zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/Makefile b/ap/os/linux/linux-3.4.x/drivers/base/power/Makefile
new file mode 100644
index 0000000..217025a
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_PM) += sysfs.o generic_ops.o common.o qos.o
+obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o
+obj-$(CONFIG_PM_RUNTIME) += runtime.o
+obj-$(CONFIG_PM_TRACE_RTC) += trace.o
+obj-$(CONFIG_PM_OPP) += opp.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS) += domain.o domain_governor.o
+obj-$(CONFIG_HAVE_CLK) += clock_ops.o
+obj-$(CONFIG_ZX_PM_SUSPEND) += zx-suspend.o
+
+ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/clock_ops.c b/ap/os/linux/linux-3.4.x/drivers/base/power/clock_ops.c
new file mode 100644
index 0000000..869d7ff
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/clock_ops.c
@@ -0,0 +1,487 @@
+/*
+ * drivers/base/power/clock_ops.c - Generic clock manipulation PM callbacks
+ *
+ * Copyright (c) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_clock.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#ifdef CONFIG_PM
+
+enum pce_status {
+ PCE_STATUS_NONE = 0,
+ PCE_STATUS_ACQUIRED,
+ PCE_STATUS_ENABLED,
+ PCE_STATUS_ERROR,
+};
+
+struct pm_clock_entry {
+ struct list_head node;
+ char *con_id;
+ struct clk *clk;
+ enum pce_status status;
+};
+
+/**
+ * pm_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
+{
+ ce->clk = clk_get(dev, ce->con_id);
+ if (IS_ERR(ce->clk)) {
+ ce->status = PCE_STATUS_ERROR;
+ } else {
+ ce->status = PCE_STATUS_ACQUIRED;
+ dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+ }
+}
+
+/**
+ * pm_clk_add - Start using a device clock for power management.
+ * @dev: Device whose clock is going to be used for power management.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the power management of @dev.
+ */
+int pm_clk_add(struct device *dev, const char *con_id)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!psd)
+ return -EINVAL;
+
+ ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+ if (!ce) {
+ dev_err(dev, "Not enough memory for clock entry.\n");
+ return -ENOMEM;
+ }
+
+ if (con_id) {
+ ce->con_id = kstrdup(con_id, GFP_KERNEL);
+ if (!ce->con_id) {
+ dev_err(dev,
+ "Not enough memory for clock connection ID.\n");
+ kfree(ce);
+ return -ENOMEM;
+ }
+ }
+
+ pm_clk_acquire(dev, ce);
+
+ spin_lock_irq(&psd->lock);
+ list_add_tail(&ce->node, &psd->clock_list);
+ spin_unlock_irq(&psd->lock);
+ return 0;
+}
+
+/**
+ * __pm_clk_remove - Destroy PM clock entry.
+ * @ce: PM clock entry to destroy.
+ */
+static void __pm_clk_remove(struct pm_clock_entry *ce)
+{
+ if (!ce)
+ return;
+
+ if (ce->status < PCE_STATUS_ERROR) {
+ if (ce->status == PCE_STATUS_ENABLED)
+ clk_disable(ce->clk);
+
+ if (ce->status >= PCE_STATUS_ACQUIRED)
+ clk_put(ce->clk);
+ }
+
+ kfree(ce->con_id);
+ kfree(ce);
+}
+
+/**
+ * pm_clk_remove - Stop using a device clock for power management.
+ * @dev: Device whose clock should not be used for PM any more.
+ * @con_id: Connection ID of the clock.
+ *
+ * Remove the clock represented by @con_id from the list of clocks used for
+ * the power management of @dev.
+ */
+void pm_clk_remove(struct device *dev, const char *con_id)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!psd)
+ return;
+
+ spin_lock_irq(&psd->lock);
+
+ list_for_each_entry(ce, &psd->clock_list, node) {
+ if (!con_id && !ce->con_id)
+ goto remove;
+ else if (!con_id || !ce->con_id)
+ continue;
+ else if (!strcmp(con_id, ce->con_id))
+ goto remove;
+ }
+
+ spin_unlock_irq(&psd->lock);
+ return;
+
+ remove:
+ list_del(&ce->node);
+ spin_unlock_irq(&psd->lock);
+
+ __pm_clk_remove(ce);
+}
+
+/**
+ * pm_clk_init - Initialize a device's list of power management clocks.
+ * @dev: Device to initialize the list of PM clocks for.
+ *
+ * Initialize the lock and clock_list members of the device's pm_subsys_data
+ * object.
+ */
+void pm_clk_init(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ if (psd)
+ INIT_LIST_HEAD(&psd->clock_list);
+}
+
+/**
+ * pm_clk_create - Create and initialize a device's list of PM clocks.
+ * @dev: Device to create and initialize the list of PM clocks for.
+ *
+ * Allocate a struct pm_subsys_data object, initialize its lock and clock_list
+ * members and make the @dev's power.subsys_data field point to it.
+ */
+int pm_clk_create(struct device *dev)
+{
+ int ret = dev_pm_get_subsys_data(dev);
+ return ret < 0 ? ret : 0;
+}
+
+/**
+ * pm_clk_destroy - Destroy a device's list of power management clocks.
+ * @dev: Device to destroy the list of PM clocks for.
+ *
+ * Clear the @dev's power.subsys_data field, remove the list of clock entries
+ * from the struct pm_subsys_data object pointed to by it before and free
+ * that object.
+ */
+void pm_clk_destroy(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce, *c;
+ struct list_head list;
+
+ if (!psd)
+ return;
+
+ INIT_LIST_HEAD(&list);
+
+ spin_lock_irq(&psd->lock);
+
+ list_for_each_entry_safe_reverse(ce, c, &psd->clock_list, node)
+ list_move(&ce->node, &list);
+
+ spin_unlock_irq(&psd->lock);
+
+ dev_pm_put_subsys_data(dev);
+
+ list_for_each_entry_safe_reverse(ce, c, &list, node) {
+ list_del(&ce->node);
+ __pm_clk_remove(ce);
+ }
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_RUNTIME
+
+/**
+ * pm_clk_suspend - Disable clocks in a device's PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_clk_suspend(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+ unsigned long flags;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!psd)
+ return 0;
+
+ spin_lock_irqsave(&psd->lock, flags);
+
+ list_for_each_entry_reverse(ce, &psd->clock_list, node) {
+ if (ce->status < PCE_STATUS_ERROR) {
+ if (ce->status == PCE_STATUS_ENABLED)
+ clk_disable(ce->clk);
+ ce->status = PCE_STATUS_ACQUIRED;
+ }
+ }
+
+ spin_unlock_irqrestore(&psd->lock, flags);
+
+ return 0;
+}
+
+/**
+ * pm_clk_resume - Enable clocks in a device's PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_clk_resume(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+ unsigned long flags;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!psd)
+ return 0;
+
+ spin_lock_irqsave(&psd->lock, flags);
+
+ list_for_each_entry(ce, &psd->clock_list, node) {
+ if (ce->status < PCE_STATUS_ERROR) {
+ clk_enable(ce->clk);
+ ce->status = PCE_STATUS_ENABLED;
+ }
+ }
+
+ spin_unlock_irqrestore(&psd->lock, flags);
+
+ return 0;
+}
+
+/**
+ * pm_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the pm_domain member of that object is copied to the device's
+ * pm_domain field and its con_ids member is used to populate the device's list
+ * of PM clocks, depending on @action.
+ *
+ * If the device's pm_domain field is already populated with a value different
+ * from the one stored in the struct pm_clk_notifier_block object, the function
+ * does nothing.
+ */
+static int pm_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+ char **con_id;
+ int error;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (dev->pm_domain)
+ break;
+
+ error = pm_clk_create(dev);
+ if (error)
+ break;
+
+ dev->pm_domain = clknb->pm_domain;
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ pm_clk_add(dev, *con_id);
+ } else {
+ pm_clk_add(dev, NULL);
+ }
+
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (dev->pm_domain != clknb->pm_domain)
+ break;
+
+ dev->pm_domain = NULL;
+ pm_clk_destroy(dev);
+ break;
+ }
+
+ return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM
+
+/**
+ * pm_clk_suspend - Disable clocks in a device's PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_clk_suspend(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+ unsigned long flags;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ /* If there is no driver, the clocks are already disabled. */
+ if (!psd || !dev->driver)
+ return 0;
+
+ spin_lock_irqsave(&psd->lock, flags);
+
+ list_for_each_entry_reverse(ce, &psd->clock_list, node)
+ clk_disable(ce->clk);
+
+ spin_unlock_irqrestore(&psd->lock, flags);
+
+ return 0;
+}
+
+/**
+ * pm_clk_resume - Enable clocks in a device's PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_clk_resume(struct device *dev)
+{
+ struct pm_subsys_data *psd = dev_to_psd(dev);
+ struct pm_clock_entry *ce;
+ unsigned long flags;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ /* If there is no driver, the clocks should remain disabled. */
+ if (!psd || !dev->driver)
+ return 0;
+
+ spin_lock_irqsave(&psd->lock, flags);
+
+ list_for_each_entry(ce, &psd->clock_list, node)
+ clk_enable(ce->clk);
+
+ spin_unlock_irqrestore(&psd->lock, flags);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+/**
+ * enable_clock - Enable a device clock.
+ * @dev: Device whose clock is to be enabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void enable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_enable(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced on.\n");
+ }
+}
+
+/**
+ * disable_clock - Disable a device clock.
+ * @dev: Device whose clock is to be disabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void disable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_disable(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced off.\n");
+ }
+}
+
+/**
+ * pm_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the con_ids member of that object is used to enable or disable
+ * the device's clocks, depending on @action.
+ */
+static int pm_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+ char **con_id;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_BIND_DRIVER:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ enable_clock(dev, *con_id);
+ } else {
+ enable_clock(dev, NULL);
+ }
+ break;
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ disable_clock(dev, *con_id);
+ } else {
+ disable_clock(dev, NULL);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+/**
+ * pm_clk_add_notifier - Add bus type notifier for power management clocks.
+ * @bus: Bus type to add the notifier to.
+ * @clknb: Notifier to be added to the given bus type.
+ *
+ * The nb member of @clknb is not expected to be initialized and its
+ * notifier_call member will be replaced with pm_clk_notify(). However,
+ * the remaining members of @clknb should be populated prior to calling this
+ * routine.
+ */
+void pm_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb)
+{
+ if (!bus || !clknb)
+ return;
+
+ clknb->nb.notifier_call = pm_clk_notify;
+ bus_register_notifier(bus, &clknb->nb);
+}
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/common.c b/ap/os/linux/linux-3.4.x/drivers/base/power/common.c
new file mode 100644
index 0000000..a14085c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/common.c
@@ -0,0 +1,87 @@
+/*
+ * drivers/base/power/common.c - Common device power management code.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/pm_clock.h>
+
+/**
+ * dev_pm_get_subsys_data - Create or refcount power.subsys_data for device.
+ * @dev: Device to handle.
+ *
+ * If power.subsys_data is NULL, point it to a new object, otherwise increment
+ * its reference counter. Return 1 if a new object has been created, otherwise
+ * return 0 or error code.
+ */
+int dev_pm_get_subsys_data(struct device *dev)
+{
+ struct pm_subsys_data *psd;
+ int ret = 0;
+
+ psd = kzalloc(sizeof(*psd), GFP_KERNEL);
+ if (!psd)
+ return -ENOMEM;
+
+ spin_lock_irq(&dev->power.lock);
+
+ if (dev->power.subsys_data) {
+ dev->power.subsys_data->refcount++;
+ } else {
+ spin_lock_init(&psd->lock);
+ psd->refcount = 1;
+ dev->power.subsys_data = psd;
+ pm_clk_init(dev);
+ psd = NULL;
+ ret = 1;
+ }
+
+ spin_unlock_irq(&dev->power.lock);
+
+ /* kfree() verifies that its argument is nonzero. */
+ kfree(psd);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_get_subsys_data);
+
+/**
+ * dev_pm_put_subsys_data - Drop reference to power.subsys_data.
+ * @dev: Device to handle.
+ *
+ * If the reference counter of power.subsys_data is zero after dropping the
+ * reference, power.subsys_data is removed. Return 1 if that happens or 0
+ * otherwise.
+ */
+int dev_pm_put_subsys_data(struct device *dev)
+{
+ struct pm_subsys_data *psd;
+ int ret = 0;
+
+ spin_lock_irq(&dev->power.lock);
+
+ psd = dev_to_psd(dev);
+ if (!psd) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (--psd->refcount == 0) {
+ dev->power.subsys_data = NULL;
+ kfree(psd);
+ ret = 1;
+ }
+
+ out:
+ spin_unlock_irq(&dev->power.lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_put_subsys_data);
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/domain.c b/ap/os/linux/linux-3.4.x/drivers/base/power/domain.c
new file mode 100644
index 0000000..83aa694
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/domain.c
@@ -0,0 +1,1815 @@
+/*
+ * drivers/base/power/domain.c - Common code related to device power domains.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_qos.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+#include <linux/export.h>
+
+#define GENPD_DEV_CALLBACK(genpd, type, callback, dev) \
+({ \
+ type (*__routine)(struct device *__d); \
+ type __ret = (type)0; \
+ \
+ __routine = genpd->dev_ops.callback; \
+ if (__routine) { \
+ __ret = __routine(dev); \
+ } else { \
+ __routine = dev_gpd_data(dev)->ops.callback; \
+ if (__routine) \
+ __ret = __routine(dev); \
+ } \
+ __ret; \
+})
+
+#define GENPD_DEV_TIMED_CALLBACK(genpd, type, callback, dev, field, name) \
+({ \
+ ktime_t __start = ktime_get(); \
+ type __retval = GENPD_DEV_CALLBACK(genpd, type, callback, dev); \
+ s64 __elapsed = ktime_to_ns(ktime_sub(ktime_get(), __start)); \
+ struct gpd_timing_data *__td = &dev_gpd_data(dev)->td; \
+ if (!__retval && __elapsed > __td->field) { \
+ __td->field = __elapsed; \
+ dev_warn(dev, name " latency exceeded, new value %lld ns\n", \
+ __elapsed); \
+ genpd->max_off_time_changed = true; \
+ __td->constraint_changed = true; \
+ } \
+ __retval; \
+})
+
+static LIST_HEAD(gpd_list);
+static DEFINE_MUTEX(gpd_list_lock);
+
+#ifdef CONFIG_PM
+
+struct generic_pm_domain *dev_to_genpd(struct device *dev)
+{
+ if (IS_ERR_OR_NULL(dev->pm_domain))
+ return ERR_PTR(-EINVAL);
+
+ return pd_to_genpd(dev->pm_domain);
+}
+
+static int genpd_stop_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_TIMED_CALLBACK(genpd, int, stop, dev,
+ stop_latency_ns, "stop");
+}
+
+static int genpd_start_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_TIMED_CALLBACK(genpd, int, start, dev,
+ start_latency_ns, "start");
+}
+
+static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_TIMED_CALLBACK(genpd, int, save_state, dev,
+ save_state_latency_ns, "state save");
+}
+
+static int genpd_restore_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_TIMED_CALLBACK(genpd, int, restore_state, dev,
+ restore_state_latency_ns,
+ "state restore");
+}
+
+static bool genpd_sd_counter_dec(struct generic_pm_domain *genpd)
+{
+ bool ret = false;
+
+ if (!WARN_ON(atomic_read(&genpd->sd_count) == 0))
+ ret = !!atomic_dec_and_test(&genpd->sd_count);
+
+ return ret;
+}
+
+static void genpd_sd_counter_inc(struct generic_pm_domain *genpd)
+{
+ atomic_inc(&genpd->sd_count);
+ smp_mb__after_atomic_inc();
+}
+
+static void genpd_acquire_lock(struct generic_pm_domain *genpd)
+{
+ DEFINE_WAIT(wait);
+
+ mutex_lock(&genpd->lock);
+ /*
+ * Wait for the domain to transition into either the active,
+ * or the power off state.
+ */
+ for (;;) {
+ prepare_to_wait(&genpd->status_wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (genpd->status == GPD_STATE_ACTIVE
+ || genpd->status == GPD_STATE_POWER_OFF)
+ break;
+ mutex_unlock(&genpd->lock);
+
+ schedule();
+
+ mutex_lock(&genpd->lock);
+ }
+ finish_wait(&genpd->status_wait_queue, &wait);
+}
+
+static void genpd_release_lock(struct generic_pm_domain *genpd)
+{
+ mutex_unlock(&genpd->lock);
+}
+
+static void genpd_set_active(struct generic_pm_domain *genpd)
+{
+ if (genpd->resume_count == 0)
+ genpd->status = GPD_STATE_ACTIVE;
+}
+
+/**
+ * __pm_genpd_poweron - Restore power to a given PM domain and its masters.
+ * @genpd: PM domain to power up.
+ *
+ * Restore power to @genpd and all of its masters so that it is possible to
+ * resume a device belonging to it.
+ */
+int __pm_genpd_poweron(struct generic_pm_domain *genpd)
+ __releases(&genpd->lock) __acquires(&genpd->lock)
+{
+ struct gpd_link *link;
+ DEFINE_WAIT(wait);
+ int ret = 0;
+
+ /* If the domain's master is being waited for, we have to wait too. */
+ for (;;) {
+ prepare_to_wait(&genpd->status_wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (genpd->status != GPD_STATE_WAIT_MASTER)
+ break;
+ mutex_unlock(&genpd->lock);
+
+ schedule();
+
+ mutex_lock(&genpd->lock);
+ }
+ finish_wait(&genpd->status_wait_queue, &wait);
+
+ if (genpd->status == GPD_STATE_ACTIVE
+ || (genpd->prepared_count > 0 && genpd->suspend_power_off))
+ return 0;
+
+ if (genpd->status != GPD_STATE_POWER_OFF) {
+ genpd_set_active(genpd);
+ return 0;
+ }
+
+ /*
+ * The list is guaranteed not to change while the loop below is being
+ * executed, unless one of the masters' .power_on() callbacks fiddles
+ * with it.
+ */
+ list_for_each_entry(link, &genpd->slave_links, slave_node) {
+ genpd_sd_counter_inc(link->master);
+ genpd->status = GPD_STATE_WAIT_MASTER;
+
+ mutex_unlock(&genpd->lock);
+
+ ret = pm_genpd_poweron(link->master);
+
+ mutex_lock(&genpd->lock);
+
+ /*
+ * The "wait for parent" status is guaranteed not to change
+ * while the master is powering on.
+ */
+ genpd->status = GPD_STATE_POWER_OFF;
+ wake_up_all(&genpd->status_wait_queue);
+ if (ret) {
+ genpd_sd_counter_dec(link->master);
+ goto err;
+ }
+ }
+
+ if (genpd->power_on) {
+ ktime_t time_start = ktime_get();
+ s64 elapsed_ns;
+
+ ret = genpd->power_on(genpd);
+ if (ret)
+ goto err;
+
+ elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
+ if (elapsed_ns > genpd->power_on_latency_ns) {
+ genpd->power_on_latency_ns = elapsed_ns;
+ genpd->max_off_time_changed = true;
+ if (genpd->name)
+ pr_warning("%s: Power-on latency exceeded, "
+ "new value %lld ns\n", genpd->name,
+ elapsed_ns);
+ }
+ }
+
+ genpd_set_active(genpd);
+
+ return 0;
+
+ err:
+ list_for_each_entry_continue_reverse(link, &genpd->slave_links, slave_node)
+ genpd_sd_counter_dec(link->master);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_poweron - Restore power to a given PM domain and its masters.
+ * @genpd: PM domain to power up.
+ */
+int pm_genpd_poweron(struct generic_pm_domain *genpd)
+{
+ int ret;
+
+ mutex_lock(&genpd->lock);
+ ret = __pm_genpd_poweron(genpd);
+ mutex_unlock(&genpd->lock);
+ return ret;
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
+ unsigned long val, void *ptr)
+{
+ struct generic_pm_domain_data *gpd_data;
+ struct device *dev;
+
+ gpd_data = container_of(nb, struct generic_pm_domain_data, nb);
+
+ mutex_lock(&gpd_data->lock);
+ dev = gpd_data->base.dev;
+ if (!dev) {
+ mutex_unlock(&gpd_data->lock);
+ return NOTIFY_DONE;
+ }
+ mutex_unlock(&gpd_data->lock);
+
+ for (;;) {
+ struct generic_pm_domain *genpd;
+ struct pm_domain_data *pdd;
+
+ spin_lock_irq(&dev->power.lock);
+
+ pdd = dev->power.subsys_data ?
+ dev->power.subsys_data->domain_data : NULL;
+ if (pdd) {
+ to_gpd_data(pdd)->td.constraint_changed = true;
+ genpd = dev_to_genpd(dev);
+ } else {
+ genpd = ERR_PTR(-ENODATA);
+ }
+
+ spin_unlock_irq(&dev->power.lock);
+
+ if (!IS_ERR(genpd)) {
+ mutex_lock(&genpd->lock);
+ genpd->max_off_time_changed = true;
+ mutex_unlock(&genpd->lock);
+ }
+
+ dev = dev->parent;
+ if (!dev || dev->power.ignore_children)
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+/**
+ * __pm_genpd_save_device - Save the pre-suspend state of a device.
+ * @pdd: Domain data of the device to save the state of.
+ * @genpd: PM domain the device belongs to.
+ */
+static int __pm_genpd_save_device(struct pm_domain_data *pdd,
+ struct generic_pm_domain *genpd)
+ __releases(&genpd->lock) __acquires(&genpd->lock)
+{
+ struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
+ struct device *dev = pdd->dev;
+ int ret = 0;
+
+ if (gpd_data->need_restore)
+ return 0;
+
+ mutex_unlock(&genpd->lock);
+
+ genpd_start_dev(genpd, dev);
+ ret = genpd_save_dev(genpd, dev);
+ genpd_stop_dev(genpd, dev);
+
+ mutex_lock(&genpd->lock);
+
+ if (!ret)
+ gpd_data->need_restore = true;
+
+ return ret;
+}
+
+/**
+ * __pm_genpd_restore_device - Restore the pre-suspend state of a device.
+ * @pdd: Domain data of the device to restore the state of.
+ * @genpd: PM domain the device belongs to.
+ */
+static void __pm_genpd_restore_device(struct pm_domain_data *pdd,
+ struct generic_pm_domain *genpd)
+ __releases(&genpd->lock) __acquires(&genpd->lock)
+{
+ struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
+ struct device *dev = pdd->dev;
+
+ if (!gpd_data->need_restore)
+ return;
+
+ mutex_unlock(&genpd->lock);
+
+ genpd_start_dev(genpd, dev);
+ genpd_restore_dev(genpd, dev);
+ genpd_stop_dev(genpd, dev);
+
+ mutex_lock(&genpd->lock);
+
+ gpd_data->need_restore = false;
+}
+
+/**
+ * genpd_abort_poweroff - Check if a PM domain power off should be aborted.
+ * @genpd: PM domain to check.
+ *
+ * Return true if a PM domain's status changed to GPD_STATE_ACTIVE during
+ * a "power off" operation, which means that a "power on" has occured in the
+ * meantime, or if its resume_count field is different from zero, which means
+ * that one of its devices has been resumed in the meantime.
+ */
+static bool genpd_abort_poweroff(struct generic_pm_domain *genpd)
+{
+ return genpd->status == GPD_STATE_WAIT_MASTER
+ || genpd->status == GPD_STATE_ACTIVE || genpd->resume_count > 0;
+}
+
+/**
+ * genpd_queue_power_off_work - Queue up the execution of pm_genpd_poweroff().
+ * @genpd: PM domait to power off.
+ *
+ * Queue up the execution of pm_genpd_poweroff() unless it's already been done
+ * before.
+ */
+void genpd_queue_power_off_work(struct generic_pm_domain *genpd)
+{
+ if (!work_pending(&genpd->power_off_work))
+ queue_work(pm_wq, &genpd->power_off_work);
+}
+
+/**
+ * pm_genpd_poweroff - Remove power from a given PM domain.
+ * @genpd: PM domain to power down.
+ *
+ * If all of the @genpd's devices have been suspended and all of its subdomains
+ * have been powered down, run the runtime suspend callbacks provided by all of
+ * the @genpd's devices' drivers and remove power from @genpd.
+ */
+static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
+ __releases(&genpd->lock) __acquires(&genpd->lock)
+{
+ struct pm_domain_data *pdd;
+ struct gpd_link *link;
+ unsigned int not_suspended;
+ int ret = 0;
+
+ start:
+ /*
+ * Do not try to power off the domain in the following situations:
+ * (1) The domain is already in the "power off" state.
+ * (2) The domain is waiting for its master to power up.
+ * (3) One of the domain's devices is being resumed right now.
+ * (4) System suspend is in progress.
+ */
+ if (genpd->status == GPD_STATE_POWER_OFF
+ || genpd->status == GPD_STATE_WAIT_MASTER
+ || genpd->resume_count > 0 || genpd->prepared_count > 0)
+ return 0;
+
+ if (atomic_read(&genpd->sd_count) > 0)
+ return -EBUSY;
+
+ not_suspended = 0;
+ list_for_each_entry(pdd, &genpd->dev_list, list_node)
+ if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev)
+ || pdd->dev->power.irq_safe || to_gpd_data(pdd)->always_on))
+ not_suspended++;
+
+ if (not_suspended > genpd->in_progress)
+ return -EBUSY;
+
+ if (genpd->poweroff_task) {
+ /*
+ * Another instance of pm_genpd_poweroff() is executing
+ * callbacks, so tell it to start over and return.
+ */
+ genpd->status = GPD_STATE_REPEAT;
+ return 0;
+ }
+
+ if (genpd->gov && genpd->gov->power_down_ok) {
+ if (!genpd->gov->power_down_ok(&genpd->domain))
+ return -EAGAIN;
+ }
+
+ genpd->status = GPD_STATE_BUSY;
+ genpd->poweroff_task = current;
+
+ list_for_each_entry_reverse(pdd, &genpd->dev_list, list_node) {
+ ret = atomic_read(&genpd->sd_count) == 0 ?
+ __pm_genpd_save_device(pdd, genpd) : -EBUSY;
+
+ if (genpd_abort_poweroff(genpd))
+ goto out;
+
+ if (ret) {
+ genpd_set_active(genpd);
+ goto out;
+ }
+
+ if (genpd->status == GPD_STATE_REPEAT) {
+ genpd->poweroff_task = NULL;
+ goto start;
+ }
+ }
+
+ if (genpd->power_off) {
+ ktime_t time_start;
+ s64 elapsed_ns;
+
+ if (atomic_read(&genpd->sd_count) > 0) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ time_start = ktime_get();
+
+ /*
+ * If sd_count > 0 at this point, one of the subdomains hasn't
+ * managed to call pm_genpd_poweron() for the master yet after
+ * incrementing it. In that case pm_genpd_poweron() will wait
+ * for us to drop the lock, so we can call .power_off() and let
+ * the pm_genpd_poweron() restore power for us (this shouldn't
+ * happen very often).
+ */
+ ret = genpd->power_off(genpd);
+ if (ret == -EBUSY) {
+ genpd_set_active(genpd);
+ goto out;
+ }
+
+ elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
+ if (elapsed_ns > genpd->power_off_latency_ns) {
+ genpd->power_off_latency_ns = elapsed_ns;
+ genpd->max_off_time_changed = true;
+ if (genpd->name)
+ pr_warning("%s: Power-off latency exceeded, "
+ "new value %lld ns\n", genpd->name,
+ elapsed_ns);
+ }
+ }
+
+ genpd->status = GPD_STATE_POWER_OFF;
+
+ list_for_each_entry(link, &genpd->slave_links, slave_node) {
+ genpd_sd_counter_dec(link->master);
+ genpd_queue_power_off_work(link->master);
+ }
+
+ out:
+ genpd->poweroff_task = NULL;
+ wake_up_all(&genpd->status_wait_queue);
+ return ret;
+}
+
+/**
+ * genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0.
+ * @work: Work structure used for scheduling the execution of this function.
+ */
+static void genpd_power_off_work_fn(struct work_struct *work)
+{
+ struct generic_pm_domain *genpd;
+
+ genpd = container_of(work, struct generic_pm_domain, power_off_work);
+
+ genpd_acquire_lock(genpd);
+ pm_genpd_poweroff(genpd);
+ genpd_release_lock(genpd);
+}
+
+/**
+ * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Carry out a runtime suspend of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_runtime_suspend(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ bool (*stop_ok)(struct device *__dev);
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ might_sleep_if(!genpd->dev_irq_safe);
+
+ if (dev_gpd_data(dev)->always_on)
+ return -EBUSY;
+
+ stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL;
+ if (stop_ok && !stop_ok(dev))
+ return -EBUSY;
+
+ ret = genpd_stop_dev(genpd, dev);
+ if (ret)
+ return ret;
+
+ /*
+ * If power.irq_safe is set, this routine will be run with interrupts
+ * off, so it can't use mutexes.
+ */
+ if (dev->power.irq_safe)
+ return 0;
+
+ mutex_lock(&genpd->lock);
+ genpd->in_progress++;
+ pm_genpd_poweroff(genpd);
+ genpd->in_progress--;
+ mutex_unlock(&genpd->lock);
+
+ return 0;
+}
+
+/**
+ * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Carry out a runtime resume of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_runtime_resume(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ DEFINE_WAIT(wait);
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ might_sleep_if(!genpd->dev_irq_safe);
+
+ /* If power.irq_safe, the PM domain is never powered off. */
+ if (dev->power.irq_safe)
+ goto out;
+
+ mutex_lock(&genpd->lock);
+ ret = __pm_genpd_poweron(genpd);
+ if (ret) {
+ mutex_unlock(&genpd->lock);
+ return ret;
+ }
+ genpd->status = GPD_STATE_BUSY;
+ genpd->resume_count++;
+ for (;;) {
+ prepare_to_wait(&genpd->status_wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ /*
+ * If current is the powering off task, we have been called
+ * reentrantly from one of the device callbacks, so we should
+ * not wait.
+ */
+ if (!genpd->poweroff_task || genpd->poweroff_task == current)
+ break;
+ mutex_unlock(&genpd->lock);
+
+ schedule();
+
+ mutex_lock(&genpd->lock);
+ }
+ finish_wait(&genpd->status_wait_queue, &wait);
+ __pm_genpd_restore_device(dev->power.subsys_data->domain_data, genpd);
+ genpd->resume_count--;
+ genpd_set_active(genpd);
+ wake_up_all(&genpd->status_wait_queue);
+ mutex_unlock(&genpd->lock);
+
+ out:
+ genpd_start_dev(genpd, dev);
+
+ return 0;
+}
+
+/**
+ * pm_genpd_poweroff_unused - Power off all PM domains with no devices in use.
+ */
+void pm_genpd_poweroff_unused(void)
+{
+ struct generic_pm_domain *genpd;
+
+ mutex_lock(&gpd_list_lock);
+
+ list_for_each_entry(genpd, &gpd_list, gpd_list_node)
+ genpd_queue_power_off_work(genpd);
+
+ mutex_unlock(&gpd_list_lock);
+}
+
+#else
+
+static inline int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
+ unsigned long val, void *ptr)
+{
+ return NOTIFY_DONE;
+}
+
+static inline void genpd_power_off_work_fn(struct work_struct *work) {}
+
+#define pm_genpd_runtime_suspend NULL
+#define pm_genpd_runtime_resume NULL
+
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+
+static bool genpd_dev_active_wakeup(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, bool, active_wakeup, dev);
+}
+
+static int genpd_suspend_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, suspend, dev);
+}
+
+static int genpd_suspend_late(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, suspend_late, dev);
+}
+
+static int genpd_resume_early(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, resume_early, dev);
+}
+
+static int genpd_resume_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, resume, dev);
+}
+
+static int genpd_freeze_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, freeze, dev);
+}
+
+static int genpd_freeze_late(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, freeze_late, dev);
+}
+
+static int genpd_thaw_early(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, thaw_early, dev);
+}
+
+static int genpd_thaw_dev(struct generic_pm_domain *genpd, struct device *dev)
+{
+ return GENPD_DEV_CALLBACK(genpd, int, thaw, dev);
+}
+
+/**
+ * pm_genpd_sync_poweroff - Synchronously power off a PM domain and its masters.
