read/write accessors
+sub sigalg
+{
+    my $self = shift;
+    if (@_) {
+      $self->{sigalg} = shift;
+    }
+    return $self->{sigalg};
+}
+sub signature
+{
+    my $self = shift;
+    if (@_) {
+      $self->{signature} = shift;
+    }
+    return $self->{signature};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ClientHello.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ClientHello.pm
new file mode 100644
index 0000000..76dce74
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ClientHello.pm
@@ -0,0 +1,258 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::ClientHello;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        1,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    $self->{client_version} = 0;
+    $self->{random} = [];
+    $self->{session_id_len} = 0;
+    $self->{session} = "";
+    $self->{ciphersuite_len} = 0;
+    $self->{ciphersuites} = [];
+    $self->{comp_meth_len} = 0;
+    $self->{comp_meths} = [];
+    $self->{extensions_len} = 0;
+    $self->{extension_data} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+    my $ptr = 2;
+    my ($client_version) = unpack('n', $self->data);
+    my $random = substr($self->data, $ptr, 32);
+    $ptr += 32;
+    my $session_id_len = unpack('C', substr($self->data, $ptr));
+    $ptr++;
+    my $session = substr($self->data, $ptr, $session_id_len);
+    $ptr += $session_id_len;
+    my $ciphersuite_len = unpack('n', substr($self->data, $ptr));
+    $ptr += 2;
+    my @ciphersuites = unpack('n*', substr($self->data, $ptr,
+                                           $ciphersuite_len));
+    $ptr += $ciphersuite_len;
+    my $comp_meth_len = unpack('C', substr($self->data, $ptr));
+    $ptr++;
+    my @comp_meths = unpack('C*', substr($self->data, $ptr, $comp_meth_len));
+    $ptr += $comp_meth_len;
+    my $extensions_len = unpack('n', substr($self->data, $ptr));
+    $ptr += 2;
+    #For now we just deal with this as a block of data. In the future we will
+    #want to parse this
+    my $extension_data = substr($self->data, $ptr);
+
+    if (length($extension_data) != $extensions_len) {
+        die "Invalid extension length\n";
+    }
+    my %extensions = ();
+    while (length($extension_data) >= 4) {
+        my ($type, $size) = unpack("nn", $extension_data);
+        my $extdata = substr($extension_data, 4, $size);
+        $extension_data = substr($extension_data, 4 + $size);
+        $extensions{$type} = $extdata;
+    }
+
+    $self->client_version($client_version);
+    $self->random($random);
+    $self->session_id_len($session_id_len);
+    $self->session($session);
+    $self->ciphersuite_len($ciphersuite_len);
+    $self->ciphersuites(\@ciphersuites);
+    $self->comp_meth_len($comp_meth_len);
+    $self->comp_meths(\@comp_meths);
+    $self->extensions_len($extensions_len);
+    $self->extension_data(\%extensions);
+
+    $self->process_extensions();
+
+    print "    Client Version:".$client_version."\n";
+    print "    Session ID Len:".$session_id_len."\n";
+    print "    Ciphersuite len:".$ciphersuite_len."\n";
+    print "    Compression Method Len:".$comp_meth_len."\n";
+    print "    Extensions Len:".$extensions_len."\n";
+}
+
+#Perform any actions necessary based on the extensions we've seen
+sub process_extensions
+{
+    my $self = shift;
+    my %extensions = %{$self->extension_data};
+
+    #Clear any state from a previous run
+    TLSProxy::Record->etm(0);
+
+    if (exists $extensions{TLSProxy::Message::EXT_ENCRYPT_THEN_MAC}) {
+        TLSProxy::Record->etm(1);
+    }
+}
+
+sub extension_contents
+{
+    my $self = shift;
+    my $key = shift;
+    my $extension = "";
+
+    my $extdata = ${$self->extension_data}{$key};
+    $extension .= pack("n", $key);
+    $extension .= pack("n", length($extdata));
+    $extension .= $extdata;
+    return $extension;
+}
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data;
+    my $extensions = "";
+
+    $data = pack('n', $self->client_version);
+    $data .= $self->random;
+    $data .= pack('C', $self->session_id_len);
+    $data .= $self->session;
+    $data .= pack('n', $self->ciphersuite_len);
+    $data .= pack("n*", @{$self->ciphersuites});
+    $data .= pack('C', $self->comp_meth_len);
+    $data .= pack("C*", @{$self->comp_meths});
+
+    foreach my $key (keys %{$self->extension_data}) {
+        next if ($key == TLSProxy::Message::EXT_PSK);
+        $extensions .= $self->extension_contents($key);
+        #Add extension twice if we are duplicating that extension
+        $extensions .= $self->extension_contents($key) if ($key == $self->dupext);
+    }
+    #PSK extension always goes last...
+    if (defined ${$self->extension_data}{TLSProxy::Message::EXT_PSK}) {
+        $extensions .= $self->extension_contents(TLSProxy::Message::EXT_PSK);
+    }
+    #unless we have EXT_FORCE_LAST
+    if (defined ${$self->extension_data}{TLSProxy::Message::EXT_FORCE_LAST}) {
+        $extensions .= $self->extension_contents(TLSProxy::Message::EXT_FORCE_LAST);
+    }
+
+    $data .= pack('n', length($extensions));
+    $data .= $extensions;
+
+    $self->data($data);
+}
+
+#Read/write accessors
+sub client_version
+{
+    my $self = shift;
+    if (@_) {
+      $self->{client_version} = shift;
+    }
+    return $self->{client_version};
+}
+sub random
+{
+    my $self = shift;
+    if (@_) {
+      $self->{random} = shift;
+    }
+    return $self->{random};
+}
+sub session_id_len
+{
+    my $self = shift;
+    if (@_) {
+      $self->{session_id_len} = shift;
+    }
+    return $self->{session_id_len};
+}
+sub session
+{
+    my $self = shift;
+    if (@_) {
+      $self->{session} = shift;
+    }
+    return $self->{session};
+}
+sub ciphersuite_len
+{
+    my $self = shift;
+    if (@_) {
+      $self->{ciphersuite_len} = shift;
+    }
+    return $self->{ciphersuite_len};
+}
+sub ciphersuites
+{
+    my $self = shift;
+    if (@_) {
+      $self->{ciphersuites} = shift;
+    }
+    return $self->{ciphersuites};
+}
+sub comp_meth_len
+{
+    my $self = shift;
+    if (@_) {
+      $self->{comp_meth_len} = shift;
+    }
+    return $self->{comp_meth_len};
+}
+sub comp_meths
+{
+    my $self = shift;
+    if (@_) {
+      $self->{comp_meths} = shift;
+    }
+    return $self->{comp_meths};
+}
+sub extensions_len
+{
+    my $self = shift;
+    if (@_) {
+      $self->{extensions_len} = shift;
+    }
+    return $self->{extensions_len};
+}
+sub extension_data
+{
+    my $self = shift;
+    if (@_) {
+      $self->{extension_data} = shift;
+    }
+    return $self->{extension_data};
+}
+sub set_extension
+{
+    my ($self, $ext_type, $ext_data) = @_;
+    $self->{extension_data}{$ext_type} = $ext_data;
+}
+sub delete_extension
+{
+    my ($self, $ext_type) = @_;
+    delete $self->{extension_data}{$ext_type};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/EncryptedExtensions.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/EncryptedExtensions.pm
new file mode 100644
index 0000000..262b720
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/EncryptedExtensions.pm
@@ -0,0 +1,110 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::EncryptedExtensions;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    $self->{extension_data} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+
+    my $extensions_len = unpack('n', $self->data);
+    if (!defined $extensions_len) {
+        $extensions_len = 0;
+    }
+
+    my $extension_data;
+    if ($extensions_len != 0) {
+        $extension_data = substr($self->data, 2);
+
+        if (length($extension_data) != $extensions_len) {
+            die "Invalid extension length\n";
+        }
+    } else {
+        if (length($self->data) != 2) {
+            die "Invalid extension length\n";
+        }
+        $extension_data = "";
+    }
+    my %extensions = ();
+    while (length($extension_data) >= 4) {
+        my ($type, $size) = unpack("nn", $extension_data);
+        my $extdata = substr($extension_data, 4, $size);
+        $extension_data = substr($extension_data, 4 + $size);
+        $extensions{$type} = $extdata;
+    }
+
+    $self->extension_data(\%extensions);
+
+    print "    Extensions Len:".$extensions_len."\n";
+}
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data;
+    my $extensions = "";
+
+    foreach my $key (keys %{$self->extension_data}) {
+        my $extdata = ${$self->extension_data}{$key};
+        $extensions .= pack("n", $key);
+        $extensions .= pack("n", length($extdata));
+        $extensions .= $extdata;
+    }
+
+    $data = pack('n', length($extensions));
+    $data .= $extensions;
+    $self->data($data);
+}
+
+#Read/write accessors
+sub extension_data
+{
+    my $self = shift;
+    if (@_) {
+        $self->{extension_data} = shift;
+    }
+    return $self->{extension_data};
+}
+sub set_extension
+{
+    my ($self, $ext_type, $ext_data) = @_;
+    $self->{extension_data}{$ext_type} = $ext_data;
+}
+sub delete_extension
+{
+    my ($self, $ext_type) = @_;
+    delete $self->{extension_data}{$ext_type};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Message.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Message.pm
new file mode 100644
index 0000000..c3c4806
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Message.pm
@@ -0,0 +1,629 @@
+# Copyright 2016-2021 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::Message;
+
+use TLSProxy::Alert;
+
+use constant TLS_MESSAGE_HEADER_LENGTH => 4;
+
+#Message types
+use constant {
+    MT_HELLO_REQUEST => 0,
+    MT_CLIENT_HELLO => 1,
+    MT_SERVER_HELLO => 2,
+    MT_NEW_SESSION_TICKET => 4,
+    MT_ENCRYPTED_EXTENSIONS => 8,
+    MT_CERTIFICATE => 11,
+    MT_SERVER_KEY_EXCHANGE => 12,
+    MT_CERTIFICATE_REQUEST => 13,
+    MT_SERVER_HELLO_DONE => 14,
