zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/hwmon/Kconfig b/ap/os/linux/linux-3.4.x/drivers/hwmon/Kconfig
new file mode 100644
index 0000000..8deedc1
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/hwmon/Kconfig
@@ -0,0 +1,1407 @@
+#
+# Hardware monitoring chip drivers configuration
+#
+
+menuconfig HWMON
+ tristate "Hardware Monitoring support"
+ depends on HAS_IOMEM
+ default y
+ help
+ Hardware monitoring devices let you monitor the hardware health
+ of a system. Most modern motherboards include such a device. It
+ can include temperature sensors, voltage sensors, fan speed
+ sensors and various additional features such as the ability to
+ control the speed of the fans. If you want this support you
+ should say Y here and also to the specific driver(s) for your
+ sensors chip(s) below.
+
+ To find out which specific driver(s) you need, use the
+ sensors-detect script from the lm_sensors package. Read
+ <file:Documentation/hwmon/userspace-tools> for details.
+
+ This support can also be built as a module. If so, the module
+ will be called hwmon.
+
+if HWMON
+
+config HWMON_VID
+ tristate
+ default n
+
+config HWMON_DEBUG_CHIP
+ bool "Hardware Monitoring Chip debugging messages"
+ default n
+ help
+ Say Y here if you want the I2C chip drivers to produce a bunch of
+ debug messages to the system log. Select this if you are having
+ a problem with I2C support and want to see more of what is going
+ on.
+
+comment "Native drivers"
+
+config SENSORS_ABITUGURU
+ tristate "Abit uGuru (rev 1 & 2)"
+ depends on X86 && DMI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the first
+ and second revision of the Abit uGuru chip. The voltage and frequency
+ control parts of the Abit uGuru are not supported. The Abit uGuru
+ chip can be found on Abit uGuru featuring motherboards (most modern
+ Abit motherboards from before end 2005). For more info and a list
+ of which motherboards have which revision see
+ Documentation/hwmon/abituguru
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru.
+
+config SENSORS_ABITUGURU3
+ tristate "Abit uGuru (rev 3)"
+ depends on X86 && DMI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the sensor part of the
+ third revision of the Abit uGuru chip. Only reading the sensors
+ and their settings is supported. The third revision of the Abit
+ uGuru chip can be found on recent Abit motherboards (since end
+ 2005). For more info and a list of which motherboards have which
+ revision see Documentation/hwmon/abituguru3
+
+ This driver can also be built as a module. If so, the module
+ will be called abituguru3.
+
+config SENSORS_AD7314
+ tristate "Analog Devices AD7314 and compatibles"
+ depends on SPI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7314, ADT7301 and ADT7302 temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7314.
+
+config SENSORS_AD7414
+ tristate "Analog Devices AD7414"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7414 temperature monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7414.
+
+config SENSORS_AD7418
+ tristate "Analog Devices AD7416, AD7417 and AD7418"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ AD7416, AD7417 and AD7418 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called ad7418.
+
+config SENSORS_ADCXX
+ tristate "National Semiconductor ADCxxxSxxx"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ If you say yes here you get support for the National Semiconductor
+ ADC<bb><c>S<sss> chip family, where
+ * bb is the resolution in number of bits (8, 10, 12)
+ * c is the number of channels (1, 2, 4, 8)
+ * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+ kSPS and 101 for 1 MSPS)
+
+ Examples : ADC081S101, ADC124S501, ...
+
+ This driver can also be built as a module. If so, the module
+ will be called adcxx.
+
+config SENSORS_ADM1021
+ tristate "Analog Devices ADM1021 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for Analog Devices ADM1021
+ and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
+ Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1021.
+
+config SENSORS_ADM1025
+ tristate "Analog Devices ADM1025 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for Analog Devices ADM1025
+ and Philips NE1619 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1025.
+
+config SENSORS_ADM1026
+ tristate "Analog Devices ADM1026 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for Analog Devices ADM1026
+ sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1026.
+
+config SENSORS_ADM1029
+ tristate "Analog Devices ADM1029"
+ depends on I2C
+ help
+ If you say yes here you get support for Analog Devices ADM1029
+ sensor chip.
