zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/acpi/acpica/utmisc.c b/ap/os/linux/linux-3.4.x/drivers/acpi/acpica/utmisc.c
new file mode 100644
index 0000000..86f19db
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/acpi/acpica/utmisc.c
@@ -0,0 +1,1041 @@
+/*******************************************************************************
+ *
+ * Module Name: utmisc - common utility procedures
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <linux/module.h>
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utmisc")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_validate_exception
+ *
+ * PARAMETERS: Status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. NULL if exception is
+ * not valid.
+ *
+ * DESCRIPTION: This function validates and translates an ACPI exception into
+ * an ASCII string.
+ *
+ ******************************************************************************/
+const char *acpi_ut_validate_exception(acpi_status status)
+{
+ u32 sub_status;
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Status is composed of two parts, a "type" and an actual code
+ */
+ sub_status = (status & ~AE_CODE_MASK);
+
+ switch (status & AE_CODE_MASK) {
+ case AE_CODE_ENVIRONMENTAL:
+
+ if (sub_status <= AE_CODE_ENV_MAX) {
+ exception = acpi_gbl_exception_names_env[sub_status];
+ }
+ break;
+
+ case AE_CODE_PROGRAMMER:
+
+ if (sub_status <= AE_CODE_PGM_MAX) {
+ exception = acpi_gbl_exception_names_pgm[sub_status];
+ }
+ break;
+
+ case AE_CODE_ACPI_TABLES:
+
+ if (sub_status <= AE_CODE_TBL_MAX) {
+ exception = acpi_gbl_exception_names_tbl[sub_status];
+ }
+ break;
+
+ case AE_CODE_AML:
+
+ if (sub_status <= AE_CODE_AML_MAX) {
+ exception = acpi_gbl_exception_names_aml[sub_status];
+ }
+ break;
+
+ case AE_CODE_CONTROL:
+
+ if (sub_status <= AE_CODE_CTRL_MAX) {
+ exception = acpi_gbl_exception_names_ctrl[sub_status];
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_is_pci_root_bridge
+ *
+ * PARAMETERS: Id - The HID/CID in string format
+ *
+ * RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
+ *
+ * DESCRIPTION: Determine if the input ID is a PCI Root Bridge ID.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_is_pci_root_bridge(char *id)
+{
+
+ /*
+ * Check if this is a PCI root bridge.
+ * ACPI 3.0+: check for a PCI Express root also.
+ */
+ if (!(ACPI_STRCMP(id,
+ PCI_ROOT_HID_STRING)) ||
+ !(ACPI_STRCMP(id, PCI_EXPRESS_ROOT_HID_STRING))) {
+ return (TRUE);
+ }
+
+ return (FALSE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_is_aml_table
+ *
+ * PARAMETERS: Table - An ACPI table
+ *
+ * RETURN: TRUE if table contains executable AML; FALSE otherwise
+ *
+ * DESCRIPTION: Check ACPI Signature for a table that contains AML code.
+ * Currently, these are DSDT,SSDT,PSDT. All other table types are
+ * data tables that do not contain AML code.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
+{
+
+ /* These are the only tables that contain executable AML */
+
+ if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) ||
+ ACPI_COMPARE_NAME(table->signature, ACPI_SIG_PSDT) ||
+ ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
+ return (TRUE);
+ }
+
+ return (FALSE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_allocate_owner_id
+ *
+ * PARAMETERS: owner_id - Where the new owner ID is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
+ * track objects created by the table or method, to be deleted
+ * when the method exits or the table is unloaded.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
+{
+ u32 i;
+ u32 j;
+ u32 k;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
+
+ /* Guard against multiple allocations of ID to the same location */
+
+ if (*owner_id) {
+ ACPI_ERROR((AE_INFO, "Owner ID [0x%2.2X] already exists",
+ *owner_id));
+ return_ACPI_STATUS(AE_ALREADY_EXISTS);
+ }
+
+ /* Mutex for the global ID mask */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Find a free owner ID, cycle through all possible IDs on repeated
+ * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
+ * to be scanned twice.
+ */
+ for (i = 0, j = acpi_gbl_last_owner_id_index;
+ i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
+ if (j >= ACPI_NUM_OWNERID_MASKS) {
+ j = 0; /* Wraparound to start of mask array */
+ }
+
+ for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
+ if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
+
+ /* There are no free IDs in this mask */
+
+ break;
+ }
+
+ if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
+ /*
+ * Found a free ID. The actual ID is the bit index plus one,
+ * making zero an invalid Owner ID. Save this as the last ID
+ * allocated and update the global ID mask.
