zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/i2c/busses/i2c-i801.c b/ap/os/linux/linux-3.4.x/drivers/i2c/busses/i2c-i801.c
new file mode 100644
index 0000000..d63e130
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/i2c/busses/i2c-i801.c
@@ -0,0 +1,955 @@
+/*
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
+ <mdsxyz123@yahoo.com>
+ Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2010 Intel Corporation,
+ David Woodhouse <dwmw2@infradead.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ Supports the following Intel I/O Controller Hubs (ICH):
+
+ I/O Block I2C
+ region SMBus Block proc. block
+ Chip name PCI ID size PEC buffer call read
+ ----------------------------------------------------------------------
+ 82801AA (ICH) 0x2413 16 no no no no
+ 82801AB (ICH0) 0x2423 16 no no no no
+ 82801BA (ICH2) 0x2443 16 no no no no
+ 82801CA (ICH3) 0x2483 32 soft no no no
+ 82801DB (ICH4) 0x24c3 32 hard yes no no
+ 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ 6300ESB 0x25a4 32 hard yes yes yes
+ 82801F (ICH6) 0x266a 32 hard yes yes yes
+ 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ 82801G (ICH7) 0x27da 32 hard yes yes yes
+ 82801H (ICH8) 0x283e 32 hard yes yes yes
+ 82801I (ICH9) 0x2930 32 hard yes yes yes
+ EP80579 (Tolapai) 0x5032 32 hard yes yes yes
+ ICH10 0x3a30 32 hard yes yes yes
+ ICH10 0x3a60 32 hard yes yes yes
+ 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
+ 6 Series (PCH) 0x1c22 32 hard yes yes yes
+ Patsburg (PCH) 0x1d22 32 hard yes yes yes
+ Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
+ Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
+ Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ Panther Point (PCH) 0x1e22 32 hard yes yes yes
+ Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
+ Avoton (SOC) 0x1f3c 32 hard yes yes yes
+
+ Features supported by this driver:
+ Software PEC no
+ Hardware PEC yes
+ Block buffer yes
+ Block process call transaction no
+ I2C block read transaction yes (doesn't use the block buffer)
+ Slave mode no
+
+ See the file Documentation/i2c/busses/i2c-i801 for details.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+
+/* I801 SMBus address offsets */
+#define SMBHSTSTS(p) (0 + (p)->smba)
+#define SMBHSTCNT(p) (2 + (p)->smba)
+#define SMBHSTCMD(p) (3 + (p)->smba)
+#define SMBHSTADD(p) (4 + (p)->smba)
+#define SMBHSTDAT0(p) (5 + (p)->smba)
+#define SMBHSTDAT1(p) (6 + (p)->smba)
+#define SMBBLKDAT(p) (7 + (p)->smba)
+#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
+#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
+#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
+
+/* PCI Address Constants */
+#define SMBBAR 4
+#define SMBHSTCFG 0x040
+
+/* Host configuration bits for SMBHSTCFG */
+#define SMBHSTCFG_HST_EN 1
+#define SMBHSTCFG_SMB_SMI_EN 2
+#define SMBHSTCFG_I2C_EN 4
+
+/* Auxiliary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC 1
+#define SMBAUXCTL_E32B 2
+
+/* kill bit for SMBHSTCNT */
+#define SMBHSTCNT_KILL 2
+
+/* Other settings */
+#define MAX_RETRIES 400
+#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
+
+/* I801 command constants */
+#define I801_QUICK 0x00
+#define I801_BYTE 0x04
+#define I801_BYTE_DATA 0x08
+#define I801_WORD_DATA 0x0C
+#define I801_PROC_CALL 0x10 /* unimplemented */
+#define I801_BLOCK_DATA 0x14
+#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
+#define I801_BLOCK_LAST 0x34
+#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */
+#define I801_START 0x40
+#define I801_PEC_EN 0x80 /* ICH3 and later */
+
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE 0x80
+#define SMBHSTSTS_INUSE_STS 0x40
+#define SMBHSTSTS_SMBALERT_STS 0x20
+#define SMBHSTSTS_FAILED 0x10
+#define SMBHSTSTS_BUS_ERR 0x08
+#define SMBHSTSTS_DEV_ERR 0x04
+#define SMBHSTSTS_INTR 0x02
+#define SMBHSTSTS_HOST_BUSY 0x01
+
+#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
+ SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
+ SMBHSTSTS_INTR)
+
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
+
+struct i801_priv {
+ struct i2c_adapter adapter;
+ unsigned long smba;
+ unsigned char original_hstcfg;
+ struct pci_dev *pci_dev;
+ unsigned int features;
+};
+
+static struct pci_driver i801_driver;
+
+#define FEATURE_SMBUS_PEC (1 << 0)
+#define FEATURE_BLOCK_BUFFER (1 << 1)
+#define FEATURE_BLOCK_PROC (1 << 2)
+#define FEATURE_I2C_BLOCK_READ (1 << 3)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF (1 << 15)
+
+static const char *i801_feature_names[] = {
+ "SMBus PEC",
+ "Block buffer",
+ "Block process call",
+ "I2C block read",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+
+/* Make sure the SMBus host is ready to start transmitting.
+ Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(struct i801_priv *priv)
+{
+ int status;
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & SMBHSTSTS_HOST_BUSY) {
+ dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
+ return -EBUSY;
+ }
+
+ status &= STATUS_FLAGS;
+ if (status) {
+ dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
+ status);
+ outb_p(status, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ if (status) {
+ dev_err(&priv->pci_dev->dev,
+ "Failed clearing status flags (%02x)\n",
+ status);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/* Convert the status register to an error code, and clear it. */
+static int i801_check_post(struct i801_priv *priv, int status, int timeout)
+{
+ int result = 0;
+
+ /* If the SMBus is still busy, we give up */
+ if (timeout) {
+ dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
+ /* try to stop the current command */
+ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+ outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
+ SMBHSTCNT(priv));
+ usleep_range(1000, 2000);
+ outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
+ SMBHSTCNT(priv));
+
+ /* Check if it worked */
+ status = inb_p(SMBHSTSTS(priv));
+ if ((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & SMBHSTSTS_FAILED))
+ dev_err(&priv->pci_dev->dev,
+ "Failed terminating the transaction\n");
+ outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
+ return -ETIMEDOUT;
+ }
+
+ if (status & SMBHSTSTS_FAILED) {
+ result = -EIO;
+ dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+ }
+ if (status & SMBHSTSTS_DEV_ERR) {
+ result = -ENXIO;
+ dev_dbg(&priv->pci_dev->dev, "No response\n");
+ }
+ if (status & SMBHSTSTS_BUS_ERR) {
+ result = -EAGAIN;
+ dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+ }
+
+ if (result) {
+ /* Clear error flags */
+ outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
+ status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+ if (status) {
+ dev_warn(&priv->pci_dev->dev, "Failed clearing status "
+ "flags at end of transaction (%02x)\n",
+ status);
+ }
+ }
+
+ return result;
+}
+
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+ int status;
+ int result;
+ int timeout = 0;
+
+ result = i801_check_pre(priv);
+ if (result < 0)
+ return result;
+
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * INTREN, SMBSCMD are passed in xact */
+ outb_p(xact | I801_START, SMBHSTCNT(priv));
+
+ /* We will always wait for a fraction of a second! */
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
+
+ result = i801_check_post(priv, status, timeout > MAX_RETRIES);
+ if (result < 0)
+ return result;
+
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ return 0;
+}
+
+/* wait for INTR bit as advised by Intel */
+static void i801_wait_hwpec(struct i801_priv *priv)
+{
+ int timeout = 0;
+ int status;
+
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while ((!(status & SMBHSTSTS_INTR))
+ && (timeout++ < MAX_RETRIES));
+
+ if (timeout > MAX_RETRIES)
+ dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n");
+
+ outb_p(status, SMBHSTSTS(priv));
+}
+
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int hwpec)
+{
+ int i, len;
+ int status;
+
+ inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+ /* Use 32-byte buffer to process this transaction */
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0(priv));
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+ }
+
+ status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 |
+ I801_PEC_EN * hwpec);
+ if (status)
+ return status;
+
+ if (read_write == I2C_SMBUS_READ) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++)
+ data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+ }
+ return 0;
+}
+
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int command,
+ int hwpec)
+{
+ int i, len;
+ int smbcmd;
+ int status;
+ int result;
+ int timeout;
+
+ result = i801_check_pre(priv);
+ if (result < 0)
+ return result;
+
+ len = data->block[0];
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(len, SMBHSTDAT0(priv));
+ outb_p(data->block[1], SMBBLKDAT(priv));
+ }
+
+ for (i = 1; i <= len; i++) {
