zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-omap2/dpll44xx.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-omap2/dpll44xx.c
new file mode 100644
index 0000000..9c6a296
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-omap2/dpll44xx.c
@@ -0,0 +1,153 @@
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock44xx.h"
+#include "cm-regbits-44xx.h"
+
+/* Supported only on OMAP4 */
+int omap4_dpllmx_gatectrl_read(struct clk *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ return -EINVAL;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = __raw_readl(clk->clksel_reg);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+void omap4_dpllmx_allow_gatectrl(struct clk *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = __raw_readl(clk->clksel_reg);
+ /* Clear the bit to allow gatectrl */
+ v &= ~mask;
+ __raw_writel(v, clk->clksel_reg);
+}
+
+void omap4_dpllmx_deny_gatectrl(struct clk *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = __raw_readl(clk->clksel_reg);
+ /* Set the bit to deny gatectrl */
+ v |= mask;
+ __raw_writel(v, clk->clksel_reg);
+}
+
+const struct clkops clkops_omap4_dpllmx_ops = {
+ .allow_idle = omap4_dpllmx_allow_gatectrl,
+ .deny_idle = omap4_dpllmx_deny_gatectrl,
+};
+
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
+{
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = __raw_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
+{
+ u32 v;
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
+
+ if (v)
+ target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
+
+ r = omap2_dpll_round_rate(clk, target_rate);
+ if (r == ~0)
+ return r;
+
+ if (v)
+ clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+
+ return clk->dpll_data->last_rounded_rate;
+}