+ Very rare chip, please let us know you use it.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1029.
+
+config SENSORS_ADM1031
+ tristate "Analog Devices ADM1031 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for Analog Devices ADM1031
+ and ADM1030 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm1031.
+
+config SENSORS_ADM9240
+ tristate "Analog Devices ADM9240 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for Analog Devices ADM9240,
+ Dallas DS1780, National Semiconductor LM81 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adm9240.
+
+config SENSORS_ADT7411
+ tristate "Analog Devices ADT7411"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7411 voltage and temperature monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7411.
+
+config SENSORS_ADT7462
+ tristate "Analog Devices ADT7462"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7462 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7462.
+
+config SENSORS_ADT7470
+ tristate "Analog Devices ADT7470"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7470 temperature monitoring chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called adt7470.
+
+config SENSORS_ADT7475
+ tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
+ chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called adt7475.
+
+config SENSORS_ASC7621
+ tristate "Andigilog aSC7621"
+ depends on I2C
+ help
+ If you say yes here you get support for the aSC7621
+ family of SMBus sensors chip found on most Intel X38, X48, X58,
+ 945, 965 and 975 desktop boards. Currently supported chips:
+ aSC7621
+ aSC7621a
+
+ This driver can also be built as a module. If so, the module
+ will be called asc7621.
+
+config SENSORS_K8TEMP
+ tristate "AMD Athlon64/FX or Opteron temperature sensor"
+ depends on X86 && PCI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the temperature
+ sensor(s) inside your CPU. Supported is whole AMD K8
+ microarchitecture. Please note that you will need at least
+ lm-sensors 2.10.1 for proper userspace support.
+
+ This driver can also be built as a module. If so, the module
+ will be called k8temp.
+
+config SENSORS_K10TEMP
+ tristate "AMD Family 10h+ temperature sensor"
+ depends on X86 && PCI
+ help
+ If you say yes here you get support for the temperature
+ sensor(s) inside your CPU. Supported are later revisions of
+ the AMD Family 10h and all revisions of the AMD Family 11h,
+ 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
+ microarchitectures.
+
+ This driver can also be built as a module. If so, the module
+ will be called k10temp.
+
+config SENSORS_FAM15H_POWER
+ tristate "AMD Family 15h processor power"
+ depends on X86 && PCI
+ help
+ If you say yes here you get support for processor power
+ information of your AMD family 15h CPU.
+
+ This driver can also be built as a module. If so, the module
+ will be called fam15h_power.
+
+config SENSORS_ASB100
+ tristate "Asus ASB100 Bach"
+ depends on X86 && I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the ASB100 Bach sensor
+ chip found on some Asus mainboards.
+
+ This driver can also be built as a module. If so, the module
+ will be called asb100.
+
+config SENSORS_ATXP1
+ tristate "Attansic ATXP1 VID controller"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Attansic ATXP1 VID
+ controller.
+
+ If your board have such a chip, you are able to control your CPU
+ core and other voltages.
+
+ This driver can also be built as a module. If so, the module
+ will be called atxp1.
+
+config SENSORS_DS620
+ tristate "Dallas Semiconductor DS620"
+ depends on I2C
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS620 sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds620.
+
+config SENSORS_DS1621
+ tristate "Dallas Semiconductor DS1621 and DS1625"
+ depends on I2C
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS1621 and DS1625 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds1621.
+
+config SENSORS_EXYNOS4_TMU
+ tristate "Temperature sensor on Samsung EXYNOS4"
+ depends on ARCH_EXYNOS4
+ help
+ If you say yes here you get support for TMU (Thermal Managment
+ Unit) on SAMSUNG EXYNOS4 series of SoC.
+
+ This driver can also be built as a module. If so, the module
+ will be called exynos4-tmu.
+
+config SENSORS_I5K_AMB
+ tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
+ depends on PCI && EXPERIMENTAL
+ help
+ If you say yes here you get support for FB-DIMM AMB temperature
+ monitoring chips on systems with the Intel 5000 series chipset.
+
+ This driver can also be built as a module. If so, the module
+ will be called i5k_amb.
+
+config SENSORS_F71805F
+ tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+ depends on !PPC
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+ Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called f71805f.
