zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-kb9202.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-kb9202.c
new file mode 100644
index 0000000..59b92aa
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-kb9202.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-at91/board-kb9202.c
+ *
+ * Copyright (c) 2005 kb_admin
+ * KwikByte, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/cpu.h>
+#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
+
+#include "generic.h"
+
+
+static void __init kb9202_init_early(void)
+{
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
+ /* Initialize processor: 10 MHz crystal */
+ at91_initialize(10000000);
+
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+ /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static struct macb_platform_data __initdata kb9202_eth_data = {
+ .phy_irq_pin = AT91_PIN_PB29,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata kb9202_usbh_data = {
+ .ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
+};
+
+static struct at91_udc_data __initdata kb9202_udc_data = {
+ .vbus_pin = AT91_PIN_PB24,
+ .pullup_pin = AT91_PIN_PB22,
+};
+
+static struct at91_mmc_data __initdata kb9202_mmc_data = {
+ .det_pin = AT91_PIN_PB2,
+ .slot_b = 0,
+ .wire4 = 1,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
+};
+
+static struct mtd_partition __initdata kb9202_nand_partition[] = {
+ {
+ .name = "nand_fs",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct atmel_nand_data __initdata kb9202_nand_data = {
+ .ale = 22,
+ .cle = 21,
+ .det_pin = -EINVAL,
+ .rdy_pin = AT91_PIN_PC29,
+ .enable_pin = AT91_PIN_PC28,
+ .ecc_mode = NAND_ECC_SOFT,
+ .parts = kb9202_nand_partition,
+ .num_parts = ARRAY_SIZE(kb9202_nand_partition),
+};
+
+static void __init kb9202_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&kb9202_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&kb9202_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&kb9202_udc_data);
+ /* MMC */
+ at91_add_device_mmc(0, &kb9202_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
+ /* NAND */
+ at91_add_device_nand(&kb9202_nand_data);
+}
+
+MACHINE_START(KB9200, "KB920x")
+ /* Maintainer: KwikByte, Inc. */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = kb9202_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = kb9202_board_init,
+MACHINE_END