+ if (i == len && read_write == I2C_SMBUS_READ) {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA)
+ smbcmd = I801_I2C_BLOCK_LAST;
+ else
+ smbcmd = I801_BLOCK_LAST;
+ } else {
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_READ)
+ smbcmd = I801_I2C_BLOCK_DATA;
+ else
+ smbcmd = I801_BLOCK_DATA;
+ }
+ outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
+
+ if (i == 1)
+ outb_p(inb(SMBHSTCNT(priv)) | I801_START,
+ SMBHSTCNT(priv));
+
+ /* We will always wait for a fraction of a second! */
+ timeout = 0;
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ } while ((!(status & SMBHSTSTS_BYTE_DONE))
+ && (timeout++ < MAX_RETRIES));
+
+ result = i801_check_post(priv, status, timeout > MAX_RETRIES);
+ if (result < 0)
+ return result;
+
+ if (i == 1 && read_write == I2C_SMBUS_READ
+ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ len);
+ /* Recover */
+ while (inb_p(SMBHSTSTS(priv)) &
+ SMBHSTSTS_HOST_BUSY)
+ outb_p(SMBHSTSTS_BYTE_DONE,
+ SMBHSTSTS(priv));
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ return -EPROTO;
+ }
+ data->block[0] = len;
+ }
+
+ /* Retrieve/store value in SMBBLKDAT */
+ if (read_write == I2C_SMBUS_READ)
+ data->block[i] = inb_p(SMBBLKDAT(priv));
+ if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+
+ /* signals SMBBLKDAT ready */
+ outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ }
+
+ return 0;
+}
+
+static int i801_set_block_buffer_mode(struct i801_priv *priv)
+{
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+ if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
+ return -EIO;
+ return 0;
+}
+
+/* Block transaction function */
+static int i801_block_transaction(struct i801_priv *priv,
+ union i2c_smbus_data *data, char read_write,
+ int command, int hwpec)
+{
+ int result = 0;
+ unsigned char hostc;
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+ dev_err(&priv->pci_dev->dev,
+ "I2C block read is unsupported!\n");
+ return -EOPNOTSUPP;
+ }
+ }
+
+ if (read_write == I2C_SMBUS_WRITE
+ || command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (data->block[0] < 1)
+ data->block[0] = 1;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ data->block[0] = 32; /* max for SMBus block reads */
+ }
+
+ /* Experience has shown that the block buffer can only be used for
+ SMBus (not I2C) block transactions, even though the datasheet
+ doesn't mention this limitation. */
+ if ((priv->features & FEATURE_BLOCK_BUFFER)
+ && command != I2C_SMBUS_I2C_BLOCK_DATA
+ && i801_set_block_buffer_mode(priv) == 0)
+ result = i801_block_transaction_by_block(priv, data,
+ read_write, hwpec);
+ else
+ result = i801_block_transaction_byte_by_byte(priv, data,
+ read_write,
+ command, hwpec);
+
+ if (result == 0 && hwpec)
+ i801_wait_hwpec(priv);
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_WRITE) {
+ /* restore saved configuration register value */
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
+ }
+ return result;
+}
+
+/* Return negative errno on error. */
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ int hwpec;
+ int block = 0;
+ int ret, xact = 0;
+ struct i801_priv *priv = i2c_get_adapdata(adap);
+
+ hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+ && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ xact = I801_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(command, SMBHSTCMD(priv));
+ xact = I801_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(data->byte, SMBHSTDAT0(priv));
+ xact = I801_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+ }
+ xact = I801_WORD_DATA;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /* NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading */
+ outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading */
+ outb_p(command, SMBHSTDAT1(priv));
+ } else
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ default:
+ dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+ size);
+ return -EOPNOTSUPP;
+ }
+
+ if (hwpec) /* enable/disable hardware PEC */
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+ else
+ outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+ SMBAUXCTL(priv));
+
+ if (block)
+ ret = i801_block_transaction(priv, data, read_write, size,