+ * @genpd: PM domain to power off, if possible.
+ *
+ * Check if the given PM domain can be powered off (during system suspend or
+ * hibernation) and do that if so. Also, in that case propagate to its masters.
+ *
+ * This function is only called in "noirq" stages of system power transitions,
+ * so it need not acquire locks (all of the "noirq" callbacks are executed
+ * sequentially, so it is guaranteed that it will never run twice in parallel).
+ */
+static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd)
+{
+ struct gpd_link *link;
+
+ if (genpd->status == GPD_STATE_POWER_OFF)
+ return;
+
+ if (genpd->suspended_count != genpd->device_count
+ || atomic_read(&genpd->sd_count) > 0)
+ return;
+
+ if (genpd->power_off)
+ genpd->power_off(genpd);
+
+ genpd->status = GPD_STATE_POWER_OFF;
+
+ list_for_each_entry(link, &genpd->slave_links, slave_node) {
+ genpd_sd_counter_dec(link->master);
+ pm_genpd_sync_poweroff(link->master);
+ }
+}
+
+/**
+ * resume_needed - Check whether to resume a device before system suspend.
+ * @dev: Device to check.
+ * @genpd: PM domain the device belongs to.
+ *
+ * There are two cases in which a device that can wake up the system from sleep
+ * states should be resumed by pm_genpd_prepare(): (1) if the device is enabled
+ * to wake up the system and it has to remain active for this purpose while the
+ * system is in the sleep state and (2) if the device is not enabled to wake up
+ * the system from sleep states and it generally doesn't generate wakeup signals
+ * by itself (those signals are generated on its behalf by other parts of the
+ * system). In the latter case it may be necessary to reconfigure the device's
+ * wakeup settings during system suspend, because it may have been set up to
+ * signal remote wakeup from the system's working state as needed by runtime PM.
+ * Return 'true' in either of the above cases.
+ */
+static bool resume_needed(struct device *dev, struct generic_pm_domain *genpd)
+{
+ bool active_wakeup;
+
+ if (!device_can_wakeup(dev))
+ return false;
+
+ active_wakeup = genpd_dev_active_wakeup(genpd, dev);
+ return device_may_wakeup(dev) ? active_wakeup : !active_wakeup;
+}
+
+/**
+ * pm_genpd_prepare - Start power transition of a device in a PM domain.
+ * @dev: Device to start the transition of.
+ *
+ * Start a power transition of a device (during a system-wide power transition)
+ * under the assumption that its pm_domain field points to the domain member of
+ * an object of type struct generic_pm_domain representing a PM domain
+ * consisting of I/O devices.
+ */
+static int pm_genpd_prepare(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ /*
+ * If a wakeup request is pending for the device, it should be woken up
+ * at this point and a system wakeup event should be reported if it's
+ * set up to wake up the system from sleep states.
+ */
+ pm_runtime_get_noresume(dev);
+ if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+ pm_wakeup_event(dev, 0);
+
+ if (pm_wakeup_pending()) {
+ pm_runtime_put_sync(dev);
+ return -EBUSY;
+ }
+
+ if (resume_needed(dev, genpd))
+ pm_runtime_resume(dev);
+
+ genpd_acquire_lock(genpd);
+
+ if (genpd->prepared_count++ == 0) {
+ genpd->suspended_count = 0;
+ genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF;
+ }
+
+ genpd_release_lock(genpd);
+
+ if (genpd->suspend_power_off) {
+ pm_runtime_put_noidle(dev);
+ return 0;
+ }
+
+ /*
+ * The PM domain must be in the GPD_STATE_ACTIVE state at this point,
+ * so pm_genpd_poweron() will return immediately, but if the device
+ * is suspended (e.g. it's been stopped by genpd_stop_dev()), we need
+ * to make it operational.
+ */
+ pm_runtime_resume(dev);
+ __pm_runtime_disable(dev, false);
+
+ ret = pm_generic_prepare(dev);
+ if (ret) {
+ mutex_lock(&genpd->lock);
+
+ if (--genpd->prepared_count == 0)
+ genpd->suspend_power_off = false;
+
+ mutex_unlock(&genpd->lock);
+ pm_runtime_enable(dev);
+ }
+
+ pm_runtime_put_sync(dev);
+ return ret;
+}
+
+/**
+ * pm_genpd_suspend - Suspend a device belonging to an I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Suspend a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_suspend(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_suspend_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_suspend_late - Late suspend of a device from an I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Carry out a late suspend of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_suspend_late(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_suspend_late(genpd, dev);
+}
+
+/**
+ * pm_genpd_suspend_noirq - Completion of suspend of device in an I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Stop the device and remove power from the domain if all devices in it have
+ * been stopped.
+ */
+static int pm_genpd_suspend_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->suspend_power_off || dev_gpd_data(dev)->always_on
+ || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev)))
+ return 0;
+
+ genpd_stop_dev(genpd, dev);
+
+ /*
+ * Since all of the "noirq" callbacks are executed sequentially, it is
+ * guaranteed that this function will never run twice in parallel for
+ * the same PM domain, so it is not necessary to use locking here.
+ */
+ genpd->suspended_count++;
+ pm_genpd_sync_poweroff(genpd);
+
+ return 0;
+}
+
+/**
+ * pm_genpd_resume_noirq - Start of resume of device in an I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Restore power to the device's PM domain, if necessary, and start the device.
+ */
+static int pm_genpd_resume_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->suspend_power_off || dev_gpd_data(dev)->always_on
+ || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev)))
+ return 0;
+
+ /*
+ * Since all of the "noirq" callbacks are executed sequentially, it is
+ * guaranteed that this function will never run twice in parallel for
+ * the same PM domain, so it is not necessary to use locking here.
+ */
+ pm_genpd_poweron(genpd);
+ genpd->suspended_count--;
+
+ return genpd_start_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_resume_early - Early resume of a device in an I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Carry out an early resume of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_resume_early(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_resume_early(genpd, dev);
+}
+
+/**
+ * pm_genpd_resume - Resume of device in an I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Resume a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static int pm_genpd_resume(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_resume_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_freeze - Freezing a device in an I/O PM domain.
+ * @dev: Device to freeze.
+ *
+ * Freeze a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static int pm_genpd_freeze(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_freeze_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_freeze_late - Late freeze of a device in an I/O PM domain.
+ * @dev: Device to freeze.
+ *
+ * Carry out a late freeze of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_freeze_late(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_freeze_late(genpd, dev);
+}
+
+/**
+ * pm_genpd_freeze_noirq - Completion of freezing a device in an I/O PM domain.
+ * @dev: Device to freeze.
+ *
+ * Carry out a late freeze of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_freeze_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off || dev_gpd_data(dev)->always_on ?
+ 0 : genpd_stop_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_thaw_noirq - Early thaw of device in an I/O PM domain.
+ * @dev: Device to thaw.
+ *
+ * Start the device, unless power has been removed from the domain already
+ * before the system transition.
+ */
+static int pm_genpd_thaw_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off || dev_gpd_data(dev)->always_on ?
+ 0 : genpd_start_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_thaw_early - Early thaw of device in an I/O PM domain.
+ * @dev: Device to thaw.
+ *
+ * Carry out an early thaw of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_thaw_early(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_thaw_early(genpd, dev);
+}
+
+/**
+ * pm_genpd_thaw - Thaw a device belonging to an I/O power domain.
+ * @dev: Device to thaw.
+ *
+ * Thaw a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static int pm_genpd_thaw(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : genpd_thaw_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_restore_noirq - Start of restore of device in an I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Make sure the domain will be in the same power state as before the
+ * hibernation the system is resuming from and start the device if necessary.
+ */
+static int pm_genpd_restore_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ /*
+ * Since all of the "noirq" callbacks are executed sequentially, it is
+ * guaranteed that this function will never run twice in parallel for
+ * the same PM domain, so it is not necessary to use locking here.
+ *
+ * At this point suspended_count == 0 means we are being run for the
+ * first time for the given domain in the present cycle.
+ */
+ if (genpd->suspended_count++ == 0) {
+ /*
+ * The boot kernel might put the domain into arbitrary state,
+ * so make it appear as powered off to pm_genpd_poweron(), so
+ * that it tries to power it on in case it was really off.
+ */
+ genpd->status = GPD_STATE_POWER_OFF;
+ if (genpd->suspend_power_off) {
+ /*
+ * If the domain was off before the hibernation, make
+ * sure it will be off going forward.
+ */
+ if (genpd->power_off)
+ genpd->power_off(genpd);
+
+ return 0;
+ }
+ }
+
+ if (genpd->suspend_power_off)
+ return 0;
+
+ pm_genpd_poweron(genpd);
+
+ return dev_gpd_data(dev)->always_on ? 0 : genpd_start_dev(genpd, dev);
+}
+
+/**
+ * pm_genpd_complete - Complete power transition of a device in a power domain.
+ * @dev: Device to complete the transition of.
+ *
+ * Complete a power transition of a device (during a system-wide power
+ * transition) under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static void pm_genpd_complete(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ bool run_complete;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return;
+
+ mutex_lock(&genpd->lock);
+
+ run_complete = !genpd->suspend_power_off;
+ if (--genpd->prepared_count == 0)
+ genpd->suspend_power_off = false;
+
+ mutex_unlock(&genpd->lock);
+
+ if (run_complete) {
+ pm_generic_complete(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_idle(dev);
+ }
+}
+
+#else
+
+#define pm_genpd_prepare NULL
+#define pm_genpd_suspend NULL
+#define pm_genpd_suspend_late NULL
+#define pm_genpd_suspend_noirq NULL
+#define pm_genpd_resume_early NULL
+#define pm_genpd_resume_noirq NULL
+#define pm_genpd_resume NULL
+#define pm_genpd_freeze NULL
+#define pm_genpd_freeze_late NULL
+#define pm_genpd_freeze_noirq NULL
+#define pm_genpd_thaw_early NULL
+#define pm_genpd_thaw_noirq NULL
+#define pm_genpd_thaw NULL
+#define pm_genpd_restore_noirq NULL
+#define pm_genpd_complete NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * __pm_genpd_add_device - Add a device to an I/O PM domain.
+ * @genpd: PM domain to add the device to.
+ * @dev: Device to be added.
+ * @td: Set of PM QoS timing parameters to attach to the device.
+ */
+int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
+ struct gpd_timing_data *td)
+{
+ struct generic_pm_domain_data *gpd_data;
+ struct pm_domain_data *pdd;
+ int ret = 0;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev))
+ return -EINVAL;
+
+ gpd_data = kzalloc(sizeof(*gpd_data), GFP_KERNEL);
+ if (!gpd_data)
+ return -ENOMEM;
+
+ mutex_init(&gpd_data->lock);
+ gpd_data->nb.notifier_call = genpd_dev_pm_qos_notifier;
+ dev_pm_qos_add_notifier(dev, &gpd_data->nb);
+
+ genpd_acquire_lock(genpd);
+
+ if (genpd->prepared_count > 0) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ list_for_each_entry(pdd, &genpd->dev_list, list_node)
+ if (pdd->dev == dev) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ genpd->device_count++;
+ genpd->max_off_time_changed = true;
+
+ dev_pm_get_subsys_data(dev);
+
+ mutex_lock(&gpd_data->lock);
+ spin_lock_irq(&dev->power.lock);
+ dev->pm_domain = &genpd->domain;
+ dev->power.subsys_data->domain_data = &gpd_data->base;
+ gpd_data->base.dev = dev;
+ list_add_tail(&gpd_data->base.list_node, &genpd->dev_list);
+ gpd_data->need_restore = genpd->status == GPD_STATE_POWER_OFF;
+ if (td)
+ gpd_data->td = *td;
+
+ gpd_data->td.constraint_changed = true;
+ gpd_data->td.effective_constraint_ns = -1;
+ spin_unlock_irq(&dev->power.lock);
+ mutex_unlock(&gpd_data->lock);
+
+ genpd_release_lock(genpd);
+
+ return 0;
+
+ out:
+ genpd_release_lock(genpd);
+
+ dev_pm_qos_remove_notifier(dev, &gpd_data->nb);
+ kfree(gpd_data);
+ return ret;
+}
+
+/**
+ * __pm_genpd_of_add_device - Add a device to an I/O PM domain.
+ * @genpd_node: Device tree node pointer representing a PM domain to which the
+ * the device is added to.
+ * @dev: Device to be added.
+ * @td: Set of PM QoS timing parameters to attach to the device.
+ */
+int __pm_genpd_of_add_device(struct device_node *genpd_node, struct device *dev,
+ struct gpd_timing_data *td)
+{
+ struct generic_pm_domain *genpd = NULL, *gpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (IS_ERR_OR_NULL(genpd_node) || IS_ERR_OR_NULL(dev))
+ return -EINVAL;
+
+ mutex_lock(&gpd_list_lock);
+ list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
+ if (gpd->of_node == genpd_node) {
+ genpd = gpd;
+ break;
+ }
+ }
+ mutex_unlock(&gpd_list_lock);
+
+ if (!genpd)
+ return -EINVAL;
+
+ return __pm_genpd_add_device(genpd, dev, td);
+}
+
+/**
+ * pm_genpd_remove_device - Remove a device from an I/O PM domain.
+ * @genpd: PM domain to remove the device from.
+ * @dev: Device to be removed.
+ */
+int pm_genpd_remove_device(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ struct generic_pm_domain_data *gpd_data;
+ struct pm_domain_data *pdd;
+ int ret = 0;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev)
+ || IS_ERR_OR_NULL(dev->pm_domain)
+ || pd_to_genpd(dev->pm_domain) != genpd)
+ return -EINVAL;
+
+ genpd_acquire_lock(genpd);
+
+ if (genpd->prepared_count > 0) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ genpd->device_count--;
+ genpd->max_off_time_changed = true;
+
+ spin_lock_irq(&dev->power.lock);
+ dev->pm_domain = NULL;
+ pdd = dev->power.subsys_data->domain_data;
+ list_del_init(&pdd->list_node);
+ dev->power.subsys_data->domain_data = NULL;
+ spin_unlock_irq(&dev->power.lock);
+
+ gpd_data = to_gpd_data(pdd);
+ mutex_lock(&gpd_data->lock);
+ pdd->dev = NULL;
+ mutex_unlock(&gpd_data->lock);
+
+ genpd_release_lock(genpd);
+
+ dev_pm_qos_remove_notifier(dev, &gpd_data->nb);
+ kfree(gpd_data);
+ dev_pm_put_subsys_data(dev);
+ return 0;
+
+ out:
+ genpd_release_lock(genpd);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_dev_always_on - Set/unset the "always on" flag for a given device.
+ * @dev: Device to set/unset the flag for.
+ * @val: The new value of the device's "always on" flag.
+ */
+void pm_genpd_dev_always_on(struct device *dev, bool val)
+{
+ struct pm_subsys_data *psd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ psd = dev_to_psd(dev);
+ if (psd && psd->domain_data)
+ to_gpd_data(psd->domain_data)->always_on = val;
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_genpd_dev_always_on);
+
+/**
+ * pm_genpd_dev_need_restore - Set/unset the device's "need restore" flag.
+ * @dev: Device to set/unset the flag for.
+ * @val: The new value of the device's "need restore" flag.
+ */
+void pm_genpd_dev_need_restore(struct device *dev, bool val)
+{
+ struct pm_subsys_data *psd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ psd = dev_to_psd(dev);
+ if (psd && psd->domain_data)
+ to_gpd_data(psd->domain_data)->need_restore = val;
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_genpd_dev_need_restore);
+
+/**
+ * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain.
+ * @genpd: Master PM domain to add the subdomain to.
+ * @subdomain: Subdomain to be added.
+ */
+int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *subdomain)
+{
+ struct gpd_link *link;
+ int ret = 0;
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain))
+ return -EINVAL;
+
+ start:
+ genpd_acquire_lock(genpd);
+ mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING);
+
+ if (subdomain->status != GPD_STATE_POWER_OFF
+ && subdomain->status != GPD_STATE_ACTIVE) {
+ mutex_unlock(&subdomain->lock);
+ genpd_release_lock(genpd);
+ goto start;
+ }
+
+ if (genpd->status == GPD_STATE_POWER_OFF
+ && subdomain->status != GPD_STATE_POWER_OFF) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ list_for_each_entry(link, &genpd->master_links, master_node) {
+ if (link->slave == subdomain && link->master == genpd) {
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+
+ link = kzalloc(sizeof(*link), GFP_KERNEL);
+ if (!link) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ link->master = genpd;
+ list_add_tail(&link->master_node, &genpd->master_links);
+ link->slave = subdomain;
+ list_add_tail(&link->slave_node, &subdomain->slave_links);
+ if (subdomain->status != GPD_STATE_POWER_OFF)
+ genpd_sd_counter_inc(genpd);
+
+ out:
+ mutex_unlock(&subdomain->lock);
+ genpd_release_lock(genpd);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain.
+ * @genpd: Master PM domain to remove the subdomain from.
+ * @subdomain: Subdomain to be removed.
+ */
+int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *subdomain)
+{
+ struct gpd_link *link;
+ int ret = -EINVAL;
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain))
+ return -EINVAL;
+
+ start:
+ genpd_acquire_lock(genpd);
+
+ list_for_each_entry(link, &genpd->master_links, master_node) {
+ if (link->slave != subdomain)
+ continue;
+
+ mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING);
+
+ if (subdomain->status != GPD_STATE_POWER_OFF
+ && subdomain->status != GPD_STATE_ACTIVE) {
+ mutex_unlock(&subdomain->lock);
+ genpd_release_lock(genpd);
+ goto start;
+ }
+
+ list_del(&link->master_node);
+ list_del(&link->slave_node);
+ kfree(link);
+ if (subdomain->status != GPD_STATE_POWER_OFF)
+ genpd_sd_counter_dec(genpd);
+
+ mutex_unlock(&subdomain->lock);
+
+ ret = 0;
+ break;
+ }
+
+ genpd_release_lock(genpd);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_add_callbacks - Add PM domain callbacks to a given device.
+ * @dev: Device to add the callbacks to.
+ * @ops: Set of callbacks to add.
+ * @td: Timing data to add to the device along with the callbacks (optional).
+ */
+int pm_genpd_add_callbacks(struct device *dev, struct gpd_dev_ops *ops,
+ struct gpd_timing_data *td)
+{
+ struct pm_domain_data *pdd;
+ int ret = 0;
+
+ if (!(dev && dev->power.subsys_data && ops))
+ return -EINVAL;
+
+ pm_runtime_disable(dev);
+ device_pm_lock();
+
+ pdd = dev->power.subsys_data->domain_data;
+ if (pdd) {
+ struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
+
+ gpd_data->ops = *ops;
+ if (td)
+ gpd_data->td = *td;
+ } else {
+ ret = -EINVAL;
+ }
+
+ device_pm_unlock();
+ pm_runtime_enable(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pm_genpd_add_callbacks);
+
+/**
+ * __pm_genpd_remove_callbacks - Remove PM domain callbacks from a given device.
+ * @dev: Device to remove the callbacks from.
+ * @clear_td: If set, clear the device's timing data too.
+ */
+int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td)
+{
+ struct pm_domain_data *pdd;
+ int ret = 0;
+
+ if (!(dev && dev->power.subsys_data))
+ return -EINVAL;
+
+ pm_runtime_disable(dev);
+ device_pm_lock();
+
+ pdd = dev->power.subsys_data->domain_data;
+ if (pdd) {
+ struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
+
+ gpd_data->ops = (struct gpd_dev_ops){ 0 };
+ if (clear_td)
+ gpd_data->td = (struct gpd_timing_data){ 0 };
+ } else {
+ ret = -EINVAL;
+ }
+
+ device_pm_unlock();
+ pm_runtime_enable(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(__pm_genpd_remove_callbacks);
+
+/* Default device callbacks for generic PM domains. */
+
+/**
+ * pm_genpd_default_save_state - Default "save device state" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_save_state(struct device *dev)
+{
+ int (*cb)(struct device *__dev);
+ struct device_driver *drv = dev->driver;
+
+ cb = dev_gpd_data(dev)->ops.save_state;
+ if (cb)
+ return cb(dev);
+
+ if (drv && drv->pm && drv->pm->runtime_suspend)
+ return drv->pm->runtime_suspend(dev);
+
+ return 0;
+}
+
+/**
+ * pm_genpd_default_restore_state - Default PM domians "restore device state".
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_restore_state(struct device *dev)
+{
+ int (*cb)(struct device *__dev);
+ struct device_driver *drv = dev->driver;
+
+ cb = dev_gpd_data(dev)->ops.restore_state;
+ if (cb)
+ return cb(dev);
+
+ if (drv && drv->pm && drv->pm->runtime_resume)
+ return drv->pm->runtime_resume(dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+/**
+ * pm_genpd_default_suspend - Default "device suspend" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_suspend(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.suspend;
+
+ return cb ? cb(dev) : pm_generic_suspend(dev);
+}
+
+/**
+ * pm_genpd_default_suspend_late - Default "late device suspend" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_suspend_late(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.suspend_late;
+
+ return cb ? cb(dev) : pm_generic_suspend_late(dev);
+}
+
+/**
+ * pm_genpd_default_resume_early - Default "early device resume" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_resume_early(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.resume_early;
+
+ return cb ? cb(dev) : pm_generic_resume_early(dev);
+}
+
+/**
+ * pm_genpd_default_resume - Default "device resume" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_resume(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.resume;
+
+ return cb ? cb(dev) : pm_generic_resume(dev);
+}
+
+/**
+ * pm_genpd_default_freeze - Default "device freeze" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_freeze(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.freeze;
+
+ return cb ? cb(dev) : pm_generic_freeze(dev);
+}
+
+/**
+ * pm_genpd_default_freeze_late - Default "late device freeze" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_freeze_late(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.freeze_late;
+
+ return cb ? cb(dev) : pm_generic_freeze_late(dev);
+}
+
+/**
+ * pm_genpd_default_thaw_early - Default "early device thaw" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_thaw_early(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.thaw_early;
+
+ return cb ? cb(dev) : pm_generic_thaw_early(dev);
+}
+
+/**
+ * pm_genpd_default_thaw - Default "device thaw" for PM domians.
+ * @dev: Device to handle.
+ */
+static int pm_genpd_default_thaw(struct device *dev)
+{
+ int (*cb)(struct device *__dev) = dev_gpd_data(dev)->ops.thaw;
+
+ return cb ? cb(dev) : pm_generic_thaw(dev);
+}
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define pm_genpd_default_suspend NULL
+#define pm_genpd_default_suspend_late NULL
+#define pm_genpd_default_resume_early NULL
+#define pm_genpd_default_resume NULL
+#define pm_genpd_default_freeze NULL
+#define pm_genpd_default_freeze_late NULL
+#define pm_genpd_default_thaw_early NULL
+#define pm_genpd_default_thaw NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
+/**
+ * pm_genpd_init - Initialize a generic I/O PM domain object.
+ * @genpd: PM domain object to initialize.
+ * @gov: PM domain governor to associate with the domain (may be NULL).
+ * @is_off: Initial value of the domain's power_is_off field.
+ */
+void pm_genpd_init(struct generic_pm_domain *genpd,
+ struct dev_power_governor *gov, bool is_off)
+{
+ if (IS_ERR_OR_NULL(genpd))
+ return;
+
+ INIT_LIST_HEAD(&genpd->master_links);
+ INIT_LIST_HEAD(&genpd->slave_links);
+ INIT_LIST_HEAD(&genpd->dev_list);
+ mutex_init(&genpd->lock);
+ genpd->gov = gov;
+ INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn);
+ genpd->in_progress = 0;
+ atomic_set(&genpd->sd_count, 0);
+ genpd->status = is_off ? GPD_STATE_POWER_OFF : GPD_STATE_ACTIVE;
+ init_waitqueue_head(&genpd->status_wait_queue);
+ genpd->poweroff_task = NULL;
+ genpd->resume_count = 0;
+ genpd->device_count = 0;
+ genpd->max_off_time_ns = -1;
+ genpd->max_off_time_changed = true;
+ genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend;
+ genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume;
+ genpd->domain.ops.runtime_idle = pm_generic_runtime_idle;
+ genpd->domain.ops.prepare = pm_genpd_prepare;
+ genpd->domain.ops.suspend = pm_genpd_suspend;
+ genpd->domain.ops.suspend_late = pm_genpd_suspend_late;
+ genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq;
+ genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq;
+ genpd->domain.ops.resume_early = pm_genpd_resume_early;
+ genpd->domain.ops.resume = pm_genpd_resume;
+ genpd->domain.ops.freeze = pm_genpd_freeze;
+ genpd->domain.ops.freeze_late = pm_genpd_freeze_late;
+ genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq;
+ genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq;
+ genpd->domain.ops.thaw_early = pm_genpd_thaw_early;
+ genpd->domain.ops.thaw = pm_genpd_thaw;
+ genpd->domain.ops.poweroff = pm_genpd_suspend;
+ genpd->domain.ops.poweroff_late = pm_genpd_suspend_late;
+ genpd->domain.ops.poweroff_noirq = pm_genpd_suspend_noirq;
+ genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq;
+ genpd->domain.ops.restore_early = pm_genpd_resume_early;
+ genpd->domain.ops.restore = pm_genpd_resume;
+ genpd->domain.ops.complete = pm_genpd_complete;
+ genpd->dev_ops.save_state = pm_genpd_default_save_state;
+ genpd->dev_ops.restore_state = pm_genpd_default_restore_state;
+ genpd->dev_ops.suspend = pm_genpd_default_suspend;
+ genpd->dev_ops.suspend_late = pm_genpd_default_suspend_late;
+ genpd->dev_ops.resume_early = pm_genpd_default_resume_early;
+ genpd->dev_ops.resume = pm_genpd_default_resume;
+ genpd->dev_ops.freeze = pm_genpd_default_freeze;
+ genpd->dev_ops.freeze_late = pm_genpd_default_freeze_late;
+ genpd->dev_ops.thaw_early = pm_genpd_default_thaw_early;
+ genpd->dev_ops.thaw = pm_genpd_default_thaw;
+ mutex_lock(&gpd_list_lock);
+ list_add(&genpd->gpd_list_node, &gpd_list);
+ mutex_unlock(&gpd_list_lock);
+}
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/domain_governor.c b/ap/os/linux/linux-3.4.x/drivers/base/power/domain_governor.c
new file mode 100644
index 0000000..28dee30
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/domain_governor.c
@@ -0,0 +1,254 @@
+/*
+ * drivers/base/power/domain_governor.c - Governors for device PM domains.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_qos.h>
+#include <linux/hrtimer.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int dev_update_qos_constraint(struct device *dev, void *data)
+{
+ s64 *constraint_ns_p = data;
+ s32 constraint_ns = -1;
+
+ if (dev->power.subsys_data && dev->power.subsys_data->domain_data)
+ constraint_ns = dev_gpd_data(dev)->td.effective_constraint_ns;
+
+ if (constraint_ns < 0) {
+ constraint_ns = dev_pm_qos_read_value(dev);
+ constraint_ns *= NSEC_PER_USEC;
+ }
+ if (constraint_ns == 0)
+ return 0;
+
+ /*
+ * constraint_ns cannot be negative here, because the device has been
+ * suspended.
+ */
+ if (constraint_ns < *constraint_ns_p || *constraint_ns_p == 0)
+ *constraint_ns_p = constraint_ns;
+
+ return 0;
+}
+
+/**
+ * default_stop_ok - Default PM domain governor routine for stopping devices.
+ * @dev: Device to check.
+ */
+bool default_stop_ok(struct device *dev)
+{
+ struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
+ unsigned long flags;
+ s64 constraint_ns;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (!td->constraint_changed) {
+ bool ret = td->cached_stop_ok;
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ return ret;
+ }
+ td->constraint_changed = false;
+ td->cached_stop_ok = false;
+ td->effective_constraint_ns = -1;
+ constraint_ns = __dev_pm_qos_read_value(dev);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ if (constraint_ns < 0)
+ return false;
+
+ constraint_ns *= NSEC_PER_USEC;
+ /*
+ * We can walk the children without any additional locking, because
+ * they all have been suspended at this point and their
+ * effective_constraint_ns fields won't be modified in parallel with us.
+ */
+ if (!dev->power.ignore_children)
+ device_for_each_child(dev, &constraint_ns,
+ dev_update_qos_constraint);
+
+ if (constraint_ns > 0) {
+ constraint_ns -= td->start_latency_ns;
+ if (constraint_ns == 0)
+ return false;
+ }
+ td->effective_constraint_ns = constraint_ns;
+ td->cached_stop_ok = constraint_ns > td->stop_latency_ns ||
+ constraint_ns == 0;
+ /*
+ * The children have been suspended already, so we don't need to take
+ * their stop latencies into account here.
+ */
+ return td->cached_stop_ok;
+}
+
+/**
+ * default_power_down_ok - Default generic PM domain power off governor routine.
+ * @pd: PM domain to check.
+ *
+ * This routine must be executed under the PM domain's lock.
+ */
+static bool default_power_down_ok(struct dev_pm_domain *pd)
+{
+ struct generic_pm_domain *genpd = pd_to_genpd(pd);
+ struct gpd_link *link;
+ struct pm_domain_data *pdd;
+ s64 min_off_time_ns;
+ s64 off_on_time_ns;
+
+ if (genpd->max_off_time_changed) {
+ struct gpd_link *link;
+
+ /*
+ * We have to invalidate the cached results for the masters, so
+ * use the observation that default_power_down_ok() is not
+ * going to be called for any master until this instance
+ * returns.
+ */
+ list_for_each_entry(link, &genpd->slave_links, slave_node)
+ link->master->max_off_time_changed = true;
+
+ genpd->max_off_time_changed = false;
+ genpd->cached_power_down_ok = false;
+ genpd->max_off_time_ns = -1;
+ } else {
+ return genpd->cached_power_down_ok;
+ }
+
+ off_on_time_ns = genpd->power_off_latency_ns +
+ genpd->power_on_latency_ns;
+ /*
+ * It doesn't make sense to remove power from the domain if saving
+ * the state of all devices in it and the power off/power on operations
+ * take too much time.
+ *
+ * All devices in this domain have been stopped already at this point.
+ */
+ list_for_each_entry(pdd, &genpd->dev_list, list_node) {
+ if (pdd->dev->driver)
+ off_on_time_ns +=
+ to_gpd_data(pdd)->td.save_state_latency_ns;
+ }
+
+ min_off_time_ns = -1;
+ /*
+ * Check if subdomains can be off for enough time.
+ *
+ * All subdomains have been powered off already at this point.
+ */
+ list_for_each_entry(link, &genpd->master_links, master_node) {
+ struct generic_pm_domain *sd = link->slave;
+ s64 sd_max_off_ns = sd->max_off_time_ns;
+
+ if (sd_max_off_ns < 0)
+ continue;
+
+ /*
+ * Check if the subdomain is allowed to be off long enough for
+ * the current domain to turn off and on (that's how much time
+ * it will have to wait worst case).
+ */
+ if (sd_max_off_ns <= off_on_time_ns)
+ return false;
+
+ if (min_off_time_ns > sd_max_off_ns || min_off_time_ns < 0)
+ min_off_time_ns = sd_max_off_ns;
+ }
+
+ /*
+ * Check if the devices in the domain can be off enough time.
+ */
+ list_for_each_entry(pdd, &genpd->dev_list, list_node) {
+ struct gpd_timing_data *td;
+ s64 constraint_ns;
+
+ if (!pdd->dev->driver)
+ continue;
+
+ /*
+ * Check if the device is allowed to be off long enough for the
+ * domain to turn off and on (that's how much time it will
+ * have to wait worst case).
+ */
+ td = &to_gpd_data(pdd)->td;
+ constraint_ns = td->effective_constraint_ns;
+ /* default_stop_ok() need not be called before us. */
+ if (constraint_ns < 0) {
+ constraint_ns = dev_pm_qos_read_value(pdd->dev);
+ constraint_ns *= NSEC_PER_USEC;
+ }
+ if (constraint_ns == 0)
+ continue;
+
+ /*
+ * constraint_ns cannot be negative here, because the device has
+ * been suspended.