+    MT_CERTIFICATE_VERIFY => 15,
+    MT_CLIENT_KEY_EXCHANGE => 16,
+    MT_FINISHED => 20,
+    MT_CERTIFICATE_STATUS => 22,
+    MT_NEXT_PROTO => 67
+};
+
+#Alert levels
+use constant {
+    AL_LEVEL_WARN => 1,
+    AL_LEVEL_FATAL => 2
+};
+
+#Alert descriptions
+use constant {
+    AL_DESC_CLOSE_NOTIFY => 0,
+    AL_DESC_UNEXPECTED_MESSAGE => 10,
+    AL_DESC_ILLEGAL_PARAMETER => 47,
+    AL_DESC_NO_RENEGOTIATION => 100
+};
+
+my %message_type = (
+    MT_HELLO_REQUEST, "HelloRequest",
+    MT_CLIENT_HELLO, "ClientHello",
+    MT_SERVER_HELLO, "ServerHello",
+    MT_NEW_SESSION_TICKET, "NewSessionTicket",
+    MT_ENCRYPTED_EXTENSIONS, "EncryptedExtensions",
+    MT_CERTIFICATE, "Certificate",
+    MT_SERVER_KEY_EXCHANGE, "ServerKeyExchange",
+    MT_CERTIFICATE_REQUEST, "CertificateRequest",
+    MT_SERVER_HELLO_DONE, "ServerHelloDone",
+    MT_CERTIFICATE_VERIFY, "CertificateVerify",
+    MT_CLIENT_KEY_EXCHANGE, "ClientKeyExchange",
+    MT_FINISHED, "Finished",
+    MT_CERTIFICATE_STATUS, "CertificateStatus",
+    MT_NEXT_PROTO, "NextProto"
+);
+
+use constant {
+    EXT_SERVER_NAME => 0,
+    EXT_MAX_FRAGMENT_LENGTH => 1,
+    EXT_STATUS_REQUEST => 5,
+    EXT_SUPPORTED_GROUPS => 10,
+    EXT_EC_POINT_FORMATS => 11,
+    EXT_SRP => 12,
+    EXT_SIG_ALGS => 13,
+    EXT_USE_SRTP => 14,
+    EXT_ALPN => 16,
+    EXT_SCT => 18,
+    EXT_PADDING => 21,
+    EXT_ENCRYPT_THEN_MAC => 22,
+    EXT_EXTENDED_MASTER_SECRET => 23,
+    EXT_SESSION_TICKET => 35,
+    EXT_KEY_SHARE => 51,
+    EXT_PSK => 41,
+    EXT_SUPPORTED_VERSIONS => 43,
+    EXT_COOKIE => 44,
+    EXT_PSK_KEX_MODES => 45,
+    EXT_POST_HANDSHAKE_AUTH => 49,
+    EXT_SIG_ALGS_CERT => 50,
+    EXT_RENEGOTIATE => 65281,
+    EXT_NPN => 13172,
+    EXT_CRYPTOPRO_BUG_EXTENSION => 0xfde8,
+    EXT_UNKNOWN => 0xfffe,
+    #Unknown extension that should appear last
+    EXT_FORCE_LAST => 0xffff
+};
+
+# SignatureScheme of TLS 1.3 from:
+# https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-signaturescheme
+# We have to manually grab the SHA224 equivalents from the old registry
+use constant {
+    SIG_ALG_RSA_PKCS1_SHA256 => 0x0401,
+    SIG_ALG_RSA_PKCS1_SHA384 => 0x0501,
+    SIG_ALG_RSA_PKCS1_SHA512 => 0x0601,
+    SIG_ALG_ECDSA_SECP256R1_SHA256 => 0x0403,
+    SIG_ALG_ECDSA_SECP384R1_SHA384 => 0x0503,
+    SIG_ALG_ECDSA_SECP521R1_SHA512 => 0x0603,
+    SIG_ALG_RSA_PSS_RSAE_SHA256 => 0x0804,
+    SIG_ALG_RSA_PSS_RSAE_SHA384 => 0x0805,
+    SIG_ALG_RSA_PSS_RSAE_SHA512 => 0x0806,
+    SIG_ALG_ED25519 => 0x0807,
+    SIG_ALG_ED448 => 0x0808,
+    SIG_ALG_RSA_PSS_PSS_SHA256 => 0x0809,
+    SIG_ALG_RSA_PSS_PSS_SHA384 => 0x080a,
+    SIG_ALG_RSA_PSS_PSS_SHA512 => 0x080b,
+    SIG_ALG_RSA_PKCS1_SHA1 => 0x0201,
+    SIG_ALG_ECDSA_SHA1 => 0x0203,
+    SIG_ALG_DSA_SHA1 => 0x0202,
+    SIG_ALG_DSA_SHA256 => 0x0402,
+    SIG_ALG_DSA_SHA384 => 0x0502,
+    SIG_ALG_DSA_SHA512 => 0x0602,
+    OSSL_SIG_ALG_RSA_PKCS1_SHA224 => 0x0301,
+    OSSL_SIG_ALG_DSA_SHA224 => 0x0302,
+    OSSL_SIG_ALG_ECDSA_SHA224 => 0x0303
+};
+
+use constant {
+    CIPHER_RSA_WITH_AES_128_CBC_SHA => 0x002f,
+    CIPHER_DHE_RSA_AES_128_SHA => 0x0033,
+    CIPHER_ADH_AES_128_SHA => 0x0034,
+    CIPHER_TLS13_AES_128_GCM_SHA256 => 0x1301,
+    CIPHER_TLS13_AES_256_GCM_SHA384 => 0x1302
+};
+
+use constant {
+    CLIENT => 0,
+    SERVER => 1
+};
+
+my $payload = "";
+my $messlen = -1;
+my $mt;
+my $startoffset = -1;
+my $server = 0;
+my $success = 0;
+my $end = 0;
+my @message_rec_list = ();
+my @message_frag_lens = ();
+my $ciphersuite = 0;
+my $successondata = 0;
+my $alert;
+
+sub clear
+{
+    $payload = "";
+    $messlen = -1;
+    $startoffset = -1;
+    $server = 0;
+    $success = 0;
+    $end = 0;
+    $successondata = 0;
+    @message_rec_list = ();
+    @message_frag_lens = ();
+    $alert = undef;
+}
+
+#Class method to extract messages from a record
+sub get_messages
+{
+    my $class = shift;
+    my $serverin = shift;
+    my $record = shift;
+    my @messages = ();
+    my $message;
+
+    @message_frag_lens = ();
+
+    if ($serverin != $server && length($payload) != 0) {
+        die "Changed peer, but we still have fragment data\n";
+    }
+    $server = $serverin;
+
+    if ($record->content_type == TLSProxy::Record::RT_CCS) {
+        if ($payload ne "") {
+            #We can't handle this yet
+            die "CCS received before message data complete\n";
+        }
+        if (!TLSProxy::Proxy->is_tls13()) {
+            if ($server) {
+                TLSProxy::Record->server_encrypting(1);
+            } else {
+                TLSProxy::Record->client_encrypting(1);
+            }
+        }
+    } elsif ($record->content_type == TLSProxy::Record::RT_HANDSHAKE) {
+        if ($record->len == 0 || $record->len_real == 0) {
+            print "  Message truncated\n";
+        } else {
+            my $recoffset = 0;
+
+            if (length $payload > 0) {
+                #We are continuing processing a message started in a previous
+                #record. Add this record to the list associated with this
+                #message
+                push @message_rec_list, $record;
+
+                if ($messlen <= length($payload)) {
+                    #Shouldn't happen
+                    die "Internal error: invalid messlen: ".$messlen
+                        ." payload length:".length($payload)."\n";
+                }
+                if (length($payload) + $record->decrypt_len >= $messlen) {
+                    #We can complete the message with this record
+                    $recoffset = $messlen - length($payload);
+                    $payload .= substr($record->decrypt_data, 0, $recoffset);
+                    push @message_frag_lens, $recoffset;
+                    $message = create_message($server, $mt, $payload,
+                                              $startoffset);
+                    push @messages, $message;
+
+                    $payload = "";
+                } else {
+                    #This is just part of the total message
+                    $payload .= $record->decrypt_data;
+                    $recoffset = $record->decrypt_len;
+                    push @message_frag_lens, $record->decrypt_len;
+                }
+                print "  Partial message data read: ".$recoffset." bytes\n";
+            }
+
+            while ($record->decrypt_len > $recoffset) {
+                #We are at the start of a new message
+                if ($record->decrypt_len - $recoffset < 4) {
+                    #Whilst technically probably valid we can't cope with this
+                    die "End of record in the middle of a message header\n";
+                }
+                @message_rec_list = ($record);
+                my $lenhi;
+                my $lenlo;
+                ($mt, $lenhi, $lenlo) = unpack('CnC',
+                                               substr($record->decrypt_data,
+                                                      $recoffset));
+                $messlen = ($lenhi << 8) | $lenlo;
+                print "  Message type: $message_type{$mt}\n";
+                print "  Message Length: $messlen\n";
+                $startoffset = $recoffset;
+                $recoffset += 4;
+                $payload = "";
+
+                if ($recoffset <= $record->decrypt_len) {
+                    #Some payload data is present in this record
+                    if ($record->decrypt_len - $recoffset >= $messlen) {
+                        #We can complete the message with this record
+                        $payload .= substr($record->decrypt_data, $recoffset,
+                                           $messlen);
+                        $recoffset += $messlen;
+                        push @message_frag_lens, $messlen;
+                        $message = create_message($server, $mt, $payload,
+                                                  $startoffset);
+                        push @messages, $message;
+
+                        $payload = "";
+                    } else {
+                        #This is just part of the total message
+                        $payload .= substr($record->decrypt_data, $recoffset,
+                                           $record->decrypt_len - $recoffset);
+                        $recoffset = $record->decrypt_len;
+                        push @message_frag_lens, $recoffset;
+                    }
+                }
+            }
+        }
+    } elsif ($record->content_type == TLSProxy::Record::RT_APPLICATION_DATA) {
+        print "  [ENCRYPTED APPLICATION DATA]\n";
+        print "  [".$record->decrypt_data."]\n";
+
+        if ($successondata) {
+            $success = 1;
+            $end = 1;
+        }
+    } elsif ($record->content_type == TLSProxy::Record::RT_ALERT) {
+        my ($alertlev, $alertdesc) = unpack('CC', $record->decrypt_data);
+        print "  [$alertlev, $alertdesc]\n";
+        #A CloseNotify from the client indicates we have finished successfully
+        #(we assume)
+        if (!$end && !$server && $alertlev == AL_LEVEL_WARN
+            && $alertdesc == AL_DESC_CLOSE_NOTIFY) {
+            $success = 1;
+        }
+        #Fatal or close notify alerts end the test
+        if ($alertlev == AL_LEVEL_FATAL || $alertdesc == AL_DESC_CLOSE_NOTIFY) {
+            $end = 1;
+        }
+        $alert = TLSProxy::Alert->new(
+            $server,
+            $record->encrypted,
+            $alertlev,
+            $alertdesc);
+    }
+
+    return @messages;
+}
+
+#Function to work out which sub-class we need to create and then
+#construct it
+sub create_message
+{
+    my ($server, $mt, $data, $startoffset) = @_;
+    my $message;
+
+    #We only support ClientHello in this version...needs to be extended for
