zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Kconfig b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 0000000..75a26ea
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,80 @@
+# Copyright 2009 Samsung Electronics Co.
+# Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+if ARCH_S5PC100
+
+config CPU_S5PC100
+ bool
+ select S5P_EXT_INT
+ select SAMSUNG_DMADEV
+ help
+ Enable S5PC100 CPU support
+
+config S5PC100_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC100_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S5PC100_SETUP_IDE
+ bool
+ help
+ Common setup code for S5PC100 IDE GPIO configurations
+
+config S5PC100_SETUP_KEYPAD
+ bool
+ help
+ Common setup code for KEYPAD GPIO configurations.
+
+config S5PC100_SETUP_SDHCI
+ bool
+ select S5PC100_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S5PC100 based SDHCI systems
+
+config S5PC100_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
+config S5PC100_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations.
+
+config MACH_SMDKC100
+ bool "SMDKC100"
+ select CPU_S5PC100
+ select S3C_DEV_FB
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_IDE
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_TS
+ select S5PC100_SETUP_FB_24BPP
+ select S5PC100_SETUP_I2C1
+ select S5PC100_SETUP_IDE
+ select S5PC100_SETUP_KEYPAD
+ select S5PC100_SETUP_SDHCI
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
+ help
+ Machine support for the Samsung SMDKC100
+
+endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Makefile b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 0000000..118c711
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,32 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core
+
+obj-y += common.o clock.o
+
+obj-y += dma.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
+
+# device support
+
+obj-y += dev-audio.o
+
+obj-y += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Makefile.boot b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 0000000..79ece40
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y += 0x20008000
+params_phys-y := 0x20000100
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/clock.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/clock.c
new file mode 100644
index 0000000..16eca4e
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/clock.c
@@ -0,0 +1,1351 @@
+/* linux/arch/arm/mach-s5pc100/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PC100 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include "common.h"
+
+static struct clk s5p_clk_otgphy = {
+ .name = "otg_phy",
+};
+
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
+static struct clk *clk_src_mout_href_list[] = {
+ [0] = &s5p_clk_27m,
+ [1] = &clk_fin_hpll,
+};
+
+static struct clksrc_sources clk_src_mout_href = {
+ .sources = clk_src_mout_href_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_href_list),
+};
+
+static struct clksrc_clk clk_mout_href = {
+ .clk = {
+ .name = "mout_href",
+ },
+ .sources = &clk_src_mout_href,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+};
+
+static struct clk *clk_src_mout_48m_list[] = {
+ [0] = &clk_xusbxti,
+ [1] = &s5p_clk_otgphy,
+};
+
+static struct clksrc_sources clk_src_mout_48m = {
+ .sources = clk_src_mout_48m_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list),
+};
+
+static struct clksrc_clk clk_mout_48m = {
+ .clk = {
+ .name = "mout_48m",
+ },
+ .sources = &clk_src_mout_48m,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clk *clk_src_mout_hpll_list[] = {
+ [0] = &s5p_clk_27m,
+};
+
+static struct clksrc_sources clk_src_mout_hpll = {
+ .sources = clk_src_mout_hpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+ .clk = {
+ .name = "mout_hpll",
+ },
+ .sources = &clk_src_mout_hpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_apll = {
+ .clk = {
+ .name = "div_apll",
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_arm = {
+ .clk = {
+ .name = "div_arm",
+ .parent = &clk_div_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_d0_bus = {
+ .clk = {
+ .name = "div_d0_bus",
+ .parent = &clk_div_arm.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_pclkd0 = {
+ .clk = {
+ .name = "div_pclkd0",
+ .parent = &clk_div_d0_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_secss = {
+ .clk = {
+ .name = "div_secss",
+ .parent = &clk_div_d0_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_apll2 = {
+ .clk = {
+ .name = "div_apll2",
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
+};
+
+static struct clk *clk_src_mout_am_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_div_apll2.clk,
+};
+
+static struct clksrc_sources clk_src_mout_am = {
+ .sources = clk_src_mout_am_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+ .clk = {
+ .name = "mout_am",
+ },
+ .sources = &clk_src_mout_am,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_d1_bus = {
+ .clk = {
+ .name = "div_d1_bus",
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_mpll2 = {
+ .clk = {
+ .name = "div_mpll2",
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_mpll = {
+ .clk = {
+ .name = "div_mpll",
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
+};
+
+static struct clk *clk_src_mout_onenand_list[] = {
+ [0] = &clk_div_d0_bus.clk,
+ [1] = &clk_div_d1_bus.clk,
+};
+
+static struct clksrc_sources clk_src_mout_onenand = {
+ .sources = clk_src_mout_onenand_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+ .clk = {
+ .name = "mout_onenand",
+ },
+ .sources = &clk_src_mout_onenand,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_onenand = {
+ .clk = {
+ .name = "div_onenand",
+ .parent = &clk_mout_onenand.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
+};
+
+static struct clksrc_clk clk_div_pclkd1 = {
+ .clk = {
+ .name = "div_pclkd1",
+ .parent = &clk_div_d1_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_cam = {
+ .clk = {
+ .name = "div_cam",
+ .parent = &clk_div_mpll2.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
+};
+
+static struct clksrc_clk clk_div_hdmi = {
+ .clk = {
+ .name = "div_hdmi",
+ .parent = &clk_mout_hpll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
+};
+
+static u32 epll_div[][4] = {
+ { 32750000, 131, 3, 4 },
