zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-carmeva.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-carmeva.c
new file mode 100644
index 0000000..59d9cf9
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-carmeva.c
@@ -0,0 +1,168 @@
+/*
+ * linux/arch/arm/mach-at91/board-carmeva.c
+ *
+ * Copyright (c) 2005 Peer Georgi
+ * Conitec Datasystems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include "generic.h"
+
+
+static void __init carmeva_init_early(void)
+{
+ /* Initialize processor: 20.000 MHz crystal */
+ at91_initialize(20000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static struct macb_platform_data __initdata carmeva_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata carmeva_usbh_data = {
+ .ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
+};
+
+static struct at91_udc_data __initdata carmeva_udc_data = {
+ .vbus_pin = AT91_PIN_PD12,
+ .pullup_pin = AT91_PIN_PD9,
+};
+
+/* FIXME: user dependent */
+// static struct at91_cf_data __initdata carmeva_cf_data = {
+// .det_pin = AT91_PIN_PB0,
+// .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = -EINVAL,
+ // .vcc_pin = -EINVAL,
+// };
+
+static struct at91_mmc_data __initdata carmeva_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PB10,
+ .wp_pin = AT91_PIN_PC14,
+ .vcc_pin = -EINVAL,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 10 * 1000 * 1000,
+ },
+ { /* User accessible spi - cs1 (250KHz) */
+ .modalias = "spi-cs1",
+ .chip_select = 1,
+ .max_speed_hz = 250 * 1000,
+ },
+ { /* User accessible spi - cs2 (1MHz) */
+ .modalias = "spi-cs2",
+ .chip_select = 2,
+ .max_speed_hz = 1 * 1000 * 1000,
+ },
+ { /* User accessible spi - cs3 (10MHz) */
+ .modalias = "spi-cs3",
+ .chip_select = 3,
+ .max_speed_hz = 10 * 1000 * 1000,
+ },
+};
+
+static struct gpio_led carmeva_leds[] = {
+ { /* "user led 1", LED9 */
+ .name = "led9",
+ .gpio = AT91_PIN_PA21,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 2", LED10 */
+ .name = "led10",
+ .gpio = AT91_PIN_PA25,
+ .active_low = 1,
+ },
+ { /* "user led 3", LED11 */
+ .name = "led11",
+ .gpio = AT91_PIN_PA26,
+ .active_low = 1,
+ },
+ { /* "user led 4", LED12 */
+ .name = "led12",
+ .gpio = AT91_PIN_PA18,
+ .active_low = 1,
+ }
+};
+
+static void __init carmeva_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&carmeva_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&carmeva_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&carmeva_udc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* SPI */
+ at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
+ /* Compact Flash */
+// at91_add_device_cf(&carmeva_cf_data);
+ /* MMC */
+ at91_add_device_mmc(0, &carmeva_mmc_data);
+ /* LEDs */
+ at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
+}
+
+MACHINE_START(CARMEVA, "Carmeva")
+ /* Maintainer: Conitec Datasystems */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = carmeva_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = carmeva_board_init,
+MACHINE_END