zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/ata/sata_mv.c b/ap/os/linux/linux-3.4.x/drivers/ata/sata_mv.c
new file mode 100644
index 0000000..7336d4a
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/ata/sata_mv.c
@@ -0,0 +1,4417 @@
+/*
+ * sata_mv.c - Marvell SATA support
+ *
+ * Copyright 2008-2009: Marvell Corporation, all rights reserved.
+ * Copyright 2005: EMC Corporation, all rights reserved.
+ * Copyright 2005 Red Hat, Inc. All rights reserved.
+ *
+ * Originally written by Brett Russ.
+ * Extensive overhaul and enhancement by Mark Lord <mlord@pobox.com>.
+ *
+ * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*
+ * sata_mv TODO list:
+ *
+ * --> Develop a low-power-consumption strategy, and implement it.
+ *
+ * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds.
+ *
+ * --> [Experiment, Marvell value added] Is it possible to use target
+ * mode to cross-connect two Linux boxes with Marvell cards? If so,
+ * creating LibATA target mode support would be very interesting.
+ *
+ * Target mode, for those without docs, is the ability to directly
+ * connect two SATA ports.
+ */
+
+/*
+ * 80x1-B2 errata PCI#11:
+ *
+ * Users of the 6041/6081 Rev.B2 chips (current is C0)
+ * should be careful to insert those cards only onto PCI-X bus #0,
+ * and only in device slots 0..7, not higher. The chips may not
+ * work correctly otherwise (note: this is a pretty rare condition).
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mbus.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "sata_mv"
+#define DRV_VERSION "1.28"
+
+/*
+ * module options
+ */
+
+static int msi;
+#ifdef CONFIG_PCI
+module_param(msi, int, S_IRUGO);
+MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+#endif
+
+static int irq_coalescing_io_count;
+module_param(irq_coalescing_io_count, int, S_IRUGO);
+MODULE_PARM_DESC(irq_coalescing_io_count,
+ "IRQ coalescing I/O count threshold (0..255)");
+
+static int irq_coalescing_usecs;
+module_param(irq_coalescing_usecs, int, S_IRUGO);
+MODULE_PARM_DESC(irq_coalescing_usecs,
+ "IRQ coalescing time threshold in usecs");
+
+enum {
+ /* BAR's are enumerated in terms of pci_resource_start() terms */
+ MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */
+ MV_IO_BAR = 2, /* offset 0x18: IO space */
+ MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */
+
+ MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */
+ MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */
+
+ /* For use with both IRQ coalescing methods ("all ports" or "per-HC" */
+ COAL_CLOCKS_PER_USEC = 150, /* for calculating COAL_TIMEs */
+ MAX_COAL_TIME_THRESHOLD = ((1 << 24) - 1), /* internal clocks count */
+ MAX_COAL_IO_COUNT = 255, /* completed I/O count */
+
+ MV_PCI_REG_BASE = 0,
+
+ /*
+ * Per-chip ("all ports") interrupt coalescing feature.
+ * This is only for GEN_II / GEN_IIE hardware.
+ *
+ * Coalescing defers the interrupt until either the IO_THRESHOLD
+ * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
+ */
+ COAL_REG_BASE = 0x18000,
+ IRQ_COAL_CAUSE = (COAL_REG_BASE + 0x08),
+ ALL_PORTS_COAL_IRQ = (1 << 4), /* all ports irq event */
+
+ IRQ_COAL_IO_THRESHOLD = (COAL_REG_BASE + 0xcc),
+ IRQ_COAL_TIME_THRESHOLD = (COAL_REG_BASE + 0xd0),
+
+ /*
+ * Registers for the (unused here) transaction coalescing feature:
+ */
+ TRAN_COAL_CAUSE_LO = (COAL_REG_BASE + 0x88),
+ TRAN_COAL_CAUSE_HI = (COAL_REG_BASE + 0x8c),
+
+ SATAHC0_REG_BASE = 0x20000,
+ FLASH_CTL = 0x1046c,
+ GPIO_PORT_CTL = 0x104f0,
+ RESET_CFG = 0x180d8,
+
+ MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ,
+ MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ,
+ MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
+ MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
+
+ MV_MAX_Q_DEPTH = 32,
+ MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
+
+ /* CRQB needs alignment on a 1KB boundary. Size == 1KB
+ * CRPB needs alignment on a 256B boundary. Size == 256B
+ * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B
+ */
+ MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH),
+ MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH),
+ MV_MAX_SG_CT = 256,
+ MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT),
+
+ /* Determine hc from 0-7 port: hc = port >> MV_PORT_HC_SHIFT */
+ MV_PORT_HC_SHIFT = 2,
+ MV_PORTS_PER_HC = (1 << MV_PORT_HC_SHIFT), /* 4 */
+ /* Determine hc port from 0-7 port: hardport = port & MV_PORT_MASK */
+ MV_PORT_MASK = (MV_PORTS_PER_HC - 1), /* 3 */
+
+ /* Host Flags */
+ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
+
+ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_POLLING,
+
+ MV_GEN_I_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI,
+
+ MV_GEN_II_FLAGS = MV_COMMON_FLAGS | ATA_FLAG_NCQ |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA,
+
+ MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN,
+
+ CRQB_FLAG_READ = (1 << 0),
+ CRQB_TAG_SHIFT = 1,
+ CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
+ CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */
+ CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
+ CRQB_CMD_ADDR_SHIFT = 8,
+ CRQB_CMD_CS = (0x2 << 11),
+ CRQB_CMD_LAST = (1 << 15),
+
+ CRPB_FLAG_STATUS_SHIFT = 8,
+ CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */
+ CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */
+
+ EPRD_FLAG_END_OF_TBL = (1 << 31),
+
+ /* PCI interface registers */
+
+ MV_PCI_COMMAND = 0xc00,
+ MV_PCI_COMMAND_MWRCOM = (1 << 4), /* PCI Master Write Combining */
+ MV_PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */
+
+ PCI_MAIN_CMD_STS = 0xd30,
+ STOP_PCI_MASTER = (1 << 2),
+ PCI_MASTER_EMPTY = (1 << 3),
+ GLOB_SFT_RST = (1 << 4),
+
+ MV_PCI_MODE = 0xd00,
+ MV_PCI_MODE_MASK = 0x30,
+
+ MV_PCI_EXP_ROM_BAR_CTL = 0xd2c,
+ MV_PCI_DISC_TIMER = 0xd04,
+ MV_PCI_MSI_TRIGGER = 0xc38,
+ MV_PCI_SERR_MASK = 0xc28,
+ MV_PCI_XBAR_TMOUT = 0x1d04,
+ MV_PCI_ERR_LOW_ADDRESS = 0x1d40,
+ MV_PCI_ERR_HIGH_ADDRESS = 0x1d44,
+ MV_PCI_ERR_ATTRIBUTE = 0x1d48,
+ MV_PCI_ERR_COMMAND = 0x1d50,
+
+ PCI_IRQ_CAUSE = 0x1d58,
+ PCI_IRQ_MASK = 0x1d5c,
+ PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */
+
+ PCIE_IRQ_CAUSE = 0x1900,
+ PCIE_IRQ_MASK = 0x1910,
+ PCIE_UNMASK_ALL_IRQS = 0x40a, /* assorted bits */
+
+ /* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */
+ PCI_HC_MAIN_IRQ_CAUSE = 0x1d60,
+ PCI_HC_MAIN_IRQ_MASK = 0x1d64,
+ SOC_HC_MAIN_IRQ_CAUSE = 0x20020,
+ SOC_HC_MAIN_IRQ_MASK = 0x20024,
+ ERR_IRQ = (1 << 0), /* shift by (2 * port #) */
+ DONE_IRQ = (1 << 1), /* shift by (2 * port #) */
+ HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */
+ HC_SHIFT = 9, /* bits 9-17 = HC1's ports */
+ DONE_IRQ_0_3 = 0x000000aa, /* DONE_IRQ ports 0,1,2,3 */
+ DONE_IRQ_4_7 = (DONE_IRQ_0_3 << HC_SHIFT), /* 4,5,6,7 */
+ PCI_ERR = (1 << 18),
+ TRAN_COAL_LO_DONE = (1 << 19), /* transaction coalescing */
+ TRAN_COAL_HI_DONE = (1 << 20), /* transaction coalescing */
+ PORTS_0_3_COAL_DONE = (1 << 8), /* HC0 IRQ coalescing */
+ PORTS_4_7_COAL_DONE = (1 << 17), /* HC1 IRQ coalescing */
+ ALL_PORTS_COAL_DONE = (1 << 21), /* GEN_II(E) IRQ coalescing */
+ GPIO_INT = (1 << 22),
+ SELF_INT = (1 << 23),
+ TWSI_INT = (1 << 24),
+ HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
+ HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
+ HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
+
+ /* SATAHC registers */
+ HC_CFG = 0x00,
+
+ HC_IRQ_CAUSE = 0x14,
+ DMA_IRQ = (1 << 0), /* shift by port # */
+ HC_COAL_IRQ = (1 << 4), /* IRQ coalescing */
+ DEV_IRQ = (1 << 8), /* shift by port # */
+
+ /*
+ * Per-HC (Host-Controller) interrupt coalescing feature.
+ * This is present on all chip generations.
+ *
+ * Coalescing defers the interrupt until either the IO_THRESHOLD
+ * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
+ */
+ HC_IRQ_COAL_IO_THRESHOLD = 0x000c,
+ HC_IRQ_COAL_TIME_THRESHOLD = 0x0010,
+
+ SOC_LED_CTRL = 0x2c,
+ SOC_LED_CTRL_BLINK = (1 << 0), /* Active LED blink */
+ SOC_LED_CTRL_ACT_PRESENCE = (1 << 2), /* Multiplex dev presence */
+ /* with dev activity LED */
+
+ /* Shadow block registers */
+ SHD_BLK = 0x100,
+ SHD_CTL_AST = 0x20, /* ofs from SHD_BLK */
+
+ /* SATA registers */
+ SATA_STATUS = 0x300, /* ctrl, err regs follow status */
+ SATA_ACTIVE = 0x350,
+ FIS_IRQ_CAUSE = 0x364,
+ FIS_IRQ_CAUSE_AN = (1 << 9), /* async notification */
+
+ LTMODE = 0x30c, /* requires read-after-write */
+ LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
+
+ PHY_MODE2 = 0x330,
+ PHY_MODE3 = 0x310,
+
+ PHY_MODE4 = 0x314, /* requires read-after-write */
+ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */
+ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */
+ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */
+ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */
+
+ SATA_IFCTL = 0x344,
+ SATA_TESTCTL = 0x348,
+ SATA_IFSTAT = 0x34c,
+ VENDOR_UNIQUE_FIS = 0x35c,
+
+ FISCFG = 0x360,
+ FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
+ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+
+ PHY_MODE9_GEN2 = 0x398,
+ PHY_MODE9_GEN1 = 0x39c,
+ PHYCFG_OFS = 0x3a0, /* only in 65n devices */
+
+ MV5_PHY_MODE = 0x74,
+ MV5_LTMODE = 0x30,
+ MV5_PHY_CTL = 0x0C,
+ SATA_IFCFG = 0x050,
+
+ MV_M2_PREAMP_MASK = 0x7e0,
+
+ /* Port registers */
+ EDMA_CFG = 0,
+ EDMA_CFG_Q_DEPTH = 0x1f, /* max device queue depth */
+ EDMA_CFG_NCQ = (1 << 5), /* for R/W FPDMA queued */
+ EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
+ EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
+ EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */
+ EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */
+
+ EDMA_ERR_IRQ_CAUSE = 0x8,
+ EDMA_ERR_IRQ_MASK = 0xc,
+ EDMA_ERR_D_PAR = (1 << 0), /* UDMA data parity err */
+ EDMA_ERR_PRD_PAR = (1 << 1), /* UDMA PRD parity err */
+ EDMA_ERR_DEV = (1 << 2), /* device error */
+ EDMA_ERR_DEV_DCON = (1 << 3), /* device disconnect */
+ EDMA_ERR_DEV_CON = (1 << 4), /* device connected */
+ EDMA_ERR_SERR = (1 << 5), /* SError bits [WBDST] raised */
+ EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */
+ EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */
+ EDMA_ERR_BIST_ASYNC = (1 << 8), /* BIST FIS or Async Notify */
+ EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */
+ EDMA_ERR_CRQB_PAR = (1 << 9), /* CRQB parity error */
+ EDMA_ERR_CRPB_PAR = (1 << 10), /* CRPB parity error */
+ EDMA_ERR_INTRL_PAR = (1 << 11), /* internal parity error */
+ EDMA_ERR_IORDY = (1 << 12), /* IORdy timeout */
+
+ EDMA_ERR_LNK_CTRL_RX = (0xf << 13), /* link ctrl rx error */
+ EDMA_ERR_LNK_CTRL_RX_0 = (1 << 13), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_RX_1 = (1 << 14), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), /* fatal: caught SYNC */
+ EDMA_ERR_LNK_CTRL_RX_3 = (1 << 16), /* transient: FIS rx err */
+
+ EDMA_ERR_LNK_DATA_RX = (0xf << 17), /* link data rx error */
+
+ EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), /* link ctrl tx error */
+ EDMA_ERR_LNK_CTRL_TX_0 = (1 << 21), /* transient: CRC err */
+ EDMA_ERR_LNK_CTRL_TX_1 = (1 << 22), /* transient: FIFO err */
+ EDMA_ERR_LNK_CTRL_TX_2 = (1 << 23), /* transient: caught SYNC */
+ EDMA_ERR_LNK_CTRL_TX_3 = (1 << 24), /* transient: caught DMAT */
+ EDMA_ERR_LNK_CTRL_TX_4 = (1 << 25), /* transient: FIS collision */
+
+ EDMA_ERR_LNK_DATA_TX = (0x1f << 26), /* link data tx error */
+
+ EDMA_ERR_TRANS_PROTO = (1 << 31), /* transport protocol error */
+ EDMA_ERR_OVERRUN_5 = (1 << 5),
+ EDMA_ERR_UNDERRUN_5 = (1 << 6),
+
+ EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 |
+ EDMA_ERR_LNK_CTRL_RX_1 |
+ EDMA_ERR_LNK_CTRL_RX_3 |
+ EDMA_ERR_LNK_CTRL_TX,
+
+ EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
+ EDMA_ERR_PRD_PAR |
+ EDMA_ERR_DEV_DCON |
+ EDMA_ERR_DEV_CON |
+ EDMA_ERR_SERR |
+ EDMA_ERR_SELF_DIS |
+ EDMA_ERR_CRQB_PAR |
+ EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR |
+ EDMA_ERR_IORDY |
+ EDMA_ERR_LNK_CTRL_RX_2 |
+ EDMA_ERR_LNK_DATA_RX |
+ EDMA_ERR_LNK_DATA_TX |
+ EDMA_ERR_TRANS_PROTO,
+
+ EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
+ EDMA_ERR_PRD_PAR |
+ EDMA_ERR_DEV_DCON |
+ EDMA_ERR_DEV_CON |
+ EDMA_ERR_OVERRUN_5 |
+ EDMA_ERR_UNDERRUN_5 |
+ EDMA_ERR_SELF_DIS_5 |
+ EDMA_ERR_CRQB_PAR |
+ EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR |
+ EDMA_ERR_IORDY,
+
+ EDMA_REQ_Q_BASE_HI = 0x10,
+ EDMA_REQ_Q_IN_PTR = 0x14, /* also contains BASE_LO */
+
+ EDMA_REQ_Q_OUT_PTR = 0x18,
+ EDMA_REQ_Q_PTR_SHIFT = 5,
+
+ EDMA_RSP_Q_BASE_HI = 0x1c,
+ EDMA_RSP_Q_IN_PTR = 0x20,
+ EDMA_RSP_Q_OUT_PTR = 0x24, /* also contains BASE_LO */
+ EDMA_RSP_Q_PTR_SHIFT = 3,
+
+ EDMA_CMD = 0x28, /* EDMA command register */
+ EDMA_EN = (1 << 0), /* enable EDMA */
+ EDMA_DS = (1 << 1), /* disable EDMA; self-negated */
+ EDMA_RESET = (1 << 2), /* reset eng/trans/link/phy */
+
+ EDMA_STATUS = 0x30, /* EDMA engine status */
+ EDMA_STATUS_CACHE_EMPTY = (1 << 6), /* GenIIe command cache empty */
+ EDMA_STATUS_IDLE = (1 << 7), /* GenIIe EDMA enabled/idle */
+
+ EDMA_IORDY_TMOUT = 0x34,
+ EDMA_ARB_CFG = 0x38,
+
+ EDMA_HALTCOND = 0x60, /* GenIIe halt conditions */
+ EDMA_UNKNOWN_RSVD = 0x6C, /* GenIIe unknown/reserved */
+
+ BMDMA_CMD = 0x224, /* bmdma command register */
+ BMDMA_STATUS = 0x228, /* bmdma status register */
+ BMDMA_PRD_LOW = 0x22c, /* bmdma PRD addr 31:0 */
+ BMDMA_PRD_HIGH = 0x230, /* bmdma PRD addr 63:32 */
+
+ /* Host private flags (hp_flags) */
+ MV_HP_FLAG_MSI = (1 << 0),
+ MV_HP_ERRATA_50XXB0 = (1 << 1),
+ MV_HP_ERRATA_50XXB2 = (1 << 2),
+ MV_HP_ERRATA_60X1B2 = (1 << 3),
+ MV_HP_ERRATA_60X1C0 = (1 << 4),
+ MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
+ MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
+ MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
+ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
+ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
+ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
+ MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */
+
+ /* Port private flags (pp_flags) */
+ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
+ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
+ MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */
+ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */
+ MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4), /* ignore initial ATA_DRDY */
+};
+
+#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
+#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
+#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
+#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
+#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
+
+#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
+#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
+
+enum {
+ /* DMA boundary 0xffff is required by the s/g splitting
+ * we need on /length/ in mv_fill-sg().
