zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/Kconfig b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/Kconfig
new file mode 100644
index 0000000..ad95c7a
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/Kconfig
@@ -0,0 +1,208 @@
+if ARCH_OMAP
+
+menu "TI OMAP Common Features"
+
+config ARCH_OMAP_OTG
+ bool
+
+choice
+ prompt "OMAP System Type"
+ default ARCH_OMAP2PLUS
+
+config ARCH_OMAP1
+ bool "TI OMAP1"
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select HAVE_IDE
+ select NEED_MACH_MEMORY_H
+ select NEED_MACH_IO_H if PCCARD
+ help
+ "Systems based on omap7xx, omap15xx or omap16xx"
+
+config ARCH_OMAP2PLUS
+ bool "TI OMAP2/3/4"
+ select CLKDEV_LOOKUP
+ select GENERIC_IRQ_CHIP
+ select OMAP_DM_TIMER
+ select USE_OF
+ select PROC_DEVICETREE if PROC_FS
+ help
+ "Systems based on OMAP2, OMAP3 or OMAP4"
+
+endchoice
+
+comment "OMAP Feature Selections"
+
+config OMAP_DEBUG_DEVICES
+ bool
+ help
+ For debug cards on TI reference boards.
+
+config OMAP_DEBUG_LEDS
+ bool
+ depends on OMAP_DEBUG_DEVICES
+ default y if LEDS_CLASS
+
+config OMAP_SMARTREFLEX
+ bool "SmartReflex support"
+ depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+ help
+ Say Y if you want to enable SmartReflex.
+
+ SmartReflex can perform continuous dynamic voltage
+ scaling around the nominal operating point voltage
+ according to silicon characteristics and operating
+ conditions. Enabling SmartReflex reduces power
+ consumption.
+
+ Please note, that by default SmartReflex is only
+ initialized. To enable the automatic voltage
+ compensation for vdd mpu and vdd core from user space,
+ user must write 1 to
+ /debug/voltage/vdd_<X>/smartreflex/autocomp,
+ where X is mpu or core for OMAP3.
+ Optionally autocompensation can be enabled in the kernel
+ by default during system init via the enable_on_init flag
+ which an be passed as platform data to the smartreflex driver.
+
+config OMAP_SMARTREFLEX_CLASS3
+ bool "Class 3 mode of Smartreflex Implementation"
+ depends on OMAP_SMARTREFLEX && TWL4030_CORE
+ help
+ Say Y to enable Class 3 implementation of Smartreflex
+
+ Class 3 implementation of Smartreflex employs continuous hardware
+ voltage calibration.
+
+config OMAP_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_OMAP
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
+
+config OMAP_MUX
+ bool "OMAP multiplexing support"
+ depends on ARCH_OMAP
+ default y
+ help
+ Pin multiplexing support for OMAP boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config OMAP_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on OMAP_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config OMAP_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on OMAP_MUX
+ default y
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect OMAP_MUX for your product.
+
+config OMAP_MBOX_FWK
+ tristate "Mailbox framework support"
+ depends on ARCH_OMAP
+ help
+ Say Y here if you want to use OMAP Mailbox framework support for
+ DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+
+config OMAP_MBOX_KFIFO_SIZE
+ int "Mailbox kfifo default buffer size (bytes)"
+ depends on OMAP_MBOX_FWK
+ default 256
+ help
+ Specify the default size of mailbox's kfifo buffers (bytes).
+ This can also be changed at runtime (via the mbox_kfifo_size
+ module parameter).
+
+config OMAP_IOMMU_IVA2
+ bool
+
+config OMAP_MPU_TIMER
+ bool "Use mpu timer"
+ depends on ARCH_OMAP1
+ help
+ Select this option if you want to use the OMAP mpu timer. This
+ timer provides more intra-tick resolution than the 32KHz timer,
+ but consumes more power.
+
+config OMAP_32K_TIMER
+ bool "Use 32KHz timer"
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+ default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
+ help
+ Select this option if you want to enable the OMAP 32KHz timer.
+ This timer saves power compared to the OMAP_MPU_TIMER, and has
+ support for no tick during idle. The 32KHz timer provides less
+ intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
+
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+ depends on ARCH_OMAP3 && PM
+ default n
+ help
+ Without this option, L2 Auxiliary control register contents are
+ lost during off-mode entry on HS/EMU devices. This feature
+ requires support from PPA / boot-loader in HS/EMU devices, which
+ currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ int "Service ID for the support routine to set L2 AUX control"
+ depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ default 43
+ help
+ PPA routine service ID for setting L2 auxiliary control register.
+
+config OMAP_32K_TIMER_HZ
+ int "Kernel internal timer frequency for 32KHz timer"
+ range 32 1024
+ depends on OMAP_32K_TIMER
+ default "128"
+ help
+ Kernel internal timer frequency should be a divisor of 32768,
+ such as 64 or 128.
+
+config OMAP_DM_TIMER
+ bool "Use dual-mode timer"
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+ help
+ Select this option if you want to use OMAP Dual-Mode timers.
+
+config OMAP_SERIAL_WAKE
+ bool "Enable wake-up events for serial ports"
+ depends on ARCH_OMAP1 && OMAP_MUX
+ default y
+ help
+ Select this option if you want to have your system wake up
+ to data on the serial RX line. This allows you to wake the
+ system from serial console.
+
+choice
+ prompt "OMAP PM layer selection"
+ depends on ARCH_OMAP
+ default OMAP_PM_NOOP
+
+config OMAP_PM_NOOP
+ bool "No-op/debug PM layer"
+
+endchoice
+
+endmenu
+
+endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/Makefile b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/Makefile
new file mode 100644
index 0000000..c0fe275
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/Makefile
@@ -0,0 +1,29 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
+ usb.o fb.o counter_32k.o
+obj-m :=
+obj-n :=
+obj- :=
+
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
+# omap_device support (OMAP2+ only at the moment)
+obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
+
+obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
+obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
+obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
+
+# OMAP mailbox framework
+obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
+
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/clock.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/clock.c
new file mode 100644
index 0000000..62ec5c4
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/clock.c
@@ -0,0 +1,569 @@
+/*
+ * linux/arch/arm/plat-omap/clock.c
+ *
+ * Copyright (C) 2004 - 2008 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
+static struct clk_functions *arch_clock;
+
+/*
+ * Standard clock functions defined in include/linux/clk.h
+ */
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ if (!arch_clock || !arch_clock->clk_enable)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = arch_clock->clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ if (!arch_clock || !arch_clock->clk_disable)
+ return;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ pr_err("Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
+ arch_clock->clk_disable(clk);
+
+out:
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ if (!arch_clock || !arch_clock->clk_round_rate)
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = arch_clock->clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ if (!arch_clock || !arch_clock->clk_set_rate)
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = arch_clock->clk_set_rate(clk, rate);
+ if (ret == 0)
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
+ return ret;
+
+ if (!arch_clock || !arch_clock->clk_set_parent)
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ ret = arch_clock->clk_set_parent(clk, parent);
+ if (ret == 0)
+ propagate_rate(clk);
+ } else
+ ret = -EBUSY;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+ get_option(&str, &mpurate);
+
+ if (!mpurate)
+ return 1;
+
+ if (mpurate < 1000)
+ mpurate *= 1000000;
+
+ return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+ return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
+ mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
+ list_add(&clk->node, &clocks);
+ if (clk->init)
+ clk->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clocks, node) {
+ if (clkp->flags & ENABLE_ON_INIT)
+ clk_enable(clkp);
+ }
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ if (!arch_clock || !arch_clock->clk_disable_unused)
+ return 0;
+
+ pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || !ck->enable_reg)
+ continue;
+
+ arch_clock->clk_disable_unused(ck);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+int __init clk_init(struct clk_functions * custom_clocks)
+{
+ if (!custom_clocks) {
+ pr_err("No custom clock functions registered\n");
+ BUG();
+ }
+
+ arch_clock = custom_clocks;
+
+ return 0;
+}
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate, c->usecount);
+ }
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d;
+ struct clk *pa = c->parent;
+
+ d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/common.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/common.c
new file mode 100644
index 0000000..f1e46ea
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/common.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/arm/plat-omap/common.c
+ *
+ * Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/vram.h>
+#include <plat/dsp.h>
+
+#include <plat/omap-secure.h>
+
+
+#define NO_LENGTH_CHECK 0xffffffff
+
+struct omap_board_config_kernel *omap_board_config __initdata;
+int omap_board_config_size;
+
+static const void *__init get_config(u16 tag, size_t len,
+ int skip, size_t *len_out)
+{
+ struct omap_board_config_kernel *kinfo = NULL;
+ int i;
+
+ /* Try to find the config from the board-specific structures
+ * in the kernel. */
+ for (i = 0; i < omap_board_config_size; i++) {
+ if (omap_board_config[i].tag == tag) {
+ if (skip == 0) {
+ kinfo = &omap_board_config[i];
+ break;
+ } else {
+ skip--;
+ }
+ }
+ }
+ if (kinfo == NULL)
+ return NULL;
+ return kinfo->data;
+}
+
+const void *__init __omap_get_config(u16 tag, size_t len, int nr)
+{
+ return get_config(tag, len, nr, NULL);
+}
+
+const void *__init omap_get_var_config(u16 tag, size_t *len)
+{
+ return get_config(tag, NO_LENGTH_CHECK, 0, len);
+}
+
+void __init omap_reserve(void)
+{
+ omap_vram_reserve_sdram_memblock();
+ omap_dsp_reserve_sdram_memblock();
+ omap_secure_ram_reserve_memblock();
+ omap_barrier_reserve_memblock();
+}
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+ init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/counter_32k.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/counter_32k.c
new file mode 100644
index 0000000..fd433e7
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/counter_32k.c
@@ -0,0 +1,128 @@
+/*
+ * OMAP 32ksynctimer/counter_32k-related code
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE: This timer is not the same timer as the old OMAP1 MPU timer.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+
+#include <asm/sched_clock.h>
+
+#include <plat/hardware.h>
+#include <plat/common.h>
+#include <plat/board.h>
+
+#include <plat/clock.h>
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510. Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+static void __iomem *timer_32k_base;
+
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
+
+static u32 notrace omap_32k_read_sched_clock(void)
+{
+ return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
+}
+
+/**
+ * read_persistent_clock - Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer. Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles;
+static unsigned int persistent_mult, persistent_shift;
+static DEFINE_SPINLOCK(read_persistent_clock_lock);
+
+void read_persistent_clock(struct timespec *ts)
+{
+ unsigned long long nsecs;
+ cycles_t last_cycles;
+ unsigned long flags;
+
+ spin_lock_irqsave(&read_persistent_clock_lock, flags);
+
+ last_cycles = cycles;
+ cycles = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
+
+ nsecs = clocksource_cyc2ns(cycles - last_cycles,
+ persistent_mult, persistent_shift);
+
+ timespec_add_ns(&persistent_ts, nsecs);
+
+ *ts = persistent_ts;
+
+ spin_unlock_irqrestore(&read_persistent_clock_lock, flags);
+}
+
+int __init omap_init_clocksource_32k(void)
+{
+ static char err[] __initdata = KERN_ERR
+ "%s: can't register clocksource!\n";
+
+ if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
+ u32 pbase;
+ unsigned long size = SZ_4K;
+ void __iomem *base;
+ struct clk *sync_32k_ick;
+
+ if (cpu_is_omap16xx()) {
+ pbase = OMAP16XX_TIMER_32K_SYNCHRONIZED;
+ size = SZ_1K;
+ } else if (cpu_is_omap2420())
+ pbase = OMAP2420_32KSYNCT_BASE + 0x10;
+ else if (cpu_is_omap2430())
+ pbase = OMAP2430_32KSYNCT_BASE + 0x10;
+ else if (cpu_is_omap34xx())
+ pbase = OMAP3430_32KSYNCT_BASE + 0x10;
+ else if (cpu_is_omap44xx())
+ pbase = OMAP4430_32KSYNCT_BASE + 0x10;
+ else
+ return -ENODEV;
+
+ /* For this to work we must have a static mapping in io.c for this area */
+ base = ioremap(pbase, size);
+ if (!base)
+ return -ENODEV;
+
+ sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
+ if (!IS_ERR(sync_32k_ick))
+ clk_enable(sync_32k_ick);
+
+ timer_32k_base = base;
+
+ /*
+ * 120000 rough estimate from the calculations in
+ * __clocksource_updatefreq_scale.
+ */
+ clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
+ 32768, NSEC_PER_SEC, 120000);
+
+ if (clocksource_mmio_init(base, "32k_counter", 32768, 250, 32,
+ clocksource_mmio_readl_up))
+ printk(err, "32k_counter");
+
+ setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
+ }
+ return 0;
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/debug-devices.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/debug-devices.c
new file mode 100644
index 0000000..caa1f7b
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/debug-devices.c
@@ -0,0 +1,95 @@
+/*
+ * linux/arch/arm/plat-omap/debug-devices.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Modified from mach-omap2/board-h4.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/hardware.h>
+
+#include <plat/board.h>
+
+
+/* Many OMAP development platforms reuse the same "debug board"; these
+ * platforms include H2, H3, H4, and Perseus2.
+ */
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct resource led_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device led_device = {
+ .name = "omap_dbg_led",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(led_resources),
+ .resource = led_resources,
+};
+
+static struct platform_device *debug_devices[] __initdata = {
+ &smc91x_device,
+ &led_device,
+ /* ps2 kbd + mouse ports */
+ /* 4 extra uarts */
+ /* 6 input dip switches */
+ /* 8 output pins */
+};
+
+int __init debug_card_init(u32 addr, unsigned gpio)
+{
+ int status;
+
+ smc91x_resources[0].start = addr + 0x300;
+ smc91x_resources[0].end = addr + 0x30f;
+
+ smc91x_resources[1].start = gpio_to_irq(gpio);
+ smc91x_resources[1].end = gpio_to_irq(gpio);
+
+ status = gpio_request(gpio, "SMC91x irq");
+ if (status < 0) {
+ printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
+ return status;
+ }
+ gpio_direction_input(gpio);
+
+ led_resources[0].start = addr;
+ led_resources[0].end = addr + SZ_4K - 1;
+
+ return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/debug-leds.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/debug-leds.c
new file mode 100644
index 0000000..39407cb
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/debug-leds.c
@@ -0,0 +1,315 @@
+/*
+ * linux/arch/arm/plat-omap/debug-leds.c
+ *
+ * Copyright 2003 by Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+#include <plat/fpga.h>
+
+
+/* Many OMAP development platforms reuse the same "debug board"; these
+ * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
+ * debug board (all green), accessed through FPGA registers.
+ *
+ * The "surfer" expansion board and H2 sample board also have two-color
+ * green+red LEDs (in parallel), used here for timer and idle indicators
+ * in preference to the ones on the debug board, for a "Disco LED" effect.
+ *
+ * This driver exports either the original ARM LED API, the new generic
+ * one, or both.
+ */
+
+static spinlock_t lock;
+static struct h2p2_dbg_fpga __iomem *fpga;
+static u16 led_state, hw_led_state;
+
+
+#ifdef CONFIG_OMAP_DEBUG_LEDS
+#define new_led_api() 1
+#else
+#define new_led_api() 0
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/* original ARM debug LED API:
+ * - timer and idle leds (some boards use non-FPGA leds here);
+ * - up to 4 generic leds, easily accessed in-kernel (any context)
+ */
+
+#define GPIO_LED_RED 3
+#define GPIO_LED_GREEN OMAP_MPUIO(4)
+
+#define LED_STATE_ENABLED 0x01
+#define LED_STATE_CLAIMED 0x02
+#define LED_TIMER_ON 0x04
+
+#define GPIO_IDLE GPIO_LED_GREEN
+#define GPIO_TIMER GPIO_LED_RED
+
+static void h2p2_dbg_leds_event(led_event_t evt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lock, flags);
+
+ if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
+ goto done;
+
+ switch (evt) {
+ case led_start:
+ if (fpga)
+ led_state |= LED_STATE_ENABLED;
+ break;
+
+ case led_stop:
+ case led_halted:
+ /* all leds off during suspend or shutdown */
+
+ if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
+ gpio_set_value(GPIO_TIMER, 0);
+ gpio_set_value(GPIO_IDLE, 0);
+ }
+
+ __raw_writew(~0, &fpga->leds);
+ led_state &= ~LED_STATE_ENABLED;
+ goto done;
+
+ case led_claim:
+ led_state |= LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+ case led_release:
+ led_state &= ~LED_STATE_CLAIMED;
+ break;
+
+#ifdef CONFIG_LEDS_TIMER
+ case led_timer:
+ led_state ^= LED_TIMER_ON;
+
+ if (machine_is_omap_perseus2() || machine_is_omap_h4())
+ hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
+ else {
+ gpio_set_value(GPIO_TIMER,
+ led_state & LED_TIMER_ON);
+ goto done;
+ }
+
+ break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+ /* LED lit iff busy */
+ case led_idle_start:
+ if (machine_is_omap_perseus2() || machine_is_omap_h4())
+ hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
+ else {
+ gpio_set_value(GPIO_IDLE, 1);
+ goto done;
+ }
+
+ break;
+
+ case led_idle_end:
+ if (machine_is_omap_perseus2() || machine_is_omap_h4())
+ hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
+ else {
+ gpio_set_value(GPIO_IDLE, 0);
+ goto done;
+ }
+
+ break;
+#endif
+
+ case led_green_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
+ break;
+ case led_green_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
+ break;
+
+ case led_amber_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
+ break;
+ case led_amber_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
+ break;
+
+ case led_red_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_RED;
+ break;
+ case led_red_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
+ break;
+
+ case led_blue_on:
+ hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
+ break;
+ case led_blue_off:
+ hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
+ break;
+
+ default:
+ break;
+ }
+
+
+ /*
+ * Actually burn the LEDs
+ */
+ if (led_state & LED_STATE_ENABLED)
+ __raw_writew(~hw_led_state, &fpga->leds);
+
+done:
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* "new" LED API
+ * - with syfs access and generic triggering
+ * - not readily accessible to in-kernel drivers
+ */
+
+struct dbg_led {
+ struct led_classdev cdev;
+ u16 mask;
+};
+
+static struct dbg_led dbg_leds[] = {
+ /* REVISIT at least H2 uses different timer & cpu leds... */
+#ifndef CONFIG_LEDS_TIMER
+ { .mask = 1 << 0, .cdev.name = "d4:green",
+ .cdev.default_trigger = "heartbeat", },
+#endif
+#ifndef CONFIG_LEDS_CPU
+ { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
+#endif
+ { .mask = 1 << 2, .cdev.name = "d6:green", },
+ { .mask = 1 << 3, .cdev.name = "d7:green", },
+
+ { .mask = 1 << 4, .cdev.name = "d8:green", },
+ { .mask = 1 << 5, .cdev.name = "d9:green", },
+ { .mask = 1 << 6, .cdev.name = "d10:green", },
+ { .mask = 1 << 7, .cdev.name = "d11:green", },
+
+ { .mask = 1 << 8, .cdev.name = "d12:green", },
+ { .mask = 1 << 9, .cdev.name = "d13:green", },
+ { .mask = 1 << 10, .cdev.name = "d14:green", },
+ { .mask = 1 << 11, .cdev.name = "d15:green", },
+
+#ifndef CONFIG_LEDS
+ { .mask = 1 << 12, .cdev.name = "d16:green", },
+ { .mask = 1 << 13, .cdev.name = "d17:green", },
+ { .mask = 1 << 14, .cdev.name = "d18:green", },
+ { .mask = 1 << 15, .cdev.name = "d19:green", },
+#endif
+};
+
+static void
+fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+{
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lock, flags);
+ if (value == LED_OFF)
+ hw_led_state &= ~led->mask;
+ else
+ hw_led_state |= led->mask;
+ __raw_writew(~hw_led_state, &fpga->leds);
+ spin_unlock_irqrestore(&lock, flags);
+}
+
+static void __init newled_init(struct device *dev)
+{
+ unsigned i;
+ struct dbg_led *led;
+ int status;
+
+ for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
+ led->cdev.brightness_set = fpga_led_set;
+ status = led_classdev_register(dev, &led->cdev);
+ if (status < 0)
+ break;
+ }
+ return;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int /* __init */ fpga_probe(struct platform_device *pdev)
+{
+ struct resource *iomem;
+
+ spin_lock_init(&lock);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem)
+ return -ENODEV;
+
+ fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
+ __raw_writew(~0, &fpga->leds);
+
+#ifdef CONFIG_LEDS
+ leds_event = h2p2_dbg_leds_event;
+ leds_event(led_start);
+#endif
+
+ if (new_led_api()) {
+ newled_init(&pdev->dev);
+ }
+
+ return 0;
+}
+
+static int fpga_suspend_noirq(struct device *dev)
+{
+ __raw_writew(~0, &fpga->leds);
+ return 0;
+}
+
+static int fpga_resume_noirq(struct device *dev)
+{
+ __raw_writew(~hw_led_state, &fpga->leds);
+ return 0;
+}
+
+static const struct dev_pm_ops fpga_dev_pm_ops = {
+ .suspend_noirq = fpga_suspend_noirq,
+ .resume_noirq = fpga_resume_noirq,
+};
+
+static struct platform_driver led_driver = {
+ .driver.name = "omap_dbg_led",
+ .driver.pm = &fpga_dev_pm_ops,
+ .probe = fpga_probe,
+};
+
+static int __init fpga_init(void)
+{
+ if (machine_is_omap_h4()
+ || machine_is_omap_h3()
+ || machine_is_omap_h2()
+ || machine_is_omap_perseus2()
+ )
+ return platform_driver_register(&led_driver);
+ return 0;
+}
+fs_initcall(fpga_init);
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/devices.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/devices.c
new file mode 100644
index 0000000..60278f4
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/devices.c
@@ -0,0 +1,214 @@
+/*
+ * linux/arch/arm/plat-omap/devices.c
+ *
+ * Common platform device setup/initialization for OMAP1 and OMAP2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/memblock.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/memblock.h>
+
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/menelaus.h>
+#include <plat/omap44xx.h>
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+#define OMAP_MMC_NR_RES 2
+
+/*
+ * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
+ */
+int __init omap_mmc_add(const char *name, int id, unsigned long base,
+ unsigned long size, unsigned int irq,
+ struct omap_mmc_platform_data *data)
+{
+ struct platform_device *pdev;
+ struct resource res[OMAP_MMC_NR_RES];
+ int ret;
+
+ pdev = platform_device_alloc(name, id);
+ if (!pdev)
+ return -ENOMEM;
+
+ memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+ res[0].start = base;
+ res[0].end = base + size - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = res[1].end = irq;
+ res[1].flags = IORESOURCE_IRQ;
+
+ ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+ if (ret == 0)
+ ret = platform_device_add_data(pdev, data, sizeof(*data));
+ if (ret)
+ goto fail;
+
+ ret = platform_device_add(pdev);
+ if (ret)
+ goto fail;
+
+ /* return device handle to board setup code */
+ data->dev = &pdev->dev;
+ return 0;
+
+fail:
+ platform_device_put(pdev);
+ return ret;
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+#define OMAP_RNG_BASE 0x480A0000
+#else
+#define OMAP_RNG_BASE 0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+ {
+ .start = OMAP_RNG_BASE,
+ .end = OMAP_RNG_BASE + 0x4f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_rng_device = {
+ .name = "omap_rng",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rng_resources),
+ .resource = rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+ (void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* Numbering for the SPI-capable controllers when used for SPI:
+ * spi = 1
+ * uwire = 2
+ * mmc1..2 = 3..4
+ * mcbsp1..3 = 5..7
+ */
+
+#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+
+#define OMAP_UWIRE_BASE 0xfffb3000
+
+static struct resource uwire_resources[] = {
+ {
+ .start = OMAP_UWIRE_BASE,
+ .end = OMAP_UWIRE_BASE + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_uwire_device = {
+ .name = "omap_uwire",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(uwire_resources),
+ .resource = uwire_resources,
+};
+
+static void omap_init_uwire(void)
+{
+ /* FIXME define and use a boot tag; not all boards will be hooking
+ * up devices to the microwire controller, and multi-board configs
+ * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
+ */
+
+ /* board-specific code must configure chipselects (only a few
+ * are normally used) and SCLK/SDI/SDO (each has two choices).
+ */
+ (void) platform_device_register(&omap_uwire_device);
+}
+#else
+static inline void omap_init_uwire(void) {}
+#endif
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+
+static phys_addr_t omap_dsp_phys_mempool_base;
+
+void __init omap_dsp_reserve_sdram_memblock(void)
+{
+ phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+ phys_addr_t paddr;
+
+ if (!size)
+ return;
+
+ paddr = arm_memblock_steal(size, SZ_1M);
+ if (!paddr) {
+ pr_err("%s: failed to reserve %x bytes\n",
+ __func__, size);
+ return;
+ }
+
+ omap_dsp_phys_mempool_base = paddr;
+}
+
+phys_addr_t omap_dsp_get_mempool_base(void)
+{
+ return omap_dsp_phys_mempool_base;
+}
+EXPORT_SYMBOL(omap_dsp_get_mempool_base);
+#endif
+
+/*
+ * This gets called after board-specific INIT_MACHINE, and initializes most
+ * on-chip peripherals accessible on this board (except for few like USB):
+ *
+ * (a) Does any "standard config" pin muxing needed. Board-specific
+ * code will have muxed GPIO pins and done "nonstandard" setup;
+ * that code could live in the boot loader.
+ * (b) Populating board-specific platform_data with the data drivers
+ * rely on to handle wiring variations.
+ * (c) Creating platform devices as meaningful on this board and
+ * with this kernel configuration.
+ *
+ * Claiming GPIOs, and setting their direction and initial values, is the
+ * responsibility of the device drivers. So is responding to probe().
+ *
+ * Board-specific knowledge like creating devices or pin setup is to be
+ * kept out of drivers as much as possible. In particular, pin setup
+ * may be handled by the boot loader, and drivers should expect it will
+ * normally have been done by the time they're probed.
+ */
+static int __init omap_init_devices(void)
+{
+ /* please keep these calls, and their implementations above,
+ * in alphabetical order so they're easier to sort through.
+ */
+ omap_init_rng();
+ omap_init_uwire();
+ return 0;
+}
+arch_initcall(omap_init_devices);
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/dma.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/dma.c
new file mode 100644
index 0000000..c58d896
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/dma.c
@@ -0,0 +1,2178 @@
+/*
+ * linux/arch/arm/plat-omap/dma.c
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into DMA platform driver.
+ * - G, Manjunath Kondaiah <manjugk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <plat/dma.h>
+
+#include <plat/tc.h>
+
+#undef DEBUG
+
+#ifndef CONFIG_ARCH_OMAP1
+enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
+ DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
+};
+
+enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
+#endif
+
+#define OMAP_DMA_ACTIVE 0x01
+#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff
+
+#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
+
+static struct omap_system_dma_plat_info *p;
+static struct omap_dma_dev_attr *d;
+
+static int enable_1510_mode;
+static u32 errata;
+
+static struct omap_dma_global_context_registers {
+ u32 dma_irqenable_l0;
+ u32 dma_ocp_sysconfig;
+ u32 dma_gcr;
+} omap_dma_global_context;
+
+struct dma_link_info {
+ int *linked_dmach_q;
+ int no_of_lchs_linked;
+
+ int q_count;
+ int q_tail;
+ int q_head;
+
+ int chain_state;
+ int chain_mode;
+
+};
+
+static struct dma_link_info *dma_linked_lch;
+
+#ifndef CONFIG_ARCH_OMAP1
+
+/* Chain handling macros */
+#define OMAP_DMA_CHAIN_QINIT(chain_id) \
+ do { \
+ dma_linked_lch[chain_id].q_head = \
+ dma_linked_lch[chain_id].q_tail = \
+ dma_linked_lch[chain_id].q_count = 0; \
+ } while (0)
+#define OMAP_DMA_CHAIN_QFULL(chain_id) \
+ (dma_linked_lch[chain_id].no_of_lchs_linked == \
+ dma_linked_lch[chain_id].q_count)
+#define OMAP_DMA_CHAIN_QLAST(chain_id) \
+ do { \
+ ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \
+ dma_linked_lch[chain_id].q_count) \
+ } while (0)
+#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
+ (0 == dma_linked_lch[chain_id].q_count)
+#define __OMAP_DMA_CHAIN_INCQ(end) \
+ ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
+#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
+ do { \
+ __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
+ dma_linked_lch[chain_id].q_count--; \
+ } while (0)
+
+#define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \
+ do { \
+ __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
+ dma_linked_lch[chain_id].q_count++; \
+ } while (0)
+#endif
+
+static int dma_lch_count;
+static int dma_chan_count;
+static int omap_dma_reserve_channels;
+
+static spinlock_t dma_chan_lock;
+static struct omap_dma_lch *dma_chan;
+
+static inline void disable_lnk(int lch);
+static void omap_disable_channel_irq(int lch);
+static inline void omap_enable_channel_irq(int lch);
+
+#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
+ __func__);
+
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+static int omap_dma_in_1510_mode(void)
+{
+ return enable_1510_mode;
+}
+#else
+#define omap_dma_in_1510_mode() 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+static inline int get_gdma_dev(int req)
+{
+ u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
+ int shift = ((req - 1) % 5) * 6;
+
+ return ((omap_readl(reg) >> shift) & 0x3f) + 1;
+}
+
+static inline void set_gdma_dev(int req, int dev)
+{
+ u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
+ int shift = ((req - 1) % 5) * 6;
+ u32 l;
+
+ l = omap_readl(reg);
+ l &= ~(0x3f << shift);
+ l |= (dev - 1) << shift;
+ omap_writel(l, reg);
+}
+#else
+#define set_gdma_dev(req, dev) do {} while (0)
+#define omap_readl(reg) 0
+#define omap_writel(val, reg) do {} while (0)
+#endif
+
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+ unsigned long reg;
+ u32 l;
+
+ if (cpu_class_is_omap1()) {
+ switch (dst_port) {
+ case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
+ reg = OMAP_TC_OCPT1_PRIOR;
+ break;
+ case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
+ reg = OMAP_TC_OCPT2_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
+ reg = OMAP_TC_EMIFF_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
+ reg = OMAP_TC_EMIFS_PRIOR;
+ break;
+ default:
+ BUG();
+ return;
+ }
+ l = omap_readl(reg);
+ l &= ~(0xf << 8);
+ l |= (priority & 0xf) << 8;
+ omap_writel(l, reg);
+ }
+
+ if (cpu_class_is_omap2()) {
+ u32 ccr;
+
+ ccr = p->dma_read(CCR, lch);
+ if (priority)
+ ccr |= (1 << 6);
+ else
+ ccr &= ~(1 << 6);
+ p->dma_write(ccr, CCR, lch);
+ }
+}
+EXPORT_SYMBOL(omap_set_dma_priority);
+
+void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
+ int frame_count, int sync_mode,
+ int dma_trigger, int src_or_dst_synch)
+{
+ u32 l;
+
+ l = p->dma_read(CSDP, lch);
+ l &= ~0x03;
+ l |= data_type;
+ p->dma_write(l, CSDP, lch);
+
+ if (cpu_class_is_omap1()) {
+ u16 ccr;
+
+ ccr = p->dma_read(CCR, lch);
+ ccr &= ~(1 << 5);
+ if (sync_mode == OMAP_DMA_SYNC_FRAME)
+ ccr |= 1 << 5;
+ p->dma_write(ccr, CCR, lch);
+
+ ccr = p->dma_read(CCR2, lch);
+ ccr &= ~(1 << 2);
+ if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+ ccr |= 1 << 2;
+ p->dma_write(ccr, CCR2, lch);
+ }
+
+ if (cpu_class_is_omap2() && dma_trigger) {
+ u32 val;
+
+ val = p->dma_read(CCR, lch);
+
+ /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
+ val &= ~((1 << 23) | (3 << 19) | 0x1f);
+ val |= (dma_trigger & ~0x1f) << 14;
+ val |= dma_trigger & 0x1f;
+
+ if (sync_mode & OMAP_DMA_SYNC_FRAME)
+ val |= 1 << 5;
+ else
+ val &= ~(1 << 5);
+
+ if (sync_mode & OMAP_DMA_SYNC_BLOCK)
+ val |= 1 << 18;
+ else
+ val &= ~(1 << 18);
+
+ if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
+ val &= ~(1 << 24); /* dest synch */
+ val |= (1 << 23); /* Prefetch */
+ } else if (src_or_dst_synch) {
+ val |= 1 << 24; /* source synch */
+ } else {
+ val &= ~(1 << 24); /* dest synch */
+ }
+ p->dma_write(val, CCR, lch);
+ }
+
+ p->dma_write(elem_count, CEN, lch);
+ p->dma_write(frame_count, CFN, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_transfer_params);
+
+void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
+{
+ BUG_ON(omap_dma_in_1510_mode());
+
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ w = p->dma_read(CCR2, lch);
+ w &= ~0x03;
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ w |= 0x01;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ w |= 0x02;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ p->dma_write(w, CCR2, lch);
+
+ w = p->dma_read(LCH_CTRL, lch);
+ w &= ~0x0f;
+ /* Default is channel type 2D */
+ if (mode) {
+ p->dma_write(color, COLOR, lch);
+ w |= 1; /* Channel type G */
+ }
+ p->dma_write(w, LCH_CTRL, lch);
+ }
+
+ if (cpu_class_is_omap2()) {
+ u32 val;
+
+ val = p->dma_read(CCR, lch);
+ val &= ~((1 << 17) | (1 << 16));
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ val |= 1 << 16;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ val |= 1 << 17;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ p->dma_write(val, CCR, lch);
+
+ color &= 0xffffff;
+ p->dma_write(color, COLOR, lch);
+ }
+}
+EXPORT_SYMBOL(omap_set_dma_color_mode);
+
+void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
+{
+ if (cpu_class_is_omap2()) {
+ u32 csdp;
+
+ csdp = p->dma_read(CSDP, lch);
+ csdp &= ~(0x3 << 16);
+ csdp |= (mode << 16);
+ p->dma_write(csdp, CSDP, lch);
+ }
+}
+EXPORT_SYMBOL(omap_set_dma_write_mode);
+
+void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
+{
+ if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+ u32 l;
+
+ l = p->dma_read(LCH_CTRL, lch);
+ l &= ~0x7;
+ l |= mode;
+ p->dma_write(l, LCH_CTRL, lch);
+ }
+}
+EXPORT_SYMBOL(omap_set_dma_channel_mode);
+
+/* Note that src_port is only for omap1 */
+void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+ unsigned long src_start,
+ int src_ei, int src_fi)
+{
+ u32 l;
+
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ w = p->dma_read(CSDP, lch);
+ w &= ~(0x1f << 2);
+ w |= src_port << 2;
+ p->dma_write(w, CSDP, lch);
+ }
+
+ l = p->dma_read(CCR, lch);
+ l &= ~(0x03 << 12);
+ l |= src_amode << 12;
+ p->dma_write(l, CCR, lch);
+
+ p->dma_write(src_start, CSSA, lch);
+
+ p->dma_write(src_ei, CSEI, lch);
+ p->dma_write(src_fi, CSFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_params);
+
+void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
+{
+ omap_set_dma_transfer_params(lch, params->data_type,
+ params->elem_count, params->frame_count,
+ params->sync_mode, params->trigger,
+ params->src_or_dst_synch);
+ omap_set_dma_src_params(lch, params->src_port,
+ params->src_amode, params->src_start,
+ params->src_ei, params->src_fi);
+
+ omap_set_dma_dest_params(lch, params->dst_port,
+ params->dst_amode, params->dst_start,
+ params->dst_ei, params->dst_fi);
+ if (params->read_prio || params->write_prio)
+ omap_dma_set_prio_lch(lch, params->read_prio,
+ params->write_prio);
+}
+EXPORT_SYMBOL(omap_set_dma_params);
+
+void omap_set_dma_src_index(int lch, int eidx, int fidx)
+{
+ if (cpu_class_is_omap2())
+ return;
+
+ p->dma_write(eidx, CSEI, lch);
+ p->dma_write(fidx, CSFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_index);
+
+void omap_set_dma_src_data_pack(int lch, int enable)
+{
+ u32 l;
+
+ l = p->dma_read(CSDP, lch);
+ l &= ~(1 << 6);
+ if (enable)
+ l |= (1 << 6);
+ p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_data_pack);
+
+void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+{
+ unsigned int burst = 0;
+ u32 l;
+
+ l = p->dma_read(CSDP, lch);
+ l &= ~(0x03 << 7);
+
+ switch (burst_mode) {
+ case OMAP_DMA_DATA_BURST_DIS:
+ break;
+ case OMAP_DMA_DATA_BURST_4:
+ if (cpu_class_is_omap2())
+ burst = 0x1;
+ else
+ burst = 0x2;
+ break;
+ case OMAP_DMA_DATA_BURST_8:
+ if (cpu_class_is_omap2()) {
+ burst = 0x2;
+ break;
+ }
+ /*
+ * not supported by current hardware on OMAP1
+ * w |= (0x03 << 7);
+ * fall through
+ */
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_class_is_omap2()) {
+ burst = 0x3;
+ break;
+ }
+ /*
+ * OMAP1 don't support burst 16
+ * fall through
+ */
+ default:
+ BUG();
+ }
+
+ l |= (burst << 7);
+ p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
+
+/* Note that dest_port is only for OMAP1 */
+void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+ unsigned long dest_start,
+ int dst_ei, int dst_fi)
+{
+ u32 l;
+
+ if (cpu_class_is_omap1()) {
+ l = p->dma_read(CSDP, lch);
+ l &= ~(0x1f << 9);
+ l |= dest_port << 9;
+ p->dma_write(l, CSDP, lch);
+ }
+
+ l = p->dma_read(CCR, lch);
+ l &= ~(0x03 << 14);
+ l |= dest_amode << 14;
+ p->dma_write(l, CCR, lch);
+
+ p->dma_write(dest_start, CDSA, lch);
+
+ p->dma_write(dst_ei, CDEI, lch);
+ p->dma_write(dst_fi, CDFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_params);
+
+void omap_set_dma_dest_index(int lch, int eidx, int fidx)
+{
+ if (cpu_class_is_omap2())
+ return;
+
+ p->dma_write(eidx, CDEI, lch);
+ p->dma_write(fidx, CDFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_index);
+
+void omap_set_dma_dest_data_pack(int lch, int enable)
+{
+ u32 l;
+
+ l = p->dma_read(CSDP, lch);
+ l &= ~(1 << 13);
+ if (enable)
+ l |= 1 << 13;
+ p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
+
+void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+{
+ unsigned int burst = 0;
+ u32 l;
+
+ l = p->dma_read(CSDP, lch);
+ l &= ~(0x03 << 14);
+
+ switch (burst_mode) {
+ case OMAP_DMA_DATA_BURST_DIS:
+ break;
+ case OMAP_DMA_DATA_BURST_4:
+ if (cpu_class_is_omap2())
+ burst = 0x1;
+ else
+ burst = 0x2;
+ break;
+ case OMAP_DMA_DATA_BURST_8:
+ if (cpu_class_is_omap2())
+ burst = 0x2;
+ else
+ burst = 0x3;
+ break;
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_class_is_omap2()) {
+ burst = 0x3;
+ break;
+ }
+ /*
+ * OMAP1 don't support burst 16
+ * fall through
+ */
+ default:
+ printk(KERN_ERR "Invalid DMA burst mode\n");
+ BUG();
+ return;
+ }
+ l |= (burst << 14);
+ p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
+
+static inline void omap_enable_channel_irq(int lch)
+{
+ u32 status;
+
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ status = p->dma_read(CSR, lch);
+ else if (cpu_class_is_omap2())
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+
+ /* Enable some nice interrupts. */
+ p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
+}
+
+static void omap_disable_channel_irq(int lch)
+{
+ if (cpu_class_is_omap2())
+ p->dma_write(0, CICR, lch);
+}
+
+void omap_enable_dma_irq(int lch, u16 bits)
+{
+ dma_chan[lch].enabled_irqs |= bits;
+}
+EXPORT_SYMBOL(omap_enable_dma_irq);
+
+void omap_disable_dma_irq(int lch, u16 bits)
+{
+ dma_chan[lch].enabled_irqs &= ~bits;
+}
+EXPORT_SYMBOL(omap_disable_dma_irq);
+
+static inline void enable_lnk(int lch)
+{
+ u32 l;
+
+ l = p->dma_read(CLNK_CTRL, lch);
+
+ if (cpu_class_is_omap1())
+ l &= ~(1 << 14);
+
+ /* Set the ENABLE_LNK bits */
+ if (dma_chan[lch].next_lch != -1)
+ l = dma_chan[lch].next_lch | (1 << 15);
+
+#ifndef CONFIG_ARCH_OMAP1
+ if (cpu_class_is_omap2())
+ if (dma_chan[lch].next_linked_ch != -1)
+ l = dma_chan[lch].next_linked_ch | (1 << 15);
+#endif
+
+ p->dma_write(l, CLNK_CTRL, lch);
+}
+
+static inline void disable_lnk(int lch)
+{
+ u32 l;
+
+ l = p->dma_read(CLNK_CTRL, lch);
+
+ /* Disable interrupts */
+ if (cpu_class_is_omap1()) {
+ p->dma_write(0, CICR, lch);
+ /* Set the STOP_LNK bit */
+ l |= 1 << 14;
+ }
+
+ if (cpu_class_is_omap2()) {
+ omap_disable_channel_irq(lch);
+ /* Clear the ENABLE_LNK bit */
+ l &= ~(1 << 15);
+ }
+
+ p->dma_write(l, CLNK_CTRL, lch);
+ dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
+}
+
+static inline void omap2_enable_irq_lch(int lch)
+{
+ u32 val;
+ unsigned long flags;
+
+ if (!cpu_class_is_omap2())
+ return;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ val = p->dma_read(IRQENABLE_L0, lch);
+ val |= 1 << lch;
+ p->dma_write(val, IRQENABLE_L0, lch);
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+
+static inline void omap2_disable_irq_lch(int lch)
+{
+ u32 val;
+ unsigned long flags;
+
+ if (!cpu_class_is_omap2())
+ return;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ val = p->dma_read(IRQENABLE_L0, lch);
+ val &= ~(1 << lch);
+ p->dma_write(val, IRQENABLE_L0, lch);
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+
+int omap_request_dma(int dev_id, const char *dev_name,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data, int *dma_ch_out)
+{
+ int ch, free_ch = -1;
+ unsigned long flags;
+ struct omap_dma_lch *chan;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ for (ch = 0; ch < dma_chan_count; ch++) {
+ if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
+ free_ch = ch;
+ if (dev_id == 0)
+ break;
+ }
+ }
+ if (free_ch == -1) {
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return -EBUSY;
+ }
+ chan = dma_chan + free_ch;
+ chan->dev_id = dev_id;
+
+ if (p->clear_lch_regs)
+ p->clear_lch_regs(free_ch);
+
+ if (cpu_class_is_omap2())
+ omap_clear_dma(free_ch);
+
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ chan->dev_name = dev_name;
+ chan->callback = callback;
+ chan->data = data;
+ chan->flags = 0;
+
+#ifndef CONFIG_ARCH_OMAP1
+ if (cpu_class_is_omap2()) {
+ chan->chain_id = -1;
+ chan->next_linked_ch = -1;
+ }
+#endif
+
+ chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
+
+ if (cpu_class_is_omap1())
+ chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+ else if (cpu_class_is_omap2())
+ chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+ OMAP2_DMA_TRANS_ERR_IRQ;
+
+ if (cpu_is_omap16xx()) {
+ /* If the sync device is set, configure it dynamically. */
+ if (dev_id != 0) {
+ set_gdma_dev(free_ch + 1, dev_id);
+ dev_id = free_ch + 1;
+ }
+ /*
+ * Disable the 1510 compatibility mode and set the sync device
+ * id.