+    #others
+    if ($mt == MT_CLIENT_HELLO) {
+        $message = TLSProxy::ClientHello->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } elsif ($mt == MT_SERVER_HELLO) {
+        $message = TLSProxy::ServerHello->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } elsif ($mt == MT_ENCRYPTED_EXTENSIONS) {
+        $message = TLSProxy::EncryptedExtensions->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } elsif ($mt == MT_CERTIFICATE) {
+        $message = TLSProxy::Certificate->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } elsif ($mt == MT_CERTIFICATE_REQUEST) {
+        $message = TLSProxy::CertificateRequest->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } elsif ($mt == MT_CERTIFICATE_VERIFY) {
+        $message = TLSProxy::CertificateVerify->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } elsif ($mt == MT_SERVER_KEY_EXCHANGE) {
+        $message = TLSProxy::ServerKeyExchange->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } elsif ($mt == MT_NEW_SESSION_TICKET) {
+        $message = TLSProxy::NewSessionTicket->new(
+            $server,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+        $message->parse();
+    } else {
+        #Unknown message type
+        $message = TLSProxy::Message->new(
+            $server,
+            $mt,
+            $data,
+            [@message_rec_list],
+            $startoffset,
+            [@message_frag_lens]
+        );
+    }
+
+    return $message;
+}
+
+sub end
+{
+    my $class = shift;
+    return $end;
+}
+sub success
+{
+    my $class = shift;
+    return $success;
+}
+sub fail
+{
+    my $class = shift;
+    return !$success && $end;
+}
+
+sub alert
+{
+    return $alert;
+}
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $mt,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = {
+        server => $server,
+        data => $data,
+        records => $records,
+        mt => $mt,
+        startoffset => $startoffset,
+        message_frag_lens => $message_frag_lens,
+        dupext => -1
+    };
+
+    return bless $self, $class;
+}
+
+sub ciphersuite
+{
+    my $class = shift;
+    if (@_) {
+      $ciphersuite = shift;
+    }
+    return $ciphersuite;
+}
+
+#Update all the underlying records with the modified data from this message
+#Note: Only supports TLSv1.3 and ETM encryption
+sub repack
+{
+    my $self = shift;
+    my $msgdata;
+
+    my $numrecs = $#{$self->records};
+
+    $self->set_message_contents();
+
+    my $lenhi;
+    my $lenlo;
+
+    $lenlo = length($self->data) & 0xff;
+    $lenhi = length($self->data) >> 8;
+    $msgdata = pack('CnC', $self->mt, $lenhi, $lenlo).$self->data;
+
+    if ($numrecs == 0) {
+        #The message is fully contained within one record
+        my ($rec) = @{$self->records};
+        my $recdata = $rec->decrypt_data;
+
+        my $old_length;
+
+        # We use empty message_frag_lens to indicates that pre-repacking,
+        # the message wasn't present. The first fragment length doesn't include
+        # the TLS header, so we need to check and compute the right length.
+        if (@{$self->message_frag_lens}) {
+            $old_length = ${$self->message_frag_lens}[0] +
+              TLS_MESSAGE_HEADER_LENGTH;
+        } else {
+            $old_length = 0;
+        }
+
+        my $prefix = substr($recdata, 0, $self->startoffset);
+        my $suffix = substr($recdata, $self->startoffset + $old_length);
+
+        $rec->decrypt_data($prefix.($msgdata).($suffix));
+        # TODO(openssl-team): don't keep explicit lengths.
+        # (If a length override is ever needed to construct invalid packets,
+        #  use an explicit override field instead.)
+        $rec->decrypt_len(length($rec->decrypt_data));
+        # Only support re-encryption for TLSv1.3 and ETM.
+        if ($rec->encrypted()) {
+            if (TLSProxy::Proxy->is_tls13()) {
+                #Add content type (1 byte) and 16 tag bytes
+                $rec->data($rec->decrypt_data
+                    .pack("C", TLSProxy::Record::RT_HANDSHAKE).("\0"x16));
+            } elsif ($rec->etm()) {
+                my $data = $rec->decrypt_data;
+                #Add padding
+                my $padval = length($data) % 16;
+                $padval = 15 - $padval;
+                for (0..$padval) {
+                    $data .= pack("C", $padval);
+                }
+
+                #Add MAC. Assumed to be 20 bytes
+                foreach my $macval (0..19) {
+                    $data .= pack("C", $macval);
+                }
+
+                if ($rec->version() >= TLSProxy::Record::VERS_TLS_1_1) {
+                    #Explicit IV
+                    $data = ("\0"x16).$data;
+                }
+                $rec->data($data);
+            } else {
+                die "Unsupported encryption: No ETM";
+            }
+        } else {
+            $rec->data($rec->decrypt_data);
+        }
+        $rec->len(length($rec->data));
+
+        #Update the fragment len in case we changed it above
+        ${$self->message_frag_lens}[0] = length($msgdata)
+                                         - TLS_MESSAGE_HEADER_LENGTH;
+        return;
+    }
+
+    #Note we don't currently support changing a fragmented message length
+    my $recctr = 0;
+    my $datadone = 0;
+    foreach my $rec (@{$self->records}) {
+        my $recdata = $rec->decrypt_data;
+        if ($recctr == 0) {
+            #This is the first record
+            my $remainlen = length($recdata) - $self->startoffset;
+            $rec->data(substr($recdata, 0, $self->startoffset)
+                       .substr(($msgdata), 0, $remainlen));
+            $datadone += $remainlen;
+        } elsif ($recctr + 1 == $numrecs) {
+            #This is the last record
+            $rec->data(substr($msgdata, $datadone));
+        } else {
+            #This is a middle record
+            $rec->data(substr($msgdata, $datadone, length($rec->data)));
+            $datadone += length($rec->data);
+        }
+        $recctr++;
+    }
+}
+
+#To be overridden by sub-classes
+sub set_message_contents
+{
+}
+
+#Read only accessors
+sub server
+{
+    my $self = shift;
+    return $self->{server};
+}
+
+#Read/write accessors
+sub mt
+{
+    my $self = shift;
+    if (@_) {
+      $self->{mt} = shift;
+    }
+    return $self->{mt};
+}
+sub data
+{
+    my $self = shift;
+    if (@_) {
+      $self->{data} = shift;
+    }
+    return $self->{data};
+}
+sub records
+{
+    my $self = shift;
+    if (@_) {
+      $self->{records} = shift;
+    }
+    return $self->{records};
+}
+sub startoffset
+{
+    my $self = shift;
+    if (@_) {
+      $self->{startoffset} = shift;
+    }
+    return $self->{startoffset};
+}
+sub message_frag_lens
+{
+    my $self = shift;
+    if (@_) {
+      $self->{message_frag_lens} = shift;
+    }
+    return $self->{message_frag_lens};
+}
+sub encoded_length
+{
+    my $self = shift;
+    return TLS_MESSAGE_HEADER_LENGTH + length($self->data);
+}
+sub dupext
+{
+    my $self = shift;
+    if (@_) {
+        $self->{dupext} = shift;
+    }
+    return $self->{dupext};
+}
+sub successondata
+{
+    my $class = shift;
+    if (@_) {
+        $successondata = shift;
+    }
+    return $successondata;
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/NewSessionTicket.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/NewSessionTicket.pm
new file mode 100644
index 0000000..e509985
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/NewSessionTicket.pm
@@ -0,0 +1,81 @@
+# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::NewSessionTicket;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        TLSProxy::Message::MT_NEW_SESSION_TICKET,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    $self->{ticket_lifetime_hint} = 0;
+    $self->{ticket} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+
+    my $ticket_lifetime_hint = unpack('N', $self->data);
+    my $ticket_len = unpack('n', $self->data);
+    my $ticket = substr($self->data, 6, $ticket_len);
+
+    $self->ticket_lifetime_hint($ticket_lifetime_hint);
+    $self->ticket($ticket);
+}
+
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data;
+
+    $data = pack('N', $self->ticket_lifetime_hint);
+    $data .= pack('n', length($self->ticket));
+    $data .= $self->ticket;
+
+    $self->data($data);
+}
+
+#Read/write accessors
+sub ticket_lifetime_hint
+{
+    my $self = shift;
+    if (@_) {
+      $self->{ticket_lifetime_hint} = shift;
+    }
+    return $self->{ticket_lifetime_hint};
+}
+sub ticket
+{
+    my $self = shift;
+    if (@_) {
+      $self->{ticket} = shift;
+    }
+    return $self->{ticket};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Proxy.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Proxy.pm
new file mode 100644
index 0000000..6f983b3
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Proxy.pm
@@ -0,0 +1,729 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+use POSIX ":sys_wait_h";
+
+package TLSProxy::Proxy;
+
+use File::Spec;
+use IO::Socket;
+use IO::Select;
+use TLSProxy::Record;
+use TLSProxy::Message;
+use TLSProxy::ClientHello;
+use TLSProxy::ServerHello;
+use TLSProxy::EncryptedExtensions;
+use TLSProxy::Certificate;
+use TLSProxy::CertificateRequest;
+use TLSProxy::CertificateVerify;
+use TLSProxy::ServerKeyExchange;
+use TLSProxy::NewSessionTicket;
+
+my $have_IPv6;
+my $IP_factory;
+
+BEGIN
+{
+    # IO::Socket::IP is on the core module list, IO::Socket::INET6 isn't.
+    # However, IO::Socket::INET6 is older and is said to be more widely
+    # deployed for the moment, and may have less bugs, so we try the latter
+    # first, then fall back on the core modules.  Worst case scenario, we
+    # fall back to IO::Socket::INET, only supports IPv4.
