zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-csb637.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-csb637.c
new file mode 100644
index 0000000..f650bf3
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-csb637.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-at91/board-csb637.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include "generic.h"
+
+
+static void __init csb637_init_early(void)
+{
+ /* Initialize processor: 3.6864 MHz crystal */
+ at91_initialize(3686400);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* make console=ttyS0 (ie, DBGU) the default */
+ at91_set_serial_console(0);
+}
+
+static struct macb_platform_data __initdata csb637_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC0,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata csb637_usbh_data = {
+ .ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
+};
+
+static struct at91_udc_data __initdata csb637_udc_data = {
+ .vbus_pin = AT91_PIN_PB28,
+ .pullup_pin = AT91_PIN_PB1,
+};
+
+#define CSB_FLASH_BASE AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE SZ_16M
+
+static struct mtd_partition csb_flash_partitions[] = {
+ {
+ .name = "uMON flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE, /* read only */
+ }
+};
+
+static struct physmap_flash_data csb_flash_data = {
+ .width = 2,
+ .parts = csb_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+ {
+ .start = CSB_FLASH_BASE,
+ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &csb_flash_data,
+ },
+ .resource = csb_flash_resources,
+ .num_resources = ARRAY_SIZE(csb_flash_resources),
+};
+
+static struct gpio_led csb_leds[] = {
+ { /* "d1", red */
+ .name = "d1",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+};
+
+static void __init csb637_board_init(void)
+{
+ /* LED(s) */
+ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&csb637_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&csb637_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&csb637_udc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
+ /* NOR flash */
+ platform_device_register(&csb_flash);
+}
+
+MACHINE_START(CSB637, "Cogent CSB637")
+ /* Maintainer: Bill Gatliff */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = csb637_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = csb637_board_init,
+MACHINE_END