+ */
+ acpi_gbl_owner_id_mask[j] |= (1 << k);
+
+ acpi_gbl_last_owner_id_index = (u8) j;
+ acpi_gbl_next_owner_id_offset = (u8) (k + 1);
+
+ /*
+ * Construct encoded ID from the index and bit position
+ *
+ * Note: Last [j].k (bit 255) is never used and is marked
+ * permanently allocated (prevents +1 overflow)
+ */
+ *owner_id =
+ (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
+
+ ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
+ "Allocated OwnerId: %2.2X\n",
+ (unsigned int)*owner_id));
+ goto exit;
+ }
+ }
+
+ acpi_gbl_next_owner_id_offset = 0;
+ }
+
+ /*
+ * All owner_ids have been allocated. This typically should
+ * not happen since the IDs are reused after deallocation. The IDs are
+ * allocated upon table load (one per table) and method execution, and
+ * they are released when a table is unloaded or a method completes
+ * execution.
+ *
+ * If this error happens, there may be very deep nesting of invoked control
+ * methods, or there may be a bug where the IDs are not released.
+ */
+ status = AE_OWNER_ID_LIMIT;
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
+
+ exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_release_owner_id
+ *
+ * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_iD
+ *
+ * RETURN: None. No error is returned because we are either exiting a
+ * control method or unloading a table. Either way, we would
+ * ignore any error anyway.
+ *
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
+ *
+ ******************************************************************************/
+
+void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
+{
+ acpi_owner_id owner_id = *owner_id_ptr;
+ acpi_status status;
+ u32 index;
+ u32 bit;
+
+ ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
+
+ /* Always clear the input owner_id (zero is an invalid ID) */
+
+ *owner_id_ptr = 0;
+
+ /* Zero is not a valid owner_iD */
+
+ if (owner_id == 0) {
+ ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
+ return_VOID;
+ }
+
+ /* Mutex for the global ID mask */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return_VOID;
+ }
+
+ /* Normalize the ID to zero */
+
+ owner_id--;
+
+ /* Decode ID to index/offset pair */
+
+ index = ACPI_DIV_32(owner_id);
+ bit = 1 << ACPI_MOD_32(owner_id);
+
+ /* Free the owner ID only if it is valid */
+
+ if (acpi_gbl_owner_id_mask[index] & bit) {
+ acpi_gbl_owner_id_mask[index] ^= bit;
+ } else {
+ ACPI_ERROR((AE_INFO,
+ "Release of non-allocated OwnerId: 0x%2.2X",
+ owner_id + 1));
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strupr (strupr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert string to uppercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strupr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, uppercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)ACPI_TOUPPER(*string);
+ }
+
+ return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_print_string
+ *
+ * PARAMETERS: String - Null terminated ASCII string
+ * max_length - Maximum output length
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
+ * sequences.
+ *
+ ******************************************************************************/
+
+void acpi_ut_print_string(char *string, u8 max_length)
+{
+ u32 i;
+
+ if (!string) {
+ acpi_os_printf("<\"NULL STRING PTR\">");
+ return;
+ }
+
+ acpi_os_printf("\"");
+ for (i = 0; string[i] && (i < max_length); i++) {
+
+ /* Escape sequences */
+
+ switch (string[i]) {
+ case 0x07:
+ acpi_os_printf("\\a"); /* BELL */
+ break;
+
+ case 0x08:
+ acpi_os_printf("\\b"); /* BACKSPACE */
+ break;
+
+ case 0x0C:
+ acpi_os_printf("\\f"); /* FORMFEED */
+ break;
+
+ case 0x0A:
+ acpi_os_printf("\\n"); /* LINEFEED */
+ break;
+
+ case 0x0D:
+ acpi_os_printf("\\r"); /* CARRIAGE RETURN */
+ break;
+
+ case 0x09:
+ acpi_os_printf("\\t"); /* HORIZONTAL TAB */
+ break;
+
+ case 0x0B:
+ acpi_os_printf("\\v"); /* VERTICAL TAB */
+ break;
+
+ case '\'': /* Single Quote */
+ case '\"': /* Double Quote */
+ case '\\': /* Backslash */
+ acpi_os_printf("\\%c", (int)string[i]);
+ break;
+
+ default:
+
+ /* Check for printable character or hex escape */
+
+ if (ACPI_IS_PRINT(string[i])) {
+ /* This is a normal character */
+
+ acpi_os_printf("%c", (int)string[i]);
+ } else {
+ /* All others will be Hex escapes */
+
+ acpi_os_printf("\\x%2.2X", (s32) string[i]);
+ }
+ break;
+ }
+ }
+ acpi_os_printf("\"");
+
+ if (i == max_length && string[i]) {
+ acpi_os_printf("...");