+ { 32768000, 131, 3, 4 },
+ { 36000000, 72, 3, 3 },
+ { 45000000, 90, 3, 3 },
+ { 45158000, 90, 3, 3 },
+ { 45158400, 90, 3, 3 },
+ { 48000000, 96, 3, 3 },
+ { 49125000, 131, 4, 3 },
+ { 49152000, 131, 4, 3 },
+ { 60000000, 120, 3, 3 },
+ { 67737600, 226, 5, 3 },
+ { 67738000, 226, 5, 3 },
+ { 73800000, 246, 5, 3 },
+ { 73728000, 246, 5, 3 },
+ { 72000000, 144, 3, 3 },
+ { 84000000, 168, 3, 3 },
+ { 96000000, 96, 3, 2 },
+ { 144000000, 144, 3, 2 },
+ { 192000000, 96, 3, 1 }
+};
+
+static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con;
+ unsigned int i;
+
+ if (clk->rate == rate) /* Return if nothing changed */
+ return 0;
+
+ epll_con = __raw_readl(S5P_EPLL_CON);
+
+ epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
+ (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
+ (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5pc100_epll_ops = {
+ .get_rate = s5p_epll_get_rate,
+ .set_rate = s5pc100_epll_set_rate,
+};
+
+static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
+}
+
+static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_off[] = {
+ {
+ .name = "cssys",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "secss",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "g2d",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "mdma",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "cfcon",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "nfcon",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "onenandc",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "sdm",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_2_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "seckey",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_2_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "modemif",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "otg",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "usbhost",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "lcd",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "rotator",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .devname = "s5p-fimc.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .devname = "s5p-fimc.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "fimc",
+ .devname = "s5p-fimc.2",
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "jpeg",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "mipi-dsim",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mipi-csis",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "g3d",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "tv",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "vp",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "mixer",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "hdmi",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "mfc",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "apc",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "iec",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "systimer",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "watchdog",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "rtc",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.2",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "irda",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "ccan",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "ccan",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "hsitx",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsirx",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "ac97",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.0",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.1",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "spdif",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "adc",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "keypad",
+ .parent = &clk_div_pclkd1.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "mmc_48m",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "mmc_48m",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "mmc_48m",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 17),
+ },
+};
+
+static struct clk clk_hsmmc2 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 7),
+};
+
+static struct clk clk_hsmmc1 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 6),
+};
+
+static struct clk clk_hsmmc0 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 5),
+};
+
+static struct clk clk_48m_spi0 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 7),
+};
+
+static struct clk clk_48m_spi1 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 8),
+};
+
+static struct clk clk_48m_spi2 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.2",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 9),
+};
+
+static struct clk clk_vclk54m = {
+ .name = "vclk_54m",
+ .rate = 54000000,
+};
+
+static struct clk clk_i2scdclk0 = {
+ .name = "i2s_cdclk0",
+};
+
+static struct clk clk_i2scdclk1 = {
+ .name = "i2s_cdclk1",
+};
+
+static struct clk clk_i2scdclk2 = {
+ .name = "i2s_cdclk2",
+};
+
+static struct clk clk_pcmcdclk0 = {
+ .name = "pcm_cdclk0",
+};
+
+static struct clk clk_pcmcdclk1 = {
+ .name = "pcm_cdclk1",
+};
+
+static struct clk *clk_src_group1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll2.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clk_src_group1 = {
+ .sources = clk_src_group1_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group1_list),
+};
+
+static struct clk *clk_src_group2_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_group2 = {
+ .sources = clk_src_group2_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group2_list),
+};
+
+static struct clk *clk_src_group3_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk0,
+ [4] = &clk_pcmcdclk0,
+ [5] = &clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clk_src_group3 = {
+ .sources = clk_src_group3_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group3_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+ .clk = {
+ .name = "sclk_audio",
+ .devname = "samsung-pcm.0",
+ .ctrlbit = (1 << 8),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group3,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+};