+ */
+ constraint_ns -= td->restore_state_latency_ns;
+ if (constraint_ns <= off_on_time_ns)
+ return false;
+
+ if (min_off_time_ns > constraint_ns || min_off_time_ns < 0)
+ min_off_time_ns = constraint_ns;
+ }
+
+ genpd->cached_power_down_ok = true;
+
+ /*
+ * If the computed minimum device off time is negative, there are no
+ * latency constraints, so the domain can spend arbitrary time in the
+ * "off" state.
+ */
+ if (min_off_time_ns < 0)
+ return true;
+
+ /*
+ * The difference between the computed minimum subdomain or device off
+ * time and the time needed to turn the domain on is the maximum
+ * theoretical time this domain can spend in the "off" state.
+ */
+ genpd->max_off_time_ns = min_off_time_ns - genpd->power_on_latency_ns;
+ return true;
+}
+
+static bool always_on_power_down_ok(struct dev_pm_domain *domain)
+{
+ return false;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+bool default_stop_ok(struct device *dev)
+{
+ return false;
+}
+
+#define default_power_down_ok NULL
+#define always_on_power_down_ok NULL
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+struct dev_power_governor simple_qos_governor = {
+ .stop_ok = default_stop_ok,
+ .power_down_ok = default_power_down_ok,
+};
+
+/**
+ * pm_genpd_gov_always_on - A governor implementing an always-on policy
+ */
+struct dev_power_governor pm_domain_always_on_gov = {
+ .power_down_ok = always_on_power_down_ok,
+ .stop_ok = default_stop_ok,
+};
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/generic_ops.c b/ap/os/linux/linux-3.4.x/drivers/base/power/generic_ops.c
new file mode 100644
index 0000000..d03d290
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/generic_ops.c
@@ -0,0 +1,329 @@
+/*
+ * drivers/base/power/generic_ops.c - Generic PM callbacks for subsystems
+ *
+ * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/export.h>
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * pm_generic_runtime_idle - Generic runtime idle callback for subsystems.
+ * @dev: Device to handle.
+ *
+ * If PM operations are defined for the @dev's driver and they include
+ * ->runtime_idle(), execute it and return its error code, if nonzero.
+ * Otherwise, execute pm_runtime_suspend() for the device and return 0.
+ */
+int pm_generic_runtime_idle(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ if (pm && pm->runtime_idle) {
+ int ret = pm->runtime_idle(dev);
+ if (ret)
+ return ret;
+ }
+
+ pm_runtime_suspend(dev);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_runtime_idle);
+
+/**
+ * pm_generic_runtime_suspend - Generic runtime suspend callback for subsystems.
+ * @dev: Device to suspend.
+ *
+ * If PM operations are defined for the @dev's driver and they include
+ * ->runtime_suspend(), execute it and return its error code. Otherwise,
+ * return 0.
+ */
+int pm_generic_runtime_suspend(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ int ret;
+
+ ret = pm && pm->runtime_suspend ? pm->runtime_suspend(dev) : 0;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pm_generic_runtime_suspend);
+
+/**
+ * pm_generic_runtime_resume - Generic runtime resume callback for subsystems.
+ * @dev: Device to resume.
+ *
+ * If PM operations are defined for the @dev's driver and they include
+ * ->runtime_resume(), execute it and return its error code. Otherwise,
+ * return 0.
+ */
+int pm_generic_runtime_resume(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ int ret;
+
+ ret = pm && pm->runtime_resume ? pm->runtime_resume(dev) : 0;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pm_generic_runtime_resume);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * pm_generic_prepare - Generic routine preparing a device for power transition.
+ * @dev: Device to prepare.
+ *
+ * Prepare a device for a system-wide power transition.
+ */
+int pm_generic_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ ret = drv->pm->prepare(dev);
+
+ return ret;
+}
+
+/**
+ * pm_generic_suspend_noirq - Generic suspend_noirq callback for subsystems.
+ * @dev: Device to suspend.
+ */
+int pm_generic_suspend_noirq(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->suspend_noirq ? pm->suspend_noirq(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_suspend_noirq);
+
+/**
+ * pm_generic_suspend_late - Generic suspend_late callback for subsystems.
+ * @dev: Device to suspend.
+ */
+int pm_generic_suspend_late(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->suspend_late ? pm->suspend_late(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_suspend_late);
+
+/**
+ * pm_generic_suspend - Generic suspend callback for subsystems.
+ * @dev: Device to suspend.
+ */
+int pm_generic_suspend(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->suspend ? pm->suspend(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_suspend);
+
+/**
+ * pm_generic_freeze_noirq - Generic freeze_noirq callback for subsystems.
+ * @dev: Device to freeze.
+ */
+int pm_generic_freeze_noirq(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->freeze_noirq ? pm->freeze_noirq(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_freeze_noirq);
+
+/**
+ * pm_generic_freeze_late - Generic freeze_late callback for subsystems.
+ * @dev: Device to freeze.
+ */
+int pm_generic_freeze_late(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->freeze_late ? pm->freeze_late(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_freeze_late);
+
+/**
+ * pm_generic_freeze - Generic freeze callback for subsystems.
+ * @dev: Device to freeze.
+ */
+int pm_generic_freeze(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->freeze ? pm->freeze(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_freeze);
+
+/**
+ * pm_generic_poweroff_noirq - Generic poweroff_noirq callback for subsystems.
+ * @dev: Device to handle.
+ */
+int pm_generic_poweroff_noirq(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->poweroff_noirq ? pm->poweroff_noirq(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_poweroff_noirq);
+
+/**
+ * pm_generic_poweroff_late - Generic poweroff_late callback for subsystems.
+ * @dev: Device to handle.
+ */
+int pm_generic_poweroff_late(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->poweroff_late ? pm->poweroff_late(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_poweroff_late);
+
+/**
+ * pm_generic_poweroff - Generic poweroff callback for subsystems.
+ * @dev: Device to handle.
+ */
+int pm_generic_poweroff(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->poweroff ? pm->poweroff(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_poweroff);
+
+/**
+ * pm_generic_thaw_noirq - Generic thaw_noirq callback for subsystems.
+ * @dev: Device to thaw.
+ */
+int pm_generic_thaw_noirq(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->thaw_noirq ? pm->thaw_noirq(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_thaw_noirq);
+
+/**
+ * pm_generic_thaw_early - Generic thaw_early callback for subsystems.
+ * @dev: Device to thaw.
+ */
+int pm_generic_thaw_early(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->thaw_early ? pm->thaw_early(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_thaw_early);
+
+/**
+ * pm_generic_thaw - Generic thaw callback for subsystems.
+ * @dev: Device to thaw.
+ */
+int pm_generic_thaw(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->thaw ? pm->thaw(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_thaw);
+
+/**
+ * pm_generic_resume_noirq - Generic resume_noirq callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_resume_noirq(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->resume_noirq ? pm->resume_noirq(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_resume_noirq);
+
+/**
+ * pm_generic_resume_early - Generic resume_early callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_resume_early(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->resume_early ? pm->resume_early(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_resume_early);
+
+/**
+ * pm_generic_resume - Generic resume callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_resume(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->resume ? pm->resume(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_resume);
+
+/**
+ * pm_generic_restore_noirq - Generic restore_noirq callback for subsystems.
+ * @dev: Device to restore.
+ */
+int pm_generic_restore_noirq(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->restore_noirq ? pm->restore_noirq(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_restore_noirq);
+
+/**
+ * pm_generic_restore_early - Generic restore_early callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_restore_early(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->restore_early ? pm->restore_early(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_restore_early);
+
+/**
+ * pm_generic_restore - Generic restore callback for subsystems.
+ * @dev: Device to restore.
+ */
+int pm_generic_restore(struct device *dev)
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+ return pm && pm->restore ? pm->restore(dev) : 0;
+}
+EXPORT_SYMBOL_GPL(pm_generic_restore);
+
+/**
+ * pm_generic_complete - Generic routine competing a device power transition.
+ * @dev: Device to handle.
+ *
+ * Complete a device power transition during a system-wide power transition.
+ */
+void pm_generic_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+
+ /*
+ * Let runtime PM try to suspend devices that haven't been in use before
+ * going into the system-wide sleep state we're resuming from.
+ */
+ pm_runtime_idle(dev);
+}
+#endif /* CONFIG_PM_SLEEP */
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/main.c b/ap/os/linux/linux-3.4.x/drivers/base/power/main.c
new file mode 100644
index 0000000..77e3b97
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/main.c
@@ -0,0 +1,1389 @@
+/*
+ * drivers/base/power/main.c - Where the driver meets power management.
+ *
+ * Copyright (c) 2003 Patrick Mochel
+ * Copyright (c) 2003 Open Source Development Lab
+ *
+ * This file is released under the GPLv2
+ *
+ *
+ * The driver model core calls device_pm_add() when a device is registered.
+ * This will initialize the embedded device_pm_info object in the device
+ * and add it to the list of power-controlled devices. sysfs entries for
+ * controlling device power management will also be added.
+ *
+ * A separate list is used for keeping track of power info, because the power
+ * domain dependencies may differ from the ancestral dependencies that the
+ * subsystem list maintains.
+ */
+
+#include <linux/device.h>
+#include <linux/kallsyms.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/resume-trace.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/async.h>
+#include <linux/suspend.h>
+#include <linux/timer.h>
+
+#include "../base.h"
+#include "power.h"
+
+typedef int (*pm_callback_t)(struct device *);
+
+/*
+ * The entries in the dpm_list list are in a depth first order, simply
+ * because children are guaranteed to be discovered after parents, and
+ * are inserted at the back of the list on discovery.
+ *
+ * Since device_pm_add() may be called with a device lock held,
+ * we must never try to acquire a device lock while holding
+ * dpm_list_mutex.
+ */
+
+LIST_HEAD(dpm_list);
+LIST_HEAD(dpm_prepared_list);
+LIST_HEAD(dpm_suspended_list);
+LIST_HEAD(dpm_late_early_list);
+LIST_HEAD(dpm_noirq_list);
+
+struct suspend_stats suspend_stats;
+static DEFINE_MUTEX(dpm_list_mtx);
+static pm_message_t pm_transition;
+
+struct dpm_watchdog {
+ struct device *dev;
+ struct task_struct *tsk;
+ struct timer_list timer;
+};
+
+static int async_error;
+
+/**
+ * device_pm_init - Initialize the PM-related part of a device object.
+ * @dev: Device object being initialized.
+ */
+void device_pm_init(struct device *dev)
+{
+ dev->power.is_prepared = false;
+ dev->power.is_suspended = false;
+ init_completion(&dev->power.completion);
+ complete_all(&dev->power.completion);
+ dev->power.wakeup = NULL;
+ spin_lock_init(&dev->power.lock);
+ pm_runtime_init(dev);
+ INIT_LIST_HEAD(&dev->power.entry);
+ dev->power.power_state = PMSG_INVALID;
+}
+
+/**
+ * device_pm_lock - Lock the list of active devices used by the PM core.
+ */
+void device_pm_lock(void)
+{
+ mutex_lock(&dpm_list_mtx);
+}
+
+/**
+ * device_pm_unlock - Unlock the list of active devices used by the PM core.
+ */
+void device_pm_unlock(void)
+{
+ mutex_unlock(&dpm_list_mtx);
+}
+
+/**
+ * device_pm_add - Add a device to the PM core's list of active devices.
+ * @dev: Device to add to the list.
+ */
+void device_pm_add(struct device *dev)
+{
+ pr_debug("PM: Adding info for %s:%s\n",
+ dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
+ mutex_lock(&dpm_list_mtx);
+ if (dev->parent && dev->parent->power.is_prepared)
+ dev_warn(dev, "parent %s should not be sleeping\n",
+ dev_name(dev->parent));
+ list_add_tail(&dev->power.entry, &dpm_list);
+ dev_pm_qos_constraints_init(dev);
+ mutex_unlock(&dpm_list_mtx);
+}
+
+/**
+ * device_pm_remove - Remove a device from the PM core's list of active devices.
+ * @dev: Device to be removed from the list.
+ */
+void device_pm_remove(struct device *dev)
+{
+ pr_debug("PM: Removing info for %s:%s\n",
+ dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
+ complete_all(&dev->power.completion);
+ mutex_lock(&dpm_list_mtx);
+ dev_pm_qos_constraints_destroy(dev);
+ list_del_init(&dev->power.entry);
+ mutex_unlock(&dpm_list_mtx);
+ device_wakeup_disable(dev);
+ pm_runtime_remove(dev);
+}
+
+/**
+ * device_pm_move_before - Move device in the PM core's list of active devices.
+ * @deva: Device to move in dpm_list.
+ * @devb: Device @deva should come before.
+ */
+void device_pm_move_before(struct device *deva, struct device *devb)
+{
+ pr_debug("PM: Moving %s:%s before %s:%s\n",
+ deva->bus ? deva->bus->name : "No Bus", dev_name(deva),
+ devb->bus ? devb->bus->name : "No Bus", dev_name(devb));
+ /* Delete deva from dpm_list and reinsert before devb. */
+ list_move_tail(&deva->power.entry, &devb->power.entry);
+}
+
+/**
+ * device_pm_move_after - Move device in the PM core's list of active devices.
+ * @deva: Device to move in dpm_list.
+ * @devb: Device @deva should come after.
+ */
+void device_pm_move_after(struct device *deva, struct device *devb)
+{
+ pr_debug("PM: Moving %s:%s after %s:%s\n",
+ deva->bus ? deva->bus->name : "No Bus", dev_name(deva),
+ devb->bus ? devb->bus->name : "No Bus", dev_name(devb));
+ /* Delete deva from dpm_list and reinsert after devb. */
+ list_move(&deva->power.entry, &devb->power.entry);
+}
+
+/**
+ * device_pm_move_last - Move device to end of the PM core's list of devices.
+ * @dev: Device to move in dpm_list.
+ */
+void device_pm_move_last(struct device *dev)
+{
+ pr_debug("PM: Moving %s:%s to end of list\n",
+ dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
+ list_move_tail(&dev->power.entry, &dpm_list);
+}
+
+static ktime_t initcall_debug_start(struct device *dev)
+{
+ ktime_t calltime = ktime_set(0, 0);
+
+ if (initcall_debug) {
+ pr_info("calling %s+ @ %i, parent: %s\n",
+ dev_name(dev), task_pid_nr(current),
+ dev->parent ? dev_name(dev->parent) : "none");
+ calltime = ktime_get();
+ }
+
+ return calltime;
+}
+
+static void initcall_debug_report(struct device *dev, ktime_t calltime,
+ int error)
+{
+ ktime_t delta, rettime;
+
+ if (initcall_debug) {
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev),
+ error, (unsigned long long)ktime_to_ns(delta) >> 10);
+ }
+}
+
+/**
+ * dpm_wait - Wait for a PM operation to complete.
+ * @dev: Device to wait for.
+ * @async: If unset, wait only if the device's power.async_suspend flag is set.
+ */
+static void dpm_wait(struct device *dev, bool async)
+{
+ if (!dev)
+ return;
+
+ if (async || (pm_async_enabled && dev->power.async_suspend))
+ wait_for_completion(&dev->power.completion);
+}
+
+static int dpm_wait_fn(struct device *dev, void *async_ptr)
+{
+ dpm_wait(dev, *((bool *)async_ptr));
+ return 0;
+}
+
+static void dpm_wait_for_children(struct device *dev, bool async)
+{
+ device_for_each_child(dev, &async, dpm_wait_fn);
+}
+
+/**
+ * pm_op - Return the PM operation appropriate for given PM event.
+ * @ops: PM operations to choose from.
+ * @state: PM transition of the system being carried out.
+ */
+static pm_callback_t pm_op(const struct dev_pm_ops *ops, pm_message_t state)
+{
+ switch (state.event) {
+#ifdef CONFIG_SUSPEND
+ case PM_EVENT_SUSPEND:
+ return ops->suspend;
+ case PM_EVENT_RESUME:
+ return ops->resume;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_QUIESCE:
+ return ops->freeze;
+ case PM_EVENT_HIBERNATE:
+ return ops->poweroff;
+ case PM_EVENT_THAW:
+ case PM_EVENT_RECOVER:
+ return ops->thaw;
+ break;
+ case PM_EVENT_RESTORE:
+ return ops->restore;
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
+ }
+
+ return NULL;
+}
+
+/**
+ * pm_late_early_op - Return the PM operation appropriate for given PM event.
+ * @ops: PM operations to choose from.
+ * @state: PM transition of the system being carried out.
+ *
+ * Runtime PM is disabled for @dev while this function is being executed.
+ */
+static pm_callback_t pm_late_early_op(const struct dev_pm_ops *ops,
+ pm_message_t state)
+{
+ switch (state.event) {
+#ifdef CONFIG_SUSPEND
+ case PM_EVENT_SUSPEND:
+ return ops->suspend_late;
+ case PM_EVENT_RESUME:
+ return ops->resume_early;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_QUIESCE:
+ return ops->freeze_late;
+ case PM_EVENT_HIBERNATE:
+ return ops->poweroff_late;
+ case PM_EVENT_THAW:
+ case PM_EVENT_RECOVER:
+ return ops->thaw_early;
+ case PM_EVENT_RESTORE:
+ return ops->restore_early;
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
+ }
+
+ return NULL;
+}
+
+/**
+ * pm_noirq_op - Return the PM operation appropriate for given PM event.
+ * @ops: PM operations to choose from.
+ * @state: PM transition of the system being carried out.
+ *
+ * The driver of @dev will not receive interrupts while this function is being
+ * executed.
+ */
+static pm_callback_t pm_noirq_op(const struct dev_pm_ops *ops, pm_message_t state)
+{
+ switch (state.event) {
+#ifdef CONFIG_SUSPEND
+ case PM_EVENT_SUSPEND:
+ return ops->suspend_noirq;
+ case PM_EVENT_RESUME:
+ return ops->resume_noirq;
+#endif /* CONFIG_SUSPEND */
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_QUIESCE:
+ return ops->freeze_noirq;
+ case PM_EVENT_HIBERNATE:
+ return ops->poweroff_noirq;
+ case PM_EVENT_THAW:
+ case PM_EVENT_RECOVER:
+ return ops->thaw_noirq;
+ case PM_EVENT_RESTORE:
+ return ops->restore_noirq;
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
+ }
+
+ return NULL;
+}
+
+static char *pm_verb(int event)
+{
+ switch (event) {
+ case PM_EVENT_SUSPEND:
+ return "suspend";
+ case PM_EVENT_RESUME:
+ return "resume";
+ case PM_EVENT_FREEZE:
+ return "freeze";
+ case PM_EVENT_QUIESCE:
+ return "quiesce";
+ case PM_EVENT_HIBERNATE:
+ return "hibernate";
+ case PM_EVENT_THAW:
+ return "thaw";
+ case PM_EVENT_RESTORE:
+ return "restore";
+ case PM_EVENT_RECOVER:
+ return "recover";
+ default:
+ return "(unknown PM event)";
+ }
+}
+
+static void pm_dev_dbg(struct device *dev, pm_message_t state, char *info)
+{
+ dev_dbg(dev, "%s%s%s\n", info, pm_verb(state.event),
+ ((state.event & PM_EVENT_SLEEP) && device_may_wakeup(dev)) ?
+ ", may wakeup" : "");
+}
+
+static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
+ int error)
+{
+ printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n",
+ dev_name(dev), pm_verb(state.event), info, error);
+}
+
+static void dpm_show_time(ktime_t starttime, pm_message_t state, char *info)
+{
+ ktime_t calltime;
+ u64 usecs64;
+ int usecs;
+
+ calltime = ktime_get();
+ usecs64 = ktime_to_ns(ktime_sub(calltime, starttime));
+ do_div(usecs64, NSEC_PER_USEC);
+ usecs = usecs64;
+ if (usecs == 0)
+ usecs = 1;
+ pr_info("PM: %s%s%s of devices complete after %ld.%03ld msecs\n",
+ info ?: "", info ? " " : "", pm_verb(state.event),
+ usecs / USEC_PER_MSEC, usecs % USEC_PER_MSEC);
+}
+
+static int dpm_run_callback(pm_callback_t cb, struct device *dev,
+ pm_message_t state, char *info)
+{
+ ktime_t calltime;
+ int error;
+
+ if (!cb)
+ return 0;
+
+ calltime = initcall_debug_start(dev);
+
+ pm_dev_dbg(dev, state, info);
+ error = cb(dev);
+ suspend_report_result(cb, error);
+
+ initcall_debug_report(dev, calltime, error);
+
+ return error;
+}
+
+/**
+ * dpm_wd_handler - Driver suspend / resume watchdog handler.
+ *
+ * Called when a driver has timed out suspending or resuming.
+ * There's not much we can do here to recover so BUG() out for
+ * a crash-dump
+ */
+static void dpm_wd_handler(unsigned long data)
+{
+ struct dpm_watchdog *wd = (void *)data;
+ struct device *dev = wd->dev;
+ struct task_struct *tsk = wd->tsk;
+
+ dev_emerg(dev, "**** DPM device timeout ****\n");
+ show_stack(tsk, NULL);
+
+ BUG();
+}
+
+/**
+ * dpm_wd_set - Enable pm watchdog for given device.
+ * @wd: Watchdog. Must be allocated on the stack.
+ * @dev: Device to handle.
+ */
+static void dpm_wd_set(struct dpm_watchdog *wd, struct device *dev)
+{
+ struct timer_list *timer = &wd->timer;
+
+ wd->dev = dev;
+ wd->tsk = get_current();
+
+ init_timer_on_stack(timer);
+ timer->expires = jiffies + HZ * 12;
+ timer->function = dpm_wd_handler;
+ timer->data = (unsigned long)wd;
+ add_timer(timer);
+}
+
+/**
+ * dpm_wd_clear - Disable pm watchdog.
+ * @wd: Watchdog to disable.
+ */
+static void dpm_wd_clear(struct dpm_watchdog *wd)
+{
+ struct timer_list *timer = &wd->timer;
+
+ del_timer_sync(timer);
+ destroy_timer_on_stack(timer);
+}
+
+/*------------------------- Resume routines -------------------------*/
+
+/**
+ * device_resume_noirq - Execute an "early resume" callback for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ *
+ * The driver of @dev will not receive interrupts while this function is being
+ * executed.
+ */
+static int device_resume_noirq(struct device *dev, pm_message_t state)
+{
+ pm_callback_t callback = NULL;
+ char *info = NULL;
+ int error = 0;
+
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);
+
+ if (dev->pm_domain) {
+ info = "noirq power domain ";
+ callback = pm_noirq_op(&dev->pm_domain->ops, state);
+ } else if (dev->type && dev->type->pm) {
+ info = "noirq type ";
+ callback = pm_noirq_op(dev->type->pm, state);
+ } else if (dev->class && dev->class->pm) {
+ info = "noirq class ";
+ callback = pm_noirq_op(dev->class->pm, state);
+ } else if (dev->bus && dev->bus->pm) {
+ info = "noirq bus ";
+ callback = pm_noirq_op(dev->bus->pm, state);
+ }
+
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "noirq driver ";
+ callback = pm_noirq_op(dev->driver->pm, state);
+ }
+
+ error = dpm_run_callback(callback, dev, state, info);
+
+ TRACE_RESUME(error);
+ return error;
+}
+
+/**
+ * dpm_resume_noirq - Execute "noirq resume" callbacks for all devices.
+ * @state: PM transition of the system being carried out.
+ *
+ * Call the "noirq" resume handlers for all devices in dpm_noirq_list and
+ * enable device drivers to receive interrupts.
+ */
+static void dpm_resume_noirq(pm_message_t state)
+{
+ ktime_t starttime = ktime_get();
+
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_noirq_list)) {
+ struct device *dev = to_device(dpm_noirq_list.next);
+ int error;
+
+ get_device(dev);
+ list_move_tail(&dev->power.entry, &dpm_late_early_list);
+ mutex_unlock(&dpm_list_mtx);
+
+ error = device_resume_noirq(dev, state);
+ if (error) {
+ suspend_stats.failed_resume_noirq++;
+ dpm_save_failed_step(SUSPEND_RESUME_NOIRQ);
+ dpm_save_failed_dev(dev_name(dev));
+ pm_dev_err(dev, state, " noirq", error);
+ }
+
+ mutex_lock(&dpm_list_mtx);
+ put_device(dev);
+ }
+ mutex_unlock(&dpm_list_mtx);
+ dpm_show_time(starttime, state, "noirq");
+ resume_device_irqs();
+}
+
+/**
+ * device_resume_early - Execute an "early resume" callback for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ *
+ * Runtime PM is disabled for @dev while this function is being executed.
+ */
+static int device_resume_early(struct device *dev, pm_message_t state)
+{
+ pm_callback_t callback = NULL;
+ char *info = NULL;
+ int error = 0;
+
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);
+
+ if (dev->pm_domain) {
+ info = "early power domain ";
+ callback = pm_late_early_op(&dev->pm_domain->ops, state);
+ } else if (dev->type && dev->type->pm) {
+ info = "early type ";
+ callback = pm_late_early_op(dev->type->pm, state);
+ } else if (dev->class && dev->class->pm) {
+ info = "early class ";
+ callback = pm_late_early_op(dev->class->pm, state);
+ } else if (dev->bus && dev->bus->pm) {
+ info = "early bus ";
+ callback = pm_late_early_op(dev->bus->pm, state);
+ }
+
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "early driver ";
+ callback = pm_late_early_op(dev->driver->pm, state);
+ }
+
+ error = dpm_run_callback(callback, dev, state, info);
+
+ TRACE_RESUME(error);
+ return error;
+}
+
+/**
+ * dpm_resume_early - Execute "early resume" callbacks for all devices.
+ * @state: PM transition of the system being carried out.
+ */
+static void dpm_resume_early(pm_message_t state)
+{
+ ktime_t starttime = ktime_get();
+
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_late_early_list)) {
+ struct device *dev = to_device(dpm_late_early_list.next);
+ int error;
+
+ get_device(dev);
+ list_move_tail(&dev->power.entry, &dpm_suspended_list);
+ mutex_unlock(&dpm_list_mtx);
+
+ error = device_resume_early(dev, state);
+ if (error) {
+ suspend_stats.failed_resume_early++;
+ dpm_save_failed_step(SUSPEND_RESUME_EARLY);
+ dpm_save_failed_dev(dev_name(dev));
+ pm_dev_err(dev, state, " early", error);
+ }
+
+ mutex_lock(&dpm_list_mtx);
+ put_device(dev);
+ }
+ mutex_unlock(&dpm_list_mtx);
+ dpm_show_time(starttime, state, "early");
+}
+
+/**
+ * dpm_resume_start - Execute "noirq" and "early" device callbacks.
+ * @state: PM transition of the system being carried out.
+ */
+void dpm_resume_start(pm_message_t state)
+{
+ dpm_resume_noirq(state);
+ dpm_resume_early(state);
+}
+EXPORT_SYMBOL_GPL(dpm_resume_start);
+
+/**
+ * device_resume - Execute "resume" callbacks for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ * @async: If true, the device is being resumed asynchronously.
+ */
+static int device_resume(struct device *dev, pm_message_t state, bool async)
+{
+ pm_callback_t callback = NULL;
+ char *info = NULL;
+ int error = 0;
+ bool put = false;
+ struct dpm_watchdog wd;
+
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);
+
+ dpm_wait(dev->parent, async);
+ device_lock(dev);
+
+ /*
+ * This is a fib. But we'll allow new children to be added below
+ * a resumed device, even if the device hasn't been completed yet.
+ */
+ dev->power.is_prepared = false;
+ dpm_wd_set(&wd, dev);
+
+ if (!dev->power.is_suspended)
+ goto Unlock;
+
+ pm_runtime_enable(dev);
+ put = true;
+
+ if (dev->pm_domain) {
+ info = "power domain ";
+ callback = pm_op(&dev->pm_domain->ops, state);
+ goto Driver;
+ }
+
+ if (dev->type && dev->type->pm) {
+ info = "type ";
+ callback = pm_op(dev->type->pm, state);
+ goto Driver;
+ }
+
+ if (dev->class) {
+ if (dev->class->pm) {
+ info = "class ";
+ callback = pm_op(dev->class->pm, state);
+ goto Driver;
+ } else if (dev->class->resume) {
+ info = "legacy class ";
+ callback = dev->class->resume;
+ goto End;
+ }
+ }
+
+ if (dev->bus) {
+ if (dev->bus->pm) {
+ info = "bus ";
+ callback = pm_op(dev->bus->pm, state);
+ } else if (dev->bus->resume) {
+ info = "legacy bus ";
+ callback = dev->bus->resume;
+ goto End;
+ }
+ }
+
+ Driver:
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "driver ";
+ callback = pm_op(dev->driver->pm, state);
+ }
+
+ End:
+ error = dpm_run_callback(callback, dev, state, info);
+ dev->power.is_suspended = false;
+
+ Unlock:
+ device_unlock(dev);
+ dpm_wd_clear(&wd);
+ complete_all(&dev->power.completion);
+
+ TRACE_RESUME(error);
+
+ if (put)
+ pm_runtime_put_sync(dev);
+
+ return error;
+}
+
+static void async_resume(void *data, async_cookie_t cookie)
+{
+ struct device *dev = (struct device *)data;
+ int error;
+
+ error = device_resume(dev, pm_transition, true);
+ if (error)
+ pm_dev_err(dev, pm_transition, " async", error);
+ put_device(dev);
+}
+
+static bool is_async(struct device *dev)
+{
+ return dev->power.async_suspend && pm_async_enabled
+ && !pm_trace_is_enabled();
+}
+
+/**
+ * dpm_resume - Execute "resume" callbacks for non-sysdev devices.
+ * @state: PM transition of the system being carried out.
+ *
+ * Execute the appropriate "resume" callback for all devices whose status
+ * indicates that they are suspended.
+ */
+void dpm_resume(pm_message_t state)
+{
+ struct device *dev;
+ ktime_t starttime = ktime_get();
+
+ might_sleep();
+
+ mutex_lock(&dpm_list_mtx);
+ pm_transition = state;
+ async_error = 0;
+
+ list_for_each_entry(dev, &dpm_suspended_list, power.entry) {
+ INIT_COMPLETION(dev->power.completion);
+ if (is_async(dev)) {
+ get_device(dev);
+ async_schedule(async_resume, dev);
+ }
+ }
+
+ while (!list_empty(&dpm_suspended_list)) {
+ dev = to_device(dpm_suspended_list.next);
+ get_device(dev);
+ if (!is_async(dev)) {
+ int error;
+
+ mutex_unlock(&dpm_list_mtx);
+
+ error = device_resume(dev, state, false);
+ if (error) {
+ suspend_stats.failed_resume++;
+ dpm_save_failed_step(SUSPEND_RESUME);
+ dpm_save_failed_dev(dev_name(dev));
+ pm_dev_err(dev, state, "", error);
+ }
+
+ mutex_lock(&dpm_list_mtx);
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move_tail(&dev->power.entry, &dpm_prepared_list);
+ put_device(dev);
+ }
+ mutex_unlock(&dpm_list_mtx);
+ async_synchronize_full();
+ dpm_show_time(starttime, state, NULL);
+}
+
+/**
+ * device_complete - Complete a PM transition for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ */
+static void device_complete(struct device *dev, pm_message_t state)
+{
+ void (*callback)(struct device *) = NULL;
+ char *info = NULL;
+
+ device_lock(dev);
+
+ if (dev->pm_domain) {
+ info = "completing power domain ";
+ callback = dev->pm_domain->ops.complete;
+ } else if (dev->type && dev->type->pm) {
+ info = "completing type ";
+ callback = dev->type->pm->complete;
+ } else if (dev->class && dev->class->pm) {
+ info = "completing class ";
+ callback = dev->class->pm->complete;
+ } else if (dev->bus && dev->bus->pm) {
+ info = "completing bus ";
+ callback = dev->bus->pm->complete;
+ }
+
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "completing driver ";
+ callback = dev->driver->pm->complete;
+ }
+
+ if (callback) {
+ pm_dev_dbg(dev, state, info);
+ callback(dev);
+ }
+
+ device_unlock(dev);
+}
+
+/**
+ * dpm_complete - Complete a PM transition for all non-sysdev devices.