+
+config SENSORS_F71882FG
+ tristate "Fintek F71882FG and compatibles"
+ depends on !PPC
+ help
+ If you say yes here you get support for hardware monitoring
+ features of many Fintek Super-I/O (LPC) chips. The currently
+ supported chips are:
+ F71808E/A
+ F71858FG
+ F71862FG
+ F71863FG
+ F71869F/E/A
+ F71882FG
+ F71883FG
+ F71889FG/ED/A
+ F8000
+ F81801U
+ F81865F
+
+ This driver can also be built as a module. If so, the module
+ will be called f71882fg.
+
+config SENSORS_F75375S
+ tristate "Fintek F75375S/SP, F75373 and F75387"
+ depends on I2C
+ help
+ If you say yes here you get support for hardware monitoring
+ features of the Fintek F75375S/SP, F75373 and F75387
+
+ This driver can also be built as a module. If so, the module
+ will be called f75375s.
+
+config SENSORS_FSCHMD
+ tristate "Fujitsu Siemens Computers sensor chips"
+ depends on X86 && I2C
+ help
+ If you say yes here you get support for the following Fujitsu
+ Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
+ Heimdall, Heracles, Hades and Syleus including support for the
+ integrated watchdog.
+
+ This is a merged driver for FSC sensor chips replacing the fscpos,
+ fscscy and fscher drivers and adding support for several other FSC
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called fschmd.
+
+config SENSORS_G760A
+ tristate "GMT G760A"
+ depends on I2C
+ help
+ If you say yes here you get support for Global Mixed-mode
+ Technology Inc G760A fan speed PWM controller chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called g760a.
+
+config SENSORS_GL518SM
+ tristate "Genesys Logic GL518SM"
+ depends on I2C
+ help
+ If you say yes here you get support for Genesys Logic GL518SM
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called gl518sm.
+
+config SENSORS_GL520SM
+ tristate "Genesys Logic GL520SM"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for Genesys Logic GL520SM
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called gl520sm.
+
+config SENSORS_GPIO_FAN
+ tristate "GPIO fan"
+ depends on GPIOLIB
+ help
+ If you say yes here you get support for fans connected to GPIO lines.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-fan.
+
+config SENSORS_CORETEMP
+ tristate "Intel Core/Core2/Atom temperature sensor"
+ depends on X86 && PCI && EXPERIMENTAL
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Most of the family 6 CPUs
+ are supported. Check Documentation/hwmon/coretemp for details.
+
+config SENSORS_IBMAEM
+ tristate "IBM Active Energy Manager temperature/power sensors and control"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors and capping hardware in various IBM System X
+ servers that support Active Energy Manager. This includes
+ the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+ and certain HC10/HS2x/LS2x/QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmaem.
+
+config SENSORS_IBMPEX
+ tristate "IBM PowerExecutive temperature/power sensors"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors in various IBM System X servers that support
+ PowerExecutive. So far this includes the x3350, x3550, x3650,
+ x3655, and x3755; the x3800, x3850, and x3950 models that have
+ PCI Express; and some of the HS2x, LS2x, and QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmpex.
+
+config SENSORS_IT87
+ tristate "ITE IT87xx and compatibles"
+ depends on !PPC
+ select HWMON_VID
+ help
+ If you say yes here you get support for ITE IT8705F, IT8712F,
+ IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F and IT8758E
+ sensor chips, and the SiS960 clone.
+
+ This driver can also be built as a module. If so, the module
+ will be called it87.
+
+config SENSORS_JZ4740
+ tristate "Ingenic JZ4740 SoC ADC driver"
+ depends on MACH_JZ4740 && MFD_JZ4740_ADC
+ help
+ If you say yes here you get support for reading adc values from the ADCIN
+ pin on Ingenic JZ4740 SoC based boards.
+
+ This driver can also be build as a module. If so, the module will be
+ called jz4740-hwmon.
+
+config SENSORS_JC42
+ tristate "JEDEC JC42.4 compliant memory module temperature sensors"
+ depends on I2C
+ help
+ If you say yes here, you get support for JEDEC JC42.4 compliant
+ temperature sensors, which are used on many DDR3 memory modules for
+ mobile devices and servers. Support will include, but not be limited
+ to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
+ MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
+ STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
+
+ This driver can also be built as a module. If so, the module
+ will be called jc42.