+ */
+ MV_DMA_BOUNDARY = 0xffffU,
+
+ /* mask of register bits containing lower 32 bits
+ * of EDMA request queue DMA address
+ */
+ EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U,
+
+ /* ditto, for response queue */
+ EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U,
+};
+
+enum chip_type {
+ chip_504x,
+ chip_508x,
+ chip_5080,
+ chip_604x,
+ chip_608x,
+ chip_6042,
+ chip_7042,
+ chip_soc,
+};
+
+/* Command ReQuest Block: 32B */
+struct mv_crqb {
+ __le32 sg_addr;
+ __le32 sg_addr_hi;
+ __le16 ctrl_flags;
+ __le16 ata_cmd[11];
+};
+
+struct mv_crqb_iie {
+ __le32 addr;
+ __le32 addr_hi;
+ __le32 flags;
+ __le32 len;
+ __le32 ata_cmd[4];
+};
+
+/* Command ResPonse Block: 8B */
+struct mv_crpb {
+ __le16 id;
+ __le16 flags;
+ __le32 tmstmp;
+};
+
+/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */
+struct mv_sg {
+ __le32 addr;
+ __le32 flags_size;
+ __le32 addr_hi;
+ __le32 reserved;
+};
+
+/*
+ * We keep a local cache of a few frequently accessed port
+ * registers here, to avoid having to read them (very slow)
+ * when switching between EDMA and non-EDMA modes.
+ */
+struct mv_cached_regs {
+ u32 fiscfg;
+ u32 ltmode;
+ u32 haltcond;
+ u32 unknown_rsvd;
+};
+
+struct mv_port_priv {
+ struct mv_crqb *crqb;
+ dma_addr_t crqb_dma;
+ struct mv_crpb *crpb;
+ dma_addr_t crpb_dma;
+ struct mv_sg *sg_tbl[MV_MAX_Q_DEPTH];
+ dma_addr_t sg_tbl_dma[MV_MAX_Q_DEPTH];
+
+ unsigned int req_idx;
+ unsigned int resp_idx;
+
+ u32 pp_flags;
+ struct mv_cached_regs cached;
+ unsigned int delayed_eh_pmp_map;
+};
+
+struct mv_port_signal {
+ u32 amps;
+ u32 pre;
+};
+
+struct mv_host_priv {
+ u32 hp_flags;
+ unsigned int board_idx;
+ u32 main_irq_mask;
+ struct mv_port_signal signal[8];
+ const struct mv_hw_ops *ops;
+ int n_ports;
+ void __iomem *base;
+ void __iomem *main_irq_cause_addr;
+ void __iomem *main_irq_mask_addr;
+ u32 irq_cause_offset;
+ u32 irq_mask_offset;
+ u32 unmask_all_irqs;
+
+#if defined(CONFIG_HAVE_CLK)
+ struct clk *clk;
+#endif
+ /*
+ * These consistent DMA memory pools give us guaranteed
+ * alignment for hardware-accessed data structures,
+ * and less memory waste in accomplishing the alignment.
+ */
+ struct dma_pool *crqb_pool;
+ struct dma_pool *crpb_pool;
+ struct dma_pool *sg_tbl_pool;
+};
+
+struct mv_hw_ops {
+ void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
+ void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio);
+ void (*read_preamp)(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+ int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc);
+ void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio);
+ void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
+};
+
+static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val);
+static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val);
+static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val);
+static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val);
+static int mv_port_start(struct ata_port *ap);
+static void mv_port_stop(struct ata_port *ap);
+static int mv_qc_defer(struct ata_queued_cmd *qc);
+static void mv_qc_prep(struct ata_queued_cmd *qc);
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
+static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void mv_eh_freeze(struct ata_port *ap);
+static void mv_eh_thaw(struct ata_port *ap);
+static void mv6_dev_config(struct ata_device *dev);
+
+static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
+static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc);
+static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio);
+
+static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port);
+static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc);
+static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
+static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
+ void __iomem *mmio);
+static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio);
+static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int n_hc);
+static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
+ void __iomem *mmio);
+static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port);
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port_no);
+static int mv_stop_edma(struct ata_port *ap);
+static int mv_stop_edma_engine(void __iomem *port_mmio);
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma);
+
+static void mv_pmp_select(struct ata_port *ap, int pmp);
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void mv_pmp_error_handler(struct ata_port *ap);
+static void mv_process_crpb_entries(struct ata_port *ap,
+ struct mv_port_priv *pp);
+
+static void mv_sff_irq_clear(struct ata_port *ap);
+static int mv_check_atapi_dma(struct ata_queued_cmd *qc);
+static void mv_bmdma_setup(struct ata_queued_cmd *qc);
+static void mv_bmdma_start(struct ata_queued_cmd *qc);
+static void mv_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 mv_bmdma_status(struct ata_port *ap);
+static u8 mv_sff_check_status(struct ata_port *ap);
+
+/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
+ * because we have to allow room for worst case splitting of
+ * PRDs for 64K boundaries in mv_fill_sg().
+ */
+static struct scsi_host_template mv5_sht = {
+ ATA_BASE_SHT(DRV_NAME),
+ .sg_tablesize = MV_MAX_SG_CT / 2,
+ .dma_boundary = MV_DMA_BOUNDARY,
+};
+
+static struct scsi_host_template mv6_sht = {
+ ATA_NCQ_SHT(DRV_NAME),
+ .can_queue = MV_MAX_Q_DEPTH - 1,
+ .sg_tablesize = MV_MAX_SG_CT / 2,
+ .dma_boundary = MV_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations mv5_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .lost_interrupt = ATA_OP_NULL,
+
+ .qc_defer = mv_qc_defer,
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
+
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+ .hardreset = mv_hardreset,
+
+ .scr_read = mv5_scr_read,
+ .scr_write = mv5_scr_write,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+};
+
+static struct ata_port_operations mv6_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .lost_interrupt = ATA_OP_NULL,
+
+ .qc_defer = mv_qc_defer,
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
+
+ .dev_config = mv6_dev_config,
+
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+ .hardreset = mv_hardreset,
+ .softreset = mv_softreset,
+ .pmp_hardreset = mv_pmp_hardreset,
+ .pmp_softreset = mv_softreset,
+ .error_handler = mv_pmp_error_handler,
+
+ .scr_read = mv_scr_read,
+ .scr_write = mv_scr_write,
+
+ .sff_check_status = mv_sff_check_status,
+ .sff_irq_clear = mv_sff_irq_clear,
+ .check_atapi_dma = mv_check_atapi_dma,
+ .bmdma_setup = mv_bmdma_setup,
+ .bmdma_start = mv_bmdma_start,
+ .bmdma_stop = mv_bmdma_stop,
+ .bmdma_status = mv_bmdma_status,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+};
+
+static struct ata_port_operations mv_iie_ops = {
+ .inherits = &mv6_ops,
+ .dev_config = ATA_OP_NULL,
+ .qc_prep = mv_qc_prep_iie,
+};
+
+static const struct ata_port_info mv_port_info[] = {
+ { /* chip_504x */
+ .flags = MV_GEN_I_FLAGS,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv5_ops,
+ },
+ { /* chip_508x */
+ .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv5_ops,
+ },
+ { /* chip_5080 */
+ .flags = MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv5_ops,
+ },
+ { /* chip_604x */
+ .flags = MV_GEN_II_FLAGS,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv6_ops,
+ },
+ { /* chip_608x */
+ .flags = MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv6_ops,
+ },
+ { /* chip_6042 */
+ .flags = MV_GEN_IIE_FLAGS,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv_iie_ops,
+ },
+ { /* chip_7042 */
+ .flags = MV_GEN_IIE_FLAGS,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv_iie_ops,
+ },
+ { /* chip_soc */
+ .flags = MV_GEN_IIE_FLAGS,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv_iie_ops,
+ },
+};
+
+static const struct pci_device_id mv_pci_tbl[] = {
+ { PCI_VDEVICE(MARVELL, 0x5040), chip_504x },
+ { PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
+ { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
+ { PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
+ /* RocketRAID 1720/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
+ { PCI_VDEVICE(TTI, 0x1740), chip_6042 },
+ { PCI_VDEVICE(TTI, 0x1742), chip_6042 },
+
+ { PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
+ { PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
+ { PCI_VDEVICE(MARVELL, 0x6042), chip_6042 },
+ { PCI_VDEVICE(MARVELL, 0x6080), chip_608x },
+ { PCI_VDEVICE(MARVELL, 0x6081), chip_608x },
+
+ { PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
+
+ /* Adaptec 1430SA */
+ { PCI_VDEVICE(ADAPTEC2, 0x0243), chip_7042 },
+
+ /* Marvell 7042 support */
+ { PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
+
+ /* Highpoint RocketRAID PCIe series */
+ { PCI_VDEVICE(TTI, 0x2300), chip_7042 },
+ { PCI_VDEVICE(TTI, 0x2310), chip_7042 },
+
+ { } /* terminate list */
+};
+
+static const struct mv_hw_ops mv5xxx_ops = {
+ .phy_errata = mv5_phy_errata,
+ .enable_leds = mv5_enable_leds,
+ .read_preamp = mv5_read_preamp,
+ .reset_hc = mv5_reset_hc,
+ .reset_flash = mv5_reset_flash,
+ .reset_bus = mv5_reset_bus,
+};
+
+static const struct mv_hw_ops mv6xxx_ops = {
+ .phy_errata = mv6_phy_errata,
+ .enable_leds = mv6_enable_leds,
+ .read_preamp = mv6_read_preamp,
+ .reset_hc = mv6_reset_hc,
+ .reset_flash = mv6_reset_flash,
+ .reset_bus = mv_reset_pci_bus,
+};
+
+static const struct mv_hw_ops mv_soc_ops = {
+ .phy_errata = mv6_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .read_preamp = mv_soc_read_preamp,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
+
+static const struct mv_hw_ops mv_soc_65n_ops = {
+ .phy_errata = mv_soc_65n_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
+
+/*
+ * Functions
+ */
+
+static inline void writelfl(unsigned long data, void __iomem *addr)
+{
+ writel(data, addr);
+ (void) readl(addr); /* flush to avoid PCI posted write */
+}
+
+static inline unsigned int mv_hc_from_port(unsigned int port)
+{
+ return port >> MV_PORT_HC_SHIFT;
+}
+
+static inline unsigned int mv_hardport_from_port(unsigned int port)
+{
+ return port & MV_PORT_MASK;
+}
+
+/*
+ * Consolidate some rather tricky bit shift calculations.
+ * This is hot-path stuff, so not a function.
+ * Simple code, with two return values, so macro rather than inline.
+ *
+ * port is the sole input, in range 0..7.
+ * shift is one output, for use with main_irq_cause / main_irq_mask registers.
+ * hardport is the other output, in range 0..3.
+ *
+ * Note that port and hardport may be the same variable in some cases.
+ */
+#define MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport) \
+{ \
+ shift = mv_hc_from_port(port) * HC_SHIFT; \
+ hardport = mv_hardport_from_port(port); \
+ shift += hardport * 2; \
+}
+
+static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
+{
+ return (base + SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
+}
+
+static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
+ unsigned int port)
+{
+ return mv_hc_base(base, mv_hc_from_port(port));
+}
+
+static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
+{
+ return mv_hc_base_from_port(base, port) +
+ MV_SATAHC_ARBTR_REG_SZ +
+ (mv_hardport_from_port(port) * MV_PORT_REG_SZ);
+}
+
+static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
+{
+ void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
+ unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
+
+ return hc_mmio + ofs;
+}
+
+static inline void __iomem *mv_host_base(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ return hpriv->base;
+}
+
+static inline void __iomem *mv_ap_base(struct ata_port *ap)
+{
+ return mv_port_base(mv_host_base(ap->host), ap->port_no);
+}
+
+static inline int mv_get_hc_count(unsigned long port_flags)
+{
+ return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
+}
+
+/**
+ * mv_save_cached_regs - (re-)initialize cached port registers
+ * @ap: the port whose registers we are caching
+ *
+ * Initialize the local cache of port registers,
+ * so that reading them over and over again can
+ * be avoided on the hotter paths of this driver.
+ * This saves a few microseconds each time we switch
+ * to/from EDMA mode to perform (eg.) a drive cache flush.
+ */
+static void mv_save_cached_regs(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+
+ pp->cached.fiscfg = readl(port_mmio + FISCFG);
+ pp->cached.ltmode = readl(port_mmio + LTMODE);
+ pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND);
+ pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD);
+}
+
+/**
+ * mv_write_cached_reg - write to a cached port register
+ * @addr: hardware address of the register
+ * @old: pointer to cached value of the register
+ * @new: new value for the register
+ *
+ * Write a new value to a cached register,
+ * but only if the value is different from before.