+ * @state: PM transition of the system being carried out.
+ *
+ * Execute the ->complete() callbacks for all devices whose PM status is not
+ * DPM_ON (this allows new devices to be registered).
+ */
+void dpm_complete(pm_message_t state)
+{
+ struct list_head list;
+
+ might_sleep();
+
+ INIT_LIST_HEAD(&list);
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_prepared_list)) {
+ struct device *dev = to_device(dpm_prepared_list.prev);
+
+ get_device(dev);
+ dev->power.is_prepared = false;
+ list_move(&dev->power.entry, &list);
+ mutex_unlock(&dpm_list_mtx);
+
+ device_complete(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+ put_device(dev);
+ }
+ list_splice(&list, &dpm_list);
+ mutex_unlock(&dpm_list_mtx);
+}
+
+/**
+ * dpm_resume_end - Execute "resume" callbacks and complete system transition.
+ * @state: PM transition of the system being carried out.
+ *
+ * Execute "resume" callbacks for all devices and complete the PM transition of
+ * the system.
+ */
+void dpm_resume_end(pm_message_t state)
+{
+ dpm_resume(state);
+ dpm_complete(state);
+}
+EXPORT_SYMBOL_GPL(dpm_resume_end);
+
+
+/*------------------------- Suspend routines -------------------------*/
+
+/**
+ * resume_event - Return a "resume" message for given "suspend" sleep state.
+ * @sleep_state: PM message representing a sleep state.
+ *
+ * Return a PM message representing the resume event corresponding to given
+ * sleep state.
+ */
+static pm_message_t resume_event(pm_message_t sleep_state)
+{
+ switch (sleep_state.event) {
+ case PM_EVENT_SUSPEND:
+ return PMSG_RESUME;
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_QUIESCE:
+ return PMSG_RECOVER;
+ case PM_EVENT_HIBERNATE:
+ return PMSG_RESTORE;
+ }
+ return PMSG_ON;
+}
+
+/**
+ * device_suspend_noirq - Execute a "late suspend" callback for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ *
+ * The driver of @dev will not receive interrupts while this function is being
+ * executed.
+ */
+static int device_suspend_noirq(struct device *dev, pm_message_t state)
+{
+ pm_callback_t callback = NULL;
+ char *info = NULL;
+
+ if (dev->pm_domain) {
+ info = "noirq power domain ";
+ callback = pm_noirq_op(&dev->pm_domain->ops, state);
+ } else if (dev->type && dev->type->pm) {
+ info = "noirq type ";
+ callback = pm_noirq_op(dev->type->pm, state);
+ } else if (dev->class && dev->class->pm) {
+ info = "noirq class ";
+ callback = pm_noirq_op(dev->class->pm, state);
+ } else if (dev->bus && dev->bus->pm) {
+ info = "noirq bus ";
+ callback = pm_noirq_op(dev->bus->pm, state);
+ }
+
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "noirq driver ";
+ callback = pm_noirq_op(dev->driver->pm, state);
+ }
+
+ return dpm_run_callback(callback, dev, state, info);
+}
+
+/**
+ * dpm_suspend_noirq - Execute "noirq suspend" callbacks for all devices.
+ * @state: PM transition of the system being carried out.
+ *
+ * Prevent device drivers from receiving interrupts and call the "noirq" suspend
+ * handlers for all non-sysdev devices.
+ */
+static int dpm_suspend_noirq(pm_message_t state)
+{
+ ktime_t starttime = ktime_get();
+ int error = 0;
+
+ suspend_device_irqs();
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_late_early_list)) {
+ struct device *dev = to_device(dpm_late_early_list.prev);
+
+ get_device(dev);
+ mutex_unlock(&dpm_list_mtx);
+
+ error = device_suspend_noirq(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+ if (error) {
+ pm_dev_err(dev, state, " noirq", error);
+ suspend_stats.failed_suspend_noirq++;
+ dpm_save_failed_step(SUSPEND_SUSPEND_NOIRQ);
+ dpm_save_failed_dev(dev_name(dev));
+ put_device(dev);
+ break;
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_noirq_list);
+ put_device(dev);
+
+ if (pm_wakeup_pending()) {
+ error = -EBUSY;
+ break;
+ }
+ }
+ mutex_unlock(&dpm_list_mtx);
+ if (error)
+ dpm_resume_noirq(resume_event(state));
+ else
+ dpm_show_time(starttime, state, "noirq");
+ return error;
+}
+
+/**
+ * device_suspend_late - Execute a "late suspend" callback for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ *
+ * Runtime PM is disabled for @dev while this function is being executed.
+ */
+static int device_suspend_late(struct device *dev, pm_message_t state)
+{
+ pm_callback_t callback = NULL;
+ char *info = NULL;
+
+ if (dev->pm_domain) {
+ info = "late power domain ";
+ callback = pm_late_early_op(&dev->pm_domain->ops, state);
+ } else if (dev->type && dev->type->pm) {
+ info = "late type ";
+ callback = pm_late_early_op(dev->type->pm, state);
+ } else if (dev->class && dev->class->pm) {
+ info = "late class ";
+ callback = pm_late_early_op(dev->class->pm, state);
+ } else if (dev->bus && dev->bus->pm) {
+ info = "late bus ";
+ callback = pm_late_early_op(dev->bus->pm, state);
+ }
+
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "late driver ";
+ callback = pm_late_early_op(dev->driver->pm, state);
+ }
+
+ return dpm_run_callback(callback, dev, state, info);
+}
+
+/**
+ * dpm_suspend_late - Execute "late suspend" callbacks for all devices.
+ * @state: PM transition of the system being carried out.
+ */
+static int dpm_suspend_late(pm_message_t state)
+{
+ ktime_t starttime = ktime_get();
+ int error = 0;
+
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_suspended_list)) {
+ struct device *dev = to_device(dpm_suspended_list.prev);
+
+ get_device(dev);
+ mutex_unlock(&dpm_list_mtx);
+
+ error = device_suspend_late(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+ if (error) {
+ pm_dev_err(dev, state, " late", error);
+ suspend_stats.failed_suspend_late++;
+ dpm_save_failed_step(SUSPEND_SUSPEND_LATE);
+ dpm_save_failed_dev(dev_name(dev));
+ put_device(dev);
+ break;
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_late_early_list);
+ put_device(dev);
+
+ if (pm_wakeup_pending()) {
+ error = -EBUSY;
+ break;
+ }
+ }
+ mutex_unlock(&dpm_list_mtx);
+ if (error)
+ dpm_resume_early(resume_event(state));
+ else
+ dpm_show_time(starttime, state, "late");
+
+ return error;
+}
+
+/**
+ * dpm_suspend_end - Execute "late" and "noirq" device suspend callbacks.
+ * @state: PM transition of the system being carried out.
+ */
+int dpm_suspend_end(pm_message_t state)
+{
+ int error = dpm_suspend_late(state);
+ if (error)
+ return error;
+
+ error = dpm_suspend_noirq(state);
+ if (error) {
+ dpm_resume_early(resume_event(state));
+ return error;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dpm_suspend_end);
+
+/**
+ * legacy_suspend - Execute a legacy (bus or class) suspend callback for device.
+ * @dev: Device to suspend.
+ * @state: PM transition of the system being carried out.
+ * @cb: Suspend callback to execute.
+ */
+static int legacy_suspend(struct device *dev, pm_message_t state,
+ int (*cb)(struct device *dev, pm_message_t state))
+{
+ int error;
+ ktime_t calltime;
+
+ calltime = initcall_debug_start(dev);
+
+ error = cb(dev, state);
+ suspend_report_result(cb, error);
+
+ initcall_debug_report(dev, calltime, error);
+
+ return error;
+}
+
+/**
+ * device_suspend - Execute "suspend" callbacks for given device.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ * @async: If true, the device is being suspended asynchronously.
+ */
+static int __device_suspend(struct device *dev, pm_message_t state, bool async)
+{
+ pm_callback_t callback = NULL;
+ char *info = NULL;
+ int error = 0;
+ struct dpm_watchdog wd;
+
+ dpm_wait_for_children(dev, async);
+
+ if (async_error)
+ goto Complete;
+
+ pm_runtime_get_noresume(dev);
+ if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+ pm_wakeup_event(dev, 0);
+
+ if (pm_wakeup_pending()) {
+ pm_runtime_put_sync(dev);
+ async_error = -EBUSY;
+ goto Complete;
+ }
+
+ dpm_wd_set(&wd, dev);
+
+ device_lock(dev);
+
+ if (dev->pm_domain) {
+ info = "power domain ";
+ callback = pm_op(&dev->pm_domain->ops, state);
+ goto Run;
+ }
+
+ if (dev->type && dev->type->pm) {
+ info = "type ";
+ callback = pm_op(dev->type->pm, state);
+ goto Run;
+ }
+
+ if (dev->class) {
+ if (dev->class->pm) {
+ info = "class ";
+ callback = pm_op(dev->class->pm, state);
+ goto Run;
+ } else if (dev->class->suspend) {
+ pm_dev_dbg(dev, state, "legacy class ");
+ error = legacy_suspend(dev, state, dev->class->suspend);
+ goto End;
+ }
+ }
+
+ if (dev->bus) {
+ if (dev->bus->pm) {
+ info = "bus ";
+ callback = pm_op(dev->bus->pm, state);
+ } else if (dev->bus->suspend) {
+ pm_dev_dbg(dev, state, "legacy bus ");
+ error = legacy_suspend(dev, state, dev->bus->suspend);
+ goto End;
+ }
+ }
+
+ Run:
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "driver ";
+ callback = pm_op(dev->driver->pm, state);
+ }
+
+ error = dpm_run_callback(callback, dev, state, info);
+
+ End:
+ if (!error) {
+ dev->power.is_suspended = true;
+ if (dev->power.wakeup_path
+ && dev->parent && !dev->parent->power.ignore_children)
+ dev->parent->power.wakeup_path = true;
+ }
+
+ device_unlock(dev);
+
+ dpm_wd_clear(&wd);
+
+ Complete:
+ complete_all(&dev->power.completion);
+
+ if (error) {
+ pm_runtime_put_sync(dev);
+ async_error = error;
+ } else if (dev->power.is_suspended) {
+ __pm_runtime_disable(dev, false);
+ }
+
+ return error;
+}
+
+static void async_suspend(void *data, async_cookie_t cookie)
+{
+ struct device *dev = (struct device *)data;
+ int error;
+
+ error = __device_suspend(dev, pm_transition, true);
+ if (error) {
+ dpm_save_failed_dev(dev_name(dev));
+ pm_dev_err(dev, pm_transition, " async", error);
+ }
+
+ put_device(dev);
+}
+
+static int device_suspend(struct device *dev)
+{
+ INIT_COMPLETION(dev->power.completion);
+
+ if (pm_async_enabled && dev->power.async_suspend) {
+ get_device(dev);
+ async_schedule(async_suspend, dev);
+ return 0;
+ }
+
+ return __device_suspend(dev, pm_transition, false);
+}
+
+/**
+ * dpm_suspend - Execute "suspend" callbacks for all non-sysdev devices.
+ * @state: PM transition of the system being carried out.
+ */
+int dpm_suspend(pm_message_t state)
+{
+ ktime_t starttime = ktime_get();
+ int error = 0;
+
+ might_sleep();
+
+ mutex_lock(&dpm_list_mtx);
+ pm_transition = state;
+ async_error = 0;
+ while (!list_empty(&dpm_prepared_list)) {
+ struct device *dev = to_device(dpm_prepared_list.prev);
+
+ get_device(dev);
+ mutex_unlock(&dpm_list_mtx);
+
+ error = device_suspend(dev);
+
+ mutex_lock(&dpm_list_mtx);
+ if (error) {
+ pm_dev_err(dev, state, "", error);
+ dpm_save_failed_dev(dev_name(dev));
+ put_device(dev);
+ break;
+ }
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_suspended_list);
+ put_device(dev);
+ if (async_error)
+ break;
+ }
+ mutex_unlock(&dpm_list_mtx);
+ async_synchronize_full();
+ if (!error)
+ error = async_error;
+ if (error) {
+ suspend_stats.failed_suspend++;
+ dpm_save_failed_step(SUSPEND_SUSPEND);
+ } else
+ dpm_show_time(starttime, state, NULL);
+ return error;
+}
+
+/**
+ * device_prepare - Prepare a device for system power transition.
+ * @dev: Device to handle.
+ * @state: PM transition of the system being carried out.
+ *
+ * Execute the ->prepare() callback(s) for given device. No new children of the
+ * device may be registered after this function has returned.
+ */
+static int device_prepare(struct device *dev, pm_message_t state)
+{
+ int (*callback)(struct device *) = NULL;
+ char *info = NULL;
+ int error = 0;
+
+ device_lock(dev);
+
+ dev->power.wakeup_path = device_may_wakeup(dev);
+
+ if (dev->pm_domain) {
+ info = "preparing power domain ";
+ callback = dev->pm_domain->ops.prepare;
+ } else if (dev->type && dev->type->pm) {
+ info = "preparing type ";
+ callback = dev->type->pm->prepare;
+ } else if (dev->class && dev->class->pm) {
+ info = "preparing class ";
+ callback = dev->class->pm->prepare;
+ } else if (dev->bus && dev->bus->pm) {
+ info = "preparing bus ";
+ callback = dev->bus->pm->prepare;
+ }
+
+ if (!callback && dev->driver && dev->driver->pm) {
+ info = "preparing driver ";
+ callback = dev->driver->pm->prepare;
+ }
+
+ if (callback) {
+ error = callback(dev);
+ suspend_report_result(callback, error);
+ }
+
+ device_unlock(dev);
+
+ return error;
+}
+
+/**
+ * dpm_prepare - Prepare all non-sysdev devices for a system PM transition.
+ * @state: PM transition of the system being carried out.
+ *
+ * Execute the ->prepare() callback(s) for all devices.
+ */
+int dpm_prepare(pm_message_t state)
+{
+ int error = 0;
+
+ might_sleep();
+
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_list)) {
+ struct device *dev = to_device(dpm_list.next);
+
+ get_device(dev);
+ mutex_unlock(&dpm_list_mtx);
+
+ error = device_prepare(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+ if (error) {
+ if (error == -EAGAIN) {
+ put_device(dev);
+ error = 0;
+ continue;
+ }
+ printk(KERN_INFO "PM: Device %s not prepared "
+ "for power transition: code %d\n",
+ dev_name(dev), error);
+ put_device(dev);
+ break;
+ }
+ dev->power.is_prepared = true;
+ if (!list_empty(&dev->power.entry))
+ list_move_tail(&dev->power.entry, &dpm_prepared_list);
+ put_device(dev);
+ }
+ mutex_unlock(&dpm_list_mtx);
+ return error;
+}
+
+/**
+ * dpm_suspend_start - Prepare devices for PM transition and suspend them.
+ * @state: PM transition of the system being carried out.
+ *
+ * Prepare all non-sysdev devices for system PM transition and execute "suspend"
+ * callbacks for them.
+ */
+int dpm_suspend_start(pm_message_t state)
+{
+ int error;
+
+ error = dpm_prepare(state);
+ if (error) {
+ suspend_stats.failed_prepare++;
+ dpm_save_failed_step(SUSPEND_PREPARE);
+ } else
+ error = dpm_suspend(state);
+ return error;
+}
+EXPORT_SYMBOL_GPL(dpm_suspend_start);
+
+void __suspend_report_result(const char *function, void *fn, int ret)
+{
+ if (ret)
+ printk(KERN_ERR "%s(): %pF returns %d\n", function, fn, ret);
+}
+EXPORT_SYMBOL_GPL(__suspend_report_result);
+
+/**
+ * device_pm_wait_for_dev - Wait for suspend/resume of a device to complete.
+ * @dev: Device to wait for.
+ * @subordinate: Device that needs to wait for @dev.
+ */
+int device_pm_wait_for_dev(struct device *subordinate, struct device *dev)
+{
+ dpm_wait(dev, subordinate->power.async_suspend);
+ return async_error;
+}
+EXPORT_SYMBOL_GPL(device_pm_wait_for_dev);
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/opp.c b/ap/os/linux/linux-3.4.x/drivers/base/power/opp.c
new file mode 100644
index 0000000..ac993ea
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/opp.c
@@ -0,0 +1,676 @@
+/*
+ * Generic OPP Interface
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ * Nishanth Menon
+ * Romit Dasgupta
+ * Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+#include <linux/opp.h>
+
+/*
+ * Internal data structure organization with the OPP layer library is as
+ * follows:
+ * dev_opp_list (root)
+ * |- device 1 (represents voltage domain 1)
+ * | |- opp 1 (availability, freq, voltage)
+ * | |- opp 2 ..
+ * ... ...
+ * | `- opp n ..
+ * |- device 2 (represents the next voltage domain)
+ * ...
+ * `- device m (represents mth voltage domain)
+ * device 1, 2.. are represented by dev_opp structure while each opp
+ * is represented by the opp structure.
+ */
+
+/**
+ * struct opp - Generic OPP description structure
+ * @node: opp list node. The nodes are maintained throughout the lifetime
+ * of boot. It is expected only an optimal set of OPPs are
+ * added to the library by the SoC framework.
+ * RCU usage: opp list is traversed with RCU locks. node
+ * modification is possible realtime, hence the modifications
+ * are protected by the dev_opp_list_lock for integrity.
+ * IMPORTANT: the opp nodes should be maintained in increasing
+ * order.
+ * @available: true/false - marks if this OPP as available or not
+ * @rate: Frequency in hertz
+ * @u_volt: Nominal voltage in microvolts corresponding to this OPP
+ * @dev_opp: points back to the device_opp struct this opp belongs to
+ *
+ * This structure stores the OPP information for a given device.
+ */
+struct opp {
+ struct list_head node;
+
+ bool available;
+ unsigned long rate;
+ unsigned long u_volt;
+
+ struct device_opp *dev_opp;
+};
+
+/**
+ * struct device_opp - Device opp structure
+ * @node: list node - contains the devices with OPPs that
+ * have been registered. Nodes once added are not modified in this
+ * list.
+ * RCU usage: nodes are not modified in the list of device_opp,
+ * however addition is possible and is secured by dev_opp_list_lock
+ * @dev: device pointer
+ * @head: notifier head to notify the OPP availability changes.
+ * @opp_list: list of opps
+ *
+ * This is an internal data structure maintaining the link to opps attached to
+ * a device. This structure is not meant to be shared to users as it is
+ * meant for book keeping and private to OPP library
+ */
+struct device_opp {
+ struct list_head node;
+
+ struct device *dev;
+ struct srcu_notifier_head head;
+ struct list_head opp_list;
+};
+
+/*
+ * The root of the list of all devices. All device_opp structures branch off
+ * from here, with each device_opp containing the list of opp it supports in
+ * various states of availability.
+ */
+static LIST_HEAD(dev_opp_list);
+/* Lock to allow exclusive modification to the device and opp lists */
+static DEFINE_MUTEX(dev_opp_list_lock);
+
+/**
+ * find_device_opp() - find device_opp struct using device pointer
+ * @dev: device pointer used to lookup device OPPs
+ *
+ * Search list of device OPPs for one containing matching device. Does a RCU
+ * reader operation to grab the pointer needed.
+ *
+ * Returns pointer to 'struct device_opp' if found, otherwise -ENODEV or
+ * -EINVAL based on type of error.
+ *
+ * Locking: This function must be called under rcu_read_lock(). device_opp
+ * is a RCU protected pointer. This means that device_opp is valid as long
+ * as we are under RCU lock.
+ */
+static struct device_opp *find_device_opp(struct device *dev)
+{
+ struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV);
+
+ if (unlikely(IS_ERR_OR_NULL(dev))) {
+ pr_err("%s: Invalid parameters\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ list_for_each_entry_rcu(tmp_dev_opp, &dev_opp_list, node) {
+ if (tmp_dev_opp->dev == dev) {
+ dev_opp = tmp_dev_opp;
+ break;
+ }
+ }
+
+ return dev_opp;
+}
+
+/**
+ * opp_get_voltage() - Gets the voltage corresponding to an available opp
+ * @opp: opp for which voltage has to be returned for
+ *
+ * Return voltage in micro volt corresponding to the opp, else
+ * return 0
+ *
+ * Locking: This function must be called under rcu_read_lock(). opp is a rcu
+ * protected pointer. This means that opp which could have been fetched by
+ * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
+ * under RCU lock. The pointer returned by the opp_find_freq family must be
+ * used in the same section as the usage of this function with the pointer
+ * prior to unlocking with rcu_read_unlock() to maintain the integrity of the
+ * pointer.
+ */
+unsigned long opp_get_voltage(struct opp *opp)
+{
+ struct opp *tmp_opp;
+ unsigned long v = 0;
+
+ tmp_opp = rcu_dereference(opp);
+ if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available)
+ pr_err("%s: Invalid parameters\n", __func__);
+ else
+ v = tmp_opp->u_volt;
+
+ return v;
+}
+
+/**
+ * opp_get_freq() - Gets the frequency corresponding to an available opp
+ * @opp: opp for which frequency has to be returned for
+ *
+ * Return frequency in hertz corresponding to the opp, else
+ * return 0
+ *
+ * Locking: This function must be called under rcu_read_lock(). opp is a rcu
+ * protected pointer. This means that opp which could have been fetched by
+ * opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
+ * under RCU lock. The pointer returned by the opp_find_freq family must be
+ * used in the same section as the usage of this function with the pointer
+ * prior to unlocking with rcu_read_unlock() to maintain the integrity of the
+ * pointer.
+ */
+unsigned long opp_get_freq(struct opp *opp)
+{
+ struct opp *tmp_opp;
+ unsigned long f = 0;
+
+ tmp_opp = rcu_dereference(opp);
+ if (unlikely(IS_ERR_OR_NULL(tmp_opp)) || !tmp_opp->available)
+ pr_err("%s: Invalid parameters\n", __func__);
+ else
+ f = tmp_opp->rate;
+
+ return f;
+}
+
+/**
+ * opp_get_opp_count() - Get number of opps available in the opp list
+ * @dev: device for which we do this operation
+ *
+ * This function returns the number of available opps if there are any,
+ * else returns 0 if none or the corresponding error value.
+ *
+ * Locking: This function must be called under rcu_read_lock(). This function
+ * internally references two RCU protected structures: device_opp and opp which
+ * are safe as long as we are under a common RCU locked section.
+ */
+int opp_get_opp_count(struct device *dev)
+{
+ struct device_opp *dev_opp;
+ struct opp *temp_opp;
+ int count = 0;
+
+ dev_opp = find_device_opp(dev);
+ if (IS_ERR(dev_opp)) {
+ int r = PTR_ERR(dev_opp);
+ dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r);
+ return r;
+ }
+
+ list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
+ if (temp_opp->available)
+ count++;
+ }
+
+ return count;
+}
+
+/**
+ * opp_find_freq_exact() - search for an exact frequency
+ * @dev: device for which we do this operation
+ * @freq: frequency to search for
+ * @available: true/false - match for available opp
+ *
+ * Searches for exact match in the opp list and returns pointer to the matching
+ * opp if found, else returns ERR_PTR in case of error and should be handled
+ * using IS_ERR.
+ *
+ * Note: available is a modifier for the search. if available=true, then the
+ * match is for exact matching frequency and is available in the stored OPP
+ * table. if false, the match is for exact frequency which is not available.
+ *
+ * This provides a mechanism to enable an opp which is not available currently
+ * or the opposite as well.
+ *
+ * Locking: This function must be called under rcu_read_lock(). opp is a rcu
+ * protected pointer. The reason for the same is that the opp pointer which is
+ * returned will remain valid for use with opp_get_{voltage, freq} only while
+ * under the locked area. The pointer returned must be used prior to unlocking
+ * with rcu_read_unlock() to maintain the integrity of the pointer.
+ */
+struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq,
+ bool available)
+{
+ struct device_opp *dev_opp;
+ struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+
+ dev_opp = find_device_opp(dev);
+ if (IS_ERR(dev_opp)) {
+ int r = PTR_ERR(dev_opp);
+ dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r);
+ return ERR_PTR(r);
+ }
+
+ list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
+ if (temp_opp->available == available &&
+ temp_opp->rate == freq) {
+ opp = temp_opp;
+ break;
+ }
+ }
+
+ return opp;
+}
+
+/**
+ * opp_find_freq_ceil() - Search for an rounded ceil freq
+ * @dev: device for which we do this operation
+ * @freq: Start frequency
+ *
+ * Search for the matching ceil *available* OPP from a starting freq
+ * for a device.
+ *
+ * Returns matching *opp and refreshes *freq accordingly, else returns
+ * ERR_PTR in case of error and should be handled using IS_ERR.
+ *
+ * Locking: This function must be called under rcu_read_lock(). opp is a rcu
+ * protected pointer. The reason for the same is that the opp pointer which is
+ * returned will remain valid for use with opp_get_{voltage, freq} only while
+ * under the locked area. The pointer returned must be used prior to unlocking
+ * with rcu_read_unlock() to maintain the integrity of the pointer.
+ */
+struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq)
+{
+ struct device_opp *dev_opp;
+ struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+
+ if (!dev || !freq) {
+ dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
+ return ERR_PTR(-EINVAL);
+ }
+
+ dev_opp = find_device_opp(dev);
+ if (IS_ERR(dev_opp))
+ return opp;
+
+ list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
+ if (temp_opp->available && temp_opp->rate >= *freq) {
+ opp = temp_opp;
+ *freq = opp->rate;
+ break;
+ }
+ }
+
+ return opp;
+}
+
+/**
+ * opp_find_freq_floor() - Search for a rounded floor freq
+ * @dev: device for which we do this operation
+ * @freq: Start frequency
+ *
+ * Search for the matching floor *available* OPP from a starting freq
+ * for a device.
+ *
+ * Returns matching *opp and refreshes *freq accordingly, else returns
+ * ERR_PTR in case of error and should be handled using IS_ERR.
+ *
+ * Locking: This function must be called under rcu_read_lock(). opp is a rcu
+ * protected pointer. The reason for the same is that the opp pointer which is
+ * returned will remain valid for use with opp_get_{voltage, freq} only while
+ * under the locked area. The pointer returned must be used prior to unlocking
+ * with rcu_read_unlock() to maintain the integrity of the pointer.
+ */
+struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq)
+{
+ struct device_opp *dev_opp;
+ struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+
+ if (!dev || !freq) {
+ dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
+ return ERR_PTR(-EINVAL);
+ }
+
+ dev_opp = find_device_opp(dev);
+ if (IS_ERR(dev_opp))
+ return opp;
+
+ list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
+ if (temp_opp->available) {
+ /* go to the next node, before choosing prev */
+ if (temp_opp->rate > *freq)
+ break;
+ else
+ opp = temp_opp;
+ }
+ }
+ if (!IS_ERR(opp))
+ *freq = opp->rate;
+
+ return opp;
+}
+
+/**
+ * opp_add() - Add an OPP table from a table definitions
+ * @dev: device for which we do this operation
+ * @freq: Frequency in Hz for this OPP
+ * @u_volt: Voltage in uVolts for this OPP
+ *
+ * This function adds an opp definition to the opp list and returns status.
+ * The opp is made available by default and it can be controlled using
+ * opp_enable/disable functions.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
+{
+ struct device_opp *dev_opp = NULL;
+ struct opp *opp, *new_opp;
+ struct list_head *head;
+
+ /* allocate new OPP node */
+ new_opp = kzalloc(sizeof(struct opp), GFP_KERNEL);
+ if (!new_opp) {
+ dev_warn(dev, "%s: Unable to create new OPP node\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ /* Check for existing list for 'dev' */
+ dev_opp = find_device_opp(dev);
+ if (IS_ERR(dev_opp)) {
+ /*
+ * Allocate a new device OPP table. In the infrequent case
+ * where a new device is needed to be added, we pay this
+ * penalty.
+ */
+ dev_opp = kzalloc(sizeof(struct device_opp), GFP_KERNEL);
+ if (!dev_opp) {
+ mutex_unlock(&dev_opp_list_lock);
+ kfree(new_opp);
+ dev_warn(dev,
+ "%s: Unable to create device OPP structure\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ dev_opp->dev = dev;
+ srcu_init_notifier_head(&dev_opp->head);
+ INIT_LIST_HEAD(&dev_opp->opp_list);
+
+ /* Secure the device list modification */
+ list_add_rcu(&dev_opp->node, &dev_opp_list);
+ }
+
+ /* populate the opp table */
+ new_opp->dev_opp = dev_opp;
+ new_opp->rate = freq;
+ new_opp->u_volt = u_volt;
+ new_opp->available = true;
+
+ /* Insert new OPP in order of increasing frequency */
+ head = &dev_opp->opp_list;
+ list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
+ if (new_opp->rate < opp->rate)
+ break;
+ else
+ head = &opp->node;
+ }
+
+ list_add_rcu(&new_opp->node, head);
+ mutex_unlock(&dev_opp_list_lock);
+
+ /*
+ * Notify the changes in the availability of the operable
+ * frequency/voltage list.
+ */
+ srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ADD, new_opp);
+ return 0;
+}
+
+/**
+ * opp_set_availability() - helper to set the availability of an opp
+ * @dev: device for which we do this operation
+ * @freq: OPP frequency to modify availability
+ * @availability_req: availability status requested for this opp
+ *
+ * Set the availability of an OPP with an RCU operation, opp_{enable,disable}
+ * share a common logic which is isolated here.
+ *
+ * Returns -EINVAL for bad pointers, -ENOMEM if no memory available for the
+ * copy operation, returns 0 if no modifcation was done OR modification was
+ * successful.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks to
+ * keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex locking or synchronize_rcu() blocking calls cannot be used.
+ */
+static int opp_set_availability(struct device *dev, unsigned long freq,
+ bool availability_req)
+{
+ struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV);
+ struct opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
+ int r = 0;
+
+ /* keep the node allocated */
+ new_opp = kmalloc(sizeof(struct opp), GFP_KERNEL);
+ if (!new_opp) {
+ dev_warn(dev, "%s: Unable to create OPP\n", __func__);
+ return -ENOMEM;
+ }
+
+ mutex_lock(&dev_opp_list_lock);
+
+ /* Find the device_opp */
+ list_for_each_entry(tmp_dev_opp, &dev_opp_list, node) {
+ if (dev == tmp_dev_opp->dev) {
+ dev_opp = tmp_dev_opp;
+ break;
+ }
+ }
+ if (IS_ERR(dev_opp)) {
+ r = PTR_ERR(dev_opp);
+ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
+ goto unlock;
+ }
+
+ /* Do we have the frequency? */
+ list_for_each_entry(tmp_opp, &dev_opp->opp_list, node) {
+ if (tmp_opp->rate == freq) {
+ opp = tmp_opp;
+ break;
+ }
+ }
+ if (IS_ERR(opp)) {
+ r = PTR_ERR(opp);
+ goto unlock;
+ }
+
+ /* Is update really needed? */
+ if (opp->available == availability_req)
+ goto unlock;
+ /* copy the old data over */
+ *new_opp = *opp;
+
+ /* plug in new node */
+ new_opp->available = availability_req;
+
+ list_replace_rcu(&opp->node, &new_opp->node);
+ mutex_unlock(&dev_opp_list_lock);
+ synchronize_rcu();
+
+ /* Notify the change of the OPP availability */
+ if (availability_req)
+ srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ENABLE,
+ new_opp);
+ else
+ srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_DISABLE,
+ new_opp);
+
+ /* clean up old opp */
+ new_opp = opp;
+ goto out;
+
+unlock:
+ mutex_unlock(&dev_opp_list_lock);
+out:
+ kfree(new_opp);
+ return r;
+}
+
+/**
+ * opp_enable() - Enable a specific OPP
+ * @dev: device for which we do this operation
+ * @freq: OPP frequency to enable
+ *
+ * Enables a provided opp. If the operation is valid, this returns 0, else the
+ * corresponding error value. It is meant to be used for users an OPP available
+ * after being temporarily made unavailable with opp_disable.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU and mutex locks to keep the
+ * integrity of the internal data structures. Callers should ensure that
+ * this function is *NOT* called under RCU protection or in contexts where
+ * mutex locking or synchronize_rcu() blocking calls cannot be used.
