zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/kernel/entry-header.S b/ap/os/linux/linux-3.4.x/arch/arm/kernel/entry-header.S
new file mode 100644
index 0000000..a8dd573
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/kernel/entry-header.S
@@ -0,0 +1,194 @@
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+
+@ Bad Abort numbers
+@ -----------------
+@
+#define BAD_PREFETCH 0
+#define BAD_DATA 1
+#define BAD_ADDREXCPTN 2
+#define BAD_IRQ 3
+#define BAD_UNDEFINSTR 4
+
+@
+@ Most of the stack format comes from struct pt_regs, but with
+@ the addition of 8 bytes for storing syscall args 5 and 6.
+@ This _must_ remain a multiple of 8 for EABI.
+@
+#define S_OFF 8
+
+/*
+ * The SWI code relies on the fact that R0 is at the bottom of the stack
+ * (due to slow/fast restore user regs).
+ */
+#if S_R0 != 0
+#error "Please fix"
+#endif
+
+ .macro zero_fp
+#ifdef CONFIG_FRAME_POINTER
+ mov fp, #0
+#endif
+ .endm
+
+ .macro alignment_trap, rtemp
+#ifdef CONFIG_ALIGNMENT_TRAP
+ ldr \rtemp, .LCcralign
+ ldr \rtemp, [\rtemp]
+ mcr p15, 0, \rtemp, c1, c0
+#endif
+ .endm
+
+ @
+ @ Store/load the USER SP and LR registers by switching to the SYS
+ @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+ @ available. Should only be called from SVC mode
+ @
+ .macro store_user_sp_lr, rd, rtemp, offset = 0
+ mrs \rtemp, cpsr
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch to the SYS mode
+
+ str sp, [\rd, #\offset] @ save sp_usr
+ str lr, [\rd, #\offset + 4] @ save lr_usr
+
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch back to the SVC mode
+ .endm
+
+ .macro load_user_sp_lr, rd, rtemp, offset = 0
+ mrs \rtemp, cpsr
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch to the SYS mode
+
+ ldr sp, [\rd, #\offset] @ load sp_usr
+ ldr lr, [\rd, #\offset + 4] @ load lr_usr
+
+ eor \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+ msr cpsr_c, \rtemp @ switch back to the SVC mode
+ .endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+ .macro svc_exit, rpsr
+ msr spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ sub r0, sp, #4 @ uninhabited address
+ strex r1, r2, [r0] @ clear the exclusive monitor
+#endif
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ .endm
+
+ .macro restore_user_regs, fast = 0, offset = 0
+ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
+ ldr lr, [sp, #\offset + S_PC]! @ get pc
+ msr spsr_cxsf, r1 @ save in spsr_svc
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ strex r1, r2, [sp] @ clear the exclusive monitor
+#endif
+ .if \fast
+ ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
+ .else
+ ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
+ .endif
+ mov r0, r0 @ ARMv5T and earlier require a nop
+ @ after ldm {}^
+ add sp, sp, #S_FRAME_SIZE - S_PC
+ movs pc, lr @ return & move spsr_svc into cpsr
+ .endm
+#ifndef CONFIG_STACK_SIZE
+ .macro get_thread_info, rd
+ mov \rd, sp, lsr #13
+ mov \rd, \rd, lsl #13
+ .endm
+#else
+ .extern current_kernel_thread
+ .macro get_thread_info, rd
+ ldr \rd, =current_kernel_thread
+ ldr \rd,[\rd]
+ .endm
+#endif
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ .endm
+#else /* CONFIG_THUMB2_KERNEL */
+ .macro svc_exit, rpsr
+ ldr lr, [sp, #S_SP] @ top of the stack
+ ldrd r0, r1, [sp, #S_LR] @ calling lr and pc
+
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ strex r2, r1, [sp, #S_LR] @ clear the exclusive monitor
+
+ stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context
+ ldmia sp, {r0 - r12}
+ mov sp, lr
+ ldr lr, [sp], #4
+ rfeia sp!
+ .endm
+
+ .macro restore_user_regs, fast = 0, offset = 0
+ mov r2, sp
+ load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
+ ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
+ ldr lr, [sp, #\offset + S_PC] @ get pc
+ add sp, sp, #\offset + S_SP
+ msr spsr_cxsf, r1 @ save in spsr_svc
+
+ @ We must avoid clrex due to Cortex-A15 erratum #830321
+ strex r1, r2, [sp] @ clear the exclusive monitor
+
+ .if \fast
+ ldmdb sp, {r1 - r12} @ get calling r1 - r12
+ .else
+ ldmdb sp, {r0 - r12} @ get calling r0 - r12
+ .endif
+ add sp, sp, #S_FRAME_SIZE - S_SP
+ movs pc, lr @ return & move spsr_svc into cpsr
+ .endm
+
+#ifndef CONFIG_STACK_SIZE
+ .macro get_thread_info, rd
+ mov \rd, sp
+ lsr \rd, \rd, #13
+ mov \rd, \rd, lsl #13
+ .endm
+#else
+ .extern current_kernel_thread
+ .macro get_thread_info, rd
+ ldr \rd, =current_kernel_thread
+ ldr \rd,[\rd]
+ .endm
+#endif
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ nop
+ .endm
+#endif /* !CONFIG_THUMB2_KERNEL */
+
+/*
+ * These are the registers used in the syscall handler, and allow us to
+ * have in theory up to 7 arguments to a function - r0 to r6.
+ *
+ * r7 is reserved for the system call number for thumb mode.
+ *
+ * Note that tbl == why is intentional.
+ *
+ * We must set at least "tsk" and "why" when calling ret_with_reschedule.
+ */
+scno .req r7 @ syscall number
+tbl .req r8 @ syscall table pointer
+why .req r8 @ Linux syscall (!= 0)
+tsk .req r9 @ current thread_info