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_dword_byte_swap
+ *
+ * PARAMETERS: Value - Value to be converted
+ *
+ * RETURN: u32 integer with bytes swapped
+ *
+ * DESCRIPTION: Convert a 32-bit value to big-endian (swap the bytes)
+ *
+ ******************************************************************************/
+
+u32 acpi_ut_dword_byte_swap(u32 value)
+{
+ union {
+ u32 value;
+ u8 bytes[4];
+ } out;
+ union {
+ u32 value;
+ u8 bytes[4];
+ } in;
+
+ ACPI_FUNCTION_ENTRY();
+
+ in.value = value;
+
+ out.bytes[0] = in.bytes[3];
+ out.bytes[1] = in.bytes[2];
+ out.bytes[2] = in.bytes[1];
+ out.bytes[3] = in.bytes[0];
+
+ return (out.value);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_set_integer_width
+ *
+ * PARAMETERS: Revision From DSDT header
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Set the global integer bit width based upon the revision
+ * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
+ * For Revision 2 and above, Integers are 64 bits. Yes, this
+ * makes a difference.
+ *
+ ******************************************************************************/
+
+void acpi_ut_set_integer_width(u8 revision)
+{
+
+ if (revision < 2) {
+
+ /* 32-bit case */
+
+ acpi_gbl_integer_bit_width = 32;
+ acpi_gbl_integer_nybble_width = 8;
+ acpi_gbl_integer_byte_width = 4;
+ } else {
+ /* 64-bit case (ACPI 2.0+) */
+
+ acpi_gbl_integer_bit_width = 64;
+ acpi_gbl_integer_nybble_width = 16;
+ acpi_gbl_integer_byte_width = 8;
+ }
+}
+
+#ifdef ACPI_DEBUG_OUTPUT
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_display_init_pathname
+ *
+ * PARAMETERS: Type - Object type of the node
+ * obj_handle - Handle whose pathname will be displayed
+ * Path - Additional path string to be appended.
+ * (NULL if no extra path)
+ *
+ * RETURN: acpi_status
+ *
+ * DESCRIPTION: Display full pathname of an object, DEBUG ONLY
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_display_init_pathname(u8 type,
+ struct acpi_namespace_node *obj_handle,
+ char *path)
+{
+ acpi_status status;
+ struct acpi_buffer buffer;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Only print the path if the appropriate debug level is enabled */
+
+ if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
+ return;
+ }
+
+ /* Get the full pathname to the node */
+
+ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+ status = acpi_ns_handle_to_pathname(obj_handle, &buffer);
+ if (ACPI_FAILURE(status)) {
+ return;
+ }
+
+ /* Print what we're doing */
+
+ switch (type) {
+ case ACPI_TYPE_METHOD:
+ acpi_os_printf("Executing ");
+ break;
+
+ default:
+ acpi_os_printf("Initializing ");
+ break;
+ }
+
+ /* Print the object type and pathname */
+
+ acpi_os_printf("%-12s %s",
+ acpi_ut_get_type_name(type), (char *)buffer.pointer);
+
+ /* Extra path is used to append names like _STA, _INI, etc. */
+
+ if (path) {
+ acpi_os_printf(".%s", path);
+ }
+ acpi_os_printf("\n");
+
+ ACPI_FREE(buffer.pointer);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_valid_acpi_char
+ *
+ * PARAMETERS: Char - The character to be examined
+ * Position - Byte position (0-3)
+ *
+ * RETURN: TRUE if the character is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI character. Must be one of:
+ * 1) Upper case alpha
+ * 2) numeric
+ * 3) underscore
+ *
+ * We allow a '!' as the last character because of the ASF! table
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_char(char character, u32 position)
+{
+
+ if (!((character >= 'A' && character <= 'Z') ||
+ (character >= '0' && character <= '9') || (character == '_'))) {
+
+ /* Allow a '!' in the last position */
+
+ if (character == '!' && position == 3) {
+ return (TRUE);
+ }
+
+ return (FALSE);
+ }
+
+ return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_valid_acpi_name
+ *
+ * PARAMETERS: Name - The name to be examined
+ *
+ * RETURN: TRUE if the name is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
+ * 1) Upper case alpha
+ * 2) numeric
+ * 3) underscore
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_name(u32 name)
+{
+ u32 i;
+
+ ACPI_FUNCTION_ENTRY();
+
+ for (i = 0; i < ACPI_NAME_SIZE; i++) {
+ if (!acpi_ut_valid_acpi_char
+ ((ACPI_CAST_PTR(char, &name))[i], i)) {
+ return (FALSE);
+ }
+ }
+
+ return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_repair_name
+ *
+ * PARAMETERS: Name - The ACPI name to be repaired
+ *
+ * RETURN: Repaired version of the name
+ *
+ * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
+ * return the new name.