+
+static struct clk *clk_src_group4_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk1,
+ [4] = &clk_pcmcdclk1,
+ [5] = &clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clk_src_group4 = {
+ .sources = clk_src_group4_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group4_list),
+};
+
+static struct clksrc_clk clk_sclk_audio1 = {
+ .clk = {
+ .name = "sclk_audio",
+ .devname = "samsung-pcm.1",
+ .ctrlbit = (1 << 9),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group4,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
+static struct clk *clk_src_group5_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk2,
+ [4] = &clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clk_src_group5 = {
+ .sources = clk_src_group5_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group5_list),
+};
+
+static struct clksrc_clk clk_sclk_audio2 = {
+ .clk = {
+ .name = "sclk_audio",
+ .devname = "samsung-pcm.2",
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group5,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
+static struct clk *clk_src_group6_list[] = {
+ [0] = &s5p_clk_27m,
+ [1] = &clk_vclk54m,
+ [2] = &clk_div_hdmi.clk,
+};
+
+static struct clksrc_sources clk_src_group6 = {
+ .sources = clk_src_group6_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group6_list),
+};
+
+static struct clk *clk_src_group7_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_mout_hpll.clk,
+ [3] = &clk_vclk54m,
+};
+
+static struct clksrc_sources clk_src_group7 = {
+ .sources = clk_src_group7_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group7_list),
+};
+
+static struct clk *clk_src_mmc0_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+};
+
+static struct clksrc_sources clk_src_mmc0 = {
+ .sources = clk_src_mmc0_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
+};
+
+static struct clk *clk_src_mmc12_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clk_src_mmc12 = {
+ .sources = clk_src_mmc12_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
+};
+
+static struct clk *clk_src_irda_usb_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+static struct clksrc_sources clk_src_irda_usb = {
+ .sources = clk_src_irda_usb_list,
+ .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
+};
+
+static struct clk *clk_src_pwi_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_mout_epll.clk,
+ [2] = &clk_div_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_pwi = {
+ .sources = clk_src_pwi_list,
+ .nr_sources = ARRAY_SIZE(clk_src_pwi_list),
+};
+
+static struct clk *clk_sclk_spdif_list[] = {
+ [0] = &clk_sclk_audio0.clk,
+ [1] = &clk_sclk_audio1.clk,
+ [2] = &clk_sclk_audio2.clk,
+};
+
+static struct clksrc_sources clk_src_sclk_spdif = {
+ .sources = clk_sclk_spdif_list,
+ .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+ .clk = {
+ .name = "sclk_spdif",
+ .ctrlbit = (1 << 11),
+ .enable = s5pc100_sclk1_ctrl,
+ .ops = &s5p_sclk_spdif_ops,
+ },
+ .sources = &clk_src_sclk_spdif,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_mixer",
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group6,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
+ }, {
+ .clk = {
+ .name = "sclk_lcd",
+ .ctrlbit = (1 << 0),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "s5p-fimc.0",
+ .ctrlbit = (1 << 1),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "s5p-fimc.1",
+ .ctrlbit = (1 << 2),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "s5p-fimc.2",
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_irda",
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_irda_usb,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_irda",
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_pwi",
+ .ctrlbit = (1 << 1),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_pwi,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
+ }, {
+ .clk = {
+ .name = "sclk_uhost",
+ .ctrlbit = (1 << 11),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_irda_usb,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
+ },
+};
+
+static struct clksrc_clk clk_sclk_uart = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 12),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc0,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 13),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = (1 << 14),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 4),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 5),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_mout_hpll,
+ &clk_mout_href,
+ &clk_mout_48m,
+ &clk_div_apll,
+ &clk_div_arm,
+ &clk_div_d0_bus,
+ &clk_div_pclkd0,
+ &clk_div_secss,
+ &clk_div_apll2,
+ &clk_mout_am,
+ &clk_div_d1_bus,
+ &clk_div_mpll2,
+ &clk_div_mpll,
+ &clk_mout_onenand,
+ &clk_div_onenand,
+ &clk_div_pclkd1,
+ &clk_div_cam,
+ &clk_div_hdmi,
+ &clk_sclk_audio0,
+ &clk_sclk_audio1,
+ &clk_sclk_audio2,
+ &clk_sclk_spdif,
+};
+
+static struct clk *clk_cdev[] = {
+ &clk_hsmmc0,
+ &clk_hsmmc1,
+ &clk_hsmmc2,
+ &clk_48m_spi0,
+ &clk_48m_spi1,
+ &clk_48m_spi2,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uart,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_spi2,
+};
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+ unsigned long xtal;
+ unsigned long arm;
+ unsigned long hclkd0;
+ unsigned long hclkd1;
+ unsigned long pclkd0;
+ unsigned long pclkd1;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long hpll;
+ unsigned int ptr;
+
+ /* Set S5PC100 functions for clk_fout_epll */
+ clk_fout_epll.enable = s5p_epll_enable;
+ clk_fout_epll.ops = &s5pc100_epll_ops;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal = clk_get_rate(&clk_xtal);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
+ mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
+ epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
+ hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
+
+ printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
+ print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_mout_hpll.clk.rate = hpll;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+
+ arm = clk_get_rate(&clk_div_arm.clk);
+ hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
+ pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
+ hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
+ pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
+
+ printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
+ print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
+
+ clk_f.rate = arm;
+ clk_h.rate = hclkd1;
+ clk_p.rate = pclkd1;
+}
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+ {
+ .name = "tzic",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "intc",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "ebi",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "intmem",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "sromc",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "dmc",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "chipid",
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "gpio",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.2",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.3",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "timers",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 6),
+ },
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_i2scdclk0,
+ &clk_i2scdclk1,
+ &clk_i2scdclk2,
+ &clk_pcmcdclk0,
+ &clk_pcmcdclk1,
+};
+
+static struct clk_lookup s5pc100_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
+};
+
+void __init s5pc100_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
+
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+ s3c_disable_clocks(clk_cdev[ptr], 1);
+
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
+ s3c_pwmclk_init();
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/common.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/common.c
new file mode 100644
index 0000000..6219086
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/common.c
@@ -0,0 +1,222 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Common Codes for S5PC100
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/adc-core.h>
+#include <plat/ata-core.h>
+#include <plat/fb-core.h>
+#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PC100_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5PC100_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PC100_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PC100_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO,
+ .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S5PC100_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S5PC100_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC2,
+ .pfn = __phys_to_pfn(S5PC100_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC100_VA_OTHERS,
+ .pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }
+};
+
+/*
+ * s5pc100_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5pc100_map_io(void)
+{
+ /* initialise device information early */
+ s5pc100_default_sdhci0();
+ s5pc100_default_sdhci1();
+ s5pc100_default_sdhci2();
+
+ s3c_adc_setname("s3c64xx-adc");
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_onenand_setname("s5pc100-onenand");
+ s3c_fb_setname("s5pc100-fb");
+ s3c_cfcon_setname("s5pc100-pata");
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5pc100_register_clocks();
+ s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+ u32 vic[] = {~0, ~0, ~0};
+
+ /* VIC0, VIC1, and VIC2 are fully populated. */
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct bus_type s5pc100_subsys = {
+ .name = "s5pc100-core",
+ .dev_name = "s5pc100-core",
+};
+
+static struct device s5pc100_dev = {
+ .bus = &s5pc100_subsys,
+};
+
+static int __init s5pc100_core_init(void)
+{
+ return subsys_system_register(&s5pc100_subsys, NULL);
+}
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+ printk(KERN_INFO "S5PC100: Initializing architecture\n");
+ return device_register(&s5pc100_dev);
+}
+
+/* uart registration process */
+
+void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void s5pc100_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ soft_restart(0);
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/common.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/common.h
new file mode 100644
index 0000000..9fbd3ae
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5PC100 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
+#define __ARCH_ARM_MACH_S5PC100_COMMON_H
+
+void s5pc100_init_io(struct map_desc *mach_desc, int size);
+void s5pc100_init_irq(void);
+
+void s5pc100_register_clocks(void);
+void s5pc100_setup_clocks(void);
+
+void s5pc100_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/dev-audio.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/dev-audio.c
new file mode 100644
index 0000000..ab2d271
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/dev-audio.c
@@ -0,0 +1,347 @@
+/* linux/arch/arm/mach-s5pc100/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pc100_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 0: /* Dedicated pins */
+ break;
+ case 1:
+ s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
+ break;
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const char *rclksrc_v5[] = {
+ [0] = "iis",
+ [1] = "i2sclkd2",
+};
+
+static struct s3c_audio_pdata i2sv5_pdata = {
+ .cfg_gpio = s5pc100_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+ | QUIRK_NEED_RSTCLR,
+ .src_clk = rclksrc_v5,
+ },
+ },
+};
+
+static struct resource s5pc100_iis0_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_I2S0,
+ .end = S5PC100_PA_I2S0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_I2S0S_TX,
+ .end = DMACH_I2S0S_TX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_iis0 = {
+ .name = "samsung-i2s",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pc100_iis0_resource),
+ .resource = s5pc100_iis0_resource,
+ .dev = {
+ .platform_data = &i2sv5_pdata,
+ },
+};
+
+static const char *rclksrc_v3[] = {
+ [0] = "iis",
+ [1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+ .cfg_gpio = s5pc100_cfg_i2s,
+ .type = {
+ .i2s = {
+ .src_clk = rclksrc_v3,
+ },
+ },
+};
+
+static struct resource s5pc100_iis1_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_I2S1,
+ .end = S5PC100_PA_I2S1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_iis1 = {
+ .name = "samsung-i2s",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pc100_iis1_resource),
