zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-omap1/irq.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-omap1/irq.c
new file mode 100644
index 0000000..4448114
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-omap1/irq.c
@@ -0,0 +1,248 @@
+/*
+ * linux/arch/arm/mach-omap1/irq.c
+ *
+ * Interrupt handler for all OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Completely re-written to support various OMAP chips with bank specific
+ * interrupt handlers.
+ *
+ * Some snippets of the code taken from the older OMAP interrupt handler
+ * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * GPIO interrupt handler moved to gpio.c by Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <plat/cpu.h>
+
+#include <mach/hardware.h>
+
+#define IRQ_BANK(irq) ((irq) >> 5)
+#define IRQ_BIT(irq) ((irq) & 0x1f)
+
+struct omap_irq_bank {
+ unsigned long base_reg;
+ unsigned long trigger_map;
+ unsigned long wake_enable;
+};
+
+u32 omap_irq_flags;
+static unsigned int irq_bank_count;
+static struct omap_irq_bank *irq_banks;
+
+static inline unsigned int irq_bank_readl(int bank, int offset)
+{
+ return omap_readl(irq_banks[bank].base_reg + offset);
+}
+
+static inline void irq_bank_writel(unsigned long value, int bank, int offset)
+{
+ omap_writel(value, irq_banks[bank].base_reg + offset);
+}
+
+static void omap_ack_irq(struct irq_data *d)
+{
+ if (d->irq > 31)
+ omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
+
+ omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
+}
+
+static void omap_mask_irq(struct irq_data *d)
+{
+ int bank = IRQ_BANK(d->irq);
+ u32 l;
+
+ l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+ l |= 1 << IRQ_BIT(d->irq);
+ omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+}
+
+static void omap_unmask_irq(struct irq_data *d)
+{
+ int bank = IRQ_BANK(d->irq);
+ u32 l;
+
+ l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+ l &= ~(1 << IRQ_BIT(d->irq));
+ omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+}
+
+static void omap_mask_ack_irq(struct irq_data *d)
+{
+ omap_mask_irq(d);
+ omap_ack_irq(d);
+}
+
+static int omap_wake_irq(struct irq_data *d, unsigned int enable)
+{
+ int bank = IRQ_BANK(d->irq);
+
+ if (enable)
+ irq_banks[bank].wake_enable |= IRQ_BIT(d->irq);
+ else
+ irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq);
+
+ return 0;
+}
+
+
+/*
+ * Allows tuning the IRQ type and priority
+ *
+ * NOTE: There is currently no OMAP fiq handler for Linux. Read the
+ * mailing list threads on FIQ handlers if you are planning to
+ * add a FIQ handler for OMAP.
+ */
+static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
+{
+ signed int bank;
+ unsigned long val, offset;
+
+ bank = IRQ_BANK(irq);
+ /* FIQ is only available on bank 0 interrupts */
+ fiq = bank ? 0 : (fiq & 0x1);
+ val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1);
+ offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4;
+ irq_bank_writel(val, bank, offset);
+}
+
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct omap_irq_bank omap7xx_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
+ { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_irq_bank omap1510_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed },
+};
+static struct omap_irq_bank omap310_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 },
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+
+static struct omap_irq_bank omap1610_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd },
+ { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff },
+ { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff },
+};
+#endif
+
+static struct irq_chip omap_irq_chip = {
+ .name = "MPU",
+ .irq_ack = omap_mask_ack_irq,
+ .irq_mask = omap_mask_irq,
+ .irq_unmask = omap_unmask_irq,
+ .irq_set_wake = omap_wake_irq,
+};
+
+void __init omap1_init_irq(void)
+{
+ int i, j;
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ if (cpu_is_omap7xx()) {
+ omap_irq_flags = INT_7XX_IH2_IRQ;
+ irq_banks = omap7xx_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+ if (cpu_is_omap1510()) {
+ omap_irq_flags = INT_1510_IH2_IRQ;
+ irq_banks = omap1510_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
+ }
+ if (cpu_is_omap310()) {
+ omap_irq_flags = INT_1510_IH2_IRQ;
+ irq_banks = omap310_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
+ }
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+ if (cpu_is_omap16xx()) {
+ omap_irq_flags = INT_1510_IH2_IRQ;
+ irq_banks = omap1610_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
+ }
+#endif
+ printk("Total of %i interrupts in %i interrupt banks\n",
+ irq_bank_count * 32, irq_bank_count);
+
+ /* Mask and clear all interrupts */
+ for (i = 0; i < irq_bank_count; i++) {
+ irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET);
+ irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET);
+ }
+
+ /* Clear any pending interrupts */
+ irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
+ irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
+
+ /* Enable interrupts in global mask */
+ if (cpu_is_omap7xx())
+ irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
+
+ /* Install the interrupt handlers for each bank */
+ for (i = 0; i < irq_bank_count; i++) {
+ for (j = i * 32; j < (i + 1) * 32; j++) {
+ int irq_trigger;
+
+ irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
+ omap_irq_set_cfg(j, 0, 0, irq_trigger);
+
+ irq_set_chip_and_handler(j, &omap_irq_chip,
+ handle_level_irq);
+ set_irq_flags(j, IRQF_VALID);
+ }
+ }
+
+ /* Unmask level 2 handler */
+
+ if (cpu_is_omap7xx())
+ omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ));
+ else if (cpu_is_omap15xx())
+ omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ));
+ else if (cpu_is_omap16xx())
+ omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ));
+}