+ *
+ ******************************************************************************/
+
+acpi_name acpi_ut_repair_name(char *name)
+{
+ u32 i;
+ char new_name[ACPI_NAME_SIZE];
+
+ for (i = 0; i < ACPI_NAME_SIZE; i++) {
+ new_name[i] = name[i];
+
+ /*
+ * Replace a bad character with something printable, yet technically
+ * still invalid. This prevents any collisions with existing "good"
+ * names in the namespace.
+ */
+ if (!acpi_ut_valid_acpi_char(name[i], i)) {
+ new_name[i] = '*';
+ }
+ }
+
+ return (*(u32 *) new_name);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul64
+ *
+ * PARAMETERS: String - Null terminated string
+ * Base - Radix of the string: 16 or ACPI_ANY_BASE;
+ * ACPI_ANY_BASE means 'in behalf of to_integer'
+ * ret_integer - Where the converted integer is returned
+ *
+ * RETURN: Status and Converted value
+ *
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ * 32-bit or 64-bit conversion, depending on the current mode
+ * of the interpreter.
+ * NOTE: Does not support Octal strings, not needed.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
+{
+ u32 this_digit = 0;
+ u64 return_value = 0;
+ u64 quotient;
+ u64 dividend;
+ u32 to_integer_op = (base == ACPI_ANY_BASE);
+ u32 mode32 = (acpi_gbl_integer_byte_width == 4);
+ u8 valid_digits = 0;
+ u8 sign_of0x = 0;
+ u8 term = 0;
+
+ ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
+
+ switch (base) {
+ case ACPI_ANY_BASE:
+ case 16:
+ break;
+
+ default:
+ /* Invalid Base */
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ if (!string) {
+ goto error_exit;
+ }
+
+ /* Skip over any white space in the buffer */
+
+ while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
+ string++;
+ }
+
+ if (to_integer_op) {
+ /*
+ * Base equal to ACPI_ANY_BASE means 'to_integer operation case'.
+ * We need to determine if it is decimal or hexadecimal.
+ */
+ if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
+ sign_of0x = 1;
+ base = 16;
+
+ /* Skip over the leading '0x' */
+ string += 2;
+ } else {
+ base = 10;
+ }
+ }
+
+ /* Any string left? Check that '0x' is not followed by white space. */
+
+ if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ goto all_done;
+ }
+ }
+
+ /*
+ * Perform a 32-bit or 64-bit conversion, depending upon the current
+ * execution mode of the interpreter
+ */
+ dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
+
+ /* Main loop: convert the string to a 32- or 64-bit integer */
+
+ while (*string) {
+ if (ACPI_IS_DIGIT(*string)) {
+
+ /* Convert ASCII 0-9 to Decimal value */
+
+ this_digit = ((u8) * string) - '0';
+ } else if (base == 10) {
+
+ /* Digit is out of range; possible in to_integer case only */
+
+ term = 1;
+ } else {
+ this_digit = (u8) ACPI_TOUPPER(*string);
+ if (ACPI_IS_XDIGIT((char)this_digit)) {
+
+ /* Convert ASCII Hex char to value */
+
+ this_digit = this_digit - 'A' + 10;
+ } else {
+ term = 1;
+ }
+ }
+
+ if (term) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ } else if ((valid_digits == 0) && (this_digit == 0)
+ && !sign_of0x) {
+
+ /* Skip zeros */
+ string++;
+ continue;
+ }
+
+ valid_digits++;
+
+ if (sign_of0x && ((valid_digits > 16)
+ || ((valid_digits > 8) && mode32))) {
+ /*
+ * This is to_integer operation case.
+ * No any restrictions for string-to-integer conversion,
+ * see ACPI spec.