+    eval {
+        require IO::Socket::INET6;
+        my $s = IO::Socket::INET6->new(
+            LocalAddr => "::1",
+            LocalPort => 0,
+            Listen=>1,
+            );
+        $s or die "\n";
+        $s->close();
+    };
+    if ($@ eq "") {
+        $IP_factory = sub { IO::Socket::INET6->new(Domain => AF_INET6, @_); };
+        $have_IPv6 = 1;
+    } else {
+        eval {
+            require IO::Socket::IP;
+            my $s = IO::Socket::IP->new(
+                LocalAddr => "::1",
+                LocalPort => 0,
+                Listen=>1,
+                );
+            $s or die "\n";
+            $s->close();
+        };
+        if ($@ eq "") {
+            $IP_factory = sub { IO::Socket::IP->new(@_); };
+            $have_IPv6 = 1;
+        } else {
+            $IP_factory = sub { IO::Socket::INET->new(@_); };
+            $have_IPv6 = 0;
+        }
+    }
+}
+
+my $is_tls13 = 0;
+my $ciphersuite = undef;
+
+sub new
+{
+    my $class = shift;
+    my ($filter,
+        $execute,
+        $cert,
+        $debug) = @_;
+
+    my $self = {
+        #Public read/write
+        proxy_addr => $have_IPv6 ? "[::1]" : "127.0.0.1",
+        filter => $filter,
+        serverflags => "",
+        clientflags => "",
+        serverconnects => 1,
+        reneg => 0,
+        sessionfile => undef,
+
+        #Public read
+        proxy_port => 0,
+        server_port => 0,
+        serverpid => 0,
+        clientpid => 0,
+        execute => $execute,
+        cert => $cert,
+        debug => $debug,
+        cipherc => "",
+        ciphersuitesc => "",
+        ciphers => "AES128-SHA",
+        ciphersuitess => "TLS_AES_128_GCM_SHA256",
+        flight => -1,
+        direction => -1,
+        partial => ["", ""],
+        record_list => [],
+        message_list => [],
+    };
+
+    # Create the Proxy socket
+    my $proxaddr = $self->{proxy_addr};
+    $proxaddr =~ s/[\[\]]//g; # Remove [ and ]
+    my @proxyargs = (
+        LocalHost   => $proxaddr,
+        LocalPort   => 0,
+        Proto       => "tcp",
+        Listen      => SOMAXCONN,
+       );
+
+    if (my $sock = $IP_factory->(@proxyargs)) {
+        $self->{proxy_sock} = $sock;
+        $self->{proxy_port} = $sock->sockport();
+        $self->{proxy_addr} = $sock->sockhost();
+        $self->{proxy_addr} =~ s/(.*:.*)/[$1]/;
+        print "Proxy started on port ",
+              "$self->{proxy_addr}:$self->{proxy_port}\n";
+        # use same address for s_server
+        $self->{server_addr} = $self->{proxy_addr};
+    } else {
+        warn "Failed creating proxy socket (".$proxaddr.",0): $!\n";
+    }
+
+    return bless $self, $class;
+}
+
+sub DESTROY
+{
+    my $self = shift;
+
+    $self->{proxy_sock}->close() if $self->{proxy_sock};
+}
+
+sub clearClient
+{
+    my $self = shift;
+
+    $self->{cipherc} = "";
+    $self->{ciphersuitec} = "";
+    $self->{flight} = -1;
+    $self->{direction} = -1;
+    $self->{partial} = ["", ""];
+    $self->{record_list} = [];
+    $self->{message_list} = [];
+    $self->{clientflags} = "";
+    $self->{sessionfile} = undef;
+    $self->{clientpid} = 0;
+    $is_tls13 = 0;
+    $ciphersuite = undef;
+
+    TLSProxy::Message->clear();
+    TLSProxy::Record->clear();
+}
+
+sub clear
+{
+    my $self = shift;
+
+    $self->clearClient;
+    $self->{ciphers} = "AES128-SHA";
+    $self->{ciphersuitess} = "TLS_AES_128_GCM_SHA256";
+    $self->{serverflags} = "";
+    $self->{serverconnects} = 1;
+    $self->{serverpid} = 0;
+    $self->{reneg} = 0;
+}
+
+sub restart
+{
+    my $self = shift;
+
+    $self->clear;
+    $self->start;
+}
+
+sub clientrestart
+{
+    my $self = shift;
+
+    $self->clear;
+    $self->clientstart;
+}
+
+sub connect_to_server
+{
+    my $self = shift;
+    my $servaddr = $self->{server_addr};
+
+    $servaddr =~ s/[\[\]]//g; # Remove [ and ]
+
+    my $sock = $IP_factory->(PeerAddr => $servaddr,
+                             PeerPort => $self->{server_port},
+                             Proto => 'tcp');
+    if (!defined($sock)) {
+        my $err = $!;
+        kill(3, $self->{real_serverpid});
+        die "unable to connect: $err\n";
+    }
+
+    $self->{server_sock} = $sock;
+}
+
+sub start
+{
+    my ($self) = shift;
+    my $pid;
+
+    if ($self->{proxy_sock} == 0) {
+        return 0;
+    }
+
+    my $execcmd = $self->execute
+        ." s_server -max_protocol TLSv1.3 -no_comp -rev -engine ossltest"
+        #In TLSv1.3 we issue two session tickets. The default session id
+        #callback gets confused because the ossltest engine causes the same
+        #session id to be created twice due to the changed random number
+        #generation. Using "-ext_cache" replaces the default callback with a
+        #different one that doesn't get confused.
+        ." -ext_cache"
+        ." -accept $self->{server_addr}:0"
+        ." -cert ".$self->cert." -cert2 ".$self->cert
+        ." -naccept ".$self->serverconnects;
+    if ($self->ciphers ne "") {
+        $execcmd .= " -cipher ".$self->ciphers;
+    }
+    if ($self->ciphersuitess ne "") {
+        $execcmd .= " -ciphersuites ".$self->ciphersuitess;
+    }
+    if ($self->serverflags ne "") {
+        $execcmd .= " ".$self->serverflags;
+    }
+    if ($self->debug) {
+        print STDERR "Server command: $execcmd\n";
+    }
+
+    open(my $savedin, "<&STDIN");
+
+    # Temporarily replace STDIN so that sink process can inherit it...
+    $pid = open(STDIN, "$execcmd 2>&1 |") or die "Failed to $execcmd: $!\n";
+    $self->{real_serverpid} = $pid;
+
+    # Process the output from s_server until we find the ACCEPT line, which
+    # tells us what the accepting address and port are.
+    while (<>) {
+        print;
+        s/\R$//;                # Better chomp
+        next unless (/^ACCEPT\s.*:(\d+)$/);
+        $self->{server_port} = $1;
+        last;
+    }
+
+    if ($self->{server_port} == 0) {
+        # This actually means that s_server exited, because otherwise
+        # we would still searching for ACCEPT...
+        waitpid($pid, 0);
+        die "no ACCEPT detected in '$execcmd' output: $?\n";
+    }
+
+    # Just make sure everything else is simply printed [as separate lines].
+    # The sub process simply inherits our STD* and will keep consuming
+    # server's output and printing it as long as there is anything there,
+    # out of our way.
+    my $error;
+    $pid = undef;
+    if (eval { require Win32::Process; 1; }) {
+        if (Win32::Process::Create(my $h, $^X, "perl -ne print", 0, 0, ".")) {
+            $pid = $h->GetProcessID();
+            $self->{proc_handle} = $h;  # hold handle till next round [or exit]
+        } else {
+            $error = Win32::FormatMessage(Win32::GetLastError());
+        }
+    } else {
+        if (defined($pid = fork)) {
+            $pid or exec("$^X -ne print") or exit($!);
+        } else {
+            $error = $!;
+        }
+    }
+
+    # Change back to original stdin
+    open(STDIN, "<&", $savedin);
+    close($savedin);
+
+    if (!defined($pid)) {
+        kill(3, $self->{real_serverpid});
+        die "Failed to capture s_server's output: $error\n";
+    }
+
+    $self->{serverpid} = $pid;
+
+    print STDERR "Server responds on ",
+                 "$self->{server_addr}:$self->{server_port}\n";
+
+    # Connect right away...
+    $self->connect_to_server();
+
+    return $self->clientstart;
+}
+
+sub clientstart
+{
+    my ($self) = shift;
+
+    if ($self->execute) {
+        my $pid;
+        my $execcmd = $self->execute
+             ." s_client -max_protocol TLSv1.3 -engine ossltest"
+             ." -connect $self->{proxy_addr}:$self->{proxy_port}";
+        if ($self->cipherc ne "") {
+            $execcmd .= " -cipher ".$self->cipherc;
+        }
+        if ($self->ciphersuitesc ne "") {
+            $execcmd .= " -ciphersuites ".$self->ciphersuitesc;
+        }
+        if ($self->clientflags ne "") {
+            $execcmd .= " ".$self->clientflags;
+        }
+        if ($self->clientflags !~ m/-(no)?servername/) {
+            $execcmd .= " -servername localhost";
+        }
+        if (defined $self->sessionfile) {
+            $execcmd .= " -ign_eof";
+        }
+        if ($self->debug) {
+            print STDERR "Client command: $execcmd\n";
+        }
+
+        open(my $savedout, ">&STDOUT");
+        # If we open pipe with new descriptor, attempt to close it,
+        # explicitly or implicitly, would incur waitpid and effectively
+        # dead-lock...
+        if (!($pid = open(STDOUT, "| $execcmd"))) {
+            my $err = $!;
+            kill(3, $self->{real_serverpid});
+            die "Failed to $execcmd: $err\n";
+        }
+        $self->{clientpid} = $pid;
+
+        # queue [magic] input
+        print $self->reneg ? "R" : "test";
+
+        # this closes client's stdin without waiting for its pid
+        open(STDOUT, ">&", $savedout);
+        close($savedout);
+    }
+
+    # Wait for incoming connection from client
+    my $fdset = IO::Select->new($self->{proxy_sock});
+    if (!$fdset->can_read(60)) {
+        kill(3, $self->{real_serverpid});
+        die "s_client didn't try to connect\n";
+    }
+
+    my $client_sock;
+    if(!($client_sock = $self->{proxy_sock}->accept())) {
+        warn "Failed accepting incoming connection: $!\n";
+        return 0;
+    }
+
+    print "Connection opened\n";
+
+    my $server_sock = $self->{server_sock};
+    my $indata;
+
+    #Wait for either the server socket or the client socket to become readable
+    $fdset = IO::Select->new($server_sock, $client_sock);
+    my @ready;
+    my $ctr = 0;
+    local $SIG{PIPE} = "IGNORE";
+    $self->{saw_session_ticket} = undef;
+    while($fdset->count && $ctr < 10) {
+        if (defined($self->{sessionfile})) {
+            # s_client got -ign_eof and won't be exiting voluntarily, so we
+            # look for data *and* session ticket...