+ .resource = s5pc100_iis1_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+static struct resource s5pc100_iis2_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_I2S2,
+ .end = S5PC100_PA_I2S2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S2_TX,
+ .end = DMACH_I2S2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S2_RX,
+ .end = DMACH_I2S2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_iis2 = {
+ .name = "samsung-i2s",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pc100_iis2_resource),
+ .resource = s5pc100_iis2_resource,
+ .dev = {
+ .platform_data = &i2sv3_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
+ break;
+
+ case 1:
+ s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
+ break;
+
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = s5pc100_pcm_cfg_gpio,
+};
+
+static struct resource s5pc100_pcm0_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_PCM0,
+ .end = S5PC100_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pc100_pcm0_resource),
+ .resource = s5pc100_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pc100_pcm1_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_PCM1,
+ .end = S5PC100_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pc100_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pc100_pcm1_resource),
+ .resource = s5pc100_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
+{
+ return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource s5pc100_ac97_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_AC97,
+ .end = S5PC100_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+ .cfg_gpio = s5pc100_ac97_cfg_gpio,
+};
+
+static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_ac97 = {
+ .name = "samsung-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pc100_ac97_resource),
+ .resource = s5pc100_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s5pc100_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/* S/PDIF Controller platform_device */
+static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s5pc100_spdif_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_SPDIF,
+ .end = S5PC100_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s5p_spdif_pdata = {
+ .cfg_gpio = s5pc100_spdif_cfg_gpd,
+};
+
+static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pc100_spdif_resource),
+ .resource = s5pc100_spdif_resource,
+ .dev = {
+ .platform_data = &s5p_spdif_pdata,
+ .dma_mask = &s5pc100_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s5pc100_spdif_setup_gpio(int gpio)
+{
+ if (gpio == S5PC100_SPDIF_GPD)
+ s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
+ else
+ s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/dma.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/dma.c
new file mode 100644
index 0000000..afd8db2
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/dma.c
@@ -0,0 +1,132 @@
+/* linux/arch/arm/mach-s5pc100/dma.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static u8 pdma0_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_EXTERNAL,
+ DMACH_PWM,
+ DMACH_SPDIF,
+ DMACH_HSI_RX,
+ DMACH_HSI_TX,
+};
+
+static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
+ .peri_id = pdma0_peri,
+};
+
+static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
+ S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
+
+static u8 pdma1_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ2,
+ DMACH_MSM_REQ3,
+};
+
+static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
+ .peri_id = pdma1_peri,
+};
+
+static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
+ S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
+
+static int __init s5pc100_dma_init(void)
+{
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
+ amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
+ amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(s5pc100_dma_init);
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 0000000..694f759
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, = S3C_PA_UART
+ ldr \rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/dma.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/dma.h
new file mode 100644
index 0000000..201842a
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 0000000..bad0700
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ .endm
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/gpio.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 0000000..5e1a924
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,144 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+/* GPIO bank sizes */
+#define S5PC100_GPIO_A0_NR (8)
+#define S5PC100_GPIO_A1_NR (5)
+#define S5PC100_GPIO_B_NR (8)
+#define S5PC100_GPIO_C_NR (5)
+#define S5PC100_GPIO_D_NR (7)
+#define S5PC100_GPIO_E0_NR (8)
+#define S5PC100_GPIO_E1_NR (6)
+#define S5PC100_GPIO_F0_NR (8)
+#define S5PC100_GPIO_F1_NR (8)
+#define S5PC100_GPIO_F2_NR (8)
+#define S5PC100_GPIO_F3_NR (4)
+#define S5PC100_GPIO_G0_NR (8)
+#define S5PC100_GPIO_G1_NR (3)
+#define S5PC100_GPIO_G2_NR (7)
+#define S5PC100_GPIO_G3_NR (7)
+#define S5PC100_GPIO_H0_NR (8)
+#define S5PC100_GPIO_H1_NR (8)
+#define S5PC100_GPIO_H2_NR (8)
+#define S5PC100_GPIO_H3_NR (8)
+#define S5PC100_GPIO_I_NR (8)
+#define S5PC100_GPIO_J0_NR (8)
+#define S5PC100_GPIO_J1_NR (5)
+#define S5PC100_GPIO_J2_NR (8)
+#define S5PC100_GPIO_J3_NR (8)
+#define S5PC100_GPIO_J4_NR (4)
+#define S5PC100_GPIO_K0_NR (8)
+#define S5PC100_GPIO_K1_NR (6)
+#define S5PC100_GPIO_K2_NR (8)
+#define S5PC100_GPIO_K3_NR (8)
+#define S5PC100_GPIO_L0_NR (8)
+#define S5PC100_GPIO_L1_NR (8)
+#define S5PC100_GPIO_L2_NR (8)
+#define S5PC100_GPIO_L3_NR (8)
+#define S5PC100_GPIO_L4_NR (8)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC100_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5PC100_GPIO_A0_START = 0,
+ S5PC100_GPIO_A1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
+ S5PC100_GPIO_B_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
+ S5PC100_GPIO_C_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
+ S5PC100_GPIO_D_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
+ S5PC100_GPIO_E0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