+ */
+ goto error_exit;
+ }
+
+ /* Divide the digit into the correct position */
+
+ (void)acpi_ut_short_divide((dividend - (u64) this_digit),
+ base, "ient, NULL);
+
+ if (return_value > quotient) {
+ if (to_integer_op) {
+ goto error_exit;
+ } else {
+ break;
+ }
+ }
+
+ return_value *= base;
+ return_value += this_digit;
+ string++;
+ }
+
+ /* All done, normal exit */
+
+ all_done:
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+ ACPI_FORMAT_UINT64(return_value)));
+
+ *ret_integer = return_value;
+ return_ACPI_STATUS(AE_OK);
+
+ error_exit:
+ /* Base was set/validated above */
+
+ if (base == 10) {
+ return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
+ } else {
+ return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_create_update_state_and_push
+ *
+ * PARAMETERS: Object - Object to be added to the new state
+ * Action - Increment/Decrement
+ * state_list - List the state will be added to
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create a new state and push it
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_create_update_state_and_push(union acpi_operand_object *object,
+ u16 action,
+ union acpi_generic_state **state_list)
+{
+ union acpi_generic_state *state;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Ignore null objects; these are expected */
+
+ if (!object) {
+ return (AE_OK);
+ }
+
+ state = acpi_ut_create_update_state(object, action);
+ if (!state) {
+ return (AE_NO_MEMORY);
+ }
+
+ acpi_ut_push_generic_state(state_list, state);
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_walk_package_tree
+ *
+ * PARAMETERS: source_object - The package to walk
+ * target_object - Target object (if package is being copied)
+ * walk_callback - Called once for each package element
+ * Context - Passed to the callback function
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Walk through a package
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
+ void *target_object,
+ acpi_pkg_callback walk_callback, void *context)
+{
+ acpi_status status = AE_OK;
+ union acpi_generic_state *state_list = NULL;
+ union acpi_generic_state *state;
+ u32 this_index;
+ union acpi_operand_object *this_source_obj;
+
+ ACPI_FUNCTION_TRACE(ut_walk_package_tree);
+
+ state = acpi_ut_create_pkg_state(source_object, target_object, 0);
+ if (!state) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ while (state) {
+
+ /* Get one element of the package */
+
+ this_index = state->pkg.index;
+ this_source_obj = (union acpi_operand_object *)
+ state->pkg.source_object->package.elements[this_index];
+
+ /*
+ * Check for:
+ * 1) An uninitialized package element. It is completely
+ * legal to declare a package and leave it uninitialized
+ * 2) Not an internal object - can be a namespace node instead
+ * 3) Any type other than a package. Packages are handled in else
+ * case below.
+ */
+ if ((!this_source_obj) ||
+ (ACPI_GET_DESCRIPTOR_TYPE(this_source_obj) !=
+ ACPI_DESC_TYPE_OPERAND)
+ || (this_source_obj->common.type != ACPI_TYPE_PACKAGE)) {
+ status =
+ walk_callback(ACPI_COPY_TYPE_SIMPLE,
+ this_source_obj, state, context);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ state->pkg.index++;
+ while (state->pkg.index >=
+ state->pkg.source_object->package.count) {
+ /*
+ * We've handled all of the objects at this level, This means
+ * that we have just completed a package. That package may
+ * have contained one or more packages itself.
+ *
+ * Delete this state and pop the previous state (package).
+ */
+ acpi_ut_delete_generic_state(state);
+ state = acpi_ut_pop_generic_state(&state_list);
+
+ /* Finished when there are no more states */
+
+ if (!state) {
+ /*
+ * We have handled all of the objects in the top level
+ * package just add the length of the package objects
+ * and exit
+ */
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /*
+ * Go back up a level and move the index past the just
+ * completed package object.
+ */
+ state->pkg.index++;
+ }
+ } else {
+ /* This is a subobject of type package */
+
+ status =
+ walk_callback(ACPI_COPY_TYPE_PACKAGE,
+ this_source_obj, state, context);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Push the current state and create a new one
+ * The callback above returned a new target package object.
+ */
+ acpi_ut_push_generic_state(&state_list, state);
+ state = acpi_ut_create_pkg_state(this_source_obj,
+ state->pkg.
+ this_target_obj, 0);
+ if (!state) {
+
+ /* Free any stacked Update State objects */
+
+ while (state_list) {
+ state =
+ acpi_ut_pop_generic_state
+ (&state_list);
+ acpi_ut_delete_generic_state(state);
+ }
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+ }
+ }
+
+ /* We should never get here */
+
+ return_ACPI_STATUS(AE_AML_INTERNAL);
+}