zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/mach-ux500/platsmp.c b/ap/os/linux/linux-3.4.x/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 0000000..acc9da2
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+/* This is called from headsmp.S to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int pen_release = -1;
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not. This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+ pen_release = val;
+ smp_wmb();
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static void __iomem *scu_base_addr(void)
+{
+ if (cpu_is_u5500())
+ return __io_address(U5500_SCU_BASE);
+ else if (cpu_is_u8500())
+ return __io_address(U8500_SCU_BASE);
+ else
+ ux500_unknown_soc();
+
+ return NULL;
+}
+
+static DEFINE_RAW_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ write_pen_release(-1);
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ raw_spin_lock(&boot_lock);
+ raw_spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ raw_spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ */
+ write_pen_release(cpu_logical_map(cpu));
+
+ smp_send_reschedule(cpu);
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ if (pen_release == -1)
+ break;
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ raw_spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+ void __iomem *backupram;
+
+ if (cpu_is_u5500())
+ backupram = __io_address(U5500_BACKUPRAM0_BASE);
+ else if (cpu_is_u8500())
+ backupram = __io_address(U8500_BACKUPRAM0_BASE);
+ else
+ ux500_unknown_soc();
+
+ /*
+ * write the address of secondary startup into the backup ram register
+ * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+ * backup ram register at offset 0x1FF0, which is what boot rom code
+ * is waiting for. This would wake up the secondary core from WFE
+ */
+#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
+ __raw_writel(virt_to_phys(u8500_secondary_startup),
+ backupram + UX500_CPU1_JUMPADDR_OFFSET);
+
+#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+ __raw_writel(0xA1FEED01,
+ backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
+
+ /* make sure write buffer is drained */
+ mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ void __iomem *scu_base = scu_base_addr();
+ unsigned int i, ncores;
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ /* sanity check */
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+ scu_enable(scu_base_addr());
+ wakeup_secondary();
+}