+ S5PC100_GPIO_E1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
+ S5PC100_GPIO_F0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
+ S5PC100_GPIO_F1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
+ S5PC100_GPIO_F2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
+ S5PC100_GPIO_F3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
+ S5PC100_GPIO_G0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
+ S5PC100_GPIO_G1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
+ S5PC100_GPIO_G2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
+ S5PC100_GPIO_G3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
+ S5PC100_GPIO_H0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
+ S5PC100_GPIO_H1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
+ S5PC100_GPIO_H2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
+ S5PC100_GPIO_H3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
+ S5PC100_GPIO_I_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
+ S5PC100_GPIO_J0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
+ S5PC100_GPIO_J1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
+ S5PC100_GPIO_J2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
+ S5PC100_GPIO_J3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
+ S5PC100_GPIO_J4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
+ S5PC100_GPIO_K0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
+ S5PC100_GPIO_K1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
+ S5PC100_GPIO_K2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
+ S5PC100_GPIO_K3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
+ S5PC100_GPIO_L0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
+ S5PC100_GPIO_L1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
+ S5PC100_GPIO_L2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
+ S5PC100_GPIO_L3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
+ S5PC100_GPIO_L4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
+ S5PC100_GPIO_END = S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
+};
+
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr))
+
+/* It used the end of the S5PC100 gpios */
+#define S3C_GPIO_END S5PC100_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/hardware.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 0000000..6b38618
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/irqs.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 0000000..2870f12
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,117 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0: system, DMA, timer */
+#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
+#define IRQ_BATF S5P_IRQ_VIC0(17)
+#define IRQ_MDMA S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
+#define IRQ_WDT S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
+
+/* VIC1: ARM, power, memory, connectivity */
+#define IRQ_PMU S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND S5P_IRQ_VIC1(7)
+#define IRQ_NFC S5P_IRQ_VIC1(8)
+#define IRQ_CFCON S5P_IRQ_VIC1(9)
+#define IRQ_UART0 S5P_IRQ_VIC1(10)
+#define IRQ_UART1 S5P_IRQ_VIC1(11)
+#define IRQ_UART2 S5P_IRQ_VIC1(12)
+#define IRQ_UART3 S5P_IRQ_VIC1(13)
+#define IRQ_IIC S5P_IRQ_VIC1(14)
+#define IRQ_SPI0 S5P_IRQ_VIC1(15)
+#define IRQ_SPI1 S5P_IRQ_VIC1(16)
+#define IRQ_SPI2 S5P_IRQ_VIC1(17)
+#define IRQ_IRDA S5P_IRQ_VIC1(18)
+#define IRQ_IIC2 S5P_IRQ_VIC1(19)
+#define IRQ_IIC3 S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX S5P_IRQ_VIC1(21)
+#define IRQ_HSITX S5P_IRQ_VIC1(22)
+#define IRQ_UHOST S5P_IRQ_VIC1(23)
+#define IRQ_OTG S5P_IRQ_VIC1(24)
+#define IRQ_MSM S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
+
+/* VIC2: multimedia, audio, security */
+#define IRQ_LCD0 S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
+#define IRQ_JPEG S5P_IRQ_VIC2(8)
+#define IRQ_2D S5P_IRQ_VIC2(9)
+#define IRQ_3D S5P_IRQ_VIC2(10)
+#define IRQ_MIXER S5P_IRQ_VIC2(11)
+#define IRQ_HDMI S5P_IRQ_VIC2(12)
+#define IRQ_IIC1 S5P_IRQ_VIC2(13)
+#define IRQ_MFC S5P_IRQ_VIC2(14)
+#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 S5P_IRQ_VIC2(17)
+#define IRQ_I2S2 S5P_IRQ_VIC2(18)
+#define IRQ_AC97 S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF S5P_IRQ_VIC2(22)
+#define IRQ_ADC S5P_IRQ_VIC2(23)
+#define IRQ_PENDN S5P_IRQ_VIC2(24)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
+#define IRQ_CG S5P_IRQ_VIC2(26)
+#define IRQ_SEC S5P_IRQ_VIC2(27)
+#define IRQ_SECRX S5P_IRQ_VIC2(28)
+#define IRQ_SECTX S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
+#define IRQ_VIC_END S5P_IRQ_VIC2(31)
+
+#define IRQ_TIMER_BASE (11)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
+
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR 21
+
+/* Set the default NR_IRQS */
+#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
+
+/* Compatibility */
+#define IRQ_LCD_FIFO IRQ_LCD0
+#define IRQ_LCD_VSYNC IRQ_LCD1
+#define IRQ_LCD_SYSTEM IRQ_LCD2
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/map.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 0000000..54bc4f8
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,136 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5PC100_PA_SDRAM 0x20000000
+
+#define S5PC100_PA_ONENAND 0xE7100000
+#define S5PC100_PA_ONENAND_BUF 0xB0000000
+
+#define S5PC100_PA_CHIPID 0xE0000000
+
+#define S5PC100_PA_SYSCON 0xE0100000
+
+#define S5PC100_PA_OTHERS 0xE0200000
+
+#define S5PC100_PA_GPIO 0xE0300000
+
+#define S5PC100_PA_VIC0 0xE4000000
+#define S5PC100_PA_VIC1 0xE4100000
+#define S5PC100_PA_VIC2 0xE4200000
+
+#define S5PC100_PA_SROMC 0xE7000000
+
+#define S5PC100_PA_CFCON 0xE7800000
+
+#define S5PC100_PA_MDMA 0xE8100000
+#define S5PC100_PA_PDMA0 0xE9000000
+#define S5PC100_PA_PDMA1 0xE9200000
+
+#define S5PC100_PA_TIMER 0xEA000000
+#define S5PC100_PA_SYSTIMER 0xEA100000
+#define S5PC100_PA_WATCHDOG 0xEA200000
+#define S5PC100_PA_RTC 0xEA300000
+
+#define S5PC100_PA_UART 0xEC000000
+
+#define S5PC100_PA_IIC0 0xEC100000
+#define S5PC100_PA_IIC1 0xEC200000
+
+#define S5PC100_PA_SPI0 0xEC300000
+#define S5PC100_PA_SPI1 0xEC400000
+#define S5PC100_PA_SPI2 0xEC500000
+
+#define S5PC100_PA_USB_HSOTG 0xED200000
+#define S5PC100_PA_USB_HSPHY 0xED300000