+
+config SENSORS_LINEAGE
+ tristate "Lineage Compact Power Line Power Entry Module"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Lineage Compact Power Line
+ series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
+ CP2000DC, CP2725, and others.
+
+ This driver can also be built as a module. If so, the module
+ will be called lineage-pem.
+
+config SENSORS_LM63
+ tristate "National Semiconductor LM63 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for the National
+ Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
+ sensors with integrated fan control. Such chips are found
+ on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
+ others.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm63.
+
+config SENSORS_LM70
+ tristate "National Semiconductor LM70 / Texas Instruments TMP121"
+ depends on SPI_MASTER
+ help
+ If you say yes here you get support for the National Semiconductor
+ LM70 and Texas Instruments TMP121/TMP123 digital temperature
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm70.
+
+config SENSORS_LM73
+ tristate "National Semiconductor LM73"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM73
+ sensor chips.
+ This driver can also be built as a module. If so, the module
+ will be called lm73.
+
+config SENSORS_LM75
+ tristate "National Semiconductor LM75 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for one common type of
+ temperature sensor chip, with models including:
+
+ - Analog Devices ADT75
+ - Dallas Semiconductor DS75 and DS1775
+ - Maxim MAX6625 and MAX6626
+ - Microchip MCP980x
+ - National Semiconductor LM75, LM75A
+ - NXP's LM75A
+ - ST Microelectronics STDS75
+ - TelCom (now Microchip) TCN75
+ - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
+ TMP275
+
+ This driver supports driver model based binding through board
+ specific I2C device tables.
+
+ It also supports the "legacy" style of driver binding. To use
+ that with some chips which don't replicate LM75 quirks exactly,
+ you may need the "force" module parameter.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm75.
+
+config SENSORS_LM77
+ tristate "National Semiconductor LM77"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM77
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm77.
+
+config SENSORS_LM78
+ tristate "National Semiconductor LM78 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM78,
+ LM78-J and LM79.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm78.
+
+config SENSORS_LM80
+ tristate "National Semiconductor LM80 and LM96080"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor
+ LM80 and LM96080 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm80.
+
+config SENSORS_LM83
+ tristate "National Semiconductor LM83 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor
+ LM82 and LM83 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm83.
+
+config SENSORS_LM85
+ tristate "National Semiconductor LM85 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM85
+ sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
+ EMC6D101, EMC6D102, and EMC6D103.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm85.
+
+config SENSORS_LM87
+ tristate "National Semiconductor LM87 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM87
+ and Analog Devices ADM1024 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm87.
+
+config SENSORS_LM90
+ tristate "National Semiconductor LM90 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM90,
+ LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
+ Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+ MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
+ Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm90.
+
+config SENSORS_LM92
+ tristate "National Semiconductor LM92 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM92
+ and Maxim MAX6635 sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm92.
+
+config SENSORS_LM93
+ tristate "National Semiconductor LM93 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for National Semiconductor LM93,
+ LM94, and compatible sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm93.
+
+config SENSORS_LTC4151
+ tristate "Linear Technology LTC4151"
+ depends on I2C
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4151
+ High Voltage I2C Current and Voltage Monitor interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4151.
+
+config SENSORS_LTC4215
+ tristate "Linear Technology LTC4215"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4215
+ Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4215.
+
+config SENSORS_LTC4245
+ tristate "Linear Technology LTC4245"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4245
+ Multiple Supply Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4245.
+
+config SENSORS_LTC4261
+ tristate "Linear Technology LTC4261"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4261
+ Negative Voltage Hot Swap Controller I2C interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc4261.
+
+config SENSORS_LM95241
+ tristate "National Semiconductor LM95241 and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for LM95231 and LM95241 sensor
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm95241.
+
+config SENSORS_LM95245
+ tristate "National Semiconductor LM95245 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for LM95245 sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called lm95245.
+
+config SENSORS_MAX1111
+ tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+ depends on SPI_MASTER
+ help
+ Say y here to support Maxim's MAX1111 ADC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1111.