+ */
+static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new)
+{
+ if (new != *old) {
+ unsigned long laddr;
+ *old = new;
+ /*
+ * Workaround for 88SX60x1-B2 FEr SATA#13:
+ * Read-after-write is needed to prevent generating 64-bit
+ * write cycles on the PCI bus for SATA interface registers
+ * at offsets ending in 0x4 or 0xc.
+ *
+ * Looks like a lot of fuss, but it avoids an unnecessary
+ * +1 usec read-after-write delay for unaffected registers.
+ */
+ laddr = (long)addr & 0xffff;
+ if (laddr >= 0x300 && laddr <= 0x33c) {
+ laddr &= 0x000f;
+ if (laddr == 0x4 || laddr == 0xc) {
+ writelfl(new, addr); /* read after write */
+ return;
+ }
+ }
+ writel(new, addr); /* unaffected by the errata */
+ }
+}
+
+static void mv_set_edma_ptrs(void __iomem *port_mmio,
+ struct mv_host_priv *hpriv,
+ struct mv_port_priv *pp)
+{
+ u32 index;
+
+ /*
+ * initialize request queue
+ */
+ pp->req_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
+ index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
+
+ WARN_ON(pp->crqb_dma & 0x3ff);
+ writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI);
+ writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
+ port_mmio + EDMA_REQ_Q_IN_PTR);
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR);
+
+ /*
+ * initialize response queue
+ */
+ pp->resp_idx &= MV_MAX_Q_DEPTH_MASK; /* paranoia */
+ index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT;
+
+ WARN_ON(pp->crpb_dma & 0xff);
+ writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI);
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR);
+ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
+ port_mmio + EDMA_RSP_Q_OUT_PTR);
+}
+
+static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv)
+{
+ /*
+ * When writing to the main_irq_mask in hardware,
+ * we must ensure exclusivity between the interrupt coalescing bits
+ * and the corresponding individual port DONE_IRQ bits.
+ *
+ * Note that this register is really an "IRQ enable" register,
+ * not an "IRQ mask" register as Marvell's naming might suggest.
+ */
+ if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE))
+ mask &= ~DONE_IRQ_0_3;
+ if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE))
+ mask &= ~DONE_IRQ_4_7;
+ writelfl(mask, hpriv->main_irq_mask_addr);
+}
+
+static void mv_set_main_irq_mask(struct ata_host *host,
+ u32 disable_bits, u32 enable_bits)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ u32 old_mask, new_mask;
+
+ old_mask = hpriv->main_irq_mask;
+ new_mask = (old_mask & ~disable_bits) | enable_bits;
+ if (new_mask != old_mask) {
+ hpriv->main_irq_mask = new_mask;
+ mv_write_main_irq_mask(new_mask, hpriv);
+ }
+}
+
+static void mv_enable_port_irqs(struct ata_port *ap,
+ unsigned int port_bits)
+{
+ unsigned int shift, hardport, port = ap->port_no;
+ u32 disable_bits, enable_bits;
+
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+
+ disable_bits = (DONE_IRQ | ERR_IRQ) << shift;
+ enable_bits = port_bits << shift;
+ mv_set_main_irq_mask(ap->host, disable_bits, enable_bits);
+}
+
+static void mv_clear_and_enable_port_irqs(struct ata_port *ap,
+ void __iomem *port_mmio,
+ unsigned int port_irqs)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ int hardport = mv_hardport_from_port(ap->port_no);
+ void __iomem *hc_mmio = mv_hc_base_from_port(
+ mv_host_base(ap->host), ap->port_no);
+ u32 hc_irq_cause;
+
+ /* clear EDMA event indicators, if any */
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE);
+
+ /* clear pending irq events */
+ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+ writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE);
+
+ /* clear FIS IRQ Cause */
+ if (IS_GEN_IIE(hpriv))
+ writelfl(0, port_mmio + FIS_IRQ_CAUSE);
+
+ mv_enable_port_irqs(ap, port_irqs);
+}
+
+static void mv_set_irq_coalescing(struct ata_host *host,
+ unsigned int count, unsigned int usecs)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base, *hc_mmio;
+ u32 coal_enable = 0;
+ unsigned long flags;
+ unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC;
+ const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
+ ALL_PORTS_COAL_DONE;
+
+ /* Disable IRQ coalescing if either threshold is zero */
+ if (!usecs || !count) {
+ clks = count = 0;
+ } else {
+ /* Respect maximum limits of the hardware */
+ clks = usecs * COAL_CLOCKS_PER_USEC;
+ if (clks > MAX_COAL_TIME_THRESHOLD)
+ clks = MAX_COAL_TIME_THRESHOLD;
+ if (count > MAX_COAL_IO_COUNT)
+ count = MAX_COAL_IO_COUNT;
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+ mv_set_main_irq_mask(host, coal_disable, 0);
+
+ if (is_dual_hc && !IS_GEN_I(hpriv)) {
+ /*
+ * GEN_II/GEN_IIE with dual host controllers:
+ * one set of global thresholds for the entire chip.
+ */
+ writel(clks, mmio + IRQ_COAL_TIME_THRESHOLD);
+ writel(count, mmio + IRQ_COAL_IO_THRESHOLD);
+ /* clear leftover coal IRQ bit */
+ writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE);
+ if (count)
+ coal_enable = ALL_PORTS_COAL_DONE;
+ clks = count = 0; /* force clearing of regular regs below */
+ }
+
+ /*
+ * All chips: independent thresholds for each HC on the chip.
+ */
+ hc_mmio = mv_hc_base_from_port(mmio, 0);
+ writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD);
+ writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD);
+ writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE);
+ if (count)
+ coal_enable |= PORTS_0_3_COAL_DONE;
+ if (is_dual_hc) {
+ hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC);
+ writel(clks, hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD);
+ writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD);
+ writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE);
+ if (count)
+ coal_enable |= PORTS_4_7_COAL_DONE;
+ }
+
+ mv_set_main_irq_mask(host, 0, coal_enable);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+/**
+ * mv_start_edma - Enable eDMA engine
+ * @base: port base address
+ * @pp: port private data
+ *
+ * Verify the local cache of the eDMA state is accurate with a
+ * WARN_ON.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio,
+ struct mv_port_priv *pp, u8 protocol)
+{
+ int want_ncq = (protocol == ATA_PROT_NCQ);
+
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
+ if (want_ncq != using_ncq)
+ mv_stop_edma(ap);
+ }
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+ struct mv_host_priv *hpriv = ap->host->private_data;
+
+ mv_edma_cfg(ap, want_ncq, 1);
+
+ mv_set_edma_ptrs(port_mmio, hpriv, pp);
+ mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ);
+
+ writelfl(EDMA_EN, port_mmio + EDMA_CMD);
+ pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
+ }
+}
+
+static void mv_wait_for_edma_empty_idle(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ const u32 empty_idle = (EDMA_STATUS_CACHE_EMPTY | EDMA_STATUS_IDLE);
+ const int per_loop = 5, timeout = (15 * 1000 / per_loop);
+ int i;
+
+ /*
+ * Wait for the EDMA engine to finish transactions in progress.
+ * No idea what a good "timeout" value might be, but measurements
+ * indicate that it often requires hundreds of microseconds
+ * with two drives in-use. So we use the 15msec value above
+ * as a rough guess at what even more drives might require.
+ */
+ for (i = 0; i < timeout; ++i) {
+ u32 edma_stat = readl(port_mmio + EDMA_STATUS);
+ if ((edma_stat & empty_idle) == empty_idle)
+ break;
+ udelay(per_loop);
+ }
+ /* ata_port_info(ap, "%s: %u+ usecs\n", __func__, i); */
+}
+
+/**
+ * mv_stop_edma_engine - Disable eDMA engine
+ * @port_mmio: io base address
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_stop_edma_engine(void __iomem *port_mmio)
+{
+ int i;
+
+ /* Disable eDMA. The disable bit auto clears. */
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD);
+
+ /* Wait for the chip to confirm eDMA is off. */
+ for (i = 10000; i > 0; i--) {
+ u32 reg = readl(port_mmio + EDMA_CMD);
+ if (!(reg & EDMA_EN))
+ return 0;
+ udelay(10);
+ }
+ return -EIO;
+}
+
+static int mv_stop_edma(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ int err = 0;
+
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+ return 0;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ mv_wait_for_edma_empty_idle(ap);
+ if (mv_stop_edma_engine(port_mmio)) {
+ ata_port_err(ap, "Unable to stop eDMA\n");
+ err = -EIO;
+ }
+ mv_edma_cfg(ap, 0, 0);
+ return err;
+}
+
+#ifdef ATA_DEBUG
+static void mv_dump_mem(void __iomem *start, unsigned bytes)
+{
+ int b, w;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%p: ", start + b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ printk("%08x ", readl(start + b));
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
+}
+#endif
+
+static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
+{
+#ifdef ATA_DEBUG
+ int b, w;
+ u32 dw;
+ for (b = 0; b < bytes; ) {
+ DPRINTK("%02x: ", b);
+ for (w = 0; b < bytes && w < 4; w++) {
+ (void) pci_read_config_dword(pdev, b, &dw);
+ printk("%08x ", dw);
+ b += sizeof(u32);
+ }
+ printk("\n");
+ }
+#endif
+}
+static void mv_dump_all_regs(void __iomem *mmio_base, int port,
+ struct pci_dev *pdev)
+{
+#ifdef ATA_DEBUG
+ void __iomem *hc_base = mv_hc_base(mmio_base,
+ port >> MV_PORT_HC_SHIFT);
+ void __iomem *port_base;
+ int start_port, num_ports, p, start_hc, num_hcs, hc;
+
+ if (0 > port) {
+ start_hc = start_port = 0;
+ num_ports = 8; /* shld be benign for 4 port devs */
+ num_hcs = 2;
+ } else {
+ start_hc = port >> MV_PORT_HC_SHIFT;
+ start_port = port;
+ num_ports = num_hcs = 1;
+ }
+ DPRINTK("All registers for port(s) %u-%u:\n", start_port,
+ num_ports > 1 ? num_ports - 1 : start_port);
+
+ if (NULL != pdev) {
+ DPRINTK("PCI config space regs:\n");
+ mv_dump_pci_cfg(pdev, 0x68);
+ }
+ DPRINTK("PCI regs:\n");
+ mv_dump_mem(mmio_base+0xc00, 0x3c);
+ mv_dump_mem(mmio_base+0xd00, 0x34);
+ mv_dump_mem(mmio_base+0xf00, 0x4);
+ mv_dump_mem(mmio_base+0x1d00, 0x6c);
+ for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
+ hc_base = mv_hc_base(mmio_base, hc);
+ DPRINTK("HC regs (HC %i):\n", hc);
+ mv_dump_mem(hc_base, 0x1c);
+ }
+ for (p = start_port; p < start_port + num_ports; p++) {
+ port_base = mv_port_base(mmio_base, p);
+ DPRINTK("EDMA regs (port %i):\n", p);
+ mv_dump_mem(port_base, 0x54);
+ DPRINTK("SATA regs (port %i):\n", p);
+ mv_dump_mem(port_base+0x300, 0x60);
+ }
+#endif
+}
+
+static unsigned int mv_scr_offset(unsigned int sc_reg_in)
+{
+ unsigned int ofs;
+
+ switch (sc_reg_in) {
+ case SCR_STATUS:
+ case SCR_CONTROL:
+ case SCR_ERROR:
+ ofs = SATA_STATUS + (sc_reg_in * sizeof(u32));
+ break;
+ case SCR_ACTIVE:
+ ofs = SATA_ACTIVE; /* active is not with the others */
+ break;
+ default:
+ ofs = 0xffffffffU;
+ break;
+ }
+ return ofs;
+}
+
+static int mv_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val)
+{
+ unsigned int ofs = mv_scr_offset(sc_reg_in);
+
+ if (ofs != 0xffffffffU) {
+ *val = readl(mv_ap_base(link->ap) + ofs);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
+{
+ unsigned int ofs = mv_scr_offset(sc_reg_in);
+
+ if (ofs != 0xffffffffU) {
+ void __iomem *addr = mv_ap_base(link->ap) + ofs;
+ if (sc_reg_in == SCR_CONTROL) {
+ /*
+ * Workaround for 88SX60x1 FEr SATA#26:
+ *
+ * COMRESETs have to take care not to accidentally
+ * put the drive to sleep when writing SCR_CONTROL.
+ * Setting bits 12..15 prevents this problem.
+ *
+ * So if we see an outbound COMMRESET, set those bits.
+ * Ditto for the followup write that clears the reset.
+ *
+ * The proprietary driver does this for
+ * all chip versions, and so do we.
+ */
+ if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
+ val |= 0xf000;
+ }
+ writelfl(val, addr);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static void mv6_dev_config(struct ata_device *adev)
+{
+ /*
+ * Deal with Gen-II ("mv6") hardware quirks/restrictions:
+ *
+ * Gen-II does not support NCQ over a port multiplier
+ * (no FIS-based switching).
+ */
+ if (adev->flags & ATA_DFLAG_NCQ) {
+ if (sata_pmp_attached(adev->link->ap)) {
+ adev->flags &= ~ATA_DFLAG_NCQ;
+ ata_dev_info(adev,
+ "NCQ disabled for command-based switching\n");
+ }
+ }
+}
+
+static int mv_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_link *link = qc->dev->link;
+ struct ata_port *ap = link->ap;
+ struct mv_port_priv *pp = ap->private_data;
+
+ /*
+ * Don't allow new commands if we're in a delayed EH state
+ * for NCQ and/or FIS-based switching.
+ */
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
+ return ATA_DEFER_PORT;
+
+ /* PIO commands need exclusive link: no other commands [DMA or PIO]
+ * can run concurrently.
+ * set excl_link when we want to send a PIO command in DMA mode
+ * or a non-NCQ command in NCQ mode.
+ * When we receive a command from that link, and there are no
+ * outstanding commands, mark a flag to clear excl_link and let
+ * the command go through.
+ */
+ if (unlikely(ap->excl_link)) {
+ if (link == ap->excl_link) {
+ if (ap->nr_active_links)
+ return ATA_DEFER_PORT;
+ qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
+ return 0;
+ } else
+ return ATA_DEFER_PORT;
+ }
+
+ /*
+ * If the port is completely idle, then allow the new qc.
+ */
+ if (ap->nr_active_links == 0)
+ return 0;
+
+ /*
+ * The port is operating in host queuing mode (EDMA) with NCQ
+ * enabled, allow multiple NCQ commands. EDMA also allows
+ * queueing multiple DMA commands but libata core currently
+ * doesn't allow it.