+ */
+ p->dma_write(dev_id | (1 << 10), CCR, free_ch);
+ } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
+ p->dma_write(dev_id, CCR, free_ch);
+ }
+
+ if (cpu_class_is_omap2()) {
+ omap2_enable_irq_lch(free_ch);
+ omap_enable_channel_irq(free_ch);
+ /* Clear the CSR register and IRQ status register */
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
+ p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
+ }
+
+ *dma_ch_out = free_ch;
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_request_dma);
+
+void omap_free_dma(int lch)
+{
+ unsigned long flags;
+
+ if (dma_chan[lch].dev_id == -1) {
+ pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
+ lch);
+ return;
+ }
+
+ if (cpu_class_is_omap1()) {
+ /* Disable all DMA interrupts for the channel. */
+ p->dma_write(0, CICR, lch);
+ /* Make sure the DMA transfer is stopped. */
+ p->dma_write(0, CCR, lch);
+ }
+
+ if (cpu_class_is_omap2()) {
+ omap2_disable_irq_lch(lch);
+
+ /* Clear the CSR register and IRQ status register */
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+ p->dma_write(1 << lch, IRQSTATUS_L0, lch);
+
+ /* Disable all DMA interrupts for the channel. */
+ p->dma_write(0, CICR, lch);
+
+ /* Make sure the DMA transfer is stopped. */
+ p->dma_write(0, CCR, lch);
+ omap_clear_dma(lch);
+ }
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+EXPORT_SYMBOL(omap_free_dma);
+
+/**
+ * @brief omap_dma_set_global_params : Set global priority settings for dma
+ *
+ * @param arb_rate
+ * @param max_fifo_depth
+ * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
+ * DMA_THREAD_RESERVE_ONET
+ * DMA_THREAD_RESERVE_TWOT
+ * DMA_THREAD_RESERVE_THREET
+ */
+void
+omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
+{
+ u32 reg;
+
+ if (!cpu_class_is_omap2()) {
+ printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
+ return;
+ }
+
+ if (max_fifo_depth == 0)
+ max_fifo_depth = 1;
+ if (arb_rate == 0)
+ arb_rate = 1;
+
+ reg = 0xff & max_fifo_depth;
+ reg |= (0x3 & tparams) << 12;
+ reg |= (arb_rate & 0xff) << 16;
+
+ p->dma_write(reg, GCR, 0);
+}
+EXPORT_SYMBOL(omap_dma_set_global_params);
+
+/**
+ * @brief omap_dma_set_prio_lch : Set channel wise priority settings
+ *
+ * @param lch
+ * @param read_prio - Read priority
+ * @param write_prio - Write priority
+ * Both of the above can be set with one of the following values :
+ * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
+ */
+int
+omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+ unsigned char write_prio)
+{
+ u32 l;
+
+ if (unlikely((lch < 0 || lch >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid channel id\n");
+ return -EINVAL;
+ }
+ l = p->dma_read(CCR, lch);
+ l &= ~((1 << 6) | (1 << 26));
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
+ l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
+ else
+ l |= ((read_prio & 0x1) << 6);
+
+ p->dma_write(l, CCR, lch);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_dma_set_prio_lch);
+
+/*
+ * Clears any DMA state so the DMA engine is ready to restart with new buffers
+ * through omap_start_dma(). Any buffers in flight are discarded.
+ */
+void omap_clear_dma(int lch)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ p->clear_dma(lch);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(omap_clear_dma);
+
+void omap_start_dma(int lch)
+{
+ u32 l;
+
+ /*
+ * The CPC/CDAC register needs to be initialized to zero
+ * before starting dma transfer.
+ */
+ if (cpu_is_omap15xx())
+ p->dma_write(0, CPC, lch);
+ else
+ p->dma_write(0, CDAC, lch);
+
+ if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+ int next_lch, cur_lch;
+ char dma_chan_link_map[dma_lch_count];
+
+ dma_chan_link_map[lch] = 1;
+ /* Set the link register of the first channel */
+ enable_lnk(lch);
+
+ memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+ cur_lch = dma_chan[lch].next_lch;
+ do {
+ next_lch = dma_chan[cur_lch].next_lch;
+
+ /* The loop case: we've been here already */
+ if (dma_chan_link_map[cur_lch])
+ break;
+ /* Mark the current channel */
+ dma_chan_link_map[cur_lch] = 1;
+
+ enable_lnk(cur_lch);
+ omap_enable_channel_irq(cur_lch);
+
+ cur_lch = next_lch;
+ } while (next_lch != -1);
+ } else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
+ p->dma_write(lch, CLNK_CTRL, lch);
+
+ omap_enable_channel_irq(lch);
+
+ l = p->dma_read(CCR, lch);
+
+ if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
+ l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
+ l |= OMAP_DMA_CCR_EN;
+
+ /*
+ * As dma_write() uses IO accessors which are weakly ordered, there
+ * is no guarantee that data in coherent DMA memory will be visible
+ * to the DMA device. Add a memory barrier here to ensure that any
+ * such data is visible prior to enabling DMA.
+ */
+ mb();
+ p->dma_write(l, CCR, lch);
+
+ dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_start_dma);
+
+void omap_stop_dma(int lch)
+{
+ u32 l;
+
+ /* Disable all interrupts on the channel */
+ if (cpu_class_is_omap1())
+ p->dma_write(0, CICR, lch);
+
+ l = p->dma_read(CCR, lch);
+ if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
+ (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
+ int i = 0;
+ u32 sys_cf;
+
+ /* Configure No-Standby */
+ l = p->dma_read(OCP_SYSCONFIG, lch);
+ sys_cf = l;
+ l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
+ l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
+ p->dma_write(l , OCP_SYSCONFIG, 0);
+
+ l = p->dma_read(CCR, lch);
+ l &= ~OMAP_DMA_CCR_EN;
+ p->dma_write(l, CCR, lch);
+
+ /* Wait for sDMA FIFO drain */
+ l = p->dma_read(CCR, lch);
+ while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
+ OMAP_DMA_CCR_WR_ACTIVE))) {
+ udelay(5);
+ i++;
+ l = p->dma_read(CCR, lch);
+ }
+ if (i >= 100)
+ printk(KERN_ERR "DMA drain did not complete on "
+ "lch %d\n", lch);
+ /* Restore OCP_SYSCONFIG */
+ p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
+ } else {
+ l &= ~OMAP_DMA_CCR_EN;
+ p->dma_write(l, CCR, lch);
+ }
+
+ /*
+ * Ensure that data transferred by DMA is visible to any access
+ * after DMA has been disabled. This is important for coherent
+ * DMA regions.
+ */
+ mb();
+
+ if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+ int next_lch, cur_lch = lch;
+ char dma_chan_link_map[dma_lch_count];
+
+ memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+ do {
+ /* The loop case: we've been here already */
+ if (dma_chan_link_map[cur_lch])
+ break;
+ /* Mark the current channel */
+ dma_chan_link_map[cur_lch] = 1;
+
+ disable_lnk(cur_lch);
+
+ next_lch = dma_chan[cur_lch].next_lch;
+ cur_lch = next_lch;
+ } while (next_lch != -1);
+ }
+
+ dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_stop_dma);
+
+/*
+ * Allows changing the DMA callback function or data. This may be needed if
+ * the driver shares a single DMA channel for multiple dma triggers.
+ */
+int omap_set_dma_callback(int lch,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data)
+{
+ unsigned long flags;
+
+ if (lch < 0)
+ return -ENODEV;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ if (dma_chan[lch].dev_id == -1) {
+ printk(KERN_ERR "DMA callback for not set for free channel\n");
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return -EINVAL;
+ }
+ dma_chan[lch].callback = callback;
+ dma_chan[lch].data = data;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_set_dma_callback);
+
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CSSA_L register overflow between the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_src_pos(int lch)
+{
+ dma_addr_t offset = 0;
+
+ if (cpu_is_omap15xx())
+ offset = p->dma_read(CPC, lch);
+ else
+ offset = p->dma_read(CSAC, lch);
+
+ if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
+ offset = p->dma_read(CSAC, lch);
+
+ if (!cpu_is_omap15xx()) {
+ /*
+ * CDAC == 0 indicates that the DMA transfer on the channel has
+ * not been started (no data has been transferred so far).
+ * Return the programmed source start address in this case.
+ */
+ if (likely(p->dma_read(CDAC, lch)))
+ offset = p->dma_read(CSAC, lch);
+ else
+ offset = p->dma_read(CSSA, lch);
+ }
+
+ if (cpu_class_is_omap1())
+ offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
+
+ return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_src_pos);
+
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CDSA_L register overflow between the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_dst_pos(int lch)
+{
+ dma_addr_t offset = 0;
+
+ if (cpu_is_omap15xx())
+ offset = p->dma_read(CPC, lch);
+ else
+ offset = p->dma_read(CDAC, lch);
+
+ /*
+ * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+ * read before the DMA controller finished disabling the channel.
+ */
+ if (!cpu_is_omap15xx() && offset == 0) {
+ offset = p->dma_read(CDAC, lch);
+ /*
+ * CDAC == 0 indicates that the DMA transfer on the channel has
+ * not been started (no data has been transferred so far).
+ * Return the programmed destination start address in this case.
+ */
+ if (unlikely(!offset))
+ offset = p->dma_read(CDSA, lch);
+ }
+
+ if (cpu_class_is_omap1())
+ offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
+
+ return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_dst_pos);
+
+int omap_get_dma_active_status(int lch)
+{
+ return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
+}
+EXPORT_SYMBOL(omap_get_dma_active_status);
+
+int omap_dma_running(void)
+{
+ int lch;
+
+ if (cpu_class_is_omap1())
+ if (omap_lcd_dma_running())
+ return 1;
+
+ for (lch = 0; lch < dma_chan_count; lch++)
+ if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * lch_queue DMA will start right after lch_head one is finished.
+ * For this DMA link to start, you still need to start (see omap_start_dma)
+ * the first one. That will fire up the entire queue.
+ */
+void omap_dma_link_lch(int lch_head, int lch_queue)
+{
+ if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
+ CCR, lch_head);
+ return;
+ }
+ printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
+ BUG();
+ return;
+ }
+
+ if ((dma_chan[lch_head].dev_id == -1) ||
+ (dma_chan[lch_queue].dev_id == -1)) {
+ printk(KERN_ERR "omap_dma: trying to link "
+ "non requested channels\n");
+ dump_stack();
+ }
+
+ dma_chan[lch_head].next_lch = lch_queue;
+}
+EXPORT_SYMBOL(omap_dma_link_lch);
+
+/*
+ * Once the DMA queue is stopped, we can destroy it.
+ */
+void omap_dma_unlink_lch(int lch_head, int lch_queue)
+{
+ if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8),
+ CCR, lch_head);
+ return;
+ }
+ printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
+ BUG();
+ return;
+ }
+
+ if (dma_chan[lch_head].next_lch != lch_queue ||
+ dma_chan[lch_head].next_lch == -1) {
+ printk(KERN_ERR "omap_dma: trying to unlink "
+ "non linked channels\n");
+ dump_stack();
+ }
+
+ if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
+ (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
+ printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
+ "before unlinking\n");
+ dump_stack();
+ }
+
+ dma_chan[lch_head].next_lch = -1;
+}
+EXPORT_SYMBOL(omap_dma_unlink_lch);
+
+#ifndef CONFIG_ARCH_OMAP1
+/* Create chain of DMA channesls */
+static void create_dma_lch_chain(int lch_head, int lch_queue)
+{
+ u32 l;
+
+ /* Check if this is the first link in chain */
+ if (dma_chan[lch_head].next_linked_ch == -1) {
+ dma_chan[lch_head].next_linked_ch = lch_queue;
+ dma_chan[lch_head].prev_linked_ch = lch_queue;
+ dma_chan[lch_queue].next_linked_ch = lch_head;
+ dma_chan[lch_queue].prev_linked_ch = lch_head;
+ }
+
+ /* a link exists, link the new channel in circular chain */
+ else {
+ dma_chan[lch_queue].next_linked_ch =
+ dma_chan[lch_head].next_linked_ch;
+ dma_chan[lch_queue].prev_linked_ch = lch_head;
+ dma_chan[lch_head].next_linked_ch = lch_queue;
+ dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
+ lch_queue;
+ }
+
+ l = p->dma_read(CLNK_CTRL, lch_head);
+ l &= ~(0x1f);
+ l |= lch_queue;
+ p->dma_write(l, CLNK_CTRL, lch_head);
+
+ l = p->dma_read(CLNK_CTRL, lch_queue);
+ l &= ~(0x1f);
+ l |= (dma_chan[lch_queue].next_linked_ch);
+ p->dma_write(l, CLNK_CTRL, lch_queue);
+}
+
+/**
+ * @brief omap_request_dma_chain : Request a chain of DMA channels
+ *
+ * @param dev_id - Device id using the dma channel
+ * @param dev_name - Device name
+ * @param callback - Call back function
+ * @chain_id -
+ * @no_of_chans - Number of channels requested
+ * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
+ * OMAP_DMA_DYNAMIC_CHAIN
+ * @params - Channel parameters
+ *
+ * @return - Success : 0
+ * Failure: -EINVAL/-ENOMEM
+ */
+int omap_request_dma_chain(int dev_id, const char *dev_name,
+ void (*callback) (int lch, u16 ch_status,
+ void *data),
+ int *chain_id, int no_of_chans, int chain_mode,
+ struct omap_dma_channel_params params)
+{
+ int *channels;
+ int i, err;
+
+ /* Is the chain mode valid ? */
+ if (chain_mode != OMAP_DMA_STATIC_CHAIN
+ && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
+ printk(KERN_ERR "Invalid chain mode requested\n");
+ return -EINVAL;
+ }
+
+ if (unlikely((no_of_chans < 1
+ || no_of_chans > dma_lch_count))) {
+ printk(KERN_ERR "Invalid Number of channels requested\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Allocate a queue to maintain the status of the channels
+ * in the chain
+ */
+ channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
+ if (channels == NULL) {
+ printk(KERN_ERR "omap_dma: No memory for channel queue\n");
+ return -ENOMEM;
+ }
+
+ /* request and reserve DMA channels for the chain */
+ for (i = 0; i < no_of_chans; i++) {
+ err = omap_request_dma(dev_id, dev_name,
+ callback, NULL, &channels[i]);
+ if (err < 0) {
+ int j;
+ for (j = 0; j < i; j++)
+ omap_free_dma(channels[j]);
+ kfree(channels);
+ printk(KERN_ERR "omap_dma: Request failed %d\n", err);
+ return err;
+ }
+ dma_chan[channels[i]].prev_linked_ch = -1;
+ dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
+
+ /*
+ * Allowing client drivers to set common parameters now,
+ * so that later only relevant (src_start, dest_start
+ * and element count) can be set
+ */
+ omap_set_dma_params(channels[i], ¶ms);
+ }
+
+ *chain_id = channels[0];
+ dma_linked_lch[*chain_id].linked_dmach_q = channels;
+ dma_linked_lch[*chain_id].chain_mode = chain_mode;
+ dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
+ dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
+
+ for (i = 0; i < no_of_chans; i++)
+ dma_chan[channels[i]].chain_id = *chain_id;
+
+ /* Reset the Queue pointers */
+ OMAP_DMA_CHAIN_QINIT(*chain_id);
+
+ /* Set up the chain */
+ if (no_of_chans == 1)
+ create_dma_lch_chain(channels[0], channels[0]);
+ else {
+ for (i = 0; i < (no_of_chans - 1); i++)
+ create_dma_lch_chain(channels[i], channels[i + 1]);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_request_dma_chain);
+
+/**
+ * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
+ * params after setting it. Dont do this while dma is running!!
+ *
+ * @param chain_id - Chained logical channel id.
+ * @param params
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL
+ */
+int omap_modify_dma_chain_params(int chain_id,
+ struct omap_dma_channel_params params)
+{
+ int *channels;
+ u32 i;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0
+ || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
+ /*
+ * Allowing client drivers to set common parameters now,
+ * so that later only relevant (src_start, dest_start
+ * and element count) can be set
+ */
+ omap_set_dma_params(channels[i], ¶ms);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_modify_dma_chain_params);
+
+/**
+ * @brief omap_free_dma_chain - Free all the logical channels in a chain.
+ *
+ * @param chain_id
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL
+ */
+int omap_free_dma_chain(int chain_id)
+{
+ int *channels;
+ u32 i;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
+ dma_chan[channels[i]].next_linked_ch = -1;
+ dma_chan[channels[i]].prev_linked_ch = -1;
+ dma_chan[channels[i]].chain_id = -1;
+ dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
+ omap_free_dma(channels[i]);
+ }
+
+ kfree(channels);
+
+ dma_linked_lch[chain_id].linked_dmach_q = NULL;
+ dma_linked_lch[chain_id].chain_mode = -1;
+ dma_linked_lch[chain_id].chain_state = -1;
+
+ return (0);
+}
+EXPORT_SYMBOL(omap_free_dma_chain);
+
+/**
+ * @brief omap_dma_chain_status - Check if the chain is in
+ * active / inactive state.
+ * @param chain_id
+ *
+ * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
+ * Failure : -EINVAL
+ */
+int omap_dma_chain_status(int chain_id)
+{
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
+ dma_linked_lch[chain_id].q_count);
+
+ if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
+ return OMAP_DMA_CHAIN_INACTIVE;
+
+ return OMAP_DMA_CHAIN_ACTIVE;
+}
+EXPORT_SYMBOL(omap_dma_chain_status);
+
+/**
+ * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
+ * set the params and start the transfer.
+ *
+ * @param chain_id
+ * @param src_start - buffer start address
+ * @param dest_start - Dest address
+ * @param elem_count
+ * @param frame_count
+ * @param callbk_data - channel callback parameter data.
+ *
+ * @return - Success : 0
+ * Failure: -EINVAL/-EBUSY
+ */
+int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
+ int elem_count, int frame_count, void *callbk_data)
+{
+ int *channels;
+ u32 l, lch;
+ int start_dma = 0;
+
+ /*
+ * if buffer size is less than 1 then there is
+ * no use of starting the chain
+ */
+ if (elem_count < 1) {
+ printk(KERN_ERR "Invalid buffer size\n");
+ return -EINVAL;
+ }
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0
+ || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exist\n");
+ return -EINVAL;
+ }
+
+ /* Check if all the channels in chain are in use */
+ if (OMAP_DMA_CHAIN_QFULL(chain_id))
+ return -EBUSY;
+
+ /* Frame count may be negative in case of indexed transfers */
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /* Get a free channel */
+ lch = channels[dma_linked_lch[chain_id].q_tail];
+
+ /* Store the callback data */
+ dma_chan[lch].data = callbk_data;
+
+ /* Increment the q_tail */
+ OMAP_DMA_CHAIN_INCQTAIL(chain_id);
+
+ /* Set the params to the free channel */
+ if (src_start != 0)
+ p->dma_write(src_start, CSSA, lch);
+ if (dest_start != 0)
+ p->dma_write(dest_start, CDSA, lch);
+
+ /* Write the buffer size */
+ p->dma_write(elem_count, CEN, lch);
+ p->dma_write(frame_count, CFN, lch);
+
+ /*
+ * If the chain is dynamically linked,
+ * then we may have to start the chain if its not active
+ */
+ if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
+
+ /*
+ * In Dynamic chain, if the chain is not started,
+ * queue the channel
+ */
+ if (dma_linked_lch[chain_id].chain_state ==
+ DMA_CHAIN_NOTSTARTED) {
+ /* Enable the link in previous channel */
+ if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
+ DMA_CH_QUEUED)
+ enable_lnk(dma_chan[lch].prev_linked_ch);
+ dma_chan[lch].state = DMA_CH_QUEUED;
+ }
+
+ /*
+ * Chain is already started, make sure its active,
+ * if not then start the chain
+ */
+ else {
+ start_dma = 1;
+
+ if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
+ DMA_CH_STARTED) {
+ enable_lnk(dma_chan[lch].prev_linked_ch);
+ dma_chan[lch].state = DMA_CH_QUEUED;
+ start_dma = 0;
+ if (0 == ((1 << 7) & p->dma_read(
+ CCR, dma_chan[lch].prev_linked_ch))) {
+ disable_lnk(dma_chan[lch].
+ prev_linked_ch);
+ pr_debug("\n prev ch is stopped\n");
+ start_dma = 1;
+ }
+ }
+
+ else if (dma_chan[dma_chan[lch].prev_linked_ch].state
+ == DMA_CH_QUEUED) {
+ enable_lnk(dma_chan[lch].prev_linked_ch);
+ dma_chan[lch].state = DMA_CH_QUEUED;
+ start_dma = 0;
+ }
+ omap_enable_channel_irq(lch);
+
+ l = p->dma_read(CCR, lch);
+
+ if ((0 == (l & (1 << 24))))
+ l &= ~(1 << 25);
+ else
+ l |= (1 << 25);
+ if (start_dma == 1) {
+ if (0 == (l & (1 << 7))) {
+ l |= (1 << 7);
+ dma_chan[lch].state = DMA_CH_STARTED;
+ pr_debug("starting %d\n", lch);
+ p->dma_write(l, CCR, lch);
+ } else
+ start_dma = 0;
+ } else {
+ if (0 == (l & (1 << 7)))
+ p->dma_write(l, CCR, lch);
+ }
+ dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_dma_chain_a_transfer);
+
+/**
+ * @brief omap_start_dma_chain_transfers - Start the chain
+ *
+ * @param chain_id
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL/-EBUSY
+ */
+int omap_start_dma_chain_transfers(int chain_id)
+{
+ int *channels;
+ u32 l, i;
+
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
+ printk(KERN_ERR "Chain is already started\n");
+ return -EBUSY;
+ }
+
+ if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
+ i++) {
+ enable_lnk(channels[i]);
+ omap_enable_channel_irq(channels[i]);
+ }
+ } else {
+ omap_enable_channel_irq(channels[0]);
+ }
+
+ l = p->dma_read(CCR, channels[0]);
+ l |= (1 << 7);
+ dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
+ dma_chan[channels[0]].state = DMA_CH_STARTED;
+
+ if ((0 == (l & (1 << 24))))
+ l &= ~(1 << 25);
+ else
+ l |= (1 << 25);
+ p->dma_write(l, CCR, channels[0]);
+
+ dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_start_dma_chain_transfers);
+
+/**
+ * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
+ *
+ * @param chain_id
+ *
+ * @return - Success : 0
+ * Failure : EINVAL
+ */
+int omap_stop_dma_chain_transfers(int chain_id)
+{
+ int *channels;
+ u32 l, i;
+ u32 sys_cf = 0;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ if (IS_DMA_ERRATA(DMA_ERRATA_i88)) {
+ sys_cf = p->dma_read(OCP_SYSCONFIG, 0);
+ l = sys_cf;
+ /* Middle mode reg set no Standby */
+ l &= ~((1 << 12)|(1 << 13));
+ p->dma_write(l, OCP_SYSCONFIG, 0);
+ }
+
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
+
+ /* Stop the Channel transmission */
+ l = p->dma_read(CCR, channels[i]);
+ l &= ~(1 << 7);
+ p->dma_write(l, CCR, channels[i]);
+
+ /* Disable the link in all the channels */
+ disable_lnk(channels[i]);
+ dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
+
+ }
+ dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
+
+ /* Reset the Queue pointers */
+ OMAP_DMA_CHAIN_QINIT(chain_id);
+
+ if (IS_DMA_ERRATA(DMA_ERRATA_i88))
+ p->dma_write(sys_cf, OCP_SYSCONFIG, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
+
+/* Get the index of the ongoing DMA in chain */
+/**
+ * @brief omap_get_dma_chain_index - Get the element and frame index
+ * of the ongoing DMA in chain
+ *
+ * @param chain_id
+ * @param ei - Element index
+ * @param fi - Frame index
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL
+ */
+int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
+{
+ int lch;
+ int *channels;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ if ((!ei) || (!fi))
+ return -EINVAL;
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /* Get the current channel */
+ lch = channels[dma_linked_lch[chain_id].q_head];
+
+ *ei = p->dma_read(CCEN, lch);
+ *fi = p->dma_read(CCFN, lch);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_get_dma_chain_index);
+
+/**
+ * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
+ * ongoing DMA in chain
+ *
+ * @param chain_id
+ *
+ * @return - Success : Destination position
+ * Failure : -EINVAL
+ */
+int omap_get_dma_chain_dst_pos(int chain_id)
+{
+ int lch;
+ int *channels;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /* Get the current channel */
+ lch = channels[dma_linked_lch[chain_id].q_head];
+
+ return p->dma_read(CDAC, lch);
+}
+EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
+
+/**
+ * @brief omap_get_dma_chain_src_pos - Get the source position
+ * of the ongoing DMA in chain
+ * @param chain_id
+ *
+ * @return - Success : Destination position
+ * Failure : -EINVAL
+ */
+int omap_get_dma_chain_src_pos(int chain_id)
+{
+ int lch;
+ int *channels;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /* Get the current channel */
+ lch = channels[dma_linked_lch[chain_id].q_head];
+
+ return p->dma_read(CSAC, lch);
+}
+EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
+#endif /* ifndef CONFIG_ARCH_OMAP1 */
+
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static int omap1_dma_handle_ch(int ch)
+{
+ u32 csr;
+
+ if (enable_1510_mode && ch >= 6) {
+ csr = dma_chan[ch].saved_csr;
+ dma_chan[ch].saved_csr = 0;
+ } else
+ csr = p->dma_read(CSR, ch);
+ if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
+ dma_chan[ch + 6].saved_csr = csr >> 7;
+ csr &= 0x7f;
+ }
+ if ((csr & 0x3f) == 0)
+ return 0;
+ if (unlikely(dma_chan[ch].dev_id == -1)) {
+ printk(KERN_WARNING "Spurious interrupt from DMA channel "
+ "%d (CSR %04x)\n", ch, csr);
+ return 0;
+ }
+ if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
+ printk(KERN_WARNING "DMA timeout with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(csr & OMAP_DMA_DROP_IRQ))
+ printk(KERN_WARNING "DMA synchronization event drop occurred "
+ "with device %d\n", dma_chan[ch].dev_id);
+ if (likely(csr & OMAP_DMA_BLOCK_IRQ))
+ dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+ if (likely(dma_chan[ch].callback != NULL))
+ dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+
+ return 1;
+}
+
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
+{
+ int ch = ((int) dev_id) - 1;
+ int handled = 0;
+
+ for (;;) {
+ int handled_now = 0;
+
+ handled_now += omap1_dma_handle_ch(ch);
+ if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
+ handled_now += omap1_dma_handle_ch(ch + 6);
+ if (!handled_now)
+ break;
+ handled += handled_now;
+ }
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#else
+#define omap1_dma_irq_handler NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+static int omap2_dma_handle_ch(int ch)
+{
+ u32 status = p->dma_read(CSR, ch);
+
+ if (!status) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
+ ch);
+ p->dma_write(1 << ch, IRQSTATUS_L0, ch);
+ return 0;
+ }
+ if (unlikely(dma_chan[ch].dev_id == -1)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
+ "channel %d\n", status, ch);
+ return 0;
+ }
+ if (unlikely(status & OMAP_DMA_DROP_IRQ))
+ printk(KERN_INFO
+ "DMA synchronization event drop occurred with device "
+ "%d\n", dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
+ printk(KERN_INFO "DMA transaction error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
+ u32 ccr;
+
+ ccr = p->dma_read(CCR, ch);
+ ccr &= ~OMAP_DMA_CCR_EN;
+ p->dma_write(ccr, CCR, ch);
+ dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+ }
+ }
+ if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+ printk(KERN_INFO "DMA secure error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+ printk(KERN_INFO "DMA misaligned error with device %d\n",
+ dma_chan[ch].dev_id);
+
+ p->dma_write(status, CSR, ch);
+ p->dma_write(1 << ch, IRQSTATUS_L0, ch);
+ /* read back the register to flush the write */
+ p->dma_read(IRQSTATUS_L0, ch);
+
+ /* If the ch is not chained then chain_id will be -1 */
+ if (dma_chan[ch].chain_id != -1) {
+ int chain_id = dma_chan[ch].chain_id;
+ dma_chan[ch].state = DMA_CH_NOTSTARTED;
+ if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
+ dma_chan[dma_chan[ch].next_linked_ch].state =
+ DMA_CH_STARTED;
+ if (dma_linked_lch[chain_id].chain_mode ==
+ OMAP_DMA_DYNAMIC_CHAIN)
+ disable_lnk(ch);
+
+ if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
+ OMAP_DMA_CHAIN_INCQHEAD(chain_id);
+
+ status = p->dma_read(CSR, ch);
+ p->dma_write(status, CSR, ch);
+ }
+
+ if (likely(dma_chan[ch].callback != NULL))
+ dma_chan[ch].callback(ch, status, dma_chan[ch].data);
+
+ return 0;
+}
+
+/* STATUS register count is from 1-32 while our is 0-31 */
+static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
+{
+ u32 val, enable_reg;
+ int i;
+
+ val = p->dma_read(IRQSTATUS_L0, 0);
+ if (val == 0) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Spurious DMA IRQ\n");
+ return IRQ_HANDLED;
+ }
+ enable_reg = p->dma_read(IRQENABLE_L0, 0);
+ val &= enable_reg; /* Dispatch only relevant interrupts */
+ for (i = 0; i < dma_lch_count && val != 0; i++) {
+ if (val & 1)
+ omap2_dma_handle_ch(i);
+ val >>= 1;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction omap24xx_dma_irq = {
+ .name = "DMA",
+ .handler = omap2_dma_irq_handler,
+ .flags = IRQF_DISABLED
+};
+
+#else
+static struct irqaction omap24xx_dma_irq;
+#endif
+
+/*----------------------------------------------------------------------------*/
+
+void omap_dma_global_context_save(void)
+{
+ omap_dma_global_context.dma_irqenable_l0 =
+ p->dma_read(IRQENABLE_L0, 0);
+ omap_dma_global_context.dma_ocp_sysconfig =
+ p->dma_read(OCP_SYSCONFIG, 0);
+ omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
+}
+
+void omap_dma_global_context_restore(void)
+{
+ int ch;
+
+ p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
+ p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+ OCP_SYSCONFIG, 0);
+ p->dma_write(omap_dma_global_context.dma_irqenable_l0,
+ IRQENABLE_L0, 0);
+
+ if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
+ p->dma_write(0x3 , IRQSTATUS_L0, 0);
+
+ for (ch = 0; ch < dma_chan_count; ch++)
+ if (dma_chan[ch].dev_id != -1)
+ omap_clear_dma(ch);
+}
+
+static int __devinit omap_system_dma_probe(struct platform_device *pdev)
+{
+ int ch, ret = 0;
+ int dma_irq;
+ char irq_name[4];
+ int irq_rel;
+
+ p = pdev->dev.platform_data;
+ if (!p) {
+ dev_err(&pdev->dev, "%s: System DMA initialized without"
+ "platform data\n", __func__);
+ return -EINVAL;
+ }
+
+ d = p->dma_attr;
+ errata = p->errata;
+
+ if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
+ && (omap_dma_reserve_channels <= dma_lch_count))
+ d->lch_count = omap_dma_reserve_channels;
+
+ dma_lch_count = d->lch_count;
+ dma_chan_count = dma_lch_count;
+ dma_chan = d->chan;
+ enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+
+ if (cpu_class_is_omap2()) {
+ dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
+ dma_lch_count, GFP_KERNEL);
+ if (!dma_linked_lch) {
+ ret = -ENOMEM;
+ goto exit_dma_lch_fail;
+ }
+ }
+
+ spin_lock_init(&dma_chan_lock);
+ for (ch = 0; ch < dma_chan_count; ch++) {
+ omap_clear_dma(ch);
+ if (cpu_class_is_omap2())
+ omap2_disable_irq_lch(ch);
+
+ dma_chan[ch].dev_id = -1;
+ dma_chan[ch].next_lch = -1;
+
+ if (ch >= 6 && enable_1510_mode)
+ continue;
+
+ if (cpu_class_is_omap1()) {
+ /*
+ * request_irq() doesn't like dev_id (ie. ch) being
+ * zero, so we have to kludge around this.
+ */
+ sprintf(&irq_name[0], "%d", ch);
+ dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+ if (dma_irq < 0) {
+ ret = dma_irq;
+ goto exit_dma_irq_fail;
+ }
+
+ /* INT_DMA_LCD is handled in lcd_dma.c */
+ if (dma_irq == INT_DMA_LCD)
+ continue;
+
+ ret = request_irq(dma_irq,
+ omap1_dma_irq_handler, 0, "DMA",
+ (void *) (ch + 1));
+ if (ret != 0)
+ goto exit_dma_irq_fail;
+ }
+ }
+
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
+ omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
+ DMA_DEFAULT_FIFO_DEPTH, 0);
+
+ if (cpu_class_is_omap2()) {
+ strcpy(irq_name, "0");
+ dma_irq = platform_get_irq_byname(pdev, irq_name);
+ if (dma_irq < 0) {
+ dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
+ goto exit_dma_lch_fail;
+ }
+ ret = setup_irq(dma_irq, &omap24xx_dma_irq);
+ if (ret) {
+ dev_err(&pdev->dev, "set_up failed for IRQ %d"
+ "for DMA (error %d)\n", dma_irq, ret);
+ goto exit_dma_lch_fail;
+ }
+ }
+
+ /* reserve dma channels 0 and 1 in high security devices */
+ if (cpu_is_omap34xx() &&
+ (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+ printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+ "HS ROM code\n");
+ dma_chan[0].dev_id = 0;
+ dma_chan[1].dev_id = 1;
+ }
+ p->show_dma_caps();
+ return 0;
+
+exit_dma_irq_fail:
+ dev_err(&pdev->dev, "unable to request IRQ %d"
+ "for DMA (error %d)\n", dma_irq, ret);
+ for (irq_rel = 0; irq_rel < ch; irq_rel++) {
+ dma_irq = platform_get_irq(pdev, irq_rel);
+ free_irq(dma_irq, (void *)(irq_rel + 1));
+ }
+
+exit_dma_lch_fail:
+ kfree(p);
+ kfree(d);
+ kfree(dma_chan);
+ return ret;
+}
+
+static int __devexit omap_system_dma_remove(struct platform_device *pdev)
+{
+ int dma_irq;
+
+ if (cpu_class_is_omap2()) {
+ char irq_name[4];
+ strcpy(irq_name, "0");
+ dma_irq = platform_get_irq_byname(pdev, irq_name);
+ remove_irq(dma_irq, &omap24xx_dma_irq);
+ } else {
+ int irq_rel = 0;
+ for ( ; irq_rel < dma_chan_count; irq_rel++) {
+ dma_irq = platform_get_irq(pdev, irq_rel);
+ free_irq(dma_irq, (void *)(irq_rel + 1));
+ }
+ }
+ kfree(p);
+ kfree(d);
+ kfree(dma_chan);
+ return 0;
+}
+
+static struct platform_driver omap_system_dma_driver = {
+ .probe = omap_system_dma_probe,
+ .remove = __devexit_p(omap_system_dma_remove),
+ .driver = {
+ .name = "omap_dma_system"
+ },
+};
+
+static int __init omap_system_dma_init(void)
+{
+ return platform_driver_register(&omap_system_dma_driver);
+}
+arch_initcall(omap_system_dma_init);
+
+static void __exit omap_system_dma_exit(void)
+{
+ platform_driver_unregister(&omap_system_dma_driver);
+}
+
+MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
+
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+ if (get_option(&str, &omap_dma_reserve_channels) != 1)
+ omap_dma_reserve_channels = 0;
+ return 1;
+}
+
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
+
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/dmtimer.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/dmtimer.c
new file mode 100644
index 0000000..7ac301e
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/dmtimer.c
@@ -0,0 +1,765 @@
+/*
+ * linux/arch/arm/plat-omap/dmtimer.c
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * dmtimer adaptation to platform_driver.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * OMAP2 support by Juha Yrjola
+ * API improvements and OMAP2 clock framework support by Timo Teras
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
+#include <plat/dmtimer.h>
+
+#include <mach/hardware.h>
+
+static LIST_HEAD(omap_timer_list);
+static DEFINE_SPINLOCK(dm_timer_lock);
+
+/**
+ * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
+ * @timer: timer pointer over which read operation to perform
+ * @reg: lowest byte holds the register offset
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode write
+ * pending bit must be checked. Otherwise a read of a non completed write
+ * will produce an error.
+ */
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
+{
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ return __omap_dm_timer_read(timer, reg, timer->posted);
+}
+
+/**
+ * omap_dm_timer_write_reg - write timer registers in posted and non-posted mode
+ * @timer: timer pointer over which write operation is to perform
+ * @reg: lowest byte holds the register offset
+ * @value: data to write into the register
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode the write
+ * pending bit must be checked. Otherwise a write on a register which has a
+ * pending write will be lost.
+ */
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
+ u32 value)
+{
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ __omap_dm_timer_write(timer, reg, value, timer->posted);
+}
+
+static void omap_timer_restore_context(struct omap_dm_timer *timer)
+{
+ __raw_writel(timer->context.tiocp_cfg,
+ timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
+ if (timer->revision == 1)
+ __raw_writel(timer->context.tistat, timer->sys_stat);
+
+ __raw_writel(timer->context.tisr, timer->irq_stat);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
+ timer->context.twer);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
+ timer->context.tcrr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG,
+ timer->context.tldr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG,
+ timer->context.tmar);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+ timer->context.tsicr);
+ __raw_writel(timer->context.tier, timer->irq_ena);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
+ timer->context.tclr);
+}
+
+static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
+{
+ int c;
+
+ if (!timer->sys_stat)
+ return;
+
+ c = 0;
+ while (!(__raw_readl(timer->sys_stat) & 1)) {
+ c++;
+ if (c > 100000) {
+ printk(KERN_ERR "Timer failed to reset\n");
+ return;
+ }
+ }
+}
+
+static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_enable(timer);
+ if (timer->pdev->id != 1) {
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+ omap_dm_timer_wait_for_reset(timer);
+ }
+
+ __omap_dm_timer_reset(timer, 0, 0);
+ omap_dm_timer_disable(timer);
+ timer->posted = 1;
+}
+
+int omap_dm_timer_prepare(struct omap_dm_timer *timer)
+{
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+ int ret;
+
+ timer->fclk = clk_get(&timer->pdev->dev, "fck");
+ if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+ timer->fclk = NULL;
+ dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+ return -EINVAL;
+ }
+
+ if (pdata->needs_manual_reset)
+ omap_dm_timer_reset(timer);
+
+ ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+ timer->posted = 1;
+ return ret;
+}
+
+struct omap_dm_timer *omap_dm_timer_request(void)
+{
+ struct omap_dm_timer *timer = NULL, *t;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->reserved)
+ continue;
+
+ timer = t;
+ timer->reserved = 1;
+ break;
+ }
+
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ if (!timer)
+ pr_debug("%s: timer request failed!\n", __func__);
+
+ return timer;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request);
+
+struct omap_dm_timer *omap_dm_timer_request_specific(int id)
+{
+ struct omap_dm_timer *timer = NULL, *t;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->pdev->id == id && !t->reserved) {
+ timer = t;
+ timer->reserved = 1;
+ break;
+ }
+ }
+
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ if (!timer)
+ pr_debug("%s: timer%d request failed!\n", __func__, id);
+
+ return timer;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
+
+int omap_dm_timer_free(struct omap_dm_timer *timer)
+{
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ clk_put(timer->fclk);
+
+ WARN_ON(!timer->reserved);
+ timer->reserved = 0;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_free);
+
+void omap_dm_timer_enable(struct omap_dm_timer *timer)
+{
+ pm_runtime_get_sync(&timer->pdev->dev);
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
+
+void omap_dm_timer_disable(struct omap_dm_timer *timer)
+{
+ pm_runtime_put_sync(&timer->pdev->dev);
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
+{
+ if (timer)
+ return timer->irq;
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+/**
+ * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
+ * @inputmask: current value of idlect mask
+ */
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+ int i = 0;
+ struct omap_dm_timer *timer = NULL;
+ unsigned long flags;
+
+ /* If ARMXOR cannot be idled this function call is unnecessary */
+ if (!(inputmask & (1 << 1)))
+ return inputmask;
+
+ /* If any active timer is using ARMXOR return modified mask */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node) {
+ u32 l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
+ inputmask &= ~(1 << 1);
+ else
+ inputmask &= ~(1 << 2);
+ }
+ i++;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ return inputmask;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
+
+#else
+
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+ if (timer)
+ return timer->fclk;
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
+
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+ BUG();
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
+
+#endif
+
+int omap_dm_timer_trigger(struct omap_dm_timer *timer)
+{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
+
+int omap_dm_timer_start(struct omap_dm_timer *timer)
+{
+ u32 l;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (!(l & OMAP_TIMER_CTRL_ST)) {
+ l |= OMAP_TIMER_CTRL_ST;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ }
+
+ /* Save the context */
+ timer->context.tclr = l;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_start);
+
+int omap_dm_timer_stop(struct omap_dm_timer *timer)
+{
+ unsigned long rate = 0;
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ if (!pdata->needs_manual_reset)
+ rate = clk_get_rate(timer->fclk);
+
+ __omap_dm_timer_stop(timer, timer->posted, rate);
+
+ if (timer->loses_context && timer->get_context_loss_count)
+ timer->ctx_loss_count =
+ timer->get_context_loss_count(&timer->pdev->dev);
+
+ /*
+ * Since the register values are computed and written within
+ * __omap_dm_timer_stop, we need to use read to retrieve the
+ * context.
