zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/acpi/acpica/exmutex.c b/ap/os/linux/linux-3.4.x/drivers/acpi/acpica/exmutex.c
new file mode 100644
index 0000000..60933e9
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/acpi/acpica/exmutex.c
@@ -0,0 +1,498 @@
+
+/******************************************************************************
+ *
+ * Module Name: exmutex - ASL Mutex Acquire/Release functions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acinterp.h"
+#include "acevents.h"
+
+#define _COMPONENT ACPI_EXECUTER
+ACPI_MODULE_NAME("exmutex")
+
+/* Local prototypes */
+static void
+acpi_ex_link_mutex(union acpi_operand_object *obj_desc,
+ struct acpi_thread_state *thread);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_unlink_mutex
+ *
+ * PARAMETERS: obj_desc - The mutex to be unlinked
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Remove a mutex from the "AcquiredMutex" list
+ *
+ ******************************************************************************/
+
+void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc)
+{
+ struct acpi_thread_state *thread = obj_desc->mutex.owner_thread;
+
+ if (!thread) {
+ return;
+ }
+
+ /* Doubly linked list */
+
+ if (obj_desc->mutex.next) {
+ (obj_desc->mutex.next)->mutex.prev = obj_desc->mutex.prev;
+ }
+
+ if (obj_desc->mutex.prev) {
+ (obj_desc->mutex.prev)->mutex.next = obj_desc->mutex.next;
+
+ /*
+ * Migrate the previous sync level associated with this mutex to
+ * the previous mutex on the list so that it may be preserved.
+ * This handles the case where several mutexes have been acquired
+ * at the same level, but are not released in opposite order.
+ */
+ (obj_desc->mutex.prev)->mutex.original_sync_level =
+ obj_desc->mutex.original_sync_level;
+ } else {
+ thread->acquired_mutex_list = obj_desc->mutex.next;
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_link_mutex
+ *
+ * PARAMETERS: obj_desc - The mutex to be linked
+ * Thread - Current executing thread object
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Add a mutex to the "AcquiredMutex" list for this walk
+ *
+ ******************************************************************************/
+
+static void
+acpi_ex_link_mutex(union acpi_operand_object *obj_desc,
+ struct acpi_thread_state *thread)
+{
+ union acpi_operand_object *list_head;
+
+ list_head = thread->acquired_mutex_list;
+
+ /* This object will be the first object in the list */
+
+ obj_desc->mutex.prev = NULL;
+ obj_desc->mutex.next = list_head;
+
+ /* Update old first object to point back to this object */
+
+ if (list_head) {
+ list_head->mutex.prev = obj_desc;
+ }
+
+ /* Update list head */
+
+ thread->acquired_mutex_list = obj_desc;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_acquire_mutex_object
+ *
+ * PARAMETERS: Timeout - Timeout in milliseconds
+ * obj_desc - Mutex object
+ * thread_id - Current thread state
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Acquire an AML mutex, low-level interface. Provides a common
+ * path that supports multiple acquires by the same thread.
+ *
+ * MUTEX: Interpreter must be locked
+ *
+ * NOTE: This interface is called from three places:
+ * 1) From acpi_ex_acquire_mutex, via an AML Acquire() operator
+ * 2) From acpi_ex_acquire_global_lock when an AML Field access requires the
+ * global lock
+ * 3) From the external interface, acpi_acquire_global_lock
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_acquire_mutex_object(u16 timeout,
+ union acpi_operand_object *obj_desc,
+ acpi_thread_id thread_id)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE_PTR(ex_acquire_mutex_object, obj_desc);
+
+ if (!obj_desc) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Support for multiple acquires by the owning thread */
+
+ if (obj_desc->mutex.thread_id == thread_id) {
+ /*
+ * The mutex is already owned by this thread, just increment the
+ * acquisition depth
+ */
+ obj_desc->mutex.acquisition_depth++;
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /* Acquire the mutex, wait if necessary. Special case for Global Lock */
+
+ if (obj_desc == acpi_gbl_global_lock_mutex) {
+ status = acpi_ev_acquire_global_lock(timeout);
+ } else {
+ status = acpi_ex_system_wait_mutex(obj_desc->mutex.os_mutex,
+ timeout);
+ }
+
+ if (ACPI_FAILURE(status)) {
+
+ /* Includes failure from a timeout on time_desc */
+
+ return_ACPI_STATUS(status);
+ }
+
+ /* Acquired the mutex: update mutex object */
+
+ obj_desc->mutex.thread_id = thread_id;
+ obj_desc->mutex.acquisition_depth = 1;
+ obj_desc->mutex.original_sync_level = 0;
+ obj_desc->mutex.owner_thread = NULL; /* Used only for AML Acquire() */
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_acquire_mutex
+ *