+ */
+int opp_enable(struct device *dev, unsigned long freq)
+{
+ return opp_set_availability(dev, freq, true);
+}
+
+/**
+ * opp_disable() - Disable a specific OPP
+ * @dev: device for which we do this operation
+ * @freq: OPP frequency to disable
+ *
+ * Disables a provided opp. If the operation is valid, this returns
+ * 0, else the corresponding error value. It is meant to be a temporary
+ * control by users to make this OPP not available until the circumstances are
+ * right to make it available again (with a call to opp_enable).
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU and mutex locks to keep the
+ * integrity of the internal data structures. Callers should ensure that
+ * this function is *NOT* called under RCU protection or in contexts where
+ * mutex locking or synchronize_rcu() blocking calls cannot be used.
+ */
+int opp_disable(struct device *dev, unsigned long freq)
+{
+ return opp_set_availability(dev, freq, false);
+}
+
+#ifdef CONFIG_CPU_FREQ
+/**
+ * opp_init_cpufreq_table() - create a cpufreq table for a device
+ * @dev: device for which we do this operation
+ * @table: Cpufreq table returned back to caller
+ *
+ * Generate a cpufreq table for a provided device- this assumes that the
+ * opp list is already initialized and ready for usage.
+ *
+ * This function allocates required memory for the cpufreq table. It is
+ * expected that the caller does the required maintenance such as freeing
+ * the table as required.
+ *
+ * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM
+ * if no memory available for the operation (table is not populated), returns 0
+ * if successful and table is populated.
+ *
+ * WARNING: It is important for the callers to ensure refreshing their copy of
+ * the table if any of the mentioned functions have been invoked in the interim.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * To simplify the logic, we pretend we are updater and hold relevant mutex here
+ * Callers should ensure that this function is *NOT* called under RCU protection
+ * or in contexts where mutex locking cannot be used.
+ */
+int opp_init_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table)
+{
+ struct device_opp *dev_opp;
+ struct opp *opp;
+ struct cpufreq_frequency_table *freq_table;
+ int i = 0;
+
+ /* Pretend as if I am an updater */
+ mutex_lock(&dev_opp_list_lock);
+
+ dev_opp = find_device_opp(dev);
+ if (IS_ERR(dev_opp)) {
+ int r = PTR_ERR(dev_opp);
+ mutex_unlock(&dev_opp_list_lock);
+ dev_err(dev, "%s: Device OPP not found (%d)\n", __func__, r);
+ return r;
+ }
+
+ freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) *
+ (opp_get_opp_count(dev) + 1), GFP_KERNEL);
+ if (!freq_table) {
+ mutex_unlock(&dev_opp_list_lock);
+ dev_warn(dev, "%s: Unable to allocate frequency table\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ list_for_each_entry(opp, &dev_opp->opp_list, node) {
+ if (opp->available) {
+ freq_table[i].index = i;
+ freq_table[i].frequency = opp->rate / 1000;
+ i++;
+ }
+ }
+ mutex_unlock(&dev_opp_list_lock);
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ *table = &freq_table[0];
+
+ return 0;
+}
+
+/**
+ * opp_free_cpufreq_table() - free the cpufreq table
+ * @dev: device for which we do this operation
+ * @table: table to free
+ *
+ * Free up the table allocated by opp_init_cpufreq_table
+ */
+void opp_free_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table)
+{
+ if (!table)
+ return;
+
+ kfree(*table);
+ *table = NULL;
+}
+#endif /* CONFIG_CPU_FREQ */
+
+/**
+ * opp_get_notifier() - find notifier_head of the device with opp
+ * @dev: device pointer used to lookup device OPPs.
+ */
+struct srcu_notifier_head *opp_get_notifier(struct device *dev)
+{
+ struct device_opp *dev_opp = find_device_opp(dev);
+
+ if (IS_ERR(dev_opp))
+ return ERR_CAST(dev_opp); /* matching type */
+
+ return &dev_opp->head;
+}
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/power.h b/ap/os/linux/linux-3.4.x/drivers/base/power/power.h
new file mode 100644
index 0000000..eeb4bff
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/power.h
@@ -0,0 +1,87 @@
+#include <linux/pm_qos.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+extern void pm_runtime_init(struct device *dev);
+extern void pm_runtime_remove(struct device *dev);
+
+#else /* !CONFIG_PM_RUNTIME */
+
+static inline void pm_runtime_init(struct device *dev) {}
+static inline void pm_runtime_remove(struct device *dev) {}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+
+/* kernel/power/main.c */
+extern int pm_async_enabled;
+
+/* drivers/base/power/main.c */
+extern struct list_head dpm_list; /* The active device list */
+
+static inline struct device *to_device(struct list_head *entry)
+{
+ return container_of(entry, struct device, power.entry);
+}
+
+extern void device_pm_init(struct device *dev);
+extern void device_pm_add(struct device *);
+extern void device_pm_remove(struct device *);
+extern void device_pm_move_before(struct device *, struct device *);
+extern void device_pm_move_after(struct device *, struct device *);
+extern void device_pm_move_last(struct device *);
+
+#else /* !CONFIG_PM_SLEEP */
+
+static inline void device_pm_init(struct device *dev)
+{
+ spin_lock_init(&dev->power.lock);
+ dev->power.power_state = PMSG_INVALID;
+ pm_runtime_init(dev);
+}
+
+static inline void device_pm_add(struct device *dev)
+{
+ dev_pm_qos_constraints_init(dev);
+}
+
+static inline void device_pm_remove(struct device *dev)
+{
+ dev_pm_qos_constraints_destroy(dev);
+ pm_runtime_remove(dev);
+}
+
+static inline void device_pm_move_before(struct device *deva,
+ struct device *devb) {}
+static inline void device_pm_move_after(struct device *deva,
+ struct device *devb) {}
+static inline void device_pm_move_last(struct device *dev) {}
+
+#endif /* !CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+
+/*
+ * sysfs.c
+ */
+
+extern int dpm_sysfs_add(struct device *dev);
+extern void dpm_sysfs_remove(struct device *dev);
+extern void rpm_sysfs_remove(struct device *dev);
+extern int wakeup_sysfs_add(struct device *dev);
+extern void wakeup_sysfs_remove(struct device *dev);
+extern int pm_qos_sysfs_add(struct device *dev);
+extern void pm_qos_sysfs_remove(struct device *dev);
+
+#else /* CONFIG_PM */
+
+static inline int dpm_sysfs_add(struct device *dev) { return 0; }
+static inline void dpm_sysfs_remove(struct device *dev) {}
+static inline void rpm_sysfs_remove(struct device *dev) {}
+static inline int wakeup_sysfs_add(struct device *dev) { return 0; }
+static inline void wakeup_sysfs_remove(struct device *dev) {}
+static inline int pm_qos_sysfs_add(struct device *dev) { return 0; }
+static inline void pm_qos_sysfs_remove(struct device *dev) {}
+
+#endif
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/qos.c b/ap/os/linux/linux-3.4.x/drivers/base/power/qos.c
new file mode 100644
index 0000000..b95ebf2
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/qos.c
@@ -0,0 +1,513 @@
+/*
+ * Devices PM QoS constraints management
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * This module exposes the interface to kernel space for specifying
+ * per-device PM QoS dependencies. It provides infrastructure for registration
+ * of:
+ *
+ * Dependents on a QoS value : register requests
+ * Watchers of QoS value : get notified when target QoS value changes
+ *
+ * This QoS design is best effort based. Dependents register their QoS needs.
+ * Watchers register to keep track of the current QoS needs of the system.
+ * Watchers can register different types of notification callbacks:
+ * . a per-device notification callback using the dev_pm_qos_*_notifier API.
+ * The notification chain data is stored in the per-device constraint
+ * data struct.
+ * . a system-wide notification callback using the dev_pm_qos_*_global_notifier
+ * API. The notification chain data is stored in a static variable.
+ *
+ * Note about the per-device constraint data struct allocation:
+ * . The per-device constraints data struct ptr is tored into the device
+ * dev_pm_info.
+ * . To minimize the data usage by the per-device constraints, the data struct
+ * is only allocated at the first call to dev_pm_qos_add_request.
+ * . The data is later free'd when the device is removed from the system.
+ * . A global mutex protects the constraints users from the data being
+ * allocated and free'd.
+ */
+
+#include <linux/pm_qos.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/export.h>
+
+#include "power.h"
+
+static DEFINE_MUTEX(dev_pm_qos_mtx);
+
+static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
+
+/**
+ * __dev_pm_qos_read_value - Get PM QoS constraint for a given device.
+ * @dev: Device to get the PM QoS constraint value for.
+ *
+ * This routine must be called with dev->power.lock held.
+ */
+s32 __dev_pm_qos_read_value(struct device *dev)
+{
+ struct pm_qos_constraints *c = dev->power.constraints;
+
+ return c ? pm_qos_read_value(c) : 0;
+}
+
+/**
+ * dev_pm_qos_read_value - Get PM QoS constraint for a given device (locked).
+ * @dev: Device to get the PM QoS constraint value for.
+ */
+s32 dev_pm_qos_read_value(struct device *dev)
+{
+ unsigned long flags;
+ s32 ret;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+ ret = __dev_pm_qos_read_value(dev);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ return ret;
+}
+
+/*
+ * apply_constraint
+ * @req: constraint request to apply
+ * @action: action to perform add/update/remove, of type enum pm_qos_req_action
+ * @value: defines the qos request
+ *
+ * Internal function to update the constraints list using the PM QoS core
+ * code and if needed call the per-device and the global notification
+ * callbacks
+ */
+static int apply_constraint(struct dev_pm_qos_request *req,
+ enum pm_qos_req_action action, int value)
+{
+ int ret, curr_value;
+
+ ret = pm_qos_update_target(req->dev->power.constraints,
+ &req->node, action, value);
+
+ if (ret) {
+ /* Call the global callbacks if needed */
+ curr_value = pm_qos_read_value(req->dev->power.constraints);
+ blocking_notifier_call_chain(&dev_pm_notifiers,
+ (unsigned long)curr_value,
+ req);
+ }
+
+ return ret;
+}
+
+/*
+ * dev_pm_qos_constraints_allocate
+ * @dev: device to allocate data for
+ *
+ * Called at the first call to add_request, for constraint data allocation
+ * Must be called with the dev_pm_qos_mtx mutex held
+ */
+static int dev_pm_qos_constraints_allocate(struct device *dev)
+{
+ struct pm_qos_constraints *c;
+ struct blocking_notifier_head *n;
+
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
+ if (!c)
+ return -ENOMEM;
+
+ n = kzalloc(sizeof(*n), GFP_KERNEL);
+ if (!n) {
+ kfree(c);
+ return -ENOMEM;
+ }
+ BLOCKING_INIT_NOTIFIER_HEAD(n);
+
+ plist_head_init(&c->list);
+ c->target_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
+ c->default_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
+ c->type = PM_QOS_MIN;
+ c->notifiers = n;
+
+ spin_lock_irq(&dev->power.lock);
+ dev->power.constraints = c;
+ spin_unlock_irq(&dev->power.lock);
+
+ return 0;
+}
+
+/**
+ * dev_pm_qos_constraints_init - Initalize device's PM QoS constraints pointer.
+ * @dev: target device
+ *
+ * Called from the device PM subsystem during device insertion under
+ * device_pm_lock().
+ */
+void dev_pm_qos_constraints_init(struct device *dev)
+{
+ mutex_lock(&dev_pm_qos_mtx);
+ dev->power.constraints = NULL;
+ dev->power.power_state = PMSG_ON;
+ mutex_unlock(&dev_pm_qos_mtx);
+}
+
+/**
+ * dev_pm_qos_constraints_destroy
+ * @dev: target device
+ *
+ * Called from the device PM subsystem on device removal under device_pm_lock().
+ */
+void dev_pm_qos_constraints_destroy(struct device *dev)
+{
+ struct dev_pm_qos_request *req, *tmp;
+ struct pm_qos_constraints *c;
+
+ /*
+ * If the device's PM QoS resume latency limit has been exposed to user
+ * space, it has to be hidden at this point.
+ */
+ dev_pm_qos_hide_latency_limit(dev);
+
+ mutex_lock(&dev_pm_qos_mtx);
+
+ dev->power.power_state = PMSG_INVALID;
+ c = dev->power.constraints;
+ if (!c)
+ goto out;
+
+ /* Flush the constraints list for the device */
+ plist_for_each_entry_safe(req, tmp, &c->list, node) {
+ /*
+ * Update constraints list and call the notification
+ * callbacks if needed
+ */
+ apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
+ memset(req, 0, sizeof(*req));
+ }
+
+ spin_lock_irq(&dev->power.lock);
+ dev->power.constraints = NULL;
+ spin_unlock_irq(&dev->power.lock);
+
+ kfree(c->notifiers);
+ kfree(c);
+
+ out:
+ mutex_unlock(&dev_pm_qos_mtx);
+}
+
+/**
+ * dev_pm_qos_add_request - inserts new qos request into the list
+ * @dev: target device for the constraint
+ * @req: pointer to a preallocated handle
+ * @value: defines the qos request
+ *
+ * This function inserts a new entry in the device constraints list of
+ * requested qos performance characteristics. It recomputes the aggregate
+ * QoS expectations of parameters and initializes the dev_pm_qos_request
+ * handle. Caller needs to save this handle for later use in updates and
+ * removal.
+ *
+ * Returns 1 if the aggregated constraint value has changed,
+ * 0 if the aggregated constraint value has not changed,
+ * -EINVAL in case of wrong parameters, -ENOMEM if there's not enough memory
+ * to allocate for data structures, -ENODEV if the device has just been removed
+ * from the system.
+ */
+int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
+ s32 value)
+{
+ int ret = 0;
+
+ if (!dev || !req) /*guard against callers passing in null */
+ return -EINVAL;
+
+ if (WARN(dev_pm_qos_request_active(req),
+ "%s() called for already added request\n", __func__))
+ return -EINVAL;
+
+ req->dev = dev;
+
+ mutex_lock(&dev_pm_qos_mtx);
+
+ if (!dev->power.constraints) {
+ if (dev->power.power_state.event == PM_EVENT_INVALID) {
+ /* The device has been removed from the system. */
+ req->dev = NULL;
+ ret = -ENODEV;
+ goto out;
+ } else {
+ /*
+ * Allocate the constraints data on the first call to
+ * add_request, i.e. only if the data is not already
+ * allocated and if the device has not been removed.
+ */
+ ret = dev_pm_qos_constraints_allocate(dev);
+ }
+ }
+
+ if (!ret)
+ ret = apply_constraint(req, PM_QOS_ADD_REQ, value);
+
+ out:
+ mutex_unlock(&dev_pm_qos_mtx);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
+
+/**
+ * dev_pm_qos_update_request - modifies an existing qos request
+ * @req : handle to list element holding a dev_pm_qos request to use
+ * @new_value: defines the qos request
+ *
+ * Updates an existing dev PM qos request along with updating the
+ * target value.
+ *
+ * Attempts are made to make this code callable on hot code paths.
+ *
+ * Returns 1 if the aggregated constraint value has changed,
+ * 0 if the aggregated constraint value has not changed,
+ * -EINVAL in case of wrong parameters, -ENODEV if the device has been
+ * removed from the system
+ */
+int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
+ s32 new_value)
+{
+ int ret = 0;
+
+ if (!req) /*guard against callers passing in null */
+ return -EINVAL;
+
+ if (WARN(!dev_pm_qos_request_active(req),
+ "%s() called for unknown object\n", __func__))
+ return -EINVAL;
+
+ mutex_lock(&dev_pm_qos_mtx);
+
+ if (req->dev->power.constraints) {
+ if (new_value != req->node.prio)
+ ret = apply_constraint(req, PM_QOS_UPDATE_REQ,
+ new_value);
+ } else {
+ /* Return if the device has been removed */
+ ret = -ENODEV;
+ }
+
+ mutex_unlock(&dev_pm_qos_mtx);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_update_request);
+
+/**
+ * dev_pm_qos_remove_request - modifies an existing qos request
+ * @req: handle to request list element
+ *
+ * Will remove pm qos request from the list of constraints and
+ * recompute the current target value. Call this on slow code paths.
+ *
+ * Returns 1 if the aggregated constraint value has changed,
+ * 0 if the aggregated constraint value has not changed,
+ * -EINVAL in case of wrong parameters, -ENODEV if the device has been
+ * removed from the system
+ */
+int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
+{
+ int ret = 0;
+
+ if (!req) /*guard against callers passing in null */
+ return -EINVAL;
+
+ if (WARN(!dev_pm_qos_request_active(req),
+ "%s() called for unknown object\n", __func__))
+ return -EINVAL;
+
+ mutex_lock(&dev_pm_qos_mtx);
+
+ if (req->dev->power.constraints) {
+ ret = apply_constraint(req, PM_QOS_REMOVE_REQ,
+ PM_QOS_DEFAULT_VALUE);
+ memset(req, 0, sizeof(*req));
+ } else {
+ /* Return if the device has been removed */
+ ret = -ENODEV;
+ }
+
+ mutex_unlock(&dev_pm_qos_mtx);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_remove_request);
+
+/**
+ * dev_pm_qos_add_notifier - sets notification entry for changes to target value
+ * of per-device PM QoS constraints
+ *
+ * @dev: target device for the constraint
+ * @notifier: notifier block managed by caller.
+ *
+ * Will register the notifier into a notification chain that gets called
+ * upon changes to the target value for the device.
+ *
+ * If the device's constraints object doesn't exist when this routine is called,
+ * it will be created (or error code will be returned if that fails).
+ */
+int dev_pm_qos_add_notifier(struct device *dev, struct notifier_block *notifier)
+{
+ int ret = 0;
+
+ mutex_lock(&dev_pm_qos_mtx);
+
+ if (!dev->power.constraints)
+ ret = dev->power.power_state.event != PM_EVENT_INVALID ?
+ dev_pm_qos_constraints_allocate(dev) : -ENODEV;
+
+ if (!ret)
+ ret = blocking_notifier_chain_register(
+ dev->power.constraints->notifiers, notifier);
+
+ mutex_unlock(&dev_pm_qos_mtx);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_add_notifier);
+
+/**
+ * dev_pm_qos_remove_notifier - deletes notification for changes to target value
+ * of per-device PM QoS constraints
+ *
+ * @dev: target device for the constraint
+ * @notifier: notifier block to be removed.
+ *
+ * Will remove the notifier from the notification chain that gets called
+ * upon changes to the target value.
+ */
+int dev_pm_qos_remove_notifier(struct device *dev,
+ struct notifier_block *notifier)
+{
+ int retval = 0;
+
+ mutex_lock(&dev_pm_qos_mtx);
+
+ /* Silently return if the constraints object is not present. */
+ if (dev->power.constraints)
+ retval = blocking_notifier_chain_unregister(
+ dev->power.constraints->notifiers,
+ notifier);
+
+ mutex_unlock(&dev_pm_qos_mtx);
+ return retval;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_remove_notifier);
+
+/**
+ * dev_pm_qos_add_global_notifier - sets notification entry for changes to
+ * target value of the PM QoS constraints for any device
+ *
+ * @notifier: notifier block managed by caller.
+ *
+ * Will register the notifier into a notification chain that gets called
+ * upon changes to the target value for any device.
+ */
+int dev_pm_qos_add_global_notifier(struct notifier_block *notifier)
+{
+ return blocking_notifier_chain_register(&dev_pm_notifiers, notifier);
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_add_global_notifier);
+
+/**
+ * dev_pm_qos_remove_global_notifier - deletes notification for changes to
+ * target value of PM QoS constraints for any device
+ *
+ * @notifier: notifier block to be removed.
+ *
+ * Will remove the notifier from the notification chain that gets called
+ * upon changes to the target value for any device.
+ */
+int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier)
+{
+ return blocking_notifier_chain_unregister(&dev_pm_notifiers, notifier);
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_remove_global_notifier);
+
+/**
+ * dev_pm_qos_add_ancestor_request - Add PM QoS request for device's ancestor.
+ * @dev: Device whose ancestor to add the request for.
+ * @req: Pointer to the preallocated handle.
+ * @value: Constraint latency value.
+ */
+int dev_pm_qos_add_ancestor_request(struct device *dev,
+ struct dev_pm_qos_request *req, s32 value)
+{
+ struct device *ancestor = dev->parent;
+ int error = -ENODEV;
+
+ while (ancestor && !ancestor->power.ignore_children)
+ ancestor = ancestor->parent;
+
+ if (ancestor)
+ error = dev_pm_qos_add_request(ancestor, req, value);
+
+ if (error < 0)
+ req->dev = NULL;
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
+
+#ifdef CONFIG_PM_RUNTIME
+static void __dev_pm_qos_drop_user_request(struct device *dev)
+{
+ dev_pm_qos_remove_request(dev->power.pq_req);
+ dev->power.pq_req = 0;
+}
+
+/**
+ * dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space.
+ * @dev: Device whose PM QoS latency limit is to be exposed to user space.
+ * @value: Initial value of the latency limit.
+ */
+int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
+{
+ struct dev_pm_qos_request *req;
+ int ret;
+
+ if (!device_is_registered(dev) || value < 0)
+ return -EINVAL;
+
+ if (dev->power.pq_req)
+ return -EEXIST;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ ret = dev_pm_qos_add_request(dev, req, value);
+ if (ret < 0)
+ return ret;
+
+ dev->power.pq_req = req;
+ ret = pm_qos_sysfs_add(dev);
+ if (ret)
+ __dev_pm_qos_drop_user_request(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
+
+/**
+ * dev_pm_qos_hide_latency_limit - Hide PM QoS latency limit from user space.
+ * @dev: Device whose PM QoS latency limit is to be hidden from user space.
+ */
+void dev_pm_qos_hide_latency_limit(struct device *dev)
+{
+ if (dev->power.pq_req) {
+ pm_qos_sysfs_remove(dev);
+ __dev_pm_qos_drop_user_request(dev);
+ }
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
+#endif /* CONFIG_PM_RUNTIME */
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/runtime.c b/ap/os/linux/linux-3.4.x/drivers/base/power/runtime.c
new file mode 100644
index 0000000..b6e9d9b
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/runtime.c
@@ -0,0 +1,1318 @@
+/*
+ * drivers/base/power/runtime.c - Helper functions for device runtime PM
+ *
+ * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ * Copyright (C) 2010 Alan Stern <stern@rowland.harvard.edu>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/sched.h>
+#include <linux/export.h>
+#include <linux/pm_runtime.h>
+#include <trace/events/rpm.h>
+#include "power.h"
+
+static int rpm_resume(struct device *dev, int rpmflags);
+static int rpm_suspend(struct device *dev, int rpmflags);
+
+/**
+ * update_pm_runtime_accounting - Update the time accounting of power states
+ * @dev: Device to update the accounting for
+ *
+ * In order to be able to have time accounting of the various power states
+ * (as used by programs such as PowerTOP to show the effectiveness of runtime
+ * PM), we need to track the time spent in each state.
+ * update_pm_runtime_accounting must be called each time before the
+ * runtime_status field is updated, to account the time in the old state
+ * correctly.
+ */
+void update_pm_runtime_accounting(struct device *dev)
+{
+ unsigned long now = jiffies;
+ unsigned long delta;
+
+ delta = now - dev->power.accounting_timestamp;
+
+ dev->power.accounting_timestamp = now;
+
+ if (dev->power.disable_depth > 0)
+ return;
+
+ if (dev->power.runtime_status == RPM_SUSPENDED)
+ dev->power.suspended_jiffies += delta;
+ else
+ dev->power.active_jiffies += delta;
+}
+
+static void __update_runtime_status(struct device *dev, enum rpm_status status)
+{
+ update_pm_runtime_accounting(dev);
+ dev->power.runtime_status = status;
+}
+
+/**
+ * pm_runtime_deactivate_timer - Deactivate given device's suspend timer.
+ * @dev: Device to handle.
+ */
+static void pm_runtime_deactivate_timer(struct device *dev)
+{
+ if (dev->power.timer_expires > 0) {
+ del_timer(&dev->power.suspend_timer);
+ dev->power.timer_expires = 0;
+ }
+}
+
+/**
+ * pm_runtime_cancel_pending - Deactivate suspend timer and cancel requests.
+ * @dev: Device to handle.
+ */
+static void pm_runtime_cancel_pending(struct device *dev)
+{
+ pm_runtime_deactivate_timer(dev);
+ /*
+ * In case there's a request pending, make sure its work function will
+ * return without doing anything.
+ */
+ dev->power.request = RPM_REQ_NONE;
+}
+
+/*
+ * pm_runtime_autosuspend_expiration - Get a device's autosuspend-delay expiration time.
+ * @dev: Device to handle.
+ *
+ * Compute the autosuspend-delay expiration time based on the device's
+ * power.last_busy time. If the delay has already expired or is disabled
+ * (negative) or the power.use_autosuspend flag isn't set, return 0.
+ * Otherwise return the expiration time in jiffies (adjusted to be nonzero).
+ *
+ * This function may be called either with or without dev->power.lock held.
+ * Either way it can be racy, since power.last_busy may be updated at any time.
+ */
+unsigned long pm_runtime_autosuspend_expiration(struct device *dev)
+{
+ int autosuspend_delay;
+ long elapsed;
+ unsigned long last_busy;
+ unsigned long expires = 0;
+
+ if (!dev->power.use_autosuspend)
+ goto out;
+
+ autosuspend_delay = ACCESS_ONCE(dev->power.autosuspend_delay);
+ if (autosuspend_delay < 0)
+ goto out;
+
+ last_busy = ACCESS_ONCE(dev->power.last_busy);
+ elapsed = jiffies - last_busy;
+ if (elapsed < 0)
+ goto out; /* jiffies has wrapped around. */
+
+ /*
+ * If the autosuspend_delay is >= 1 second, align the timer by rounding
+ * up to the nearest second.
+ */
+ expires = last_busy + msecs_to_jiffies(autosuspend_delay);
+ if (autosuspend_delay >= 1000)
+ expires = round_jiffies(expires);
+ expires += !expires;
+ if (elapsed >= expires - last_busy)
+ expires = 0; /* Already expired. */
+
+ out:
+ return expires;
+}
+EXPORT_SYMBOL_GPL(pm_runtime_autosuspend_expiration);
+
+/**
+ * rpm_check_suspend_allowed - Test whether a device may be suspended.
+ * @dev: Device to test.
+ */
+static int rpm_check_suspend_allowed(struct device *dev)
+{
+ int retval = 0;
+
+ if (dev->power.runtime_error)
+ retval = -EINVAL;
+ else if (dev->power.disable_depth > 0)
+ retval = -EACCES;
+ else if (atomic_read(&dev->power.usage_count) > 0)
+ retval = -EAGAIN;
+ else if (!pm_children_suspended(dev))
+ retval = -EBUSY;
+
+ /* Pending resume requests take precedence over suspends. */
+ else if ((dev->power.deferred_resume
+ && dev->power.runtime_status == RPM_SUSPENDING)
+ || (dev->power.request_pending
+ && dev->power.request == RPM_REQ_RESUME))
+ retval = -EAGAIN;
+ else if (dev->power.runtime_status == RPM_SUSPENDED)
+ retval = 1;
+
+ return retval;
+}
+
+/**
+ * __rpm_callback - Run a given runtime PM callback for a given device.
+ * @cb: Runtime PM callback to run.
+ * @dev: Device to run the callback for.
+ */
+static int __rpm_callback(int (*cb)(struct device *), struct device *dev)
+ __releases(&dev->power.lock) __acquires(&dev->power.lock)
+{
+ int retval;
+
+ if (dev->power.irq_safe)
+ spin_unlock(&dev->power.lock);
+ else
+ spin_unlock_irq(&dev->power.lock);
+
+ retval = cb(dev);
+
+ if (dev->power.irq_safe)
+ spin_lock(&dev->power.lock);
+ else
+ spin_lock_irq(&dev->power.lock);
+
+ return retval;
+}
+
+/**
+ * rpm_idle - Notify device bus type if the device can be suspended.
+ * @dev: Device to notify the bus type about.
+ * @rpmflags: Flag bits.
+ *
+ * Check if the device's runtime PM status allows it to be suspended. If
+ * another idle notification has been started earlier, return immediately. If
+ * the RPM_ASYNC flag is set then queue an idle-notification request; otherwise
+ * run the ->runtime_idle() callback directly.
+ *
+ * This function must be called under dev->power.lock with interrupts disabled.
+ */
+static int rpm_idle(struct device *dev, int rpmflags)
+{
+ int (*callback)(struct device *);
+ int retval;
+
+ trace_rpm_idle(dev, rpmflags);
+ retval = rpm_check_suspend_allowed(dev);
+ if (retval < 0)
+ ; /* Conditions are wrong. */
+
+ /* Idle notifications are allowed only in the RPM_ACTIVE state. */
+ else if (dev->power.runtime_status != RPM_ACTIVE)
+ retval = -EAGAIN;
+
+ /*
+ * Any pending request other than an idle notification takes
+ * precedence over us, except that the timer may be running.
+ */
+ else if (dev->power.request_pending &&
+ dev->power.request > RPM_REQ_IDLE)
+ retval = -EAGAIN;
+
+ /* Act as though RPM_NOWAIT is always set. */
+ else if (dev->power.idle_notification)
+ retval = -EINPROGRESS;
+ if (retval)
+ goto out;
+
+ /* Pending requests need to be canceled. */
+ dev->power.request = RPM_REQ_NONE;
+
+ if (dev->power.no_callbacks) {
+ /* Assume ->runtime_idle() callback would have suspended. */
+ retval = rpm_suspend(dev, rpmflags);
+ goto out;
+ }
+
+ /* Carry out an asynchronous or a synchronous idle notification. */
+ if (rpmflags & RPM_ASYNC) {
+ dev->power.request = RPM_REQ_IDLE;
+ if (!dev->power.request_pending) {
+ dev->power.request_pending = true;
+ queue_work(pm_wq, &dev->power.work);
+ }
+ goto out;
+ }
+
+ dev->power.idle_notification = true;
+
+ if (dev->pm_domain)
+ callback = dev->pm_domain->ops.runtime_idle;
+ else if (dev->type && dev->type->pm)
+ callback = dev->type->pm->runtime_idle;
+ else if (dev->class && dev->class->pm)
+ callback = dev->class->pm->runtime_idle;
+ else if (dev->bus && dev->bus->pm)
+ callback = dev->bus->pm->runtime_idle;
+ else
+ callback = NULL;
+
+ if (!callback && dev->driver && dev->driver->pm)
+ callback = dev->driver->pm->runtime_idle;
+
+ if (callback)
+ __rpm_callback(callback, dev);
+
+ dev->power.idle_notification = false;
+ wake_up_all(&dev->power.wait_queue);
+
+ out:
+ trace_rpm_return_int(dev, _THIS_IP_, retval);
+ return retval;
+}
+
+/**
+ * rpm_callback - Run a given runtime PM callback for a given device.
+ * @cb: Runtime PM callback to run.
+ * @dev: Device to run the callback for.
+ */
+static int rpm_callback(int (*cb)(struct device *), struct device *dev)
+{
+ int retval;
+
+ if (!cb)
+ return -ENOSYS;
+
+ retval = __rpm_callback(cb, dev);
+
+ dev->power.runtime_error = retval;
+ return retval != -EACCES ? retval : -EIO;
+}
+
+/**
+ * rpm_suspend - Carry out runtime suspend of given device.
+ * @dev: Device to suspend.
+ * @rpmflags: Flag bits.
+ *
+ * Check if the device's runtime PM status allows it to be suspended.
+ * Cancel a pending idle notification, autosuspend or suspend. If
+ * another suspend has been started earlier, either return immediately
+ * or wait for it to finish, depending on the RPM_NOWAIT and RPM_ASYNC
+ * flags. If the RPM_ASYNC flag is set then queue a suspend request;
+ * otherwise run the ->runtime_suspend() callback directly. When
+ * ->runtime_suspend succeeded, if a deferred resume was requested while
+ * the callback was running then carry it out, otherwise send an idle
+ * notification for its parent (if the suspend succeeded and both
+ * ignore_children of parent->power and irq_safe of dev->power are not set).
