zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-omap2/board-2430sdp.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-omap2/board-2430sdp.c
new file mode 100644
index 0000000..e658f83
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-omap2/board-2430sdp.c
@@ -0,0 +1,308 @@
+/*
+ * linux/arch/arm/mach-omap2/board-2430sdp.c
+ *
+ * Copyright (C) 2006 Texas Instruments
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * Initial Code : Based on a patch from Komal Shah and Richard Woodruff
+ * Updated the Code for 2430 SDP : Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
+#include <linux/delay.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include "common.h"
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc-smc91x.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "common-board-devices.h"
+
+#define SDP2430_CS0_BASE 0x04000000
+#define SECONDARY_LCD_GPIO 147
+
+static struct mtd_partition sdp2430_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data sdp2430_flash_data = {
+ .width = 2,
+ .parts = sdp2430_partitions,
+ .nr_parts = ARRAY_SIZE(sdp2430_partitions),
+};
+
+static struct resource sdp2430_flash_resource = {
+ .start = SDP2430_CS0_BASE,
+ .end = SDP2430_CS0_BASE + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sdp2430_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdp2430_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &sdp2430_flash_resource,
+};
+
+static struct platform_device *sdp2430_devices[] __initdata = {
+ &sdp2430_flash_device,
+};
+
+/* LCD */
+#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
+#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
+
+static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
+ gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
+
+ return 0;
+}
+
+static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
+ gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
+}
+
+static struct panel_generic_dpi_data sdp2430_panel_data = {
+ .name = "nec_nl2432dr22-11b",
+ .platform_enable = sdp2430_panel_enable_lcd,
+ .platform_disable = sdp2430_panel_disable_lcd,
+};
+
+static struct omap_dss_device sdp2430_lcd_device = {
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 16,
+ .data = &sdp2430_panel_data,
+};
+
+static struct omap_dss_device *sdp2430_dss_devices[] = {
+ &sdp2430_lcd_device,
+};
+
+static struct omap_dss_board_info sdp2430_dss_data = {
+ .num_devices = ARRAY_SIZE(sdp2430_dss_devices),
+ .devices = sdp2430_dss_devices,
+ .default_device = &sdp2430_lcd_device,
+};
+
+static void __init sdp2430_display_init(void)
+{
+ int r;
+
+ static struct gpio gpios[] __initdata = {
+ { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
+ "LCD reset" },
+ { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
+ "LCD Backlight" },
+ };
+
+ r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+ if (r) {
+ pr_err("Cannot request LCD GPIOs, error %d\n", r);
+ return;
+ }
+
+ omap_display_init(&sdp2430_dss_data);
+}
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 5,
+ .gpio_irq = 149,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
+
+};
+
+static void __init board_smc91x_init(void)
+{
+ omap_mux_init_gpio(149, OMAP_PIN_INPUT);
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
+static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp2430_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdp2430_vmmc1_supplies),
+ .consumer_supplies = &sdp2430_vmmc1_supplies[0],
+};
+
+static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data sdp2430_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &sdp2430_gpio_data,
+ .vmmc1 = &sdp2430_vmmc1,
+};
+
+static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("isp1301_omap", 0x2D),
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
+static int __init omap2430_i2c_init(void)
+{
+ sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
+ omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
+ ARRAY_SIZE(sdp2430_i2c1_boardinfo));
+ omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+ &sdp2430_twldata);
+ return 0;
+}
+
+static struct omap2_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .ext_clock = 1,
+ },
+ {} /* Terminator */
+};
+
+static struct omap_usb_config sdp2430_usb_config __initdata = {
+ .otg = 1,
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 0x0,
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ .hmc_mode = 0x1,
+#endif
+ .pins[0] = 3,
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static void __init omap_2430sdp_init(void)
+{
+ omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
+ omap2430_i2c_init();
+
+ platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
+ omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
+ omap_hsmmc_init(mmc);
+ omap2_usbfs_init(&sdp2430_usb_config);
+
+ omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+ usb_musb_init(NULL);
+
+ board_smc91x_init();
+
+ /* Turn off secondary LCD backlight */
+ gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
+ "Secondary LCD backlight");
+
+ sdp2430_display_init();
+}
+
+MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
+ /* Maintainer: Syed Khasim - Texas Instruments Inc */
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
+ .init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
+ .init_machine = omap_2430sdp_init,
+ .timer = &omap2_timer,
+ .restart = omap_prcm_restart,
+MACHINE_END