+            last if TLSProxy::Message->success()
+                    && $self->{saw_session_ticket};
+        }
+        if (!(@ready = $fdset->can_read(1))) {
+            $ctr++;
+            next;
+        }
+        foreach my $hand (@ready) {
+            if ($hand == $server_sock) {
+                if ($server_sock->sysread($indata, 16384)) {
+                    if ($indata = $self->process_packet(1, $indata)) {
+                        $client_sock->syswrite($indata) or goto END;
+                    }
+                    $ctr = 0;
+                } else {
+                    $fdset->remove($server_sock);
+                    $client_sock->shutdown(SHUT_WR);
+                }
+            } elsif ($hand == $client_sock) {
+                if ($client_sock->sysread($indata, 16384)) {
+                    if ($indata = $self->process_packet(0, $indata)) {
+                        $server_sock->syswrite($indata) or goto END;
+                    }
+                    $ctr = 0;
+                } else {
+                    $fdset->remove($client_sock);
+                    $server_sock->shutdown(SHUT_WR);
+                }
+            } else {
+                kill(3, $self->{real_serverpid});
+                die "Unexpected handle";
+            }
+        }
+    }
+
+    if ($ctr >= 10) {
+        kill(3, $self->{real_serverpid});
+        die "No progress made";
+    }
+
+    END:
+    print "Connection closed\n";
+    if($server_sock) {
+        $server_sock->close();
+        $self->{server_sock} = undef;
+    }
+    if($client_sock) {
+        #Closing this also kills the child process
+        $client_sock->close();
+    }
+
+    my $pid;
+    if (--$self->{serverconnects} == 0) {
+        $pid = $self->{serverpid};
+        print "Waiting for 'perl -ne print' process to close: $pid...\n";
+        $pid = waitpid($pid, 0);
+        if ($pid > 0) {
+            die "exit code $? from 'perl -ne print' process\n" if $? != 0;
+        } elsif ($pid == 0) {
+            kill(3, $self->{real_serverpid});
+            die "lost control over $self->{serverpid}?";
+        }
+        $pid = $self->{real_serverpid};
+        print "Waiting for s_server process to close: $pid...\n";
+        # it's done already, just collect the exit code [and reap]...
+        waitpid($pid, 0);
+        die "exit code $? from s_server process\n" if $? != 0;
+    } else {
+        # It's a bit counter-intuitive spot to make next connection to
+        # the s_server. Rationale is that established connection works
+        # as synchronization point, in sense that this way we know that
+        # s_server is actually done with current session...
+        $self->connect_to_server();
+    }
+    $pid = $self->{clientpid};
+    print "Waiting for s_client process to close: $pid...\n";
+    waitpid($pid, 0);
+
+    return 1;
+}
+
+sub process_packet
+{
+    my ($self, $server, $packet) = @_;
+    my $len_real;
+    my $decrypt_len;
+    my $data;
+    my $recnum;
+
+    if ($server) {
+        print "Received server packet\n";
+    } else {
+        print "Received client packet\n";
+    }
+
+    if ($self->{direction} != $server) {
+        $self->{flight} = $self->{flight} + 1;
+        $self->{direction} = $server;
+    }
+
+    print "Packet length = ".length($packet)."\n";
+    print "Processing flight ".$self->flight."\n";
+
+    #Return contains the list of record found in the packet followed by the
+    #list of messages in those records and any partial message
+    my @ret = TLSProxy::Record->get_records($server, $self->flight,
+                                            $self->{partial}[$server].$packet);
+    $self->{partial}[$server] = $ret[2];
+    push @{$self->{record_list}}, @{$ret[0]};
+    push @{$self->{message_list}}, @{$ret[1]};
+
+    print "\n";
+
+    if (scalar(@{$ret[0]}) == 0 or length($ret[2]) != 0) {
+        return "";
+    }
+
+    #Finished parsing. Call user provided filter here
+    if (defined $self->filter) {
+        $self->filter->($self);
+    }
+
+    #Take a note on NewSessionTicket
+    foreach my $message (reverse @{$self->{message_list}}) {
+        if ($message->{mt} == TLSProxy::Message::MT_NEW_SESSION_TICKET) {
+            $self->{saw_session_ticket} = 1;
+            last;
+        }
+    }
+
+    #Reconstruct the packet
+    $packet = "";
+    foreach my $record (@{$self->record_list}) {
+        $packet .= $record->reconstruct_record($server);
+    }
+
+    print "Forwarded packet length = ".length($packet)."\n\n";
+
+    return $packet;
+}
+
+#Read accessors
+sub execute
+{
+    my $self = shift;
+    return $self->{execute};
+}
+sub cert
+{
+    my $self = shift;
+    return $self->{cert};
+}
+sub debug
+{
+    my $self = shift;
+    return $self->{debug};
+}
+sub flight
+{
+    my $self = shift;
+    return $self->{flight};
+}
+sub record_list
+{
+    my $self = shift;
+    return $self->{record_list};
+}
+sub success
+{
+    my $self = shift;
+    return $self->{success};
+}
+sub end
+{
+    my $self = shift;
+    return $self->{end};
+}
+sub supports_IPv6
+{
+    my $self = shift;
+    return $have_IPv6;
+}
+sub proxy_addr
+{
+    my $self = shift;
+    return $self->{proxy_addr};
+}
+sub proxy_port
+{
+    my $self = shift;
+    return $self->{proxy_port};
+}
+sub server_addr
+{
+    my $self = shift;
+    return $self->{server_addr};
+}
+sub server_port
+{
+    my $self = shift;
+    return $self->{server_port};
+}
+sub serverpid
+{
+    my $self = shift;
+    return $self->{serverpid};
+}
+sub clientpid
+{
+    my $self = shift;
+    return $self->{clientpid};
+}
+
+#Read/write accessors
+sub filter
+{
+    my $self = shift;
+    if (@_) {
+        $self->{filter} = shift;
+    }
+    return $self->{filter};
+}
+sub cipherc
+{
+    my $self = shift;
+    if (@_) {
+        $self->{cipherc} = shift;
+    }
+    return $self->{cipherc};
+}
+sub ciphersuitesc
+{
+    my $self = shift;
+    if (@_) {
+        $self->{ciphersuitesc} = shift;
+    }
+    return $self->{ciphersuitesc};
+}
+sub ciphers
+{
+    my $self = shift;
+    if (@_) {
+        $self->{ciphers} = shift;
+    }
+    return $self->{ciphers};
+}
+sub ciphersuitess
+{
+    my $self = shift;
+    if (@_) {
+        $self->{ciphersuitess} = shift;
+    }
+    return $self->{ciphersuitess};
+}
+sub serverflags
+{
+    my $self = shift;
+    if (@_) {
+        $self->{serverflags} = shift;
+    }
+    return $self->{serverflags};
+}
+sub clientflags
+{
+    my $self = shift;
+    if (@_) {
+        $self->{clientflags} = shift;
+    }
+    return $self->{clientflags};
+}
+sub serverconnects
+{
+    my $self = shift;
+    if (@_) {
+        $self->{serverconnects} = shift;
+    }
+    return $self->{serverconnects};
+}
+# This is a bit ugly because the caller is responsible for keeping the records
+# in sync with the updated message list; simply updating the message list isn't
+# sufficient to get the proxy to forward the new message.
+# But it does the trick for the one test (test_sslsessiontick) that needs it.
+sub message_list
+{
+    my $self = shift;
+    if (@_) {
+        $self->{message_list} = shift;
+    }
+    return $self->{message_list};
+}
+
+sub fill_known_data
+{
+    my $length = shift;
+    my $ret = "";
+    for (my $i = 0; $i < $length; $i++) {
+        $ret .= chr($i);
+    }
+    return $ret;
+}
+
+sub is_tls13
+{
+    my $class = shift;
+    if (@_) {
+        $is_tls13 = shift;
+    }
+    return $is_tls13;
+}
+
+sub reneg
+{
+    my $self = shift;
+    if (@_) {
+        $self->{reneg} = shift;
+    }
+    return $self->{reneg};
+}
+
+#Setting a sessionfile means that the client will not close until the given
+#file exists. This is useful in TLSv1.3 where otherwise s_client will close
+#immediately at the end of the handshake, but before the session has been
+#received from the server. A side effect of this is that s_client never sends
+#a close_notify, so instead we consider success to be when it sends application
+#data over the connection.