+ */
+ timer->context.tclr =
+ omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ timer->context.tisr = __raw_readl(timer->irq_stat);
+ omap_dm_timer_disable(timer);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
+
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+{
+ int ret;
+ struct dmtimer_platform_data *pdata;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ pdata = timer->pdev->dev.platform_data;
+
+ if (source < 0 || source >= 3)
+ return -EINVAL;
+
+ ret = pdata->set_timer_src(timer->pdev, source);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
+
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+ unsigned int load)
+{
+ u32 l;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (autoreload)
+ l |= OMAP_TIMER_CTRL_AR;
+ else
+ l &= ~OMAP_TIMER_CTRL_AR;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ omap_dm_timer_disable(timer);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
+
+/* Optimized set_load which removes costly spin wait in timer_start */
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+ unsigned int load)
+{
+ u32 l;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (autoreload) {
+ l |= OMAP_TIMER_CTRL_AR;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+ } else {
+ l &= ~OMAP_TIMER_CTRL_AR;
+ }
+ l |= OMAP_TIMER_CTRL_ST;
+
+ __omap_dm_timer_load_start(timer, l, load, timer->posted);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ timer->context.tcrr = load;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
+
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+ unsigned int match)
+{
+ u32 l;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (enable)
+ l |= OMAP_TIMER_CTRL_CE;
+ else
+ l &= ~OMAP_TIMER_CTRL_CE;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tmar = match;
+ omap_dm_timer_disable(timer);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
+
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+ int toggle, int trigger)
+{
+ u32 l;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
+ OMAP_TIMER_CTRL_PT | (0x03 << 10));
+ if (def_on)
+ l |= OMAP_TIMER_CTRL_SCPWM;
+ if (toggle)
+ l |= OMAP_TIMER_CTRL_PT;
+ l |= trigger << 10;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
+
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+{
+ u32 l;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
+ if (prescaler >= 0x00 && prescaler <= 0x07) {
+ l |= OMAP_TIMER_CTRL_PRE;
+ l |= prescaler << 2;
+ }
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
+
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ __omap_dm_timer_int_enable(timer, value);
+
+ /* Save the context */
+ timer->context.tier = value;
+ timer->context.twer = value;
+ omap_dm_timer_disable(timer);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+{
+ unsigned int l;
+
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return 0;
+ }
+
+ l = __raw_readl(timer->irq_stat);
+
+ return l;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
+
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
+ return -EINVAL;
+
+ __omap_dm_timer_write_status(timer, value);
+ /* Save the context */
+ timer->context.tisr = value;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
+
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not iavailable or enabled.\n", __func__);
+ return 0;
+ }
+
+ return __omap_dm_timer_read_counter(timer, timer->posted);
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
+
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
+{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
+
+ /* Save the context */
+ timer->context.tcrr = value;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
+
+int omap_dm_timers_active(void)
+{
+ struct omap_dm_timer *timer;
+
+ list_for_each_entry(timer, &omap_timer_list, node) {
+ if (!timer->reserved)
+ continue;
+
+ if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
+ OMAP_TIMER_CTRL_ST) {
+ return 1;
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timers_active);
+
+/**
+ * omap_dm_timer_probe - probe function called for every registered device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework at the end of device registration for all
+ * timer devices.
+ */
+static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
+{
+ int ret;
+ unsigned long flags;
+ struct omap_dm_timer *timer;
+ struct resource *mem, *irq, *ioarea;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
+ return -ENODEV;
+ }
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(!irq)) {
+ dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+ return -ENODEV;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!mem)) {
+ dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+ return -ENODEV;
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
+ return -EBUSY;
+ }
+
+ timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+ if (!timer) {
+ dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_ioregion;
+ }
+
+ timer->io_base = ioremap(mem->start, resource_size(mem));
+ if (!timer->io_base) {
+ dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ timer->id = pdev->id;
+ timer->irq = irq->start;
+ timer->reserved = pdata->reserved;
+ timer->pdev = pdev;
+ timer->loses_context = pdata->loses_context;
+ timer->get_context_loss_count = pdata->get_context_loss_count;
+
+ /* Skip pm_runtime_enable for OMAP1 */
+ if (!pdata->needs_manual_reset) {
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
+ }
+
+ if (!timer->reserved) {
+ pm_runtime_get_sync(&pdev->dev);
+ __omap_dm_timer_init_regs(timer);
+ pm_runtime_put(&pdev->dev);
+ }
+
+ /* add the timer element to the list */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_add_tail(&timer->node, &omap_timer_list);
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ dev_dbg(&pdev->dev, "Device Probed.\n");
+
+ return 0;
+
+err_free_mem:
+ kfree(timer);
+
+err_free_ioregion:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return ret;
+}
+
+/**
+ * omap_dm_timer_remove - cleanup a registered timer device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework whenever a timer device is unregistered.
+ * In addition to freeing platform resources it also deletes the timer
+ * entry from the local list.
+ */
+static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
+{
+ struct omap_dm_timer *timer;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node)
+ if (timer->pdev->id == pdev->id) {
+ list_del(&timer->node);
+ kfree(timer);
+ ret = 0;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ return ret;
+}
+
+static struct platform_driver omap_dm_timer_driver = {
+ .probe = omap_dm_timer_probe,
+ .remove = __devexit_p(omap_dm_timer_remove),
+ .driver = {
+ .name = "omap_timer",
+ },
+};
+
+static int __init omap_dm_timer_driver_init(void)
+{
+ return platform_driver_register(&omap_dm_timer_driver);
+}
+
+static void __exit omap_dm_timer_driver_exit(void)
+{
+ platform_driver_unregister(&omap_dm_timer_driver);
+}
+
+early_platform_init("earlytimer", &omap_dm_timer_driver);
+module_init(omap_dm_timer_driver_init);
+module_exit(omap_dm_timer_driver_exit);
+
+MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/fb.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/fb.c
new file mode 100644
index 0000000..dd6f92c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/fb.c
@@ -0,0 +1,105 @@
+/*
+ * File: arch/arm/plat-omap/fb.c
+ *
+ * Framebuffer device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/io.h>
+#include <linux/omapfb.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+static bool omapfb_lcd_configured;
+static struct omapfb_platform_data omapfb_config;
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+
+static struct platform_device omap_fb_device = {
+ .name = "omapfb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &omap_fb_dma_mask,
+ .coherent_dma_mask = ~(u32)0,
+ .platform_data = &omapfb_config,
+ },
+ .num_resources = 0,
+};
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+ omapfb_config.lcd = *config;
+ omapfb_lcd_configured = true;
+}
+
+static int __init omap_init_fb(void)
+{
+ /*
+ * If the board file has not set the lcd config with
+ * omapfb_set_lcd_config(), don't bother registering the omapfb device
+ */
+ if (!omapfb_lcd_configured)
+ return 0;
+
+ return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
+
+#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+static struct omapfb_platform_data omapfb_config;
+
+static struct platform_device omap_fb_device = {
+ .name = "omapfb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &omap_fb_dma_mask,
+ .coherent_dma_mask = ~(u32)0,
+ .platform_data = &omapfb_config,
+ },
+ .num_resources = 0,
+};
+
+static int __init omap_init_fb(void)
+{
+ return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
+
+#else
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+}
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/i2c.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/i2c.c
new file mode 100644
index 0000000..db071bc
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/i2c.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/plat-omap/i2c.c
+ *
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <mach/irqs.h>
+#include <plat/mux.h>
+#include <plat/i2c.h>
+#include <plat/omap-pm.h>
+#include <plat/omap_device.h>
+
+#define OMAP_I2C_SIZE 0x3f
+#define OMAP1_I2C_BASE 0xfffb3800
+
+static const char name[] = "omap_i2c";
+
+#define I2C_RESOURCE_BUILDER(base, irq) \
+ { \
+ .start = (base), \
+ .end = (base) + OMAP_I2C_SIZE, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = (irq), \
+ .flags = IORESOURCE_IRQ, \
+ },
+
+static struct resource i2c_resources[][2] = {
+ { I2C_RESOURCE_BUILDER(0, 0) },
+};
+
+#define I2C_DEV_BUILDER(bus_id, res, data) \
+ { \
+ .id = (bus_id), \
+ .name = name, \
+ .num_resources = ARRAY_SIZE(res), \
+ .resource = (res), \
+ .dev = { \
+ .platform_data = (data), \
+ }, \
+ }
+
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
+#define OMAP_I2C_MAX_CONTROLLERS 4
+static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
+static struct platform_device omap_i2c_devices[] = {
+ I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
+};
+
+#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
+
+static int __init omap_i2c_nr_ports(void)
+{
+ int ports = 0;
+
+ if (cpu_class_is_omap1())
+ ports = 1;
+ else if (cpu_is_omap24xx())
+ ports = 2;
+ else if (cpu_is_omap34xx())
+ ports = 3;
+ else if (cpu_is_omap44xx())
+ ports = 4;
+
+ return ports;
+}
+
+static inline int omap1_i2c_add_bus(int bus_id)
+{
+ struct platform_device *pdev;
+ struct omap_i2c_bus_platform_data *pdata;
+ struct resource *res;
+
+ omap1_i2c_mux_pins(bus_id);
+
+ pdev = &omap_i2c_devices[bus_id - 1];
+ res = pdev->resource;
+ res[0].start = OMAP1_I2C_BASE;
+ res[0].end = res[0].start + OMAP_I2C_SIZE;
+ res[1].start = INT_I2C;
+ pdata = &i2c_pdata[bus_id - 1];
+
+ /* all OMAP1 have IP version 1 register set */
+ pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+ /* all OMAP1 I2C are implemented like this */
+ pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+ /* how the cpu bus is wired up differs for 7xx only */
+
+ if (cpu_is_omap7xx())
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+ else
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
+ return platform_device_register(pdev);
+}
+
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+ omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
+static inline int omap2_i2c_add_bus(int bus_id)
+{
+ int l;
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+ struct omap_i2c_bus_platform_data *pdata;
+ struct omap_i2c_dev_attr *dev_attr;
+
+ omap2_i2c_mux_pins(bus_id);
+
+ l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+ WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+ "String buffer overflow in I2C%d device setup\n", bus_id);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -EEXIST;
+ }
+
+ pdata = &i2c_pdata[bus_id - 1];
+ /*
+ * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+ * use, and functionality implementation flags, up to the OMAP I2C
+ * driver via platform data
+ */
+ pdata->rev = oh->class->rev;
+
+ dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+ pdata->flags = dev_attr->flags;
+
+ /*
+ * When waiting for completion of a i2c transfer, we need to
+ * set a wake up latency constraint for the MPU. This is to
+ * ensure quick enough wakeup from idle, when transfer
+ * completes.
+ * Only omap3 has support for constraints
+ */
+ if (cpu_is_omap34xx())
+ pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
+ pdev = omap_device_build(name, bus_id, oh, pdata,
+ sizeof(struct omap_i2c_bus_platform_data),
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
+
+ return PTR_RET(pdev);
+}
+#else
+static inline int omap2_i2c_add_bus(int bus_id)
+{
+ return 0;
+}
+#endif
+
+static int __init omap_i2c_add_bus(int bus_id)
+{
+ if (cpu_class_is_omap1())
+ return omap1_i2c_add_bus(bus_id);
+ else
+ return omap2_i2c_add_bus(bus_id);
+}
+
+/**
+ * omap_i2c_bus_setup - Process command line options for the I2C bus speed
+ * @str: String of options
+ *
+ * This function allow to override the default I2C bus speed for given I2C
+ * bus with a command line option.
+ *
+ * Format: i2c_bus=bus_id,clkrate (in kHz)
+ *
+ * Returns 1 on success, 0 otherwise.
+ */
+static int __init omap_i2c_bus_setup(char *str)
+{
+ int ports;
+ int ints[3];
+
+ ports = omap_i2c_nr_ports();
+ get_options(str, 3, ints);
+ if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+ return 0;
+ i2c_pdata[ints[1] - 1].clkrate = ints[2];
+ i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
+
+ return 1;
+}
+__setup("i2c_bus=", omap_i2c_bus_setup);
+
+/*
+ * Register busses defined in command line but that are not registered with
+ * omap_register_i2c_bus from board initialization code.
+ */
+static int __init omap_register_i2c_bus_cmdline(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
+ if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
+ i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
+ err = omap_i2c_add_bus(i + 1);
+ if (err)
+ goto out;
+ }
+
+out:
+ return err;
+}
+subsys_initcall(omap_register_i2c_bus_cmdline);
+
+/**
+ * omap_register_i2c_bus - register I2C bus with device descriptors
+ * @bus_id: bus id counting from number 1
+ * @clkrate: clock rate of the bus in kHz
+ * @info: pointer into I2C device descriptor table or NULL
+ * @len: number of descriptors in the table
+ *
+ * Returns 0 on success or an error code.
+ */
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ int err;
+
+ BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+
+ if (info) {
+ err = i2c_register_board_info(bus_id, info, len);
+ if (err)
+ return err;
+ }
+
+ if (!i2c_pdata[bus_id - 1].clkrate)
+ i2c_pdata[bus_id - 1].clkrate = clkrate;
+
+ i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
+
+ return omap_i2c_add_bus(bus_id);
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/am33xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/am33xx.h
new file mode 100644
index 0000000..06c19bb
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/am33xx.h
@@ -0,0 +1,25 @@
+/*
+ * This file contains the address info for various AM33XX modules.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_AM33XX_H
+#define __ASM_ARCH_AM33XX_H
+
+#define L4_SLOW_AM33XX_BASE 0x48000000
+
+#define AM33XX_SCM_BASE 0x44E10000
+#define AM33XX_CTRL_BASE AM33XX_SCM_BASE
+#define AM33XX_PRCM_BASE 0x44E00000
+
+#endif /* __ASM_ARCH_AM33XX_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-ams-delta.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-ams-delta.h
new file mode 100644
index 0000000..ad6f865
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
+#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO 7
+#define AMS_DELTA_GPIO_PIN_CONFIG 11
+#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO 16
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+ AMS_DELTA_LATCH2_NGPIO, (mask), (value))
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-sx1.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-sx1.h
new file mode 100644
index 0000000..355adbd
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-sx1.h
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL 0x2B
+
+#define SOFIA_I2C_ADDR 0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG 0x03
+
+#define SOFIA_USB_POWER 0x01
+#define SOFIA_MMC_POWER 0x04
+#define SOFIA_BLUETOOTH_POWER 0x08
+#define SOFIA_MMILIGHT_POWER 0x20
+
+#define SOFIA_POWER2_REG 0x04
+#define SOFIA_BACKLIGHT_REG 0x06
+#define SOFIA_KEYLIGHT_REG 0x07
+#define SOFIA_DIMMING_REG 0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-voiceblue.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-voiceblue.h
new file mode 100644
index 0000000..27916b2
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board-voiceblue.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+
+#endif /* __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board.h
new file mode 100644
index 0000000..d5eb4c8
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/board.h
@@ -0,0 +1,174 @@
+/*
+ * arch/arm/plat-omap/include/mach/board.h
+ *
+ * Information structures for board-specific data
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <plat/gpio-switch.h>
+
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ * GEN_1 = 0x01150000
+ * GEN_2 = 0x92200000
+ */
+enum {
+ OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
+ OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
+};
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK 0x4f01
+#define OMAP_TAG_GPIO_SWITCH 0x4f06
+#define OMAP_TAG_STI_CONSOLE 0x4f09
+#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
+
+#define OMAP_TAG_BOOT_REASON 0x4f80
+#define OMAP_TAG_FLASH_PART 0x4f81
+#define OMAP_TAG_VERSION_STR 0x4f82
+
+struct omap_clock_config {
+ /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+ u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+ u8 console_uart;
+ u32 console_speed;
+};
+
+struct omap_sti_console_config {
+ unsigned enable:1;
+ u8 channel;
+};
+
+struct omap_camera_sensor_config {
+ u16 reset_gpio;
+ int (*power_on)(void * data);
+ int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+ /* Configure drivers according to the connectors on your board:
+ * - "A" connector (rectagular)
+ * ... for host/OHCI use, set "register_host".
+ * - "B" connector (squarish) or "Mini-B"
+ * ... for device/gadget use, set "register_dev".
+ * - "Mini-AB" connector (very similar to Mini-B)
+ * ... for OTG use as device OR host, initialize "otg"
+ */
+ unsigned register_host:1;
+ unsigned register_dev:1;
+ u8 otg; /* port number, 1-based: usb1 == 2 */
+
+ u8 hmc_mode;
+
+ /* implicitly true if otg: host supports remote wakeup? */
+ u8 rwc;
+
+ /* signaling pins used to talk to transceiver on usbN:
+ * 0 == usbN unused
+ * 2 == usb0-only, using internal transceiver
+ * 3 == 3 wire bidirectional
+ * 4 == 4 wire bidirectional
+ * 6 == 6 wire unidirectional (or TLL)
+ */
+ u8 pins[3];
+
+ struct platform_device *udc_device;
+ struct platform_device *ohci_device;
+ struct platform_device *otg_device;
+
+ u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+ u32 (*usb1_init)(unsigned nwires);
+ u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+};
+
+struct omap_lcd_config {
+ char panel_name[16];
+ char ctrl_name[16];
+ s16 nreset_gpio;
+ u8 data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+ int default_intensity;
+ int (*set_power)(struct device *dev, int state);
+};
+
+struct omap_fbmem_config {
+ u32 start;
+ u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+ const char *name;
+ int intensity_timer;
+ int blink_timer;
+ void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+struct omap_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+ char part_table[0];
+};
+
+struct omap_boot_reason_config {
+ char reason_str[12];
+};
+
+struct omap_version_config {
+ char component[12];
+ char version[12];
+};
+
+struct omap_board_config_entry {
+ u16 tag;
+ u16 len;
+ u8 data[0];
+};
+
+struct omap_board_config_kernel {
+ u16 tag;
+ const void *data;
+};
+
+extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+ ((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+ ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *__init omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+/* OMAP3EVM revision */
+#if defined(CONFIG_MACH_OMAP3EVM)
+u8 get_omap3_evm_rev(void);
+#else
+#define get_omap3_evm_rev() (-EINVAL)
+#endif
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/clkdev_omap.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/clkdev_omap.h
new file mode 100644
index 0000000..b299b8d
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -0,0 +1,52 @@
+/*
+ * clkdev <-> OMAP integration
+ *
+ * Russell King <linux@arm.linux.org.uk>
+ *
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+
+#include <linux/clkdev.h>
+
+struct omap_clk {
+ u16 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310 (1 << 0)
+#define CK_7XX (1 << 1) /* 7xx, 850 */
+#define CK_1510 (1 << 2)
+#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
+#define CK_242X (1 << 4)
+#define CK_243X (1 << 5) /* 243x, 253x */
+#define CK_3430ES1 (1 << 6) /* 34xxES1 only */
+#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_3505 (1 << 8)
+#define CK_3517 (1 << 9)
+#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
+#define CK_443X (1 << 11)
+#define CK_TI816X (1 << 12)
+#define CK_446X (1 << 13)
+#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
+
+
+#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_AM35XX (CK_3505 | CK_3517) /* all Sitara AM35xx */
+#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
+
+
+#endif
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/clock.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/clock.h
new file mode 100644
index 0000000..d0ef57c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/clock.h
@@ -0,0 +1,306 @@
+/*
+ * OMAP clock: data structure definitions, function prototypes, shared macros
+ *
+ * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+#include <linux/list.h>
+
+struct module;
+struct clk;
+struct clockdomain;
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX (1 << 4)
+#define RATE_IN_4430 (1 << 5)
+#define RATE_IN_TI816X (1 << 6)
+#define RATE_IN_4460 (1 << 7)
+#define RATE_IN_AM33XX (1 << 8)
+#define RATE_IN_TI814X (1 << 9)
+
+#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ */
+struct clksel_rate {
+ u32 val;
+ u8 div;
+ u16 flags;
+};
+
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+ struct clk *parent;
+ const struct clksel_rate *rates;
+};
+
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+ void __iomem *mult_div1_reg;
+ u32 mult_mask;
+ u32 div1_mask;
+ struct clk *clk_bypass;
+ struct clk *clk_ref;
+ void __iomem *control_reg;
+ u32 enable_mask;
+ unsigned long last_rounded_rate;
+ u16 last_rounded_m;
+ u16 max_multiplier;
+ u8 last_rounded_n;
+ u8 min_divider;
+ u16 max_divider;
+ u8 modes;
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ void __iomem *autoidle_reg;
+ void __iomem *idlest_reg;
+ u32 autoidle_mask;
+ u32 freqsel_mask;
+ u32 idlest_mask;
+ u32 dco_mask;
+ u32 sddiv_mask;
+ u8 auto_recal_bit;
+ u8 recal_en_bit;
+ u8 recal_st_bit;
+# endif
+ u8 flags;
+};
+
+#endif
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ void __iomem *clksel_reg;
+ u32 clksel_mask;
+ const struct clksel *clksel;
+ struct dpll_data *dpll_data;
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
+#else
+ u8 rate_offset;
+ u8 src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/common.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/common.h
new file mode 100644
index 0000000..b4d7ec3
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/common.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <plat/i2c.h>
+#include <plat/omap_hwmod.h>
+
+extern int __init omap_init_clocksource_32k(void);
+
+extern void omap_reserve(void);
+extern int omap_dss_reset(struct omap_hwmod *);
+
+void omap_sram_init(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/cpu.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/cpu.h
new file mode 100644
index 0000000..dc6a86b
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/cpu.h
@@ -0,0 +1,514 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#include <linux/bitops.h>
+#include <plat/multi.h>
+
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
+/*
+ * omap_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx(): True for OMAP730, OMAP850
+ * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x(): True for OMAP2430
+ * cpu_is_omap343x(): True for OMAP3430
+ * cpu_is_omap443x(): True for OMAP4430
+ * cpu_is_omap446x(): True for OMAP4460
+ * cpu_is_omap447x(): True for OMAP4470
+ */
+#define GET_OMAP_CLASS (omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_AM_CLASS(class, id) \
+static inline int is_am ##class (void) \
+{ \
+ return (GET_AM_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id) \
+static inline int is_ti ##class (void) \
+{ \
+ return (GET_TI_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_TI_SUBCLASS(subclass, id) \
+static inline int is_ti ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_AM_SUBCLASS(subclass, id) \
+static inline int is_am ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(33xx, 0x33)
+
+IS_TI_CLASS(81xx, 0x81)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
+
+IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
+
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap242x() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap343x() 0
+#define cpu_is_ti81xx() 0
+#define cpu_is_ti816x() 0
+#define cpu_is_ti814x() 0
+#define cpu_is_am33xx() 0
+#define cpu_is_am335x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
+#define cpu_is_omap446x() 0
+#define cpu_is_omap447x() 0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() 1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() is_omap24xx()
+# endif
+# if defined (CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() is_omap242x()
+# endif
+# if defined (CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# undef cpu_is_omap343x
+# define cpu_is_omap34xx() is_omap34xx()
+# define cpu_is_omap343x() is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# define cpu_is_omap34xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP3430)
+# undef cpu_is_omap343x
+# define cpu_is_omap343x() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330(): True for OMAP330
+ * cpu_is_omap730(): True for OMAP730
+ * cpu_is_omap850(): True for OMAP850
+ * cpu_is_omap1510(): True for OMAP1510
+ * cpu_is_omap1610(): True for OMAP1610
+ * cpu_is_omap1611(): True for OMAP1611
+ * cpu_is_omap5912(): True for OMAP5912
+ * cpu_is_omap1621(): True for OMAP1621
+ * cpu_is_omap1710(): True for OMAP1710
+ * cpu_is_omap2420(): True for OMAP2420
+ * cpu_is_omap2422(): True for OMAP2422
+ * cpu_is_omap2423(): True for OMAP2423
+ * cpu_is_omap2430(): True for OMAP2430
+ * cpu_is_omap3430(): True for OMAP3430
+ * cpu_is_omap3505(): True for OMAP3505
+ * cpu_is_omap3517(): True for OMAP3517
+ */
+#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(850, 0x0850)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+IS_OMAP_TYPE(3505, 0x3517)
+IS_OMAP_TYPE(3517, 0x3517)
+
+#define cpu_is_omap310() 0
+#define cpu_is_omap730() 0
+#define cpu_is_omap850() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap5912() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+#define cpu_is_omap2420() 0
+#define cpu_is_omap2422() 0
+#define cpu_is_omap2423() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap3503() 0
+#define cpu_is_omap3515() 0
+#define cpu_is_omap3525() 0
+#define cpu_is_omap3530() 0
+#define cpu_is_omap3505() 0
+#define cpu_is_omap3517() 0
+#define cpu_is_omap3430() 0
+#define cpu_is_omap3630() 0
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap730
+# define cpu_is_omap730() is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() is_omap850()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap310
+# undef cpu_is_omap1510
+# define cpu_is_omap310() is_omap310()
+# define cpu_is_omap1510() is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap1610
+# undef cpu_is_omap1611
+# undef cpu_is_omap5912
+# undef cpu_is_omap1621
+# undef cpu_is_omap1710
+# define cpu_is_omap1610() is_omap1610()
+# define cpu_is_omap1611() is_omap1611()
+# define cpu_is_omap5912() is_omap5912()
+# define cpu_is_omap1621() is_omap1621()
+# define cpu_is_omap1710() is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap2420
+# undef cpu_is_omap2422
+# undef cpu_is_omap2423
+# undef cpu_is_omap2430
+# define cpu_is_omap2420() is_omap2420()
+# define cpu_is_omap2422() is_omap2422()
+# define cpu_is_omap2423() is_omap2423()
+# define cpu_is_omap2430() is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap3430
+# undef cpu_is_omap3503
+# undef cpu_is_omap3515
+# undef cpu_is_omap3525
+# undef cpu_is_omap3530
+# undef cpu_is_omap3505
+# undef cpu_is_omap3517
+# undef cpu_is_ti81xx
+# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef cpu_is_am33xx
+# undef cpu_is_am335x
+# define cpu_is_omap3430() is_omap3430()
+# define cpu_is_omap3503() (cpu_is_omap3430() && \
+ (!omap3_has_iva()) && \
+ (!omap3_has_sgx()))
+# define cpu_is_omap3515() (cpu_is_omap3430() && \
+ (!omap3_has_iva()) && \
+ (omap3_has_sgx()))
+# define cpu_is_omap3525() (cpu_is_omap3430() && \
+ (!omap3_has_sgx()) && \
+ (omap3_has_iva()))
+# define cpu_is_omap3530() (cpu_is_omap3430())
+# define cpu_is_omap3517() is_omap3517()
+# define cpu_is_omap3505() (cpu_is_omap3517() && \
+ !omap3_has_sgx())
+# undef cpu_is_omap3630
+# define cpu_is_omap3630() is_omap363x()
+# define cpu_is_ti81xx() is_ti81xx()
+# define cpu_is_ti816x() is_ti816x()
+# define cpu_is_ti814x() is_ti814x()
+# define cpu_is_am33xx() is_am33xx()
+# define cpu_is_am335x() is_am335x()
+#endif
+
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# undef cpu_is_omap446x
+# undef cpu_is_omap447x
+# define cpu_is_omap44xx() is_omap44xx()
+# define cpu_is_omap443x() is_omap443x()
+# define cpu_is_omap446x() is_omap446x()
+# define cpu_is_omap447x() is_omap447x()
+# endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
+ cpu_is_omap16xx())
+#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
+ cpu_is_omap44xx())
+
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS 0x24200024
+#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
+
+#define OMAP243X_CLASS 0x24300024
+#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
+
+#define OMAP343X_CLASS 0x34300034
+#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
+
+#define OMAP363X_CLASS 0x36300034
+#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
+
+#define OMAP3517_CLASS 0x35170034
+#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
+#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
+
+#define TI816X_CLASS 0x81600034
+#define TI8168_REV_ES1_0 TI816X_CLASS
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
+
+#define TI814X_CLASS 0x81400034
+#define TI8148_REV_ES1_0 TI814X_CLASS
+#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
+
+#define AM335X_CLASS 0x33500034
+#define AM335X_REV_ES1_0 AM335X_CLASS
+
+#define OMAP443X_CLASS 0x44300044
+#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
+
+#define OMAP446X_CLASS 0x44600044
+#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
+
+#define OMAP447X_CLASS 0x44700044
+#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
+
+/*
+ * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ * family have OS-level control over the I/O chain clock. This is
+ * to avoid a window during which wakeups could potentially be lost
+ * during powerdomain transitions. If this bit is set, it
+ * indicates that the chip does support OS-level control of this
+ * feature.
+ */
+extern u32 omap_features;
+
+#define OMAP3_HAS_L2CACHE BIT(0)
+#define OMAP3_HAS_IVA BIT(1)
+#define OMAP3_HAS_SGX BIT(2)
+#define OMAP3_HAS_NEON BIT(3)
+#define OMAP3_HAS_ISP BIT(4)
+#define OMAP3_HAS_192MHZ_CLK BIT(5)
+#define OMAP3_HAS_IO_WAKEUP BIT(6)
+#define OMAP3_HAS_SDRC BIT(7)
+#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
+#define OMAP4_HAS_MPU_1GHZ BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ BIT(11)
+
+
+#define OMAP3_HAS_FEATURE(feat,flag) \
+static inline unsigned int omap3_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP3_HAS_ ##flag; \
+} \
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
+
+/*
+ * Runtime detection of OMAP4 features
+ */
+#define OMAP4_HAS_FEATURE(feat, flag) \
+static inline unsigned int omap4_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP4_HAS_ ##flag; \
+} \
+
+OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
+OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
+OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dma-44xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dma-44xx.h
new file mode 100644
index 0000000..1f767cb
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dma-44xx.h
@@ -0,0 +1,147 @@
+/*
+ * OMAP4 SDMA channel definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+
+#define OMAP44XX_DMA_SYS_REQ0 2
+#define OMAP44XX_DMA_SYS_REQ1 3
+#define OMAP44XX_DMA_GPMC 4
+#define OMAP44XX_DMA_DSS_DISPC_REQ 6
+#define OMAP44XX_DMA_SYS_REQ2 7
+#define OMAP44XX_DMA_MCASP1_AXEVT 8
+#define OMAP44XX_DMA_ISS_REQ1 9
+#define OMAP44XX_DMA_ISS_REQ2 10
+#define OMAP44XX_DMA_MCASP1_AREVT 11
+#define OMAP44XX_DMA_ISS_REQ3 12
+#define OMAP44XX_DMA_ISS_REQ4 13
+#define OMAP44XX_DMA_DSS_RFBI_REQ 14
+#define OMAP44XX_DMA_SPI3_TX0 15
+#define OMAP44XX_DMA_SPI3_RX0 16
+#define OMAP44XX_DMA_MCBSP2_TX 17
+#define OMAP44XX_DMA_MCBSP2_RX 18
+#define OMAP44XX_DMA_MCBSP3_TX 19
+#define OMAP44XX_DMA_MCBSP3_RX 20
+#define OMAP44XX_DMA_C2C_SSCM_GPO0 21
+#define OMAP44XX_DMA_C2C_SSCM_GPO1 22
+#define OMAP44XX_DMA_SPI3_TX1 23
+#define OMAP44XX_DMA_SPI3_RX1 24
+#define OMAP44XX_DMA_I2C3_TX 25
+#define OMAP44XX_DMA_I2C3_RX 26
+#define OMAP44XX_DMA_I2C1_TX 27
+#define OMAP44XX_DMA_I2C1_RX 28
+#define OMAP44XX_DMA_I2C2_TX 29
+#define OMAP44XX_DMA_I2C2_RX 30
+#define OMAP44XX_DMA_MCBSP4_TX 31
+#define OMAP44XX_DMA_MCBSP4_RX 32
+#define OMAP44XX_DMA_MCBSP1_TX 33
+#define OMAP44XX_DMA_MCBSP1_RX 34
+#define OMAP44XX_DMA_SPI1_TX0 35
+#define OMAP44XX_DMA_SPI1_RX0 36
+#define OMAP44XX_DMA_SPI1_TX1 37
+#define OMAP44XX_DMA_SPI1_RX1 38
+#define OMAP44XX_DMA_SPI1_TX2 39
+#define OMAP44XX_DMA_SPI1_RX2 40
+#define OMAP44XX_DMA_SPI1_TX3 41
+#define OMAP44XX_DMA_SPI1_RX3 42
+#define OMAP44XX_DMA_SPI2_TX0 43
+#define OMAP44XX_DMA_SPI2_RX0 44
+#define OMAP44XX_DMA_SPI2_TX1 45
+#define OMAP44XX_DMA_SPI2_RX1 46
+#define OMAP44XX_DMA_MMC2_TX 47
+#define OMAP44XX_DMA_MMC2_RX 48
+#define OMAP44XX_DMA_UART1_TX 49
+#define OMAP44XX_DMA_UART1_RX 50
+#define OMAP44XX_DMA_UART2_TX 51
+#define OMAP44XX_DMA_UART2_RX 52
+#define OMAP44XX_DMA_UART3_TX 53
+#define OMAP44XX_DMA_UART3_RX 54
+#define OMAP44XX_DMA_UART4_TX 55
+#define OMAP44XX_DMA_UART4_RX 56
+#define OMAP44XX_DMA_MMC4_TX 57
+#define OMAP44XX_DMA_MMC4_RX 58
+#define OMAP44XX_DMA_MMC5_TX 59
+#define OMAP44XX_DMA_MMC5_RX 60
+#define OMAP44XX_DMA_MMC1_TX 61
+#define OMAP44XX_DMA_MMC1_RX 62
+#define OMAP44XX_DMA_SYS_REQ3 64
+#define OMAP44XX_DMA_MCPDM_UP 65
+#define OMAP44XX_DMA_MCPDM_DL 66
+#define OMAP44XX_DMA_DMIC_REQ 67
+#define OMAP44XX_DMA_C2C_SSCM_GPO2 68
+#define OMAP44XX_DMA_C2C_SSCM_GPO3 69
+#define OMAP44XX_DMA_SPI4_TX0 70
+#define OMAP44XX_DMA_SPI4_RX0 71
+#define OMAP44XX_DMA_DSS_DSI1_REQ0 72
+#define OMAP44XX_DMA_DSS_DSI1_REQ1 73
+#define OMAP44XX_DMA_DSS_DSI1_REQ2 74
+#define OMAP44XX_DMA_DSS_DSI1_REQ3 75
+#define OMAP44XX_DMA_DSS_HDMI_REQ 76
+#define OMAP44XX_DMA_MMC3_TX 77
+#define OMAP44XX_DMA_MMC3_RX 78
+#define OMAP44XX_DMA_USIM_TX 79
+#define OMAP44XX_DMA_USIM_RX 80
+#define OMAP44XX_DMA_DSS_DSI2_REQ0 81
+#define OMAP44XX_DMA_DSS_DSI2_REQ1 82
+#define OMAP44XX_DMA_DSS_DSI2_REQ2 83
+#define OMAP44XX_DMA_DSS_DSI2_REQ3 84
+#define OMAP44XX_DMA_SLIMBUS1_TX0 85
+#define OMAP44XX_DMA_SLIMBUS1_TX1 86
+#define OMAP44XX_DMA_SLIMBUS1_TX2 87
+#define OMAP44XX_DMA_SLIMBUS1_TX3 88
+#define OMAP44XX_DMA_SLIMBUS1_RX0 89
+#define OMAP44XX_DMA_SLIMBUS1_RX1 90
+#define OMAP44XX_DMA_SLIMBUS1_RX2 91
+#define OMAP44XX_DMA_SLIMBUS1_RX3 92
+#define OMAP44XX_DMA_SLIMBUS2_TX0 93
+#define OMAP44XX_DMA_SLIMBUS2_TX1 94
+#define OMAP44XX_DMA_SLIMBUS2_TX2 95
+#define OMAP44XX_DMA_SLIMBUS2_TX3 96
+#define OMAP44XX_DMA_SLIMBUS2_RX0 97
+#define OMAP44XX_DMA_SLIMBUS2_RX1 98
+#define OMAP44XX_DMA_SLIMBUS2_RX2 99
+#define OMAP44XX_DMA_SLIMBUS2_RX3 100
+#define OMAP44XX_DMA_ABE_REQ_0 101
+#define OMAP44XX_DMA_ABE_REQ_1 102
+#define OMAP44XX_DMA_ABE_REQ_2 103
+#define OMAP44XX_DMA_ABE_REQ_3 104
+#define OMAP44XX_DMA_ABE_REQ_4 105
+#define OMAP44XX_DMA_ABE_REQ_5 106
+#define OMAP44XX_DMA_ABE_REQ_6 107
+#define OMAP44XX_DMA_ABE_REQ_7 108
+#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109
+#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110
+#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111
+#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112
+#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113
+#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114
+#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115
+#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116
+#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117
+#define OMAP44XX_DMA_SHA2_CTXIN_P 118
+#define OMAP44XX_DMA_SHA2_DIN_P 119
+#define OMAP44XX_DMA_SHA2_CTXOUT_P 120
+#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121
+#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122
+#define OMAP44XX_DMA_I2C4_TX 124
+#define OMAP44XX_DMA_I2C4_RX 125
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dma.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dma.h
new file mode 100644
index 0000000..dc562a5
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dma.h
@@ -0,0 +1,538 @@
+/*
+ * arch/arm/plat-omap/include/mach/dma.h
+ *
+ * Copyright (C) 2003 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/platform_device.h>
+
+/*
+ * TODO: These dma channel defines should go away once all
+ * the omap drivers hwmod adapted.