+ * PARAMETERS: time_desc - Timeout integer
+ * obj_desc - Mutex object
+ * walk_state - Current method execution state
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Acquire an AML mutex
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_acquire_mutex(union acpi_operand_object *time_desc,
+ union acpi_operand_object *obj_desc,
+ struct acpi_walk_state *walk_state)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE_PTR(ex_acquire_mutex, obj_desc);
+
+ if (!obj_desc) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Must have a valid thread state struct */
+
+ if (!walk_state->thread) {
+ ACPI_ERROR((AE_INFO,
+ "Cannot acquire Mutex [%4.4s], null thread info",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
+ return_ACPI_STATUS(AE_AML_INTERNAL);
+ }
+
+ /*
+ * Current sync level must be less than or equal to the sync level of the
+ * mutex. This mechanism provides some deadlock prevention
+ */
+ if (walk_state->thread->current_sync_level > obj_desc->mutex.sync_level) {
+ ACPI_ERROR((AE_INFO,
+ "Cannot acquire Mutex [%4.4s], current SyncLevel is too large (%u)",
+ acpi_ut_get_node_name(obj_desc->mutex.node),
+ walk_state->thread->current_sync_level));
+ return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
+ }
+
+ status = acpi_ex_acquire_mutex_object((u16) time_desc->integer.value,
+ obj_desc,
+ walk_state->thread->thread_id);
+ if (ACPI_SUCCESS(status) && obj_desc->mutex.acquisition_depth == 1) {
+
+ /* Save Thread object, original/current sync levels */
+
+ obj_desc->mutex.owner_thread = walk_state->thread;
+ obj_desc->mutex.original_sync_level =
+ walk_state->thread->current_sync_level;
+ walk_state->thread->current_sync_level =
+ obj_desc->mutex.sync_level;
+
+ /* Link the mutex to the current thread for force-unlock at method exit */
+
+ acpi_ex_link_mutex(obj_desc, walk_state->thread);
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_release_mutex_object
+ *
+ * PARAMETERS: obj_desc - The object descriptor for this op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Release a previously acquired Mutex, low level interface.
+ * Provides a common path that supports multiple releases (after
+ * previous multiple acquires) by the same thread.
+ *
+ * MUTEX: Interpreter must be locked
+ *
+ * NOTE: This interface is called from three places:
+ * 1) From acpi_ex_release_mutex, via an AML Acquire() operator
+ * 2) From acpi_ex_release_global_lock when an AML Field access requires the
+ * global lock
+ * 3) From the external interface, acpi_release_global_lock
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_release_mutex_object(union acpi_operand_object *obj_desc)
+{
+ acpi_status status = AE_OK;
+
+ ACPI_FUNCTION_TRACE(ex_release_mutex_object);
+
+ if (obj_desc->mutex.acquisition_depth == 0) {
+ return (AE_NOT_ACQUIRED);
+ }
+
+ /* Match multiple Acquires with multiple Releases */
+
+ obj_desc->mutex.acquisition_depth--;
+ if (obj_desc->mutex.acquisition_depth != 0) {
+
+ /* Just decrement the depth and return */
+
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ if (obj_desc->mutex.owner_thread) {
+
+ /* Unlink the mutex from the owner's list */
+
+ acpi_ex_unlink_mutex(obj_desc);
+ obj_desc->mutex.owner_thread = NULL;
+ }
+
+ /* Release the mutex, special case for Global Lock */
+
+ if (obj_desc == acpi_gbl_global_lock_mutex) {
+ status = acpi_ev_release_global_lock();
+ } else {
+ acpi_os_release_mutex(obj_desc->mutex.os_mutex);
+ }
+
+ /* Clear mutex info */
+
+ obj_desc->mutex.thread_id = 0;
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_release_mutex
+ *
+ * PARAMETERS: obj_desc - The object descriptor for this op
+ * walk_state - Current method execution state
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Release a previously acquired Mutex.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
+ struct acpi_walk_state *walk_state)
+{
+ acpi_status status = AE_OK;
+ u8 previous_sync_level;
+ struct acpi_thread_state *owner_thread;
+
+ ACPI_FUNCTION_TRACE(ex_release_mutex);
+
+ if (!obj_desc) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ owner_thread = obj_desc->mutex.owner_thread;
+
+ /* The mutex must have been previously acquired in order to release it */
+
+ if (!owner_thread) {
+ ACPI_ERROR((AE_INFO,
+ "Cannot release Mutex [%4.4s], not acquired",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
+ return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
+ }
+
+ /* Must have a valid thread. */
+ if (!walk_state->thread) {
+ ACPI_ERROR((AE_INFO,
+ "Cannot release Mutex [%4.4s], null thread info",
+ acpi_ut_get_node_name(obj_desc->mutex.node)));
+ return_ACPI_STATUS(AE_AML_INTERNAL);
+ }
+
+ /*
+ * The Mutex is owned, but this thread must be the owner.