+ * If ->runtime_suspend failed with -EAGAIN or -EBUSY, and if the RPM_AUTO
+ * flag is set and the next autosuspend-delay expiration time is in the
+ * future, schedule another autosuspend attempt.
+ *
+ * This function must be called under dev->power.lock with interrupts disabled.
+ */
+static int rpm_suspend(struct device *dev, int rpmflags)
+ __releases(&dev->power.lock) __acquires(&dev->power.lock)
+{
+ int (*callback)(struct device *);
+ struct device *parent = NULL;
+ int retval;
+
+ trace_rpm_suspend(dev, rpmflags);
+
+ repeat:
+ retval = rpm_check_suspend_allowed(dev);
+
+ if (retval < 0)
+ ; /* Conditions are wrong. */
+
+ /* Synchronous suspends are not allowed in the RPM_RESUMING state. */
+ else if (dev->power.runtime_status == RPM_RESUMING &&
+ !(rpmflags & RPM_ASYNC))
+ retval = -EAGAIN;
+ if (retval)
+ goto out;
+
+ /* If the autosuspend_delay time hasn't expired yet, reschedule. */
+ if ((rpmflags & RPM_AUTO)
+ && dev->power.runtime_status != RPM_SUSPENDING) {
+ unsigned long expires = pm_runtime_autosuspend_expiration(dev);
+
+ if (expires != 0) {
+ /* Pending requests need to be canceled. */
+ dev->power.request = RPM_REQ_NONE;
+
+ /*
+ * Optimization: If the timer is already running and is
+ * set to expire at or before the autosuspend delay,
+ * avoid the overhead of resetting it. Just let it
+ * expire; pm_suspend_timer_fn() will take care of the
+ * rest.
+ */
+ if (!(dev->power.timer_expires && time_before_eq(
+ dev->power.timer_expires, expires))) {
+ dev->power.timer_expires = expires;
+ mod_timer(&dev->power.suspend_timer, expires);
+ }
+ dev->power.timer_autosuspends = 1;
+ goto out;
+ }
+ }
+
+ /* Other scheduled or pending requests need to be canceled. */
+ pm_runtime_cancel_pending(dev);
+
+ if (dev->power.runtime_status == RPM_SUSPENDING) {
+ DEFINE_WAIT(wait);
+
+ if (rpmflags & (RPM_ASYNC | RPM_NOWAIT)) {
+ retval = -EINPROGRESS;
+ goto out;
+ }
+
+ if (dev->power.irq_safe) {
+ spin_unlock(&dev->power.lock);
+
+ cpu_relax();
+
+ spin_lock(&dev->power.lock);
+ goto repeat;
+ }
+
+ /* Wait for the other suspend running in parallel with us. */
+ for (;;) {
+ prepare_to_wait(&dev->power.wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (dev->power.runtime_status != RPM_SUSPENDING)
+ break;
+
+ spin_unlock_irq(&dev->power.lock);
+
+ schedule();
+
+ spin_lock_irq(&dev->power.lock);
+ }
+ finish_wait(&dev->power.wait_queue, &wait);
+ goto repeat;
+ }
+
+ if (dev->power.no_callbacks)
+ goto no_callback; /* Assume success. */
+
+ /* Carry out an asynchronous or a synchronous suspend. */
+ if (rpmflags & RPM_ASYNC) {
+ dev->power.request = (rpmflags & RPM_AUTO) ?
+ RPM_REQ_AUTOSUSPEND : RPM_REQ_SUSPEND;
+ if (!dev->power.request_pending) {
+ dev->power.request_pending = true;
+ queue_work(pm_wq, &dev->power.work);
+ }
+ goto out;
+ }
+
+ if (__dev_pm_qos_read_value(dev) < 0) {
+ /* Negative PM QoS constraint means "never suspend". */
+ retval = -EPERM;
+ goto out;
+ }
+
+ __update_runtime_status(dev, RPM_SUSPENDING);
+
+ if (dev->pm_domain)
+ callback = dev->pm_domain->ops.runtime_suspend;
+ else if (dev->type && dev->type->pm)
+ callback = dev->type->pm->runtime_suspend;
+ else if (dev->class && dev->class->pm)
+ callback = dev->class->pm->runtime_suspend;
+ else if (dev->bus && dev->bus->pm)
+ callback = dev->bus->pm->runtime_suspend;
+ else
+ callback = NULL;
+
+ if (!callback && dev->driver && dev->driver->pm)
+ callback = dev->driver->pm->runtime_suspend;
+
+ retval = rpm_callback(callback, dev);
+ if (retval)
+ goto fail;
+
+ no_callback:
+ __update_runtime_status(dev, RPM_SUSPENDED);
+ pm_runtime_deactivate_timer(dev);
+
+ if (dev->parent) {
+ parent = dev->parent;
+ atomic_add_unless(&parent->power.child_count, -1, 0);
+ }
+ wake_up_all(&dev->power.wait_queue);
+
+ if (dev->power.deferred_resume) {
+ dev->power.deferred_resume = false;
+ rpm_resume(dev, 0);
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ /* Maybe the parent is now able to suspend. */
+ if (parent && !parent->power.ignore_children && !dev->power.irq_safe) {
+ spin_unlock(&dev->power.lock);
+
+ spin_lock(&parent->power.lock);
+ rpm_idle(parent, RPM_ASYNC);
+ spin_unlock(&parent->power.lock);
+
+ spin_lock(&dev->power.lock);
+ }
+
+ out:
+ trace_rpm_return_int(dev, _THIS_IP_, retval);
+
+ return retval;
+
+ fail:
+ __update_runtime_status(dev, RPM_ACTIVE);
+ dev->power.deferred_resume = false;
+ wake_up_all(&dev->power.wait_queue);
+
+ if (retval == -EAGAIN || retval == -EBUSY) {
+ dev->power.runtime_error = 0;
+
+ /*
+ * If the callback routine failed an autosuspend, and
+ * if the last_busy time has been updated so that there
+ * is a new autosuspend expiration time, automatically
+ * reschedule another autosuspend.
+ */
+ if ((rpmflags & RPM_AUTO) &&
+ pm_runtime_autosuspend_expiration(dev) != 0)
+ goto repeat;
+ } else {
+ pm_runtime_cancel_pending(dev);
+ }
+ goto out;
+}
+
+/**
+ * rpm_resume - Carry out runtime resume of given device.
+ * @dev: Device to resume.
+ * @rpmflags: Flag bits.
+ *
+ * Check if the device's runtime PM status allows it to be resumed. Cancel
+ * any scheduled or pending requests. If another resume has been started
+ * earlier, either return immediately or wait for it to finish, depending on the
+ * RPM_NOWAIT and RPM_ASYNC flags. Similarly, if there's a suspend running in
+ * parallel with this function, either tell the other process to resume after
+ * suspending (deferred_resume) or wait for it to finish. If the RPM_ASYNC
+ * flag is set then queue a resume request; otherwise run the
+ * ->runtime_resume() callback directly. Queue an idle notification for the
+ * device if the resume succeeded.
+ *
+ * This function must be called under dev->power.lock with interrupts disabled.
+ */
+static int rpm_resume(struct device *dev, int rpmflags)
+ __releases(&dev->power.lock) __acquires(&dev->power.lock)
+{
+ int (*callback)(struct device *);
+ struct device *parent = NULL;
+ int retval = 0;
+
+ trace_rpm_resume(dev, rpmflags);
+
+ repeat:
+ if (dev->power.runtime_error)
+ retval = -EINVAL;
+ else if (dev->power.disable_depth > 0)
+ retval = -EACCES;
+ if (retval)
+ goto out;
+
+ /*
+ * Other scheduled or pending requests need to be canceled. Small
+ * optimization: If an autosuspend timer is running, leave it running
+ * rather than cancelling it now only to restart it again in the near
+ * future.
+ */
+ dev->power.request = RPM_REQ_NONE;
+ if (!dev->power.timer_autosuspends)
+ pm_runtime_deactivate_timer(dev);
+
+ if (dev->power.runtime_status == RPM_ACTIVE) {
+ retval = 1;
+ goto out;
+ }
+
+ if (dev->power.runtime_status == RPM_RESUMING
+ || dev->power.runtime_status == RPM_SUSPENDING) {
+ DEFINE_WAIT(wait);
+
+ if (rpmflags & (RPM_ASYNC | RPM_NOWAIT)) {
+ if (dev->power.runtime_status == RPM_SUSPENDING)
+ dev->power.deferred_resume = true;
+ else
+ retval = -EINPROGRESS;
+ goto out;
+ }
+
+ if (dev->power.irq_safe) {
+ spin_unlock(&dev->power.lock);
+
+ cpu_relax();
+
+ spin_lock(&dev->power.lock);
+ goto repeat;
+ }
+
+ /* Wait for the operation carried out in parallel with us. */
+ for (;;) {
+ prepare_to_wait(&dev->power.wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (dev->power.runtime_status != RPM_RESUMING
+ && dev->power.runtime_status != RPM_SUSPENDING)
+ break;
+
+ spin_unlock_irq(&dev->power.lock);
+
+ schedule();
+
+ spin_lock_irq(&dev->power.lock);
+ }
+ finish_wait(&dev->power.wait_queue, &wait);
+ goto repeat;
+ }
+
+ /*
+ * See if we can skip waking up the parent. This is safe only if
+ * power.no_callbacks is set, because otherwise we don't know whether
+ * the resume will actually succeed.
+ */
+ if (dev->power.no_callbacks && !parent && dev->parent) {
+ spin_lock_nested(&dev->parent->power.lock, SINGLE_DEPTH_NESTING);
+ if (dev->parent->power.disable_depth > 0
+ || dev->parent->power.ignore_children
+ || dev->parent->power.runtime_status == RPM_ACTIVE) {
+ atomic_inc(&dev->parent->power.child_count);
+ spin_unlock(&dev->parent->power.lock);
+ retval = 1;
+ goto no_callback; /* Assume success. */
+ }
+ spin_unlock(&dev->parent->power.lock);
+ }
+
+ /* Carry out an asynchronous or a synchronous resume. */
+ if (rpmflags & RPM_ASYNC) {
+ dev->power.request = RPM_REQ_RESUME;
+ if (!dev->power.request_pending) {
+ dev->power.request_pending = true;
+ queue_work(pm_wq, &dev->power.work);
+ }
+ retval = 0;
+ goto out;
+ }
+
+ if (!parent && dev->parent) {
+ /*
+ * Increment the parent's usage counter and resume it if
+ * necessary. Not needed if dev is irq-safe; then the
+ * parent is permanently resumed.
+ */
+ parent = dev->parent;
+ if (dev->power.irq_safe)
+ goto skip_parent;
+ spin_unlock(&dev->power.lock);
+
+ pm_runtime_get_noresume(parent);
+
+ spin_lock(&parent->power.lock);
+ /*
+ * We can resume if the parent's runtime PM is disabled or it
+ * is set to ignore children.
+ */
+ if (!parent->power.disable_depth
+ && !parent->power.ignore_children) {
+ rpm_resume(parent, 0);
+ if (parent->power.runtime_status != RPM_ACTIVE)
+ retval = -EBUSY;
+ }
+ spin_unlock(&parent->power.lock);
+
+ spin_lock(&dev->power.lock);
+ if (retval)
+ goto out;
+ goto repeat;
+ }
+ skip_parent:
+
+ if (dev->power.no_callbacks)
+ goto no_callback; /* Assume success. */
+
+ __update_runtime_status(dev, RPM_RESUMING);
+
+ if (dev->pm_domain)
+ callback = dev->pm_domain->ops.runtime_resume;
+ else if (dev->type && dev->type->pm)
+ callback = dev->type->pm->runtime_resume;
+ else if (dev->class && dev->class->pm)
+ callback = dev->class->pm->runtime_resume;
+ else if (dev->bus && dev->bus->pm)
+ callback = dev->bus->pm->runtime_resume;
+ else
+ callback = NULL;
+
+ if (!callback && dev->driver && dev->driver->pm)
+ callback = dev->driver->pm->runtime_resume;
+
+ retval = rpm_callback(callback, dev);
+ if (retval) {
+ __update_runtime_status(dev, RPM_SUSPENDED);
+ pm_runtime_cancel_pending(dev);
+ } else {
+ no_callback:
+ __update_runtime_status(dev, RPM_ACTIVE);
+ if (parent)
+ atomic_inc(&parent->power.child_count);
+ }
+ wake_up_all(&dev->power.wait_queue);
+
+ if (retval >= 0)
+ rpm_idle(dev, RPM_ASYNC);
+
+ out:
+ if (parent && !dev->power.irq_safe) {
+ spin_unlock_irq(&dev->power.lock);
+
+ pm_runtime_put(parent);
+
+ spin_lock_irq(&dev->power.lock);
+ }
+
+ trace_rpm_return_int(dev, _THIS_IP_, retval);
+
+ return retval;
+}
+
+/**
+ * pm_runtime_work - Universal runtime PM work function.
+ * @work: Work structure used for scheduling the execution of this function.
+ *
+ * Use @work to get the device object the work is to be done for, determine what
+ * is to be done and execute the appropriate runtime PM function.
+ */
+static void pm_runtime_work(struct work_struct *work)
+{
+ struct device *dev = container_of(work, struct device, power.work);
+ enum rpm_request req;
+
+ spin_lock_irq(&dev->power.lock);
+
+ if (!dev->power.request_pending)
+ goto out;
+
+ req = dev->power.request;
+ dev->power.request = RPM_REQ_NONE;
+ dev->power.request_pending = false;
+
+ switch (req) {
+ case RPM_REQ_NONE:
+ break;
+ case RPM_REQ_IDLE:
+ rpm_idle(dev, RPM_NOWAIT);
+ break;
+ case RPM_REQ_SUSPEND:
+ rpm_suspend(dev, RPM_NOWAIT);
+ break;
+ case RPM_REQ_AUTOSUSPEND:
+ rpm_suspend(dev, RPM_NOWAIT | RPM_AUTO);
+ break;
+ case RPM_REQ_RESUME:
+ rpm_resume(dev, RPM_NOWAIT);
+ break;
+ }
+
+ out:
+ spin_unlock_irq(&dev->power.lock);
+}
+
+/**
+ * pm_suspend_timer_fn - Timer function for pm_schedule_suspend().
+ * @data: Device pointer passed by pm_schedule_suspend().
+ *
+ * Check if the time is right and queue a suspend request.
+ */
+static void pm_suspend_timer_fn(unsigned long data)
+{
+ struct device *dev = (struct device *)data;
+ unsigned long flags;
+ unsigned long expires;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ expires = dev->power.timer_expires;
+ /* If 'expire' is after 'jiffies' we've been called too early. */
+ if (expires > 0 && !time_after(expires, jiffies)) {
+ dev->power.timer_expires = 0;
+ rpm_suspend(dev, dev->power.timer_autosuspends ?
+ (RPM_ASYNC | RPM_AUTO) : RPM_ASYNC);
+ }
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+
+/**
+ * pm_schedule_suspend - Set up a timer to submit a suspend request in future.
+ * @dev: Device to suspend.
+ * @delay: Time to wait before submitting a suspend request, in milliseconds.
+ */
+int pm_schedule_suspend(struct device *dev, unsigned int delay)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (!delay) {
+ retval = rpm_suspend(dev, RPM_ASYNC);
+ goto out;
+ }
+
+ retval = rpm_check_suspend_allowed(dev);
+ if (retval)
+ goto out;
+
+ /* Other scheduled or pending requests need to be canceled. */
+ pm_runtime_cancel_pending(dev);
+
+ dev->power.timer_expires = jiffies + msecs_to_jiffies(delay);
+ dev->power.timer_expires += !dev->power.timer_expires;
+ dev->power.timer_autosuspends = 0;
+ mod_timer(&dev->power.suspend_timer, dev->power.timer_expires);
+
+ out:
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(pm_schedule_suspend);
+
+/**
+ * __pm_runtime_idle - Entry point for runtime idle operations.
+ * @dev: Device to send idle notification for.
+ * @rpmflags: Flag bits.
+ *
+ * If the RPM_GET_PUT flag is set, decrement the device's usage count and
+ * return immediately if it is larger than zero. Then carry out an idle
+ * notification, either synchronous or asynchronous.
+ *
+ * This routine may be called in atomic context if the RPM_ASYNC flag is set,
+ * or if pm_runtime_irq_safe() has been called.
+ */
+int __pm_runtime_idle(struct device *dev, int rpmflags)
+{
+ unsigned long flags;
+ int retval;
+
+ might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
+
+ if (rpmflags & RPM_GET_PUT) {
+ if (!atomic_dec_and_test(&dev->power.usage_count))
+ return 0;
+ }
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+ retval = rpm_idle(dev, rpmflags);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_idle);
+
+/**
+ * __pm_runtime_suspend - Entry point for runtime put/suspend operations.
+ * @dev: Device to suspend.
+ * @rpmflags: Flag bits.
+ *
+ * If the RPM_GET_PUT flag is set, decrement the device's usage count and
+ * return immediately if it is larger than zero. Then carry out a suspend,
+ * either synchronous or asynchronous.
+ *
+ * This routine may be called in atomic context if the RPM_ASYNC flag is set,
+ * or if pm_runtime_irq_safe() has been called.
+ */
+int __pm_runtime_suspend(struct device *dev, int rpmflags)
+{
+ unsigned long flags;
+ int retval;
+
+ might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
+
+ if (rpmflags & RPM_GET_PUT) {
+ if (!atomic_dec_and_test(&dev->power.usage_count))
+ return 0;
+ }
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+ retval = rpm_suspend(dev, rpmflags);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_suspend);
+
+/**
+ * __pm_runtime_resume - Entry point for runtime resume operations.
+ * @dev: Device to resume.
+ * @rpmflags: Flag bits.
+ *
+ * If the RPM_GET_PUT flag is set, increment the device's usage count. Then
+ * carry out a resume, either synchronous or asynchronous.
+ *
+ * This routine may be called in atomic context if the RPM_ASYNC flag is set,
+ * or if pm_runtime_irq_safe() has been called.
+ */
+int __pm_runtime_resume(struct device *dev, int rpmflags)
+{
+ unsigned long flags;
+ int retval;
+
+ might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
+
+ if (rpmflags & RPM_GET_PUT)
+ atomic_inc(&dev->power.usage_count);
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+ retval = rpm_resume(dev, rpmflags);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_resume);
+
+/**
+ * __pm_runtime_set_status - Set runtime PM status of a device.
+ * @dev: Device to handle.
+ * @status: New runtime PM status of the device.
+ *
+ * If runtime PM of the device is disabled or its power.runtime_error field is
+ * different from zero, the status may be changed either to RPM_ACTIVE, or to
+ * RPM_SUSPENDED, as long as that reflects the actual state of the device.
+ * However, if the device has a parent and the parent is not active, and the
+ * parent's power.ignore_children flag is unset, the device's status cannot be
+ * set to RPM_ACTIVE, so -EBUSY is returned in that case.
+ *
+ * If successful, __pm_runtime_set_status() clears the power.runtime_error field
+ * and the device parent's counter of unsuspended children is modified to
+ * reflect the new status. If the new status is RPM_SUSPENDED, an idle
+ * notification request for the parent is submitted.
+ */
+int __pm_runtime_set_status(struct device *dev, unsigned int status)
+{
+ struct device *parent = dev->parent;
+ unsigned long flags;
+ bool notify_parent = false;
+ int error = 0;
+
+ if (status != RPM_ACTIVE && status != RPM_SUSPENDED)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (!dev->power.runtime_error && !dev->power.disable_depth) {
+ error = -EAGAIN;
+ goto out;
+ }
+
+ if (dev->power.runtime_status == status)
+ goto out_set;
+
+ if (status == RPM_SUSPENDED) {
+ /* It always is possible to set the status to 'suspended'. */
+ if (parent) {
+ atomic_add_unless(&parent->power.child_count, -1, 0);
+ notify_parent = !parent->power.ignore_children;
+ }
+ goto out_set;
+ }
+
+ if (parent) {
+ spin_lock_nested(&parent->power.lock, SINGLE_DEPTH_NESTING);
+
+ /*
+ * It is invalid to put an active child under a parent that is
+ * not active, has runtime PM enabled and the
+ * 'power.ignore_children' flag unset.
+ */
+ if (!parent->power.disable_depth
+ && !parent->power.ignore_children
+ && parent->power.runtime_status != RPM_ACTIVE)
+ error = -EBUSY;
+ else if (dev->power.runtime_status == RPM_SUSPENDED)
+ atomic_inc(&parent->power.child_count);
+
+ spin_unlock(&parent->power.lock);
+
+ if (error)
+ goto out;
+ }
+
+ out_set:
+ __update_runtime_status(dev, status);
+ dev->power.runtime_error = 0;
+ out:
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ if (notify_parent)
+ pm_request_idle(parent);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_set_status);
+
+/**
+ * __pm_runtime_barrier - Cancel pending requests and wait for completions.
+ * @dev: Device to handle.
+ *
+ * Flush all pending requests for the device from pm_wq and wait for all
+ * runtime PM operations involving the device in progress to complete.
+ *
+ * Should be called under dev->power.lock with interrupts disabled.
+ */
+static void __pm_runtime_barrier(struct device *dev)
+{
+ pm_runtime_deactivate_timer(dev);
+
+ if (dev->power.request_pending) {
+ dev->power.request = RPM_REQ_NONE;
+ spin_unlock_irq(&dev->power.lock);
+
+ cancel_work_sync(&dev->power.work);
+
+ spin_lock_irq(&dev->power.lock);
+ dev->power.request_pending = false;
+ }
+
+ if (dev->power.runtime_status == RPM_SUSPENDING
+ || dev->power.runtime_status == RPM_RESUMING
+ || dev->power.idle_notification) {
+ DEFINE_WAIT(wait);
+
+ /* Suspend, wake-up or idle notification in progress. */
+ for (;;) {
+ prepare_to_wait(&dev->power.wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (dev->power.runtime_status != RPM_SUSPENDING
+ && dev->power.runtime_status != RPM_RESUMING
+ && !dev->power.idle_notification)
+ break;
+ spin_unlock_irq(&dev->power.lock);
+
+ schedule();
+
+ spin_lock_irq(&dev->power.lock);
+ }
+ finish_wait(&dev->power.wait_queue, &wait);
+ }
+}
+
+/**
+ * pm_runtime_barrier - Flush pending requests and wait for completions.
+ * @dev: Device to handle.
+ *
+ * Prevent the device from being suspended by incrementing its usage counter and
+ * if there's a pending resume request for the device, wake the device up.
+ * Next, make sure that all pending requests for the device have been flushed
+ * from pm_wq and wait for all runtime PM operations involving the device in
+ * progress to complete.
+ *
+ * Return value:
+ * 1, if there was a resume request pending and the device had to be woken up,
+ * 0, otherwise
+ */
+int pm_runtime_barrier(struct device *dev)
+{
+ int retval = 0;
+
+ pm_runtime_get_noresume(dev);
+ spin_lock_irq(&dev->power.lock);
+
+ if (dev->power.request_pending
+ && dev->power.request == RPM_REQ_RESUME) {
+ rpm_resume(dev, 0);
+ retval = 1;
+ }
+
+ __pm_runtime_barrier(dev);
+
+ spin_unlock_irq(&dev->power.lock);
+ pm_runtime_put_noidle(dev);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(pm_runtime_barrier);
+
+/**
+ * __pm_runtime_disable - Disable runtime PM of a device.
+ * @dev: Device to handle.
+ * @check_resume: If set, check if there's a resume request for the device.
+ *
+ * Increment power.disable_depth for the device and if was zero previously,
+ * cancel all pending runtime PM requests for the device and wait for all
+ * operations in progress to complete. The device can be either active or
+ * suspended after its runtime PM has been disabled.
+ *
+ * If @check_resume is set and there's a resume request pending when
+ * __pm_runtime_disable() is called and power.disable_depth is zero, the
+ * function will wake up the device before disabling its runtime PM.
+ */
+void __pm_runtime_disable(struct device *dev, bool check_resume)
+{
+ spin_lock_irq(&dev->power.lock);
+
+ if (dev->power.disable_depth > 0) {
+ dev->power.disable_depth++;
+ goto out;
+ }
+
+ /*
+ * Wake up the device if there's a resume request pending, because that
+ * means there probably is some I/O to process and disabling runtime PM
+ * shouldn't prevent the device from processing the I/O.
+ */
+ if (check_resume && dev->power.request_pending
+ && dev->power.request == RPM_REQ_RESUME) {
+ /*
+ * Prevent suspends and idle notifications from being carried
+ * out after we have woken up the device.
+ */
+ pm_runtime_get_noresume(dev);
+
+ rpm_resume(dev, 0);
+
+ pm_runtime_put_noidle(dev);
+ }
+
+ if (!dev->power.disable_depth++)
+ __pm_runtime_barrier(dev);
+
+ out:
+ spin_unlock_irq(&dev->power.lock);
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_disable);
+
+/**
+ * pm_runtime_enable - Enable runtime PM of a device.
+ * @dev: Device to handle.
+ */
+void pm_runtime_enable(struct device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (dev->power.disable_depth > 0)
+ dev->power.disable_depth--;
+ else
+ dev_warn(dev, "Unbalanced %s!\n", __func__);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_enable);
+
+/**
+ * pm_runtime_forbid - Block runtime PM of a device.
+ * @dev: Device to handle.
+ *
+ * Increase the device's usage count and clear its power.runtime_auto flag,
+ * so that it cannot be suspended at run time until pm_runtime_allow() is called
+ * for it.
+ */
+void pm_runtime_forbid(struct device *dev)
+{
+ spin_lock_irq(&dev->power.lock);
+ if (!dev->power.runtime_auto)
+ goto out;
+
+ dev->power.runtime_auto = false;
+ atomic_inc(&dev->power.usage_count);
+ rpm_resume(dev, 0);
+
+ out:
+ spin_unlock_irq(&dev->power.lock);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_forbid);
+
+/**
+ * pm_runtime_allow - Unblock runtime PM of a device.
+ * @dev: Device to handle.
+ *
+ * Decrease the device's usage count and set its power.runtime_auto flag.
+ */
+void pm_runtime_allow(struct device *dev)
+{
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.runtime_auto)
+ goto out;
+
+ dev->power.runtime_auto = true;
+ if (atomic_dec_and_test(&dev->power.usage_count))
+ rpm_idle(dev, RPM_AUTO);
+
+ out:
+ spin_unlock_irq(&dev->power.lock);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_allow);
+
+/**
+ * pm_runtime_no_callbacks - Ignore runtime PM callbacks for a device.
+ * @dev: Device to handle.
+ *
+ * Set the power.no_callbacks flag, which tells the PM core that this
+ * device is power-managed through its parent and has no runtime PM
+ * callbacks of its own. The runtime sysfs attributes will be removed.
+ */
+void pm_runtime_no_callbacks(struct device *dev)
+{
+ spin_lock_irq(&dev->power.lock);
+ dev->power.no_callbacks = 1;
+ spin_unlock_irq(&dev->power.lock);
+ if (device_is_registered(dev))
+ rpm_sysfs_remove(dev);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_no_callbacks);
+
+/**
+ * pm_runtime_irq_safe - Leave interrupts disabled during callbacks.
+ * @dev: Device to handle
+ *
+ * Set the power.irq_safe flag, which tells the PM core that the
+ * ->runtime_suspend() and ->runtime_resume() callbacks for this device should
+ * always be invoked with the spinlock held and interrupts disabled. It also
+ * causes the parent's usage counter to be permanently incremented, preventing
+ * the parent from runtime suspending -- otherwise an irq-safe child might have
+ * to wait for a non-irq-safe parent.
+ */
+void pm_runtime_irq_safe(struct device *dev)
+{
+ if (dev->parent)
+ pm_runtime_get_sync(dev->parent);
+ spin_lock_irq(&dev->power.lock);
+ dev->power.irq_safe = 1;
+ spin_unlock_irq(&dev->power.lock);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_irq_safe);
+
+/**
+ * update_autosuspend - Handle a change to a device's autosuspend settings.
+ * @dev: Device to handle.
+ * @old_delay: The former autosuspend_delay value.
+ * @old_use: The former use_autosuspend value.
+ *
+ * Prevent runtime suspend if the new delay is negative and use_autosuspend is
+ * set; otherwise allow it. Send an idle notification if suspends are allowed.
+ *
+ * This function must be called under dev->power.lock with interrupts disabled.
+ */
+static void update_autosuspend(struct device *dev, int old_delay, int old_use)
+{
+ int delay = dev->power.autosuspend_delay;
+
+ /* Should runtime suspend be prevented now? */
+ if (dev->power.use_autosuspend && delay < 0) {
+
+ /* If it used to be allowed then prevent it. */
+ if (!old_use || old_delay >= 0) {
+ atomic_inc(&dev->power.usage_count);
+ rpm_resume(dev, 0);
+ }
+ }
+
+ /* Runtime suspend should be allowed now. */
+ else {
+
+ /* If it used to be prevented then allow it. */
+ if (old_use && old_delay < 0)
+ atomic_dec(&dev->power.usage_count);
+
+ /* Maybe we can autosuspend now. */
+ rpm_idle(dev, RPM_AUTO);
+ }
+}
+
+/**
+ * pm_runtime_set_autosuspend_delay - Set a device's autosuspend_delay value.
+ * @dev: Device to handle.
+ * @delay: Value of the new delay in milliseconds.
+ *
+ * Set the device's power.autosuspend_delay value. If it changes to negative
+ * and the power.use_autosuspend flag is set, prevent runtime suspends. If it
+ * changes the other way, allow runtime suspends.
+ */
+void pm_runtime_set_autosuspend_delay(struct device *dev, int delay)
+{
+ int old_delay, old_use;
+
+ spin_lock_irq(&dev->power.lock);
+ old_delay = dev->power.autosuspend_delay;
+ old_use = dev->power.use_autosuspend;
+ dev->power.autosuspend_delay = delay;
+ update_autosuspend(dev, old_delay, old_use);
+ spin_unlock_irq(&dev->power.lock);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_set_autosuspend_delay);
+
+/**
+ * __pm_runtime_use_autosuspend - Set a device's use_autosuspend flag.
+ * @dev: Device to handle.
+ * @use: New value for use_autosuspend.
+ *
+ * Set the device's power.use_autosuspend flag, and allow or prevent runtime
+ * suspends as needed.
+ */
+void __pm_runtime_use_autosuspend(struct device *dev, bool use)
+{
+ int old_delay, old_use;
+
+ spin_lock_irq(&dev->power.lock);
+ old_delay = dev->power.autosuspend_delay;
+ old_use = dev->power.use_autosuspend;
+ dev->power.use_autosuspend = use;
+ update_autosuspend(dev, old_delay, old_use);
+ spin_unlock_irq(&dev->power.lock);
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_use_autosuspend);
+
+/**
+ * pm_runtime_init - Initialize runtime PM fields in given device object.
+ * @dev: Device object to initialize.
+ */
+void pm_runtime_init(struct device *dev)
+{
+ dev->power.runtime_status = RPM_SUSPENDED;
+ dev->power.idle_notification = false;
+
+ dev->power.disable_depth = 1;
+ atomic_set(&dev->power.usage_count, 0);
+
+ dev->power.runtime_error = 0;
+
+ atomic_set(&dev->power.child_count, 0);
+ pm_suspend_ignore_children(dev, false);
+ dev->power.runtime_auto = true;
+
+ dev->power.request_pending = false;
+ dev->power.request = RPM_REQ_NONE;
+ dev->power.deferred_resume = false;
+ dev->power.accounting_timestamp = jiffies;
+ INIT_WORK(&dev->power.work, pm_runtime_work);
+
+ dev->power.timer_expires = 0;
+ setup_timer(&dev->power.suspend_timer, pm_suspend_timer_fn,
+ (unsigned long)dev);
+
+ init_waitqueue_head(&dev->power.wait_queue);
+}
+
+/**
+ * pm_runtime_remove - Prepare for removing a device from device hierarchy.
+ * @dev: Device object being removed from device hierarchy.
