zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-picotux200.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-picotux200.c
new file mode 100644
index 0000000..59e35dd
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-at91/board-picotux200.c
@@ -0,0 +1,130 @@
+/*
+ * linux/arch/arm/mach-at91/board-picotux200.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Kleinhenz Elektronik GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
+
+#include "generic.h"
+
+
+static void __init picotux200_init_early(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91_initialize(18432000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static struct macb_platform_data __initdata picotux200_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata picotux200_usbh_data = {
+ .ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
+};
+
+static struct at91_mmc_data __initdata picotux200_mmc_data = {
+ .det_pin = AT91_PIN_PB27,
+ .slot_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PA17,
+ .vcc_pin = -EINVAL,
+};
+
+#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
+#define PICOTUX200_FLASH_SIZE SZ_4M
+
+static struct physmap_flash_data picotux200_flash_data = {
+ .width = 2,
+};
+
+static struct resource picotux200_flash_resource = {
+ .start = PICOTUX200_FLASH_BASE,
+ .end = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device picotux200_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &picotux200_flash_data,
+ },
+ .resource = &picotux200_flash_resource,
+ .num_resources = 1,
+};
+
+static void __init picotux200_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&picotux200_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&picotux200_usbh_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(0, &picotux200_mmc_data);
+ /* NOR Flash */
+ platform_device_register(&picotux200_flash);
+}
+
+MACHINE_START(PICOTUX2XX, "picotux 200")
+ /* Maintainer: Kleinhenz Elektronik GmbH */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = picotux200_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = picotux200_board_init,
+MACHINE_END