+ hwpec);
+ else
+ ret = i801_transaction(priv, xact | ENABLE_INT9);
+
+ /* Some BIOSes don't like it when PEC is enabled at reboot or resume
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
+ if (hwpec || block)
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+ if (block)
+ return ret;
+ if (ret)
+ return ret;
+ if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
+ return 0;
+
+ switch (xact & 0x7f) {
+ case I801_BYTE: /* Result put in SMBHSTDAT0 */
+ case I801_BYTE_DATA:
+ data->byte = inb_p(SMBHSTDAT0(priv));
+ break;
+ case I801_WORD_DATA:
+ data->word = inb_p(SMBHSTDAT0(priv)) +
+ (inb_p(SMBHSTDAT1(priv)) << 8);
+ break;
+ }
+ return 0;
+}
+
+
+static u32 i801_func(struct i2c_adapter *adapter)
+{
+ struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+ ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = i801_access,
+ .functionality = i801_func,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, i801_ids);
+
+#if defined CONFIG_X86 && defined CONFIG_DMI
+static unsigned char apanel_addr;
+
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
+{
+ ssize_t offset;
+ const unsigned char signature[] = "FJKEYINF";
+
+ for (offset = 0; offset < 0x10000; offset += 0x10) {
+ if (check_signature(bios + offset, signature,
+ sizeof(signature)-1))
+ return bios + offset;
+ }
+ return NULL;
+}
+
+static void __init input_apanel_init(void)
+{
+ void __iomem *bios;
+ const void __iomem *p;
+
+ bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+ p = bios_signature(bios);
+ if (p) {
+ /* just use the first address */
+ apanel_addr = readb(p + 8 + 3) >> 1;
+ }
+ iounmap(bios);
+}
+
+struct dmi_onboard_device_info {
+ const char *name;
+ u8 type;
+ unsigned short i2c_addr;
+ const char *i2c_type;
+};
+
+static struct dmi_onboard_device_info __devinitdata dmi_devices[] = {
+ { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+ { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+ { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void __devinit dmi_check_onboard_device(u8 type, const char *name,
+ struct i2c_adapter *adap)
+{
+ int i;
+ struct i2c_board_info info;
+
+ for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+ /* & ~0x80, ignore enabled/disabled bit */
+ if ((type & ~0x80) != dmi_devices[i].type)
+ continue;
+ if (strcasecmp(name, dmi_devices[i].name))
+ continue;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = dmi_devices[i].i2c_addr;
+ strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+ i2c_new_device(adap, &info);
+ break;
+ }
+}
+
+/* We use our own function to check for onboard devices instead of
+ dmi_find_device() as some buggy BIOS's have the devices we are interested
+ in marked as disabled */
+static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
+ void *adap)
+{
+ int i, count;
+
+ if (dm->type != 10)
+ return;
+
+ count = (dm->length - sizeof(struct dmi_header)) / 2;
+ for (i = 0; i < count; i++) {
+ const u8 *d = (char *)(dm + 1) + (i * 2);
+ const char *name = ((char *) dm) + dm->length;
+ u8 type = d[0];
+ u8 s = d[1];
+
+ if (!s)
+ continue;
+ s--;
+ while (s > 0 && name[0]) {
+ name += strlen(name) + 1;
+ s--;
+ }
+ if (name[0] == 0) /* Bogus string reference */
+ continue;
+
+ dmi_check_onboard_device(type, name, adap);
+ }
+}
+
+/* Register optional slaves */
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv)
+{
+ /* Only register slaves on main SMBus channel */
+ if (priv->features & FEATURE_IDF)
+ return;
+
+ if (apanel_addr) {
+ struct i2c_board_info info;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = apanel_addr;
+ strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+ i2c_new_device(&priv->adapter, &info);
+ }
+
+ if (dmi_name_in_vendors("FUJITSU"))
+ dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif /* CONFIG_X86 && CONFIG_DMI */
+
+static int __devinit i801_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ unsigned char temp;
+ int err, i;
+ struct i801_priv *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ i2c_set_adapdata(&priv->adapter, priv);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ priv->adapter.algo = &smbus_algorithm;