+ */
+void pm_runtime_remove(struct device *dev)
+{
+ __pm_runtime_disable(dev, false);
+
+ /* Change the status back to 'suspended' to match the initial status. */
+ if (dev->power.runtime_status == RPM_ACTIVE)
+ pm_runtime_set_suspended(dev);
+ if (dev->power.irq_safe && dev->parent)
+ pm_runtime_put_sync(dev->parent);
+}
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/sysfs.c b/ap/os/linux/linux-3.4.x/drivers/base/power/sysfs.c
new file mode 100644
index 0000000..48be2ad
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/sysfs.c
@@ -0,0 +1,634 @@
+/*
+ * drivers/base/power/sysfs.c - sysfs entries for device PM
+ */
+
+#include <linux/device.h>
+#include <linux/string.h>
+#include <linux/export.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+#include <linux/atomic.h>
+#include <linux/jiffies.h>
+#include "power.h"
+
+/*
+ * control - Report/change current runtime PM setting of the device
+ *
+ * Runtime power management of a device can be blocked with the help of
+ * this attribute. All devices have one of the following two values for
+ * the power/control file:
+ *
+ * + "auto\n" to allow the device to be power managed at run time;
+ * + "on\n" to prevent the device from being power managed at run time;
+ *
+ * The default for all devices is "auto", which means that devices may be
+ * subject to automatic power management, depending on their drivers.
+ * Changing this attribute to "on" prevents the driver from power managing
+ * the device at run time. Doing that while the device is suspended causes
+ * it to be woken up.
+ *
+ * wakeup - Report/change current wakeup option for device
+ *
+ * Some devices support "wakeup" events, which are hardware signals
+ * used to activate devices from suspended or low power states. Such
+ * devices have one of three values for the sysfs power/wakeup file:
+ *
+ * + "enabled\n" to issue the events;
+ * + "disabled\n" not to do so; or
+ * + "\n" for temporary or permanent inability to issue wakeup.
+ *
+ * (For example, unconfigured USB devices can't issue wakeups.)
+ *
+ * Familiar examples of devices that can issue wakeup events include
+ * keyboards and mice (both PS2 and USB styles), power buttons, modems,
+ * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events
+ * will wake the entire system from a suspend state; others may just
+ * wake up the device (if the system as a whole is already active).
+ * Some wakeup events use normal IRQ lines; other use special out
+ * of band signaling.
+ *
+ * It is the responsibility of device drivers to enable (or disable)
+ * wakeup signaling as part of changing device power states, respecting
+ * the policy choices provided through the driver model.
+ *
+ * Devices may not be able to generate wakeup events from all power
+ * states. Also, the events may be ignored in some configurations;
+ * for example, they might need help from other devices that aren't
+ * active, or which may have wakeup disabled. Some drivers rely on
+ * wakeup events internally (unless they are disabled), keeping
+ * their hardware in low power modes whenever they're unused. This
+ * saves runtime power, without requiring system-wide sleep states.
+ *
+ * async - Report/change current async suspend setting for the device
+ *
+ * Asynchronous suspend and resume of the device during system-wide power
+ * state transitions can be enabled by writing "enabled" to this file.
+ * Analogously, if "disabled" is written to this file, the device will be
+ * suspended and resumed synchronously.
+ *
+ * All devices have one of the following two values for power/async:
+ *
+ * + "enabled\n" to permit the asynchronous suspend/resume of the device;
+ * + "disabled\n" to forbid it;
+ *
+ * NOTE: It generally is unsafe to permit the asynchronous suspend/resume
+ * of a device unless it is certain that all of the PM dependencies of the
+ * device are known to the PM core. However, for some devices this
+ * attribute is set to "enabled" by bus type code or device drivers and in
+ * that cases it should be safe to leave the default value.
+ *
+ * autosuspend_delay_ms - Report/change a device's autosuspend_delay value
+ *
+ * Some drivers don't want to carry out a runtime suspend as soon as a
+ * device becomes idle; they want it always to remain idle for some period
+ * of time before suspending it. This period is the autosuspend_delay
+ * value (expressed in milliseconds) and it can be controlled by the user.
+ * If the value is negative then the device will never be runtime
+ * suspended.
+ *
+ * NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay
+ * value are used only if the driver calls pm_runtime_use_autosuspend().
+ *
+ * wakeup_count - Report the number of wakeup events related to the device
+ */
+
+static const char enabled[] = "enabled";
+static const char disabled[] = "disabled";
+
+const char power_group_name[] = "power";
+EXPORT_SYMBOL_GPL(power_group_name);
+
+#ifdef CONFIG_PM_RUNTIME
+static const char ctrl_auto[] = "auto";
+static const char ctrl_on[] = "on";
+
+static ssize_t control_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n",
+ dev->power.runtime_auto ? ctrl_auto : ctrl_on);
+}
+
+static ssize_t control_store(struct device * dev, struct device_attribute *attr,
+ const char * buf, size_t n)
+{
+ char *cp;
+ int len = n;
+
+ cp = memchr(buf, '\n', n);
+ if (cp)
+ len = cp - buf;
+ device_lock(dev);
+ if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0)
+ pm_runtime_allow(dev);
+ else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0)
+ pm_runtime_forbid(dev);
+ else
+ n = -EINVAL;
+ device_unlock(dev);
+ return n;
+}
+
+static DEVICE_ATTR(control, 0644, control_show, control_store);
+
+static ssize_t rtpm_active_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ spin_lock_irq(&dev->power.lock);
+ update_pm_runtime_accounting(dev);
+ ret = sprintf(buf, "%i\n", jiffies_to_msecs(dev->power.active_jiffies));
+ spin_unlock_irq(&dev->power.lock);
+ return ret;
+}
+
+static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL);
+
+static ssize_t rtpm_suspended_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ spin_lock_irq(&dev->power.lock);
+ update_pm_runtime_accounting(dev);
+ ret = sprintf(buf, "%i\n",
+ jiffies_to_msecs(dev->power.suspended_jiffies));
+ spin_unlock_irq(&dev->power.lock);
+ return ret;
+}
+
+static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL);
+
+static ssize_t rtpm_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ const char *p;
+
+ if (dev->power.runtime_error) {
+ p = "error\n";
+ } else if (dev->power.disable_depth) {
+ p = "unsupported\n";
+ } else {
+ switch (dev->power.runtime_status) {
+ case RPM_SUSPENDED:
+ p = "suspended\n";
+ break;
+ case RPM_SUSPENDING:
+ p = "suspending\n";
+ break;
+ case RPM_RESUMING:
+ p = "resuming\n";
+ break;
+ case RPM_ACTIVE:
+ p = "active\n";
+ break;
+ default:
+ return -EIO;
+ }
+ }
+ return sprintf(buf, p);
+}
+
+static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL);
+
+static ssize_t autosuspend_delay_ms_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if (!dev->power.use_autosuspend)
+ return -EIO;
+ return sprintf(buf, "%d\n", dev->power.autosuspend_delay);
+}
+
+static ssize_t autosuspend_delay_ms_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t n)
+{
+ long delay;
+
+ if (!dev->power.use_autosuspend)
+ return -EIO;
+
+ if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay)
+ return -EINVAL;
+
+ device_lock(dev);
+ pm_runtime_set_autosuspend_delay(dev, delay);
+ device_unlock(dev);
+ return n;
+}
+
+static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show,
+ autosuspend_delay_ms_store);
+
+static ssize_t pm_qos_latency_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", dev->power.pq_req->node.prio);
+}
+
+static ssize_t pm_qos_latency_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ s32 value;
+ int ret;
+
+ if (kstrtos32(buf, 0, &value))
+ return -EINVAL;
+
+ if (value < 0)
+ return -EINVAL;
+
+ ret = dev_pm_qos_update_request(dev->power.pq_req, value);
+ return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_resume_latency_us, 0644,
+ pm_qos_latency_show, pm_qos_latency_store);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+static ssize_t
+wake_show(struct device * dev, struct device_attribute *attr, char * buf)
+{
+ return sprintf(buf, "%s\n", device_can_wakeup(dev)
+ ? (device_may_wakeup(dev) ? enabled : disabled)
+ : "");
+}
+
+static ssize_t
+wake_store(struct device * dev, struct device_attribute *attr,
+ const char * buf, size_t n)
+{
+ char *cp;
+ int len = n;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ cp = memchr(buf, '\n', n);
+ if (cp)
+ len = cp - buf;
+ if (len == sizeof enabled - 1
+ && strncmp(buf, enabled, sizeof enabled - 1) == 0)
+ device_set_wakeup_enable(dev, 1);
+ else if (len == sizeof disabled - 1
+ && strncmp(buf, disabled, sizeof disabled - 1) == 0)
+ device_set_wakeup_enable(dev, 0);
+ else
+ return -EINVAL;
+ return n;
+}
+
+static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+
+static ssize_t wakeup_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned long count = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ count = dev->power.wakeup->event_count;
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
+
+static ssize_t wakeup_active_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned long count = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ count = dev->power.wakeup->active_count;
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL);
+
+static ssize_t wakeup_abort_count_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ unsigned long count = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ count = dev->power.wakeup->wakeup_count;
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_abort_count, 0444, wakeup_abort_count_show, NULL);
+
+static ssize_t wakeup_expire_count_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ unsigned long count = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ count = dev->power.wakeup->expire_count;
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_expire_count, 0444, wakeup_expire_count_show, NULL);
+
+static ssize_t wakeup_active_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned int active = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ active = dev->power.wakeup->active;
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL);
+
+static ssize_t wakeup_total_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ s64 msec = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ msec = ktime_to_ms(dev->power.wakeup->total_time);
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL);
+
+static ssize_t wakeup_max_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ s64 msec = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ msec = ktime_to_ms(dev->power.wakeup->max_time);
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL);
+
+static ssize_t wakeup_last_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ s64 msec = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ msec = ktime_to_ms(dev->power.wakeup->last_time);
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL);
+
+#ifdef CONFIG_PM_AUTOSLEEP
+static ssize_t wakeup_prevent_sleep_time_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ s64 msec = 0;
+ bool enabled = false;
+
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ msec = ktime_to_ms(dev->power.wakeup->prevent_sleep_time);
+ enabled = true;
+ }
+ spin_unlock_irq(&dev->power.lock);
+ return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n");
+}
+
+static DEVICE_ATTR(wakeup_prevent_sleep_time_ms, 0444,
+ wakeup_prevent_sleep_time_show, NULL);
+#endif /* CONFIG_PM_AUTOSLEEP */
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_ADVANCED_DEBUG
+#ifdef CONFIG_PM_RUNTIME
+
+static ssize_t rtpm_usagecount_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", atomic_read(&dev->power.usage_count));
+}
+
+static ssize_t rtpm_children_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", dev->power.ignore_children ?
+ 0 : atomic_read(&dev->power.child_count));
+}
+
+static ssize_t rtpm_enabled_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if ((dev->power.disable_depth) && (dev->power.runtime_auto == false))
+ return sprintf(buf, "disabled & forbidden\n");
+ else if (dev->power.disable_depth)
+ return sprintf(buf, "disabled\n");
+ else if (dev->power.runtime_auto == false)
+ return sprintf(buf, "forbidden\n");
+ return sprintf(buf, "enabled\n");
+}
+
+static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL);
+static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL);
+static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL);
+
+#endif
+
+static ssize_t async_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n",
+ device_async_suspend_enabled(dev) ? enabled : disabled);
+}
+
+static ssize_t async_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ char *cp;
+ int len = n;
+
+ cp = memchr(buf, '\n', n);
+ if (cp)
+ len = cp - buf;
+ if (len == sizeof enabled - 1 && strncmp(buf, enabled, len) == 0)
+ device_enable_async_suspend(dev);
+ else if (len == sizeof disabled - 1 && strncmp(buf, disabled, len) == 0)
+ device_disable_async_suspend(dev);
+ else
+ return -EINVAL;
+ return n;
+}
+
+static DEVICE_ATTR(async, 0644, async_show, async_store);
+#endif /* CONFIG_PM_ADVANCED_DEBUG */
+
+static struct attribute *power_attrs[] = {
+#ifdef CONFIG_PM_ADVANCED_DEBUG
+#ifdef CONFIG_PM_SLEEP
+ &dev_attr_async.attr,
+#endif
+#ifdef CONFIG_PM_RUNTIME
+ &dev_attr_runtime_status.attr,
+ &dev_attr_runtime_usage.attr,
+ &dev_attr_runtime_active_kids.attr,
+ &dev_attr_runtime_enabled.attr,
+#endif
+#endif /* CONFIG_PM_ADVANCED_DEBUG */
+ NULL,
+};
+static struct attribute_group pm_attr_group = {
+ .name = power_group_name,
+ .attrs = power_attrs,
+};
+
+static struct attribute *wakeup_attrs[] = {
+#ifdef CONFIG_PM_SLEEP
+ &dev_attr_wakeup.attr,
+ &dev_attr_wakeup_count.attr,
+ &dev_attr_wakeup_active_count.attr,
+ &dev_attr_wakeup_abort_count.attr,
+ &dev_attr_wakeup_expire_count.attr,
+ &dev_attr_wakeup_active.attr,
+ &dev_attr_wakeup_total_time_ms.attr,
+ &dev_attr_wakeup_max_time_ms.attr,
+ &dev_attr_wakeup_last_time_ms.attr,
+#ifdef CONFIG_PM_AUTOSLEEP
+ &dev_attr_wakeup_prevent_sleep_time_ms.attr,
+#endif
+#endif
+ NULL,
+};
+static struct attribute_group pm_wakeup_attr_group = {
+ .name = power_group_name,
+ .attrs = wakeup_attrs,
+};
+
+static struct attribute *runtime_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+#ifndef CONFIG_PM_ADVANCED_DEBUG
+ &dev_attr_runtime_status.attr,
+#endif
+ &dev_attr_control.attr,
+ &dev_attr_runtime_suspended_time.attr,
+ &dev_attr_runtime_active_time.attr,
+ &dev_attr_autosuspend_delay_ms.attr,
+#endif /* CONFIG_PM_RUNTIME */
+ NULL,
+};
+static struct attribute_group pm_runtime_attr_group = {
+ .name = power_group_name,
+ .attrs = runtime_attrs,
+};
+
+static struct attribute *pm_qos_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+ &dev_attr_pm_qos_resume_latency_us.attr,
+#endif /* CONFIG_PM_RUNTIME */
+ NULL,
+};
+static struct attribute_group pm_qos_attr_group = {
+ .name = power_group_name,
+ .attrs = pm_qos_attrs,
+};
+
+int dpm_sysfs_add(struct device *dev)
+{
+ int rc;
+
+ rc = sysfs_create_group(&dev->kobj, &pm_attr_group);
+ if (rc)
+ return rc;
+
+ if (pm_runtime_callbacks_present(dev)) {
+ rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group);
+ if (rc)
+ goto err_out;
+ }
+
+ if (device_can_wakeup(dev)) {
+ rc = sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group);
+ if (rc) {
+ if (pm_runtime_callbacks_present(dev))
+ sysfs_unmerge_group(&dev->kobj,
+ &pm_runtime_attr_group);
+ goto err_out;
+ }
+ }
+ return 0;
+
+ err_out:
+ sysfs_remove_group(&dev->kobj, &pm_attr_group);
+ return rc;
+}
+
+int wakeup_sysfs_add(struct device *dev)
+{
+ return sysfs_merge_group(&dev->kobj, &pm_wakeup_attr_group);
+}
+
+void wakeup_sysfs_remove(struct device *dev)
+{
+ sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
+}
+
+int pm_qos_sysfs_add(struct device *dev)
+{
+ return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group);
+}
+
+void pm_qos_sysfs_remove(struct device *dev)
+{
+ sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group);
+}
+
+void rpm_sysfs_remove(struct device *dev)
+{
+ sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group);
+}
+
+void dpm_sysfs_remove(struct device *dev)
+{
+ rpm_sysfs_remove(dev);
+ sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
+ sysfs_remove_group(&dev->kobj, &pm_attr_group);
+}
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/trace.c b/ap/os/linux/linux-3.4.x/drivers/base/power/trace.c
new file mode 100644
index 0000000..d94a1f5
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/trace.c
@@ -0,0 +1,266 @@
+/*
+ * drivers/base/power/trace.c
+ *
+ * Copyright (C) 2006 Linus Torvalds
+ *
+ * Trace facility for suspend/resume problems, when none of the
+ * devices may be working.
+ */
+
+#include <linux/resume-trace.h>
+#include <linux/export.h>
+#include <linux/rtc.h>
+
+#include <asm/rtc.h>
+
+#include "power.h"
+
+/*
+ * Horrid, horrid, horrid.
+ *
+ * It turns out that the _only_ piece of hardware that actually
+ * keeps its value across a hard boot (and, more importantly, the
+ * POST init sequence) is literally the realtime clock.
+ *
+ * Never mind that an RTC chip has 114 bytes (and often a whole
+ * other bank of an additional 128 bytes) of nice SRAM that is
+ * _designed_ to keep data - the POST will clear it. So we literally
+ * can just use the few bytes of actual time data, which means that
+ * we're really limited.
+ *
+ * It means, for example, that we can't use the seconds at all
+ * (since the time between the hang and the boot might be more
+ * than a minute), and we'd better not depend on the low bits of
+ * the minutes either.
+ *
+ * There are the wday fields etc, but I wouldn't guarantee those
+ * are dependable either. And if the date isn't valid, either the
+ * hw or POST will do strange things.
+ *
+ * So we're left with:
+ * - year: 0-99
+ * - month: 0-11
+ * - day-of-month: 1-28
+ * - hour: 0-23
+ * - min: (0-30)*2
+ *
+ * Giving us a total range of 0-16128000 (0xf61800), ie less
+ * than 24 bits of actual data we can save across reboots.
+ *
+ * And if your box can't boot in less than three minutes,
+ * you're screwed.
+ *
+ * Now, almost 24 bits of data is pitifully small, so we need
+ * to be pretty dense if we want to use it for anything nice.
+ * What we do is that instead of saving off nice readable info,
+ * we save off _hashes_ of information that we can hopefully
+ * regenerate after the reboot.
+ *
+ * In particular, this means that we might be unlucky, and hit
+ * a case where we have a hash collision, and we end up not
+ * being able to tell for certain exactly which case happened.
+ * But that's hopefully unlikely.
+ *
+ * What we do is to take the bits we can fit, and split them
+ * into three parts (16*997*1009 = 16095568), and use the values
+ * for:
+ * - 0-15: user-settable
+ * - 0-996: file + line number
+ * - 0-1008: device
+ */
+#define USERHASH (16)
+#define FILEHASH (997)
+#define DEVHASH (1009)
+
+#define DEVSEED (7919)
+
+static unsigned int dev_hash_value;
+
+static int set_magic_time(unsigned int user, unsigned int file, unsigned int device)
+{
+ unsigned int n = user + USERHASH*(file + FILEHASH*device);
+
+ // June 7th, 2006
+ static struct rtc_time time = {
+ .tm_sec = 0,
+ .tm_min = 0,
+ .tm_hour = 0,
+ .tm_mday = 7,
+ .tm_mon = 5, // June - counting from zero
+ .tm_year = 106,
+ .tm_wday = 3,
+ .tm_yday = 160,
+ .tm_isdst = 1
+ };
+
+ time.tm_year = (n % 100);
+ n /= 100;
+ time.tm_mon = (n % 12);
+ n /= 12;
+ time.tm_mday = (n % 28) + 1;
+ n /= 28;
+ time.tm_hour = (n % 24);
+ n /= 24;
+ time.tm_min = (n % 20) * 3;
+ n /= 20;
+ set_rtc_time(&time);
+ return n ? -1 : 0;
+}
+
+static unsigned int read_magic_time(void)
+{
+ struct rtc_time time;
+ unsigned int val;
+
+ get_rtc_time(&time);
+ pr_info("RTC time: %2d:%02d:%02d, date: %02d/%02d/%02d\n",
+ time.tm_hour, time.tm_min, time.tm_sec,
+ time.tm_mon + 1, time.tm_mday, time.tm_year % 100);
+ val = time.tm_year; /* 100 years */
+ if (val > 100)
+ val -= 100;
+ val += time.tm_mon * 100; /* 12 months */
+ val += (time.tm_mday-1) * 100 * 12; /* 28 month-days */
+ val += time.tm_hour * 100 * 12 * 28; /* 24 hours */
+ val += (time.tm_min / 3) * 100 * 12 * 28 * 24; /* 20 3-minute intervals */
+ return val;
+}
+
+/*
+ * This is just the sdbm hash function with a user-supplied
+ * seed and final size parameter.
+ */
+static unsigned int hash_string(unsigned int seed, const char *data, unsigned int mod)
+{
+ unsigned char c;
+ while ((c = *data++) != 0) {
+ seed = (seed << 16) + (seed << 6) - seed + c;
+ }
+ return seed % mod;
+}
+
+void set_trace_device(struct device *dev)
+{
+ dev_hash_value = hash_string(DEVSEED, dev_name(dev), DEVHASH);
+}
+EXPORT_SYMBOL(set_trace_device);
+
+/*
+ * We could just take the "tracedata" index into the .tracedata
+ * section instead. Generating a hash of the data gives us a
+ * chance to work across kernel versions, and perhaps more
+ * importantly it also gives us valid/invalid check (ie we will
+ * likely not give totally bogus reports - if the hash matches,
+ * it's not any guarantee, but it's a high _likelihood_ that
+ * the match is valid).
+ */
+void generate_resume_trace(const void *tracedata, unsigned int user)
+{
+ unsigned short lineno = *(unsigned short *)tracedata;
+ const char *file = *(const char **)(tracedata + 2);
+ unsigned int user_hash_value, file_hash_value;
+
+ user_hash_value = user % USERHASH;
+ file_hash_value = hash_string(lineno, file, FILEHASH);
+ set_magic_time(user_hash_value, file_hash_value, dev_hash_value);
+}
+EXPORT_SYMBOL(generate_resume_trace);
+
+extern char __tracedata_start, __tracedata_end;
+static int show_file_hash(unsigned int value)
+{
+ int match;
+ char *tracedata;
+
+ match = 0;
+ for (tracedata = &__tracedata_start ; tracedata < &__tracedata_end ;
+ tracedata += 2 + sizeof(unsigned long)) {
+ unsigned short lineno = *(unsigned short *)tracedata;
+ const char *file = *(const char **)(tracedata + 2);
+ unsigned int hash = hash_string(lineno, file, FILEHASH);
+ if (hash != value)
+ continue;
+ pr_info(" hash matches %s:%u\n", file, lineno);
+ match++;
+ }
+ return match;
+}
+
+static int show_dev_hash(unsigned int value)
+{
+ int match = 0;
+ struct list_head *entry;
+
+ device_pm_lock();
+ entry = dpm_list.prev;
+ while (entry != &dpm_list) {
+ struct device * dev = to_device(entry);
+ unsigned int hash = hash_string(DEVSEED, dev_name(dev), DEVHASH);
+ if (hash == value) {
+ dev_info(dev, "hash matches\n");
+ match++;
+ }
+ entry = entry->prev;
+ }
+ device_pm_unlock();
+ return match;
+}
+
+static unsigned int hash_value_early_read;
+
+int show_trace_dev_match(char *buf, size_t size)
+{
+ unsigned int value = hash_value_early_read / (USERHASH * FILEHASH);
+ int ret = 0;
+ struct list_head *entry;
+
+ /*
+ * It's possible that multiple devices will match the hash and we can't
+ * tell which is the culprit, so it's best to output them all.
+ */
+ device_pm_lock();
+ entry = dpm_list.prev;
+ while (size && entry != &dpm_list) {
+ struct device *dev = to_device(entry);
+ unsigned int hash = hash_string(DEVSEED, dev_name(dev),
+ DEVHASH);
+ if (hash == value) {
+ int len = snprintf(buf, size, "%s\n",
+ dev_driver_string(dev));
+ if (len > size)
+ len = size;
+ buf += len;
+ ret += len;
+ size -= len;
+ }
+ entry = entry->prev;
+ }
+ device_pm_unlock();
+ return ret;
+}
+
+static int early_resume_init(void)
+{
+ hash_value_early_read = read_magic_time();
+ return 0;
+}
+
+static int late_resume_init(void)
+{
+ unsigned int val = hash_value_early_read;
+ unsigned int user, file, dev;
+
+ user = val % USERHASH;
+ val = val / USERHASH;
+ file = val % FILEHASH;
+ val = val / FILEHASH;
+ dev = val /* % DEVHASH */;
+
+ pr_info(" Magic number: %d:%d:%d\n", user, file, dev);
+ show_file_hash(file);
+ show_dev_hash(dev);
+ return 0;
+}
+
+core_initcall(early_resume_init);
+late_initcall(late_resume_init);
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/wakeup.c b/ap/os/linux/linux-3.4.x/drivers/base/power/wakeup.c
new file mode 100644
index 0000000..2dc1418
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/wakeup.c
@@ -0,0 +1,1022 @@
+/*
+ * drivers/base/power/wakeup.c - System wakeup events framework
+ *
+ * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/capability.h>
+#include <linux/export.h>
+#include <linux/suspend.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <trace/events/power.h>
+
+#include "power.h"
+
+/*
+ * If set, the suspend/hibernate code will abort transitions to a sleep state
+ * if wakeup events are registered during or immediately before the transition.
+ */
+bool events_check_enabled __read_mostly;
+
+/*
+ * Combined counters of registered wakeup events and wakeup events in progress.
+ * They need to be modified together atomically, so it's better to use one
+ * atomic variable to hold them both.
+ */
+static atomic_t combined_event_count = ATOMIC_INIT(0);
+
+#define IN_PROGRESS_BITS (sizeof(int) * 4)
+#define MAX_IN_PROGRESS ((1 << IN_PROGRESS_BITS) - 1)
+
+static void split_counters(unsigned int *cnt, unsigned int *inpr)
+{
+ unsigned int comb = atomic_read(&combined_event_count);
+
+ *cnt = (comb >> IN_PROGRESS_BITS);
+ *inpr = comb & MAX_IN_PROGRESS;
+}
+
+/* A preserved old value of the events counter. */
+static unsigned int saved_count;
+
+static DEFINE_SPINLOCK(events_lock);
+
+static void pm_wakeup_timer_fn(unsigned long data);
+
+static LIST_HEAD(wakeup_sources);
+
+static DECLARE_WAIT_QUEUE_HEAD(wakeup_count_wait_queue);
+
+
+volatile int wakelock_current_event_num = 0;
+
+
+/*******************************************************************
+ *********** for trace lasted 1000 wakelock operations **********
+ *******************************************************************
+ */
+#define ZX_TRACE_WAKESRC
+
+#ifdef ZX_TRACE_WAKESRC
+/*#pragma GCC optimize("O0")*/
+
+extern unsigned int test_timer_read( void );
+
+#define TRACE_WAKESRC_COUNT 50
+
+typedef struct
+{
+ struct wakeup_source * wakesrc_trace;
+ unsigned int wakesrc_time;
+}wakesrc_trace_t;
+
+volatile wakesrc_trace_t wakesrc_lock_view[TRACE_WAKESRC_COUNT];
+volatile unsigned int wakesrc_lock_index = 0;
+volatile wakesrc_trace_t wakesrc_unlock_view[TRACE_WAKESRC_COUNT];
+volatile unsigned int wakesrc_unlock_index = 0;
+
+void trace_lock_wakesrc(struct wakeup_source *ws)
+{
+ unsigned long msr;
+
+ if(!strncmp(ws->name, "nand", 4))
+ return;
+
+
+ local_irq_save(msr);
+
+ wakesrc_lock_view[wakesrc_lock_index].wakesrc_trace = ws;
+ wakesrc_lock_view[wakesrc_lock_index].wakesrc_time = test_timer_read();
+ wakesrc_lock_index++;
+ if(wakesrc_lock_index==TRACE_WAKESRC_COUNT)
+ wakesrc_lock_index=0;
+
+ local_irq_restore(msr);
+
+}
+
+void trace_unlock_wakesrc(struct wakeup_source *ws)
+{
+ unsigned long msr;
+
+ if(!strncmp(ws->name, "nand", 4))
+ return;
+
+ local_irq_save(msr);
+
+ wakesrc_unlock_view[wakesrc_unlock_index].wakesrc_trace = ws;
+ wakesrc_unlock_view[wakesrc_unlock_index].wakesrc_time = test_timer_read();
+ wakesrc_unlock_index++;
+ if(wakesrc_unlock_index==TRACE_WAKESRC_COUNT)
+ wakesrc_unlock_index=0;
+ local_irq_restore(msr);
+
+}
+#else
+void trace_lock_wakesrc(struct wakeup_source *ws){}
+void trace_unlock_wakesrc(struct wakeup_source *ws){}
+#endif
+
+#ifdef CONFIG_ZX_PM_SUSPEND
+extern void zx_pm_suspend(void);
+
+#define PM_WS_RECORD_COUNT 50
+static unsigned int pm_ws_count = 0;
+struct wakeup_source *pm_ws_record[PM_WS_RECORD_COUNT];
+
+static char debug_wakeup_buf[200];
+void pm_debug_wakelocks(void)
+{
+ char *str = debug_wakeup_buf;
+ struct wakeup_source *ws;
+
+ rcu_read_lock();
+
+ *str = 0;
+
+ list_for_each_entry_rcu(ws, &wakeup_sources, entry)
+ {
+ if (ws->active)
+ {
+ str += scnprintf(str, 200, "%s ", ws->name);
+ }
+ }
+
+ printk("[WAKELOCK] %s \n", debug_wakeup_buf);
+
+ rcu_read_unlock();
+}
+
+static void pm_record_ws(struct wakeup_source *ws)
+{
+ unsigned long msr;
+ local_irq_save(msr);
+
+ if(pm_ws_count == PM_WS_RECORD_COUNT){
+ local_irq_restore(msr);
+ return;
+ }
+
+ pm_ws_record[pm_ws_count] = ws;
+ pm_ws_count++;
+ local_irq_restore(msr);
+}
+#else
+void pm_debug_wakelocks(void){}
+static void pm_record_ws(struct wakeup_source *ws){}
+static void zx_pm_suspend(void){}
+#endif
+
+/**
+ * wakeup_source_prepare - Prepare a new wakeup source for initialization.
+ * @ws: Wakeup source to prepare.
+ * @name: Pointer to the name of the new wakeup source.
+ *
+ * Callers must ensure that the @name string won't be freed when @ws is still in
+ * use.
+ */
+void wakeup_source_prepare(struct wakeup_source *ws, const char *name)
+{
+ if (ws) {
+ memset(ws, 0, sizeof(*ws));
+ ws->name = name;
+ }
+}
+EXPORT_SYMBOL_GPL(wakeup_source_prepare);
+
+/**
+ * wakeup_source_create - Create a struct wakeup_source object.
+ * @name: Name of the new wakeup source.
+ */
+struct wakeup_source *wakeup_source_create(const char *name)
+{
+ struct wakeup_source *ws;
+
+ ws = kmalloc(sizeof(*ws), GFP_KERNEL);
+ if (!ws)
+ return NULL;
+
+ wakeup_source_prepare(ws, name ? kstrdup(name, GFP_KERNEL) : NULL);
+ return ws;
+}
+EXPORT_SYMBOL_GPL(wakeup_source_create);
+
+/**
+ * wakeup_source_drop - Prepare a struct wakeup_source object for destruction.
+ * @ws: Wakeup source to prepare for destruction.
+ *
+ * Callers must ensure that __pm_stay_awake() or __pm_wakeup_event() will never
+ * be run in parallel with this function for the same wakeup source object.
+ */
+void wakeup_source_drop(struct wakeup_source *ws)
+{
+ if (!ws)
+ return;
+
+ del_timer_sync(&ws->timer);
+ __pm_relax(ws);
+}
+EXPORT_SYMBOL_GPL(wakeup_source_drop);
+
+/**
+ * wakeup_source_destroy - Destroy a struct wakeup_source object.
+ * @ws: Wakeup source to destroy.
+ *
+ * Use only for wakeup source objects created with wakeup_source_create().
+ */
+void wakeup_source_destroy(struct wakeup_source *ws)
+{
+ if (!ws)
+ return;
+
+ wakeup_source_drop(ws);
+ kfree(ws->name);
+ kfree(ws);
+}
+EXPORT_SYMBOL_GPL(wakeup_source_destroy);
+
+/**
+ * wakeup_source_add - Add given object to the list of wakeup sources.