+sub sessionfile
+{
+    my $self = shift;
+    if (@_) {
+        $self->{sessionfile} = shift;
+        TLSProxy::Message->successondata(1);
+    }
+    return $self->{sessionfile};
+}
+
+sub ciphersuite
+{
+    my $class = shift;
+    if (@_) {
+        $ciphersuite = shift;
+    }
+    return $ciphersuite;
+}
+
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Record.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Record.pm
new file mode 100644
index 0000000..841467b
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/Record.pm
@@ -0,0 +1,401 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+use TLSProxy::Proxy;
+
+package TLSProxy::Record;
+
+my $server_encrypting = 0;
+my $client_encrypting = 0;
+my $etm = 0;
+
+use constant TLS_RECORD_HEADER_LENGTH => 5;
+
+#Record types
+use constant {
+    RT_APPLICATION_DATA => 23,
+    RT_HANDSHAKE => 22,
+    RT_ALERT => 21,
+    RT_CCS => 20,
+    RT_UNKNOWN => 100
+};
+
+my %record_type = (
+    RT_APPLICATION_DATA, "APPLICATION DATA",
+    RT_HANDSHAKE, "HANDSHAKE",
+    RT_ALERT, "ALERT",
+    RT_CCS, "CCS",
+    RT_UNKNOWN, "UNKNOWN"
+);
+
+use constant {
+    VERS_TLS_1_4 => 0x0305,
+    VERS_TLS_1_3 => 0x0304,
+    VERS_TLS_1_2 => 0x0303,
+    VERS_TLS_1_1 => 0x0302,
+    VERS_TLS_1_0 => 0x0301,
+    VERS_SSL_3_0 => 0x0300,
+    VERS_SSL_LT_3_0 => 0x02ff
+};
+
+my %tls_version = (
+    VERS_TLS_1_3, "TLS1.3",
+    VERS_TLS_1_2, "TLS1.2",
+    VERS_TLS_1_1, "TLS1.1",
+    VERS_TLS_1_0, "TLS1.0",
+    VERS_SSL_3_0, "SSL3",
+    VERS_SSL_LT_3_0, "SSL<3"
+);
+
+#Class method to extract records from a packet of data
+sub get_records
+{
+    my $class = shift;
+    my $server = shift;
+    my $flight = shift;
+    my $packet = shift;
+    my $partial = "";
+    my @record_list = ();
+    my @message_list = ();
+
+    my $recnum = 1;
+    while (length ($packet) > 0) {
+        print " Record $recnum ", $server ? "(server -> client)\n"
+                                          : "(client -> server)\n";
+
+        #Get the record header (unpack can't fail if $packet is too short)
+        my ($content_type, $version, $len) = unpack('Cnn', $packet);
+
+        if (length($packet) < TLS_RECORD_HEADER_LENGTH + ($len // 0)) {
+            print "Partial data : ".length($packet)." bytes\n";
+            $partial = $packet;
+            last;
+        }
+
+        my $data = substr($packet, TLS_RECORD_HEADER_LENGTH, $len);
+
+        print "  Content type: ".$record_type{$content_type}."\n";
+        print "  Version: $tls_version{$version}\n";
+        print "  Length: $len\n";
+
+        my $record = TLSProxy::Record->new(
+            $flight,
+            $content_type,
+            $version,
+            $len,
+            0,
+            $len,       # len_real
+            $len,       # decrypt_len
+            $data,      # data
+            $data       # decrypt_data
+        );
+
+        if ($content_type != RT_CCS
+                && (!TLSProxy::Proxy->is_tls13()
+                    || $content_type != RT_ALERT)) {
+            if (($server && $server_encrypting)
+                     || (!$server && $client_encrypting)) {
+                if (!TLSProxy::Proxy->is_tls13() && $etm) {
+                    $record->decryptETM();
+                } else {
+                    $record->decrypt();
+                }
+                $record->encrypted(1);
+
+                if (TLSProxy::Proxy->is_tls13()) {
+                    print "  Inner content type: "
+                          .$record_type{$record->content_type()}."\n";
+                }
+            }
+        }
+
+        push @record_list, $record;
+
+        #Now figure out what messages are contained within this record
+        my @messages = TLSProxy::Message->get_messages($server, $record);
+        push @message_list, @messages;
+
+        $packet = substr($packet, TLS_RECORD_HEADER_LENGTH + $len);
+        $recnum++;
+    }
+
+    return (\@record_list, \@message_list, $partial);
+}
+
+sub clear
+{
+    $server_encrypting = 0;
+    $client_encrypting = 0;
+}
+
+#Class level accessors
+sub server_encrypting
+{
+    my $class = shift;
+    if (@_) {
+      $server_encrypting = shift;
+    }
+    return $server_encrypting;
+}
+sub client_encrypting
+{
+    my $class = shift;
+    if (@_) {
+      $client_encrypting= shift;
+    }
+    return $client_encrypting;
+}
+#Enable/Disable Encrypt-then-MAC
+sub etm
+{
+    my $class = shift;
+    if (@_) {
+      $etm = shift;
+    }
+    return $etm;
+}
+
+sub new
+{
+    my $class = shift;
+    my ($flight,
+        $content_type,
+        $version,
+        $len,
+        $sslv2,
+        $len_real,
+        $decrypt_len,
+        $data,
+        $decrypt_data) = @_;
+
+    my $self = {
+        flight => $flight,
+        content_type => $content_type,
+        version => $version,
+        len => $len,
+        sslv2 => $sslv2,
+        len_real => $len_real,
+        decrypt_len => $decrypt_len,
+        data => $data,
+        decrypt_data => $decrypt_data,
+        orig_decrypt_data => $decrypt_data,
+        sent => 0,
+        encrypted => 0,
+        outer_content_type => RT_APPLICATION_DATA
+    };
+
+    return bless $self, $class;
+}
+
+#Decrypt using encrypt-then-MAC
+sub decryptETM
+{
+    my ($self) = shift;
+
+    my $data = $self->data;
+
+    if($self->version >= VERS_TLS_1_1()) {
+        #TLS1.1+ has an explicit IV. Throw it away
+        $data = substr($data, 16);
+    }
+
+    #Throw away the MAC (assumes MAC is 20 bytes for now. FIXME)
+    $data = substr($data, 0, length($data) - 20);
+
+    #Find out what the padding byte is
+    my $padval = unpack("C", substr($data, length($data) - 1));
+
+    #Throw away the padding
+    $data = substr($data, 0, length($data) - ($padval + 1));
+
+    $self->decrypt_data($data);
+    $self->decrypt_len(length($data));
+
+    return $data;
+}
+
+#Standard decrypt
+sub decrypt()
+{
+    my ($self) = shift;
+    my $mactaglen = 20;
+    my $data = $self->data;
+
+    #Throw away any IVs
+    if (TLSProxy::Proxy->is_tls13()) {
+        #A TLS1.3 client, when processing the server's initial flight, could
+        #respond with either an encrypted or an unencrypted alert.
+        if ($self->content_type() == RT_ALERT) {
+            #TODO(TLS1.3): Eventually it is sufficient just to check the record
+            #content type. If an alert is encrypted it will have a record
+            #content type of application data. However we haven't done the
+            #record layer changes yet, so it's a bit more complicated. For now
+            #we will additionally check if the data length is 2 (1 byte for
+            #alert level, 1 byte for alert description). If it is, then this is
+            #an unencrypted alert, so don't try to decrypt
+            return $data if (length($data) == 2);
+        }
+        $mactaglen = 16;
+    } elsif ($self->version >= VERS_TLS_1_1()) {
+        #16 bytes for a standard IV
+        $data = substr($data, 16);
+
+        #Find out what the padding byte is
+        my $padval = unpack("C", substr($data, length($data) - 1));
+
+        #Throw away the padding
+        $data = substr($data, 0, length($data) - ($padval + 1));
+    }
+
+    #Throw away the MAC or TAG
+    $data = substr($data, 0, length($data) - $mactaglen);
+
+    if (TLSProxy::Proxy->is_tls13()) {
+        #Get the content type
+        my $content_type = unpack("C", substr($data, length($data) - 1));
+        $self->content_type($content_type);
+        $data = substr($data, 0, length($data) - 1);
+    }
+
+    $self->decrypt_data($data);
+    $self->decrypt_len(length($data));
+
+    return $data;
+}
+
+#Reconstruct the on-the-wire record representation
+sub reconstruct_record
+{
+    my $self = shift;
+    my $server = shift;
+    my $data;
+
+    #We only replay the records in the same direction
+    if ($self->{sent} || ($self->flight & 1) != $server) {
+        return "";
+    }
+    $self->{sent} = 1;
+
+    if ($self->sslv2) {
+        $data = pack('n', $self->len | 0x8000);
+    } else {
+        if (TLSProxy::Proxy->is_tls13() && $self->encrypted) {
+            $data = pack('Cnn', $self->outer_content_type, $self->version,
+                         $self->len);
+        } else {
+            $data = pack('Cnn', $self->content_type, $self->version,
+                         $self->len);
+        }
+
+    }
+    $data .= $self->data;
+
+    return $data;
+}
+
+#Read only accessors
+sub flight
+{
+    my $self = shift;
+    return $self->{flight};
+}
+sub sslv2
+{
+    my $self = shift;
+    return $self->{sslv2};
+}
+sub len_real
+{
+    my $self = shift;
+    return $self->{len_real};
+}
+sub orig_decrypt_data
+{
+    my $self = shift;
+    return $self->{orig_decrypt_data};
+}
+
+#Read/write accessors
+sub decrypt_len
+{
+    my $self = shift;
+    if (@_) {
+      $self->{decrypt_len} = shift;
+    }
+    return $self->{decrypt_len};
+}
+sub data
+{
+    my $self = shift;
+    if (@_) {
+      $self->{data} = shift;
+    }
+    return $self->{data};
+}
+sub decrypt_data
+{
+    my $self = shift;
+    if (@_) {
+      $self->{decrypt_data} = shift;
+    }
+    return $self->{decrypt_data};
+}
+sub len
+{
+    my $self = shift;
+    if (@_) {
+      $self->{len} = shift;
+    }
+    return $self->{len};
+}
+sub version
+{
+    my $self = shift;
+    if (@_) {
+      $self->{version} = shift;
+    }
+    return $self->{version};
+}
+sub content_type
+{
+    my $self = shift;
+    if (@_) {
+      $self->{content_type} = shift;
+    }
+    return $self->{content_type};
+}
+sub encrypted
+{
+    my $self = shift;
+    if (@_) {
+      $self->{encrypted} = shift;
+    }
+    return $self->{encrypted};
+}
+sub outer_content_type
+{
+    my $self = shift;
+    if (@_) {
+      $self->{outer_content_type} = shift;
+    }
+    return $self->{outer_content_type};
+}
+sub is_fatal_alert
+{
+    my $self = shift;
+    my $server = shift;
+
+    if (($self->{flight} & 1) == $server
+        && $self->{content_type} == TLSProxy::Record::RT_ALERT) {
+        my ($level, $alert) = unpack('CC', $self->decrypt_data);
+        return $alert if ($level == 2);
+    }
+    return 0;
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ServerHello.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ServerHello.pm
new file mode 100644
index 0000000..e9f1eca
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ServerHello.pm
@@ -0,0 +1,236 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::ServerHello;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+my $hrrrandom = pack("C*", 0xCF, 0x21, 0xAD, 0x74, 0xE5, 0x9A, 0x61, 0x11, 0xBE,
+                           0x1D, 0x8C, 0x02, 0x1E, 0x65, 0xB8, 0x91, 0xC2, 0xA2,
+                           0x11, 0x16, 0x7A, 0xBB, 0x8C, 0x5E, 0x07, 0x9E, 0x09,
+                           0xE2, 0xC8, 0xA8, 0x33, 0x9C);
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        TLSProxy::Message::MT_SERVER_HELLO,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    $self->{server_version} = 0;
+    $self->{random} = [];