+
+#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+
+#define S5PC100_PA_FB 0xEE000000
+
+#define S5PC100_PA_FIMC0 0xEE200000
+#define S5PC100_PA_FIMC1 0xEE300000
+#define S5PC100_PA_FIMC2 0xEE400000
+
+#define S5PC100_PA_I2S0 0xF2000000
+#define S5PC100_PA_I2S1 0xF2100000
+#define S5PC100_PA_I2S2 0xF2200000
+
+#define S5PC100_PA_AC97 0xF2300000
+
+#define S5PC100_PA_PCM0 0xF2400000
+#define S5PC100_PA_PCM1 0xF2500000
+
+#define S5PC100_PA_SPDIF 0xF2600000
+
+#define S5PC100_PA_TSADC 0xF3000000
+
+#define S5PC100_PA_KEYPAD 0xF3100000
+
+/* Compatibiltiy Defines */
+
+#define S3C_PA_FB S5PC100_PA_FB
+#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
+#define S3C_PA_IIC S5PC100_PA_IIC0
+#define S3C_PA_IIC1 S5PC100_PA_IIC1
+#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_ONENAND S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
+#define S3C_PA_RTC S5PC100_PA_RTC
+#define S3C_PA_TSADC S5PC100_PA_TSADC
+#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
+#define S3C_PA_WDT S5PC100_PA_WATCHDOG
+#define S3C_PA_SPI0 S5PC100_PA_SPI0
+#define S3C_PA_SPI1 S5PC100_PA_SPI1
+#define S3C_PA_SPI2 S5PC100_PA_SPI2
+
+#define S5P_PA_CHIPID S5PC100_PA_CHIPID
+#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+#define S5P_PA_SROMC S5PC100_PA_SROMC
+#define S5P_PA_SYSCON S5PC100_PA_SYSCON
+#define S5P_PA_TIMER S5PC100_PA_TIMER
+
+#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
+
+#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
+
+#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
+
+/* UART */
+
+#define S3C_PA_UART S5PC100_PA_UART
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+
+#define S5P_SZ_UART SZ_256
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-clock.h
new file mode 100644
index 0000000..bc92da2
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-clock.h
@@ -0,0 +1,80 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PC100 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_HPLL_LOCK S5P_CLKREG(0x0C)
+
+#define S5P_APLL_CON S5P_CLKREG(0x100)
+#define S5P_MPLL_CON S5P_CLKREG(0x104)
+#define S5P_EPLL_CON S5P_CLKREG(0x108)
+#define S5P_HPLL_CON S5P_CLKREG(0x10C)
+
+#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
+
+#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
+
+#define S5P_CLK_OUT S5P_CLKREG(0x400)
+
+#define S5P_CLKGATE_D00 S5P_CLKREG(0x500)
+#define S5P_CLKGATE_D01 S5P_CLKREG(0x504)
+#define S5P_CLKGATE_D02 S5P_CLKREG(0x508)
+
+#define S5P_CLKGATE_D10 S5P_CLKREG(0x520)
+#define S5P_CLKGATE_D11 S5P_CLKREG(0x524)
+#define S5P_CLKGATE_D12 S5P_CLKREG(0x528)
+#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C)
+#define S5P_CLKGATE_D14 S5P_CLKREG(0x530)
+#define S5P_CLKGATE_D15 S5P_CLKREG(0x534)
+
+#define S5P_CLKGATE_D20 S5P_CLKREG(0x540)
+
+#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560)
+#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_D0_MASK (0x7<<8)
+#define S5P_CLKDIV0_D0_SHIFT (8)
+#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12)
+#define S5P_CLKDIV0_PCLKD0_SHIFT (12)
+
+/* CLKDIV1 */
+#define S5P_CLKDIV1_D1_MASK (0x7<<12)
+#define S5P_CLKDIV1_D1_SHIFT (12)
+#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
+#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
+
+#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
+#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200)
+
+#define S5PC100_SWRESET_RESETVAL 0xc100
+
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
new file mode 100644
index 0000000..0bf7320
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO register definitions
+ */
+
+#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
+#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
+
+#define S5PC100EINT30FLTCON0 (S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x) (S5PC100EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PC100EINT30MASK (S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x) (S5PC100EINT30MASK + ((x) * 0x4))
+
+#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
+
+#define EINT_MODE S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x) S5PC100_GPH0(x)
+#define EINT_GPIO_1(x) S5PC100_GPH1(x)
+#define EINT_GPIO_2(x) S5PC100_GPH2(x)
+#define EINT_GPIO_3(x) S5PC100_GPH3(x)
+
+#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 0000000..4d9036d
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
new file mode 100644
index 0000000..65e4263
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5PC100_PLAT_SPI_CLKS_H
+#define __S5PC100_PLAT_SPI_CLKS_H __FILE__
+
+#define S5PC100_SPI_SRCCLK_PCLK 0
+#define S5PC100_SPI_SRCCLK_48M 1
+#define S5PC100_SPI_SRCCLK_SPIBUS 2
+
+#endif /* __S5PC100_PLAT_SPI_CLKS_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/tick.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 0000000..20f6873
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/timex.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/timex.h
new file mode 100644
index 0000000..47ffb17
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s5pc100/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/uncompress.h b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 0000000..01ccf53
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+ fifo_mask = S3C2440_UFSTAT_TXMASK;
+ fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/mach-smdkc100.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 0000000..674d229
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,260 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
+#include <plat/ata.h>
+#include <plat/adc.h>
+#include <plat/keypad.h>
+#include <plat/ts.h>
+#include <plat/audio.h>
+#include <plat/backlight.h>
+#include <plat/regs-fb-v4.h>
+
+#include "common.h"
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S3C2440_UFCON_RXTRIG8 | \
+ S3C2440_UFCON_TXTRIG16)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
+ },
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+ {I2C_BOARD_INFO("wm8580", 0x1b),},
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ /* module reset */
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(100);
+ gpio_direction_output(S5PC100_GPH0(6), 0);
+ mdelay(10);
