zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-shmobile/board-g4evm.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-shmobile/board-g4evm.c
new file mode 100644
index 0000000..0e5a39c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-shmobile/board-g4evm.c
@@ -0,0 +1,385 @@
+/*
+ * G4EVM board support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <mach/irqs.h>
+#include <mach/sh7377.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+/*
+ * SDHI
+ *
+ * SDHI0 : card detection is possible
+ * SDHI1 : card detection is impossible
+ *
+ * [G4-MAIN-BOARD]
+ * JP74 : short # DBG_2V8A for SDHI0
+ * JP75 : NC # DBG_3V3A for SDHI0
+ * JP76 : NC # DBG_3V3A_SD for SDHI0
+ * JP77 : NC # 3V3A_SDIO for SDHI1
+ * JP78 : short # DBG_2V8A for SDHI1
+ * JP79 : NC # DBG_3V3A for SDHI1
+ * JP80 : NC # DBG_3V3A_SD for SDHI1
+ *
+ * [G4-CORE-BOARD]
+ * S32 : all off # to dissever from G3-CORE_DBG board
+ * S33 : all off # to dissever from G3-CORE_DBG board
+ *
+ * [G3-CORE_DBG-BOARD]
+ * S1 : all off # to dissever from G3-CORE_DBG board
+ * S3 : all off # to dissever from G3-CORE_DBG board
+ * S4 : all off # to dissever from G3-CORE_DBG board
+ */
+
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "kernel_ro",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = 0x08000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+/* USBHS */
+static void usb_host_port_power(int port, int power)
+{
+ if (!power) /* only power-on supported for now */
+ return;
+
+ /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+ __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+ .on_chip = 1,
+ .port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+ [0] = {
+ .name = "USBHS",
+ .start = 0xe6890000,
+ .end = 0xe68900e5,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0a20), /* USBHS_USHI0 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &usb_host_data,
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(usb_host_resources),
+ .resource = usb_host_resources,
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+ .mode = SH_KEYSC_MODE_5,
+ .scan_timing = 3,
+ .delay = 100,
+ .keycodes = {
+ KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+ KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
+ KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
+ KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
+ KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
+ KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+ KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
+ },
+};
+
+static struct resource keysc_resources[] = {
+ [0] = {
+ .name = "KEYSC",
+ .start = 0xe61b0000,
+ .end = 0xe61b000f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0be0), /* KEYSC_KEY */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device keysc_device = {
+ .name = "sh_keysc",
+ .id = 0, /* keysc0 clock */
+ .num_resources = ARRAY_SIZE(keysc_resources),
+ .resource = keysc_resources,
+ .dev = {
+ .platform_data = &keysc_info,
+ },
+};
+
+/* SDHI */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .tmio_caps = MMC_CAP_SDIO_IRQ,
+};
+
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0xe6d50000,
+ .end = 0xe6d500ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e00), /* SDHI0 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+};
+
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xe6d60000,
+ .end = 0xe6d600ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e80), /* SDHI1 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+};
+
+static struct platform_device *g4evm_devices[] __initdata = {
+ &nor_flash_device,
+ &usb_host_device,
+ &keysc_device,
+ &sdhi0_device,
+ &sdhi1_device,
+};
+
+#define GPIO_SDHID0_D0 0xe60520fc
+#define GPIO_SDHID0_D1 0xe60520fd
+#define GPIO_SDHID0_D2 0xe60520fe
+#define GPIO_SDHID0_D3 0xe60520ff
+#define GPIO_SDHICMD0 0xe6052100
+
+#define GPIO_SDHID1_D0 0xe6052103
+#define GPIO_SDHID1_D1 0xe6052104
+#define GPIO_SDHID1_D2 0xe6052105
+#define GPIO_SDHID1_D3 0xe6052106
+#define GPIO_SDHICMD1 0xe6052107
+
+/*
+ * FIXME !!