+ */
+ if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+ (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) {
+ if (ata_is_ncq(qc->tf.protocol))
+ return 0;
+ else {
+ ap->excl_link = link;
+ return ATA_DEFER_PORT;
+ }
+ }
+
+ return ATA_DEFER_PORT;
+}
+
+static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio;
+
+ u32 fiscfg, *old_fiscfg = &pp->cached.fiscfg;
+ u32 ltmode, *old_ltmode = &pp->cached.ltmode;
+ u32 haltcond, *old_haltcond = &pp->cached.haltcond;
+
+ ltmode = *old_ltmode & ~LTMODE_BIT8;
+ haltcond = *old_haltcond | EDMA_ERR_DEV;
+
+ if (want_fbs) {
+ fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC;
+ ltmode = *old_ltmode | LTMODE_BIT8;
+ if (want_ncq)
+ haltcond &= ~EDMA_ERR_DEV;
+ else
+ fiscfg |= FISCFG_WAIT_DEV_ERR;
+ } else {
+ fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
+ }
+
+ port_mmio = mv_ap_base(ap);
+ mv_write_cached_reg(port_mmio + FISCFG, old_fiscfg, fiscfg);
+ mv_write_cached_reg(port_mmio + LTMODE, old_ltmode, ltmode);
+ mv_write_cached_reg(port_mmio + EDMA_HALTCOND, old_haltcond, haltcond);
+}
+
+static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ u32 old, new;
+
+ /* workaround for 88SX60x1 FEr SATA#25 (part 1) */
+ old = readl(hpriv->base + GPIO_PORT_CTL);
+ if (want_ncq)
+ new = old | (1 << 22);
+ else
+ new = old & ~(1 << 22);
+ if (new != old)
+ writel(new, hpriv->base + GPIO_PORT_CTL);
+}
+
+/**
+ * mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma
+ * @ap: Port being initialized
+ *
+ * There are two DMA modes on these chips: basic DMA, and EDMA.
+ *
+ * Bit-0 of the "EDMA RESERVED" register enables/disables use
+ * of basic DMA on the GEN_IIE versions of the chips.
+ *
+ * This bit survives EDMA resets, and must be set for basic DMA
+ * to function, and should be cleared when EDMA is active.
+ */
+static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ u32 new, *old = &pp->cached.unknown_rsvd;
+
+ if (enable_bmdma)
+ new = *old | 1;
+ else
+ new = *old & ~1;
+ mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD, old, new);
+}
+
+/*
+ * SOC chips have an issue whereby the HDD LEDs don't always blink
+ * during I/O when NCQ is enabled. Enabling a special "LED blink" mode
+ * of the SOC takes care of it, generating a steady blink rate when
+ * any drive on the chip is active.
+ *
+ * Unfortunately, the blink mode is a global hardware setting for the SOC,
+ * so we must use it whenever at least one port on the SOC has NCQ enabled.
+ *
+ * We turn "LED blink" off when NCQ is not in use anywhere, because the normal
+ * LED operation works then, and provides better (more accurate) feedback.
+ *
+ * Note that this code assumes that an SOC never has more than one HC onboard.
+ */
+static void mv_soc_led_blink_enable(struct ata_port *ap)
+{
+ struct ata_host *host = ap->host;
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *hc_mmio;
+ u32 led_ctrl;
+
+ if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)
+ return;
+ hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN;
+ hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no);
+ led_ctrl = readl(hc_mmio + SOC_LED_CTRL);
+ writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL);
+}
+
+static void mv_soc_led_blink_disable(struct ata_port *ap)
+{
+ struct ata_host *host = ap->host;
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *hc_mmio;
+ u32 led_ctrl;
+ unsigned int port;
+
+ if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN))
+ return;
+
+ /* disable led-blink only if no ports are using NCQ */
+ for (port = 0; port < hpriv->n_ports; port++) {
+ struct ata_port *this_ap = host->ports[port];
+ struct mv_port_priv *pp = this_ap->private_data;
+
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
+ return;
+ }
+
+ hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN;
+ hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no);
+ led_ctrl = readl(hc_mmio + SOC_LED_CTRL);
+ writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL);
+}
+
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma)
+{
+ u32 cfg;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = mv_ap_base(ap);
+
+ /* set up non-NCQ EDMA configuration */
+ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
+ pp->pp_flags &=
+ ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY);
+
+ if (IS_GEN_I(hpriv))
+ cfg |= (1 << 8); /* enab config burst size mask */
+
+ else if (IS_GEN_II(hpriv)) {
+ cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+ mv_60x1_errata_sata25(ap, want_ncq);
+
+ } else if (IS_GEN_IIE(hpriv)) {
+ int want_fbs = sata_pmp_attached(ap);
+ /*
+ * Possible future enhancement:
+ *
+ * The chip can use FBS with non-NCQ, if we allow it,
+ * But first we need to have the error handling in place
+ * for this mode (datasheet section 7.3.15.4.2.3).
+ * So disallow non-NCQ FBS for now.
+ */
+ want_fbs &= want_ncq;
+
+ mv_config_fbs(ap, want_ncq, want_fbs);
+
+ if (want_fbs) {
+ pp->pp_flags |= MV_PP_FLAG_FBS_EN;
+ cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
+ }
+
+ cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
+ if (want_edma) {
+ cfg |= (1 << 22); /* enab 4-entry host queue cache */
+ if (!IS_SOC(hpriv))
+ cfg |= (1 << 18); /* enab early completion */
+ }
+ if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
+ cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
+ mv_bmdma_enable_iie(ap, !want_edma);
+
+ if (IS_SOC(hpriv)) {
+ if (want_ncq)
+ mv_soc_led_blink_enable(ap);
+ else
+ mv_soc_led_blink_disable(ap);
+ }
+ }
+
+ if (want_ncq) {
+ cfg |= EDMA_CFG_NCQ;
+ pp->pp_flags |= MV_PP_FLAG_NCQ_EN;
+ }
+
+ writelfl(cfg, port_mmio + EDMA_CFG);
+}
+
+static void mv_port_free_dma_mem(struct ata_port *ap)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ int tag;
+
+ if (pp->crqb) {
+ dma_pool_free(hpriv->crqb_pool, pp->crqb, pp->crqb_dma);
+ pp->crqb = NULL;
+ }
+ if (pp->crpb) {
+ dma_pool_free(hpriv->crpb_pool, pp->crpb, pp->crpb_dma);
+ pp->crpb = NULL;
+ }
+ /*
+ * For GEN_I, there's no NCQ, so we have only a single sg_tbl.
+ * For later hardware, we have one unique sg_tbl per NCQ tag.
+ */
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (pp->sg_tbl[tag]) {
+ if (tag == 0 || !IS_GEN_I(hpriv))
+ dma_pool_free(hpriv->sg_tbl_pool,
+ pp->sg_tbl[tag],
+ pp->sg_tbl_dma[tag]);
+ pp->sg_tbl[tag] = NULL;
+ }
+ }
+}
+
+/**
+ * mv_port_start - Port specific init/start routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Allocate and point to DMA memory, init port private memory,
+ * zero indices.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp;
+ unsigned long flags;
+ int tag;
+
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+ ap->private_data = pp;
+
+ pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
+ if (!pp->crqb)
+ return -ENOMEM;
+ memset(pp->crqb, 0, MV_CRQB_Q_SZ);
+
+ pp->crpb = dma_pool_alloc(hpriv->crpb_pool, GFP_KERNEL, &pp->crpb_dma);
+ if (!pp->crpb)
+ goto out_port_free_dma_mem;
+ memset(pp->crpb, 0, MV_CRPB_Q_SZ);
+
+ /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
+ if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
+ ap->flags |= ATA_FLAG_AN;
+ /*
+ * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
+ * For later hardware, we need one unique sg_tbl per NCQ tag.
+ */
+ for (tag = 0; tag < MV_MAX_Q_DEPTH; ++tag) {
+ if (tag == 0 || !IS_GEN_I(hpriv)) {
+ pp->sg_tbl[tag] = dma_pool_alloc(hpriv->sg_tbl_pool,
+ GFP_KERNEL, &pp->sg_tbl_dma[tag]);
+ if (!pp->sg_tbl[tag])
+ goto out_port_free_dma_mem;
+ } else {
+ pp->sg_tbl[tag] = pp->sg_tbl[0];
+ pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
+ }
+ }
+
+ spin_lock_irqsave(ap->lock, flags);
+ mv_save_cached_regs(ap);
+ mv_edma_cfg(ap, 0, 0);
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return 0;
+
+out_port_free_dma_mem:
+ mv_port_free_dma_mem(ap);
+ return -ENOMEM;
+}
+
+/**
+ * mv_port_stop - Port specific cleanup/stop routine.
+ * @ap: ATA channel to manipulate
+ *
+ * Stop DMA, cleanup port memory.
+ *
+ * LOCKING:
+ * This routine uses the host lock to protect the DMA stop.
+ */
+static void mv_port_stop(struct ata_port *ap)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(ap->lock, flags);
+ mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, 0);
+ spin_unlock_irqrestore(ap->lock, flags);
+ mv_port_free_dma_mem(ap);
+}
+
+/**
+ * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries
+ * @qc: queued command whose SG list to source from
+ *
+ * Populate the SG list and mark the last entry.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct mv_port_priv *pp = qc->ap->private_data;
+ struct scatterlist *sg;
+ struct mv_sg *mv_sg, *last_sg = NULL;
+ unsigned int si;
+
+ mv_sg = pp->sg_tbl[qc->tag];
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ dma_addr_t addr = sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ u32 offset = addr & 0xffff;
+ u32 len = sg_len;
+
+ if (offset + len > 0x10000)
+ len = 0x10000 - offset;
+
+ mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
+ mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ mv_sg->flags_size = cpu_to_le32(len & 0xffff);
+ mv_sg->reserved = 0;
+
+ sg_len -= len;
+ addr += len;
+
+ last_sg = mv_sg;
+ mv_sg++;
+ }
+ }
+
+ if (likely(last_sg))
+ last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+ mb(); /* ensure data structure is visible to the chipset */
+}
+
+static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
+{
+ u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+ (last ? CRQB_CMD_LAST : 0);
+ *cmdw = cpu_to_le16(tmp);
+}
+
+/**
+ * mv_sff_irq_clear - Clear hardware interrupt after DMA.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * We need this only for ATAPI bmdma transactions,
+ * as otherwise we experience spurious interrupts
+ * after libata-sff handles the bmdma interrupts.
+ */
+static void mv_sff_irq_clear(struct ata_port *ap)
+{
+ mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ);
+}
+
+/**
+ * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA.
+ * @qc: queued command to check for chipset/DMA compatibility.
+ *
+ * The bmdma engines cannot handle speculative data sizes
+ * (bytecount under/over flow). So only allow DMA for
+ * data transfer commands with known data sizes.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+
+ if (scmd) {
+ switch (scmd->cmnd[0]) {
+ case READ_6:
+ case READ_10:
+ case READ_12:
+ case WRITE_6:
+ case WRITE_10:
+ case WRITE_12:
+ case GPCMD_READ_CD:
+ case GPCMD_SEND_DVD_STRUCTURE:
+ case GPCMD_SEND_CUE_SHEET:
+ return 0; /* DMA is safe */
+ }
+ }
+ return -EOPNOTSUPP; /* use PIO instead */
+}
+
+/**
+ * mv_bmdma_setup - Set up BMDMA transaction
+ * @qc: queued command to prepare DMA for.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+
+ mv_fill_sg(qc);
+
+ /* clear all DMA cmd bits */
+ writel(0, port_mmio + BMDMA_CMD);
+
+ /* load PRD table addr. */
+ writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16,
+ port_mmio + BMDMA_PRD_HIGH);
+ writelfl(pp->sg_tbl_dma[qc->tag],
+ port_mmio + BMDMA_PRD_LOW);
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+/**
+ * mv_bmdma_start - Start a BMDMA transaction
+ * @qc: queued command to start DMA on.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START;
+
+ /* start host DMA transaction */
+ writelfl(cmd, port_mmio + BMDMA_CMD);
+}
+
+/**
+ * mv_bmdma_stop - Stop BMDMA transfer
+ * @qc: queued command to stop DMA on.
+ *
+ * Clears the ATA_DMA_START flag in the bmdma control register
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_bmdma_stop_ap(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 cmd;
+
+ /* clear start/stop bit */
+ cmd = readl(port_mmio + BMDMA_CMD);
+ if (cmd & ATA_DMA_START) {
+ cmd &= ~ATA_DMA_START;
+ writelfl(cmd, port_mmio + BMDMA_CMD);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_sff_dma_pause(ap);
+ }
+}
+
+static void mv_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ mv_bmdma_stop_ap(qc->ap);
+}
+
+/**
+ * mv_bmdma_status - Read BMDMA status
+ * @ap: port for which to retrieve DMA status.
+ *
+ * Read and return equivalent of the sff BMDMA status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 mv_bmdma_status(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 reg, status;
+
+ /*
+ * Other bits are valid only if ATA_DMA_ACTIVE==0,
+ * and the ATA_DMA_INTR bit doesn't exist.
+ */
+ reg = readl(port_mmio + BMDMA_STATUS);
+ if (reg & ATA_DMA_ACTIVE)
+ status = ATA_DMA_ACTIVE;
+ else if (reg & ATA_DMA_ERR)
+ status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR;
+ else {
+ /*
+ * Just because DMA_ACTIVE is 0 (DMA completed),
+ * this does _not_ mean the device is "done".
+ * So we should not yet be signalling ATA_DMA_INTR
+ * in some cases. Eg. DSM/TRIM, and perhaps others.
+ */
+ mv_bmdma_stop_ap(ap);
+ if (ioread8(ap->ioaddr.altstatus_addr) & ATA_BUSY)
+ status = 0;
+ else
+ status = ATA_DMA_INTR;
+ }
+ return status;
+}
+
+static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ /*
+ * Workaround for 88SX60x1 FEr SATA#24.
+ *
+ * Chip may corrupt WRITEs if multi_count >= 4kB.
+ * Note that READs are unaffected.
+ *
+ * It's not clear if this errata really means "4K bytes",
+ * or if it always happens for multi_count > 7
+ * regardless of device sector_size.
+ *
+ * So, for safety, any write with multi_count > 7
+ * gets converted here into a regular PIO write instead:
+ */
+ if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) {
+ if (qc->dev->multi_count > 7) {
+ switch (tf->command) {
+ case ATA_CMD_WRITE_MULTI:
+ tf->command = ATA_CMD_PIO_WRITE;
+ break;
+ case ATA_CMD_WRITE_MULTI_FUA_EXT:
+ tf->flags &= ~ATA_TFLAG_FUA; /* ugh */
+ /* fall through */
+ case ATA_CMD_WRITE_MULTI_EXT:
+ tf->command = ATA_CMD_PIO_WRITE_EXT;
+ break;
+ }
+ }
+ }
+}
+
+/**
+ * mv_qc_prep - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ __le16 *cw;
+ struct ata_taskfile *tf = &qc->tf;
+ u16 flags = 0;
+ unsigned in_index;
+
+ switch (tf->protocol) {
+ case ATA_PROT_DMA:
+ if (tf->command == ATA_CMD_DSM)
+ return;
+ /* fall-thru */
+ case ATA_PROT_NCQ:
+ break; /* continue below */
+ case ATA_PROT_PIO:
+ mv_rw_multi_errata_sata24(qc);
+ return;
+ default:
+ return;
+ }
+
+ /* Fill in command request block
+ */
+ if (!(tf->flags & ATA_TFLAG_WRITE))
+ flags |= CRQB_FLAG_READ;
+ WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
+
+ /* get current queue index from software */
+ in_index = pp->req_idx;
+
+ pp->crqb[in_index].sg_addr =
+ cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
+ pp->crqb[in_index].sg_addr_hi =
+ cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
+ pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
+
+ cw = &pp->crqb[in_index].ata_cmd[0];
+
+ /* Sadly, the CRQB cannot accommodate all registers--there are
+ * only 11 bytes...so we must pick and choose required
+ * registers based on the command. So, we drop feature and
+ * hob_feature for [RW] DMA commands, but they are needed for
+ * NCQ. NCQ will drop hob_nsect, which is not needed there
+ * (nsect is used only for the tag; feat/hob_feat hold true nsect).
+ */
+ switch (tf->command) {
+ case ATA_CMD_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ case ATA_CMD_WRITE_FUA_EXT:
+ mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
+ break;
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_FPDMA_WRITE:
+ mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0);
+ mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0);
+ break;
+ default:
+ /* The only other commands EDMA supports in non-queued and
+ * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
+ * of which are defined/used by Linux. If we get here, this
+ * driver needs work.
+ *
+ * FIXME: modify libata to give qc_prep a return value and
+ * return error here.
+ */
+ BUG_ON(tf->command);
+ break;
+ }
+ mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0);
+ mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0);
+ mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
+ mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_qc_prep_iie - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_crqb_iie *crqb;
+ struct ata_taskfile *tf = &qc->tf;
+ unsigned in_index;
+ u32 flags = 0;
+
+ if ((tf->protocol != ATA_PROT_DMA) &&
+ (tf->protocol != ATA_PROT_NCQ))
+ return;
+ if (tf->command == ATA_CMD_DSM)
+ return; /* use bmdma for this */
+
+ /* Fill in Gen IIE command request block */
+ if (!(tf->flags & ATA_TFLAG_WRITE))
+ flags |= CRQB_FLAG_READ;
+
+ WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= qc->tag << CRQB_HOSTQ_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
+
+ /* get current queue index from software */
+ in_index = pp->req_idx;
+
+ crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
+ crqb->addr = cpu_to_le32(pp->sg_tbl_dma[qc->tag] & 0xffffffff);
+ crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
+ crqb->flags = cpu_to_le32(flags);
+
+ crqb->ata_cmd[0] = cpu_to_le32(
+ (tf->command << 16) |
+ (tf->feature << 24)
+ );
+ crqb->ata_cmd[1] = cpu_to_le32(
+ (tf->lbal << 0) |
+ (tf->lbam << 8) |
+ (tf->lbah << 16) |
+ (tf->device << 24)
+ );
+ crqb->ata_cmd[2] = cpu_to_le32(
+ (tf->hob_lbal << 0) |
+ (tf->hob_lbam << 8) |
+ (tf->hob_lbah << 16) |
+ (tf->hob_feature << 24)
+ );
+ crqb->ata_cmd[3] = cpu_to_le32(
+ (tf->nsect << 0) |
+ (tf->hob_nsect << 8)
+ );
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_sff_check_status - fetch device status, if valid
+ * @ap: ATA port to fetch status from
+ *
+ * When using command issue via mv_qc_issue_fis(),
+ * the initial ATA_BUSY state does not show up in the
+ * ATA status (shadow) register. This can confuse libata!
+ *
+ * So we have a hook here to fake ATA_BUSY for that situation,
+ * until the first time a BUSY, DRQ, or ERR bit is seen.
+ *
+ * The rest of the time, it simply returns the ATA status register.
+ */
+static u8 mv_sff_check_status(struct ata_port *ap)
+{
+ u8 stat = ioread8(ap->ioaddr.status_addr);
+ struct mv_port_priv *pp = ap->private_data;
+
+ if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) {
+ if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR))
+ pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY;
+ else
+ stat = ATA_BUSY;
+ }
+ return stat;
+}
+
+/**
+ * mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register
+ * @fis: fis to be sent
+ * @nwords: number of 32-bit words in the fis
+ */
+static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 ifctl, old_ifctl, ifstat;
+ int i, timeout = 200, final_word = nwords - 1;
+
+ /* Initiate FIS transmission mode */
+ old_ifctl = readl(port_mmio + SATA_IFCTL);
+ ifctl = 0x100 | (old_ifctl & 0xf);
+ writelfl(ifctl, port_mmio + SATA_IFCTL);
+
+ /* Send all words of the FIS except for the final word */
+ for (i = 0; i < final_word; ++i)
+ writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS);
+
+ /* Flag end-of-transmission, and then send the final word */
+ writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL);
+ writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS);
+
+ /*
+ * Wait for FIS transmission to complete.
+ * This typically takes just a single iteration.
+ */
+ do {
+ ifstat = readl(port_mmio + SATA_IFSTAT);
+ } while (!(ifstat & 0x1000) && --timeout);
+
+ /* Restore original port configuration */
+ writelfl(old_ifctl, port_mmio + SATA_IFCTL);
+
+ /* See if it worked */
+ if ((ifstat & 0x3000) != 0x1000) {
+ ata_port_warn(ap, "%s transmission error, ifstat=%08x\n",
+ __func__, ifstat);
+ return AC_ERR_OTHER;
+ }
+ return 0;
+}
+
+/**
+ * mv_qc_issue_fis - Issue a command directly as a FIS
+ * @qc: queued command to start
+ *
+ * Note that the ATA shadow registers are not updated
+ * after command issue, so the device will appear "READY"
+ * if polled, even while it is BUSY processing the command.
+ *
+ * So we use a status hook to fake ATA_BUSY until the drive changes state.
+ *
+ * Note: we don't get updated shadow regs on *completion*
+ * of non-data commands. So avoid sending them via this function,
+ * as they will appear to have completed immediately.
+ *
+ * GEN_IIE has special registers that we could get the result tf from,
+ * but earlier chipsets do not. For now, we ignore those registers.
+ */
+static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ struct ata_link *link = qc->dev->link;
+ u32 fis[5];
+ int err = 0;
+
+ ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis);
+ err = mv_send_fis(ap, fis, ARRAY_SIZE(fis));
+ if (err)
+ return err;
+
+ switch (qc->tf.protocol) {
+ case ATAPI_PROT_PIO:
+ pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY;
+ /* fall through */
+ case ATAPI_PROT_NODATA:
+ ap->hsm_task_state = HSM_ST_FIRST;
+ break;
+ case ATA_PROT_PIO:
+ pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY;
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ ap->hsm_task_state = HSM_ST_FIRST;
+ else
+ ap->hsm_task_state = HSM_ST;
+ break;
+ default:
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+ }
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_sff_queue_pio_task(link, 0);
+ return 0;
+}
+
+/**
+ * mv_qc_issue - Initiate a command to the host
+ * @qc: queued command to start
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it sanity checks our local
+ * caches of the request producer/consumer indices then enables
+ * DMA and bumps the request producer index.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
+{
+ static int limit_warnings = 10;
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ u32 in_index;
+ unsigned int port_irqs;
+
+ pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ if (qc->tf.command == ATA_CMD_DSM) {
+ if (!ap->ops->bmdma_setup) /* no bmdma on GEN_I */
+ return AC_ERR_OTHER;
+ break; /* use bmdma for this */
+ }
+ /* fall thru */
+ case ATA_PROT_NCQ:
+ mv_start_edma(ap, port_mmio, pp, qc->tf.protocol);
+ pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
+ in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
+
+ /* Write the request in pointer to kick the EDMA to life */
+ writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
+ port_mmio + EDMA_REQ_Q_IN_PTR);
+ return 0;
+
+ case ATA_PROT_PIO:
+ /*
+ * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
+ *
+ * Someday, we might implement special polling workarounds
+ * for these, but it all seems rather unnecessary since we
+ * normally use only DMA for commands which transfer more
+ * than a single block of data.
+ *
+ * Much of the time, this could just work regardless.
+ * So for now, just log the incident, and allow the attempt.
+ */
+ if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
+ --limit_warnings;
+ ata_link_warn(qc->dev->link, DRV_NAME
+ ": attempting PIO w/multiple DRQ: "
+ "this may fail due to h/w errata\n");
+ }
+ /* drop through */
+ case ATA_PROT_NODATA:
+ case ATAPI_PROT_PIO:
+ case ATAPI_PROT_NODATA:
+ if (ap->flags & ATA_FLAG_PIO_POLLING)
+ qc->tf.flags |= ATA_TFLAG_POLLING;
+ break;
+ }
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ port_irqs = ERR_IRQ; /* mask device interrupt when polling */
+ else
+ port_irqs = ERR_IRQ | DONE_IRQ; /* unmask all interrupts */
+
+ /*
+ * We're about to send a non-EDMA capable command to the
+ * port. Turn off EDMA so there won't be problems accessing
+ * shadow block, etc registers.
+ */
+ mv_stop_edma(ap);
+ mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs);
+ mv_pmp_select(ap, qc->dev->link->pmp);
+
+ if (qc->tf.command == ATA_CMD_READ_LOG_EXT) {
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ /*
+ * Workaround for 88SX60x1 FEr SATA#25 (part 2).
+ *
+ * After any NCQ error, the READ_LOG_EXT command
+ * from libata-eh *must* use mv_qc_issue_fis().
+ * Otherwise it might fail, due to chip errata.
+ *
+ * Rather than special-case it, we'll just *always*
+ * use this method here for READ_LOG_EXT, making for
+ * easier testing.
+ */
+ if (IS_GEN_II(hpriv))
+ return mv_qc_issue_fis(qc);
+ }
+ return ata_bmdma_qc_issue(qc);
+}
+
+static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ struct ata_queued_cmd *qc;
+
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
+ return NULL;
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING))
+ return qc;
+ return NULL;
+}
+
+static void mv_pmp_error_handler(struct ata_port *ap)
+{
+ unsigned int pmp, pmp_map;
+ struct mv_port_priv *pp = ap->private_data;
+
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) {
+ /*
+ * Perform NCQ error analysis on failed PMPs
+ * before we freeze the port entirely.
+ *
+ * The failed PMPs are marked earlier by mv_pmp_eh_prep().
+ */
+ pmp_map = pp->delayed_eh_pmp_map;
+ pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH;
+ for (pmp = 0; pmp_map != 0; pmp++) {
+ unsigned int this_pmp = (1 << pmp);
+ if (pmp_map & this_pmp) {
+ struct ata_link *link = &ap->pmp_link[pmp];
+ pmp_map &= ~this_pmp;
+ ata_eh_analyze_ncq_error(link);
+ }
+ }
+ ata_port_freeze(ap);
+ }
+ sata_pmp_error_handler(ap);
+}
+
+static unsigned int mv_get_err_pmp_map(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+
+ return readl(port_mmio + SATA_TESTCTL) >> 16;
+}
+
+static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map)
+{
+ struct ata_eh_info *ehi;
+ unsigned int pmp;
+
+ /*
+ * Initialize EH info for PMPs which saw device errors
+ */
+ ehi = &ap->link.eh_info;
+ for (pmp = 0; pmp_map != 0; pmp++) {
+ unsigned int this_pmp = (1 << pmp);
+ if (pmp_map & this_pmp) {
+ struct ata_link *link = &ap->pmp_link[pmp];
+
+ pmp_map &= ~this_pmp;
+ ehi = &link->eh_info;
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "dev err");
+ ehi->err_mask |= AC_ERR_DEV;
+ ehi->action |= ATA_EH_RESET;
+ ata_link_abort(link);
+ }
+ }
+}
+
+static int mv_req_q_empty(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 in_ptr, out_ptr;
+
+ in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ return (in_ptr == out_ptr); /* 1 == queue_is_empty */
+}
+
+static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
+{
+ struct mv_port_priv *pp = ap->private_data;
+ int failed_links;
+ unsigned int old_map, new_map;
+
+ /*
+ * Device error during FBS+NCQ operation:
+ *
+ * Set a port flag to prevent further I/O being enqueued.
+ * Leave the EDMA running to drain outstanding commands from this port.
+ * Perform the post-mortem/EH only when all responses are complete.
+ * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.2).
+ */
+ if (!(pp->pp_flags & MV_PP_FLAG_DELAYED_EH)) {
+ pp->pp_flags |= MV_PP_FLAG_DELAYED_EH;
+ pp->delayed_eh_pmp_map = 0;
+ }
+ old_map = pp->delayed_eh_pmp_map;
+ new_map = old_map | mv_get_err_pmp_map(ap);
+
+ if (old_map != new_map) {
+ pp->delayed_eh_pmp_map = new_map;
+ mv_pmp_eh_prep(ap, new_map & ~old_map);
+ }
+ failed_links = hweight16(new_map);
+
+ ata_port_info(ap,
+ "%s: pmp_map=%04x qc_map=%04x failed_links=%d nr_active_links=%d\n",
+ __func__, pp->delayed_eh_pmp_map,
+ ap->qc_active, failed_links,
+ ap->nr_active_links);
+
+ if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) {
+ mv_process_crpb_entries(ap, pp);
+ mv_stop_edma(ap);
+ mv_eh_freeze(ap);
+ ata_port_info(ap, "%s: done\n", __func__);
+ return 1; /* handled */
+ }
+ ata_port_info(ap, "%s: waiting\n", __func__);
+ return 1; /* handled */
+}
+
+static int mv_handle_fbs_non_ncq_dev_err(struct ata_port *ap)
+{
+ /*
+ * Possible future enhancement:
+ *
+ * FBS+non-NCQ operation is not yet implemented.
+ * See related notes in mv_edma_cfg().
+ *
+ * Device error during FBS+non-NCQ operation:
+ *
+ * We need to snapshot the shadow registers for each failed command.
+ * Follow recovery sequence from 6042/7042 datasheet (7.3.15.4.2.3).
+ */
+ return 0; /* not handled */
+}
+
+static int mv_handle_dev_err(struct ata_port *ap, u32 edma_err_cause)
+{
+ struct mv_port_priv *pp = ap->private_data;
+
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+ return 0; /* EDMA was not active: not handled */
+ if (!(pp->pp_flags & MV_PP_FLAG_FBS_EN))
+ return 0; /* FBS was not active: not handled */
+
+ if (!(edma_err_cause & EDMA_ERR_DEV))
+ return 0; /* non DEV error: not handled */
+ edma_err_cause &= ~EDMA_ERR_IRQ_TRANSIENT;
+ if (edma_err_cause & ~(EDMA_ERR_DEV | EDMA_ERR_SELF_DIS))
+ return 0; /* other problems: not handled */
+
+ if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
+ /*
+ * EDMA should NOT have self-disabled for this case.
+ * If it did, then something is wrong elsewhere,
+ * and we cannot handle it here.
+ */
+ if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+ ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ return 0; /* not handled */
+ }
+ return mv_handle_fbs_ncq_dev_err(ap);
+ } else {
+ /*
+ * EDMA should have self-disabled for this case.
+ * If it did not, then something is wrong elsewhere,
+ * and we cannot handle it here.
+ */
+ if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) {
+ ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ return 0; /* not handled */
+ }
+ return mv_handle_fbs_non_ncq_dev_err(ap);
+ }
+ return 0; /* not handled */
+}
+
+static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ char *when = "idle";
+
+ ata_ehi_clear_desc(ehi);
+ if (edma_was_enabled) {
+ when = "EDMA enabled";
+ } else {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+ when = "polling";
+ }
+ ata_ehi_push_desc(ehi, "unexpected device interrupt while %s", when);
+ ehi->err_mask |= AC_ERR_OTHER;
+ ehi->action |= ATA_EH_RESET;
+ ata_port_freeze(ap);
+}
+
+/**
+ * mv_err_intr - Handle error interrupts on the port
+ * @ap: ATA channel to manipulate
+ *
+ * Most cases require a full reset of the chip's state machine,
+ * which also performs a COMRESET.
+ * Also, if the port disabled DMA, update our cached copy to match.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_err_intr(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 edma_err_cause, eh_freeze_mask, serr = 0;
+ u32 fis_cause = 0;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ unsigned int action = 0, err_mask = 0;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ata_queued_cmd *qc;
+ int abort = 0;
+
+ /*
+ * Read and clear the SError and err_cause bits.
+ * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear
+ * the FIS_IRQ_CAUSE register before clearing edma_err_cause.
+ */
+ sata_scr_read(&ap->link, SCR_ERROR, &serr);
+ sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
+
+ edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE);
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ fis_cause = readl(port_mmio + FIS_IRQ_CAUSE);
+ writelfl(~fis_cause, port_mmio + FIS_IRQ_CAUSE);
+ }
+ writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE);
+
+ if (edma_err_cause & EDMA_ERR_DEV) {
+ /*
+ * Device errors during FIS-based switching operation
+ * require special handling.
+ */
+ if (mv_handle_dev_err(ap, edma_err_cause))
+ return;
+ }
+
+ qc = mv_get_active_qc(ap);
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
+ edma_err_cause, pp->pp_flags);
+
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause);
+ if (fis_cause & FIS_IRQ_CAUSE_AN) {
+ u32 ec = edma_err_cause &
+ ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT);
+ sata_async_notification(ap);
+ if (!ec)
+ return; /* Just an AN; no need for the nukes */
+ ata_ehi_push_desc(ehi, "SDB notify");
+ }
+ }
+ /*
+ * All generations share these EDMA error cause bits:
+ */
+ if (edma_err_cause & EDMA_ERR_DEV) {
+ err_mask |= AC_ERR_DEV;
+ action |= ATA_EH_RESET;
+ ata_ehi_push_desc(ehi, "dev error");
+ }
+ if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
+ EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR)) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_RESET;
+ ata_ehi_push_desc(ehi, "parity error");
+ }
+ if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
+ "dev disconnect" : "dev connect");
+ action |= ATA_EH_RESET;
+ }
+
+ /*
+ * Gen-I has a different SELF_DIS bit,
+ * different FREEZE bits, and no SERR bit:
+ */
+ if (IS_GEN_I(hpriv)) {
+ eh_freeze_mask = EDMA_EH_FREEZE_5;
+ if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ ata_ehi_push_desc(ehi, "EDMA self-disable");
+ }
+ } else {
+ eh_freeze_mask = EDMA_EH_FREEZE;
+ if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ ata_ehi_push_desc(ehi, "EDMA self-disable");
+ }
+ if (edma_err_cause & EDMA_ERR_SERR) {
+ ata_ehi_push_desc(ehi, "SError=%08x", serr);
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_RESET;
+ }
+ }
+
+ if (!err_mask) {
+ err_mask = AC_ERR_OTHER;
+ action |= ATA_EH_RESET;
+ }
+
+ ehi->serror |= serr;
+ ehi->action |= action;
+
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ if (err_mask == AC_ERR_DEV) {
+ /*
+ * Cannot do ata_port_freeze() here,
+ * because it would kill PIO access,
+ * which is needed for further diagnosis.
+ */
+ mv_eh_freeze(ap);
+ abort = 1;
+ } else if (edma_err_cause & eh_freeze_mask) {
+ /*
+ * Note to self: ata_port_freeze() calls ata_port_abort()
+ */
+ ata_port_freeze(ap);
+ } else {
+ abort = 1;
+ }
+
+ if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
+}
+
+static bool mv_process_crpb_response(struct ata_port *ap,
+ struct mv_crpb *response, unsigned int tag, int ncq_enabled)
+{
+ u8 ata_status;
+ u16 edma_status = le16_to_cpu(response->flags);
+
+ /*
+ * edma_status from a response queue entry:
+ * LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only).
+ * MSB is saved ATA status from command completion.
+ */
+ if (!ncq_enabled) {
+ u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
+ if (err_cause) {
+ /*
+ * Error will be seen/handled by
+ * mv_err_intr(). So do nothing at all here.
+ */
+ return false;
+ }
+ }
+ ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
+ if (!ac_err_mask(ata_status))
+ return true;
+ /* else: leave it for mv_err_intr() */
+ return false;
+}
+
+static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ u32 in_index;
+ bool work_done = false;
+ u32 done_mask = 0;
+ int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN);
+
+ /* Get the hardware queue position index */
+ in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR)
+ >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+ /* Process new responses from since the last time we looked */
+ while (in_index != pp->resp_idx) {
+ unsigned int tag;
+ struct mv_crpb *response = &pp->crpb[pp->resp_idx];
+
+ pp->resp_idx = (pp->resp_idx + 1) & MV_MAX_Q_DEPTH_MASK;
+
+ if (IS_GEN_I(hpriv)) {
+ /* 50xx: no NCQ, only one command active at a time */
+ tag = ap->link.active_tag;
+ } else {
+ /* Gen II/IIE: get command tag from CRPB entry */
+ tag = le16_to_cpu(response->id) & 0x1f;
+ }
+ if (mv_process_crpb_response(ap, response, tag, ncq_enabled))
+ done_mask |= 1 << tag;
+ work_done = true;
+ }
+
+ if (work_done) {
+ ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+
+ /* Update the software queue position index in hardware */
+ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
+ (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT),
+ port_mmio + EDMA_RSP_Q_OUT_PTR);
+ }
+}
+
+static void mv_port_intr(struct ata_port *ap, u32 port_cause)
+{
+ struct mv_port_priv *pp;
+ int edma_was_enabled;
+
+ /*
+ * Grab a snapshot of the EDMA_EN flag setting,
+ * so that we have a consistent view for this port,
+ * even if something we call of our routines changes it.
+ */
+ pp = ap->private_data;
+ edma_was_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
+ /*
+ * Process completed CRPB response(s) before other events.
+ */
+ if (edma_was_enabled && (port_cause & DONE_IRQ)) {
+ mv_process_crpb_entries(ap, pp);
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
+ mv_handle_fbs_ncq_dev_err(ap);
+ }
+ /*
+ * Handle chip-reported errors, or continue on to handle PIO.
+ */
+ if (unlikely(port_cause & ERR_IRQ)) {
+ mv_err_intr(ap);
+ } else if (!edma_was_enabled) {
+ struct ata_queued_cmd *qc = mv_get_active_qc(ap);
+ if (qc)
+ ata_bmdma_port_intr(ap, qc);
+ else
+ mv_unexpected_intr(ap, edma_was_enabled);
+ }
+}
+
+/**
+ * mv_host_intr - Handle all interrupts on the given host controller
+ * @host: host specific structure
+ * @main_irq_cause: Main interrupt cause register for the chip.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base, *hc_mmio;
+ unsigned int handled = 0, port;
+
+ /* If asserted, clear the "all ports" IRQ coalescing bit */
+ if (main_irq_cause & ALL_PORTS_COAL_DONE)
+ writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE);
+
+ for (port = 0; port < hpriv->n_ports; port++) {
+ struct ata_port *ap = host->ports[port];
+ unsigned int p, shift, hardport, port_cause;
+
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+ /*
+ * Each hc within the host has its own hc_irq_cause register,
+ * where the interrupting ports bits get ack'd.
+ */
+ if (hardport == 0) { /* first port on this hc ? */
+ u32 hc_cause = (main_irq_cause >> shift) & HC0_IRQ_PEND;
+ u32 port_mask, ack_irqs;
+ /*
+ * Skip this entire hc if nothing pending for any ports
+ */
+ if (!hc_cause) {
+ port += MV_PORTS_PER_HC - 1;
+ continue;
+ }
+ /*
+ * We don't need/want to read the hc_irq_cause register,
+ * because doing so hurts performance, and
+ * main_irq_cause already gives us everything we need.
+ *
+ * But we do have to *write* to the hc_irq_cause to ack
+ * the ports that we are handling this time through.
+ *
+ * This requires that we create a bitmap for those
+ * ports which interrupted us, and use that bitmap
+ * to ack (only) those ports via hc_irq_cause.
+ */
+ ack_irqs = 0;
+ if (hc_cause & PORTS_0_3_COAL_DONE)
+ ack_irqs = HC_COAL_IRQ;
+ for (p = 0; p < MV_PORTS_PER_HC; ++p) {
+ if ((port + p) >= hpriv->n_ports)
+ break;
+ port_mask = (DONE_IRQ | ERR_IRQ) << (p * 2);
+ if (hc_cause & port_mask)
+ ack_irqs |= (DMA_IRQ | DEV_IRQ) << p;
+ }
+ hc_mmio = mv_hc_base_from_port(mmio, port);
+ writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE);
+ handled = 1;
+ }
+ /*
+ * Handle interrupts signalled for this port:
+ */
+ port_cause = (main_irq_cause >> shift) & (DONE_IRQ | ERR_IRQ);
+ if (port_cause)
+ mv_port_intr(ap, port_cause);
+ }
+ return handled;
+}
+
+static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ struct ata_port *ap;
+ struct ata_queued_cmd *qc;
+ struct ata_eh_info *ehi;
+ unsigned int i, err_mask, printed = 0;
+ u32 err_cause;
+
+ err_cause = readl(mmio + hpriv->irq_cause_offset);
+
+ dev_err(host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", err_cause);
+
+ DPRINTK("All regs @ PCI error\n");
+ mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
+
+ writelfl(0, mmio + hpriv->irq_cause_offset);
+
+ for (i = 0; i < host->n_ports; i++) {
+ ap = host->ports[i];
+ if (!ata_link_offline(&ap->link)) {
+ ehi = &ap->link.eh_info;
+ ata_ehi_clear_desc(ehi);
+ if (!printed++)
+ ata_ehi_push_desc(ehi,
+ "PCI err cause 0x%08x", err_cause);
+ err_mask = AC_ERR_HOST_BUS;
+ ehi->action = ATA_EH_RESET;
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ ata_port_freeze(ap);
+ }
+ }
+ return 1; /* handled */
+}
+
+/**
+ * mv_interrupt - Main interrupt event handler
+ * @irq: unused
+ * @dev_instance: private data; in this case the host structure
+ *
+ * Read the read only register to determine if any host
+ * controllers have pending interrupts. If so, call lower level
+ * routine to handle. Also check for PCI errors which are only
+ * reported here.
+ *
+ * LOCKING:
+ * This routine holds the host lock while processing pending
+ * interrupts.
+ */
+static irqreturn_t mv_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct mv_host_priv *hpriv = host->private_data;
+ unsigned int handled = 0;
+ int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
+ u32 main_irq_cause, pending_irqs;
+
+ spin_lock(&host->lock);
+
+ /* for MSI: block new interrupts while in here */
+ if (using_msi)
+ mv_write_main_irq_mask(0, hpriv);
+
+ main_irq_cause = readl(hpriv->main_irq_cause_addr);
+ pending_irqs = main_irq_cause & hpriv->main_irq_mask;
+ /*
+ * Deal with cases where we either have nothing pending, or have read
+ * a bogus register value which can indicate HW removal or PCI fault.
+ */
+ if (pending_irqs && main_irq_cause != 0xffffffffU) {
+ if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
+ handled = mv_pci_error(host, hpriv->base);
+ else
+ handled = mv_host_intr(host, pending_irqs);
+ }
+
+ /* for MSI: unmask; interrupt cause bits will retrigger now */
+ if (using_msi)
+ mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv);
+
+ spin_unlock(&host->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
+{
+ unsigned int ofs;
+
+ switch (sc_reg_in) {
+ case SCR_STATUS:
+ case SCR_ERROR:
+ case SCR_CONTROL:
+ ofs = sc_reg_in * sizeof(u32);
+ break;
+ default:
+ ofs = 0xffffffffU;
+ break;
+ }
+ return ofs;
+}
+
+static int mv5_scr_read(struct ata_link *link, unsigned int sc_reg_in, u32 *val)
+{
+ struct mv_host_priv *hpriv = link->ap->host->private_data;
+ void __iomem *mmio = hpriv->base;
+ void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no);
+ unsigned int ofs = mv5_scr_offset(sc_reg_in);
+
+ if (ofs != 0xffffffffU) {
+ *val = readl(addr + ofs);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static int mv5_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
+{
+ struct mv_host_priv *hpriv = link->ap->host->private_data;
+ void __iomem *mmio = hpriv->base;
+ void __iomem *addr = mv5_phy_base(mmio, link->ap->port_no);
+ unsigned int ofs = mv5_scr_offset(sc_reg_in);
+
+ if (ofs != 0xffffffffU) {
+ writelfl(val, addr + ofs);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ int early_5080;
+
+ early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
+
+ if (!early_5080) {
+ u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
+ tmp |= (1 << 0);
+ writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
+ }
+
+ mv_reset_pci_bus(host, mmio);
+}
+
+static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ writel(0x0fcfffff, mmio + FLASH_CTL);
+}
+
+static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio)
+{
+ void __iomem *phy_mmio = mv5_phy_base(mmio, idx);
+ u32 tmp;
+
+ tmp = readl(phy_mmio + MV5_PHY_MODE);
+
+ hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */
+ hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */
+}
+
+static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ u32 tmp;
+
+ writel(0, mmio + GPIO_PORT_CTL);
+
+ /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
+
+ tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
+ tmp |= ~(1 << 0);
+ writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL);
+}
+
+static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port)
+{
+ void __iomem *phy_mmio = mv5_phy_base(mmio, port);
+ const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5);
+ u32 tmp;
+ int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
+
+ if (fix_apm_sq) {
+ tmp = readl(phy_mmio + MV5_LTMODE);
+ tmp |= (1 << 19);
+ writel(tmp, phy_mmio + MV5_LTMODE);
+
+ tmp = readl(phy_mmio + MV5_PHY_CTL);
+ tmp &= ~0x3;
+ tmp |= 0x1;
+ writel(tmp, phy_mmio + MV5_PHY_CTL);
+ }
+
+ tmp = readl(phy_mmio + MV5_PHY_MODE);
+ tmp &= ~mask;
+ tmp |= hpriv->signal[port].pre;
+ tmp |= hpriv->signal[port].amps;
+ writel(tmp, phy_mmio + MV5_PHY_MODE);
+}
+
+
+#undef ZERO
+#define ZERO(reg) writel(0, port_mmio + (reg))
+static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ mv_reset_channel(hpriv, mmio, port);
+
+ ZERO(0x028); /* command */
+ writel(0x11f, port_mmio + EDMA_CFG);
+ ZERO(0x004); /* timer */
+ ZERO(0x008); /* irq err cause */
+ ZERO(0x00c); /* irq err mask */
+ ZERO(0x010); /* rq bah */
+ ZERO(0x014); /* rq inp */
+ ZERO(0x018); /* rq outp */
+ ZERO(0x01c); /* respq bah */
+ ZERO(0x024); /* respq outp */
+ ZERO(0x020); /* respq inp */
+ ZERO(0x02c); /* test control */
+ writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+}
+#undef ZERO
+
+#define ZERO(reg) writel(0, hc_mmio + (reg))
+static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int hc)
+{
+ void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+ u32 tmp;
+
+ ZERO(0x00c);
+ ZERO(0x010);
+ ZERO(0x014);
+ ZERO(0x018);
+
+ tmp = readl(hc_mmio + 0x20);
+ tmp &= 0x1c1c1c1c;
+ tmp |= 0x03030303;
+ writel(tmp, hc_mmio + 0x20);
+}
+#undef ZERO
+
+static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc)
+{
+ unsigned int hc, port;
+
+ for (hc = 0; hc < n_hc; hc++) {
+ for (port = 0; port < MV_PORTS_PER_HC; port++)
+ mv5_reset_hc_port(hpriv, mmio,
+ (hc * MV_PORTS_PER_HC) + port);
+
+ mv5_reset_one_hc(hpriv, mmio, hc);
+ }
+
+ return 0;
+}
+
+#undef ZERO
+#define ZERO(reg) writel(0, mmio + (reg))
+static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ u32 tmp;
+
+ tmp = readl(mmio + MV_PCI_MODE);
+ tmp &= 0xff00ffff;
+ writel(tmp, mmio + MV_PCI_MODE);
+
+ ZERO(MV_PCI_DISC_TIMER);
+ ZERO(MV_PCI_MSI_TRIGGER);
+ writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
+ ZERO(MV_PCI_SERR_MASK);
+ ZERO(hpriv->irq_cause_offset);
+ ZERO(hpriv->irq_mask_offset);
+ ZERO(MV_PCI_ERR_LOW_ADDRESS);
+ ZERO(MV_PCI_ERR_HIGH_ADDRESS);
+ ZERO(MV_PCI_ERR_ATTRIBUTE);
+ ZERO(MV_PCI_ERR_COMMAND);
+}
+#undef ZERO
+
+static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ u32 tmp;
+
+ mv5_reset_flash(hpriv, mmio);
+
+ tmp = readl(mmio + GPIO_PORT_CTL);
+ tmp &= 0x3;
+ tmp |= (1 << 5) | (1 << 6);
+ writel(tmp, mmio + GPIO_PORT_CTL);
+}
+
+/**
+ * mv6_reset_hc - Perform the 6xxx global soft reset
+ * @mmio: base address of the HBA
+ *
+ * This routine only applies to 6xxx parts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int n_hc)
+{
+ void __iomem *reg = mmio + PCI_MAIN_CMD_STS;
+ int i, rc = 0;
+ u32 t;
+
+ /* Following procedure defined in PCI "main command and status
+ * register" table.
+ */
+ t = readl(reg);
+ writel(t | STOP_PCI_MASTER, reg);
+
+ for (i = 0; i < 1000; i++) {
+ udelay(1);
+ t = readl(reg);
+ if (PCI_MASTER_EMPTY & t)
+ break;
+ }
+ if (!(PCI_MASTER_EMPTY & t)) {
+ printk(KERN_ERR DRV_NAME ": PCI master won't flush\n");
+ rc = 1;
+ goto done;
+ }
+
+ /* set reset */
+ i = 5;
+ do {
+ writel(t | GLOB_SFT_RST, reg);
+ t = readl(reg);
+ udelay(1);
+ } while (!(GLOB_SFT_RST & t) && (i-- > 0));
+
+ if (!(GLOB_SFT_RST & t)) {
+ printk(KERN_ERR DRV_NAME ": can't set global reset\n");
+ rc = 1;
+ goto done;
+ }
+
+ /* clear reset and *reenable the PCI master* (not mentioned in spec) */
+ i = 5;
+ do {
+ writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg);
+ t = readl(reg);
+ udelay(1);
+ } while ((GLOB_SFT_RST & t) && (i-- > 0));
+
+ if (GLOB_SFT_RST & t) {
+ printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
+ rc = 1;
+ }
+done:
+ return rc;
+}
+
+static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio)
+{
+ void __iomem *port_mmio;
+ u32 tmp;
+
+ tmp = readl(mmio + RESET_CFG);
+ if ((tmp & (1 << 0)) == 0) {
+ hpriv->signal[idx].amps = 0x7 << 8;
+ hpriv->signal[idx].pre = 0x1 << 5;
+ return;
+ }
+
+ port_mmio = mv_port_base(mmio, idx);
+ tmp = readl(port_mmio + PHY_MODE2);
+
+ hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
+ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
+}
+
+static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
+{
+ writel(0x00000060, mmio + GPIO_PORT_CTL);
+}
+
+static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ u32 hp_flags = hpriv->hp_flags;
+ int fix_phy_mode2 =
+ hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
+ int fix_phy_mode4 =
+ hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
+ u32 m2, m3;
+
+ if (fix_phy_mode2) {
+ m2 = readl(port_mmio + PHY_MODE2);
+ m2 &= ~(1 << 16);
+ m2 |= (1 << 31);
+ writel(m2, port_mmio + PHY_MODE2);
+
+ udelay(200);
+
+ m2 = readl(port_mmio + PHY_MODE2);
+ m2 &= ~((1 << 16) | (1 << 31));
+ writel(m2, port_mmio + PHY_MODE2);
+
+ udelay(200);
+ }
+
+ /*
+ * Gen-II/IIe PHY_MODE3 errata RM#2:
+ * Achieves better receiver noise performance than the h/w default:
+ */
+ m3 = readl(port_mmio + PHY_MODE3);
+ m3 = (m3 & 0x1f) | (0x5555601 << 5);
+
+ /* Guideline 88F5182 (GL# SATA-S11) */
+ if (IS_SOC(hpriv))
+ m3 &= ~0x1c;
+
+ if (fix_phy_mode4) {
+ u32 m4 = readl(port_mmio + PHY_MODE4);
+ /*
+ * Enforce reserved-bit restrictions on GenIIe devices only.
+ * For earlier chipsets, force only the internal config field
+ * (workaround for errata FEr SATA#10 part 1).
+ */
+ if (IS_GEN_IIE(hpriv))
+ m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+ else
+ m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
+ writel(m4, port_mmio + PHY_MODE4);
+ }
+ /*
+ * Workaround for 60x1-B2 errata SATA#13:
+ * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
+ * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+ * Or ensure we use writelfl() when writing PHY_MODE4.
+ */
+ writel(m3, port_mmio + PHY_MODE3);
+
+ /* Revert values of pre-emphasis and signal amps to the saved ones */
+ m2 = readl(port_mmio + PHY_MODE2);
+
+ m2 &= ~MV_M2_PREAMP_MASK;
+ m2 |= hpriv->signal[port].amps;
+ m2 |= hpriv->signal[port].pre;
+ m2 &= ~(1 << 16);
+
+ /* according to mvSata 3.6.1, some IIE values are fixed */
+ if (IS_GEN_IIE(hpriv)) {
+ m2 &= ~0xC30FF01F;
+ m2 |= 0x0000900F;
+ }
+
+ writel(m2, port_mmio + PHY_MODE2);
+}
+
+/* TODO: use the generic LED interface to configure the SATA Presence */
+/* & Acitivy LEDs on the board */
+static void mv_soc_enable_leds(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
+{
+ return;
+}
+
+static void mv_soc_read_preamp(struct mv_host_priv *hpriv, int idx,
+ void __iomem *mmio)
+{
+ void __iomem *port_mmio;
+ u32 tmp;
+
+ port_mmio = mv_port_base(mmio, idx);
+ tmp = readl(port_mmio + PHY_MODE2);
+
+ hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */
+ hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */
+}
+
+#undef ZERO
+#define ZERO(reg) writel(0, port_mmio + (reg))
+static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ mv_reset_channel(hpriv, mmio, port);
+
+ ZERO(0x028); /* command */
+ writel(0x101f, port_mmio + EDMA_CFG);
+ ZERO(0x004); /* timer */
+ ZERO(0x008); /* irq err cause */
+ ZERO(0x00c); /* irq err mask */
+ ZERO(0x010); /* rq bah */
+ ZERO(0x014); /* rq inp */
+ ZERO(0x018); /* rq outp */
+ ZERO(0x01c); /* respq bah */
+ ZERO(0x024); /* respq outp */
+ ZERO(0x020); /* respq inp */
+ ZERO(0x02c); /* test control */
+ writel(0x800, port_mmio + EDMA_IORDY_TMOUT);
+}
+
+#undef ZERO
+
+#define ZERO(reg) writel(0, hc_mmio + (reg))
+static void mv_soc_reset_one_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
+{
+ void __iomem *hc_mmio = mv_hc_base(mmio, 0);
+
+ ZERO(0x00c);
+ ZERO(0x010);
+ ZERO(0x014);
+
+}
+
+#undef ZERO
+
+static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int n_hc)
+{
+ unsigned int port;
+
+ for (port = 0; port < hpriv->n_ports; port++)
+ mv_soc_reset_hc_port(hpriv, mmio, port);
+
+ mv_soc_reset_one_hc(hpriv, mmio);
+
+ return 0;
+}
+
+static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
+ void __iomem *mmio)
+{
+ return;
+}
+
+static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
+{
+ return;
+}
+
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+ u32 reg;
+
+ reg = readl(port_mmio + PHY_MODE3);
+ reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
+ reg |= (0x1 << 27);
+ reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
+ reg |= (0x1 << 29);
+ writel(reg, port_mmio + PHY_MODE3);
+
+ reg = readl(port_mmio + PHY_MODE4);
+ reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+ reg |= (0x1 << 16);
+ writel(reg, port_mmio + PHY_MODE4);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN2);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN1);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ * soc_is_65 - check if the soc is 65 nano device
+ *
+ * Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ * register, this register should contain non-zero value and it exists only
+ * in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+ void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+ if (readl(port0_mmio + PHYCFG_OFS))
+ return true;
+ return false;
+}
+
+static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
+{
+ u32 ifcfg = readl(port_mmio + SATA_IFCFG);
+
+ ifcfg = (ifcfg & 0xf7f) | 0x9b1000; /* from chip spec */
+ if (want_gen2i)
+ ifcfg |= (1 << 7); /* enable gen2i speed */
+ writelfl(ifcfg, port_mmio + SATA_IFCFG);
+}
+
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
+ unsigned int port_no)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port_no);
+
+ /*
+ * The datasheet warns against setting EDMA_RESET when EDMA is active
+ * (but doesn't say what the problem might be). So we first try
+ * to disable the EDMA engine before doing the EDMA_RESET operation.
+ */
+ mv_stop_edma_engine(port_mmio);
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD);
+
+ if (!IS_GEN_I(hpriv)) {
+ /* Enable 3.0gb/s link speed: this survives EDMA_RESET */
+ mv_setup_ifcfg(port_mmio, 1);
+ }
+ /*
+ * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
+ * link, and physical layers. It resets all SATA interface registers
+ * (except for SATA_IFCFG), and issues a COMRESET to the dev.
+ */
+ writelfl(EDMA_RESET, port_mmio + EDMA_CMD);
+ udelay(25); /* allow reset propagation */
+ writelfl(0, port_mmio + EDMA_CMD);
+
+ hpriv->ops->phy_errata(hpriv, mmio, port_no);
+
+ if (IS_GEN_I(hpriv))
+ mdelay(1);
+}
+
+static void mv_pmp_select(struct ata_port *ap, int pmp)
+{
+ if (sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 reg = readl(port_mmio + SATA_IFCTL);
+ int old = reg & 0xf;
+
+ if (old != pmp) {
+ reg = (reg & ~0xf) | pmp;
+ writelfl(reg, port_mmio + SATA_IFCTL);
+ }
+ }
+}
+
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return sata_std_hardreset(link, class, deadline);
+}
+
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return ata_sff_softreset(link, class, deadline);
+}
+
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ void __iomem *mmio = hpriv->base;
+ int rc, attempts = 0, extra = 0;
+ u32 sstatus;
+ bool online;
+
+ mv_reset_channel(hpriv, mmio, ap->port_no);
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ pp->pp_flags &=
+ ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY);
+
+ /* Workaround for errata FEr SATA#10 (part 2) */
+ do {
+ const unsigned long *timing =
+ sata_ehc_deb_timing(&link->eh_context);
+
+ rc = sata_link_hardreset(link, timing, deadline + extra,
+ &online, NULL);
+ rc = online ? -EAGAIN : rc;
+ if (rc)
+ return rc;
+ sata_scr_read(link, SCR_STATUS, &sstatus);
+ if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
+ /* Force 1.5gb/s link speed and try again */
+ mv_setup_ifcfg(mv_ap_base(ap), 0);
+ if (time_after(jiffies + HZ, deadline))
+ extra = HZ; /* only extend it once, max */
+ }
+ } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
+ mv_save_cached_regs(ap);
+ mv_edma_cfg(ap, 0, 0);
+
+ return rc;
+}
+
+static void mv_eh_freeze(struct ata_port *ap)
+{
+ mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, 0);
+}
+
+static void mv_eh_thaw(struct ata_port *ap)
+{
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ unsigned int port = ap->port_no;
+ unsigned int hardport = mv_hardport_from_port(port);
+ void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port);
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 hc_irq_cause;
+
+ /* clear EDMA errors on this port */
+ writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE);
+
+ /* clear pending irq events */
+ hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+ writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE);
+
+ mv_enable_port_irqs(ap, ERR_IRQ);
+}
+
+/**
+ * mv_port_init - Perform some early initialization on a single port.
+ * @port: libata data structure storing shadow register addresses
+ * @port_mmio: base address of the port
+ *
+ * Initialize shadow register mmio addresses, clear outstanding
+ * interrupts on the port, and unmask interrupts for the future
+ * start of the port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
+{
+ void __iomem *serr, *shd_base = port_mmio + SHD_BLK;
+
+ /* PIO related setup
+ */
+ port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA);
+ port->error_addr =
+ port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR);
+ port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT);
+ port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL);
+ port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM);
+ port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH);
+ port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE);
+ port->status_addr =
+ port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
+ /* special case: control/altstatus doesn't have ATA_REG_ address */
+ port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST;
+
+ /* Clear any currently outstanding port interrupt conditions */
+ serr = port_mmio + mv_scr_offset(SCR_ERROR);
+ writelfl(readl(serr), serr);
+ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE);
+
+ /* unmask all non-transient EDMA error interrupts */
+ writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK);
+
+ VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
+ readl(port_mmio + EDMA_CFG),
+ readl(port_mmio + EDMA_ERR_IRQ_CAUSE),
+ readl(port_mmio + EDMA_ERR_IRQ_MASK));
+}
+
+static unsigned int mv_in_pcix_mode(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
+ return 0; /* not PCI-X capable */
+ reg = readl(mmio + MV_PCI_MODE);
+ if ((reg & MV_PCI_MODE_MASK) == 0)
+ return 0; /* conventional PCI mode */
+ return 1; /* chip is in PCI-X mode */
+}
+
+static int mv_pci_cut_through_okay(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+ u32 reg;
+
+ if (!mv_in_pcix_mode(host)) {
+ reg = readl(mmio + MV_PCI_COMMAND);
+ if (reg & MV_PCI_COMMAND_MRDTRIG)
+ return 0; /* not okay */
+ }
+ return 1; /* okay */
+}
+
+static void mv_60x1b2_errata_pci7(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+
+ /* workaround for 60x1-B2 errata PCI#7 */
+ if (mv_in_pcix_mode(host)) {
+ u32 reg = readl(mmio + MV_PCI_COMMAND);
+ writelfl(reg & ~MV_PCI_COMMAND_MWRCOM, mmio + MV_PCI_COMMAND);
+ }
+}
+
+static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ struct mv_host_priv *hpriv = host->private_data;
+ u32 hp_flags = hpriv->hp_flags;
+
+ switch (board_idx) {
+ case chip_5080:
+ hpriv->ops = &mv5xxx_ops;
+ hp_flags |= MV_HP_GEN_I;
+
+ switch (pdev->revision) {
+ case 0x1:
+ hp_flags |= MV_HP_ERRATA_50XXB0;
+ break;
+ case 0x3:
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ default:
+ dev_warn(&pdev->dev,
+ "Applying 50XXB2 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ }
+ break;
+
+ case chip_504x:
+ case chip_508x:
+ hpriv->ops = &mv5xxx_ops;
+ hp_flags |= MV_HP_GEN_I;
+
+ switch (pdev->revision) {
+ case 0x0:
+ hp_flags |= MV_HP_ERRATA_50XXB0;
+ break;
+ case 0x3:
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ default:
+ dev_warn(&pdev->dev,
+ "Applying B2 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_50XXB2;
+ break;
+ }
+ break;
+
+ case chip_604x:
+ case chip_608x:
+ hpriv->ops = &mv6xxx_ops;
+ hp_flags |= MV_HP_GEN_II;
+
+ switch (pdev->revision) {
+ case 0x7:
+ mv_60x1b2_errata_pci7(host);
+ hp_flags |= MV_HP_ERRATA_60X1B2;
+ break;
+ case 0x9:
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ default:
+ dev_warn(&pdev->dev,
+ "Applying B2 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_60X1B2;
+ break;
+ }
+ break;
+
+ case chip_7042:
+ hp_flags |= MV_HP_PCIE | MV_HP_CUT_THROUGH;
+ if (pdev->vendor == PCI_VENDOR_ID_TTI &&
+ (pdev->device == 0x2300 || pdev->device == 0x2310))
+ {
+ /*
+ * Highpoint RocketRAID PCIe 23xx series cards:
+ *
+ * Unconfigured drives are treated as "Legacy"
+ * by the BIOS, and it overwrites sector 8 with
+ * a "Lgcy" metadata block prior to Linux boot.
+ *
+ * Configured drives (RAID or JBOD) leave sector 8
+ * alone, but instead overwrite a high numbered
+ * sector for the RAID metadata. This sector can
+ * be determined exactly, by truncating the physical
+ * drive capacity to a nice even GB value.
+ *
+ * RAID metadata is at: (dev->n_sectors & ~0xfffff)
+ *
+ * Warn the user, lest they think we're just buggy.
+ */
+ printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID"
+ " BIOS CORRUPTS DATA on all attached drives,"
+ " regardless of if/how they are configured."
+ " BEWARE!\n");
+ printk(KERN_WARNING DRV_NAME ": For data safety, do not"
+ " use sectors 8-9 on \"Legacy\" drives,"
+ " and avoid the final two gigabytes on"
+ " all RocketRAID BIOS initialized drives.\n");
+ }
+ /* drop through */
+ case chip_6042:
+ hpriv->ops = &mv6xxx_ops;
+ hp_flags |= MV_HP_GEN_IIE;
+ if (board_idx == chip_6042 && mv_pci_cut_through_okay(host))
+ hp_flags |= MV_HP_CUT_THROUGH;
+
+ switch (pdev->revision) {
+ case 0x2: /* Rev.B0: the first/only public release */
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ default:
+ dev_warn(&pdev->dev,
+ "Applying 60X1C0 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ }
+ break;
+ case chip_soc:
+ if (soc_is_65n(hpriv))
+ hpriv->ops = &mv_soc_65n_ops;
+ else
+ hpriv->ops = &mv_soc_ops;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+ MV_HP_ERRATA_60X1C0;
+ break;
+
+ default:
+ dev_err(host->dev, "BUG: invalid board index %u\n", board_idx);
+ return 1;
+ }
+
+ hpriv->hp_flags = hp_flags;
+ if (hp_flags & MV_HP_PCIE) {
+ hpriv->irq_cause_offset = PCIE_IRQ_CAUSE;
+ hpriv->irq_mask_offset = PCIE_IRQ_MASK;
+ hpriv->unmask_all_irqs = PCIE_UNMASK_ALL_IRQS;
+ } else {
+ hpriv->irq_cause_offset = PCI_IRQ_CAUSE;
+ hpriv->irq_mask_offset = PCI_IRQ_MASK;
+ hpriv->unmask_all_irqs = PCI_UNMASK_ALL_IRQS;
+ }
+
+ return 0;
+}
+
+/**
+ * mv_init_host - Perform some early initialization of the host.
+ * @host: ATA host to initialize
+ *
+ * If possible, do an early global reset of the host. Then do
+ * our port init and clear/unmask all/relevant host interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_init_host(struct ata_host *host)
+{
+ int rc = 0, n_hc, port, hc;
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+
+ rc = mv_chip_id(host, hpriv->board_idx);
+ if (rc)
+ goto done;
+
+ if (IS_SOC(hpriv)) {
+ hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE;
+ hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK;
+ } else {
+ hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE;
+ hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK;
+ }
+
+ /* initialize shadow irq mask with register's value */
+ hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
+
+ /* global interrupt mask: 0 == mask everything */
+ mv_set_main_irq_mask(host, ~0, 0);
+
+ n_hc = mv_get_hc_count(host->ports[0]->flags);
+
+ for (port = 0; port < host->n_ports; port++)
+ if (hpriv->ops->read_preamp)
+ hpriv->ops->read_preamp(hpriv, port, mmio);
+
+ rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
+ if (rc)
+ goto done;
+
+ hpriv->ops->reset_flash(hpriv, mmio);
+ hpriv->ops->reset_bus(host, mmio);
+ hpriv->ops->enable_leds(hpriv, mmio);
+
+ for (port = 0; port < host->n_ports; port++) {
+ struct ata_port *ap = host->ports[port];
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+
+ mv_port_init(&ap->ioaddr, port_mmio);
+ }
+
+ for (hc = 0; hc < n_hc; hc++) {
+ void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+
+ VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
+ "(before clear)=0x%08x\n", hc,
+ readl(hc_mmio + HC_CFG),
+ readl(hc_mmio + HC_IRQ_CAUSE));
+
+ /* Clear any currently outstanding hc interrupt conditions */
+ writelfl(0, hc_mmio + HC_IRQ_CAUSE);
+ }
+
+ if (!IS_SOC(hpriv)) {
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + hpriv->irq_cause_offset);
+
+ /* and unmask interrupt generation for host regs */
+ writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_offset);
+ }
+
+ /*
+ * enable only global host interrupts for now.
+ * The per-port interrupts get done later as ports are set up.
+ */
+ mv_set_main_irq_mask(host, 0, PCI_ERR);
+ mv_set_irq_coalescing(host, irq_coalescing_io_count,
+ irq_coalescing_usecs);
+done:
+ return rc;
+}
+
+static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
+{
+ hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
+ MV_CRQB_Q_SZ, 0);
+ if (!hpriv->crqb_pool)
+ return -ENOMEM;
+
+ hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
+ MV_CRPB_Q_SZ, 0);
+ if (!hpriv->crpb_pool)
+ return -ENOMEM;
+
+ hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
+ MV_SG_TBL_SZ, 0);
+ if (!hpriv->sg_tbl_pool)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
+ const struct mbus_dram_target_info *dram)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ writel(0, hpriv->base + WINDOW_CTRL(i));
+ writel(0, hpriv->base + WINDOW_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ hpriv->base + WINDOW_CTRL(i));
+ writel(cs->base, hpriv->base + WINDOW_BASE(i));
+ }
+}
+
+/**
+ * mv_platform_probe - handle a positive probe of an soc Marvell
+ * host
+ * @pdev: platform device found
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_platform_probe(struct platform_device *pdev)
+{
+ const struct mv_sata_platform_data *mv_platform_data;
+ const struct mbus_dram_target_info *dram;
+ const struct ata_port_info *ppi[] =
+ { &mv_port_info[chip_soc], NULL };
+ struct ata_host *host;
+ struct mv_host_priv *hpriv;
+ struct resource *res;
+ int n_ports = 0;
+ int rc;
+
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+ /*
+ * Simple resource validation ..
+ */
+ if (unlikely(pdev->num_resources != 2)) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get the register base first
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -EINVAL;
+
+ /* allocate host */
+ mv_platform_data = pdev->dev.platform_data;
+ n_ports = mv_platform_data->n_ports;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+
+ if (!host || !hpriv)
+ return -ENOMEM;
+ host->private_data = hpriv;
+ hpriv->n_ports = n_ports;
+ hpriv->board_idx = chip_soc;
+
+ host->iomap = NULL;
+ hpriv->base = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ hpriv->base -= SATAHC0_REG_BASE;
+
+#if defined(CONFIG_HAVE_CLK)
+ hpriv->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(hpriv->clk))
+ dev_notice(&pdev->dev, "cannot get clkdev\n");
+ else
+ clk_enable(hpriv->clk);
+#endif
+
+ /*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ dram = mv_mbus_dram_info();
+ if (dram)
+ mv_conf_mbus_windows(hpriv, dram);
+
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ goto err;
+
+ /* initialize adapter */
+ rc = mv_init_host(host);
+ if (rc)
+ goto err;
+
+ dev_info(&pdev->dev, "slots %u ports %d\n",
+ (unsigned)MV_MAX_Q_DEPTH, host->n_ports);
+
+ rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
+ IRQF_SHARED, &mv6_sht);
+ if (!rc)
+ return 0;
+
+err:
+#if defined(CONFIG_HAVE_CLK)
+ if (!IS_ERR(hpriv->clk)) {
+ clk_disable(hpriv->clk);
+ clk_put(hpriv->clk);
+ }
+#endif
+
+ return rc;
+}
+
+/*
+ *
+ * mv_platform_remove - unplug a platform interface
+ * @pdev: platform device
+ *
+ * A platform bus SATA device has been unplugged. Perform the needed
+ * cleanup. Also called on module unload for any active devices.
+ */
+static int __devexit mv_platform_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = platform_get_drvdata(pdev);
+#if defined(CONFIG_HAVE_CLK)
+ struct mv_host_priv *hpriv = host->private_data;
+#endif
+ ata_host_detach(host);
+
+#if defined(CONFIG_HAVE_CLK)
+ if (!IS_ERR(hpriv->clk)) {
+ clk_disable(hpriv->clk);
+ clk_put(hpriv->clk);
+ }
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct ata_host *host = platform_get_drvdata(pdev);
+ if (host)
+ return ata_host_suspend(host, state);
+ else
+ return 0;
+}
+
+static int mv_platform_resume(struct platform_device *pdev)
+{
+ struct ata_host *host = platform_get_drvdata(pdev);
+ const struct mbus_dram_target_info *dram;
+ int ret;
+
+ if (host) {
+ struct mv_host_priv *hpriv = host->private_data;
+
+ /*
+ * (Re-)program MBUS remapping windows if we are asked to.
+ */
+ dram = mv_mbus_dram_info();
+ if (dram)
+ mv_conf_mbus_windows(hpriv, dram);
+
+ /* initialize adapter */
+ ret = mv_init_host(host);
+ if (ret) {
+ printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+ return ret;
+ }
+ ata_host_resume(host);
+ }
+
+ return 0;
+}
+#else
+#define mv_platform_suspend NULL
+#define mv_platform_resume NULL
+#endif
+
+static struct platform_driver mv_platform_driver = {
+ .probe = mv_platform_probe,
+ .remove = __devexit_p(mv_platform_remove),
+ .suspend = mv_platform_suspend,
+ .resume = mv_platform_resume,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+
+#ifdef CONFIG_PCI
+static int mv_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+#ifdef CONFIG_PM
+static int mv_pci_device_resume(struct pci_dev *pdev);
+#endif
+
+
+static struct pci_driver mv_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mv_pci_tbl,
+ .probe = mv_pci_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = mv_pci_device_resume,
+#endif
+
+};
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(&pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(&pdev->dev, "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(&pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+
+ return rc;
+}
+
+/**
+ * mv_print_info - Dump key info to kernel log for perusal.
+ * @host: ATA host to print info about
+ *
+ * FIXME: complete this.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_print_info(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ struct mv_host_priv *hpriv = host->private_data;
+ u8 scc;
+ const char *scc_s, *gen;
+
+ /* Use this to determine the HW stepping of the chip so we know
+ * what errata to workaround
+ */
+ pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
+ if (scc == 0)
+ scc_s = "SCSI";
+ else if (scc == 0x01)
+ scc_s = "RAID";
+ else
+ scc_s = "?";
+
+ if (IS_GEN_I(hpriv))
+ gen = "I";
+ else if (IS_GEN_II(hpriv))
+ gen = "II";
+ else if (IS_GEN_IIE(hpriv))
+ gen = "IIE";
+ else
+ gen = "?";
+
+ dev_info(&pdev->dev, "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
+ gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
+ scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
+}
+
+/**
+ * mv_pci_init_one - handle a positive probe of a PCI Marvell host
+ * @pdev: PCI device found
+ * @ent: PCI device ID entry for the matched host
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ unsigned int board_idx = (unsigned int)ent->driver_data;
+ const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
+ struct ata_host *host;
+ struct mv_host_priv *hpriv;
+ int n_ports, port, rc;
+
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+ /* allocate host */
+ n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!host || !hpriv)
+ return -ENOMEM;
+ host->private_data = hpriv;
+ hpriv->n_ports = n_ports;
+ hpriv->board_idx = board_idx;
+
+ /* acquire resources */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+ host->iomap = pcim_iomap_table(pdev);
+ hpriv->base = host->iomap[MV_PRIMARY_BAR];
+
+ rc = pci_go_64(pdev);
+ if (rc)
+ return rc;
+
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ return rc;
+
+ for (port = 0; port < host->n_ports; port++) {
+ struct ata_port *ap = host->ports[port];
+ void __iomem *port_mmio = mv_port_base(hpriv->base, port);
+ unsigned int offset = port_mmio - hpriv->base;
+
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
+ }
+
+ /* initialize adapter */
+ rc = mv_init_host(host);
+ if (rc)
+ return rc;
+
+ /* Enable message-switched interrupts, if requested */
+ if (msi && pci_enable_msi(pdev) == 0)
+ hpriv->hp_flags |= MV_HP_FLAG_MSI;
+
+ mv_dump_pci_cfg(pdev, 0x68);
+ mv_print_info(host);
+
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+ return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
+ IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
+}
+
+#ifdef CONFIG_PM
+static int mv_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ /* initialize adapter */
+ rc = mv_init_host(host);
+ if (rc)
+ return rc;
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+#endif
+
+static int mv_platform_probe(struct platform_device *pdev);
+static int __devexit mv_platform_remove(struct platform_device *pdev);
+
+static int __init mv_init(void)
+{
+ int rc = -ENODEV;
+#ifdef CONFIG_PCI
+ rc = pci_register_driver(&mv_pci_driver);
+ if (rc < 0)
+ return rc;
+#endif
+ rc = platform_driver_register(&mv_platform_driver);
+
+#ifdef CONFIG_PCI
+ if (rc < 0)
+ pci_unregister_driver(&mv_pci_driver);
+#endif
+ return rc;
+}
+
+static void __exit mv_exit(void)
+{
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&mv_pci_driver);
+#endif
+ platform_driver_unregister(&mv_platform_driver);
+}
+
+MODULE_AUTHOR("Brett Russ");
+MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(mv_init);
+module_exit(mv_exit);