+ */
+
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE 0
+#define OMAP_DMA_MCSI1_TX 1
+#define OMAP_DMA_MCSI1_RX 2
+#define OMAP_DMA_I2C_RX 3
+#define OMAP_DMA_I2C_TX 4
+#define OMAP_DMA_EXT_NDMA_REQ 5
+#define OMAP_DMA_EXT_NDMA_REQ2 6
+#define OMAP_DMA_UWIRE_TX 7
+#define OMAP_DMA_MCBSP1_TX 8
+#define OMAP_DMA_MCBSP1_RX 9
+#define OMAP_DMA_MCBSP3_TX 10
+#define OMAP_DMA_MCBSP3_RX 11
+#define OMAP_DMA_UART1_TX 12
+#define OMAP_DMA_UART1_RX 13
+#define OMAP_DMA_UART2_TX 14
+#define OMAP_DMA_UART2_RX 15
+#define OMAP_DMA_MCBSP2_TX 16
+#define OMAP_DMA_MCBSP2_RX 17
+#define OMAP_DMA_UART3_TX 18
+#define OMAP_DMA_UART3_RX 19
+#define OMAP_DMA_CAMERA_IF_RX 20
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_NAND 23
+#define OMAP_DMA_IRQ_LCD_LINE 24
+#define OMAP_DMA_MEMORY_STICK 25
+#define OMAP_DMA_USB_W2FC_RX0 26
+#define OMAP_DMA_USB_W2FC_RX1 27
+#define OMAP_DMA_USB_W2FC_RX2 28
+#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_TX1 30
+#define OMAP_DMA_USB_W2FC_TX2 31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN 32
+#define OMAP_DMA_SPI_TX 33
+#define OMAP_DMA_SPI_RX 34
+#define OMAP_DMA_CRYPTO_HASH 35
+#define OMAP_DMA_CCP_ATTN 36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+#define OMAP_DMA_CRYPTO_DES_OUT 56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE 0
+#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
+
+#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
+
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX 54
+#define AM35XX_DMA_UART4_RX 55
+
+/*----------------------------------------------------------------------------*/
+
+#define OMAP1_DMA_TOUT_IRQ (1 << 0)
+#define OMAP_DMA_DROP_IRQ (1 << 1)
+#define OMAP_DMA_HALF_IRQ (1 << 2)
+#define OMAP_DMA_FRAME_IRQ (1 << 3)
+#define OMAP_DMA_LAST_IRQ (1 << 4)
+#define OMAP_DMA_BLOCK_IRQ (1 << 5)
+#define OMAP1_DMA_SYNC_IRQ (1 << 6)
+#define OMAP2_DMA_PKT_IRQ (1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11)
+
+#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9)
+#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10)
+#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24)
+#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25)
+
+#define OMAP_DMA_DATA_TYPE_S8 0x00
+#define OMAP_DMA_DATA_TYPE_S16 0x01
+#define OMAP_DMA_DATA_TYPE_S32 0x02
+
+#define OMAP_DMA_SYNC_ELEMENT 0x00
+#define OMAP_DMA_SYNC_FRAME 0x01
+#define OMAP_DMA_SYNC_BLOCK 0x02
+#define OMAP_DMA_SYNC_PACKET 0x03
+
+#define OMAP_DMA_DST_SYNC_PREFETCH 0x02
+#define OMAP_DMA_SRC_SYNC 0x01
+#define OMAP_DMA_DST_SYNC 0x00
+
+#define OMAP_DMA_PORT_EMIFF 0x00
+#define OMAP_DMA_PORT_EMIFS 0x01
+#define OMAP_DMA_PORT_OCP_T1 0x02
+#define OMAP_DMA_PORT_TIPB 0x03
+#define OMAP_DMA_PORT_OCP_T2 0x04
+#define OMAP_DMA_PORT_MPUI 0x05
+
+#define OMAP_DMA_AMODE_CONSTANT 0x00
+#define OMAP_DMA_AMODE_POST_INC 0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX 0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH 0x10
+#define DMA_DEFAULT_ARB_RATE 0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET (0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT (0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET (0x03 << 12)
+#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75 (0x01 << 14)
+#define DMA_THREAD_FIFO_25 (0x02 << 14)
+#define DMA_THREAD_FIFO_50 (0x03 << 14)
+
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8)
+#define DMA_SYSCONFIG_EMUFREE (1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET (1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE (1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE 0x2
+#define DMA_IDLEMODE_NO_IDLE 0x1
+#define DMA_IDLEMODE_FORCE_IDLE 0x0
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN 0x1
+#define OMAP_DMA_DYNAMIC_CHAIN 0x2
+#define OMAP_DMA_CHAIN_ACTIVE 0x1
+#define OMAP_DMA_CHAIN_INACTIVE 0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH 0x1
+#define DMA_CH_PRIO_LOW 0x0 /* Def */
+
+/* Errata handling */
+#define IS_DMA_ERRATA(id) (errata & (id))
+#define SET_DMA_ERRATA(id) (errata |= (id))
+
+#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0)
+#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1)
+#define DMA_ERRATA_i378 BIT(0x2)
+#define DMA_ERRATA_i541 BIT(0x3)
+#define DMA_ERRATA_i88 BIT(0x4)
+#define DMA_ERRATA_3_3 BIT(0x5)
+#define DMA_ROMCODE_BUG BIT(0x6)
+
+/* Attributes for OMAP DMA Contrller */
+#define DMA_LINKED_LCH BIT(0x0)
+#define GLOBAL_PRIORITY BIT(0x1)
+#define RESERVE_CHANNEL BIT(0x2)
+#define IS_CSSA_32 BIT(0x3)
+#define IS_CDSA_32 BIT(0x4)
+#define IS_RW_PRIORITY BIT(0x5)
+#define ENABLE_1510_MODE BIT(0x6)
+#define SRC_PORT BIT(0x7)
+#define DST_PORT BIT(0x8)
+#define SRC_INDEX BIT(0x9)
+#define DST_INDEX BIT(0xA)
+#define IS_BURST_ONLY4 BIT(0xB)
+#define CLEAR_CSR_ON_READ BIT(0xC)
+#define IS_WORD_16 BIT(0xD)
+
+enum omap_reg_offsets {
+
+GCR, GSCR, GRST1, HW_ID,
+PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID,
+PCHD_ID, CAPS_0, CAPS_1, CAPS_2,
+CAPS_3, CAPS_4, PCH2_SR, PCH0_SR,
+PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0,
+IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0,
+IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS,
+OCP_SYSCONFIG,
+
+/* omap1+ specific */
+CPC, CCR2, LCH_CTRL,
+
+/* Common registers for all omap's */
+CSDP, CCR, CICR, CSR,
+CEN, CFN, CSFI, CSEI,
+CSAC, CDAC, CDEI,
+CDFI, CLNK_CTRL,
+
+/* Channel specific registers */
+CSSA, CDSA, COLOR,
+CCEN, CCFN,
+
+/* omap3630 and omap4 specific */
+CDP, CNDP, CCDN,
+
+};
+
+enum omap_dma_burst_mode {
+ OMAP_DMA_DATA_BURST_DIS = 0,
+ OMAP_DMA_DATA_BURST_4,
+ OMAP_DMA_DATA_BURST_8,
+ OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+ OMAP_DMA_LITTLE_ENDIAN = 0,
+ OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+ OMAP_DMA_COLOR_DIS = 0,
+ OMAP_DMA_CONSTANT_FILL,
+ OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+ OMAP_DMA_WRITE_NON_POSTED = 0,
+ OMAP_DMA_WRITE_POSTED,
+ OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+ OMAP_DMA_LCH_2D = 0,
+ OMAP_DMA_LCH_G,
+ OMAP_DMA_LCH_P,
+ OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+ int data_type; /* data type 8,16,32 */
+ int elem_count; /* number of elements in a frame */
+ int frame_count; /* number of frames in a element */
+
+ int src_port; /* Only on OMAP1 REVISIT: Is this needed? */
+ int src_amode; /* constant, post increment, indexed,
+ double indexed */
+ unsigned long src_start; /* source address : physical */
+ int src_ei; /* source element index */
+ int src_fi; /* source frame index */
+
+ int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */
+ int dst_amode; /* constant, post increment, indexed,
+ double indexed */
+ unsigned long dst_start; /* source address : physical */
+ int dst_ei; /* source element index */
+ int dst_fi; /* source frame index */
+
+ int trigger; /* trigger attached if the channel is
+ synchronized */
+ int sync_mode; /* sycn on element, frame , block or packet */
+ int src_or_dst_synch; /* source synch(1) or destination synch(0) */
+
+ int ie; /* interrupt enabled */
+
+ unsigned char read_prio;/* read priority */
+ unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+ enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+struct omap_dma_lch {
+ int next_lch;
+ int dev_id;
+ u16 saved_csr;
+ u16 enabled_irqs;
+ const char *dev_name;
+ void (*callback)(int lch, u16 ch_status, void *data);
+ void *data;
+ long flags;
+ /* required for Dynamic chaining */
+ int prev_linked_ch;
+ int next_linked_ch;
+ int state;
+ int chain_id;
+ int status;
+};
+
+struct omap_dma_dev_attr {
+ u32 dev_caps;
+ u16 lch_count;
+ u16 chan_count;
+ struct omap_dma_lch *chan;
+};
+
+/* System DMA platform data structure */
+struct omap_system_dma_plat_info {
+ struct omap_dma_dev_attr *dma_attr;
+ u32 errata;
+ void (*disable_irq_lch)(int lch);
+ void (*show_dma_caps)(void);
+ void (*clear_lch_regs)(int lch);
+ void (*clear_dma)(int lch);
+ void (*dma_write)(u32 val, int reg, int lch);
+ u32 (*dma_read)(int reg, int lch);
+};
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+ int elem_count, int frame_count,
+ int sync_mode,
+ int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+ u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+ unsigned long src_start,
+ int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+ enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+ unsigned long dest_start,
+ int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+ enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+ struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+ int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+ unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+void omap_dma_global_context_save(void);
+void omap_dma_global_context_restore(void);
+
+extern void omap_dma_disable_irq(int lch);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+ void (*callback) (int lch, u16 ch_status,
+ void *data),
+ int *chain_id, int no_of_chans,
+ int chain_mode,
+ struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+ int dest_start, int elem_count,
+ int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+ struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
+#include <mach/lcd_dma.h>
+#else
+static inline int omap_lcd_dma_running(void)
+{
+ return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dmtimer.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dmtimer.h
new file mode 100644
index 0000000..9418f00
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -0,0 +1,427 @@
+/*
+ * arch/arm/plat-omap/include/plat/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Platform device conversion and hwmod support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK 0x00
+#define OMAP_TIMER_SRC_32_KHZ 0x01
+#define OMAP_TIMER_SRC_EXT_CLK 0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE (1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW (1 << 1)
+#define OMAP_TIMER_INT_MATCH (1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE 0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
+
+/*
+ * IP revision identifier so that Highlander IP
+ * in OMAP4 can be distinguished.
+ */
+#define OMAP_TIMER_IP_VERSION_1 0x1
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE 0x80000000
+#define OMAP_TIMER_ALWON 0x40000000
+#define OMAP_TIMER_HAS_PWM 0x20000000
+
+struct omap_timer_capability_dev_attr {
+ u32 timer_capability;
+};
+
+struct omap_dm_timer;
+struct clk;
+
+struct timer_regs {
+ u32 tidr;
+ u32 tiocp_cfg;
+ u32 tistat;
+ u32 tisr;
+ u32 tier;
+ u32 twer;
+ u32 tclr;
+ u32 tcrr;
+ u32 tldr;
+ u32 ttrg;
+ u32 twps;
+ u32 tmar;
+ u32 tcar1;
+ u32 tsicr;
+ u32 tcar2;
+ u32 tpir;
+ u32 tnir;
+ u32 tcvr;
+ u32 tocr;
+ u32 towr;
+};
+
+struct dmtimer_platform_data {
+ int (*set_timer_src)(struct platform_device *pdev, int source);
+ int timer_ip_version;
+ u32 needs_manual_reset:1;
+ bool reserved;
+
+ bool loses_context;
+
+ int (*get_context_loss_count)(struct device *dev);
+};
+
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+int omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_enable(struct omap_dm_timer *timer);
+void omap_dm_timer_disable(struct omap_dm_timer *timer);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
+
+int omap_dm_timer_trigger(struct omap_dm_timer *timer);
+int omap_dm_timer_start(struct omap_dm_timer *timer);
+int omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+
+int omap_dm_timers_active(void);
+
+/*
+ * Do not use the defines below, they are not needed. They should be only
+ * used by dmtimer.c and sys_timer related code.
+ */
+
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET 0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET 0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14
+#define OMAP_TIMER_V1_STAT_OFFSET 0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24
+#define OMAP_TIMER_V2_IRQSTATUS 0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET 0x14
+
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
+#define _OMAP_TIMER_CTRL_OFFSET 0x24
+#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
+#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
+#define OMAP_TIMER_CTRL_PT (1 << 12)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
+#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
+#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */
+#define OMAP_TIMER_CTRL_POSTED (1 << 2)
+#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET 0x28
+#define _OMAP_TIMER_LOAD_OFFSET 0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET 0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34
+#define WP_NONE 0 /* no write pending bit */
+#define WP_TCLR (1 << 0)
+#define WP_TCRR (1 << 1)
+#define WP_TLDR (1 << 2)
+#define WP_TTGR (1 << 3)
+#define WP_TMAR (1 << 4)
+#define WP_TPIR (1 << 5)
+#define WP_TNIR (1 << 6)
+#define WP_TCVR (1 << 7)
+#define WP_TOCR (1 << 8)
+#define WP_TOWR (1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET 0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define WPSHIFT 16
+
+#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \
+ | (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \
+ | (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \
+ | (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \
+ | (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \
+ | (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \
+ | (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \
+ | (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \
+ | (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
+
+struct omap_dm_timer {
+ unsigned long phys_base;
+ int id;
+ int irq;
+ struct clk *iclk, *fclk;
+
+ void __iomem *io_base;
+ void __iomem *sys_stat; /* TISTAT timer status */
+ void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */
+ void __iomem *irq_ena; /* irq enable */
+ void __iomem *irq_dis; /* irq disable, only on v2 ip */
+ void __iomem *pend; /* write pending */
+ void __iomem *func_base; /* function register base */
+
+ unsigned long rate;
+ unsigned reserved:1;
+ unsigned posted:1;
+ struct timer_regs context;
+ bool loses_context;
+ int ctx_loss_count;
+ int revision;
+ struct platform_device *pdev;
+ struct list_head node;
+
+ int (*get_context_loss_count)(struct device *dev);
+};
+
+int omap_dm_timer_prepare(struct omap_dm_timer *timer);
+
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
+ int posted)
+{
+ if (posted)
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ return __raw_readl(timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
+{
+ if (posted)
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+ cpu_relax();
+
+ __raw_writel(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = __raw_readl(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->sys_stat = timer->io_base +
+ OMAP_TIMER_V1_SYS_STAT_OFFSET;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = 0;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->sys_stat = 0;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
+}
+
+/* Assumes the source clock has been set by caller */
+static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
+ int autoidle, int wakeup)
+{
+ u32 l;
+
+ l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
+ l |= 0x02 << 3; /* Set to smart-idle mode */
+ l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
+
+ if (autoidle)
+ l |= 0x1 << 0;
+
+ if (wakeup)
+ l |= 1 << 2;
+
+ __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
+
+ /* Match hardware reset default of posted mode */
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
+ OMAP_TIMER_CTRL_POSTED, 0);
+}
+
+static inline int __omap_dm_timer_set_source(struct clk *timer_fck,
+ struct clk *parent)
+{
+ int ret;
+
+ clk_disable(timer_fck);
+ ret = clk_set_parent(timer_fck, parent);
+ clk_enable(timer_fck);
+
+ /*
+ * When the functional clock disappears, too quick writes seem
+ * to cause an abort. XXX Is this still necessary?
+ */
+ __delay(300000);
+
+ return ret;
+}
+
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
+{
+ u32 l;
+
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ /* Readback to make sure write has completed */
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / rate + 1);
+#endif
+ }
+
+ /* Ack possibly pending interrupt */
+ __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+}
+
+static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
+ u32 ctrl, unsigned int load,
+ int posted)
+{
+ __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
+}
+
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ __raw_writel(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
+{
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
+ unsigned int value)
+{
+ __raw_writel(value, timer->irq_stat);
+}
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dsp.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dsp.h
new file mode 100644
index 0000000..9c604b3
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/dsp.h
@@ -0,0 +1,31 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+ void (*dsp_set_min_opp) (u8 opp_id);
+ u8 (*dsp_get_opp) (void);
+ void (*cpu_set_freq) (unsigned long f);
+ unsigned long (*cpu_get_freq) (void);
+ unsigned long mpu_speed[6];
+
+ /* functions to write and read PRCM registers */
+ void (*dsp_prm_write)(u32, s16 , u16);
+ u32 (*dsp_prm_read)(s16 , u16);
+ u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+ void (*dsp_cm_write)(u32, s16 , u16);
+ u32 (*dsp_cm_read)(s16 , u16);
+ u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+ phys_addr_t phys_mempool_base;
+ phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/flash.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/flash.h
new file mode 100644
index 0000000..0d88499
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/flash.h
@@ -0,0 +1,17 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+struct platform_device;
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/fpga.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/fpga.h
new file mode 100644
index 0000000..bd3c632
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/fpga.h
@@ -0,0 +1,193 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+extern void omap1510_fpga_init_irq(void);
+
+#define fpga_read(reg) __raw_readb(reg)
+#define fpga_write(val, reg) __raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ * H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
+#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
+#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
+
+/* NOTE: most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+ /* offset 0x00 */
+ u16 smc91x[8];
+ /* offset 0x10 */
+ u16 fpga_rev;
+ u16 board_rev;
+ u16 gpio_outputs;
+ u16 leds;
+ /* offset 0x18 */
+ u16 misc_inputs;
+ u16 lan_status;
+ u16 lan_reset;
+ u16 reserved0;
+ /* offset 0x20 */
+ u16 ps2_data;
+ u16 ps2_ctrl;
+ /* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
+/* cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
+#define OMAP1510_FPGA_SIZE SZ_4K
+#define OMAP1510_FPGA_START 0x08000000 /* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE 0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
+#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
+#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
+#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpio-switch.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpio-switch.h
new file mode 100644
index 0000000..10da0e0
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpio-switch.h
@@ -0,0 +1,54 @@
+/*
+ * GPIO switch definitions
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
+#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
+
+#include <linux/types.h>
+
+/* Cover:
+ * high -> closed
+ * low -> open
+ * Connection:
+ * high -> connected
+ * low -> disconnected
+ * Activity:
+ * high -> active
+ * low -> inactive
+ *
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001
+#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001
+#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002
+
+struct omap_gpio_switch {
+ const char *name;
+ s16 gpio;
+ unsigned flags:4;
+ unsigned type:4;
+
+ /* Time in ms to debounce when transitioning from
+ * inactive state to active state. */
+ u16 debounce_rising;
+ /* Same for transition from active to inactive state. */
+ u16 debounce_falling;
+
+ /* notify board-specific code about state changes */
+ void (* notify)(void *data, int state);
+ void *notify_data;
+};
+
+/* Call at init time only */
+extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
+ int count);
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpio.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpio.h
new file mode 100644
index 0000000..2f6e992
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpio.h
@@ -0,0 +1,227 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+
+#define OMAP1_MPUIO_BASE 0xfffb5000
+
+/*
+ * These are the omap15xx/16xx offsets. The omap7xx offset are
+ * OMAP_MPUIO_ / 2 offsets below.
+ */
+#define OMAP_MPUIO_INPUT_LATCH 0x00
+#define OMAP_MPUIO_OUTPUT 0x04
+#define OMAP_MPUIO_IO_CNTL 0x08
+#define OMAP_MPUIO_KBR_LATCH 0x10
+#define OMAP_MPUIO_KBC 0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
+#define OMAP_MPUIO_KBD_INT 0x20
+#define OMAP_MPUIO_GPIO_INT 0x24
+#define OMAP_MPUIO_KBD_MASKIT 0x28
+#define OMAP_MPUIO_GPIO_MASKIT 0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
+#define OMAP_MPUIO_LATCH 0x34
+
+#define OMAP34XX_NR_GPIOS 6
+
+/*
+ * OMAP1510 GPIO registers
+ */
+#define OMAP1510_GPIO_DATA_INPUT 0x00
+#define OMAP1510_GPIO_DATA_OUTPUT 0x04
+#define OMAP1510_GPIO_DIR_CONTROL 0x08
+#define OMAP1510_GPIO_INT_CONTROL 0x0c
+#define OMAP1510_GPIO_INT_MASK 0x10
+#define OMAP1510_GPIO_INT_STATUS 0x14
+#define OMAP1510_GPIO_PIN_CONTROL 0x18
+
+#define OMAP1510_IH_GPIO_BASE 64
+
+/*
+ * OMAP1610 specific GPIO registers
+ */
+#define OMAP1610_GPIO_REVISION 0x0000
+#define OMAP1610_GPIO_SYSCONFIG 0x0010
+#define OMAP1610_GPIO_SYSSTATUS 0x0014
+#define OMAP1610_GPIO_IRQSTATUS1 0x0018
+#define OMAP1610_GPIO_IRQENABLE1 0x001c
+#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
+#define OMAP1610_GPIO_DATAIN 0x002c
+#define OMAP1610_GPIO_DATAOUT 0x0030
+#define OMAP1610_GPIO_DIRECTION 0x0034
+#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
+#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
+#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
+#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
+#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
+#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
+#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
+#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
+
+/*
+ * OMAP7XX specific GPIO registers
+ */
+#define OMAP7XX_GPIO_DATA_INPUT 0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
+#define OMAP7XX_GPIO_DIR_CONTROL 0x08
+#define OMAP7XX_GPIO_INT_CONTROL 0x0c
+#define OMAP7XX_GPIO_INT_MASK 0x10
+#define OMAP7XX_GPIO_INT_STATUS 0x14
+
+/*
+ * omap2+ specific GPIO registers
+ */
+#define OMAP24XX_GPIO_REVISION 0x0000
+#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
+#define OMAP24XX_GPIO_IRQENABLE2 0x002c
+#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
+#define OMAP24XX_GPIO_CTRL 0x0030
+#define OMAP24XX_GPIO_OE 0x0034
+#define OMAP24XX_GPIO_DATAIN 0x0038
+#define OMAP24XX_GPIO_DATAOUT 0x003c
+#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
+#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
+#define OMAP24XX_GPIO_RISINGDETECT 0x0048
+#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
+#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
+#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
+#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
+#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
+#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
+#define OMAP24XX_GPIO_SETWKUENA 0x0084
+#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
+#define OMAP24XX_GPIO_SETDATAOUT 0x0094
+
+#define OMAP4_GPIO_REVISION 0x0000
+#define OMAP4_GPIO_EOI 0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
+#define OMAP4_GPIO_IRQSTATUS0 0x002c
+#define OMAP4_GPIO_IRQSTATUS1 0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
+#define OMAP4_GPIO_IRQWAKEN0 0x0044
+#define OMAP4_GPIO_IRQWAKEN1 0x0048
+#define OMAP4_GPIO_IRQENABLE1 0x011c
+#define OMAP4_GPIO_WAKE_EN 0x0120
+#define OMAP4_GPIO_IRQSTATUS2 0x0128
+#define OMAP4_GPIO_IRQENABLE2 0x012c
+#define OMAP4_GPIO_CTRL 0x0130
+#define OMAP4_GPIO_OE 0x0134
+#define OMAP4_GPIO_DATAIN 0x0138
+#define OMAP4_GPIO_DATAOUT 0x013c
+#define OMAP4_GPIO_LEVELDETECT0 0x0140
+#define OMAP4_GPIO_LEVELDETECT1 0x0144
+#define OMAP4_GPIO_RISINGDETECT 0x0148
+#define OMAP4_GPIO_FALLINGDETECT 0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP4_GPIO_SETIRQENABLE1 0x0164
+#define OMAP4_GPIO_CLEARWKUENA 0x0180
+#define OMAP4_GPIO_SETWKUENA 0x0184
+#define OMAP4_GPIO_CLEARDATAOUT 0x0190
+#define OMAP4_GPIO_SETDATAOUT 0x0194
+
+#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
+
+struct omap_gpio_dev_attr {
+ int bank_width; /* GPIO bank width */
+ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+};
+
+struct omap_gpio_reg_offs {
+ u16 revision;
+ u16 direction;
+ u16 datain;
+ u16 dataout;
+ u16 set_dataout;
+ u16 clr_dataout;
+ u16 irqstatus;
+ u16 irqstatus2;
+ u16 irqenable;
+ u16 irqenable2;
+ u16 set_irqenable;
+ u16 clr_irqenable;
+ u16 debounce;
+ u16 debounce_en;
+ u16 ctrl;
+ u16 wkup_en;
+ u16 leveldetect0;
+ u16 leveldetect1;
+ u16 risingdetect;
+ u16 fallingdetect;
+ u16 irqctrl;
+ u16 edgectrl1;
+ u16 edgectrl2;
+ u16 pinctrl;
+
+ bool irqenable_inv;
+};
+
+struct omap_gpio_platform_data {
+ u16 virtual_irq_start;
+ int bank_type;
+ int bank_width; /* GPIO bank width */
+ int bank_stride; /* Only needed for omap1 MPUIO */
+ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+ bool loses_context; /* whether the bank would ever lose context */
+ bool is_mpuio; /* whether the bank is of type MPUIO */
+ u32 non_wakeup_gpios;
+
+ struct omap_gpio_reg_offs *regs;
+
+ /* Return context loss count due to PM states changing */
+ int (*get_context_loss_count)(struct device *dev);
+};
+
+extern void omap2_gpio_prepare_for_idle(int off_mode);
+extern void omap2_gpio_resume_after_idle(void);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ *
+ * The original OMAP-specific calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
new file mode 100644
index 0000000..b64fbee
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96 (1 << 4)
+#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+ int cs;
+ int gpio_irq;
+ int gpio_pwrdwn;
+ int gpio_reset;
+ int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
+ u32 flags;
+ int (*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+ defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
new file mode 100644
index 0000000..ea6c9c8
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+ *
+ * Copyright (C) 2009 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
+
+struct omap_smsc911x_platform_data {
+ int id;
+ int cs;
+ int gpio_irq;
+ int gpio_reset;
+ u32 flags;
+};
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
+
+#else
+
+static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc.h
new file mode 100644
index 0000000..1527929
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/gpmc.h
@@ -0,0 +1,160 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM 8
+
+#define GPMC_CS_CONFIG1 0x00
+#define GPMC_CS_CONFIG2 0x04
+#define GPMC_CS_CONFIG3 0x08
+#define GPMC_CS_CONFIG4 0x0c
+#define GPMC_CS_CONFIG5 0x10
+#define GPMC_CS_CONFIG6 0x14
+#define GPMC_CS_CONFIG7 0x18
+#define GPMC_CS_NAND_COMMAND 0x1c
+#define GPMC_CS_NAND_ADDRESS 0x20
+#define GPMC_CS_NAND_DATA 0x24
+
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY 0x00000001
+#define GPMC_CONFIG_DEV_SIZE 0x00000002
+#define GPMC_CONFIG_DEV_TYPE 0x00000003
+#define GPMC_SET_IRQ_STATUS 0x00000004
+#define GPMC_CONFIG_WP 0x00000005
+
+#define GPMC_GET_IRQ_STATUS 0x00000006
+#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */
+#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/
+#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */
+
+#define GPMC_NAND_COMMAND 0x0000000a
+#define GPMC_NAND_ADDRESS 0x0000000b
+#define GPMC_NAND_DATA 0x0000000c
+
+#define GPMC_ENABLE_IRQ 0x0000000d
+
+/* ECC commands */
+#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID (1 << 6)
+
+#define GPMC_DEVICETYPE_NOR 0
+#define GPMC_DEVICETYPE_NAND 2
+#define GPMC_CONFIG_WRITEPROTECT 0x00000010
+#define GPMC_STATUS_BUFF_EMPTY 0x00000001
+#define WR_RD_PIN_MONITORING 0x00600000
+#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define GPMC_IRQ_FIFOEVENTENABLE 0x01
+#define GPMC_IRQ_COUNT_EVENT 0x02
+
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+
+enum omap_ecc {
+ /* 1-bit ecc: stored at end of spare area */
+ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+ /* 1-bit ecc: stored at beginning of spare area as romcode */
+ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+ /* Minimum clock period for synchronous mode (in picoseconds) */
+ u32 sync_clk;
+
+ /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+ u16 cs_on; /* Assertion time */
+ u16 cs_rd_off; /* Read deassertion time */
+ u16 cs_wr_off; /* Write deassertion time */
+
+ /* ADV signal timings corresponding to GPMC_CONFIG3 */
+ u16 adv_on; /* Assertion time */
+ u16 adv_rd_off; /* Read deassertion time */
+ u16 adv_wr_off; /* Write deassertion time */
+
+ /* WE signals timings corresponding to GPMC_CONFIG4 */
+ u16 we_on; /* WE assertion time */
+ u16 we_off; /* WE deassertion time */
+
+ /* OE signals timings corresponding to GPMC_CONFIG4 */
+ u16 oe_on; /* OE assertion time */
+ u16 oe_off; /* OE deassertion time */
+
+ /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+ u16 page_burst_access; /* Multiple access word delay */
+ u16 access; /* Start-cycle to first data valid delay */
+ u16 rd_cycle; /* Total read cycle time */
+ u16 wr_cycle; /* Total write cycle time */
+
+ /* The following are only on OMAP3430 */
+ u16 wr_access; /* WRACCESSTIME */
+ u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
+extern unsigned long gpmc_get_fclk_period(void);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_cs_set_reserved(int cs, int reserved);
+extern int gpmc_cs_reserved(int cs);
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
+ unsigned int u32_count, int is_write);
+extern int gpmc_prefetch_reset(int cs);
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
+extern int gpmc_read_status(int cmd);
+extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_nand_read(int cs, int cmd);
+extern int gpmc_nand_write(int cs, int cmd, int wval);
+
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/hardware.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/hardware.h
new file mode 100644
index 0000000..e897978
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/hardware.h
@@ -0,0 +1,292 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ * file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ * and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+#endif
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ * files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE (0xfffec500)
+#define OMAP_MPU_TIMER2_BASE (0xfffec600)
+#define OMAP_MPU_TIMER3_BASE (0xfffec700)
+#define MPU_TIMER_FREE (1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
+#define MPU_TIMER_AR (1 << 1)
+#define MPU_TIMER_ST (1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE (0xfffece00)
+#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF 1
+#define CK_IDLEF 2
+#define CK_ENABLEF 4
+#define CK_SELECTF 8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL (0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
+#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE (0xfffe0800)
+#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
+# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
+# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
+# define SOFT_UDC_REQ (1 << 4)
+# define SOFT_USB_CLK_REQ (1 << 3)
+# define SOFT_DPLL_REQ (1 << 0)
+#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
+# define DIS_MMC2_DPLL_REQ (1 << 11)
+# define DIS_MMC1_DPLL_REQ (1 << 10)
+# define DIS_UART3_DPLL_REQ (1 << 9)
+# define DIS_UART2_DPLL_REQ (1 << 8)
+# define DIS_UART1_DPLL_REQ (1 << 7)
+# define DIS_USB_HOST_DPLL_REQ (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
+#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE 0xfffecb00
+#define OMAP_IH2_BASE 0xfffe0000
+
+#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET 0x00
+#define IRQ_MIR_REG_OFFSET 0x04
+#define IRQ_SIR_IRQ_REG_OFFSET 0x10
+#define IRQ_SIR_FIQ_REG_OFFSET 0x14
+#define IRQ_CONTROL_REG_OFFSET 0x18
+#define IRQ_ISR_REG_OFFSET 0x9c
+#define IRQ_ILR0_REG_OFFSET 0x1c
+#define IRQ_GMR_REG_OFFSET 0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0 0xfffe1080
+#define MOD_CONF_CTRL_1 0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0 0xfffe1000
+#define FUNC_MUX_CTRL_1 0xfffe1004
+#define FUNC_MUX_CTRL_2 0xfffe1008
+#define COMP_MODE_CTRL_0 0xfffe100c
+#define FUNC_MUX_CTRL_3 0xfffe1010
+#define FUNC_MUX_CTRL_4 0xfffe1014
+#define FUNC_MUX_CTRL_5 0xfffe1018
+#define FUNC_MUX_CTRL_6 0xfffe101C
+#define FUNC_MUX_CTRL_7 0xfffe1020
+#define FUNC_MUX_CTRL_8 0xfffe1024
+#define FUNC_MUX_CTRL_9 0xfffe1028
+#define FUNC_MUX_CTRL_A 0xfffe102C
+#define FUNC_MUX_CTRL_B 0xfffe1030
+#define FUNC_MUX_CTRL_C 0xfffe1034
+#define FUNC_MUX_CTRL_D 0xfffe1038
+#define PULL_DWN_CTRL_0 0xfffe1040
+#define PULL_DWN_CTRL_1 0xfffe1044
+#define PULL_DWN_CTRL_2 0xfffe1048
+#define PULL_DWN_CTRL_3 0xfffe104c
+#define PULL_DWN_CTRL_4 0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E 0xfffe1090
+#define FUNC_MUX_CTRL_F 0xfffe1094
+#define FUNC_MUX_CTRL_10 0xfffe1098
+#define FUNC_MUX_CTRL_11 0xfffe109c
+#define FUNC_MUX_CTRL_12 0xfffe10a0
+#define PU_PD_SEL_0 0xfffe10b4
+#define PU_PD_SEL_1 0xfffe10b8
+#define PU_PD_SEL_2 0xfffe10bc
+#define PU_PD_SEL_3 0xfffe10c0
+#define PU_PD_SEL_4 0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE 0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE (0xfffec900)
+#define MPUI_CTRL (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE 0xfffbd000
+#define OMAP_LPG2_BASE 0xfffbd800
+#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE 0xfffb5800
+#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
+#include <plat/ti81xx.h>
+#include <plat/am33xx.h>
+
+#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/i2c.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/i2c.h
new file mode 100644
index 0000000..7c22b9e
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/i2c.h
@@ -0,0 +1,59 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#ifndef __ASM__ARCH_OMAP_I2C_H
+#define __ASM__ARCH_OMAP_I2C_H
+
+#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ return 0;
+}
+#endif
+
+/**
+ * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
+ * @fifo_depth: total controller FIFO size (in bytes)
+ * @flags: differences in hardware support capability
+ *
+ * @fifo_depth represents what exists on the hardware, not what is
+ * actually configured at runtime by the device driver.
+ */
+struct omap_i2c_dev_attr {
+ u8 fifo_depth;
+ u32 flags;
+};
+
+void __init omap1_i2c_mux_pins(int bus_id);
+void __init omap2_i2c_mux_pins(int bus_id);
+
+struct omap_hwmod;
+int omap_i2c_reset(struct omap_hwmod *oh);
+
+#endif /* __ASM__ARCH_OMAP_I2C_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iommu.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iommu.h
new file mode 100644
index 0000000..88be3e6
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iommu.h
@@ -0,0 +1,206 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+ u32 da;
+ u32 pa;
+ u32 pgsz, prsvd, valid;
+ union {
+ u16 ap;
+ struct {
+ u32 endian, elsz, mixed;
+ };
+ };
+};
+
+struct omap_iommu {
+ const char *name;
+ struct module *owner;
+ struct clk *clk;
+ void __iomem *regbase;
+ struct device *dev;
+ void *isr_priv;
+ struct iommu_domain *domain;
+
+ unsigned int refcount;
+ spinlock_t iommu_lock; /* global for this whole object */
+
+ /*
+ * We don't change iopgd for a situation like pgd for a task,
+ * but share it globally for each iommu.
+ */
+ u32 *iopgd;
+ spinlock_t page_table_lock; /* protect iopgd */
+
+ int nr_tlb_entries;
+
+ struct list_head mmap;
+ struct mutex mmap_lock; /* protect mmap */
+
+ void *ctx; /* iommu context: registres saved area */
+ u32 da_start;
+ u32 da_end;
+};
+
+struct cr_regs {
+ union {
+ struct {
+ u16 cam_l;
+ u16 cam_h;
+ };
+ u32 cam;
+ };
+ union {
+ struct {
+ u16 ram_l;
+ u16 ram_h;
+ };
+ u32 ram;
+ };
+};
+
+struct iotlb_lock {
+ short base;
+ short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+ unsigned long version;
+
+ int (*enable)(struct omap_iommu *obj);
+ void (*disable)(struct omap_iommu *obj);
+ void (*set_twl)(struct omap_iommu *obj, bool on);
+ u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra);
+
+ void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr);
+ void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr);
+
+ struct cr_regs *(*alloc_cr)(struct omap_iommu *obj,
+ struct iotlb_entry *e);
+ int (*cr_valid)(struct cr_regs *cr);
+ u32 (*cr_to_virt)(struct cr_regs *cr);
+ void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+ ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr,
+ char *buf);
+
+ u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+ void (*save_ctx)(struct omap_iommu *obj);
+ void (*restore_ctx)(struct omap_iommu *obj);
+ ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
+};
+
+struct iommu_platform_data {
+ const char *name;
+ const char *clk_name;
+ const int nr_tlb_entries;
+ u32 da_start;
+ u32 da_end;
+};
+
+/**
+ * struct iommu_arch_data - omap iommu private data
+ * @name: name of the iommu device
+ * @iommu_dev: handle of the iommu device
+ *
+ * This is an omap iommu private data object, which binds an iommu user
+ * to its iommu device. This object should be placed at the iommu user's
+ * dev_archdata so generic IOMMU API can be used without having to
+ * utilize omap-specific plumbing anymore.
+ */
+struct omap_iommu_arch_data {
+ const char *name;
+ struct omap_iommu *iommu_dev;
+};
+
+/**
+ * dev_to_omap_iommu() - retrieves an omap iommu object from a user device
+ * @dev: iommu client device
+ */
+static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
+{
+ struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
+
+ return arch_data->iommu_dev;
+}
+
+/* IOMMU errors */
+#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
+#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1)
+#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2)
+#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3)
+#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4)
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <plat/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes) \
+ (((bytes) >= SZ_16M) ? SZ_16M : \
+ ((bytes) >= SZ_1M) ? SZ_1M : \
+ ((bytes) >= SZ_64K) ? SZ_64K : \
+ ((bytes) >= SZ_4K) ? SZ_4K : 0)
+
+#define bytes_to_iopgsz(bytes) \
+ (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \
+ ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \
+ ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \
+ ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1)
+
+#define iopgsz_to_bytes(iopgsz) \
+ (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \
+ ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \
+ ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \
+ ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 omap_iommu_arch_version(void);
+
+extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+
+extern int
+omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e);
+
+extern int omap_iommu_set_isr(const char *name,
+ int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs,
+ void *priv),
+ void *isr_priv);
+
+extern void omap_iommu_save_ctx(struct device *dev);
+extern void omap_iommu_restore_ctx(struct device *dev);
+
+extern int omap_install_iommu_arch(const struct iommu_functions *ops);
+extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int omap_foreach_iommu_device(void *data,
+ int (*fn)(struct device *, void *));
+
+extern ssize_t
+omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
+extern size_t
+omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iommu2.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iommu2.h
new file mode 100644
index 0000000..d4116b5
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION 0x00
+#define MMU_SYSCONFIG 0x10
+#define MMU_SYSSTATUS 0x14
+#define MMU_IRQSTATUS 0x18
+#define MMU_IRQENABLE 0x1c
+#define MMU_WALKING_ST 0x40
+#define MMU_CNTL 0x44
+#define MMU_FAULT_AD 0x48
+#define MMU_TTB 0x4c
+#define MMU_LOCK 0x50
+#define MMU_LD_TLB 0x54
+#define MMU_CAM 0x58
+#define MMU_RAM 0x5c
+#define MMU_GFLUSH 0x60
+#define MMU_FLUSH_ENTRY 0x64
+#define MMU_READ_CAM 0x68
+#define MMU_READ_RAM 0x6c
+#define MMU_EMU_FAULT_AD 0x70
+
+#define MMU_REG_SIZE 256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT 10
+#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x) \
+ ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT 4
+#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x) \
+ ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT 12
+#define MMU_CAM_VATAG_MASK \
+ ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P (1 << 3)
+#define MMU_CAM_V (1 << 2)
+#define MMU_CAM_PGSZ_MASK 3
+#define MMU_CAM_PGSZ_1M (0 << 0)
+#define MMU_CAM_PGSZ_64K (1 << 0)
+#define MMU_CAM_PGSZ_4K (2 << 0)
+#define MMU_CAM_PGSZ_16M (3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT 12
+#define MMU_RAM_PADDR_MASK \
+ ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT 9
+#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT 7
+#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT 6
+#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
+{
+ return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
+{
+ __raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iopgtable.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iopgtable.h
new file mode 100644
index 0000000..66a8139
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iopgtable.h
@@ -0,0 +1,120 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+/*
+ * "L2 table" address mask and size definitions.
+ */
+#define IOPGD_SHIFT 20
+#define IOPGD_SIZE (1UL << IOPGD_SHIFT)
+#define IOPGD_MASK (~(IOPGD_SIZE - 1))
+
+/*
+ * "section" address mask and size definitions.
+ */
+#define IOSECTION_SHIFT 20
+#define IOSECTION_SIZE (1UL << IOSECTION_SHIFT)
+#define IOSECTION_MASK (~(IOSECTION_SIZE - 1))
+
+/*
+ * "supersection" address mask and size definitions.
+ */
+#define IOSUPER_SHIFT 24
+#define IOSUPER_SIZE (1UL << IOSUPER_SHIFT)
+#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
+
+#define PTRS_PER_IOPGD (1UL << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
+
+/*
+ * "small page" address mask and size definitions.
+ */
+#define IOPTE_SHIFT 12
+#define IOPTE_SIZE (1UL << IOPTE_SHIFT)
+#define IOPTE_MASK (~(IOPTE_SIZE - 1))
+
+/*
+ * "large page" address mask and size definitions.
+ */
+#define IOLARGE_SHIFT 16
+#define IOLARGE_SIZE (1UL << IOLARGE_SHIFT)
+#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
+
+#define PTRS_PER_IOPTE (1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOPAGE_MASK IOPTE_MASK
+
+/**
+ * omap_iommu_translate() - va to pa translation
+ * @d: omap iommu descriptor
+ * @va: virtual address
+ * @mask: omap iommu descriptor mask
+ *
+ * va to pa translation
+ */
+static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask)
+{
+ return (d & mask) | (va & (~mask));
+}
+
+/*
+ * some descriptor attributes.
+ */
+#define IOPGD_TABLE (1 << 0)
+#define IOPGD_SECTION (2 << 0)
+#define IOPGD_SUPER (1 << 18 | 2 << 0)
+
+#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE)
+#define iopgd_is_section(x) (((x) & (1 << 18 | 3)) == IOPGD_SECTION)
+#define iopgd_is_super(x) (((x) & (1 << 18 | 3)) == IOPGD_SUPER)
+
+#define IOPTE_SMALL (2 << 0)
+#define IOPTE_LARGE (1 << 0)
+
+#define iopte_is_small(x) (((x) & 2) == IOPTE_SMALL)
+#define iopte_is_large(x) (((x) & 3) == IOPTE_LARGE)
+
+/* to find an entry in a page-table-directory */
+#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da))
+
+#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
+#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
+
+/* to find an entry in the second-level page table. */
+#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+ u32 flags)
+{
+ memset(e, 0, sizeof(*e));
+
+ e->da = da;
+ e->pa = pa;
+ e->valid = 1;
+ /* FIXME: add OMAP1 support */
+ e->pgsz = flags & MMU_CAM_PGSZ_MASK;
+ e->endian = flags & MMU_RAM_ENDIAN_MASK;
+ e->elsz = flags & MMU_RAM_ELSZ_MASK;
+ e->mixed = flags & MMU_RAM_MIXED_MASK;
+
+ return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev) \
+ (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iovmm.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iovmm.h
new file mode 100644
index 0000000..498e57c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/iovmm.h
@@ -0,0 +1,89 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+#include <linux/iommu.h>
+
+struct iovm_struct {
+ struct omap_iommu *iommu; /* iommu object which this belongs to */
+ u32 da_start; /* area definition */
+ u32 da_end;
+ u32 flags; /* IOVMF_: see below */
+ struct list_head list; /* linked in ascending order */
+ const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */
+ void *va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT 16
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK (~((1 << 10) - 1))
+#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK (3 << 0)
+#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK (1 << 9)
+#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK (3 << 7)
+#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK (1 << 6)
+#define IOVMF_MIXED MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
+extern u32
+omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da,
+ const struct sg_table *sgt, u32 flags);
+extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
+ struct device *dev, u32 da);
+extern u32
+omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev,
+ u32 da, size_t bytes, u32 flags);
+extern void
+omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
+ const u32 da);
+extern void *omap_da_to_va(struct device *dev, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irda.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irda.h
new file mode 100644
index 0000000..40f6033
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irda.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/irda.h
+ *
+ * Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL 1 /* Selects IrDA */
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+#define IR_MIRMODE 8
+
+struct omap_irda_config {
+ int transceiver_cap;
+ int (*transceiver_mode)(struct device *dev, int mode);
+ int (*select_irda)(struct device *dev, int state);
+ int rx_channel;
+ int tx_channel;
+ unsigned long dest_start;
+ unsigned long src_start;
+ int tx_trigger;
+ int rx_trigger;
+ int mode;
+};
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irqs-44xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irqs-44xx.h
new file mode 100644
index 0000000..518322c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irqs-44xx.h
@@ -0,0 +1,144 @@
+/*
+ * OMAP4 Interrupt lines definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+
+/* OMAP44XX IRQs numbers definitions */
+#define OMAP44XX_IRQ_LOCALTIMER 29
+#define OMAP44XX_IRQ_LOCALWDT 30
+
+#define OMAP44XX_IRQ_GIC_START 32
+
+#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START)
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irqs.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irqs.h
new file mode 100644
index 0000000..37bbbbb
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/irqs.h
@@ -0,0 +1,453 @@
+/*
+ * arch/arm/plat-omap/include/mach/irqs.h
+ *
+ * Copyright (C) Greg Lonnon 2001
+ * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ * are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/* All OMAP4 specific defines are moved to irqs-44xx.h */
+#include "irqs-44xx.h"
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA 1
+#define INT_FIQ 3
+#define INT_RTDX 6
+#define INT_DSP_MMU_ABORT 7
+#define INT_HOST 8
+#define INT_ABORT 9
+#define INT_BRIDGE_PRIV 13
+#define INT_GPIO_BANK1 14
+#define INT_UART3 15
+#define INT_TIMER3 16
+#define INT_DMA_CH0_6 19
+#define INT_DMA_CH1_7 20
+#define INT_DMA_CH2_8 21
+#define INT_DMA_CH3 22
+#define INT_DMA_CH4 23
+#define INT_DMA_CH5 24
+#define INT_DMA_LCD 25
+#define INT_TIMER1 26
+#define INT_WD_TIMER 27
+#define INT_BRIDGE_PUB 28
+#define INT_TIMER2 30
+#define INT_LCD_CTRL 31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ 0
+#define INT_1510_RES2 2
+#define INT_1510_SPI_TX 4
+#define INT_1510_SPI_RX 5
+#define INT_1510_DSP_MAILBOX1 10
+#define INT_1510_DSP_MAILBOX2 11
+#define INT_1510_RES12 12
+#define INT_1510_LB_MMU 17
+#define INT_1510_RES18 18
+#define INT_1510_LOCAL_BUS 29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ 2
+#define INT_1610_McBSP2_TX 4
+#define INT_1610_McBSP2_RX 5
+#define INT_1610_DSP_MAILBOX1 10
+#define INT_1610_DSP_MAILBOX2 11
+#define INT_1610_LCD_LINE 12
+#define INT_1610_GPTIMER1 17
+#define INT_1610_GPTIMER2 18
+#define INT_1610_SSR_FIFO_0 29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ 0
+#define INT_7XX_IH2_IRQ 1
+#define INT_7XX_USB_NON_ISO 2
+#define INT_7XX_USB_ISO 3
+#define INT_7XX_ICR 4
+#define INT_7XX_EAC 5
+#define INT_7XX_GPIO_BANK1 6
+#define INT_7XX_GPIO_BANK2 7
+#define INT_7XX_GPIO_BANK3 8
+#define INT_7XX_McBSP2TX 10
+#define INT_7XX_McBSP2RX 11
+#define INT_7XX_McBSP2RX_OVF 12
+#define INT_7XX_LCD_LINE 14
+#define INT_7XX_GSM_PROTECT 15
+#define INT_7XX_TIMER3 16
+#define INT_7XX_GPIO_BANK5 17
+#define INT_7XX_GPIO_BANK6 18
+#define INT_7XX_SPGIO_WR 29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE 32
+
+#define INT_KEYBOARD (1 + IH2_BASE)
+#define INT_uWireTX (2 + IH2_BASE)
+#define INT_uWireRX (3 + IH2_BASE)
+#define INT_I2C (4 + IH2_BASE)
+#define INT_MPUIO (5 + IH2_BASE)
+#define INT_USB_HHC_1 (6 + IH2_BASE)
+#define INT_McBSP3TX (10 + IH2_BASE)
+#define INT_McBSP3RX (11 + IH2_BASE)
+#define INT_McBSP1TX (12 + IH2_BASE)
+#define INT_McBSP1RX (13 + IH2_BASE)
+#define INT_UART1 (14 + IH2_BASE)
+#define INT_UART2 (15 + IH2_BASE)
+#define INT_BT_MCSI1TX (16 + IH2_BASE)
+#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
+#define INT_USB_W2FC (20 + IH2_BASE)
+#define INT_1WIRE (21 + IH2_BASE)
+#define INT_OS_TIMER (22 + IH2_BASE)
+#define INT_MMC (23 + IH2_BASE)
+#define INT_GAUGE_32K (24 + IH2_BASE)
+#define INT_RTC_TIMER (25 + IH2_BASE)
+#define INT_RTC_ALARM (26 + IH2_BASE)
+#define INT_MEM_STICK (27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
+#define INT_1610_USB_OTG (8 + IH2_BASE)
+#define INT_1610_SoSSI (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
+#define INT_1610_DSP_MMU (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
+#define INT_1610_STI (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
+#define INT_1610_GPTIMER3 (34 + IH2_BASE)
+#define INT_1610_GPTIMER4 (35 + IH2_BASE)
+#define INT_1610_GPTIMER5 (36 + IH2_BASE)
+#define INT_1610_GPTIMER6 (37 + IH2_BASE)
+#define INT_1610_GPTIMER7 (38 + IH2_BASE)
+#define INT_1610_GPTIMER8 (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
+#define INT_1610_MMC2 (42 + IH2_BASE)
+#define INT_1610_CF (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
+#define INT_1610_SPI (49 + IH2_BASE)
+#define INT_1610_DMA_CH6 (53 + IH2_BASE)
+#define INT_1610_DMA_CH7 (54 + IH2_BASE)
+#define INT_1610_DMA_CH8 (55 + IH2_BASE)
+#define INT_1610_DMA_CH9 (56 + IH2_BASE)
+#define INT_1610_DMA_CH10 (57 + IH2_BASE)
+#define INT_1610_DMA_CH11 (58 + IH2_BASE)
+#define INT_1610_DMA_CH12 (59 + IH2_BASE)
+#define INT_1610_DMA_CH13 (60 + IH2_BASE)
+#define INT_1610_DMA_CH14 (61 + IH2_BASE)
+#define INT_1610_DMA_CH15 (62 + IH2_BASE)
+#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_7XX_CFCD (2 + IH2_BASE)
+#define INT_7XX_CFIREQ (3 + IH2_BASE)
+#define INT_7XX_I2C (4 + IH2_BASE)
+#define INT_7XX_PCC (5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
+#define INT_7XX_VLYNQ (9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_7XX_McBSP1TX (11 + IH2_BASE)
+#define INT_7XX_McBSP1RX (12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_7XX_MCSI (16 + IH2_BASE)
+#define INT_7XX_uWireTX (17 + IH2_BASE)
+#define INT_7XX_uWireRX (18 + IH2_BASE)
+#define INT_7XX_SMC_CD (19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_7XX_TIMER32K (22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
+#define INT_7XX_UPLD (24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
+#define INT_7XX_USB_GENI (29 + IH2_BASE)
+#define INT_7XX_USB_OTG (30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
+#define INT_7XX_RNG (32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
+#define INT_7XX_MPUIO (39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
+#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
+#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
+#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
+#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
+#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
+#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
+#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
+#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
+#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
+#define INT_7XX_NAND (63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ 7
+#define INT_24XX_SDMA_IRQ0 12
+#define INT_24XX_SDMA_IRQ1 13
+#define INT_24XX_SDMA_IRQ2 14
+#define INT_24XX_SDMA_IRQ3 15
+#define INT_24XX_CAM_IRQ 24
+#define INT_24XX_DSS_IRQ 25
+#define INT_24XX_MAIL_U0_MPU 26
+#define INT_24XX_DSP_UMA 27
+#define INT_24XX_DSP_MMU 28
+#define INT_24XX_GPIO_BANK1 29
+#define INT_24XX_GPIO_BANK2 30
+#define INT_24XX_GPIO_BANK3 31
+#define INT_24XX_GPIO_BANK4 32
+#define INT_24XX_GPIO_BANK5 33
+#define INT_24XX_MAIL_U3_MPU 34
+#define INT_24XX_GPTIMER1 37
+#define INT_24XX_GPTIMER2 38
+#define INT_24XX_GPTIMER3 39
+#define INT_24XX_GPTIMER4 40
+#define INT_24XX_GPTIMER5 41
+#define INT_24XX_GPTIMER6 42
+#define INT_24XX_GPTIMER7 43
+#define INT_24XX_GPTIMER8 44
+#define INT_24XX_GPTIMER9 45
+#define INT_24XX_GPTIMER10 46
+#define INT_24XX_GPTIMER11 47
+#define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
+#define INT_24XX_MCBSP4_IRQ_TX 54
+#define INT_24XX_MCBSP4_IRQ_RX 55
+#define INT_24XX_I2C1_IRQ 56
+#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
+#define INT_24XX_MCBSP1_IRQ_TX 59
+#define INT_24XX_MCBSP1_IRQ_RX 60
+#define INT_24XX_MCBSP2_IRQ_TX 62
+#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
+#define INT_24XX_UART1_IRQ 72
+#define INT_24XX_UART2_IRQ 73
+#define INT_24XX_UART3_IRQ 74
+#define INT_24XX_USB_IRQ_GEN 75
+#define INT_24XX_USB_IRQ_NISO 76
+#define INT_24XX_USB_IRQ_ISO 77
+#define INT_24XX_USB_IRQ_HGEN 78
+#define INT_24XX_USB_IRQ_HSOF 79
+#define INT_24XX_USB_IRQ_OTG 80
+#define INT_24XX_MCBSP5_IRQ_TX 81
+#define INT_24XX_MCBSP5_IRQ_RX 82
+#define INT_24XX_MMC_IRQ 83
+#define INT_24XX_MMC2_IRQ 86
+#define INT_24XX_MCBSP3_IRQ_TX 89
+#define INT_24XX_MCBSP3_IRQ_RX 90
+#define INT_24XX_SPI3_IRQ 91
+
+#define INT_243X_MCBSP2_IRQ 16
+#define INT_243X_MCBSP3_IRQ 17
+#define INT_243X_MCBSP4_IRQ 18
+#define INT_243X_MCBSP5_IRQ 19
+#define INT_243X_MCBSP1_IRQ 64
+#define INT_243X_HS_USB_MC 92
+#define INT_243X_HS_USB_DMA 93
+#define INT_243X_CARKIT_IRQ 94
+
+#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_34XX_ST_MCBSP2_IRQ 4
+#define INT_34XX_ST_MCBSP3_IRQ 5
+#define INT_34XX_SSM_ABORT_IRQ 6
+#define INT_34XX_SYS_NIRQ 7
+#define INT_34XX_D2D_FW_IRQ 8
+#define INT_34XX_L3_DBG_IRQ 9
+#define INT_34XX_L3_APP_IRQ 10
+#define INT_34XX_PRCM_MPU_IRQ 11
+#define INT_34XX_MCBSP1_IRQ 16
+#define INT_34XX_MCBSP2_IRQ 17
+#define INT_34XX_GPMC_IRQ 20
+#define INT_34XX_MCBSP3_IRQ 22
+#define INT_34XX_MCBSP4_IRQ 23
+#define INT_34XX_CAM_IRQ 24
+#define INT_34XX_MCBSP5_IRQ 27
+#define INT_34XX_GPIO_BANK1 29
+#define INT_34XX_GPIO_BANK2 30
+#define INT_34XX_GPIO_BANK3 31
+#define INT_34XX_GPIO_BANK4 32
+#define INT_34XX_GPIO_BANK5 33
+#define INT_34XX_GPIO_BANK6 34
+#define INT_34XX_USIM_IRQ 35
+#define INT_34XX_WDT3_IRQ 36
+#define INT_34XX_SPI4_IRQ 48
+#define INT_34XX_SHA1MD52_IRQ 49
+#define INT_34XX_FPKA_READY_IRQ 50
+#define INT_34XX_SHA1MD51_IRQ 51
+#define INT_34XX_RNG_IRQ 52
+#define INT_34XX_I2C3_IRQ 61
+#define INT_34XX_FPKA_ERROR_IRQ 64
+#define INT_34XX_PBIAS_IRQ 75
+#define INT_34XX_OHCI_IRQ 76
+#define INT_34XX_EHCI_IRQ 77
+#define INT_34XX_TLL_IRQ 78
+#define INT_34XX_PARTHASH_IRQ 79
+#define INT_34XX_MMC3_IRQ 94
+#define INT_34XX_GPT12_IRQ 95
+
+#define INT_36XX_UART4_IRQ 80
+
+#define INT_35XX_HECC0_IRQ 24
+#define INT_35XX_HECC1_IRQ 28
+#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
+#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68
+#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
+#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
+#define INT_35XX_USBOTG_IRQ 71
+#define INT_35XX_UART4_IRQ 84
+#define INT_35XX_CCDC_VD0_IRQ 88
+#define INT_35XX_CCDC_VD1_IRQ 92
+#define INT_35XX_CCDC_VD2_IRQ 93
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES 192
+#define IH_GPIO_BASE (128 + IH2_BASE)
+#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS 24
+#else
+#define OMAP_FPGA_NR_IRQS 0
+#endif
+#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define TWL4030_BASE_NR_IRQS 8
+#define TWL4030_PWR_NR_IRQS 8
+#else
+#define TWL4030_BASE_NR_IRQS 0
+#define TWL4030_PWR_NR_IRQS 0
+#endif
+#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END
+#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
+#ifdef CONFIG_GPIO_TWL4030
+#define TWL4030_GPIO_NR_IRQS 18
+#else
+#define TWL4030_GPIO_NR_IRQS 0
+#endif
+#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define TWL6030_BASE_NR_IRQS 20
+#else
+#define TWL6030_BASE_NR_IRQS 0
+#endif
+#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
+
+#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END
+#ifdef CONFIG_TWL6040_CODEC
+#define TWL6040_CODEC_NR_IRQS 6
+#else
+#define TWL6040_CODEC_NR_IRQS 0
+#endif
+#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
+#define TWL_IRQ_END TWL4030_GPIO_IRQ_END
+#else
+#define TWL_IRQ_END TWL6040_CODEC_IRQ_END
+#endif
+
+/* GPMC related */
+#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END)
+#define OMAP_GPMC_NR_IRQS 8
+#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS 64
+#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
+#endif
+
+#define NR_IRQS OMAP_PRCM_IRQ_END
+
+#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
+
+#define INTCPS_NR_MIR_REGS 3
+#define INTCPS_NR_IRQS 96
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START 1024
+#endif
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/keypad.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/keypad.h
new file mode 100644
index 0000000..a6b21ed
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/keypad.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-omap/include/mach/keypad.h
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#define omap_readw(reg) 0
+#define omap_writew(val, reg) do {} while (0)
+#endif
+#include <linux/input/matrix_keypad.h>
+
+struct omap_kp_platform_data {
+ int rows;
+ int cols;
+ const struct matrix_keymap_data *keymap_data;
+ bool rep;
+ unsigned long delay;
+ bool dbounce;
+ /* specific to OMAP242x*/
+ unsigned int *row_gpios;
+ unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT 14
+#define GROUP_0 (0 << GROUP_SHIFT)
+#define GROUP_1 (1 << GROUP_SHIFT)
+#define GROUP_2 (2 << GROUP_SHIFT)
+#define GROUP_3 (3 << GROUP_SHIFT)
+#define GROUP_MASK GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
+
+
+#endif
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l3_2xxx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l3_2xxx.h
new file mode 100644
index 0000000..b8b5641
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l3_2xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+
+/* L3 CONNIDs */
+/* Display Sub system (DSS) */
+#define OMAP2_L3_CORE_FW_CONNID_DSS 8
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l3_3xxx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l3_3xxx.h
new file mode 100644
index 0000000..cde1938
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l3_3xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+
+/* L3 Initiator IDs */
+/* Display Sub system (DSS) */
+#define OMAP3_L3_CORE_FW_INIT_ID_DSS 29
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l4_2xxx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l4_2xxx.h
new file mode 100644
index 0000000..3f39cf8
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l4_2xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+
+/* L4 CORE */
+/* Display Sub system (DSS) */
+#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28
+#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29
+#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30
+#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31
+#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l4_3xxx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l4_3xxx.h
new file mode 100644
index 0000000..881a858
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/l4_3xxx.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+
+/* L4 CORE */
+#define OMAP3_L4_CORE_FW_I2C1_REGION 21
+#define OMAP3_L4_CORE_FW_I2C1_TA_REGION 22
+#define OMAP3_L4_CORE_FW_I2C2_REGION 23
+#define OMAP3_L4_CORE_FW_I2C2_TA_REGION 24
+#define OMAP3_L4_CORE_FW_I2C3_REGION 73
+#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74
+
+/* Display Sub system (DSS) */
+#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP 2
+
+#define OMAP3_L4_CORE_FW_DSS_DSI_REGION 104
+#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION 3
+#define OMAP3_L4_CORE_FW_DSS_CORE_REGION 4
+#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION 4
+#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION 5
+#define OMAP3_L4_CORE_FW_DSS_VENC_REGION 6
+#define OMAP3_L4_CORE_FW_DSS_TA_REGION 7
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/lcd_mipid.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/lcd_mipid.h
new file mode 100644
index 0000000..8e52c65
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/lcd_mipid.h
@@ -0,0 +1,29 @@
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+ MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+ MIPID_TEST_SUCCESS,
+ MIPID_TEST_INVALID,
+ MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+ int nreset_gpio;
+ int data_lines;
+
+ void (*shutdown)(struct mipid_platform_data *pdata);
+ void (*set_bklight_level)(struct mipid_platform_data *pdata,
+ int level);
+ int (*get_bklight_level)(struct mipid_platform_data *pdata);
+ int (*get_bklight_max)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/led.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/led.h
new file mode 100644
index 0000000..25e451e
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/led.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/led.h
+ *
+ * Copyright (C) 2006 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_LED_H
+#define ASMARM_ARCH_LED_H
+
+struct omap_led_config {
+ struct led_classdev cdev;
+ s16 gpio;
+};
+
+struct omap_led_platform_data {
+ s16 nr_leds;
+ struct omap_led_config *leds;
+};
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mailbox.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mailbox.h
new file mode 100644
index 0000000..cc3921e
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mailbox.h
@@ -0,0 +1,105 @@
+/* mailbox.h */
+
+#ifndef MAILBOX_H
+#define MAILBOX_H
+
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kfifo.h>
+
+typedef u32 mbox_msg_t;
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+typedef int __bitwise omap_mbox_type_t;
+#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
+#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
+
+struct omap_mbox_ops {
+ omap_mbox_type_t type;
+ int (*startup)(struct omap_mbox *mbox);
+ void (*shutdown)(struct omap_mbox *mbox);
+ /* fifo */
+ mbox_msg_t (*fifo_read)(struct omap_mbox *mbox);
+ void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
+ int (*fifo_empty)(struct omap_mbox *mbox);
+ int (*fifo_full)(struct omap_mbox *mbox);
+ /* irq */
+ void (*enable_irq)(struct omap_mbox *mbox,
+ omap_mbox_irq_t irq);
+ void (*disable_irq)(struct omap_mbox *mbox,
+ omap_mbox_irq_t irq);
+ void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+ int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+ /* ctx */
+ void (*save_ctx)(struct omap_mbox *mbox);
+ void (*restore_ctx)(struct omap_mbox *mbox);
+};
+
+struct omap_mbox_queue {
+ spinlock_t lock;
+ struct kfifo fifo;
+ struct work_struct work;
+ struct tasklet_struct tasklet;
+ struct omap_mbox *mbox;
+ bool full;
+};
+
+struct omap_mbox {
+ char *name;
+ unsigned int irq;
+ struct omap_mbox_queue *txq, *rxq;
+ struct omap_mbox_ops *ops;
+ struct device *dev;
+ void *priv;
+ int use_count;
+ struct blocking_notifier_head notifier;
+};
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
+void omap_mbox_init_seq(struct omap_mbox *);
+
+struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
+
+int omap_mbox_register(struct device *parent, struct omap_mbox **);
+int omap_mbox_unregister(void);
+
+static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->save_ctx) {
+ dev_err(mbox->dev, "%s:\tno save\n", __func__);
+ return;
+ }
+
+ mbox->ops->save_ctx(mbox);
+}
+
+static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->restore_ctx) {
+ dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+ return;
+ }
+
+ mbox->ops->restore_ctx(mbox);
+}
+
+static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
+ omap_mbox_irq_t irq)
+{
+ mbox->ops->enable_irq(mbox, irq);
+}
+
+static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
+ omap_mbox_irq_t irq)
+{
+ mbox->ops->disable_irq(mbox, irq);
+}
+
+#endif /* MAILBOX_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mcbsp.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mcbsp.h
new file mode 100644
index 0000000..1881412
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+
+#define MCBSP_CONFIG_TYPE2 0x2
+#define MCBSP_CONFIG_TYPE3 0x3
+#define MCBSP_CONFIG_TYPE4 0x4
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+ void (*request)(unsigned int);
+ void (*free)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+ struct omap_mcbsp_ops *ops;
+ u16 buffer_size;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
+};
+
+/**
+ * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
+ * @sidetone: name of the sidetone device
+ */
+struct omap_mcbsp_dev_attr {
+ const char *sidetone;
+};
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mcspi.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mcspi.h
new file mode 100644
index 0000000..a357eb2
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mcspi.h
@@ -0,0 +1,23 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+#define OMAP2_MCSPI_REV 0
+#define OMAP3_MCSPI_REV 1
+#define OMAP4_MCSPI_REV 2
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
+struct omap2_mcspi_platform_config {
+ unsigned short num_cs;
+ unsigned int regs_offset;
+};
+
+struct omap2_mcspi_dev_attr {
+ unsigned short num_chipselect;
+};
+
+struct omap2_mcspi_device_config {
+ unsigned turbo_mode:1;
+};
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/menelaus.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/menelaus.h
new file mode 100644
index 0000000..4a970ec
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/menelaus.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/plat-omap/include/mach/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+struct device;
+
+struct menelaus_platform_data {
+ int (* late_init)(struct device *dev);
+};
+
+extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+ void *data);
+extern void menelaus_unregister_mmc_callback(void);
+extern int menelaus_set_mmc_opendrain(int slot, int enable);
+extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
+
+extern int menelaus_set_vmem(unsigned int mV);
+extern int menelaus_set_vio(unsigned int mV);
+extern int menelaus_set_vmmc(unsigned int mV);
+extern int menelaus_set_vaux(unsigned int mV);
+extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
+extern int menelaus_set_slot_sel(int enable);
+extern int menelaus_get_slot_pin_states(void);
+extern int menelaus_set_vcore_sw(unsigned int mV);
+extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
+
+#define EN_VPLL_SLEEP (1 << 7)
+#define EN_VMMC_SLEEP (1 << 6)
+#define EN_VAUX_SLEEP (1 << 5)
+#define EN_VIO_SLEEP (1 << 4)
+#define EN_VMEM_SLEEP (1 << 3)
+#define EN_DC3_SLEEP (1 << 2)
+#define EN_DC2_SLEEP (1 << 1)
+#define EN_VC_SLEEP (1 << 0)
+
+extern int menelaus_set_regulator_sleep(int enable, u32 val);
+
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus() 1
+#else
+#define omap_has_menelaus() 0
+#endif
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mmc.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mmc.h
new file mode 100644
index 0000000..7a38750
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mmc.h
@@ -0,0 +1,198 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <plat/board.h>
+
+#define OMAP15XX_NR_MMC 1
+#define OMAP16XX_NR_MMC 2
+#define OMAP1_MMC_SIZE 0x080
+#define OMAP1_MMC1_BASE 0xfffb7800
+#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+
+#define OMAP24XX_NR_MMC 2
+#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
+#define OMAP2_MMC1_BASE 0x4809c000
+
+#define OMAP4_MMC_REG_OFFSET 0x100
+
+#define OMAP_MMC_MAX_SLOTS 2
+
+/*
+ * struct omap_mmc_dev_attr.flags possibilities
+ *
+ * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
+ * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
+ * should be set if this is the case. See for example Section 22.5.3
+ * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
+ * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
+ *
+ * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
+ * don't work correctly on some MMC controller instances on some
+ * OMAP3 SoCs; this flag should be set if this is the case. See
+ * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
+ * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
+ * Revision F (October 2010) (SPRZ278F).
+ */
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
+#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+
+struct omap_mmc_dev_attr {
+ u8 flags;
+};
+
+struct omap_mmc_platform_data {
+ /* back-link to device */
+ struct device *dev;
+
+ /* number of slots per controller */
+ unsigned nr_slots:2;
+
+ /* set if your board has components or wiring that limits the
+ * maximum frequency on the MMC bus */
+ unsigned int max_freq;
+
+ /* switch the bus to a new slot */
+ int (*switch_slot)(struct device *dev, int slot);
+ /* initialize board-specific MMC functionality, can be NULL if
+ * not supported */
+ int (*init)(struct device *dev);
+ void (*cleanup)(struct device *dev);
+ void (*shutdown)(struct device *dev);
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev, int slot);
+ int (*resume)(struct device *dev, int slot);
+
+ /* Return context loss count due to PM states changing */
+ int (*get_context_loss_count)(struct device *dev);
+
+ u64 dma_mask;
+
+ /* Integrating attributes from the omap_hwmod layer */
+ u8 controller_flags;
+
+ /* Register offset deviation */
+ u16 reg_offset;
+
+ struct omap_mmc_slot_data {
+
+ /*
+ * 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h)
+ */
+ u8 wires; /* Used for the MMC driver on omap1 and 2420 */
+ u32 caps; /* Used for the MMC driver on 2430 and later */
+ u32 pm_caps; /* PM capabilities of the mmc */
+
+ /*
+ * nomux means "standard" muxing is wrong on this board, and
+ * that board-specific code handled it before common init logic.
+ */
+ unsigned nomux:1;
+
+ /* switch pin can be for card detect (default) or card cover */
+ unsigned cover:1;
+
+ /* use the internal clock */
+ unsigned internal_clock:1;
+
+ /* nonremovable e.g. eMMC */
+ unsigned nonremovable:1;
+
+ /* Try to sleep or power off when possible */
+ unsigned power_saving:1;
+
+ /* If using power_saving and the MMC power is not to go off */
+ unsigned no_off:1;
+
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
+ /* Regulator off remapped to sleep */
+ unsigned vcc_aux_disable_is_sleep:1;
+
+ /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS (1 << 0)
+#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+ unsigned features;
+
+ int switch_pin; /* gpio (card detect) */
+ int gpio_wp; /* gpio (write protect) */
+
+ int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
+ int (*set_power)(struct device *dev, int slot,
+ int power_on, int vdd);
+ int (*get_ro)(struct device *dev, int slot);
+ void (*remux)(struct device *dev, int slot, int power_on);
+ /* Call back before enabling / disabling regulators */
+ void (*before_set_reg)(struct device *dev, int slot,
+ int power_on, int vdd);
+ /* Call back after enabling / disabling regulators */
+ void (*after_set_reg)(struct device *dev, int slot,
+ int power_on, int vdd);
+ /* if we have special card, init it using this callback */
+ void (*init_card)(struct mmc_card *card);
+
+ /* return MMC cover switch state, can be NULL if not supported.
+ *
+ * possible return values:
+ * 0 - closed
+ * 1 - open
+ */
+ int (*get_cover_state)(struct device *dev, int slot);
+
+ const char *name;
+ u32 ocr_mask;
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+ int (*card_detect)(struct device *dev, int slot);
+
+ unsigned int ban_openended:1;
+
+ } slots[OMAP_MMC_MAX_SLOTS];
+};
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+ int is_closed);
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers);
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
+int omap_mmc_add(const char *name, int id, unsigned long base,
+ unsigned long size, unsigned int irq,
+ struct omap_mmc_platform_data *data);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers)
+{
+}
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+}
+static inline int omap_mmc_add(const char *name, int id, unsigned long base,
+ unsigned long size, unsigned int irq,
+ struct omap_mmc_platform_data *data)
+{
+ return 0;
+}
+
+#endif
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/multi.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/multi.h
new file mode 100644
index 0000000..999ffba
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/multi.h
@@ -0,0 +1,102 @@
+/*
+ * Support for compiling in multiple OMAP processors
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PLAT_OMAP_MULTI_H
+#define __PLAT_OMAP_MULTI_H
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap16xx
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+# error "OMAP1 and OMAP2PLUS can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap4
+# endif
+#endif
+
+#endif /* __PLAT_OMAP_MULTI_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mux.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mux.h
new file mode 100644
index 0000000..aeba717
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/mux.h
@@ -0,0 +1,454 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ * For example, W8_1610_MMC2_DAT0, where:
+ * - W8 = ball
+ * - 1610 = 1510 or 1610, none if common for both 1510 and 1610
+ * - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+ .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
+ .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
+ .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
+ .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
+ .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
+ pull_reg, pull_bit, pull_status, \
+ pu_pd_reg, pu_pd_status, debug_status) \
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG(mux_reg, mode_offset, mode) \
+ PULL_REG(pull_reg, pull_bit, pull_status) \
+ PU_PD_REG(pu_pd_reg, pu_pd_status) \
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
+ * not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ * as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
+ pull_bit, pull_status, debug_status)\
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG_7XX(mux_reg, mode_offset, mode) \
+ PULL_REG_7XX(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(NA, 0) \
+},
+
+struct pin_config {
+ char *name;
+ const unsigned int mux_reg;
+ unsigned char debug;
+
+ const unsigned char mask_offset;
+ const unsigned char mask;
+
+ const char *pull_name;
+ const unsigned int pull_reg;
+ const unsigned char pull_val;
+ const unsigned char pull_bit;
+
+ const char *pu_pd_name;
+ const unsigned int pu_pd_reg;
+ const unsigned char pu_pd_val;
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+ /* OMAP 730 keyboard */
+ E2_7XX_KBR0,
+ J7_7XX_KBR1,
+ E1_7XX_KBR2,
+ F3_7XX_KBR3,
+ D2_7XX_KBR4,
+ C2_7XX_KBC0,
+ D3_7XX_KBC1,
+ E4_7XX_KBC2,
+ F4_7XX_KBC3,
+ E3_7XX_KBC4,
+
+ /* USB */
+ AA17_7XX_USB_DM,
+ W16_7XX_USB_PU_EN,
+ W17_7XX_USB_VBUSI,
+ W18_7XX_USB_DMCK_OUT,
+ W19_7XX_USB_DCRST,
+
+ /* MMC */
+ MMC_7XX_CMD,
+ MMC_7XX_CLK,
+ MMC_7XX_DAT0,
+
+ /* I2C */
+ I2C_7XX_SCL,
+ I2C_7XX_SDA,
+
+ /* SPI */
+ SPI_7XX_1,
+ SPI_7XX_2,
+ SPI_7XX_3,
+ SPI_7XX_4,
+ SPI_7XX_5,
+ SPI_7XX_6,
+
+ /* UART */
+ UART_7XX_1,
+ UART_7XX_2,
+};
+
+enum omap1xxx_index {
+ /* UART1 (BT_UART_GATING)*/
+ UART1_TX = 0,
+ UART1_RTS,
+
+ /* UART2 (COM_UART_GATING)*/
+ UART2_TX,
+ UART2_RX,
+ UART2_CTS,
+ UART2_RTS,
+
+ /* UART3 (GIGA_UART_GATING) */
+ UART3_TX,
+ UART3_RX,
+ UART3_CTS,
+ UART3_RTS,
+ UART3_CLKREQ,
+ UART3_BCLK, /* 12MHz clock out */
+ Y15_1610_UART3_RTS,
+
+ /* PWT & PWL */
+ PWT,
+ PWL,
+
+ /* USB master generic */
+ R18_USB_VBUS,
+ R18_1510_USB_GPIO0,
+ W4_USB_PUEN,
+ W4_USB_CLKO,
+ W4_USB_HIGHZ,
+ W4_GPIO58,
+
+ /* USB1 master */
+ USB1_SUSP,
+ USB1_SEO,
+ W13_1610_USB1_SE0,
+ USB1_TXEN,
+ USB1_TXD,
+ USB1_VP,
+ USB1_VM,
+ USB1_RCV,
+ USB1_SPEED,
+ R13_1610_USB1_SPEED,
+ R13_1710_USB1_SE0,
+
+ /* USB2 master */
+ USB2_SUSP,
+ USB2_VP,
+ USB2_TXEN,
+ USB2_VM,
+ USB2_RCV,
+ USB2_SEO,
+ USB2_TXD,
+
+ /* OMAP-1510 GPIO */
+ R18_1510_GPIO0,
+ R19_1510_GPIO1,
+ M14_1510_GPIO2,
+
+ /* OMAP1610 GPIO */
+ P18_1610_GPIO3,
+ Y15_1610_GPIO17,
+
+ /* OMAP-1710 GPIO */
+ R18_1710_GPIO0,
+ V2_1710_GPIO10,
+ N21_1710_GPIO14,
+ W15_1710_GPIO40,
+
+ /* MPUIO */
+ MPUIO2,
+ N15_1610_MPUIO2,
+ MPUIO4,
+ MPUIO5,
+ T20_1610_MPUIO5,
+ W11_1610_MPUIO6,
+ V10_1610_MPUIO7,
+ W11_1610_MPUIO9,
+ V10_1610_MPUIO10,
+ W10_1610_MPUIO11,
+ E20_1610_MPUIO13,
+ U20_1610_MPUIO14,
+ E19_1610_MPUIO15,
+
+ /* MCBSP2 */
+ MCBSP2_CLKR,
+ MCBSP2_CLKX,
+ MCBSP2_DR,
+ MCBSP2_DX,
+ MCBSP2_FSR,
+ MCBSP2_FSX,
+
+ /* MCBSP3 */
+ MCBSP3_CLKX,
+
+ /* Misc ballouts */
+ BALLOUT_V8_ARMIO3,
+ N20_HDQ,
+
+ /* OMAP-1610 MMC2 */
+ W8_1610_MMC2_DAT0,
+ V8_1610_MMC2_DAT1,
+ W15_1610_MMC2_DAT2,
+ R10_1610_MMC2_DAT3,
+ Y10_1610_MMC2_CLK,
+ Y8_1610_MMC2_CMD,
+ V9_1610_MMC2_CMDDIR,
+ V5_1610_MMC2_DATDIR0,
+ W19_1610_MMC2_DATDIR1,
+ R18_1610_MMC2_CLKIN,
+
+ /* OMAP-1610 External Trace Interface */
+ M19_1610_ETM_PSTAT0,
+ L15_1610_ETM_PSTAT1,
+ L18_1610_ETM_PSTAT2,
+ L19_1610_ETM_D0,
+ J19_1610_ETM_D6,
+ J18_1610_ETM_D7,
+
+ /* OMAP16XX GPIO */
+ P20_1610_GPIO4,
+ V9_1610_GPIO7,
+ W8_1610_GPIO9,
+ N20_1610_GPIO11,
+ N19_1610_GPIO13,
+ P10_1610_GPIO22,
+ V5_1610_GPIO24,
+ AA20_1610_GPIO_41,
+ W19_1610_GPIO48,
+ M7_1610_GPIO62,
+ V14_16XX_GPIO37,
+ R9_16XX_GPIO18,
+ L14_16XX_GPIO49,
+
+ /* OMAP-1610 uWire */
+ V19_1610_UWIRE_SCLK,
+ U18_1610_UWIRE_SDI,
+ W21_1610_UWIRE_SDO,
+ N14_1610_UWIRE_CS0,
+ P15_1610_UWIRE_CS3,
+ N15_1610_UWIRE_CS1,
+
+ /* OMAP-1610 SPI */
+ U19_1610_SPIF_SCK,
+ U18_1610_SPIF_DIN,
+ P20_1610_SPIF_DIN,
+ W21_1610_SPIF_DOUT,
+ R18_1610_SPIF_DOUT,
+ N14_1610_SPIF_CS0,
+ N15_1610_SPIF_CS1,
+ T19_1610_SPIF_CS2,
+ P15_1610_SPIF_CS3,
+
+ /* OMAP-1610 Flash */
+ L3_1610_FLASH_CS2B_OE,
+ M8_1610_FLASH_CS2B_WE,
+
+ /* First MMC */
+ MMC_CMD,
+ MMC_DAT1,
+ MMC_DAT2,
+ MMC_DAT0,
+ MMC_CLK,
+ MMC_DAT3,
+
+ /* OMAP-1710 MMC CMDDIR and DATDIR0 */
+ M15_1710_MMC_CLKI,
+ P19_1710_MMC_CMDDIR,
+ P20_1710_MMC_DATDIR0,
+
+ /* OMAP-1610 USB0 alternate pin configuration */
+ W9_USB0_TXEN,
+ AA9_USB0_VP,
+ Y5_USB0_RCV,
+ R9_USB0_VM,
+ V6_USB0_TXD,
+ W5_USB0_SE0,
+ V9_USB0_SPEED,
+ V9_USB0_SUSP,
+
+ /* USB2 */
+ W9_USB2_TXEN,
+ AA9_USB2_VP,
+ Y5_USB2_RCV,
+ R9_USB2_VM,
+ V6_USB2_TXD,
+ W5_USB2_SE0,
+
+ /* 16XX UART */
+ R13_1610_UART1_TX,
+ V14_16XX_UART1_RX,
+ R14_1610_UART1_CTS,
+ AA15_1610_UART1_RTS,
+ R9_16XX_UART2_RX,
+ L14_16XX_UART3_RX,
+
+ /* I2C OMAP-1610 */
+ I2C_SCL,
+ I2C_SDA,
+
+ /* Keypad */
+ F18_1610_KBC0,
+ D20_1610_KBC1,
+ D19_1610_KBC2,
+ E18_1610_KBC3,
+ C21_1610_KBC4,
+ G18_1610_KBR0,
+ F19_1610_KBR1,
+ H14_1610_KBR2,
+ E20_1610_KBR3,
+ E19_1610_KBR4,
+ N19_1610_KBR5,
+
+ /* Power management */
+ T20_1610_LOW_PWR,
+
+ /* MCLK Settings */
+ V5_1710_MCLK_ON,
+ V5_1710_MCLK_OFF,
+ R10_1610_MCLK_ON,
+ R10_1610_MCLK_OFF,
+
+ /* CompactFlash controller */
+ P11_1610_CF_CD2,
+ R11_1610_CF_IOIS16,
+ V10_1610_CF_IREQ,
+ W10_1610_CF_RESET,
+ W11_1610_CF_CD1,
+
+ /* parallel camera */
+ J15_1610_CAM_LCLK,
+ J18_1610_CAM_D7,
+ J19_1610_CAM_D6,
+ J14_1610_CAM_D5,
+ K18_1610_CAM_D4,
+ K19_1610_CAM_D3,
+ K15_1610_CAM_D2,
+ K14_1610_CAM_D1,
+ L19_1610_CAM_D0,
+ L18_1610_CAM_VS,
+ L15_1610_CAM_HS,
+ M19_1610_CAM_RSTZ,
+ Y15_1610_CAM_OUTCLK,
+
+ /* serial camera */
+ H19_1610_CAM_EXCLK,
+ Y12_1610_CCP_CLKP,
+ W13_1610_CCP_CLKM,
+ W14_1610_CCP_DATAP,
+ Y14_1610_CCP_DATAM,
+
+};
+
+struct omap_mux_cfg {
+ struct pin_config *pins;
+ unsigned long size;
+ int (*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/nand.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/nand.h
new file mode 100644
index 0000000..67fc506
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/nand.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/gpmc.h>
+#include <linux/mtd/partitions.h>
+
+enum nand_io {
+ NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
+ NAND_OMAP_POLLED, /* polled mode, without prefetch */
+ NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */
+ NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
+};
+
+struct omap_nand_platform_data {
+ int cs;
+ struct mtd_partition *parts;
+ struct gpmc_timings *gpmc_t;
+ int nr_parts;
+ bool dev_ready;
+ int gpmc_irq;
+ enum nand_io xfer_type;
+ unsigned long phys_base;
+ int devsize;
+ enum omap_ecc ecc_opt;
+};
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE 4
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+ return 0;
+}
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-pm.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-pm.h
new file mode 100644
index 0000000..67faa7b
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -0,0 +1,352 @@
+/*
+ * omap-pm.h - OMAP power management interface
+ *
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
+ * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
+ * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
+ * Richard Woodruff
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
+#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
+
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/opp.h>
+
+/*
+ * agent_id values for use with omap_pm_set_min_bus_tput():
+ *
+ * OCP_INITIATOR_AGENT is only valid for devices that can act as
+ * initiators -- it represents the device's L3 interconnect
+ * connection. OCP_TARGET_AGENT represents the device's L4
+ * interconnect connection.
+ */
+#define OCP_TARGET_AGENT 1
+#define OCP_INITIATOR_AGENT 2
+
+/**
+ * omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
+ *
+ * Initialize anything that must be configured before the clock
+ * framework starts. The "_if_" is to avoid name collisions with the
+ * PM idle-loop code.
+ */
+int __init omap_pm_if_early_init(void);
+
+/**
+ * omap_pm_if_init - OMAP PM init code called after clock fw init
+ *
+ * The main initialization code. OPP tables are passed in here. The
+ * "_if_" is to avoid name collisions with the PM idle-loop code.
+ */
+int __init omap_pm_if_init(void);
+
+/**
+ * omap_pm_if_exit - OMAP PM exit code
+ *
+ * Exit code; currently unused. The "_if_" is to avoid name
+ * collisions with the PM idle-loop code.
+ */
+void omap_pm_if_exit(void);
+
+/*
+ * Device-driver-originated constraints (via board-*.c files, platform_data)
+ */
+
+
+/**
+ * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
+ * @dev: struct device * requesting the constraint
+ * @t: maximum MPU wakeup latency in microseconds
+ *
+ * Request that the maximum interrupt latency for the MPU to be no
+ * greater than @t microseconds. "Interrupt latency" in this case is
+ * defined as the elapsed time from the occurrence of a hardware or
+ * timer interrupt to the time when the device driver's interrupt
+ * service routine has been entered by the MPU.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the MPU powerdomain into, and
+ * possibly the CORE powerdomain as well, since interrupt handling
+ * code currently runs from SDRAM. Advanced PM or board*.c code may
+ * also configure interrupt controller priorities, OCP bus priorities,
+ * CPU speed(s), etc.
+ *
+ * This function will not affect device wakeup latency, e.g., time
+ * elapsed from when a device driver enables a hardware device with
+ * clk_enable(), to when the device is ready for register access or
+ * other use. To control this device wakeup latency, use
+ * omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
+ * previous t value. To remove the latency target for the MPU, call
+ * with t = -1.
+ *
+ * XXX This constraint will be deprecated soon in favor of the more
+ * general omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
+ * @dev: struct device * requesting the constraint
+ * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
+ * @r: minimum throughput (in KiB/s)
+ *
+ * Request that the minimum data throughput on the OCP interconnect
+ * attached to device @dev interconnect agent @tbus_id be no less
+ * than @r KiB/s.
+ *
+ * It is expected that the OMAP PM or bus code will use this
+ * information to set the interconnect clock to run at the lowest
+ * possible speed that satisfies all current system users. The PM or
+ * bus code will adjust the estimate based on its model of the bus, so
+ * device driver authors should attempt to specify an accurate
+ * quantity for their device use case, and let the PM or bus code
+ * overestimate the numbers as necessary to handle request/response
+ * latency, other competing users on the system, etc. On OMAP2/3, if
+ * a driver requests a minimum L4 interconnect speed constraint, the
+ * code will also need to add an minimum L3 interconnect speed
+ * constraint,
+ *
+ * Multiple calls to omap_pm_set_min_bus_tput() will replace the
+ * previous rate value for this device. To remove the interconnect
+ * throughput restriction for this device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+
+
+/**
+ * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
+ * @req_dev: struct device * requesting the constraint, or NULL if none
+ * @dev: struct device * to set the constraint one
+ * @t: maximum device wakeup latency in microseconds
+ *
+ * Request that the maximum amount of time necessary for a device @dev
+ * to become accessible after its clocks are enabled should be no
+ * greater than @t microseconds. Specifically, this represents the
+ * time from when a device driver enables device clocks with
+ * clk_enable(), to when the register reads and writes on the device
+ * will succeed. This function should be called before clk_disable()
+ * is called, since the power state transition decision may be made
+ * during clk_disable().
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the powerdomain enclosing this
+ * device into.
+ *
+ * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device. To remove the
+ * wakeup latency restriction for this device, call with t = -1.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+ long t);
+
+
+/**
+ * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
+ * @dev: struct device *
+ * @t: maximum DMA transfer start latency in microseconds
+ *
+ * Request that the maximum system DMA transfer start latency for this
+ * device 'dev' should be no greater than 't' microseconds. "DMA
+ * transfer start latency" here is defined as the elapsed time from
+ * when a device (e.g., McBSP) requests that a system DMA transfer
+ * start or continue, to the time at which data starts to flow into
+ * that device from the system DMA controller.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the CORE powerdomain into.
+ *
+ * Since system DMA transfers may not involve the MPU, this function
+ * will not affect MPU wakeup latency. Use set_max_cpu_lat() to do
+ * so. Similarly, this function will not affect device wakeup latency
+ * -- use set_max_dev_wakeup_lat() to affect that.
+ *
+ * Multiple calls to set_max_sdma_lat() will replace the previous t
+ * value for this device. To remove the maximum DMA latency for this
+ * device, call with t = -1.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
+ * @dev: struct device * requesting the constraint
+ * @clk: struct clk * to set the minimum rate constraint on
+ * @r: minimum rate in Hz
+ *
+ * Request that the minimum clock rate on the device @dev's clk @clk
+ * be no less than @r Hz.
+ *
+ * It is expected that the OMAP PM code will use this information to
+ * find an OPP or clock setting that will satisfy this clock rate
+ * constraint, along with any other applicable system constraints on
+ * the clock rate or corresponding voltage, etc.
+ *
+ * omap_pm_set_min_clk_rate() differs from the clock code's
+ * clk_set_rate() in that it considers other constraints before taking
+ * any hardware action, and may change a system OPP rather than just a
+ * clock rate. clk_set_rate() is intended to be a low-level
+ * interface.
+ *
+ * omap_pm_set_min_clk_rate() is easily open to abuse. A better API
+ * would be something like "omap_pm_set_min_dev_performance()";
+ * however, there is no easily-generalizable concept of performance
+ * that applies to all devices. Only a device (and possibly the
+ * device subsystem) has both the subsystem-specific knowledge, and
+ * the hardware IP block-specific knowledge, to translate a constraint
+ * on "touchscreen sampling accuracy" or "number of pixels or polygons
+ * rendered per second" to a clock rate. This translation can be
+ * dependent on the hardware IP block's revision, or firmware version,
+ * and the driver is the only code on the system that has this
+ * information and can know how to translate that into a clock rate.
+ *
+ * The intended use-case for this function is for userspace or other
+ * kernel code to communicate a particular performance requirement to
+ * a subsystem; then for the subsystem to communicate that requirement
+ * to something that is meaningful to the device driver; then for the
+ * device driver to convert that requirement to a clock rate, and to
+ * then call omap_pm_set_min_clk_rate().
+ *
+ * Users of this function (such as device drivers) should not simply
+ * call this function with some high clock rate to ensure "high
+ * performance." Rather, the device driver should take a performance
+ * constraint from its subsystem, such as "render at least X polygons
+ * per second," and use some formula or table to convert that into a
+ * clock rate constraint given the hardware type and hardware
+ * revision. Device drivers or subsystems should not assume that they
+ * know how to make a power/performance tradeoff - some device use
+ * cases may tolerate a lower-fidelity device function for lower power
+ * consumption; others may demand a higher-fidelity device function,
+ * no matter what the power consumption.
+ *
+ * Multiple calls to omap_pm_set_min_clk_rate() will replace the
+ * previous rate value for the device @dev. To remove the minimum clock
+ * rate constraint for the device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+/**
+ * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
+ *
+ * Intended for use by DSPBridge. Returns an array of OPP->DSP clock
+ * frequency entries. The final item in the array should have .rate =
+ * .opp_id = 0.
+ */
+const struct omap_opp *omap_pm_dsp_get_opp_table(void);
+
+/**
+ * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
+ * @opp_id: target DSP OPP ID
+ *
+ * Set a minimum OPP ID for the DSP. This is intended to be called
+ * only from the DSP Bridge MPU-side driver. Unfortunately, the only
+ * information that code receives from the DSP/BIOS load estimator is the
+ * target OPP ID; hence, this interface. No return value.
+ */
+void omap_pm_dsp_set_min_opp(u8 opp_id);
+
+/**
+ * omap_pm_dsp_get_opp - report the current DSP OPP ID
+ *
+ * Report the current OPP for the DSP. Since on OMAP3, the DSP and
+ * MPU share a single voltage domain, the OPP ID returned back may
+ * represent a higher DSP speed than the OPP requested via
+ * omap_pm_dsp_set_min_opp().
+ *
+ * Returns the current VDD1 OPP ID, or 0 upon error.
+ */
+u8 omap_pm_dsp_get_opp(void);
+
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+/**
+ * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
+ *
+ * Provide a frequency table usable by CPUFreq for the current chip/board.
+ * Returns a pointer to a struct cpufreq_frequency_table array or NULL
+ * upon error.
+ */
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
+
+/**
+ * omap_pm_cpu_set_freq - set the current minimum MPU frequency
+ * @f: MPU frequency in Hz
+ *
+ * Set the current minimum CPU frequency. The actual CPU frequency
+ * used could end up higher if the DSP requested a higher OPP.
+ * Intended to be called by plat-omap/cpu_omap.c:omap_target(). No
+ * return value.
+ */
+void omap_pm_cpu_set_freq(unsigned long f);
+
+/**
+ * omap_pm_cpu_get_freq - report the current CPU frequency
+ *
+ * Returns the current MPU frequency, or 0 upon error.
+ */
+unsigned long omap_pm_cpu_get_freq(void);
+
+
+/*
+ * Device context loss tracking
+ */
+
+/**
+ * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
+ * @dev: struct device *
+ *
+ * This function returns the number of times that the device @dev has
+ * lost its internal context. This generally occurs on a powerdomain
+ * transition to OFF. Drivers use this as an optimization to avoid restoring
+ * context if the device hasn't lost it. To use, drivers should initially
+ * call this in their context save functions and store the result. Early in
+ * the driver's context restore function, the driver should call this function
+ * again, and compare the result to the stored counter. If they differ, the
+ * driver must restore device context. If the number of context losses
+ * exceeds the maximum positive integer, the function will wrap to 0 and
+ * continue counting. Returns the number of context losses for this device,
+ * or negative value upon error.
+ */
+int omap_pm_get_dev_context_loss_count(struct device *dev);
+
+void omap_pm_enable_off_mode(void);
+void omap_pm_disable_off_mode(void);
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-secure.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-secure.h
new file mode 100644
index 0000000..8c7994c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -0,0 +1,19 @@
+#ifndef __OMAP_SECURE_H__
+#define __OMAP_SECURE_H__
+
+#include <linux/types.h>
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+extern int omap_secure_ram_reserve_memblock(void);
+#else
+static inline void omap_secure_ram_reserve_memblock(void)
+{ }
+#endif
+
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
+#endif /* __OMAP_SECURE_H__ */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-serial.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-serial.h
new file mode 100644
index 0000000..9ff4444
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -0,0 +1,141 @@
+/*
+ * Driver for OMAP-UART controller.
+ * Based on drivers/serial/8250.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Authors:
+ * Govindraj R <govindraj.raja@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/pm_qos.h>
+
+#include <plat/mux.h>
+
+#define DRIVER_NAME "omap_uart"
+
+/*
+ * Use tty device name as ttyO, [O -> OMAP]
+ * in bootargs we specify as console=ttyO0 if uart1
+ * is used as console uart.
+ */
+#define OMAP_SERIAL_NAME "ttyO"
+
+#define OMAP_MODE13X_SPEED 230400
+
+#define OMAP_UART_SCR_TX_EMPTY 0x08
+
+/* WER = 0x7F
+ * Enable module level wakeup in WER reg
+ */
+#define OMAP_UART_WER_MOD_WKUP 0X7F
+
+/* Enable XON/XOFF flow control on output */
+#define OMAP_UART_SW_TX 0x04
+
+/* Enable XON/XOFF flow control on input */
+#define OMAP_UART_SW_RX 0x04
+
+#define OMAP_UART_SYSC_RESET 0X07
+#define OMAP_UART_TCR_TRIG 0X0F
+#define OMAP_UART_SW_CLR 0XF0
+#define OMAP_UART_FIFO_CLR 0X06
+
+#define OMAP_UART_DMA_CH_FREE -1
+
+#define OMAP_MAX_HSUART_PORTS 4
+
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+
+#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
+#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
+
+struct omap_uart_port_info {
+ bool dma_enabled; /* To specify DMA Mode */
+ unsigned int uartclk; /* UART clock rate */
+ upf_t flags; /* UPF_* flags */
+ u32 errata;
+ unsigned int dma_rx_buf_size;
+ unsigned int dma_rx_timeout;
+ unsigned int autosuspend_timeout;
+ unsigned int dma_rx_poll_rate;
+
+ int (*get_context_loss_count)(struct device *);
+ void (*set_forceidle)(struct platform_device *);
+ void (*set_noidle)(struct platform_device *);
+ void (*enable_wakeup)(struct platform_device *, bool);
+};
+
+struct uart_omap_dma {
+ u8 uart_dma_tx;
+ u8 uart_dma_rx;
+ int rx_dma_channel;
+ int tx_dma_channel;
+ dma_addr_t rx_buf_dma_phys;
+ dma_addr_t tx_buf_dma_phys;
+ unsigned int uart_base;
+ /*
+ * Buffer for rx dma.It is not required for tx because the buffer
+ * comes from port structure.
+ */
+ unsigned char *rx_buf;
+ unsigned int prev_rx_dma_pos;
+ int tx_buf_size;
+ int tx_dma_used;
+ int rx_dma_used;
+ spinlock_t tx_lock;
+ spinlock_t rx_lock;
+ /* timer to poll activity on rx dma */
+ struct timer_list rx_timer;
+ unsigned int rx_buf_size;
+ unsigned int rx_poll_rate;
+ unsigned int rx_timeout;
+};
+
+struct uart_omap_port {
+ struct uart_port port;
+ struct uart_omap_dma uart_dma;
+ struct platform_device *pdev;
+
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char fcr;
+ unsigned char efr;
+ unsigned char dll;
+ unsigned char dlh;
+ unsigned char mdr1;
+ unsigned char scr;
+
+ int use_dma;
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+ unsigned int lsr_break_flag;
+ unsigned char msr_saved_flags;
+ char name[20];
+ unsigned long port_activity;
+ u32 context_loss_cnt;
+ u32 errata;
+ u8 wakeups_enabled;
+
+ struct pm_qos_request pm_qos_request;
+ u32 latency;
+ u32 calc_latency;
+ struct work_struct qos_work;
+};
+
+#endif /* __OMAP_SERIAL_H__ */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap1510.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap1510.h
new file mode 100644
index 0000000..d240046
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap1510.h
@@ -0,0 +1,50 @@
+/* arch/arm/plat-omap/include/mach/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE 0xE0000000
+#define OMAP1510_DSP_SIZE 0x28000
+#define OMAP1510_DSP_START 0xE0000000
+
+#define OMAP1510_DSPREG_BASE 0xE1000000
+#define OMAP1510_DSPREG_SIZE SZ_128K
+#define OMAP1510_DSPREG_START 0xE1000000
+
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
+#endif /* __ASM_ARCH_OMAP15XX_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap16xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap16xx.h
new file mode 100644
index 0000000..e69e1d8
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -0,0 +1,202 @@
+/* arch/arm/plat-omap/include/mach/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE 0xE0000000
+#define OMAP16XX_DSP_SIZE 0x28000
+#define OMAP16XX_DSP_START 0xE0000000
+
+#define OMAP16XX_DSPREG_BASE 0xE1000000
+#define OMAP16XX_DSPREG_SIZE SZ_128K
+#define OMAP16XX_DSPREG_START 0xE1000000
+
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE (0xfffe0000)
+#define OMAP_IH2_1_BASE (0xfffe0100)
+#define OMAP_IH2_2_BASE (0xfffe0200)
+#define OMAP_IH2_3_BASE (0xfffe0300)
+
+#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL 0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Mapping through MPU bus */
+#define UART3_RHR (OMAP1_UART3_BASE + 0)
+#define UART3_THR (OMAP1_UART3_BASE + 0)
+#define UART3_DLL (OMAP1_UART3_BASE + 0)
+#define UART3_IER (OMAP1_UART3_BASE + 4)
+#define UART3_DLH (OMAP1_UART3_BASE + 4)
+#define UART3_IIR (OMAP1_UART3_BASE + 8)
+#define UART3_FCR (OMAP1_UART3_BASE + 8)
+#define UART3_EFR (OMAP1_UART3_BASE + 8)
+#define UART3_LCR (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1 (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2 (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1 (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2 (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1 (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2 (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16 (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR (OMAP1_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000)
+#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT 5
+#define WCLR_PTV_SHIFT 2
+
+#define WWPS_W_PEND_WSPR (1 << 4)
+#define WWPS_W_PEND_WTGR (1 << 3)
+#define WWPS_W_PEND_WLDR (1 << 2)
+#define WWPS_W_PEND_WCRR (1 << 1)
+#define WWPS_W_PEND_WCLR (1 << 0)
+
+#define WSPR_ENABLE_0 (0x0000bbbb)
+#define WSPR_ENABLE_1 (0x00004444)
+#define WSPR_DISABLE_0 (0x0000aaaa)
+#define WSPR_DISABLE_1 (0x00005555)
+
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
+#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
+
+#endif /* __ASM_ARCH_OMAP16XX_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap24xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap24xx.h
new file mode 100644
index 0000000..92df9e2
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP2_H
+#define __ASM_ARCH_OMAP2_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE 0x48000000
+#define L4_WK_243X_BASE 0x49000000
+#define L3_24XX_BASE 0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE 0x40000000
+
+#define OMAP242X_CTRL_BASE L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE 0x68008000
+#define OMAP2420_GPMC_BASE 0x6800a000
+
+#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE 0x6C000000
+#define OMAP243X_SDRC_BASE 0x6D000000
+#define OMAP243X_GPMC_BASE 0x6E000000
+#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE 0x58000000
+#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE 0x5C000000
+#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
+
+#endif /* __ASM_ARCH_OMAP2_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap34xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap34xx.h
new file mode 100644
index 0000000..0d818ac
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_OMAP3_H
+#define __ASM_ARCH_OMAP3_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE 0x48000000
+#define L4_WK_34XX_BASE 0x48300000
+#define L4_PER_34XX_BASE 0x49000000
+#define L4_EMU_34XX_BASE 0x54000000
+#define L3_34XX_BASE 0x68000000
+
+#define L4_WK_AM33XX_BASE 0x44C00000
+
+#define OMAP3430_32KSYNCT_BASE 0x48320000
+#define OMAP3430_CM_BASE 0x48004800
+#define OMAP3430_PRM_BASE 0x48306800
+#define OMAP343X_SMS_BASE 0x6C000000
+#define OMAP343X_SDRC_BASE 0x6D000000
+#define OMAP34XX_GPMC_BASE 0x6E000000
+#define OMAP343X_SCM_BASE 0x48002000
+#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE 0x48200000
+
+#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_REGS1_BASE (OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSIPHY2_BASE (OMAP3430_ISP_BASE + 0x1970)
+#define OMAP3630_ISP_CSI2A_REGS2_BASE (OMAP3430_ISP_BASE + 0x19C0)
+#define OMAP3630_ISP_CSI2C_REGS1_BASE (OMAP3430_ISP_BASE + 0x1C00)
+#define OMAP3630_ISP_CSIPHY1_BASE (OMAP3430_ISP_BASE + 0x1D70)
+#define OMAP3630_ISP_CSI2C_REGS2_BASE (OMAP3430_ISP_BASE + 0x1DC0)
+
+#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F)
+#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077)
+#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF)
+#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7)
+#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047)
+#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F)
+#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F)
+#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB)
+#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB)
+#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F)
+#define OMAP3430_ISP_CSI2A_REGS1_END (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F)
+#define OMAP3430_ISP_CSIPHY2_END (OMAP3430_ISP_CSIPHY2_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2A_REGS2_END (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F)
+#define OMAP3630_ISP_CSI2C_REGS1_END (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F)
+#define OMAP3630_ISP_CSIPHY1_END (OMAP3630_ISP_CSIPHY1_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2C_REGS2_END (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F)
+
+#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
+#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000)
+#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400)
+#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800)
+#define OMAP34XX_SR1_BASE 0x480C9000
+#define OMAP34XX_SR2_BASE 0x480CB000
+
+#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
+
+/* Security */
+#define OMAP34XX_SEC_BASE (L4_34XX_BASE + 0xA0000)
+#define OMAP34XX_SEC_SHA1MD5_BASE (OMAP34XX_SEC_BASE + 0x23000)
+#define OMAP34XX_SEC_AES_BASE (OMAP34XX_SEC_BASE + 0x25000)
+
+#endif /* __ASM_ARCH_OMAP3_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap4-keypad.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap4-keypad.h
new file mode 100644
index 0000000..8ad0a37
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -0,0 +1,6 @@
+#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
+ struct omap_board_data *);
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap44xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap44xx.h
new file mode 100644
index 0000000..c0d478e
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -0,0 +1,62 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE 0x4a000000
+#define L4_WK_44XX_BASE 0x4a300000
+#define L4_PER_44XX_BASE 0x48000000
+#define L4_EMU_44XX_BASE 0x54000000
+#define L3_44XX_BASE 0x44000000
+#define OMAP44XX_EMIF1_BASE 0x4c000000
+#define OMAP44XX_EMIF2_BASE 0x4d000000
+#define OMAP44XX_DMM_BASE 0x4e000000
+#define OMAP4430_32KSYNCT_BASE 0x4a304000
+#define OMAP4430_CM1_BASE 0x4a004000
+#define OMAP4430_CM_BASE OMAP4430_CM1_BASE
+#define OMAP4430_CM2_BASE 0x4a008000
+#define OMAP4430_PRM_BASE 0x4a306000
+#define OMAP4430_PRCM_MPU_BASE 0x48243000
+#define OMAP44XX_GPMC_BASE 0x50000000
+#define OMAP443X_SCM_BASE 0x4a002000
+#define OMAP443X_CTRL_BASE 0x4a100000
+#define OMAP44XX_IC_BASE 0x48200000
+#define OMAP44XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+#define OMAP44XX_GIC_DIST_BASE 0x48241000
+#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_SCU_BASE 0x48240000
+#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_L2CACHE_BASE 0x48242000
+#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_MCPDM_BASE 0x40132000
+#define OMAP44XX_MCPDM_L3_BASE 0x49032000
+#define OMAP44XX_SAR_RAM_BASE 0x4a326000
+
+#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
+#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
+
+#define OMAP4_MMU1_BASE 0x55082000
+#define OMAP4_MMU2_BASE 0x4A066000
+
+#define OMAP44XX_USBTLL_BASE (L4_44XX_BASE + 0x62000)
+#define OMAP44XX_UHH_CONFIG_BASE (L4_44XX_BASE + 0x64000)
+#define OMAP44XX_HSUSB_OHCI_BASE (L4_44XX_BASE + 0x64800)
+#define OMAP44XX_HSUSB_EHCI_BASE (L4_44XX_BASE + 0x64C00)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap730.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap730.h
new file mode 100644
index 0000000..14272bc
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap730.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_DSP_BASE 0xE0000000
+#define OMAP730_DSP_SIZE 0x50000
+#define OMAP730_DSP_START 0xE0000000
+
+#define OMAP730_DSPREG_BASE 0xE1000000
+#define OMAP730_DSPREG_SIZE SZ_128K
+#define OMAP730_DSPREG_START 0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE 0xfffe1000
+#define OMAP730_IO_CONF_0 0xfffe1070
+#define OMAP730_IO_CONF_1 0xfffe1074
+#define OMAP730_IO_CONF_2 0xfffe1078
+#define OMAP730_IO_CONF_3 0xfffe107c
+#define OMAP730_IO_CONF_4 0xfffe1080
+#define OMAP730_IO_CONF_5 0xfffe1084
+#define OMAP730_IO_CONF_6 0xfffe1088
+#define OMAP730_IO_CONF_7 0xfffe108c
+#define OMAP730_IO_CONF_8 0xfffe1090
+#define OMAP730_IO_CONF_9 0xfffe1094
+#define OMAP730_IO_CONF_10 0xfffe1098
+#define OMAP730_IO_CONF_11 0xfffe109c
+#define OMAP730_IO_CONF_12 0xfffe10a0
+#define OMAP730_IO_CONF_13 0xfffe10a4
+
+#define OMAP730_MODE_1 0xfffe1010
+#define OMAP730_MODE_2 0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET 0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0 0xfffecc10
+#define OMAP730_FLASH_ACFG_0 0xfffecc50
+#define OMAP730_FLASH_CFG_1 0xfffecc14
+#define OMAP730_FLASH_ACFG_1 0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE 0xfffbb800
+#define OMAP730_DSP_M_CTL 0xfffbb804
+#define OMAP730_DSP_MMU_BASE 0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /* __ASM_ARCH_OMAP730_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap7xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap7xx.h
new file mode 100644
index 0000000..48e4757
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -0,0 +1,107 @@
+/* arch/arm/plat-omap/include/mach/omap7xx.h
+ *
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE 0xE0000000
+#define OMAP7XX_DSP_SIZE 0x50000
+#define OMAP7XX_DSP_START 0xE0000000
+
+#define OMAP7XX_DSPREG_BASE 0xE1000000
+#define OMAP7XX_DSPREG_SIZE SZ_128K
+#define OMAP7XX_DSPREG_START 0xE1000000
+
+#define OMAP7XX_SPI1_BASE 0xfffc0800
+#define OMAP7XX_SPI2_BASE 0xfffc1000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE 0xfffe1000
+#define OMAP7XX_IO_CONF_0 0xfffe1070
+#define OMAP7XX_IO_CONF_1 0xfffe1074
+#define OMAP7XX_IO_CONF_2 0xfffe1078
+#define OMAP7XX_IO_CONF_3 0xfffe107c
+#define OMAP7XX_IO_CONF_4 0xfffe1080
+#define OMAP7XX_IO_CONF_5 0xfffe1084
+#define OMAP7XX_IO_CONF_6 0xfffe1088
+#define OMAP7XX_IO_CONF_7 0xfffe108c
+#define OMAP7XX_IO_CONF_8 0xfffe1090
+#define OMAP7XX_IO_CONF_9 0xfffe1094
+#define OMAP7XX_IO_CONF_10 0xfffe1098
+#define OMAP7XX_IO_CONF_11 0xfffe109c
+#define OMAP7XX_IO_CONF_12 0xfffe10a0
+#define OMAP7XX_IO_CONF_13 0xfffe10a4
+
+#define OMAP7XX_MODE_1 0xfffe1010
+#define OMAP7XX_MODE_2 0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET 0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0 0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0 0xfffecc50
+#define OMAP7XX_FLASH_CFG_1 0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1 0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE 0xfffbb800
+#define OMAP7XX_DSP_M_CTL 0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE 0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /* __ASM_ARCH_OMAP7XX_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap850.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap850.h
new file mode 100644
index 0000000..c33f679
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap850.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap850.h
+ *
+ * Hardware definitions for TI OMAP850 processor.
+ *
+ * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP850_H
+#define __ASM_ARCH_OMAP850_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP850_DSP_BASE 0xE0000000
+#define OMAP850_DSP_SIZE 0x50000
+#define OMAP850_DSP_START 0xE0000000
+
+#define OMAP850_DSPREG_BASE 0xE1000000
+#define OMAP850_DSPREG_SIZE SZ_128K
+#define OMAP850_DSPREG_START 0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_CONFIG_BASE 0xfffe1000
+#define OMAP850_IO_CONF_0 0xfffe1070
+#define OMAP850_IO_CONF_1 0xfffe1074
+#define OMAP850_IO_CONF_2 0xfffe1078
+#define OMAP850_IO_CONF_3 0xfffe107c
+#define OMAP850_IO_CONF_4 0xfffe1080
+#define OMAP850_IO_CONF_5 0xfffe1084
+#define OMAP850_IO_CONF_6 0xfffe1088
+#define OMAP850_IO_CONF_7 0xfffe108c
+#define OMAP850_IO_CONF_8 0xfffe1090
+#define OMAP850_IO_CONF_9 0xfffe1094
+#define OMAP850_IO_CONF_10 0xfffe1098
+#define OMAP850_IO_CONF_11 0xfffe109c
+#define OMAP850_IO_CONF_12 0xfffe10a0
+#define OMAP850_IO_CONF_13 0xfffe10a4
+
+#define OMAP850_MODE_1 0xfffe1010
+#define OMAP850_MODE_2 0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP850_MODE2_OFFSET 0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_FLASH_CFG_0 0xfffecc10
+#define OMAP850_FLASH_ACFG_0 0xfffecc50
+#define OMAP850_FLASH_CFG_1 0xfffecc14
+#define OMAP850_FLASH_ACFG_1 0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_ICR_BASE 0xfffbb800
+#define OMAP850_DSP_M_CTL 0xfffbb804
+#define OMAP850_DSP_MMU_BASE 0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900)
+#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /* __ASM_ARCH_OMAP850_H */
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap_device.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap_device.h
new file mode 100644
index 0000000..4327b2c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap_device.h
@@ -0,0 +1,170 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ * platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details. omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/omap_hwmod.h>
+
+extern struct dev_pm_domain omap_device_pm_domain;
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN 0
+#define OMAP_DEVICE_STATE_ENABLED 1
+#define OMAP_DEVICE_STATE_IDLE 2
+#define OMAP_DEVICE_STATE_SHUTDOWN 3
+
+/* omap_device.flags values */
+#define OMAP_DEVICE_SUSPENDED BIT(0)
+#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in nanoseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+ struct platform_device *pdev;
+ struct omap_hwmod **hwmods;
+ struct omap_device_pm_latency *pm_lats;
+ u32 dev_wakeup_lat;
+ u32 _dev_wakeup_lat_limit;
+ u8 pm_lats_cnt;
+ s8 pm_lat_level;
+ u8 hwmods_cnt;
+ u8 _state;
+ u8 flags;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
+ struct omap_hwmod *oh, void *pdata,
+ int pdata_len,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt, int is_early_device);
+
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+ struct omap_hwmod **oh, int oh_cnt,
+ void *pdata, int pdata_len,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt, int is_early_device);
+
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+void omap_device_delete(struct omap_device *od);
+int omap_device_register(struct platform_device *pdev);
+
+void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+ u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+int omap_device_get_context_loss_count(struct platform_device *pdev);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+ u32 deactivate_lat;
+ u32 deactivate_lat_worst;
+ int (*deactivate_func)(struct omap_device *od);
+ u32 activate_lat;
+ u32 activate_lat_worst;
+ int (*activate_func)(struct omap_device *od);
+ u32 flags;
+};
+
+#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
+
+/* Get omap_device pointer from platform_device pointer */
+static inline struct omap_device *to_omap_device(struct platform_device *pdev)
+{
+ return pdev ? pdev->archdata.od : NULL;
+}
+
+static inline
+void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
+{
+ struct omap_device *od = to_omap_device(pdev);
+
+ od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap_hwmod.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap_hwmod.h
new file mode 100644
index 0000000..3f26db4
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -0,0 +1,622 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoît Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ * Copious documentation and references can also be found in the
+ * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
+ * writing).
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ * - move Linux-specific data ("non-ROM data") out
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <plat/cpu.h>
+
+struct omap_device;
+
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
+ * with the original PRCM protocol defined for OMAP2420
+ */
+#define SYSC_TYPE1_MIDLEMODE_SHIFT 12
+#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_SHIFT 3
+#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2
+#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_SHIFT 1
+#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_SHIFT 0
+#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
+ * with the new PRCM protocol defined for new OMAP4 IPs.
+ */
+#define SYSC_TYPE2_SOFTRESET_SHIFT 0
+#define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
+#define SYSC_TYPE2_SIDLEMODE_SHIFT 2
+#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
+#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
+#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT 0
+#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE (1 << 0)
+#define HWMOD_IDLEMODE_NO (1 << 1)
+#define HWMOD_IDLEMODE_SMART (1 << 2)
+#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3)
+
+/* modulemode control type (SW or HW) */
+#define MODULEMODE_HWCTRL 1
+#define MODULEMODE_SWCTRL 2
+
+
+/**
+ * struct omap_hwmod_mux_info - hwmod specific mux configuration
+ * @pads: array of omap_device_pad entries
+ * @nr_pads: number of omap_device_pad entries
+ *
+ * Note that this is currently built during init as needed.
+ */
+struct omap_hwmod_mux_info {
+ int nr_pads;
+ struct omap_device_pad *pads;
+ int nr_pads_dynamic;
+ struct omap_device_pad **pads_dynamic;
+ int *irqs;
+ bool enabled;
+};
+
+/**
+ * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
+ * @name: name of the IRQ channel (module local name)
+ * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
+ *
+ * @name should be something short, e.g., "tx" or "rx". It is for use
+ * by platform_get_resource_byname(). It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_irq_info {
+ const char *name;
+ s16 irq;
+};
+
+/**
+ * struct omap_hwmod_dma_info - DMA channels used by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
+ *
+ * @name should be something short, e.g., "tx" or "rx". It is for use
+ * by platform_get_resource_byname(). It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+ const char *name;
+ s16 dma_req;
+};
+
+/**
+ * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
+ * @name: name of the reset line (module local name)
+ * @rst_shift: Offset of the reset bit
+ * @st_shift: Offset of the reset status bit (OMAP2/3 only)
+ *
+ * @name should be something short, e.g., "cpu0" or "rst". It is defined
+ * locally to the hwmod.
+ */
+struct omap_hwmod_rst_info {
+ const char *name;
+ u8 rst_shift;
+ u8 st_shift;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clk: opt clock: OMAP clock name
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+ const char *role;
+ const char *clk;
+ struct clk *_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3 (1 << 0)
+#define OMAP_FIREWALL_L4 (1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+ u8 l3_perm_bit;
+ u8 l4_fw_region;
+ u8 l4_prot_group;
+ u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */
+#define ADDR_TYPE_RT (1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - address space handled by the hwmod
+ * @name: name of the address space
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure. GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+ const char *name;
+ u32 pa_start;
+ u32 pa_end;
+ u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod. Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU (1 << 0)
+#define OCP_USER_SDMA (1 << 1)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_SWSUP_IDLE (1 << 0)
+#define OCPIF_CAN_BURST (1 << 1)
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clk: interface clock: OMAP clock name
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @width: OCP data width
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+ struct omap_hwmod *master;
+ struct omap_hwmod *slave;
+ struct omap_hwmod_addr_space *addr;
+ const char *clk;
+ struct clk *_clk;
+ union {
+ struct omap_hwmod_omap2_firewall omap2;
+ } fw;
+ u8 width;
+ u8 user;
+ u8 flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT 4
+#define SLAVE_IDLE_SHIFT 0
+#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE (1 << 0)
+#define SYSC_HAS_SOFTRESET (1 << 1)
+#define SYSC_HAS_ENAWAKEUP (1 << 2)
+#define SYSC_HAS_EMUFREE (1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY (1 << 4)
+#define SYSC_HAS_SIDLEMODE (1 << 5)
+#define SYSC_HAS_MIDLEMODE (1 << 6)
+#define SYSS_HAS_RESET_STATUS (1 << 7)
+#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
+#define SYSC_HAS_RESET_STATUS (1 << 9)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH 0x0
+#define CLOCKACT_TEST_MAIN 0x1
+#define CLOCKACT_TEST_ICLK 0x2
+#define CLOCKACT_TEST_NONE 0x3
+
+/**
+ * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
+ * @midle_shift: Offset of the midle bit
+ * @clkact_shift: Offset of the clockactivity bit
+ * @sidle_shift: Offset of the sidle bit
+ * @enwkup_shift: Offset of the enawakeup bit
+ * @srst_shift: Offset of the softreset bit
+ * @autoidle_shift: Offset of the autoidle bit
+ */
+struct omap_hwmod_sysc_fields {
+ u8 midle_shift;
+ u8 clkact_shift;
+ u8 sidle_shift;
+ u8 enwkup_shift;
+ u8 srst_shift;
+ u8 autoidle_shift;
+};
+
+/**
+ * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module. Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact. This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ * @sysc_fields: structure containing the offset positions of various bits in
+ * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
+ * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
+ * whether the device ip is compliant with the original PRCM protocol
+ * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
+ * If the device follows a different scheme for the sysconfig register ,
+ * then this field has to be populated with the correct offset structure.
+ */
+struct omap_hwmod_class_sysconfig {
+ u16 rev_offs;
+ u16 sysc_offs;
+ u16 syss_offs;
+ u16 sysc_flags;
+ struct omap_hwmod_sysc_fields *sysc_fields;
+ u8 srst_udelay;
+ u8 idlemodes;
+ u8 clockact;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers. In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+ s16 module_offs;
+ u8 prcm_reg_id;
+ u8 module_bit;
+ u8 idlest_reg_id;
+ u8 idlest_idle_bit;
+ u8 idlest_stdby_bit;
+};
+
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @clkctrl_reg: PRCM address of the clock control register
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ */
+struct omap_hwmod_omap4_prcm {
+ u16 clkctrl_offs;
+ u16 rstctrl_offs;
+ u16 context_offs;
+ u8 submodule_wkdep_bit;
+ u8 modulemode;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ * of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ * of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ * SDRAM controller, etc. XXX probably belongs outside the main hwmod file
+ * XXX Should be HWMOD_SETUP_NO_RESET
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ * controller, etc. XXX probably belongs outside the main hwmod file
+ * XXX Should be HWMOD_SETUP_NO_IDLE
+ * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ * when module is enabled, rather than the default, which is to
+ * enable autoidle
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
+ * only for few initiator modules on OMAP2 & 3.
+ * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
+ * This is needed for devices like DSS that require optional clocks enabled
+ * in order to complete the reset. Optional clocks will be disabled
+ * again after the reset.
+ * HWMOD_16BIT_REG: Module has 16bit registers
+ */
+#define HWMOD_SWSUP_SIDLE (1 << 0)
+#define HWMOD_SWSUP_MSTANDBY (1 << 1)
+#define HWMOD_INIT_NO_RESET (1 << 2)
+#define HWMOD_INIT_NO_IDLE (1 << 3)
+#define HWMOD_NO_OCP_AUTOIDLE (1 << 4)
+#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5)
+#define HWMOD_NO_IDLEST (1 << 6)
+#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
+#define HWMOD_16BIT_REG (1 << 8)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
+ * causes the first call to _enable() to only update the pinmux
+ */
+#define _HWMOD_NO_MPU_PORT (1 << 0)
+#define _HWMOD_WAKEUP_ENABLED (1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
+#define _HWMOD_SKIP_ENABLE (1 << 3)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ * (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN 0
+#define _HWMOD_STATE_REGISTERED 1
+#define _HWMOD_STATE_CLKS_INITED 2
+#define _HWMOD_STATE_INITIALIZED 3
+#define _HWMOD_STATE_ENABLED 4
+#define _HWMOD_STATE_IDLE 5
+#define _HWMOD_STATE_DISABLED 6
+
+/**
+ * struct omap_hwmod_class - the type of an IP block
+ * @name: name of the hwmod_class
+ * @sysc: device SYSCONFIG/SYSSTATUS register data
+ * @rev: revision of the IP class
+ * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
+ * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
+ *
+ * Represent the class of a OMAP hardware "modules" (e.g. timer,
+ * smartreflex, gpio, uart...)
+ *
+ * @pre_shutdown is a function that will be run immediately before
+ * hwmod clocks are disabled, etc. It is intended for use for hwmods
+ * like the MPU watchdog, which cannot be disabled with the standard
+ * omap_hwmod_shutdown(). The function should return 0 upon success,
+ * or some negative error upon failure. Returning an error will cause
+ * omap_hwmod_shutdown() to abort the device shutdown and return an
+ * error.
+ *
+ * If @reset is defined, then the function it points to will be
+ * executed in place of the standard hwmod _reset() code in
+ * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have
+ * unusual reset sequences - usually processor IP blocks like the IVA.
+ */
+struct omap_hwmod_class {
+ const char *name;
+ struct omap_hwmod_class_sysconfig *sysc;
+ u32 rev;
+ int (*pre_shutdown)(struct omap_hwmod *oh);
+ int (*reset)(struct omap_hwmod *oh);
+};
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @class: struct omap_hwmod_class * to the class of this hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs
+ * @sdma_reqs: ptr to an array of System DMA request IDs
+ * @prcm: PRCM data pertaining to this hwmod
+ * @main_clk: main clock: OMAP clock name
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @voltdm: pointer to voltage domain (filled in at runtime)
+ * @masters: ptr to array of OCP ifs that this hwmod can initiate on
+ * @slaves: ptr to array of OCP ifs that this hwmod can respond on
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_mpu_rt_va: cached register target start address (internal use)
+ * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
+ * @flags: hwmod flags (documented below)
+ * @_lock: spinlock serializing operations on this hwmod
+ * @node: list node for hwmod list (internal use)
+ *
+ * @main_clk refers to this module's "main clock," which for our
+ * purposes is defined as "the functional clock needed for register
+ * accesses to complete." Modules may not have a main clock if the
+ * interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod {
+ const char *name;
+ struct omap_hwmod_class *class;
+ struct omap_device *od;
+ struct omap_hwmod_mux_info *mux;
+ struct omap_hwmod_irq_info *mpu_irqs;
+ struct omap_hwmod_dma_info *sdma_reqs;
+ struct omap_hwmod_rst_info *rst_lines;
+ union {
+ struct omap_hwmod_omap2_prcm omap2;
+ struct omap_hwmod_omap4_prcm omap4;
+ } prcm;
+ const char *main_clk;
+ struct clk *_clk;
+ struct omap_hwmod_opt_clk *opt_clks;
+ char *clkdm_name;
+ struct clockdomain *clkdm;
+ struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
+ struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
+ void *dev_attr;
+ u32 _sysc_cache;
+ void __iomem *_mpu_rt_va;
+ spinlock_t _lock;
+ struct list_head node;
+ u16 flags;
+ u8 _mpu_port_index;
+ u8 response_lat;
+ u8 rst_lines_cnt;
+ u8 opt_clks_cnt;
+ u8 masters_cnt;
+ u8 slaves_cnt;
+ u8 hwmods_cnt;
+ u8 _int_flags;
+ u8 _state;
+ u8 _postsetup_state;
+};
+
+int omap_hwmod_register(struct omap_hwmod **ohs);
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+ void *data);
+
+int __init omap_hwmod_setup_one(const char *name);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int _omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int _omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
+int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
+int omap_hwmod_softreset(struct omap_hwmod *oh);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+ struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+ struct omap_hwmod *init_oh);
+
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+int omap_hwmod_for_each_by_class(const char *classname,
+ int (*fn)(struct omap_hwmod *oh,
+ void *user),
+ void *user);
+
+int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+
+int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+
+int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
+
+/*
+ * Chip variant-specific hwmod init routines - XXX should be converted
+ * to use initcalls once the initial boot ordering is straightened out
+ */
+extern int omap2420_hwmod_init(void);
+extern int omap2430_hwmod_init(void);
+extern int omap3xxx_hwmod_init(void);
+extern int omap44xx_hwmod_init(void);
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/onenand.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/onenand.h
new file mode 100644
index 0000000..2858667
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/onenand.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define ONENAND_SYNC_READ (1 << 0)
+#define ONENAND_SYNC_READWRITE (1 << 1)
+
+struct onenand_freq_info {
+ u16 maf_id;
+ u16 dev_id;
+ u16 ver_id;
+};
+
+struct omap_onenand_platform_data {
+ int cs;
+ int gpio_irq;
+ struct mtd_partition *parts;
+ int nr_parts;
+ int (*onenand_setup)(void __iomem *, int *freq_ptr);
+ int (*get_freq)(const struct onenand_freq_info *freq_info,
+ bool *clk_dep);
+ int dma_channel;
+ u8 flags;
+ u8 regulator_can_sleep;
+ u8 skip_initial_unlocking;
+};
+
+#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/param.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/param.h
new file mode 100644
index 0000000..1eb4dc3
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/param.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/prcm.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/prcm.h
new file mode 100644
index 0000000..267f43b
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/prcm.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem,
+ * so this file doesn't belong in plat-omap/include/plat. Please
+ * do not add anything new to this file.