+    $self->{session_id_len} = 0;
+    $self->{session} = "";
+    $self->{ciphersuite} = 0;
+    $self->{comp_meth} = 0;
+    $self->{extension_data} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+    my $ptr = 2;
+    my ($server_version) = unpack('n', $self->data);
+    my $neg_version = $server_version;
+
+    my $random = substr($self->data, $ptr, 32);
+    $ptr += 32;
+    my $session_id_len = 0;
+    my $session = "";
+    $session_id_len = unpack('C', substr($self->data, $ptr));
+    $ptr++;
+    $session = substr($self->data, $ptr, $session_id_len);
+    $ptr += $session_id_len;
+
+    my $ciphersuite = unpack('n', substr($self->data, $ptr));
+    $ptr += 2;
+    my $comp_meth = 0;
+    $comp_meth = unpack('C', substr($self->data, $ptr));
+    $ptr++;
+
+    my $extensions_len = unpack('n', substr($self->data, $ptr));
+    if (!defined $extensions_len) {
+        $extensions_len = 0;
+    } else {
+        $ptr += 2;
+    }
+    #For now we just deal with this as a block of data. In the future we will
+    #want to parse this
+    my $extension_data;
+    if ($extensions_len != 0) {
+        $extension_data = substr($self->data, $ptr);
+
+        if (length($extension_data) != $extensions_len) {
+            die "Invalid extension length\n";
+        }
+    } else {
+        if (length($self->data) != $ptr) {
+            die "Invalid extension length\n";
+        }
+        $extension_data = "";
+    }
+    my %extensions = ();
+    while (length($extension_data) >= 4) {
+        my ($type, $size) = unpack("nn", $extension_data);
+        my $extdata = substr($extension_data, 4, $size);
+        $extension_data = substr($extension_data, 4 + $size);
+        $extensions{$type} = $extdata;
+        if ($type == TLSProxy::Message::EXT_SUPPORTED_VERSIONS) {
+            $neg_version = unpack('n', $extdata);
+        }
+    }
+
+    if ($random eq $hrrrandom) {
+        TLSProxy::Proxy->is_tls13(1);
+    } elsif ($neg_version == TLSProxy::Record::VERS_TLS_1_3) {
+        TLSProxy::Proxy->is_tls13(1);
+
+        TLSProxy::Record->server_encrypting(1);
+        TLSProxy::Record->client_encrypting(1);
+    }
+
+    $self->server_version($server_version);
+    $self->random($random);
+    $self->session_id_len($session_id_len);
+    $self->session($session);
+    $self->ciphersuite($ciphersuite);
+    TLSProxy::Proxy->ciphersuite($ciphersuite);
+    $self->comp_meth($comp_meth);
+    $self->extension_data(\%extensions);
+
+    $self->process_data();
+
+
+    print "    Server Version:".$server_version."\n";
+    print "    Session ID Len:".$session_id_len."\n";
+    print "    Ciphersuite:".$ciphersuite."\n";
+    print "    Compression Method:".$comp_meth."\n";
+    print "    Extensions Len:".$extensions_len."\n";
+}
+
+#Perform any actions necessary based on the data we've seen
+sub process_data
+{
+    my $self = shift;
+
+    TLSProxy::Message->ciphersuite($self->ciphersuite);
+}
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data;
+    my $extensions = "";
+
+    $data = pack('n', $self->server_version);
+    $data .= $self->random;
+    $data .= pack('C', $self->session_id_len);
+    $data .= $self->session;
+    $data .= pack('n', $self->ciphersuite);
+    $data .= pack('C', $self->comp_meth);
+
+    foreach my $key (keys %{$self->extension_data}) {
+        my $extdata = ${$self->extension_data}{$key};
+        $extensions .= pack("n", $key);
+        $extensions .= pack("n", length($extdata));
+        $extensions .= $extdata;
+        if ($key == $self->dupext) {
+          $extensions .= pack("n", $key);
+          $extensions .= pack("n", length($extdata));
+          $extensions .= $extdata;
+        }
+    }
+
+    $data .= pack('n', length($extensions));
+    $data .= $extensions;
+    $self->data($data);
+}
+
+#Read/write accessors
+sub server_version
+{
+    my $self = shift;
+    if (@_) {
+      $self->{server_version} = shift;
+    }
+    return $self->{server_version};
+}
+sub random
+{
+    my $self = shift;
+    if (@_) {
+      $self->{random} = shift;
+    }
+    return $self->{random};
+}
+sub session_id_len
+{
+    my $self = shift;
+    if (@_) {
+      $self->{session_id_len} = shift;
+    }
+    return $self->{session_id_len};
+}
+sub session
+{
+    my $self = shift;
+    if (@_) {
+      $self->{session} = shift;
+    }
+    return $self->{session};
+}
+sub ciphersuite
+{
+    my $self = shift;
+    if (@_) {
+      $self->{ciphersuite} = shift;
+    }
+    return $self->{ciphersuite};
+}
+sub comp_meth
+{
+    my $self = shift;
+    if (@_) {
+      $self->{comp_meth} = shift;
+    }
+    return $self->{comp_meth};
+}
+sub extension_data
+{
+    my $self = shift;
+    if (@_) {
+      $self->{extension_data} = shift;
+    }
+    return $self->{extension_data};
+}
+sub set_extension
+{
+    my ($self, $ext_type, $ext_data) = @_;
+    $self->{extension_data}{$ext_type} = $ext_data;
+}
+sub delete_extension
+{
+    my ($self, $ext_type) = @_;
+    delete $self->{extension_data}{$ext_type};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ServerKeyExchange.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ServerKeyExchange.pm
new file mode 100644
index 0000000..e0086e2
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/TLSProxy/ServerKeyExchange.pm
@@ -0,0 +1,157 @@
+# Copyright 2016-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::ServerKeyExchange;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+    my $class = shift;
+    my ($server,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens) = @_;
+
+    my $self = $class->SUPER::new(
+        $server,
+        TLSProxy::Message::MT_SERVER_KEY_EXCHANGE,
+        $data,
+        $records,
+        $startoffset,
+        $message_frag_lens);
+
+    #DHE
+    $self->{p} = "";
+    $self->{g} = "";
+    $self->{pub_key} = "";
+    $self->{sigalg} = -1;
+    $self->{sig} = "";
+
+    return $self;
+}
+
+sub parse
+{
+    my $self = shift;
+    my $sigalg = -1;
+
+    #Minimal SKE parsing. Only supports one known DHE ciphersuite at the moment
+    return if TLSProxy::Proxy->ciphersuite()
+                 != TLSProxy::Message::CIPHER_ADH_AES_128_SHA
+              && TLSProxy::Proxy->ciphersuite()
+                 != TLSProxy::Message::CIPHER_DHE_RSA_AES_128_SHA;
+
+    my $p_len = unpack('n', $self->data);
+    my $ptr = 2;
+    my $p = substr($self->data, $ptr, $p_len);
+    $ptr += $p_len;
+
+    my $g_len = unpack('n', substr($self->data, $ptr));
+    $ptr += 2;
+    my $g = substr($self->data, $ptr, $g_len);
+    $ptr += $g_len;
+
+    my $pub_key_len = unpack('n', substr($self->data, $ptr));
+    $ptr += 2;
+    my $pub_key = substr($self->data, $ptr, $pub_key_len);
+    $ptr += $pub_key_len;
+
+    #We assume its signed
+    my $record = ${$self->records}[0];
+
+    if (TLSProxy::Proxy->is_tls13()
+            || $record->version() == TLSProxy::Record::VERS_TLS_1_2) {
+        $sigalg = unpack('n', substr($self->data, $ptr));
+        $ptr += 2;
+    }
+    my $sig = "";
+    if (defined $sigalg) {
+        my $sig_len = unpack('n', substr($self->data, $ptr));
+        if (defined $sig_len) {
+            $ptr += 2;
+            $sig = substr($self->data, $ptr, $sig_len);
+            $ptr += $sig_len;
+        }
+    }
+
+    $self->p($p);
+    $self->g($g);
+    $self->pub_key($pub_key);
+    $self->sigalg($sigalg) if defined $sigalg;
+    $self->signature($sig);
+}
+
+
+#Reconstruct the on-the-wire message data following changes
+sub set_message_contents
+{
+    my $self = shift;
+    my $data;
+
+    $data = pack('n', length($self->p));
+    $data .= $self->p;
+    $data .= pack('n', length($self->g));
+    $data .= $self->g;
+    $data .= pack('n', length($self->pub_key));
+    $data .= $self->pub_key;
+    $data .= pack('n', $self->sigalg) if ($self->sigalg != -1);
+    if (length($self->signature) > 0) {
+        $data .= pack('n', length($self->signature));
+        $data .= $self->signature;
+    }
+
+    $self->data($data);
+}
+
+#Read/write accessors
+#DHE
+sub p
+{
+    my $self = shift;
+    if (@_) {
+      $self->{p} = shift;
+    }
+    return $self->{p};
+}
+sub g
+{
+    my $self = shift;
+    if (@_) {
+      $self->{g} = shift;
+    }
+    return $self->{g};
+}
+sub pub_key
+{
+    my $self = shift;
+    if (@_) {
+      $self->{pub_key} = shift;
+    }
+    return $self->{pub_key};
+}
+sub sigalg
+{
+    my $self = shift;
+    if (@_) {
+      $self->{sigalg} = shift;
+    }
+    return $self->{sigalg};
+}
+sub signature
+{
+    my $self = shift;
+    if (@_) {
+      $self->{sig} = shift;
+    }
+    return $self->{sig};
+}
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/checkhandshake.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/checkhandshake.pm
new file mode 100644
index 0000000..04441b5
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/checkhandshake.pm
@@ -0,0 +1,232 @@
+#! /usr/bin/env perl
+# Copyright 2015-2019 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+package checkhandshake;
+
+use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file srctop_dir bldtop_dir/;
+use OpenSSL::Test::Utils;
+use TLSProxy::Proxy;
+
+use Exporter;
+our @ISA = 'Exporter';
+our @EXPORT = qw(@handmessages @extensions checkhandshake);
+
+use constant {
+    DEFAULT_HANDSHAKE => 1,
+    OCSP_HANDSHAKE => 2,
+    RESUME_HANDSHAKE => 4,
+    CLIENT_AUTH_HANDSHAKE => 8,
+    RENEG_HANDSHAKE => 16,
+    NPN_HANDSHAKE => 32,
+    EC_HANDSHAKE => 64,
+    HRR_HANDSHAKE => 128,
+    HRR_RESUME_HANDSHAKE => 256,
+
+    ALL_HANDSHAKES => 511
+};
+
+use constant {
+    #DEFAULT also includes SESSION_TICKET_SRV_EXTENSION and SERVER_NAME_CLI
+    DEFAULT_EXTENSIONS => 0x00000007,
+    SESSION_TICKET_SRV_EXTENSION => 0x00000002,
+    SERVER_NAME_CLI_EXTENSION => 0x00000004,
+    SERVER_NAME_SRV_EXTENSION => 0x00000008,
+    STATUS_REQUEST_CLI_EXTENSION => 0x00000010,
+    STATUS_REQUEST_SRV_EXTENSION => 0x00000020,
+    ALPN_CLI_EXTENSION => 0x00000040,
+    ALPN_SRV_EXTENSION => 0x00000080,
+    SCT_CLI_EXTENSION => 0x00000100,
+    SCT_SRV_EXTENSION => 0x00000200,
+    RENEGOTIATE_CLI_EXTENSION => 0x00000400,
+    NPN_CLI_EXTENSION => 0x00000800,
+    NPN_SRV_EXTENSION => 0x00001000,
+    SRP_CLI_EXTENSION => 0x00002000,
+    #Client side for ec point formats is a default extension
+    EC_POINT_FORMAT_SRV_EXTENSION => 0x00004000,
+    PSK_CLI_EXTENSION => 0x00008000,
+    PSK_SRV_EXTENSION => 0x00010000,
+    KEY_SHARE_SRV_EXTENSION => 0x00020000,
+    PSK_KEX_MODES_EXTENSION => 0x00040000,
+    KEY_SHARE_HRR_EXTENSION => 0x00080000,
+    SUPPORTED_GROUPS_SRV_EXTENSION => 0x00100000,
+    POST_HANDSHAKE_AUTH_CLI_EXTENSION => 0x00200000
+};
+
+our @handmessages = ();
+our @extensions = ();
+
+sub checkhandshake($$$$)
+{
+    my ($proxy, $handtype, $exttype, $testname) = @_;
+
+    subtest $testname => sub {
+        my $loop = 0;
+        my $numtests;
+        my $extcount;
+        my $clienthelloseen = 0;
+
+        my $lastmt = 0;
+        my $numsh = 0;
+        if (TLSProxy::Proxy::is_tls13()) {
+            #How many ServerHellos are we expecting?
+            for ($numtests = 0; $handmessages[$loop][1] != 0; $loop++) {
+                next if (($handmessages[$loop][1] & $handtype) == 0);
+                $numsh++ if ($lastmt != TLSProxy::Message::MT_SERVER_HELLO
+                             && $handmessages[$loop][0] == TLSProxy::Message::MT_SERVER_HELLO);
+                $lastmt = $handmessages[$loop][0];
+            }
+        }
+
+        #First count the number of tests
+        my $nextmess = 0;
+        my $message = undef;
+        my $chnum = 0;
+        my $shnum = 0;
+        if (!TLSProxy::Proxy::is_tls13()) {
+            # In non-TLSv1.3 we always treat reneg CH and SH like the first CH
+            # and SH
+            $chnum = 1;
+            $shnum = 1;
+        }
+        #If we're only expecting one ServerHello out of two then we skip the
+        #first ServerHello in the list completely
+        $shnum++ if ($numsh == 1 && TLSProxy::Proxy::is_tls13());
+        $loop = 0;
+        for ($numtests = 0; $handmessages[$loop][1] != 0; $loop++) {
+            next if (($handmessages[$loop][1] & $handtype) == 0);
+            if (scalar @{$proxy->message_list} > $nextmess) {
+                $message = ${$proxy->message_list}[$nextmess];
+                $nextmess++;
+            } else {
+                $message = undef;
+            }
+            $numtests++;
+
+            next if (!defined $message);
+            if (TLSProxy::Proxy::is_tls13()) {
+                $chnum++ if $message->mt() == TLSProxy::Message::MT_CLIENT_HELLO;
+                $shnum++ if $message->mt() == TLSProxy::Message::MT_SERVER_HELLO;
+            }
+            next if ($message->mt() != TLSProxy::Message::MT_CLIENT_HELLO
+                    && $message->mt() != TLSProxy::Message::MT_SERVER_HELLO
+                    && $message->mt() !=
+                       TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS
+                    && $message->mt() != TLSProxy::Message::MT_CERTIFICATE
+                    && $message->mt() != TLSProxy::Message::MT_CERTIFICATE_REQUEST);
+
+            next if $message->mt() == TLSProxy::Message::MT_CERTIFICATE
+                    && !TLSProxy::Proxy::is_tls13();
+
+            my $extchnum = 1;
+            my $extshnum = 1;
+            for (my $extloop = 0;
+                    $extensions[$extloop][3] != 0;
+                    $extloop++) {
+                $extchnum = 2 if $extensions[$extloop][0] != TLSProxy::Message::MT_CLIENT_HELLO
+                                 && TLSProxy::Proxy::is_tls13();
+                $extshnum = 2 if $extensions[$extloop][0] != TLSProxy::Message::MT_SERVER_HELLO
+                                 && $extchnum == 2;
+                next if $extensions[$extloop][0] == TLSProxy::Message::MT_CLIENT_HELLO
+                                 && $extchnum != $chnum;
+                next if $extensions[$extloop][0] == TLSProxy::Message::MT_SERVER_HELLO
+                                 && $extshnum != $shnum;
+                next if ($message->mt() != $extensions[$extloop][0]);
+                next if ($message->server() != $extensions[$extloop][2]);
+                $numtests++;
+            }
+            $numtests++;
+        }
+
+        plan tests => $numtests;
+
+        $nextmess = 0;
+        $message = undef;
+        if (TLSProxy::Proxy::is_tls13()) {
+            $chnum = 0;
+            $shnum = 0;
+        } else {
+            # In non-TLSv1.3 we always treat reneg CH and SH like the first CH
+            # and SH
+            $chnum = 1;
+            $shnum = 1;
+        }
+        #If we're only expecting one ServerHello out of two then we skip the
+        #first ServerHello in the list completely
+        $shnum++ if ($numsh == 1 && TLSProxy::Proxy::is_tls13());
+        for ($loop = 0; $handmessages[$loop][1] != 0; $loop++) {
+            next if (($handmessages[$loop][1] & $handtype) == 0);
+            if (scalar @{$proxy->message_list} > $nextmess) {
+                $message = ${$proxy->message_list}[$nextmess];
+                $nextmess++;
+            } else {
+                $message = undef;
+            }
+            if (!defined $message) {
+                fail("Message type check. Got nothing, expected "
+                     .$handmessages[$loop][0]);
+                next;
+            } else {
+                ok($message->mt == $handmessages[$loop][0],
+                   "Message type check. Got ".$message->mt
+                   .", expected ".$handmessages[$loop][0]);
+            }
+            if (TLSProxy::Proxy::is_tls13()) {
+                $chnum++ if $message->mt() == TLSProxy::Message::MT_CLIENT_HELLO;
+                $shnum++ if $message->mt() == TLSProxy::Message::MT_SERVER_HELLO;
+            }
+
+            next if ($message->mt() != TLSProxy::Message::MT_CLIENT_HELLO
+                    && $message->mt() != TLSProxy::Message::MT_SERVER_HELLO
+                    && $message->mt() !=
+                       TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS
+                    && $message->mt() != TLSProxy::Message::MT_CERTIFICATE
+                    && $message->mt() != TLSProxy::Message::MT_CERTIFICATE_REQUEST);
+
+            next if $message->mt() == TLSProxy::Message::MT_CERTIFICATE
+                    && !TLSProxy::Proxy::is_tls13();
+
+            if ($message->mt() == TLSProxy::Message::MT_CLIENT_HELLO) {
+                #Add renegotiate extension we will expect if renegotiating
+                $exttype |= RENEGOTIATE_CLI_EXTENSION
+                    if ($clienthelloseen && !TLSProxy::Proxy::is_tls13());
+                $clienthelloseen = 1;
+            }
+            #Now check that we saw the extensions we expected
+            my $msgexts = $message->extension_data();
+            my $extchnum = 1;
+            my $extshnum = 1;
+            for (my $extloop = 0, $extcount = 0; $extensions[$extloop][3] != 0;
+                                $extloop++) {
+                #In TLSv1.3 we can have two ClientHellos if there has been a
+                #HelloRetryRequest, and they may have different extensions. Skip
+                #if these are extensions for a different ClientHello
+                $extchnum = 2 if $extensions[$extloop][0] != TLSProxy::Message::MT_CLIENT_HELLO
+                                 && TLSProxy::Proxy::is_tls13();
+                $extshnum = 2 if $extensions[$extloop][0] != TLSProxy::Message::MT_SERVER_HELLO
+                                 && $extchnum == 2;
+                next if $extensions[$extloop][0] == TLSProxy::Message::MT_CLIENT_HELLO
+                                 && $extchnum != $chnum;
+                next if $extensions[$extloop][0] == TLSProxy::Message::MT_SERVER_HELLO
+                                 && $extshnum != $shnum;
+                next if ($message->mt() != $extensions[$extloop][0]);
+                next if ($message->server() != $extensions[$extloop][2]);
+                ok (($extensions[$extloop][3] & $exttype) == 0
+                      || defined ($msgexts->{$extensions[$extloop][1]}),
+                    "Extension presence check (Message: ".$message->mt()
+                    ." Extension: ".($extensions[$extloop][3] & $exttype).", "
+                    .$extloop.")");
+                $extcount++ if (($extensions[$extloop][3] & $exttype) != 0);
+            }
+            ok($extcount == keys %$msgexts, "Extensions count mismatch ("
+                                            .$extcount.", ".(keys %$msgexts)
+                                            .")");
+        }
+    }
+}
+
+1;
diff --git a/ap/lib/libssl/openssl-1.1.1o/util/perl/with_fallback.pm b/ap/lib/libssl/openssl-1.1.1o/util/perl/with_fallback.pm
new file mode 100644
index 0000000..2423650
--- /dev/null
+++ b/ap/lib/libssl/openssl-1.1.1o/util/perl/with_fallback.pm
@@ -0,0 +1,27 @@
+# Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+package with_fallback;
+
+sub import {
+    shift;
+
+    use File::Basename;
+    use File::Spec::Functions;
+    foreach (@_) {
+	eval "use $_";
+	if ($@) {
+	    unshift @INC, catdir(dirname(__FILE__),
+                                 "..", "..", "external", "perl");
+	    my $transfer = "transfer::$_";
+	    eval "use $transfer";
+	    shift @INC;
+	    warn $@ if $@;
+	}
+    }
+}
+1;