+
+ priv->pci_dev = dev;
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+ case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+ priv->features |= FEATURE_IDF;
+ /* fall through */
+ default:
+ priv->features |= FEATURE_I2C_BLOCK_READ;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
+ priv->features |= FEATURE_SMBUS_PEC;
+ priv->features |= FEATURE_BLOCK_BUFFER;
+ /* fall through */
+ case PCI_DEVICE_ID_INTEL_82801CA_3:
+ case PCI_DEVICE_ID_INTEL_82801BA_2:
+ case PCI_DEVICE_ID_INTEL_82801AB_3:
+ case PCI_DEVICE_ID_INTEL_82801AA_3:
+ break;
+ }
+
+ /* Disable features on user request */
+ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+ if (priv->features & disable_features & (1 << i))
+ dev_notice(&dev->dev, "%s disabled by user\n",
+ i801_feature_names[i]);
+ }
+ priv->features &= ~disable_features;
+
+ err = pci_enable_device(dev);
+ if (err) {
+ dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+ err);
+ goto exit;
+ }
+
+ /* Determine the address of the SMBus area */
+ priv->smba = pci_resource_start(dev, SMBBAR);
+ if (!priv->smba) {
+ dev_err(&dev->dev, "SMBus base address uninitialized, "
+ "upgrade BIOS\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+ if (err) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ err = pci_request_region(dev, SMBBAR, i801_driver.name);
+ if (err) {
+ dev_err(&dev->dev, "Failed to request SMBus region "
+ "0x%lx-0x%Lx\n", priv->smba,
+ (unsigned long long)pci_resource_end(dev, SMBBAR));
+ goto exit;
+ }
+
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
+ priv->original_hstcfg = temp;
+ temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
+ if (!(temp & SMBHSTCFG_HST_EN)) {
+ dev_info(&dev->dev, "Enabling SMBus device\n");
+ temp |= SMBHSTCFG_HST_EN;
+ }
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
+
+ if (temp & SMBHSTCFG_SMB_SMI_EN)
+ dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+ else
+ dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
+
+ /* Clear special mode bits */
+ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+ /* set up the sysfs linkage to our parent device */
+ priv->adapter.dev.parent = &dev->dev;
+
+ /* Retry up to 3 times on lost arbitration */
+ priv->adapter.retries = 3;
+
+ snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+ "SMBus I801 adapter at %04lx", priv->smba);
+ err = i2c_add_adapter(&priv->adapter);
+ if (err) {
+ dev_err(&dev->dev, "Failed to add SMBus adapter\n");
+ goto exit_release;
+ }
+
+ i801_probe_optional_slaves(priv);
+
+ pci_set_drvdata(dev, priv);
+ return 0;
+
+exit_release:
+ pci_release_region(dev, SMBBAR);
+exit:
+ kfree(priv);
+ return err;
+}
+
+static void __devexit i801_remove(struct pci_dev *dev)
+{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ i2c_del_adapter(&priv->adapter);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+ pci_release_region(dev, SMBBAR);
+ pci_set_drvdata(dev, NULL);
+ kfree(priv);
+ /*
+ * do not call pci_disable_device(dev) since it can cause hard hangs on
+ * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
+ */
+}
+
+#ifdef CONFIG_PM
+static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
+{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ pci_save_state(dev);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+ pci_set_power_state(dev, pci_choose_state(dev, mesg));
+ return 0;
+}
+
+static int i801_resume(struct pci_dev *dev)
+{
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+ return pci_enable_device(dev);
+}
+#else
+#define i801_suspend NULL
+#define i801_resume NULL
+#endif
+
+static struct pci_driver i801_driver = {
+ .name = "i801_smbus",
+ .id_table = i801_ids,
+ .probe = i801_probe,
+ .remove = __devexit_p(i801_remove),
+ .suspend = i801_suspend,
+ .resume = i801_resume,
+};
+
+static int __init i2c_i801_init(void)
+{
+ if (dmi_name_in_vendors("FUJITSU"))
+ input_apanel_init();
+ return pci_register_driver(&i801_driver);
+}
+
+static void __exit i2c_i801_exit(void)
+{
+ pci_unregister_driver(&i801_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, "
+ "Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i801_init);
+module_exit(i2c_i801_exit);