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
+#define __ASM_ARM_ARCH_OMAP_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+ const char *name);
+
+#endif
+
+
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/remoteproc.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/remoteproc.h
new file mode 100644
index 0000000..b10eac8
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/remoteproc.h
@@ -0,0 +1,57 @@
+/*
+ * Remote Processor - omap-specific bits
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_REMOTEPROC_H
+#define _PLAT_REMOTEPROC_H
+
+struct rproc_ops;
+struct platform_device;
+
+/*
+ * struct omap_rproc_pdata - omap remoteproc's platform data
+ * @name: the remoteproc's name
+ * @oh_name: omap hwmod device
+ * @oh_name_opt: optional, secondary omap hwmod device
+ * @firmware: name of firmware file to load
+ * @mbox_name: name of omap mailbox device to use with this rproc
+ * @ops: start/stop rproc handlers
+ * @device_enable: omap-specific handler for enabling a device
+ * @device_shutdown: omap-specific handler for shutting down a device
+ */
+struct omap_rproc_pdata {
+ const char *name;
+ const char *oh_name;
+ const char *oh_name_opt;
+ const char *firmware;
+ const char *mbox_name;
+ const struct rproc_ops *ops;
+ int (*device_enable) (struct platform_device *pdev);
+ int (*device_shutdown) (struct platform_device *pdev);
+};
+
+#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
+
+void __init omap_rproc_reserve_cma(void);
+
+#else
+
+void __init omap_rproc_reserve_cma(void)
+{
+}
+
+#endif
+
+#endif /* _PLAT_REMOTEPROC_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/sdrc.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/sdrc.h
new file mode 100644
index 0000000..9bb978e
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/sdrc.h
@@ -0,0 +1,164 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG 0x010
+#define SDRC_CS_CFG 0x040
+#define SDRC_SHARING 0x044
+#define SDRC_ERR_TYPE 0x04C
+#define SDRC_DLLA_CTRL 0x060
+#define SDRC_DLLA_STATUS 0x064
+#define SDRC_DLLB_CTRL 0x068
+#define SDRC_DLLB_STATUS 0x06C
+#define SDRC_POWER 0x070
+#define SDRC_MCFG_0 0x080
+#define SDRC_MR_0 0x084
+#define SDRC_EMR2_0 0x08c
+#define SDRC_ACTIM_CTRL_A_0 0x09c
+#define SDRC_ACTIM_CTRL_B_0 0x0a0
+#define SDRC_RFR_CTRL_0 0x0a4
+#define SDRC_MANUAL_0 0x0a8
+#define SDRC_MCFG_1 0x0B0
+#define SDRC_MR_1 0x0B4
+#define SDRC_EMR2_1 0x0BC
+#define SDRC_ACTIM_CTRL_A_1 0x0C4
+#define SDRC_ACTIM_CTRL_B_1 0x0C8
+#define SDRC_RFR_CTRL_1 0x0D4
+#define SDRC_MANUAL_1 0x0D8
+
+#define SDRC_POWER_AUTOCOUNT_SHIFT 8
+#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT 4
+#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+#define OMAP242X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG 0x010
+#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context)
+#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context)
+/* REVISIT: fill in other SMS registers here */
+
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip. These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files. The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+ unsigned long rate;
+ u32 actim_ctrla;
+ u32 actim_ctrlb;
+ u32 rfr_ctrl;
+ u32 mr;
+};
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx);
+void omap2_sms_write_rot_size(u32 val, unsigned ctx);
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
+
+#ifdef CONFIG_ARCH_OMAP2
+
+struct memory_timings {
+ u32 m_type; /* ddr = 1, sdr = 0 */
+ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
+ u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
+ u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
+ u32 base_cs; /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif /* CONFIG_ARCH_OMAP2 */
+
+#endif /* __ASSEMBLER__ */
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/serial.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/serial.h
new file mode 100644
index 0000000..b073e5f
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/serial.h
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE 0x4806a000
+#define OMAP2_UART2_BASE 0x4806c000
+#define OMAP2_UART3_BASE 0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE 0x49020000
+#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE 0x48020000
+#define OMAP4_UART4_BASE 0x4806e000
+
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE 0x48020000
+#define TI81XX_UART2_BASE 0x48022000
+#define TI81XX_UART3_BASE 0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE 0x10000000
+#define ZOOM_UART_VIRT 0xfa400000
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+#define ZOOM_PORT_SHIFT 1
+
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+#define OMAP24XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+#define OMAP2UART1 21
+#define OMAP2UART2 22
+#define OMAP2UART3 23
+#define OMAP3UART1 OMAP2UART1
+#define OMAP3UART2 OMAP2UART2
+#define OMAP3UART3 33
+#define OMAP3UART4 34 /* Only on 36xx */
+#define OMAP4UART1 OMAP2UART1
+#define OMAP4UART2 OMAP2UART2
+#define OMAP4UART3 43
+#define OMAP4UART4 44
+#define TI81XXUART1 81
+#define TI81XXUART2 82
+#define TI81XXUART3 83
+#define ZOOM_UART 95 /* Only on zoom2/3 */
+
+/* This is only used by 8250.c for omap1510 */
+#define is_omap_port(pt) ({int __ret = 0; \
+ if ((pt)->port.mapbase == OMAP1_UART1_BASE || \
+ (pt)->port.mapbase == OMAP1_UART2_BASE || \
+ (pt)->port.mapbase == OMAP1_UART3_BASE) \
+ __ret = 1; \
+ __ret; \
+ })
+
+#ifndef __ASSEMBLER__
+
+struct omap_board_data;
+struct omap_uart_port_info;
+
+extern void omap_serial_init(void);
+extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
+extern void omap_serial_init_port(struct omap_board_data *bdata,
+ struct omap_uart_port_info *platform_data);
+#endif
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/sram.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/sram.h
new file mode 100644
index 0000000..227ae26
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/sram.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+#ifndef __ASSEMBLY__
+#include <asm/fncpy.h>
+
+extern void *omap_sram_push_address(unsigned long size);
+
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({ \
+ typeof(&(funcp)) _res = NULL; \
+ void *_sram_address = omap_sram_push_address(size); \
+ if (_sram_address) \
+ _res = fncpy(_sram_address, &(funcp), size); \
+ _res; \
+})
+
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA 0x40304000
+#define OMAP4_SRAM_VA 0xfe404000
+#else
+#define OMAP4_SRAM_PA 0x40300000
+#endif
+#define AM33XX_SRAM_PA 0x40300000
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/tc.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/tc.h
new file mode 100644
index 0000000..1b4b2da
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/tc.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE 0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG (TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20)
+#define EMIFF_MRS (TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1 (TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3 (TCMIF_BASE + 0x30)
+#define TC_ENDIANISM (TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40)
+#define EMIFS_ACS0 (TCMIF_BASE + 0x50)
+#define EMIFS_ACS1 (TCMIF_BASE + 0x54)
+#define EMIFS_ACS2 (TCMIF_BASE + 0x58)
+#define EMIFS_ACS3 (TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define OMAP_CS0_PHYS 0x00000000
+#define OMAP_CS0_SIZE SZ_64M
+
+#define OMAP_CS1_PHYS 0x04000000
+#define OMAP_CS1_SIZE SZ_64M
+
+#define OMAP_CS1A_PHYS OMAP_CS1_PHYS
+#define OMAP_CS1A_SIZE SZ_32M
+
+#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define OMAP_CS1B_SIZE SZ_32M
+
+#define OMAP_CS2_PHYS 0x08000000
+#define OMAP_CS2_SIZE SZ_64M
+
+#define OMAP_CS2A_PHYS OMAP_CS2_PHYS
+#define OMAP_CS2A_SIZE SZ_32M
+
+#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define OMAP_CS2B_SIZE SZ_32M
+
+#define OMAP_CS3_PHYS 0x0c000000
+#define OMAP_CS3_SIZE SZ_64M
+
+#ifndef __ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR (1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE (1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2)
+#define OMAP_EMIFS_CONFIG_BM (1 << 1)
+#define OMAP_EMIFS_CONFIG_WP (1 << 0)
+
+#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* __ASM_ARCH_TC_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/ti81xx.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/ti81xx.h
new file mode 100644
index 0000000..8f9843f
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/ti81xx.h
@@ -0,0 +1,27 @@
+/*
+ * This file contains the address data for various TI81XX modules.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TI81XX_H
+#define __ASM_ARCH_TI81XX_H
+
+#define L4_SLOW_TI81XX_BASE 0x48000000
+
+#define TI81XX_SCM_BASE 0x48140000
+#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
+#define TI81XX_PRCM_BASE 0x48180000
+
+#define TI81XX_ARM_INTC_BASE 0x48200000
+
+#endif /* __ASM_ARCH_TI81XX_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/timex.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/timex.h
new file mode 100644
index 0000000..6d35767
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/timex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ)
+#else
+#define CLOCK_TICK_RATE (HZ * 100000UL)
+#endif
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/uncompress.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/uncompress.h
new file mode 100644
index 0000000..cc3f11b
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/uncompress.h
@@ -0,0 +1,194 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include <plat/serial.h>
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP7XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP1UART##p)
+
+#define DEBUG_LL_OMAP2(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP4UART##p)
+
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach) \
+ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+#define DEBUG_LL_TI81XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI81XXUART##p)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap7xx/8xx based boards using UART1 with shift 0 */
+ DEBUG_LL_OMAP7XX(1, herald);
+ DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+ /* omap15xx/16xx based boards using UART1 */
+ DEBUG_LL_OMAP1(1, ams_delta);
+ DEBUG_LL_OMAP1(1, nokia770);
+ DEBUG_LL_OMAP1(1, omap_h2);
+ DEBUG_LL_OMAP1(1, omap_h3);
+ DEBUG_LL_OMAP1(1, omap_innovator);
+ DEBUG_LL_OMAP1(1, omap_osk);
+ DEBUG_LL_OMAP1(1, omap_palmte);
+ DEBUG_LL_OMAP1(1, omap_palmz71);
+
+ /* omap15xx/16xx based boards using UART2 */
+ DEBUG_LL_OMAP1(2, omap_palmtt);
+
+ /* omap15xx/16xx based boards using UART3 */
+ DEBUG_LL_OMAP1(3, sx1);
+
+ /* omap2 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap_2430sdp);
+ DEBUG_LL_OMAP2(1, omap_apollon);
+ DEBUG_LL_OMAP2(1, omap_h4);
+
+ /* omap2 based boards using UART3 */
+ DEBUG_LL_OMAP2(3, nokia_n800);
+ DEBUG_LL_OMAP2(3, nokia_n810);
+ DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+ /* omap3 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap3evm);
+ DEBUG_LL_OMAP3(1, omap_3430sdp);
+ DEBUG_LL_OMAP3(1, omap_3630sdp);
+ DEBUG_LL_OMAP3(1, omap3530_lv_som);
+ DEBUG_LL_OMAP3(1, omap3_torpedo);
+
+ /* omap3 based boards using UART3 */
+ DEBUG_LL_OMAP3(3, cm_t35);
+ DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
+ DEBUG_LL_OMAP3(3, craneboard);
+ DEBUG_LL_OMAP3(3, devkit8000);
+ DEBUG_LL_OMAP3(3, igep0020);
+ DEBUG_LL_OMAP3(3, igep0030);
+ DEBUG_LL_OMAP3(3, nokia_rm680);
+ DEBUG_LL_OMAP3(3, nokia_rm696);
+ DEBUG_LL_OMAP3(3, nokia_rx51);
+ DEBUG_LL_OMAP3(3, omap3517evm);
+ DEBUG_LL_OMAP3(3, omap3_beagle);
+ DEBUG_LL_OMAP3(3, omap3_pandora);
+ DEBUG_LL_OMAP3(3, omap_ldp);
+ DEBUG_LL_OMAP3(3, overo);
+ DEBUG_LL_OMAP3(3, touchbook);
+
+ /* omap4 based boards using UART3 */
+ DEBUG_LL_OMAP4(3, omap_4430sdp);
+ DEBUG_LL_OMAP4(3, omap4_panda);
+
+ /* zoom2/3 external uart */
+ DEBUG_LL_ZOOM(omap_zoom2);
+ DEBUG_LL_ZOOM(omap_zoom3);
+
+ /* TI8168 base boards using UART3 */
+ DEBUG_LL_TI81XX(3, ti8168evm);
+
+ /* TI8148 base boards using UART1 */
+ DEBUG_LL_TI81XX(1, ti8148evm);
+
+ } while (0);
+}
+
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/usb.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/usb.h
new file mode 100644
index 0000000..762eeb0
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/usb.h
@@ -0,0 +1,365 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef __ASM_ARCH_OMAP_USB_H
+#define __ASM_ARCH_OMAP_USB_H
+
+#include <linux/io.h>
+#include <linux/usb/musb.h>
+#include <plat/board.h>
+
+#define OMAP3_HS_USB_PORTS 3
+
+enum usbhs_omap_port_mode {
+ OMAP_USBHS_PORT_MODE_UNUSED,
+ OMAP_EHCI_PORT_MODE_PHY,
+ OMAP_EHCI_PORT_MODE_TLL,
+ OMAP_EHCI_PORT_MODE_HSIC,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
+};
+
+struct usbhs_omap_board_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ /* have to be valid if phy_reset is true and portx is in phy mode */
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+ /* Set this to true for ES2.x silicon */
+ unsigned es2_compatibility:1;
+
+ unsigned phy_reset:1;
+
+ /*
+ * Regulators for USB PHYs.
+ * Each PHY can have a separate regulator.
+ */
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+};
+
+struct ehci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+ unsigned phy_reset:1;
+};
+
+struct ohci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ unsigned es2_compatibility:1;
+};
+
+struct usbhs_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ struct ehci_hcd_omap_platform_data *ehci_data;
+ struct ohci_hcd_omap_platform_data *ohci_data;
+};
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE 0xfffb0400
+#define OMAP1_UDC_BASE 0xfffb4000
+#define OMAP1_OHCI_BASE 0xfffba000
+
+#define OMAP2_OHCI_BASE 0x4805e000
+#define OMAP2_UDC_BASE 0x4805e200
+#define OMAP2_OTG_BASE 0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE OMAP1_OTG_BASE
+#define UDC_BASE OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE OMAP2_OTG_BASE
+#define UDC_BASE OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
+
+struct omap_musb_board_data {
+ u8 interface_type;
+ u8 mode;
+ u16 power;
+ unsigned extvbus:1;
+ void (*set_phy_power)(u8 on);
+ void (*clear_irq)(void);
+ void (*set_mode)(u8 mode);
+ void (*reset)(void);
+};
+
+enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern int omap4430_phy_power(struct device *dev, int ID, int on);
+extern int omap4430_phy_set_clk(struct device *dev, int on);
+extern int omap4430_phy_init(struct device *dev);
+extern int omap4430_phy_exit(struct device *dev);
+extern int omap4430_phy_suspend(struct device *dev, int suspend);
+
+/*
+ * NOTE: Please update omap USB drivers to use ioremap + read/write
+ */
+
+#define OMAP2_L4_IO_OFFSET 0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET)
+
+static inline u8 omap_readb(u32 pa)
+{
+ return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u16 omap_readw(u32 pa)
+{
+ return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u32 omap_readl(u32 pa)
+{
+ return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writeb(u8 v, u32 pa)
+{
+ __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+
+static inline void omap_writew(u16 v, u32 pa)
+{
+ __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writel(u32 v, u32 pa)
+{
+ __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+#endif
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
+
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef CONFIG_USB_GADGET_OMAP
+#define is_usb0_device(config) 1
+#else
+#define is_usb0_device(config) 0
+#endif
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
+void omap2_usbfs_init(struct omap_usb_config *pdata);
+#else
+static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV (OTG_BASE + 0x00)
+#define OTG_SYSCON_1 (OTG_BASE + 0x04)
+# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
+# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
+# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
+# define OTG_IDLE_EN (1 << 15)
+# define HST_IDLE_EN (1 << 14)
+# define DEV_IDLE_EN (1 << 13)
+# define OTG_RESET_DONE (1 << 2)
+# define OTG_SOFT_RESET (1 << 1)
+#define OTG_SYSCON_2 (OTG_BASE + 0x08)
+# define OTG_EN (1 << 31)
+# define USBX_SYNCHRO (1 << 30)
+# define OTG_MST16 (1 << 29)
+# define SRP_GPDATA (1 << 28)
+# define SRP_GPDVBUS (1 << 27)
+# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
+# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
+# define B_ASE_BRST(w) (((w)>>16)&0x07)
+# define SRP_DPW (1 << 14)
+# define SRP_DATA (1 << 13)
+# define SRP_VBUS (1 << 12)
+# define OTG_PADEN (1 << 10)
+# define HMC_PADEN (1 << 9)
+# define UHOST_EN (1 << 8)
+# define HMC_TLLSPEED (1 << 7)
+# define HMC_TLLATTACH (1 << 6)
+# define OTG_HMC(w) (((w)>>0)&0x3f)
+#define OTG_CTRL (OTG_BASE + 0x0c)
+# define OTG_USB2_EN (1 << 29)
+# define OTG_USB2_DP (1 << 28)
+# define OTG_USB2_DM (1 << 27)
+# define OTG_USB1_EN (1 << 26)
+# define OTG_USB1_DP (1 << 25)
+# define OTG_USB1_DM (1 << 24)
+# define OTG_USB0_EN (1 << 23)
+# define OTG_USB0_DP (1 << 22)
+# define OTG_USB0_DM (1 << 21)
+# define OTG_ASESSVLD (1 << 20)
+# define OTG_BSESSEND (1 << 19)
+# define OTG_BSESSVLD (1 << 18)
+# define OTG_VBUSVLD (1 << 17)
+# define OTG_ID (1 << 16)
+# define OTG_DRIVER_SEL (1 << 15)
+# define OTG_A_SETB_HNPEN (1 << 12)
+# define OTG_A_BUSREQ (1 << 11)
+# define OTG_B_HNPEN (1 << 9)
+# define OTG_B_BUSREQ (1 << 8)
+# define OTG_BUSDROP (1 << 7)
+# define OTG_PULLDOWN (1 << 5)
+# define OTG_PULLUP (1 << 4)
+# define OTG_DRV_VBUS (1 << 3)
+# define OTG_PD_VBUS (1 << 2)
+# define OTG_PU_VBUS (1 << 1)
+# define OTG_PU_ID (1 << 0)
+#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
+# define DRIVER_SWITCH (1 << 15)
+# define A_VBUS_ERR (1 << 13)
+# define A_REQ_TMROUT (1 << 12)
+# define A_SRP_DETECT (1 << 11)
+# define B_HNP_FAIL (1 << 10)
+# define B_SRP_TMROUT (1 << 9)
+# define B_SRP_DONE (1 << 8)
+# define B_SRP_STARTED (1 << 7)
+# define OPRT_CHG (1 << 0)
+#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
+ // same bits as in IRQ_EN
+#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
+# define OTGVPD (1 << 14)
+# define OTGVPU (1 << 13)
+# define OTGPUID (1 << 12)
+# define USB2VDR (1 << 10)
+# define USB2PDEN (1 << 9)
+# define USB2PUEN (1 << 8)
+# define USB1VDR (1 << 6)
+# define USB1PDEN (1 << 5)
+# define USB1PUEN (1 << 4)
+# define USB0VDR (1 << 2)
+# define USB0PDEN (1 << 1)
+# define USB0PUEN (1 << 0)
+#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
+#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
+# define CONF_USB2_UNI_R (1 << 8)
+# define CONF_USB1_UNI_R (1 << 7)
+# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
+# define CONF_USB0_ISOLATE_R (1 << 3)
+# define CONF_USB_PWRDN_DM_R (1 << 2)
+# define CONF_USB_PWRDN_DP_R (1 << 1)
+
+/* OMAP2 */
+# define USB_UNIDIR 0x0
+# define USB_UNIDIR_TLL 0x1
+# define USB_BIDIR 0x2
+# define USB_BIDIR_TLL 0x3
+# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2)))
+# define USBT2TLL5PI (1 << 17)
+# define USB0PUENACTLOI (1 << 16)
+# define USBSTANDBYCTRL (1 << 15)
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE (1 << 23)
+#define CONF2_OTGMODE (3 << 14)
+#define CONF2_NO_OVERRIDE (0 << 14)
+#define CONF2_FORCE_HOST (1 << 14)
+#define CONF2_FORCE_DEVICE (2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN (1 << 13)
+#define CONF2_VBDTCTEN (1 << 12)
+#define CONF2_REFFREQ_24MHZ (2 << 8)
+#define CONF2_REFFREQ_26MHZ (7 << 8)
+#define CONF2_REFFREQ_13MHZ (6 << 8)
+#define CONF2_REFFREQ (0xf << 8)
+#define CONF2_PHYCLKGD (1 << 7)
+#define CONF2_VBUSSENSE (1 << 6)
+#define CONF2_PHY_PLLON (1 << 5)
+#define CONF2_RESET (1 << 4)
+#define CONF2_PHYPWRDN (1 << 3)
+#define CONF2_OTGPWRDN (1 << 2)
+#define CONF2_DATPOL (1 << 1)
+
+/* TI81XX specific definitions */
+#define USBCTRL0 0x620
+#define USBSTAT0 0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_CHGDET_DIS (1 << 2)
+#define USBPHY_CHGDET_RSTRT (1 << 3)
+#define USBPHY_SRCONDM (1 << 4)
+#define USBPHY_SINKONDP (1 << 5)
+#define USBPHY_CHGISINK_EN (1 << 6)
+#define USBPHY_CHGVSRC_EN (1 << 7)
+#define USBPHY_DMPULLUP (1 << 8)
+#define USBPHY_DPPULLUP (1 << 9)
+#define USBPHY_CDET_EXTCTL (1 << 10)
+#define USBPHY_GPIO_MODE (1 << 12)
+#define USBPHY_DPOPBUFCTL (1 << 13)
+#define USBPHY_DMOPBUFCTL (1 << 14)
+#define USBPHY_DPINPUT (1 << 15)
+#define USBPHY_DMINPUT (1 << 16)
+#define USBPHY_DPGPIO_PD (1 << 17)
+#define USBPHY_DMGPIO_PD (1 << 18)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+#define USBPHY_DATA_POLARITY (1 << 23)
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
+u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
+u32 omap1_usb1_init(unsigned nwires);
+u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
+#else
+static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+ return 0;
+}
+static inline u32 omap1_usb1_init(unsigned nwires)
+{
+ return 0;
+
+}
+static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+ return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_OMAP_USB_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/voltage.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/voltage.h
new file mode 100644
index 0000000..0a6a482
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/voltage.h
@@ -0,0 +1,20 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/vram.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/vram.h
new file mode 100644
index 0000000..4d65b7d
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/vram.h
@@ -0,0 +1,43 @@
+/*
+ * VRAM manager for OMAP
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRAM_H__
+#define __OMAP_VRAM_H__
+
+#include <linux/types.h>
+
+extern int omap_vram_add_region(unsigned long paddr, size_t size);
+extern int omap_vram_free(unsigned long paddr, size_t size);
+extern int omap_vram_alloc(size_t size, unsigned long *paddr);
+extern int omap_vram_reserve(unsigned long paddr, size_t size);
+extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
+ unsigned long *largest_free_block);
+
+#ifdef CONFIG_OMAP2_VRAM
+extern void omap_vram_set_sdram_vram(u32 size, u32 start);
+
+extern void omap_vram_reserve_sdram_memblock(void);
+#else
+static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
+
+static inline void omap_vram_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/vrfb.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/vrfb.h
new file mode 100644
index 0000000..3792bde
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/include/plat/vrfb.h
@@ -0,0 +1,66 @@
+/*
+ * VRFB Rotation Engine
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRFB_H__
+#define __OMAP_VRFB_H__
+
+#define OMAP_VRFB_LINE_LEN 2048
+
+struct vrfb {
+ u8 context;
+ void __iomem *vaddr[4];
+ unsigned long paddr[4];
+ u16 xres;
+ u16 yres;
+ u16 xoffset;
+ u16 yoffset;
+ u8 bytespp;
+ bool yuv_mode;
+};
+
+#ifdef CONFIG_OMAP2_VRFB
+extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
+ u8 bytespp);
+extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
+extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
+extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+ u16 width, u16 height,
+ unsigned bytespp, bool yuv_mode);
+extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
+extern void omap_vrfb_restore_context(void);
+
+#else
+static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
+static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
+static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
+ u8 bytespp) {}
+static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp)
+ { return 0; }
+static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp)
+ { return 0; }
+static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+ u16 width, u16 height, unsigned bytespp, bool yuv_mode) {}
+static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot)
+ { return 0; }
+static inline void omap_vrfb_restore_context(void) {}
+#endif
+#endif /* __VRFB_H */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/mailbox.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/mailbox.c
new file mode 100644
index 0000000..ad32621
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/mailbox.c
@@ -0,0 +1,430 @@
+/*
+ * OMAP mailbox driver
+ *
+ * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/kfifo.h>
+#include <linux/err.h>
+#include <linux/notifier.h>
+#include <linux/module.h>
+
+#include <plat/mailbox.h>
+
+static struct omap_mbox **mboxes;
+
+static int mbox_configured;
+static DEFINE_MUTEX(mbox_configured_lock);
+
+static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE;
+module_param(mbox_kfifo_size, uint, S_IRUGO);
+MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)");
+
+/* Mailbox FIFO handle functions */
+static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_read(mbox);
+}
+static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+ mbox->ops->fifo_write(mbox, msg);
+}
+static inline int mbox_fifo_empty(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_empty(mbox);
+}
+static inline int mbox_fifo_full(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_full(mbox);
+}
+
+/* Mailbox IRQ handle functions */
+static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ if (mbox->ops->ack_irq)
+ mbox->ops->ack_irq(mbox, irq);
+}
+static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ return mbox->ops->is_irq(mbox, irq);
+}
+
+/*
+ * message sender
+ */
+static int __mbox_poll_for_space(struct omap_mbox *mbox)
+{
+ int ret = 0, i = 1000;
+
+ while (mbox_fifo_full(mbox)) {
+ if (mbox->ops->type == OMAP_MBOX_TYPE2)
+ return -1;
+ if (--i == 0)
+ return -1;
+ udelay(1);
+ }
+ return ret;
+}
+
+int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+ struct omap_mbox_queue *mq = mbox->txq;
+ int ret = 0, len;
+
+ spin_lock_bh(&mq->lock);
+
+ if (kfifo_avail(&mq->fifo) < sizeof(msg)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) {
+ mbox_fifo_write(mbox, msg);
+ goto out;
+ }
+
+ len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+ WARN_ON(len != sizeof(msg));
+
+ tasklet_schedule(&mbox->txq->tasklet);
+
+out:
+ spin_unlock_bh(&mq->lock);
+ return ret;
+}
+EXPORT_SYMBOL(omap_mbox_msg_send);
+
+static void mbox_tx_tasklet(unsigned long tx_data)
+{
+ struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
+ struct omap_mbox_queue *mq = mbox->txq;
+ mbox_msg_t msg;
+ int ret;
+
+ while (kfifo_len(&mq->fifo)) {
+ if (__mbox_poll_for_space(mbox)) {
+ omap_mbox_enable_irq(mbox, IRQ_TX);
+ break;
+ }
+
+ ret = kfifo_out(&mq->fifo, (unsigned char *)&msg,
+ sizeof(msg));
+ WARN_ON(ret != sizeof(msg));
+
+ mbox_fifo_write(mbox, msg);
+ }
+}
+
+/*
+ * Message receiver(workqueue)
+ */
+static void mbox_rx_work(struct work_struct *work)
+{
+ struct omap_mbox_queue *mq =
+ container_of(work, struct omap_mbox_queue, work);
+ mbox_msg_t msg;
+ int len;
+
+ while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
+ len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+ WARN_ON(len != sizeof(msg));
+
+ blocking_notifier_call_chain(&mq->mbox->notifier, len,
+ (void *)msg);
+ spin_lock_irq(&mq->lock);
+ if (mq->full) {
+ mq->full = false;
+ omap_mbox_enable_irq(mq->mbox, IRQ_RX);
+ }
+ spin_unlock_irq(&mq->lock);
+ }
+}
+
+/*
+ * Mailbox interrupt handler
+ */
+static void __mbox_tx_interrupt(struct omap_mbox *mbox)
+{
+ omap_mbox_disable_irq(mbox, IRQ_TX);
+ ack_mbox_irq(mbox, IRQ_TX);
+ tasklet_schedule(&mbox->txq->tasklet);
+}
+
+static void __mbox_rx_interrupt(struct omap_mbox *mbox)
+{
+ struct omap_mbox_queue *mq = mbox->rxq;
+ mbox_msg_t msg;
+ int len;
+
+ while (!mbox_fifo_empty(mbox)) {
+ if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
+ omap_mbox_disable_irq(mbox, IRQ_RX);
+ mq->full = true;
+ goto nomem;
+ }
+
+ msg = mbox_fifo_read(mbox);
+
+ len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+ WARN_ON(len != sizeof(msg));
+
+ if (mbox->ops->type == OMAP_MBOX_TYPE1)
+ break;
+ }
+
+ /* no more messages in the fifo. clear IRQ source. */
+ ack_mbox_irq(mbox, IRQ_RX);
+nomem:
+ schedule_work(&mbox->rxq->work);
+}
+
+static irqreturn_t mbox_interrupt(int irq, void *p)
+{
+ struct omap_mbox *mbox = p;
+
+ if (is_mbox_irq(mbox, IRQ_TX))
+ __mbox_tx_interrupt(mbox);
+
+ if (is_mbox_irq(mbox, IRQ_RX))
+ __mbox_rx_interrupt(mbox);
+
+ return IRQ_HANDLED;
+}
+
+static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
+ void (*work) (struct work_struct *),
+ void (*tasklet)(unsigned long))
+{
+ struct omap_mbox_queue *mq;
+
+ mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL);
+ if (!mq)
+ return NULL;
+
+ spin_lock_init(&mq->lock);
+
+ if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL))
+ goto error;
+
+ if (work)
+ INIT_WORK(&mq->work, work);
+
+ if (tasklet)
+ tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox);
+ return mq;
+error:
+ kfree(mq);
+ return NULL;
+}
+
+static void mbox_queue_free(struct omap_mbox_queue *q)
+{
+ kfifo_free(&q->fifo);
+ kfree(q);
+}
+
+static int omap_mbox_startup(struct omap_mbox *mbox)
+{
+ int ret = 0;
+ struct omap_mbox_queue *mq;
+
+ mutex_lock(&mbox_configured_lock);
+ if (!mbox_configured++) {
+ if (likely(mbox->ops->startup)) {
+ ret = mbox->ops->startup(mbox);
+ if (unlikely(ret))
+ goto fail_startup;
+ } else
+ goto fail_startup;
+ }
+
+ if (!mbox->use_count++) {
+ ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
+ mbox->name, mbox);
+ if (unlikely(ret)) {
+ pr_err("failed to register mailbox interrupt:%d\n",
+ ret);
+ goto fail_request_irq;
+ }
+ mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
+ if (!mq) {
+ ret = -ENOMEM;
+ goto fail_alloc_txq;
+ }
+ mbox->txq = mq;
+
+ mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
+ if (!mq) {
+ ret = -ENOMEM;
+ goto fail_alloc_rxq;
+ }
+ mbox->rxq = mq;
+ mq->mbox = mbox;
+ }
+ mutex_unlock(&mbox_configured_lock);
+ return 0;
+
+fail_alloc_rxq:
+ mbox_queue_free(mbox->txq);
+fail_alloc_txq:
+ free_irq(mbox->irq, mbox);
+fail_request_irq:
+ if (mbox->ops->shutdown)
+ mbox->ops->shutdown(mbox);
+ mbox->use_count--;
+fail_startup:
+ mbox_configured--;
+ mutex_unlock(&mbox_configured_lock);
+ return ret;
+}
+
+static void omap_mbox_fini(struct omap_mbox *mbox)
+{
+ mutex_lock(&mbox_configured_lock);
+
+ if (!--mbox->use_count) {
+ free_irq(mbox->irq, mbox);
+ tasklet_kill(&mbox->txq->tasklet);
+ flush_work_sync(&mbox->rxq->work);
+ mbox_queue_free(mbox->txq);
+ mbox_queue_free(mbox->rxq);
+ }
+
+ if (likely(mbox->ops->shutdown)) {
+ if (!--mbox_configured)
+ mbox->ops->shutdown(mbox);
+ }
+
+ mutex_unlock(&mbox_configured_lock);
+}
+
+struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
+{
+ struct omap_mbox *_mbox, *mbox = NULL;
+ int i, ret;
+
+ if (!mboxes)
+ return ERR_PTR(-EINVAL);
+
+ for (i = 0; (_mbox = mboxes[i]); i++) {
+ if (!strcmp(_mbox->name, name)) {
+ mbox = _mbox;
+ break;
+ }
+ }
+
+ if (!mbox)
+ return ERR_PTR(-ENOENT);
+
+ ret = omap_mbox_startup(mbox);
+ if (ret)
+ return ERR_PTR(-ENODEV);
+
+ if (nb)
+ blocking_notifier_chain_register(&mbox->notifier, nb);
+
+ return mbox;
+}
+EXPORT_SYMBOL(omap_mbox_get);
+
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb)
+{
+ blocking_notifier_chain_unregister(&mbox->notifier, nb);
+ omap_mbox_fini(mbox);
+}
+EXPORT_SYMBOL(omap_mbox_put);
+
+static struct class omap_mbox_class = { .name = "mbox", };
+
+int omap_mbox_register(struct device *parent, struct omap_mbox **list)
+{
+ int ret;
+ int i;
+
+ mboxes = list;
+ if (!mboxes)
+ return -EINVAL;
+
+ for (i = 0; mboxes[i]; i++) {
+ struct omap_mbox *mbox = mboxes[i];
+ mbox->dev = device_create(&omap_mbox_class,
+ parent, 0, mbox, "%s", mbox->name);
+ if (IS_ERR(mbox->dev)) {
+ ret = PTR_ERR(mbox->dev);
+ goto err_out;
+ }
+
+ BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier);
+ }
+ return 0;
+
+err_out:
+ while (i--)
+ device_unregister(mboxes[i]->dev);
+ return ret;
+}
+EXPORT_SYMBOL(omap_mbox_register);
+
+int omap_mbox_unregister(void)
+{
+ int i;
+
+ if (!mboxes)
+ return -EINVAL;
+
+ for (i = 0; mboxes[i]; i++)
+ device_unregister(mboxes[i]->dev);
+ mboxes = NULL;
+ return 0;
+}
+EXPORT_SYMBOL(omap_mbox_unregister);
+
+static int __init omap_mbox_init(void)
+{
+ int err;
+
+ err = class_register(&omap_mbox_class);
+ if (err)
+ return err;
+
+ /* kfifo size sanity check: alignment and minimal size */
+ mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
+ mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size,
+ sizeof(mbox_msg_t));
+
+ return 0;
+}
+subsys_initcall(omap_mbox_init);
+
+static void __exit omap_mbox_exit(void)
+{
+ class_unregister(&omap_mbox_class);
+}
+module_exit(omap_mbox_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
+MODULE_AUTHOR("Toshihiro Kobayashi");
+MODULE_AUTHOR("Hiroshi DOYU");
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/mux.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/mux.c
new file mode 100644
index 0000000..cff8712
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/mux.c
@@ -0,0 +1,90 @@
+/*
+ * linux/arch/arm/plat-omap/mux.c
+ *
+ * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+
+#include <plat/cpu.h>
+#include <plat/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+ if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+ || !arch_mux_cfg->cfg_reg) {
+ printk(KERN_ERR "Invalid pin table\n");
+ return -EINVAL;
+ }
+
+ mux_cfg = arch_mux_cfg;
+
+ return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+ struct pin_config *reg;
+
+ if (!cpu_class_is_omap1()) {
+ printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+ index);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ if (mux_cfg == NULL) {
+ printk(KERN_ERR "Pin mux table not initialized\n");
+ return -ENODEV;
+ }
+
+ if (index >= mux_cfg->size) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, mux_cfg->size);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ reg = (struct pin_config *)&mux_cfg->pins[index];
+
+ if (!mux_cfg->cfg_reg)
+ return -ENODEV;
+
+ return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x) do {} while(0)
+#endif /* CONFIG_OMAP_MUX */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/ocpi.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/ocpi.c
new file mode 100644
index 0000000..ebe0c73
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/ocpi.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/plat-omap/ocpi.c
+ *
+ * Minimal OCP bus support for omap16xx
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define OCPI_BASE 0xfffec320
+#define OCPI_FAULT (OCPI_BASE + 0x00)
+#define OCPI_CMD_FAULT (OCPI_BASE + 0x04)
+#define OCPI_SINT0 (OCPI_BASE + 0x08)
+#define OCPI_TABORT (OCPI_BASE + 0x0c)
+#define OCPI_SINT1 (OCPI_BASE + 0x10)
+#define OCPI_PROT (OCPI_BASE + 0x14)
+#define OCPI_SEC (OCPI_BASE + 0x18)
+
+/* USB OHCI OCPI access error registers */
+#define HOSTUEADDR 0xfffba0e0
+#define HOSTUESTATUS 0xfffba0e4
+
+static struct clk *ocpi_ck;
+
+/*
+ * Enables device access to OMAP buses via the OCPI bridge
+ * FIXME: Add locking
+ */
+int ocpi_enable(void)
+{
+ unsigned int val;
+
+ if (!cpu_is_omap16xx())
+ return -ENODEV;
+
+ /* Enable access for OHCI in OCPI */
+ val = omap_readl(OCPI_PROT);
+ val &= ~0xff;
+ //val &= (1 << 0); /* Allow access only to EMIFS */
+ omap_writel(val, OCPI_PROT);
+
+ val = omap_readl(OCPI_SEC);
+ val &= ~0xff;
+ omap_writel(val, OCPI_SEC);
+
+ return 0;
+}
+EXPORT_SYMBOL(ocpi_enable);
+
+static int __init omap_ocpi_init(void)
+{
+ if (!cpu_is_omap16xx())
+ return -ENODEV;
+
+ ocpi_ck = clk_get(NULL, "l3_ocpi_ck");
+ if (IS_ERR(ocpi_ck))
+ return PTR_ERR(ocpi_ck);
+
+ clk_enable(ocpi_ck);
+ ocpi_enable();
+ printk("OMAP OCPI interconnect driver loaded\n");
+
+ return 0;
+}
+
+static void __exit omap_ocpi_exit(void)
+{
+ /* REVISIT: Disable OCPI */
+
+ if (!cpu_is_omap16xx())
+ return;
+
+ clk_disable(ocpi_ck);
+ clk_put(ocpi_ck);
+}
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("OMAP OCPI bus controller module");
+MODULE_LICENSE("GPL");
+module_init(omap_ocpi_init);
+module_exit(omap_ocpi_exit);
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/omap-pm-noop.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/omap-pm-noop.c
new file mode 100644
index 0000000..5a97b4d
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/omap-pm-noop.c
@@ -0,0 +1,373 @@
+/*
+ * omap-pm-noop.c - OMAP power management interface - dummy version
+ *
+ * This code implements the OMAP power management interface to
+ * drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for
+ * debug/demonstration use, as it does nothing but printk() whenever a
+ * function is called (when DEBUG is defined, below)
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order):
+ * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
+ * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+/* Interface documentation is in mach/omap-pm.h */
+#include <plat/omap-pm.h>
+#include <plat/omap_device.h>
+
+static bool off_mode_enabled;
+static int dummy_context_loss_counter;
+
+/*
+ * Device-driver-originated constraints (via board-*.c files)
+ */
+
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+{
+ if (!dev || t < -1) {
+ WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+ return -EINVAL;
+ };
+
+ if (t == -1)
+ pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
+ "dev %s\n", dev_name(dev));
+ else
+ pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
+ "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+ /*
+ * For current Linux, this needs to map the MPU to a
+ * powerdomain, then go through the list of current max lat
+ * constraints on the MPU and find the smallest. If
+ * the latency constraint has changed, the code should
+ * recompute the state to enter for the next powerdomain
+ * state.
+ *
+ * TI CDP code can call constraint_set here.
+ */
+
+ return 0;
+}
+
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+{
+ if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
+ agent_id != OCP_TARGET_AGENT)) {
+ WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+ return -EINVAL;
+ };
+
+ if (r == 0)
+ pr_debug("OMAP PM: remove min bus tput constraint: "
+ "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+ else
+ pr_debug("OMAP PM: add min bus tput constraint: "
+ "dev %s for agent_id %d: rate %ld KiB\n",
+ dev_name(dev), agent_id, r);
+
+ /*
+ * This code should model the interconnect and compute the
+ * required clock frequency, convert that to a VDD2 OPP ID, then
+ * set the VDD2 OPP appropriately.