+
+config SENSORS_MAX16065
+ tristate "Maxim MAX16065 System Manager and compatibles"
+ depends on I2C
+ help
+ If you say yes here you get support for hardware monitoring
+ capabilities of the following Maxim System Manager chips.
+ MAX16065
+ MAX16066
+ MAX16067
+ MAX16068
+ MAX16070
+ MAX16071
+
+ This driver can also be built as a module. If so, the module
+ will be called max16065.
+
+config SENSORS_MAX1619
+ tristate "Maxim MAX1619 sensor chip"
+ depends on I2C
+ help
+ If you say yes here you get support for MAX1619 sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1619.
+
+config SENSORS_MAX1668
+ tristate "Maxim MAX1668 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for MAX1668, MAX1989 and
+ MAX1805 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1668.
+
+config SENSORS_MAX6639
+ tristate "Maxim MAX6639 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the MAX6639
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max6639.
+
+config SENSORS_MAX6642
+ tristate "Maxim MAX6642 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for MAX6642 sensor chip.
+ MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
+ with Overtemperature Alarm from Maxim.
+
+ This driver can also be built as a module. If so, the module
+ will be called max6642.
+
+config SENSORS_MAX6650
+ tristate "Maxim MAX6650 sensor chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the MAX6650 / MAX6651
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max6650.
+
+config SENSORS_MCP3021
+ tristate "Microchip MCP3021"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the MCP3021 chip
+ that is a A/D converter (ADC) with 10-bit resolution.
+
+ This driver can also be built as a module. If so, the module
+ will be called mcp3021.
+
+config SENSORS_NTC_THERMISTOR
+ tristate "NTC thermistor support"
+ depends on EXPERIMENTAL
+ help
+ This driver supports NTC thermistors sensor reading and its
+ interpretation. The driver can also monitor the temperature and
+ send notifications about the temperature.
+
+ Currently, this driver supports
+ NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+
+ This driver can also be built as a module. If so, the module
+ will be called ntc-thermistor.
+
+config SENSORS_PC87360
+ tristate "National Semiconductor PC87360 family"
+ depends on !PPC
+ select HWMON_VID
+ help
+ If you say yes here you get access to the hardware monitoring
+ functions of the National Semiconductor PC8736x Super-I/O chips.
+ The PC87360, PC87363 and PC87364 only have fan monitoring and
+ control. The PC87365 and PC87366 additionally have voltage and
+ temperature monitoring.
+
+ This driver can also be built as a module. If so, the module
+ will be called pc87360.
+
+config SENSORS_PC87427
+ tristate "National Semiconductor PC87427"
+ depends on !PPC
+ help
+ If you say yes here you get access to the hardware monitoring
+ functions of the National Semiconductor PC87427 Super-I/O chip.
+ The chip has two distinct logical devices, one for fan speed
+ monitoring and control, and one for voltage and temperature
+ monitoring. Fan speed monitoring and control are supported, as
+ well as temperature monitoring. Voltages aren't supported yet.
+
+ This driver can also be built as a module. If so, the module
+ will be called pc87427.
+
+config SENSORS_PCF8591
+ tristate "Philips PCF8591 ADC/DAC"
+ depends on I2C
+ default n
+ help
+ If you say yes here you get support for Philips PCF8591 4-channel
+ ADC, 1-channel DAC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called pcf8591.
+
+ These devices are hard to detect and rarely found on mainstream
+ hardware. If unsure, say N.
+
+source drivers/hwmon/pmbus/Kconfig
+
+config SENSORS_SHT15
+ tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+ depends on GPIOLIB
+ help
+ If you say yes here you get support for the Sensiron SHT10, SHT11,
+ SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht15.
+
+config SENSORS_SHT21
+ tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
+ depends on I2C
+ help
+ If you say yes here you get support for the Sensiron SHT21, SHT25
+ humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht21.
+
+config SENSORS_S3C
+ tristate "Samsung built-in ADC"
+ depends on S3C_ADC
+ help
+ If you say yes here you get support for the on-board ADCs of
+ the Samsung S3C24XX, S3C64XX and other series of SoC
+
+ This driver can also be built as a module. If so, the module
+ will be called s3c-hwmon.
+
+config SENSORS_S3C_RAW
+ bool "Include raw channel attributes in sysfs"
+ depends on SENSORS_S3C
+ help
+ Say Y here if you want to include raw copies of all the ADC
+ channels in sysfs.
+
+config SENSORS_SIS5595
+ tristate "Silicon Integrated Systems Corp. SiS5595"
+ depends on PCI
+ help
+ If you say yes here you get support for the integrated sensors in
+ SiS5595 South Bridges.
+
+ This driver can also be built as a module. If so, the module
+ will be called sis5595.
+
+config SENSORS_SMM665
+ tristate "Summit Microelectronics SMM665"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for the hardware monitoring
+ features of the Summit Microelectronics SMM665/SMM665B Six-Channel
+ Active DC Output Controller / Monitor.
+
+ Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
+ Support for those chips is untested.
+
+ This driver can also be built as a module. If so, the module will
+ be called smm665.
+
+config SENSORS_DME1737
+ tristate "SMSC DME1737, SCH311x and compatibles"
+ depends on I2C && EXPERIMENTAL && !PPC
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware monitoring
+ and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+ Asus A8000 Super-I/O chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called dme1737.
+
+config SENSORS_EMC1403
+ tristate "SMSC EMC1403/23 thermal sensor"
+ depends on I2C
+ help
+ If you say yes here you get support for the SMSC EMC1403/23
+ temperature monitoring chip.
+
+ Threshold values can be configured using sysfs.
+ Data from the different diodes are accessible via sysfs.
+
+config SENSORS_EMC2103
+ tristate "SMSC EMC2103"
+ depends on I2C
+ help
+ If you say yes here you get support for the temperature
+ and fan sensors of the SMSC EMC2103 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called emc2103.
+
+config SENSORS_EMC6W201
+ tristate "SMSC EMC6W201"
+ depends on I2C
+ help
+ If you say yes here you get support for the SMSC EMC6W201
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called emc6w201.
+
+config SENSORS_SMSC47M1
+ tristate "SMSC LPC47M10x and compatibles"
+ depends on !PPC
+ help
+ If you say yes here you get support for the integrated fan
+ monitoring and control capabilities of the SMSC LPC47B27x,
+ LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
+ LPC47M192, LPC47M292 and LPC47M997 chips.
+
+ The temperature and voltage sensor features of the LPC47M15x,
+ LPC47M192, LPC47M292 and LPC47M997 are supported by another
+ driver, select also "SMSC LPC47M192 and compatibles" below for
+ those.
+
+ This driver can also be built as a module. If so, the module
+ will be called smsc47m1.
+
+config SENSORS_SMSC47M192
+ tristate "SMSC LPC47M192 and compatibles"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for the temperature and
+ voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
+ and LPC47M997 chips.
+
+ The fan monitoring and control capabilities of these chips
+ are supported by another driver, select
+ "SMSC LPC47M10x and compatibles" above. You need both drivers
+ if you want fan control and voltage/temperature sensor support.
+
+ This driver can also be built as a module. If so, the module
+ will be called smsc47m192.
+
+config SENSORS_SMSC47B397
+ tristate "SMSC LPC47B397-NC"
+ depends on EXPERIMENTAL && !PPC
+ help
+ If you say yes here you get support for the SMSC LPC47B397-NC
+ sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called smsc47b397.
+
+config SENSORS_SCH56XX_COMMON
+ tristate
+ default n
+
+config SENSORS_SCH5627
+ tristate "SMSC SCH5627"
+ depends on !PPC
+ select SENSORS_SCH56XX_COMMON
+ help
+ If you say yes here you get support for the hardware monitoring
+ features of the SMSC SCH5627 Super-I/O chip including support for
+ the integrated watchdog.
+
+ This driver can also be built as a module. If so, the module
+ will be called sch5627.
+
+config SENSORS_SCH5636
+ tristate "SMSC SCH5636"
+ depends on !PPC
+ select SENSORS_SCH56XX_COMMON
+ help
+ SMSC SCH5636 Super I/O chips include an embedded microcontroller for
+ hardware monitoring solutions, allowing motherboard manufacturers to
+ create their own custom hwmon solution based upon the SCH5636.