+ * Special case for Global Lock, any thread can release
+ */
+ if ((owner_thread->thread_id != walk_state->thread->thread_id) &&
+ (obj_desc != acpi_gbl_global_lock_mutex)) {
+ ACPI_ERROR((AE_INFO,
+ "Thread %u cannot release Mutex [%4.4s] acquired by thread %u",
+ (u32)walk_state->thread->thread_id,
+ acpi_ut_get_node_name(obj_desc->mutex.node),
+ (u32)owner_thread->thread_id));
+ return_ACPI_STATUS(AE_AML_NOT_OWNER);
+ }
+
+ /*
+ * The sync level of the mutex must be equal to the current sync level. In
+ * other words, the current level means that at least one mutex at that
+ * level is currently being held. Attempting to release a mutex of a
+ * different level can only mean that the mutex ordering rule is being
+ * violated. This behavior is clarified in ACPI 4.0 specification.
+ */
+ if (obj_desc->mutex.sync_level != owner_thread->current_sync_level) {
+ ACPI_ERROR((AE_INFO,
+ "Cannot release Mutex [%4.4s], SyncLevel mismatch: mutex %u current %u",
+ acpi_ut_get_node_name(obj_desc->mutex.node),
+ obj_desc->mutex.sync_level,
+ walk_state->thread->current_sync_level));
+ return_ACPI_STATUS(AE_AML_MUTEX_ORDER);
+ }
+
+ /*
+ * Get the previous sync_level from the head of the acquired mutex list.
+ * This handles the case where several mutexes at the same level have been
+ * acquired, but are not released in reverse order.
+ */
+ previous_sync_level =
+ owner_thread->acquired_mutex_list->mutex.original_sync_level;
+
+ status = acpi_ex_release_mutex_object(obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ if (obj_desc->mutex.acquisition_depth == 0) {
+
+ /* Restore the previous sync_level */
+
+ owner_thread->current_sync_level = previous_sync_level;
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_release_all_mutexes
+ *
+ * PARAMETERS: Thread - Current executing thread object
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Release all mutexes held by this thread
+ *
+ * NOTE: This function is called as the thread is exiting the interpreter.
+ * Mutexes are not released when an individual control method is exited, but
+ * only when the parent thread actually exits the interpreter. This allows one
+ * method to acquire a mutex, and a different method to release it, as long as
+ * this is performed underneath a single parent control method.
+ *
+ ******************************************************************************/
+
+void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread)
+{
+ union acpi_operand_object *next = thread->acquired_mutex_list;
+ union acpi_operand_object *obj_desc;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Traverse the list of owned mutexes, releasing each one */
+
+ while (next) {
+ obj_desc = next;
+ next = obj_desc->mutex.next;
+
+ obj_desc->mutex.prev = NULL;
+ obj_desc->mutex.next = NULL;
+ obj_desc->mutex.acquisition_depth = 0;
+
+ /* Release the mutex, special case for Global Lock */
+
+ if (obj_desc == acpi_gbl_global_lock_mutex) {
+
+ /* Ignore errors */
+
+ (void)acpi_ev_release_global_lock();
+ } else {
+ acpi_os_release_mutex(obj_desc->mutex.os_mutex);
+ }
+
+ /* Mark mutex unowned */
+
+ obj_desc->mutex.owner_thread = NULL;
+ obj_desc->mutex.thread_id = 0;
+
+ /* Update Thread sync_level (Last mutex is the important one) */
+
+ thread->current_sync_level =
+ obj_desc->mutex.original_sync_level;
+ }
+}