+ *
+ * TI CDP code can call constraint_set here on the VDD2 OPP.
+ */
+
+ return 0;
+}
+
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+ long t)
+{
+ if (!req_dev || !dev || t < -1) {
+ WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+ return -EINVAL;
+ };
+
+ if (t == -1)
+ pr_debug("OMAP PM: remove max device latency constraint: "
+ "dev %s\n", dev_name(dev));
+ else
+ pr_debug("OMAP PM: add max device latency constraint: "
+ "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+ /*
+ * For current Linux, this needs to map the device to a
+ * powerdomain, then go through the list of current max lat
+ * constraints on that powerdomain and find the smallest. If
+ * the latency constraint has changed, the code should
+ * recompute the state to enter for the next powerdomain
+ * state. Conceivably, this code should also determine
+ * whether to actually disable the device clocks or not,
+ * depending on how long it takes to re-enable the clocks.
+ *
+ * TI CDP code can call constraint_set here.
+ */
+
+ return 0;
+}
+
+int omap_pm_set_max_sdma_lat(struct device *dev, long t)
+{
+ if (!dev || t < -1) {
+ WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+ return -EINVAL;
+ };
+
+ if (t == -1)
+ pr_debug("OMAP PM: remove max DMA latency constraint: "
+ "dev %s\n", dev_name(dev));
+ else
+ pr_debug("OMAP PM: add max DMA latency constraint: "
+ "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+ /*
+ * For current Linux PM QOS params, this code should scan the
+ * list of maximum CPU and DMA latencies and select the
+ * smallest, then set cpu_dma_latency pm_qos_param
+ * accordingly.
+ *
+ * For future Linux PM QOS params, with separate CPU and DMA
+ * latency params, this code should just set the dma_latency param.
+ *
+ * TI CDP code can call constraint_set here.
+ */
+
+ return 0;
+}
+
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
+{
+ if (!dev || !c || r < 0) {
+ WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+ return -EINVAL;
+ }
+
+ if (r == 0)
+ pr_debug("OMAP PM: remove min clk rate constraint: "
+ "dev %s\n", dev_name(dev));
+ else
+ pr_debug("OMAP PM: add min clk rate constraint: "
+ "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+
+ /*
+ * Code in a real implementation should keep track of these
+ * constraints on the clock, and determine the highest minimum
+ * clock rate. It should iterate over each OPP and determine
+ * whether the OPP will result in a clock rate that would
+ * satisfy this constraint (and any other PM constraint in effect
+ * at that time). Once it finds the lowest-voltage OPP that
+ * meets those conditions, it should switch to it, or return
+ * an error if the code is not capable of doing so.
+ */
+
+ return 0;
+}
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+const struct omap_opp *omap_pm_dsp_get_opp_table(void)
+{
+ pr_debug("OMAP PM: DSP request for OPP table\n");
+
+ /*
+ * Return DSP frequency table here: The final item in the
+ * array should have .rate = .opp_id = 0.
+ */
+
+ return NULL;
+}
+
+void omap_pm_dsp_set_min_opp(u8 opp_id)
+{
+ if (opp_id == 0) {
+ WARN_ON(1);
+ return;
+ }
+
+ pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
+
+ /*
+ *
+ * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
+ * can just test to see which is higher, the CPU's desired OPP
+ * ID or the DSP's desired OPP ID, and use whichever is
+ * highest.
+ *
+ * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
+ * rate is keyed on MPU speed, not the OPP ID. So we need to
+ * map the OPP ID to the MPU speed for use with clk_set_rate()
+ * if it is higher than the current OPP clock rate.
+ *
+ */
+}
+
+
+u8 omap_pm_dsp_get_opp(void)
+{
+ pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
+
+ /*
+ * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
+ *
+ * CDP12.14+:
+ * Call clk_get_rate() on the OPP custom clock, map that to an
+ * OPP ID using the tables defined in board-*.c/chip-*.c files.
+ */
+
+ return 0;
+}
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
+{
+ pr_debug("OMAP PM: CPUFreq request for frequency table\n");
+
+ /*
+ * Return CPUFreq frequency table here: loop over
+ * all VDD1 clkrates, pull out the mpu_ck frequencies, build
+ * table
+ */
+
+ return NULL;
+}
+
+void omap_pm_cpu_set_freq(unsigned long f)
+{
+ if (f == 0) {
+ WARN_ON(1);
+ return;
+ }
+
+ pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
+ f);
+
+ /*
+ * For l-o dev tree, determine whether MPU freq or DSP OPP id
+ * freq is higher. Find the OPP ID corresponding to the
+ * higher frequency. Call clk_round_rate() and clk_set_rate()
+ * on the OPP custom clock.
+ *
+ * CDP should just be able to set the VDD1 OPP clock rate here.
+ */
+}
+
+unsigned long omap_pm_cpu_get_freq(void)
+{
+ pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
+
+ /*
+ * Call clk_get_rate() on the mpu_ck.
+ */
+
+ return 0;
+}
+
+/**
+ * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled
+ *
+ * Intended for use only by OMAP PM core code to notify this layer
+ * that off mode has been enabled.
+ */
+void omap_pm_enable_off_mode(void)
+{
+ off_mode_enabled = true;
+}
+
+/**
+ * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled
+ *
+ * Intended for use only by OMAP PM core code to notify this layer
+ * that off mode has been disabled.
+ */
+void omap_pm_disable_off_mode(void)
+{
+ off_mode_enabled = false;
+}
+
+/*
+ * Device context loss tracking
+ */
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int count;
+
+ if (WARN_ON(!dev))
+ return -ENODEV;
+
+ if (dev->pm_domain == &omap_device_pm_domain) {
+ count = omap_device_get_context_loss_count(pdev);
+ } else {
+ WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
+ dev_name(dev));
+
+ count = dummy_context_loss_counter;
+
+ if (off_mode_enabled) {
+ count++;
+ /*
+ * Context loss count has to be a non-negative value.
+ * Clear the sign bit to get a value range from 0 to
+ * INT_MAX.
+ */
+ count &= INT_MAX;
+ dummy_context_loss_counter = count;
+ }
+ }
+
+ pr_debug("OMAP PM: context loss count for dev %s = %d\n",
+ dev_name(dev), count);
+
+ return count;
+}
+
+#else
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+ return dummy_context_loss_counter;
+}
+
+#endif
+
+/* Should be called before clk framework init */
+int __init omap_pm_if_early_init(void)
+{
+ return 0;
+}
+
+/* Must be called after clock framework is initialized */
+int __init omap_pm_if_init(void)
+{
+ return 0;
+}
+
+void omap_pm_if_exit(void)
+{
+ /* Deallocate CPUFreq frequency table here */
+}
+
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/omap_device.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/omap_device.c
new file mode 100644
index 0000000..d50cbc6
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/omap_device.c
@@ -0,0 +1,1129 @@
+
+/*
+ * omap_device implementation
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Paul Walmsley, Kevin Hilman
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code provides a consistent interface for OMAP device drivers
+ * to control power management and interconnect properties of their
+ * devices.
+ *
+ * In the medium- to long-term, this code should either be
+ * a) implemented via arch-specific pointers in platform_data
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ * platform_data func pointers
+ *
+ *
+ * Guidelines for usage by driver authors:
+ *
+ * 1. These functions are intended to be used by device drivers via
+ * function pointers in struct platform_data. As an example,
+ * omap_device_enable() should be passed to the driver as
+ *
+ * struct foo_driver_platform_data {
+ * ...
+ * int (*device_enable)(struct platform_device *pdev);
+ * ...
+ * }
+ *
+ * Note that the generic "device_enable" name is used, rather than
+ * "omap_device_enable". This is so other architectures can pass in their
+ * own enable/disable functions here.
+ *
+ * This should be populated during device setup:
+ *
+ * ...
+ * pdata->device_enable = omap_device_enable;
+ * ...
+ *
+ * 2. Drivers should first check to ensure the function pointer is not null
+ * before calling it, as in:
+ *
+ * if (pdata->device_enable)
+ * pdata->device_enable(pdev);
+ *
+ * This allows other architectures that don't use similar device_enable()/
+ * device_shutdown() functions to execute normally.
+ *
+ * ...
+ *
+ * Suggested usage by device drivers:
+ *
+ * During device initialization:
+ * device_enable()
+ *
+ * During device idle:
+ * (save remaining device context if necessary)
+ * device_idle();
+ *
+ * During device resume:
+ * device_enable();
+ * (restore context if necessary)
+ *
+ * During device shutdown:
+ * device_shutdown()
+ * (device must be reinitialized at this point to use it again)
+ *
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
+#include <plat/clock.h>
+
+/* These parameters are passed to _omap_device_{de,}activate() */
+#define USE_WAKEUP_LAT 0
+#define IGNORE_WAKEUP_LAT 1
+
+static int omap_early_device_register(struct platform_device *pdev);
+
+static struct omap_device_pm_latency omap_default_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ }
+};
+
+/* Private functions */
+
+/**
+ * _omap_device_activate - increase device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: increase to latency target (0) or full readiness (1)?
+ *
+ * Increase readiness of omap_device @od (thus decreasing device
+ * wakeup latency, but consuming more power). If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully active. Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is greater than the requested maximum wakeup latency, step
+ * backwards in the omap_device_pm_latency table to ensure the
+ * device's maximum wakeup latency is less than or equal to the
+ * requested maximum wakeup latency. Returns 0.
+ */
+static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+{
+ struct timespec a, b, c;
+
+ dev_dbg(&od->pdev->dev, "omap_device: activating\n");
+
+ while (od->pm_lat_level > 0) {
+ struct omap_device_pm_latency *odpl;
+ unsigned long long act_lat = 0;
+
+ od->pm_lat_level--;
+
+ odpl = od->pm_lats + od->pm_lat_level;
+
+ if (!ignore_lat &&
+ (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
+ break;
+
+ read_persistent_clock(&a);
+
+ /* XXX check return code */
+ odpl->activate_func(od);
+
+ read_persistent_clock(&b);
+
+ c = timespec_sub(b, a);
+ act_lat = timespec_to_ns(&c);
+
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
+
+ if (act_lat > odpl->activate_lat) {
+ odpl->activate_lat_worst = act_lat;
+ if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+ odpl->activate_lat = act_lat;
+ dev_dbg(&od->pdev->dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
+ } else
+ dev_warn(&od->pdev->dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
+ }
+
+ od->dev_wakeup_lat -= odpl->activate_lat;
+ }
+
+ return 0;
+}
+
+/**
+ * _omap_device_deactivate - decrease device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
+ *
+ * Decrease readiness of omap_device @od (thus increasing device
+ * wakeup latency, but conserving power). If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully inactive. Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is less than the requested maximum wakeup latency, step
+ * forwards in the omap_device_pm_latency table to ensure the device's
+ * maximum wakeup latency is less than or equal to the requested
+ * maximum wakeup latency. Returns 0.
+ */
+static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+{
+ struct timespec a, b, c;
+
+ dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
+
+ while (od->pm_lat_level < od->pm_lats_cnt) {
+ struct omap_device_pm_latency *odpl;
+ unsigned long long deact_lat = 0;
+
+ odpl = od->pm_lats + od->pm_lat_level;
+
+ if (!ignore_lat &&
+ ((od->dev_wakeup_lat + odpl->activate_lat) >
+ od->_dev_wakeup_lat_limit))
+ break;
+
+ read_persistent_clock(&a);
+
+ /* XXX check return code */
+ odpl->deactivate_func(od);
+
+ read_persistent_clock(&b);
+
+ c = timespec_sub(b, a);
+ deact_lat = timespec_to_ns(&c);
+
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
+
+ if (deact_lat > odpl->deactivate_lat) {
+ odpl->deactivate_lat_worst = deact_lat;
+ if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+ odpl->deactivate_lat = deact_lat;
+ dev_dbg(&od->pdev->dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
+ } else
+ dev_warn(&od->pdev->dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
+ }
+
+ od->dev_wakeup_lat += odpl->activate_lat;
+
+ od->pm_lat_level++;
+ }
+
+ return 0;
+}
+
+static void _add_clkdev(struct omap_device *od, const char *clk_alias,
+ const char *clk_name)
+{
+ struct clk *r;
+ struct clk_lookup *l;
+
+ if (!clk_alias || !clk_name)
+ return;
+
+ dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
+
+ r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
+ if (!IS_ERR(r)) {
+ dev_warn(&od->pdev->dev,
+ "alias %s already exists\n", clk_alias);
+ clk_put(r);
+ return;
+ }
+
+ r = omap_clk_get_by_name(clk_name);
+ if (IS_ERR(r)) {
+ dev_err(&od->pdev->dev,
+ "omap_clk_get_by_name for %s failed\n", clk_name);
+ return;
+ }
+
+ l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
+ if (!l) {
+ dev_err(&od->pdev->dev,
+ "clkdev_alloc for %s failed\n", clk_alias);
+ return;
+ }
+
+ clkdev_add(l);
+}
+
+/**
+ * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks
+ * and main clock
+ * @od: struct omap_device *od
+ * @oh: struct omap_hwmod *oh
+ *
+ * For the main clock and every optional clock present per hwmod per
+ * omap_device, this function adds an entry in the clkdev table of the
+ * form <dev-id=dev_name, con-id=role> if it does not exist already.
+ *
+ * The function is called from inside omap_device_build_ss(), after
+ * omap_device_register.
+ *
+ * This allows drivers to get a pointer to its optional clocks based on its role
+ * by calling clk_get(<dev*>, <role>).
+ * In the case of the main clock, a "fck" alias is used.
+ *
+ * No return value.
+ */
+static void _add_hwmod_clocks_clkdev(struct omap_device *od,
+ struct omap_hwmod *oh)
+{
+ int i;
+
+ _add_clkdev(od, "fck", oh->main_clk);
+
+ for (i = 0; i < oh->opt_clks_cnt; i++)
+ _add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk);
+}
+
+
+/**
+ * omap_device_build_from_dt - build an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Function for building an omap_device already registered from device-tree
+ *
+ * Returns 0 or PTR_ERR() on error.
+ */
+static int omap_device_build_from_dt(struct platform_device *pdev)
+{
+ struct omap_hwmod **hwmods;
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+ struct device_node *node = pdev->dev.of_node;
+ const char *oh_name;
+ int oh_cnt, i, ret = 0;
+
+ oh_cnt = of_property_count_strings(node, "ti,hwmods");
+ if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ return -ENODEV;
+ }
+
+ hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods) {
+ ret = -ENOMEM;
+ goto odbfd_exit;
+ }
+
+ for (i = 0; i < oh_cnt; i++) {
+ of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
+ oh_name);
+ ret = -EINVAL;
+ goto odbfd_exit1;
+ }
+ hwmods[i] = oh;
+ }
+
+ od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
+ if (!od) {
+ dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
+ oh_name);
+ ret = PTR_ERR(od);
+ goto odbfd_exit1;
+ }
+
+ if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
+ omap_device_disable_idle_on_suspend(pdev);
+
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+
+odbfd_exit1:
+ kfree(hwmods);
+odbfd_exit:
+ return ret;
+}
+
+static int _omap_device_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (pdev->dev.of_node)
+ omap_device_build_from_dt(pdev);
+ break;
+
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (pdev->archdata.od)
+ omap_device_delete(pdev->archdata.od);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+
+/* Public functions for use by core code */
+
+/**
+ * omap_device_get_context_loss_count - get lost context count
+ * @od: struct omap_device *
+ *
+ * Using the primary hwmod, query the context loss count for this
+ * device.
+ *
+ * Callers should consider context for this device lost any time this
+ * function returns a value different than the value the caller got
+ * the last time it called this function.
+ *
+ * If any hwmods exist for the omap_device assoiated with @pdev,
+ * return the context loss counter for that hwmod, otherwise return
+ * zero.
+ */
+int omap_device_get_context_loss_count(struct platform_device *pdev)
+{
+ struct omap_device *od;
+ u32 ret = 0;
+
+ od = to_omap_device(pdev);
+
+ if (od->hwmods_cnt)
+ ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
+
+ return ret;
+}
+
+/**
+ * omap_device_count_resources - count number of struct resource entries needed
+ * @od: struct omap_device *
+ *
+ * Count the number of struct resource entries needed for this
+ * omap_device @od. Used by omap_device_build_ss() to determine how
+ * much memory to allocate before calling
+ * omap_device_fill_resources(). Returns the count.
+ */
+static int omap_device_count_resources(struct omap_device *od)
+{
+ int c = 0;
+ int i;
+
+ for (i = 0; i < od->hwmods_cnt; i++)
+ c += omap_hwmod_count_resources(od->hwmods[i]);
+
+ pr_debug("omap_device: %s: counted %d total resources across %d "
+ "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
+
+ return c;
+}
+
+/**
+ * omap_device_fill_resources - fill in array of struct resource
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the resource data for this omap_device @od. Used by
+ * omap_device_build_ss() after calling omap_device_count_resources().
+ * Ideally this function would not be needed at all. If omap_device
+ * replaces platform_device, then we can specify our own
+ * get_resource()/ get_irq()/etc functions that use the underlying
+ * omap_hwmod information. Or if platform_device is extended to use
+ * subarchitecture-specific function pointers, the various
+ * platform_device functions can simply call omap_device internal
+ * functions to get device resources. Hacking around the existing
+ * platform_device code wastes memory. Returns 0.
+ */
+static int omap_device_fill_resources(struct omap_device *od,
+ struct resource *res)
+{
+ int c = 0;
+ int i, r;
+
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ r = omap_hwmod_fill_resources(od->hwmods[i], res);
+ res += r;
+ c += r;
+ }
+
+ return 0;
+}
+
+/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt)
+{
+ int ret = -ENOMEM;
+ struct omap_device *od;
+ struct resource *res = NULL;
+ int i, res_count;
+ struct omap_hwmod **hwmods;
+
+ od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ if (!od) {
+ ret = -ENOMEM;
+ goto oda_exit1;
+ }
+ od->hwmods_cnt = oh_cnt;
+
+ hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods)
+ goto oda_exit2;
+
+ od->hwmods = hwmods;
+ od->pdev = pdev;
+
+ /*
+ * HACK: Ideally the resources from DT should match, and hwmod
+ * should just add the missing ones. Since the name is not
+ * properly populated by DT, stick to hwmod resources only.
+ */
+ if (pdev->num_resources && pdev->resource)
+ dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, pdev->num_resources);
+
+ res_count = omap_device_count_resources(od);
+ if (res_count > 0) {
+ dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
+ __func__, res_count);
+ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!res)
+ goto oda_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto oda_exit3;
+ }
+
+ if (!pm_lats) {
+ pm_lats = omap_default_latency;
+ pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+ }
+
+ od->pm_lats_cnt = pm_lats_cnt;
+ od->pm_lats = kmemdup(pm_lats,
+ sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+ GFP_KERNEL);
+ if (!od->pm_lats)
+ goto oda_exit3;
+
+ pdev->archdata.od = od;
+
+ for (i = 0; i < oh_cnt; i++) {
+ hwmods[i]->od = od;
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
+ }
+
+ return od;
+
+oda_exit3:
+ kfree(hwmods);
+oda_exit2:
+ kfree(od);
+oda_exit1:
+ dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+ return ERR_PTR(ret);
+}
+
+void omap_device_delete(struct omap_device *od)
+{
+ if (!od)
+ return;
+
+ od->pdev->archdata.od = NULL;
+ kfree(od->pm_lats);
+ kfree(od->hwmods);
+ kfree(od);
+}
+
+/**
+ * omap_device_build - build and register an omap_device with one omap_hwmod
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Convenience function for building and registering a single
+ * omap_device record, which in turn builds and registers a
+ * platform_device record. See omap_device_build_ss() for more
+ * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
+ * passes along the return value of omap_device_build_ss().
+ */
+struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
+ struct omap_hwmod *oh, void *pdata,
+ int pdata_len,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt, int is_early_device)
+{
+ struct omap_hwmod *ohs[] = { oh };
+
+ if (!oh)
+ return ERR_PTR(-EINVAL);
+
+ return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
+ pdata_len, pm_lats, pm_lats_cnt,
+ is_early_device);
+}
+
+/**
+ * omap_device_build_ss - build and register an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Convenience function for building and registering an omap_device
+ * subsystem record. Subsystem records consist of multiple
+ * omap_hwmods. This function in turn builds and registers a
+ * platform_device record. Returns an ERR_PTR() on error, or passes
+ * along the return value of omap_device_register().
+ */
+struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
+ struct omap_hwmod **ohs, int oh_cnt,
+ void *pdata, int pdata_len,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt, int is_early_device)
+{
+ int ret = -ENOMEM;
+ struct platform_device *pdev;
+ struct omap_device *od;
+
+ if (!ohs || oh_cnt == 0 || !pdev_name)
+ return ERR_PTR(-EINVAL);
+
+ if (!pdata && pdata_len > 0)
+ return ERR_PTR(-EINVAL);
+
+ pdev = platform_device_alloc(pdev_name, pdev_id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto odbs_exit;
+ }
+
+ /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+ if (pdev->id != -1)
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+ else
+ dev_set_name(&pdev->dev, "%s", pdev->name);
+
+ od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
+ if (!od)
+ goto odbs_exit1;
+
+ ret = platform_device_add_data(pdev, pdata, pdata_len);
+ if (ret)
+ goto odbs_exit2;
+
+ if (is_early_device)
+ ret = omap_early_device_register(pdev);
+ else
+ ret = omap_device_register(pdev);
+ if (ret)
+ goto odbs_exit2;
+
+ return pdev;
+
+odbs_exit2:
+ omap_device_delete(od);
+odbs_exit1:
+ platform_device_put(pdev);
+odbs_exit:
+
+ pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
+
+ return ERR_PTR(ret);
+}
+
+/**
+ * omap_early_device_register - register an omap_device as an early platform
+ * device.
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure. This currently just calls
+ * platform_early_add_device() on the underlying platform_device.
+ * Returns 0 by default.
+ */
+static int __init omap_early_device_register(struct platform_device *pdev)
+{
+ struct platform_device *devices[1];
+
+ devices[0] = pdev;
+ early_platform_add_devices(devices, 1);
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int _od_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int ret;
+
+ ret = pm_generic_runtime_suspend(dev);
+
+ if (!ret)
+ omap_device_idle(pdev);
+
+ return ret;
+}
+
+static int _od_runtime_idle(struct device *dev)
+{
+ return pm_generic_runtime_idle(dev);
+}
+
+static int _od_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ omap_device_enable(pdev);
+
+ return pm_generic_runtime_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_SUSPEND
+static int _od_suspend_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od = to_omap_device(pdev);
+ int ret;
+
+ ret = pm_generic_suspend_noirq(dev);
+
+ if (!ret && !pm_runtime_status_suspended(dev)) {
+ if (pm_generic_runtime_suspend(dev) == 0) {
+ if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+ omap_device_idle(pdev);
+ od->flags |= OMAP_DEVICE_SUSPENDED;
+ }
+ }
+
+ return ret;
+}
+
+static int _od_resume_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od = to_omap_device(pdev);
+
+ if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
+ !pm_runtime_status_suspended(dev)) {
+ od->flags &= ~OMAP_DEVICE_SUSPENDED;
+ if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+ omap_device_enable(pdev);
+ pm_generic_runtime_resume(dev);
+ }
+
+ return pm_generic_resume_noirq(dev);
+}
+#else
+#define _od_suspend_noirq NULL
+#define _od_resume_noirq NULL
+#endif
+
+struct dev_pm_domain omap_device_pm_domain = {
+ .ops = {
+ SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
+ _od_runtime_idle)
+ USE_PLATFORM_PM_SLEEP_OPS
+ .suspend_noirq = _od_suspend_noirq,
+ .resume_noirq = _od_resume_noirq,
+ }
+};
+
+/**
+ * omap_device_register - register an omap_device with one omap_hwmod
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure. This currently just calls
+ * platform_device_register() on the underlying platform_device.
+ * Returns the return value of platform_device_register().
+ */
+int omap_device_register(struct platform_device *pdev)
+{
+ pr_debug("omap_device: %s: registering\n", pdev->name);
+
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+ return platform_device_add(pdev);
+}
+
+
+/* Public functions for use by device drivers through struct platform_data */
+
+/**
+ * omap_device_enable - fully activate an omap_device
+ * @od: struct omap_device * to activate
+ *
+ * Do whatever is necessary for the hwmods underlying omap_device @od
+ * to be accessible and ready to operate. This generally involves
+ * enabling clocks, setting SYSCONFIG registers; and in the future may
+ * involve remuxing pins. Device drivers should call this function
+ * (through platform_data function pointers) where they would normally
+ * enable clocks, etc. Returns -EINVAL if called when the omap_device
+ * is already enabled, or passes along the return value of
+ * _omap_device_activate().
+ */
+int omap_device_enable(struct platform_device *pdev)
+{
+ int ret;
+ struct omap_device *od;
+
+ od = to_omap_device(pdev);
+
+ if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
+ return -EINVAL;
+ }
+
+ /* Enable everything if we're enabling this device from scratch */
+ if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
+ od->pm_lat_level = od->pm_lats_cnt;
+
+ ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
+
+ od->dev_wakeup_lat = 0;
+ od->_dev_wakeup_lat_limit = UINT_MAX;
+ od->_state = OMAP_DEVICE_STATE_ENABLED;
+
+ return ret;
+}
+
+/**
+ * omap_device_idle - idle an omap_device
+ * @od: struct omap_device * to idle
+ *
+ * Idle omap_device @od by calling as many .deactivate_func() entries
+ * in the omap_device's pm_lats table as is possible without exceeding
+ * the device's maximum wakeup latency limit, pm_lat_limit. Device
+ * drivers should call this function (through platform_data function
+ * pointers) where they would normally disable clocks after operations
+ * complete, etc.. Returns -EINVAL if the omap_device is not
+ * currently enabled, or passes along the return value of
+ * _omap_device_deactivate().
+ */
+int omap_device_idle(struct platform_device *pdev)
+{
+ int ret;
+ struct omap_device *od;
+
+ od = to_omap_device(pdev);
+
+ if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
+ return -EINVAL;
+ }
+
+ ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+
+ od->_state = OMAP_DEVICE_STATE_IDLE;
+
+ return ret;
+}
+
+/**
+ * omap_device_shutdown - shut down an omap_device
+ * @od: struct omap_device * to shut down
+ *
+ * Shut down omap_device @od by calling all .deactivate_func() entries
+ * in the omap_device's pm_lats table and then shutting down all of
+ * the underlying omap_hwmods. Used when a device is being "removed"
+ * or a device driver is being unloaded. Returns -EINVAL if the
+ * omap_device is not currently enabled or idle, or passes along the
+ * return value of _omap_device_deactivate().
+ */
+int omap_device_shutdown(struct platform_device *pdev)
+{
+ int ret, i;
+ struct omap_device *od;
+
+ od = to_omap_device(pdev);
+
+ if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
+ od->_state != OMAP_DEVICE_STATE_IDLE) {
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
+ return -EINVAL;
+ }
+
+ ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
+
+ for (i = 0; i < od->hwmods_cnt; i++)
+ omap_hwmod_shutdown(od->hwmods[i]);
+
+ od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
+
+ return ret;
+}
+
+/**
+ * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
+ * @od: struct omap_device *
+ *
+ * When a device's maximum wakeup latency limit changes, call some of
+ * the .activate_func or .deactivate_func function pointers in the
+ * omap_device's pm_lats array to ensure that the device's maximum
+ * wakeup latency is less than or equal to the new latency limit.
+ * Intended to be called by OMAP PM code whenever a device's maximum
+ * wakeup latency limit changes (e.g., via
+ * omap_pm_set_dev_wakeup_lat()). Returns 0 if nothing needs to be
+ * done (e.g., if the omap_device is not currently idle, or if the
+ * wakeup latency is already current with the new limit) or passes
+ * along the return value of _omap_device_deactivate() or
+ * _omap_device_activate().
+ */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+ u32 new_wakeup_lat_limit)
+{
+ int ret = -EINVAL;
+ struct omap_device *od;
+
+ od = to_omap_device(pdev);
+
+ if (new_wakeup_lat_limit == od->dev_wakeup_lat)
+ return 0;
+
+ od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
+
+ if (od->_state != OMAP_DEVICE_STATE_IDLE)
+ return 0;
+ else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
+ ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+ else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
+ ret = _omap_device_activate(od, USE_WAKEUP_LAT);
+
+ return ret;
+}
+
+/**
+ * omap_device_get_pwrdm - return the powerdomain * associated with @od
+ * @od: struct omap_device *
+ *
+ * Return the powerdomain associated with the first underlying
+ * omap_hwmod for this omap_device. Intended for use by core OMAP PM
+ * code. Returns NULL on error or a struct powerdomain * upon
+ * success.
+ */
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
+{
+ /*
+ * XXX Assumes that all omap_hwmod powerdomains are identical.
+ * This may not necessarily be true. There should be a sanity
+ * check in here to WARN() if any difference appears.
+ */
+ if (!od->hwmods_cnt)
+ return NULL;
+
+ return omap_hwmod_get_pwrdm(od->hwmods[0]);
+}
+
+/**
+ * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
+ * @od: struct omap_device *
+ *
+ * Return the MPU's virtual address for the base of the hwmod, from
+ * the ioremap() that the hwmod code does. Only valid if there is one
+ * hwmod associated with this device. Returns NULL if there are zero
+ * or more than one hwmods associated with this omap_device;
+ * otherwise, passes along the return value from
+ * omap_hwmod_get_mpu_rt_va().
+ */
+void __iomem *omap_device_get_rt_va(struct omap_device *od)
+{
+ if (od->hwmods_cnt != 1)
+ return NULL;
+
+ return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
+}
+
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+ struct omap_hwmod *oh;
+
+ if (!oh_name) {
+ WARN(1, "%s: no hwmod name!\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (IS_ERR_OR_NULL(oh)) {
+ WARN(1, "%s: no hwmod for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ }
+ if (IS_ERR_OR_NULL(oh->od)) {
+ WARN(1, "%s: no omap_device for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ }
+
+ if (IS_ERR_OR_NULL(oh->od->pdev))
+ return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+ return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
+/*
+ * Public functions intended for use in omap_device_pm_latency
+ * .activate_func and .deactivate_func function pointers
+ */
+
+/**
+ * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Enable all underlying hwmods. Returns 0.
+ */
+int omap_device_enable_hwmods(struct omap_device *od)
+{
+ int i;
+
+ for (i = 0; i < od->hwmods_cnt; i++)
+ omap_hwmod_enable(od->hwmods[i]);
+
+ /* XXX pass along return value here? */
+ return 0;
+}
+
+/**
+ * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Idle all underlying hwmods. Returns 0.
+ */
+int omap_device_idle_hwmods(struct omap_device *od)
+{
+ int i;
+
+ for (i = 0; i < od->hwmods_cnt; i++)
+ omap_hwmod_idle(od->hwmods[i]);
+
+ /* XXX pass along return value here? */
+ return 0;
+}
+
+/**
+ * omap_device_disable_clocks - disable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Disable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device. Returns 0.
+ */
+int omap_device_disable_clocks(struct omap_device *od)
+{
+ int i;
+
+ for (i = 0; i < od->hwmods_cnt; i++)
+ omap_hwmod_disable_clocks(od->hwmods[i]);
+
+ /* XXX pass along return value here? */
+ return 0;
+}
+
+/**
+ * omap_device_enable_clocks - enable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Enable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device. Returns 0.
+ */
+int omap_device_enable_clocks(struct omap_device *od)
+{
+ int i;
+
+ for (i = 0; i < od->hwmods_cnt; i++)
+ omap_hwmod_enable_clocks(od->hwmods[i]);
+
+ /* XXX pass along return value here? */
+ return 0;
+}
+
+static struct notifier_block platform_nb = {
+ .notifier_call = _omap_device_notifier_call,
+};
+
+static int __init omap_device_init(void)
+{
+ bus_register_notifier(&platform_bus_type, &platform_nb);
+ return 0;
+}
+core_initcall(omap_device_init);
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/sram.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/sram.c
new file mode 100644
index 0000000..f9a8c53
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/sram.c
@@ -0,0 +1,395 @@
+/*
+ * linux/arch/arm/plat-omap/sram.c
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/sram.h>
+#include <plat/board.h>
+#include <plat/cpu.h>
+
+#include "sram.h"
+
+/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
+#include "../mach-omap2/iomap.h"
+#include "../mach-omap2/prm2xxx_3xxx.h"
+#include "../mach-omap2/sdrc.h"
+
+#define OMAP1_SRAM_PA 0x20000000
+#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
+#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
+#else
+#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2PLUS)
+#define SRAM_BOOTLOADER_SZ 0x00
+#else
+#define SRAM_BOOTLOADER_SZ 0x80
+#endif
+
+#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
+
+#define GP_DEVICE 0x300
+
+#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
+
+static unsigned long omap_sram_start;
+static void __iomem *omap_sram_base;
+static unsigned long omap_sram_size;
+static void __iomem *omap_sram_ceil;
+
+/*
+ * Depending on the target RAMFS firewall setup, the public usable amount of
+ * SRAM varies. The default accessible size for all device types is 2k. A GP
+ * device allows ARM11 but not other initiators for full size. This
+ * functionality seems ok until some nice security API happens.
+ */
+static int is_sram_locked(void)
+{
+ if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
+ /* RAMFW: R/W access to all initiators for all qualifier sets */
+ if (cpu_is_omap242x()) {
+ __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+ }
+ if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
+ __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+ __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+ }
+ return 0;
+ } else
+ return 1; /* assume locked with no PPA or security driver */
+}
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_sram(void)
+{
+ if (cpu_class_is_omap2()) {
+ if (is_sram_locked()) {
+ if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PUB_PA;
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PUB_PA;
+ omap_sram_size = 0xa000; /* 40K */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PUB_PA;
+ omap_sram_size = 0x800; /* 2K */
+ }
+ } else {
+ if (cpu_is_am33xx()) {
+ omap_sram_start = AM33XX_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0xe000; /* 56K */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PA;
+ if (cpu_is_omap242x())
+ omap_sram_size = 0xa0000; /* 640K */
+ else if (cpu_is_omap243x())
+ omap_sram_size = 0x10000; /* 64K */
+ }
+ }
+ } else {
+ omap_sram_start = OMAP1_SRAM_PA;
+
+ if (cpu_is_omap7xx())
+ omap_sram_size = 0x32000; /* 200K */
+ else if (cpu_is_omap15xx())
+ omap_sram_size = 0x30000; /* 192K */
+ else if (cpu_is_omap1610() || cpu_is_omap1611() ||
+ cpu_is_omap1621() || cpu_is_omap1710())
+ omap_sram_size = 0x4000; /* 16K */
+ else {
+ pr_err("Could not detect SRAM size\n");
+ omap_sram_size = 0x4000;
+ }
+ }
+}
+
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+static void __init omap_map_sram(void)
+{
+ int cached = 1;
+
+ if (omap_sram_size == 0)
+ return;
+
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ omap_sram_start += PAGE_SIZE;
+ omap_sram_size -= SZ_16K;
+#endif
+ if (cpu_is_omap34xx()) {
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ cached = 0;
+ }
+
+ omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+ omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
+ cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
+
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
+
+ /*
+ * Looks like we need to preserve some bootloader code at the
+ * beginning of SRAM for jumping to flash for reboot to work...
+ */
+ memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
+ omap_sram_size - SRAM_BOOTLOADER_SZ);
+}
+
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+void *omap_sram_push_address(unsigned long size)
+{
+ unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+ available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+
+ if (size > available) {
+ pr_err("Not enough space in SRAM\n");
+ return NULL;
+ }
+
+ new_ceil -= size;
+ new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+ omap_sram_ceil = IOMEM(new_ceil);
+
+ return (void *)omap_sram_ceil;
+}
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+ BUG_ON(!_omap_sram_reprogram_clock);
+ /* On 730, bit 13 must always be 1 */
+ if (cpu_is_omap7xx())
+ ckctl |= 0x2000;
+ _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+static int __init omap1_sram_init(void)
+{
+ _omap_sram_reprogram_clock =
+ omap_sram_push(omap1_sram_reprogram_clock,
+ omap1_sram_reprogram_clock_sz);
+
+ return 0;
+}
+
+#else
+#define omap1_sram_init() do {} while (0)
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2)
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+ BUG_ON(!_omap2_sram_ddr_init);
+ _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+ base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
+ _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+ BUG_ON(!_omap2_set_prcm);
+ return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2420
+static int __init omap242x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+ omap242x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+ omap242x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+ omap242x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+static int __init omap243x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+ omap243x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+ omap243x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+ omap243x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap3_sram_configure_core_dpll)(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
+{
+ BUG_ON(!_omap3_sram_configure_core_dpll);
+ return _omap3_sram_configure_core_dpll(
+ m2, unlock_dll, f, inc,
+ sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+ sdrc_actim_ctrl_b_0, sdrc_mr_0,
+ sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+ sdrc_actim_ctrl_b_1, sdrc_mr_1);
+}
+
+void omap3_sram_restore_context(void)
+{
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
+
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
+ omap_push_sram_idle();
+}
+
+static inline int omap34xx_sram_init(void)
+{
+ omap3_sram_restore_context();
+ return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+static inline int am33xx_sram_init(void)
+{
+ return 0;
+}
+
+int __init omap_sram_init(void)
+{
+ omap_detect_sram();
+ omap_map_sram();
+
+ if (!(cpu_class_is_omap2()))
+ omap1_sram_init();
+ else if (cpu_is_omap242x())
+ omap242x_sram_init();
+ else if (cpu_is_omap2430())
+ omap243x_sram_init();
+ else if (cpu_is_am33xx())
+ am33xx_sram_init();
+ else if (cpu_is_omap34xx())
+ omap34xx_sram_init();
+
+ return 0;
+}
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/sram.h b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/sram.h
new file mode 100644
index 0000000..29b43ef
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/sram.h
@@ -0,0 +1,6 @@
+#ifndef __PLAT_OMAP_SRAM_H__
+#define __PLAT_OMAP_SRAM_H__
+
+extern int __init omap_sram_init(void);
+
+#endif /* __PLAT_OMAP_SRAM_H__ */
diff --git a/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/usb.c b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/usb.c
new file mode 100644
index 0000000..d2bbfd1
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/arch/arm/plat-omap/usb.c
@@ -0,0 +1,147 @@
+ /*
+ * arch/arm/plat-omap/usb.c -- platform level USB initialization
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <plat/usb.h>
+#include <plat/board.h>
+
+#include <mach/hardware.h>
+
+#include "../mach-omap2/common.h"
+
+#ifdef CONFIG_ARCH_OMAP_OTG
+
+void __init
+omap_otg_init(struct omap_usb_config *config)
+{
+ u32 syscon;
+ int status;
+ int alt_pingroup = 0;
+
+ /* NOTE: no bus or clock setup (yet?) */
+
+ syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
+ if (!(syscon & OTG_RESET_DONE))
+ pr_debug("USB resets not complete?\n");
+
+ //omap_writew(0, OTG_IRQ_EN);
+
+ /* pin muxing and transceiver pinouts */
+ if (config->pins[0] > 2) /* alt pingroup 2 */
+ alt_pingroup = 1;
+ syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
+ syscon |= config->usb1_init(config->pins[1]);
+ syscon |= config->usb2_init(config->pins[2], alt_pingroup);
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
+
+ syscon = config->hmc_mode;
+ syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
+#ifdef CONFIG_USB_OTG
+ if (config->otg)
+ syscon |= OTG_EN;
+#endif
+ if (cpu_class_is_omap1())
+ pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+ omap_readl(USB_TRANSCEIVER_CTRL));
+ pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+ omap_writel(syscon, OTG_SYSCON_2);
+
+ printk("USB: hmc %d", config->hmc_mode);
+ if (!alt_pingroup)
+ printk(", usb2 alt %d wires", config->pins[2]);
+ else if (config->pins[0])
+ printk(", usb0 %d wires%s", config->pins[0],
+ is_usb0_device(config) ? " (dev)" : "");
+ if (config->pins[1])
+ printk(", usb1 %d wires", config->pins[1]);
+ if (!alt_pingroup && config->pins[2])
+ printk(", usb2 %d wires", config->pins[2]);
+ if (config->otg)
+ printk(", Mini-AB on usb%d", config->otg - 1);
+ printk("\n");
+
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ /* leave USB clocks/controllers off until needed */
+ w = omap_readw(ULPD_SOFT_REQ);
+ w &= ~SOFT_USB_CLK_REQ;
+ omap_writew(w, ULPD_SOFT_REQ);
+
+ w = omap_readw(ULPD_CLOCK_CTRL);
+ w &= ~USB_MCLK_EN;
+ w |= DIS_USB_PVCI_CLK;
+ omap_writew(w, ULPD_CLOCK_CTRL);
+ }
+ syscon = omap_readl(OTG_SYSCON_1);
+ syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ if (config->otg || config->register_dev) {
+ struct platform_device *udc_device = config->udc_device;
+
+ syscon &= ~DEV_IDLE_EN;
+ udc_device->dev.platform_data = config;
+ status = platform_device_register(udc_device);
+ if (status)
+ pr_debug("can't register UDC device, %d\n", status);
+ }
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ if (config->otg || config->register_host) {
+ struct platform_device *ohci_device = config->ohci_device;
+
+ syscon &= ~HST_IDLE_EN;
+ ohci_device->dev.platform_data = config;
+ status = platform_device_register(ohci_device);
+ if (status)
+ pr_debug("can't register OHCI device, %d\n", status);
+ }
+#endif
+
+#ifdef CONFIG_USB_OTG
+ if (config->otg) {
+ struct platform_device *otg_device = config->otg_device;
+
+ syscon &= ~OTG_IDLE_EN;
+ otg_device->dev.platform_data = config;
+ status = platform_device_register(otg_device);
+ if (status)
+ pr_debug("can't register OTG device, %d\n", status);
+ }
+#endif
+ pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+ omap_writel(syscon, OTG_SYSCON_1);
+
+ status = 0;
+}
+
+#else
+void omap_otg_init(struct omap_usb_config *config) {}
+#endif