+ * @ws: Wakeup source object to add to the list.
+ */
+void wakeup_source_add(struct wakeup_source *ws)
+{
+ unsigned long flags;
+
+ if (WARN_ON(!ws))
+ return;
+
+ spin_lock_init(&ws->lock);
+ setup_timer(&ws->timer, pm_wakeup_timer_fn, (unsigned long)ws);
+ ws->active = false;
+ ws->last_time = ktime_get();
+
+ spin_lock_irqsave(&events_lock, flags);
+ list_add_rcu(&ws->entry, &wakeup_sources);
+ pm_record_ws(ws);
+ spin_unlock_irqrestore(&events_lock, flags);
+}
+EXPORT_SYMBOL_GPL(wakeup_source_add);
+
+/**
+ * wakeup_source_remove - Remove given object from the wakeup sources list.
+ * @ws: Wakeup source object to remove from the list.
+ */
+void wakeup_source_remove(struct wakeup_source *ws)
+{
+ unsigned long flags;
+
+ if (WARN_ON(!ws))
+ return;
+
+ spin_lock_irqsave(&events_lock, flags);
+ list_del_rcu(&ws->entry);
+ spin_unlock_irqrestore(&events_lock, flags);
+ synchronize_rcu();
+}
+EXPORT_SYMBOL_GPL(wakeup_source_remove);
+
+/**
+ * wakeup_source_register - Create wakeup source and add it to the list.
+ * @name: Name of the wakeup source to register.
+ */
+struct wakeup_source *wakeup_source_register(const char *name)
+{
+ struct wakeup_source *ws;
+
+ ws = wakeup_source_create(name);
+ if (ws)
+ wakeup_source_add(ws);
+
+ return ws;
+}
+EXPORT_SYMBOL_GPL(wakeup_source_register);
+
+/**
+ * wakeup_source_unregister - Remove wakeup source from the list and remove it.
+ * @ws: Wakeup source object to unregister.
+ */
+void wakeup_source_unregister(struct wakeup_source *ws)
+{
+ if (ws) {
+ wakeup_source_remove(ws);
+ wakeup_source_destroy(ws);
+ }
+}
+EXPORT_SYMBOL_GPL(wakeup_source_unregister);
+
+/**
+ * device_wakeup_attach - Attach a wakeup source object to a device object.
+ * @dev: Device to handle.
+ * @ws: Wakeup source object to attach to @dev.
+ *
+ * This causes @dev to be treated as a wakeup device.
+ */
+static int device_wakeup_attach(struct device *dev, struct wakeup_source *ws)
+{
+ spin_lock_irq(&dev->power.lock);
+ if (dev->power.wakeup) {
+ spin_unlock_irq(&dev->power.lock);
+ return -EEXIST;
+ }
+ dev->power.wakeup = ws;
+ spin_unlock_irq(&dev->power.lock);
+ return 0;
+}
+
+/**
+ * device_wakeup_enable - Enable given device to be a wakeup source.
+ * @dev: Device to handle.
+ *
+ * Create a wakeup source object, register it and attach it to @dev.
+ */
+int device_wakeup_enable(struct device *dev)
+{
+ struct wakeup_source *ws;
+ int ret;
+
+ if (!dev || !dev->power.can_wakeup)
+ return -EINVAL;
+
+ ws = wakeup_source_register(dev_name(dev));
+ if (!ws)
+ return -ENOMEM;
+
+ ret = device_wakeup_attach(dev, ws);
+ if (ret)
+ wakeup_source_unregister(ws);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(device_wakeup_enable);
+
+/**
+ * device_wakeup_detach - Detach a device's wakeup source object from it.
+ * @dev: Device to detach the wakeup source object from.
+ *
+ * After it returns, @dev will not be treated as a wakeup device any more.
+ */
+static struct wakeup_source *device_wakeup_detach(struct device *dev)
+{
+ struct wakeup_source *ws;
+
+ spin_lock_irq(&dev->power.lock);
+ ws = dev->power.wakeup;
+ dev->power.wakeup = NULL;
+ spin_unlock_irq(&dev->power.lock);
+ return ws;
+}
+
+/**
+ * device_wakeup_disable - Do not regard a device as a wakeup source any more.
+ * @dev: Device to handle.
+ *
+ * Detach the @dev's wakeup source object from it, unregister this wakeup source
+ * object and destroy it.
+ */
+int device_wakeup_disable(struct device *dev)
+{
+ struct wakeup_source *ws;
+
+ if (!dev || !dev->power.can_wakeup)
+ return -EINVAL;
+
+ ws = device_wakeup_detach(dev);
+ if (ws)
+ wakeup_source_unregister(ws);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(device_wakeup_disable);
+
+/**
+ * device_set_wakeup_capable - Set/reset device wakeup capability flag.
+ * @dev: Device to handle.
+ * @capable: Whether or not @dev is capable of waking up the system from sleep.
+ *
+ * If @capable is set, set the @dev's power.can_wakeup flag and add its
+ * wakeup-related attributes to sysfs. Otherwise, unset the @dev's
+ * power.can_wakeup flag and remove its wakeup-related attributes from sysfs.
+ *
+ * This function may sleep and it can't be called from any context where
+ * sleeping is not allowed.
+ */
+void device_set_wakeup_capable(struct device *dev, bool capable)
+{
+ if (!!dev->power.can_wakeup == !!capable)
+ return;
+
+ if (device_is_registered(dev) && !list_empty(&dev->power.entry)) {
+ if (capable) {
+ if (wakeup_sysfs_add(dev))
+ return;
+ } else {
+ wakeup_sysfs_remove(dev);
+ }
+ }
+ dev->power.can_wakeup = capable;
+}
+EXPORT_SYMBOL_GPL(device_set_wakeup_capable);
+
+/**
+ * device_init_wakeup - Device wakeup initialization.
+ * @dev: Device to handle.
+ * @enable: Whether or not to enable @dev as a wakeup device.
+ *
+ * By default, most devices should leave wakeup disabled. The exceptions are
+ * devices that everyone expects to be wakeup sources: keyboards, power buttons,
+ * possibly network interfaces, etc. Also, devices that don't generate their
+ * own wakeup requests but merely forward requests from one bus to another
+ * (like PCI bridges) should have wakeup enabled by default.
+ */
+int device_init_wakeup(struct device *dev, bool enable)
+{
+ int ret = 0;
+
+ if (enable) {
+ device_set_wakeup_capable(dev, true);
+ ret = device_wakeup_enable(dev);
+ } else {
+ device_set_wakeup_capable(dev, false);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(device_init_wakeup);
+
+/**
+ * device_set_wakeup_enable - Enable or disable a device to wake up the system.
+ * @dev: Device to handle.
+ */
+int device_set_wakeup_enable(struct device *dev, bool enable)
+{
+ if (!dev || !dev->power.can_wakeup)
+ return -EINVAL;
+
+ return enable ? device_wakeup_enable(dev) : device_wakeup_disable(dev);
+}
+EXPORT_SYMBOL_GPL(device_set_wakeup_enable);
+
+/*
+ * The functions below use the observation that each wakeup event starts a
+ * period in which the system should not be suspended. The moment this period
+ * will end depends on how the wakeup event is going to be processed after being
+ * detected and all of the possible cases can be divided into two distinct
+ * groups.
+ *
+ * First, a wakeup event may be detected by the same functional unit that will
+ * carry out the entire processing of it and possibly will pass it to user space
+ * for further processing. In that case the functional unit that has detected
+ * the event may later "close" the "no suspend" period associated with it
+ * directly as soon as it has been dealt with. The pair of pm_stay_awake() and
+ * pm_relax(), balanced with each other, is supposed to be used in such
+ * situations.
+ *
+ * Second, a wakeup event may be detected by one functional unit and processed
+ * by another one. In that case the unit that has detected it cannot really
+ * "close" the "no suspend" period associated with it, unless it knows in
+ * advance what's going to happen to the event during processing. This
+ * knowledge, however, may not be available to it, so it can simply specify time
+ * to wait before the system can be suspended and pass it as the second
+ * argument of pm_wakeup_event().
+ *
+ * It is valid to call pm_relax() after pm_wakeup_event(), in which case the
+ * "no suspend" period will be ended either by the pm_relax(), or by the timer
+ * function executed when the timer expires, whichever comes first.
+ */
+
+/**
+ * wakup_source_activate - Mark given wakeup source as active.
+ * @ws: Wakeup source to handle.
+ *
+ * Update the @ws' statistics and, if @ws has just been activated, notify the PM
+ * core of the event by incrementing the counter of of wakeup events being
+ * processed.
+ */
+static void wakeup_source_activate(struct wakeup_source *ws)
+{
+ unsigned int cec;
+
+ ws->active = true;
+ ws->active_count++;
+ ws->last_time = ktime_get();
+ if (ws->autosleep_enabled)
+ ws->start_prevent_time = ws->last_time;
+
+ /* Increment the counter of events in progress. */
+ cec = atomic_inc_return(&combined_event_count);
+
+ trace_wakeup_source_activate(ws->name, cec);
+
+ trace_lock_wakesrc(ws);
+}
+
+/**
+ * wakeup_source_report_event - Report wakeup event using the given source.
+ * @ws: Wakeup source to report the event for.
+ */
+static void wakeup_source_report_event(struct wakeup_source *ws)
+{
+ ws->event_count++;
+ /* This is racy, but the counter is approximate anyway. */
+ if (events_check_enabled)
+ ws->wakeup_count++;
+
+ if (!ws->active)
+ {
+ wakelock_current_event_num++;
+ wakeup_source_activate(ws);
+ }
+}
+
+/**
+ * __pm_stay_awake - Notify the PM core of a wakeup event.
+ * @ws: Wakeup source object associated with the source of the event.
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void __pm_stay_awake(struct wakeup_source *ws)
+{
+ unsigned long flags;
+
+ if (!ws)
+ return;
+
+ spin_lock_irqsave(&ws->lock, flags);
+
+ wakeup_source_report_event(ws);
+ del_timer(&ws->timer);
+ ws->timer_expires = 0;
+
+ spin_unlock_irqrestore(&ws->lock, flags);
+}
+EXPORT_SYMBOL_GPL(__pm_stay_awake);
+
+/**
+ * pm_stay_awake - Notify the PM core that a wakeup event is being processed.
+ * @dev: Device the wakeup event is related to.
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) by calling
+ * __pm_stay_awake for the @dev's wakeup source object.
+ *
+ * Call this function after detecting of a wakeup event if pm_relax() is going
+ * to be called directly after processing the event (and possibly passing it to
+ * user space for further processing).
+ */
+void pm_stay_awake(struct device *dev)
+{
+ unsigned long flags;
+
+ if (!dev)
+ return;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+ __pm_stay_awake(dev->power.wakeup);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_stay_awake);
+
+#ifdef CONFIG_PM_AUTOSLEEP
+static void update_prevent_sleep_time(struct wakeup_source *ws, ktime_t now)
+{
+ ktime_t delta = ktime_sub(now, ws->start_prevent_time);
+ ws->prevent_sleep_time = ktime_add(ws->prevent_sleep_time, delta);
+}
+#else
+static inline void update_prevent_sleep_time(struct wakeup_source *ws,
+ ktime_t now) {}
+#endif
+
+/**
+ * wakup_source_deactivate - Mark given wakeup source as inactive.
+ * @ws: Wakeup source to handle.
+ *
+ * Update the @ws' statistics and notify the PM core that the wakeup source has
+ * become inactive by decrementing the counter of wakeup events being processed
+ * and incrementing the counter of registered wakeup events.
+ */
+static void wakeup_source_deactivate(struct wakeup_source *ws)
+{
+ unsigned int cnt, inpr, cec;
+ ktime_t duration;
+ ktime_t now;
+
+ ws->relax_count++;
+ /*
+ * __pm_relax() may be called directly or from a timer function.
+ * If it is called directly right after the timer function has been
+ * started, but before the timer function calls __pm_relax(), it is
+ * possible that __pm_stay_awake() will be called in the meantime and
+ * will set ws->active. Then, ws->active may be cleared immediately
+ * by the __pm_relax() called from the timer function, but in such a
+ * case ws->relax_count will be different from ws->active_count.
+ */
+ if (ws->relax_count != ws->active_count) {
+ ws->relax_count--;
+
+ return;
+ }
+
+ ws->active = false;
+
+ now = ktime_get();
+ duration = ktime_sub(now, ws->last_time);
+ ws->total_time = ktime_add(ws->total_time, duration);
+ if (ktime_to_ns(duration) > ktime_to_ns(ws->max_time))
+ ws->max_time = duration;
+
+ ws->last_time = now;
+ del_timer(&ws->timer);
+ ws->timer_expires = 0;
+
+ if (ws->autosleep_enabled)
+ update_prevent_sleep_time(ws, now);
+
+ /*
+ * Increment the counter of registered wakeup events and decrement the
+ * couter of wakeup events in progress simultaneously.
+ */
+ cec = atomic_add_return(MAX_IN_PROGRESS, &combined_event_count);
+ trace_wakeup_source_deactivate(ws->name, cec);
+
+ split_counters(&cnt, &inpr);
+ if (!inpr && waitqueue_active(&wakeup_count_wait_queue))
+ wake_up(&wakeup_count_wait_queue);
+
+ zx_pm_suspend();
+ trace_unlock_wakesrc(ws);
+}
+
+/**
+ * __pm_relax - Notify the PM core that processing of a wakeup event has ended.
+ * @ws: Wakeup source object associated with the source of the event.
+ *
+ * Call this function for wakeup events whose processing started with calling
+ * __pm_stay_awake().
+ *
+ * It is safe to call it from interrupt context.
+ */
+void __pm_relax(struct wakeup_source *ws)
+{
+ unsigned long flags;
+
+ if (!ws)
+ return;
+
+ spin_lock_irqsave(&ws->lock, flags);
+ if (ws->active)
+ wakeup_source_deactivate(ws);
+ spin_unlock_irqrestore(&ws->lock, flags);
+}
+EXPORT_SYMBOL_GPL(__pm_relax);
+
+/**
+ * pm_relax - Notify the PM core that processing of a wakeup event has ended.
+ * @dev: Device that signaled the event.
+ *
+ * Execute __pm_relax() for the @dev's wakeup source object.
+ */
+void pm_relax(struct device *dev)
+{
+ unsigned long flags;
+
+ if (!dev)
+ return;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+ __pm_relax(dev->power.wakeup);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_relax);
+
+/**
+ * pm_wakeup_timer_fn - Delayed finalization of a wakeup event.
+ * @data: Address of the wakeup source object associated with the event source.
+ *
+ * Call wakeup_source_deactivate() for the wakeup source whose address is stored
+ * in @data if it is currently active and its timer has not been canceled and
+ * the expiration time of the timer is not in future.
+ */
+static void pm_wakeup_timer_fn(unsigned long data)
+{
+ struct wakeup_source *ws = (struct wakeup_source *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ws->lock, flags);
+
+ if (ws->active && ws->timer_expires
+ && time_after_eq(jiffies, ws->timer_expires)) {
+ wakeup_source_deactivate(ws);
+ ws->expire_count++;
+ }
+
+ spin_unlock_irqrestore(&ws->lock, flags);
+}
+
+/**
+ * __pm_wakeup_event - Notify the PM core of a wakeup event.
+ * @ws: Wakeup source object associated with the event source.
+ * @msec: Anticipated event processing time (in milliseconds).
+ *
+ * Notify the PM core of a wakeup event whose source is @ws that will take
+ * approximately @msec milliseconds to be processed by the kernel. If @ws is
+ * not active, activate it. If @msec is nonzero, set up the @ws' timer to
+ * execute pm_wakeup_timer_fn() in future.
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec)
+{
+ unsigned long flags;
+ unsigned long expires;
+
+ if (!ws)
+ return;
+
+ spin_lock_irqsave(&ws->lock, flags);
+
+ wakeup_source_report_event(ws);
+
+ if (!msec) {
+ wakeup_source_deactivate(ws);
+ goto unlock;
+ }
+
+ expires = jiffies + msecs_to_jiffies(msec);
+ if (!expires)
+ expires = 1;
+
+ if (!ws->timer_expires || time_after(expires, ws->timer_expires)) {
+ mod_timer(&ws->timer, expires);
+ ws->timer_expires = expires;
+ }
+
+ unlock:
+ spin_unlock_irqrestore(&ws->lock, flags);
+}
+EXPORT_SYMBOL_GPL(__pm_wakeup_event);
+
+
+/**
+ * pm_wakeup_event - Notify the PM core of a wakeup event.
+ * @dev: Device the wakeup event is related to.
+ * @msec: Anticipated event processing time (in milliseconds).
+ *
+ * Call __pm_wakeup_event() for the @dev's wakeup source object.
+ */
+void pm_wakeup_event(struct device *dev, unsigned int msec)
+{
+ unsigned long flags;
+
+ if (!dev)
+ return;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+ __pm_wakeup_event(dev->power.wakeup, msec);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_wakeup_event);
+
+static void print_active_wakeup_sources(void)
+{
+ struct wakeup_source *ws;
+ int active = 0;
+ struct wakeup_source *last_activity_ws = NULL;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(ws, &wakeup_sources, entry) {
+ if (ws->active) {
+ pr_info("active wakeup source: %s\n", ws->name);
+ active = 1;
+ } else if (!active &&
+ (!last_activity_ws ||
+ ktime_to_ns(ws->last_time) >
+ ktime_to_ns(last_activity_ws->last_time))) {
+ last_activity_ws = ws;
+ }
+ }
+
+ if (!active && last_activity_ws)
+ pr_info("last active wakeup source: %s\n",
+ last_activity_ws->name);
+ rcu_read_unlock();
+}
+
+/**
+ * pm_wakeup_pending - Check if power transition in progress should be aborted.
+ *
+ * Compare the current number of registered wakeup events with its preserved
+ * value from the past and return true if new wakeup events have been registered
+ * since the old value was stored. Also return true if the current number of
+ * wakeup events being processed is different from zero.
+ */
+bool pm_wakeup_pending(void)
+{
+ unsigned long flags;
+ bool ret = false;
+
+ spin_lock_irqsave(&events_lock, flags);
+ if (events_check_enabled) {
+ unsigned int cnt, inpr;
+
+ split_counters(&cnt, &inpr);
+ ret = (cnt != saved_count || inpr > 0);
+ events_check_enabled = !ret;
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+
+ if (ret)
+ print_active_wakeup_sources();
+
+ return ret;
+}
+
+/**
+ * pm_get_wakeup_count - Read the number of registered wakeup events.
+ * @count: Address to store the value at.
+ * @block: Whether or not to block.
+ *
+ * Store the number of registered wakeup events at the address in @count. If
+ * @block is set, block until the current number of wakeup events being
+ * processed is zero.
+ *
+ * Return 'false' if the current number of wakeup events being processed is
+ * nonzero. Otherwise return 'true'.
+ */
+bool pm_get_wakeup_count(unsigned int *count, bool block)
+{
+ unsigned int cnt, inpr;
+
+ if (block) {
+ DEFINE_WAIT(wait);
+
+ for (;;) {
+ prepare_to_wait(&wakeup_count_wait_queue, &wait,
+ TASK_INTERRUPTIBLE);
+ split_counters(&cnt, &inpr);
+ if (inpr == 0 || signal_pending(current))
+ break;
+
+ schedule();
+ }
+ finish_wait(&wakeup_count_wait_queue, &wait);
+ }
+
+ split_counters(&cnt, &inpr);
+ *count = cnt;
+ return !inpr;
+}
+
+/**
+ * pm_save_wakeup_count - Save the current number of registered wakeup events.
+ * @count: Value to compare with the current number of registered wakeup events.
+ *
+ * If @count is equal to the current number of registered wakeup events and the
+ * current number of wakeup events being processed is zero, store @count as the
+ * old number of registered wakeup events for pm_check_wakeup_events(), enable
+ * wakeup events detection and return 'true'. Otherwise disable wakeup events
+ * detection and return 'false'.
+ */
+bool pm_save_wakeup_count(unsigned int count)
+{
+ unsigned int cnt, inpr;
+ unsigned long flags;
+
+ events_check_enabled = false;
+ spin_lock_irqsave(&events_lock, flags);
+ split_counters(&cnt, &inpr);
+ if (cnt == count && inpr == 0) {
+ saved_count = count;
+ events_check_enabled = true;
+ }
+ spin_unlock_irqrestore(&events_lock, flags);
+ return events_check_enabled;
+}
+
+#ifdef CONFIG_PM_AUTOSLEEP
+/**
+ * pm_wakep_autosleep_enabled - Modify autosleep_enabled for all wakeup sources.
+ * @enabled: Whether to set or to clear the autosleep_enabled flags.
+ */
+void pm_wakep_autosleep_enabled(bool set)
+{
+ struct wakeup_source *ws;
+ ktime_t now = ktime_get();
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(ws, &wakeup_sources, entry) {
+ spin_lock_irq(&ws->lock);
+ if (ws->autosleep_enabled != set) {
+ ws->autosleep_enabled = set;
+ if (ws->active) {
+ if (set)
+ ws->start_prevent_time = now;
+ else
+ update_prevent_sleep_time(ws, now);
+ }
+ }
+ spin_unlock_irq(&ws->lock);
+ }
+ rcu_read_unlock();
+}
+#endif /* CONFIG_PM_AUTOSLEEP */
+
+static struct dentry *wakeup_sources_stats_dentry;
+
+/**
+ * print_wakeup_source_stats - Print wakeup source statistics information.
+ * @m: seq_file to print the statistics into.
+ * @ws: Wakeup source object to print the statistics for.
+ */
+static int print_wakeup_source_stats(struct seq_file *m,
+ struct wakeup_source *ws)
+{
+ unsigned long flags;
+ ktime_t total_time;
+ ktime_t max_time;
+ unsigned long active_count;
+ ktime_t active_time;
+ ktime_t prevent_sleep_time;
+ int ret;
+
+ spin_lock_irqsave(&ws->lock, flags);
+
+ total_time = ws->total_time;
+ max_time = ws->max_time;
+ prevent_sleep_time = ws->prevent_sleep_time;
+ active_count = ws->active_count;
+ if (ws->active) {
+ ktime_t now = ktime_get();
+
+ active_time = ktime_sub(now, ws->last_time);
+ total_time = ktime_add(total_time, active_time);
+ if (active_time.tv64 > max_time.tv64)
+ max_time = active_time;
+
+ if (ws->autosleep_enabled)
+ prevent_sleep_time = ktime_add(prevent_sleep_time,
+ ktime_sub(now, ws->start_prevent_time));
+ } else {
+ active_time = ktime_set(0, 0);
+ }
+
+ ret = seq_printf(m, "%-12s\t%lu\t\t%lu\t\t%lu\t\t%lu\t\t"
+ "%lld\t\t%lld\t\t%lld\t\t%lld\t\t%lld\n",
+ ws->name, active_count, ws->event_count,
+ ws->wakeup_count, ws->expire_count,
+ ktime_to_ms(active_time), ktime_to_ms(total_time),
+ ktime_to_ms(max_time), ktime_to_ms(ws->last_time),
+ ktime_to_ms(prevent_sleep_time));
+
+ spin_unlock_irqrestore(&ws->lock, flags);
+
+ return ret;
+}
+
+/**
+ * wakeup_sources_stats_show - Print wakeup sources statistics information.
+ * @m: seq_file to print the statistics into.
+ */
+static int wakeup_sources_stats_show(struct seq_file *m, void *unused)
+{
+ struct wakeup_source *ws;
+
+ seq_puts(m, "name\t\tactive_count\tevent_count\twakeup_count\t"
+ "expire_count\tactive_since\ttotal_time\tmax_time\t"
+ "last_change\tprevent_suspend_time\n");
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(ws, &wakeup_sources, entry)
+ print_wakeup_source_stats(m, ws);
+ rcu_read_unlock();
+
+ return 0;
+}
+
+static int wakeup_sources_stats_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wakeup_sources_stats_show, NULL);
+}
+
+static const struct file_operations wakeup_sources_stats_fops = {
+ .owner = THIS_MODULE,
+ .open = wakeup_sources_stats_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init wakeup_sources_debugfs_init(void)
+{
+ wakeup_sources_stats_dentry = debugfs_create_file("wakeup_sources",
+ S_IRUGO, NULL, NULL, &wakeup_sources_stats_fops);
+ return 0;
+}
+
+postcore_initcall(wakeup_sources_debugfs_init);
diff --git a/ap/os/linux/linux-3.4.x/drivers/base/power/zx-suspend.c b/ap/os/linux/linux-3.4.x/drivers/base/power/zx-suspend.c
new file mode 100644
index 0000000..9caddfd
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/base/power/zx-suspend.c
@@ -0,0 +1,229 @@
+/* drivers/base/power/zx-suspend.c
+ *
+ * ZTE suspend manager
+ *
+ * Copyright (C) 2013 ZTE Ltd.
+ * by zxp
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/suspend.h>
+#include <linux/syscalls.h> /* sys_sync */
+#include <linux/wakelock.h>
+#include "power.h"
+
+//#define CONFIG_LINUX_AUTOSLEEP /* may like MTK code to use linux autosleep interface */
+
+static struct workqueue_struct *sync_work_queue;
+static struct wake_lock sync_wake_lock;
+
+static struct workqueue_struct *suspend_work_queue;
+static struct wake_lock main_wake_lock;
+static struct wake_lock wakeup_irq_lock;
+static suspend_state_t requested_suspend_state = PM_SUSPEND_MEM;
+static bool zx_pm_init = false;
+static unsigned int suspend_state = 0;
+static DEFINE_MUTEX(suspend_lock);
+static DEFINE_SPINLOCK(zx_suspend_lock);
+
+
+extern void pm_debug_wakelocks(void);
+extern bool pm_disable_suspend(void);
+
+enum {
+ DEBUG_EXIT_SUSPEND = 1U << 0,
+ DEBUG_WAKE_LOCK = 1U << 1,
+ DEBUG_SUSPEND = 1U << 2,
+};
+
+static int debug_mask = DEBUG_EXIT_SUSPEND | /* DEBUG_WAKE_LOCK |*/ DEBUG_SUSPEND;
+/* /sys/module/zx-suspend/parameters/debug_mask */
+module_param(debug_mask, int, 0644);
+
+
+static void sync_system(struct work_struct *work)
+{
+ sys_sync();
+ wake_unlock(&sync_wake_lock);
+
+ if (debug_mask & DEBUG_SUSPEND)
+ pr_info("[SLP]: sync done\n");
+}
+
+static DECLARE_WORK(sync_system_work, sync_system);
+
+void test_wakelock(void)
+{
+#ifndef CONFIG_ZX_AUTOSLEEP
+ wake_lock(&sync_wake_lock);
+ queue_work(sync_work_queue, &sync_system_work);
+#endif
+
+ wake_unlock(&main_wake_lock);
+}
+
+#ifdef CONFIG_ZX_AUTOSLEEP
+void app_start_done(void)
+{
+ wake_unlock(&main_wake_lock);
+}
+EXPORT_SYMBOL_GPL(app_start_done);
+#endif
+
+extern volatile int wakelock_current_event_num;
+static void suspend(struct work_struct *work)
+{
+ int ret;
+ int entry_event_num;
+ struct timespec ts_entry, ts_exit;
+
+ mutex_lock(&suspend_lock);
+ suspend_state = 1;
+ entry_event_num = wakelock_current_event_num;
+#ifdef CONFIG_ZX_AUTOSLEEP
+ sys_sync();
+#endif
+
+ getnstimeofday(&ts_entry);
+ ret = pm_suspend(requested_suspend_state);
+ getnstimeofday(&ts_exit);
+
+ if (debug_mask & DEBUG_EXIT_SUSPEND) {
+ struct rtc_time tm;
+ rtc_time_to_tm(ts_exit.tv_sec, &tm);
+ pr_info("[SLP]: exit suspend, ret = %d "
+ "(%d-%02d-%02d %02d:%02d:%02d.%09lu UTC)\n", ret,
+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec, ts_exit.tv_nsec);
+ }
+#ifdef CONFIG_ZX_AUTOSLEEP
+// wake_lock_timeout(&main_wake_lock, 2 ); /* 2 jiffies */
+ if(wakelock_current_event_num == entry_event_num)
+ wake_lock_timeout(&main_wake_lock, msecs_to_jiffies(1*1000));
+#else
+ wake_lock(&main_wake_lock);
+#endif
+
+ suspend_state = 0;
+ mutex_unlock(&suspend_lock);
+
+}
+
+static DECLARE_WORK(suspend_work, suspend);
+
+/**
+ * zx_pm_suspend
+ *
+ * try suspend when wakelock is unlocked or expired anytime.
+ *
+ */
+void zx_pm_suspend(void)
+{
+
+#if 1
+ //if(!zx_pm_init)
+ return ;
+#else
+ unsigned int temp_count;
+ unsigned long flags;
+
+ if(!zx_pm_init)
+ return ;
+
+ if(pm_disable_suspend())
+ return;
+
+ if (debug_mask & DEBUG_WAKE_LOCK)
+ pm_debug_wakelocks();
+
+ spin_lock_irqsave(&zx_suspend_lock, flags);
+ if(pm_get_wakeup_count(&temp_count, false))
+ {
+ if (pm_save_wakeup_count(temp_count))
+ {
+ spin_unlock_irqrestore(&zx_suspend_lock, flags);
+ if (!suspend_state)
+ queue_work(suspend_work_queue, &suspend_work);
+
+ pm_get_wakeup_count(&temp_count, false);
+ }
+ else
+ {
+ spin_unlock_irqrestore(&zx_suspend_lock, flags);
+ //error save the count, why?
+ if (debug_mask & DEBUG_SUSPEND)
+ {
+ pr_info("suspend: error save wakeup_count: %d ", temp_count);
+ }
+ }
+ }
+ else
+ {
+ spin_unlock_irqrestore(&zx_suspend_lock, flags);
+ }
+#endif
+
+}
+EXPORT_SYMBOL_GPL(zx_pm_suspend);
+
+void zx_pm_wakeup_irq_timeout(void)
+{
+ if (!zx_pm_init)
+ return;
+ wake_lock_timeout(&wakeup_irq_lock, msecs_to_jiffies(1*1000));
+}
+EXPORT_SYMBOL_GPL(zx_pm_wakeup_irq_timeout);
+static int __init zx_suspend_init(void)
+{
+ int ret;
+
+ /* we init a main wakelock for maintain system on until app start ok! */
+ wake_lock_init(&main_wake_lock, WAKE_LOCK_SUSPEND, "main");
+ wake_lock_init(&sync_wake_lock, WAKE_LOCK_SUSPEND, "sync_system");
+ wake_lock_init(&wakeup_irq_lock, WAKE_LOCK_SUSPEND, "wakeup_irq");
+// wake_lock(&main_wake_lock);
+ wake_lock_timeout(&main_wake_lock, msecs_to_jiffies(60*1000));
+
+ suspend_work_queue = create_singlethread_workqueue("suspend");
+ if (suspend_work_queue == NULL)
+ {
+ ret = -ENOMEM;
+ goto err_suspend_work_queue;
+ }
+
+ sync_work_queue = create_singlethread_workqueue("sync_system_work");
+ if (sync_work_queue == NULL) {
+ pr_err("%s: failed to create sync_work_queue\n", __func__);
+ ret = -ENOMEM;
+ goto err_sync_work_queue;
+ }
+
+ zx_pm_init = true;
+
+ return 0;
+
+err_sync_work_queue:
+ destroy_workqueue(suspend_work_queue);
+
+err_suspend_work_queue:
+ wake_lock_destroy(&main_wake_lock);
+ wake_lock_destroy(&sync_wake_lock);
+
+ return ret;
+}
+
+static void __exit zx_suspend_exit(void)
+{
+ destroy_workqueue(sync_work_queue);
+ destroy_workqueue(suspend_work_queue);
+
+ wake_lock_destroy(&sync_wake_lock);
+ wake_lock_destroy(&main_wake_lock);
+}
+
+late_initcall(zx_suspend_init);
+module_exit(zx_suspend_exit);
+