+ *
+ * gpio_pull_up is quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_pull_up(u32 addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xC0;
+ __raw_writeb(data, addr);
+}
+
+static void __init g4evm_init(void)
+{
+ sh7377_pinmux_init();
+
+ /* Lit DS14 LED */
+ gpio_request(GPIO_PORT109, NULL);
+ gpio_direction_output(GPIO_PORT109, 1);
+ gpio_export(GPIO_PORT109, 1);
+
+ /* Lit DS15 LED */
+ gpio_request(GPIO_PORT110, NULL);
+ gpio_direction_output(GPIO_PORT110, 1);
+ gpio_export(GPIO_PORT110, 1);
+
+ /* Lit DS16 LED */
+ gpio_request(GPIO_PORT112, NULL);
+ gpio_direction_output(GPIO_PORT112, 1);
+ gpio_export(GPIO_PORT112, 1);
+
+ /* Lit DS17 LED */
+ gpio_request(GPIO_PORT113, NULL);
+ gpio_direction_output(GPIO_PORT113, 1);
+ gpio_export(GPIO_PORT113, 1);
+
+ /* USBHS */
+ gpio_request(GPIO_FN_VBUS_0, NULL);
+ gpio_request(GPIO_FN_PWEN, NULL);
+ gpio_request(GPIO_FN_OVCN, NULL);
+ gpio_request(GPIO_FN_OVCN2, NULL);
+ gpio_request(GPIO_FN_EXTLP, NULL);
+ gpio_request(GPIO_FN_IDIN, NULL);
+
+ /* setup USB phy */
+ __raw_writew(0x0200, 0xe605810a); /* USBCR1 */
+ __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */
+ __raw_writew(0x6010, 0xe60581c6); /* CGPOSR */
+ __raw_writew(0x8a0a, 0xe605810c); /* USBCR2 */
+
+ /* KEYSC @ CN31 */
+ gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
+ gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
+ gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
+ gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
+ gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
+ gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
+ gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
+ gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
+ gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
+ gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
+
+ /* SDHI0 */
+ gpio_request(GPIO_FN_SDHICLK0, NULL);
+ gpio_request(GPIO_FN_SDHICD0, NULL);
+ gpio_request(GPIO_FN_SDHID0_0, NULL);
+ gpio_request(GPIO_FN_SDHID0_1, NULL);
+ gpio_request(GPIO_FN_SDHID0_2, NULL);
+ gpio_request(GPIO_FN_SDHID0_3, NULL);
+ gpio_request(GPIO_FN_SDHICMD0, NULL);
+ gpio_request(GPIO_FN_SDHIWP0, NULL);
+ gpio_pull_up(GPIO_SDHID0_D0);
+ gpio_pull_up(GPIO_SDHID0_D1);
+ gpio_pull_up(GPIO_SDHID0_D2);
+ gpio_pull_up(GPIO_SDHID0_D3);
+ gpio_pull_up(GPIO_SDHICMD0);
+
+ /* SDHI1 */
+ gpio_request(GPIO_FN_SDHICLK1, NULL);
+ gpio_request(GPIO_FN_SDHID1_0, NULL);
+ gpio_request(GPIO_FN_SDHID1_1, NULL);
+ gpio_request(GPIO_FN_SDHID1_2, NULL);
+ gpio_request(GPIO_FN_SDHID1_3, NULL);
+ gpio_request(GPIO_FN_SDHICMD1, NULL);
+ gpio_pull_up(GPIO_SDHID1_D0);
+ gpio_pull_up(GPIO_SDHID1_D1);
+ gpio_pull_up(GPIO_SDHID1_D2);
+ gpio_pull_up(GPIO_SDHID1_D3);
+ gpio_pull_up(GPIO_SDHICMD1);
+
+ sh7377_add_standard_devices();
+
+ platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
+}
+
+MACHINE_START(G4EVM, "g4evm")
+ .map_io = sh7377_map_io,
+ .init_early = sh7377_add_early_devices,
+ .init_irq = sh7377_init_irq,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = g4evm_init,
+ .timer = &shmobile_timer,
+MACHINE_END