+
+ Currently this driver only supports the Fujitsu Theseus SCH5636 based
+ hwmon solution. Say yes here if you want support for the Fujitsu
+ Theseus' hardware monitoring features including support for the
+ integrated watchdog.
+
+ This driver can also be built as a module. If so, the module
+ will be called sch5636.
+
+config SENSORS_ADS1015
+ tristate "Texas Instruments ADS1015"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments ADS1015
+ 12-bit 4-input ADC device.
+
+ This driver can also be built as a module. If so, the module
+ will be called ads1015.
+
+config SENSORS_ADS7828
+ tristate "Texas Instruments ADS7828"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments ADS7828
+ 12-bit 8-channel ADC device.
+
+ This driver can also be built as a module. If so, the module
+ will be called ads7828.
+
+config SENSORS_ADS7871
+ tristate "Texas Instruments ADS7871 A/D converter"
+ depends on SPI
+ help
+ If you say yes here you get support for TI ADS7871 & ADS7870
+
+ This driver can also be built as a module. If so, the module
+ will be called ads7871.
+
+config SENSORS_AMC6821
+ tristate "Texas Instruments AMC6821"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Texas Instruments
+ AMC6821 hardware monitoring chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called amc6821.
+
+config SENSORS_THMC50
+ tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments THMC50
+ sensor chips and clones: the Analog Devices ADM1022.
+
+ This driver can also be built as a module. If so, the module
+ will be called thmc50.
+
+config SENSORS_TMP102
+ tristate "Texas Instruments TMP102"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP102
+ sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp102.
+
+config SENSORS_TMP401
+ tristate "Texas Instruments TMP401 and compatibles"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP401 and
+ TMP411 temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp401.
+
+config SENSORS_TMP421
+ tristate "Texas Instruments TMP421 and compatible"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Texas Instruments TMP421,
+ TMP422 and TMP423 temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tmp421.
+
+config SENSORS_TWL4030_MADC
+ tristate "Texas Instruments TWL4030 MADC Hwmon"
+ depends on TWL4030_MADC
+ help
+ If you say yes here you get hwmon support for triton
+ TWL4030-MADC.
+
+ This driver can also be built as a module. If so it will be called
+ twl4030-madc-hwmon.
+
+config SENSORS_VIA_CPUTEMP
+ tristate "VIA CPU temperature sensor"
+ depends on X86
+ select HWMON_VID
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Supported are all known variants of
+ the VIA C7 and Nano.
+
+config SENSORS_VIA686A
+ tristate "VIA686A"
+ depends on PCI
+ help
+ If you say yes here you get support for the integrated sensors in
+ Via 686A/B South Bridges.
+
+ This driver can also be built as a module. If so, the module
+ will be called via686a.
+
+config SENSORS_VT1211
+ tristate "VIA VT1211"
+ depends on !PPC
+ select HWMON_VID
+ help
+ If you say yes here then you get support for hardware monitoring
+ features of the VIA VT1211 Super-I/O chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called vt1211.
+
+config SENSORS_VT8231
+ tristate "VIA VT8231"
+ depends on PCI
+ select HWMON_VID
+ help
+ If you say yes here then you get support for the integrated sensors
+ in the VIA VT8231 device.
+
+ This driver can also be built as a module. If so, the module
+ will be called vt8231.
+
+config SENSORS_W83781D
+ tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Winbond W8378x series
+ of sensor chips: the W83781D, W83782D and W83783S, and the similar
+ Asus AS99127F.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83781d.
+
+config SENSORS_W83791D
+ tristate "Winbond W83791D"
+ depends on I2C
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Winbond W83791D chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83791d.
+
+config SENSORS_W83792D
+ tristate "Winbond W83792D"
+ depends on I2C
+ help
+ If you say yes here you get support for the Winbond W83792D chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83792d.
+
+config SENSORS_W83793
+ tristate "Winbond W83793"
+ depends on I2C && EXPERIMENTAL
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Winbond W83793
+ hardware monitoring chip, including support for the integrated
+ watchdog.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83793.