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(10);
+ }
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+ .set_power = smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ .refresh = 80,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+ .win[0] = &smdkc100_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5pc100_fb_gpio_setup_24bpp,
+};
+
+static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
+ .setup_gpio = s5pc100_ide_setup_gpio,
+};
+
+static uint32_t smdkc100_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+ KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+ KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
+ .keymap = smdkc100_keymap,
+ .keymap_size = ARRAY_SIZE(smdkc100_keymap),
+};
+
+static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
+ .keymap_data = &smdkc100_keymap_data,
+ .rows = 2,
+ .cols = 8,
+};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+ &s3c_device_adc,
+ &s3c_device_cfcon,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_ts,
+ &s3c_device_wdt,
+ &smdkc100_lcd_powerdev,
+ &samsung_asoc_dma,
+ &s5pc100_device_iis0,
+ &samsung_device_keypad,
+ &s5pc100_device_ac97,
+ &s3c_device_rtc,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
+ &s5pc100_device_spdif,
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
+ .no = S5PC100_GPD(0),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdkc100_bl_data = {
+ .pwm_id = 0,
+};
+
+static void __init smdkc100_map_io(void)
+{
+ s5pc100_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+ s3c24xx_ts_set_platdata(NULL);
+
+ /* I2C */
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+ s3c_ide_set_platdata(&smdkc100_ide_pdata);
+
+ samsung_keypad_set_platdata(&smdkc100_keypad_data);
+
+ s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
+
+ /* LCD init */
+ gpio_request(S5PC100_GPH0(6), "GPH0");
+ smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
+
+ samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
+
+ platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+ /* Maintainer: Byungho Min <bhmin@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = s5pc100_init_irq,
+ .handle_irq = vic_handle_irq,
+ .map_io = smdkc100_map_io,
+ .init_machine = smdkc100_machine_init,
+ .timer = &s3c24xx_timer,
+ .restart = s5pc100_restart,
+MACHINE_END
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-fb-24bpp.c
new file mode 100644
index 0000000..8978e4c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-fb-24bpp.c
@@ -0,0 +1,35 @@
+/*
+ * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC100 setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#define DISR_OFFSET 0x7008
+
+static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
+{
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
+}
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+ s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-i2c0.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-i2c0.c
new file mode 100644
index 0000000..eaef7a3
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-i2c0.c
@@ -0,0 +1,28 @@
+/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC100 I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-i2c1.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-i2c1.c
new file mode 100644
index 0000000..aaff74a
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-i2c1.c
@@ -0,0 +1,28 @@
+/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC100 I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-ide.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-ide.c
new file mode 100644
index 0000000..223aae0
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-ide.c
@@ -0,0 +1,57 @@
+/* linux/arch/arm/mach-s5pc100/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PC100 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+ for (; nr > 0; nr--, base++)
+ s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
+void s5pc100_ide_setup_gpio(void)
+{
+ u32 reg;
+
+ /* Independent CF interface, CF chip select configuration */
+ reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
+ writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
+
+ /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
+
+ /*CF_Data[0 - 7] */
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
+
+ /* CF_Data[8 - 15] */
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
+
+ /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
+
+ /* EBI_OE, EBI_WE */
+ s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
+
+ /* CF_OE, CF_WE */
+ s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
+
+ /* CF_CD */
+ s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-keypad.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-keypad.c
new file mode 100644
index 0000000..ada377f
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-keypad.c
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5pc100/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * GPIO configuration for S5PC100 KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+ /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+ s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
+
+ /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+ s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
new file mode 100644
index 0000000..03c02d0
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int num;
+
+ num = width;
+ /* In case of 8 width, we should decrease the 2 */
+ if (width == 8)
+ num = width - 2;
+
+ /* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
+
+ if (width == 8)
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+ }
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set all the necessary GPG2 pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+ }
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set all the necessary GPG3 pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+ }
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-spi.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-spi.c
new file mode 100644
index 0000000..431a6f7
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-s5pc100/setup-spi.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif