zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-msm/board-msm7x30.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-msm/board-msm7x30.c
new file mode 100644
index 0000000..db81ed5
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-msm/board-msm7x30.c
@@ -0,0 +1,151 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/usb/msm_hsusb.h>
+#include <linux/clkdev.h>
+#include <linux/memblock.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/memory.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+
+#include <mach/vreg.h>
+#include "devices.h"
+#include "gpiomux.h"
+#include "proc_comm.h"
+
+extern struct sys_timer msm_timer;
+
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+ struct meminfo *mi)
+{
+ for (; tag->hdr.size; tag = tag_next(tag))
+ if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
+ tag->u.mem.start = 0;
+ tag->u.mem.size += SZ_2M;
+ }
+}
+
+static void __init msm7x30_reserve(void)
+{
+ memblock_remove(0x0, SZ_2M);
+}
+
+static int hsusb_phy_init_seq[] = {
+ 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
+ 0x02, 0x36, /* Disable CDR Auto Reset feature */
+ -1
+};
+
+static struct msm_otg_platform_data msm_otg_pdata = {
+ .phy_init_seq = hsusb_phy_init_seq,
+ .mode = USB_PERIPHERAL,
+ .otg_control = OTG_PHY_CONTROL,
+};
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+ [49] = { /* UART2 RFR */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+ [50] = { /* UART2 CTS */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+ [51] = { /* UART2 RX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+ [52] = { /* UART2 TX */
+ .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+ GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+ },
+#endif
+};
+
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
+ &msm_device_uart2,
+#endif
+ &msm_device_smd,
+ &msm_device_otg,
+ &msm_device_hsusb,
+ &msm_device_hsusb_host,
+};
+
+static void __init msm7x30_init_irq(void)
+{
+ msm_init_irq();
+}
+
+static void __init msm7x30_init(void)
+{
+ msm_device_otg.dev.platform_data = &msm_otg_pdata;
+ msm_device_hsusb.dev.parent = &msm_device_otg.dev;
+ msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init msm7x30_map_io(void)
+{
+ msm_map_msm7x30_io();
+ msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
+}
+
+MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
+ .map_io = msm7x30_map_io,
+ .init_irq = msm7x30_init_irq,
+ .init_machine = msm7x30_init,
+ .timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
+ .map_io = msm7x30_map_io,
+ .init_irq = msm7x30_init_irq,
+ .init_machine = msm7x30_init,
+ .timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
+ .map_io = msm7x30_map_io,
+ .init_irq = msm7x30_init_irq,
+ .init_machine = msm7x30_init,
+ .timer = &msm_timer,
+MACHINE_END