+
+config SENSORS_W83795
+ tristate "Winbond/Nuvoton W83795G/ADG"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83795G and
+ W83795ADG hardware monitoring chip, including manual fan speed
+ control.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83795.
+
+config SENSORS_W83795_FANCTRL
+ boolean "Include automatic fan control support (DANGEROUS)"
+ depends on SENSORS_W83795 && EXPERIMENTAL
+ default n
+ help
+ If you say yes here, support for automatic fan speed control
+ will be included in the driver.
+
+ This part of the code wasn't carefully reviewed and tested yet,
+ so enabling this option is strongly discouraged on production
+ servers. Only developers and testers should enable it for the
+ time being.
+
+ Please also note that this option will create sysfs attribute
+ files which may change in the future, so you shouldn't rely
+ on them being stable.
+
+config SENSORS_W83L785TS
+ tristate "Winbond W83L785TS-S"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83L785TS-S
+ sensor chip, which is used on the Asus A7N8X, among other
+ motherboards.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83l785ts.
+
+config SENSORS_W83L786NG
+ tristate "Winbond W83L786NG, W83L786NR"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83L786NG
+ and W83L786NR sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83l786ng.
+
+config SENSORS_W83627HF
+ tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ depends on !PPC
+ select HWMON_VID
+ help
+ If you say yes here you get support for the Winbond W836X7 series
+ of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
+ W83697HF.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83627hf.
+
+config SENSORS_W83627EHF
+ tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
+ depends on !PPC
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Winbond W83627EHF Super-I/O chip.
+
+ This driver also supports the W83627EHG, which is the lead-free
+ version of the W83627EHF, and the W83627DHG, which is a similar
+ chip suited for specific Intel processors that use PECI such as
+ the Core 2 Duo. And also the W83627UHG, which is a stripped down
+ version of the W83627DHG (as far as hardware monitoring goes.)
+
+ This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
+ (also known as W83667HG-I), and NCT6776F.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83627ehf.
+
+config SENSORS_WM831X
+ tristate "WM831x PMICs"
+ depends on MFD_WM831X
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Wolfson Microelectronics
+ WM831x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm831x-hwmon.
+
+config SENSORS_WM8350
+ tristate "Wolfson Microelectronics WM835x"
+ depends on MFD_WM8350
+ help
+ If you say yes here you get support for the hardware
+ monitoring features of the WM835x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm8350-hwmon.
+
+config SENSORS_ULTRA45
+ tristate "Sun Ultra45 PIC16F747"
+ depends on SPARC64
+ help
+ This driver provides support for the Ultra45 workstation environmental
+ sensors.
+
+config SENSORS_APPLESMC
+ tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
+ depends on INPUT && X86
+ select NEW_LEDS
+ select LEDS_CLASS
+ select INPUT_POLLDEV
+ default n
+ help
+ This driver provides support for the Apple System Management
+ Controller, which provides an accelerometer (Apple Sudden Motion
+ Sensor), light sensors, temperature sensors, keyboard backlight
+ control and fan control.
+
+ Only Intel-based Apple's computers are supported (MacBook Pro,
+ MacBook, MacMini).
+
+ Data from the different sensors, keyboard backlight control and fan
+ control are accessible via sysfs.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of applesmc.
+
+config SENSORS_MC13783_ADC
+ tristate "Freescale MC13783/MC13892 ADC"
+ depends on MFD_MC13XXX
+ help
+ Support for the A/D converter on MC13783 and MC13892 PMIC.
+
+if ACPI
+
+comment "ACPI drivers"
+
+config SENSORS_ACPI_POWER
+ tristate "ACPI 4.0 power meter"
+ help
+ This driver exposes ACPI 4.0 power meters as hardware monitoring
+ devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
+ and a power meter.
+
+ To compile this driver as a module, choose M here:
+ the module will be called acpi_power_meter.
+
+config SENSORS_ATK0110
+ tristate "ASUS ATK0110"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the ACPI hardware
+ monitoring interface found in many ASUS motherboards. This
+ driver will provide readings of fans, voltages and temperatures
+ through the system firmware.
+
+ This driver can also be built as a module. If so, the module
+ will be called asus_atk0110.
+
+endif # ACPI
+
+endif # HWMON