zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/ide/scc_pata.c b/ap/os/linux/linux-3.4.x/drivers/ide/scc_pata.c
new file mode 100644
index 0000000..b7f5b0c
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/ide/scc_pata.c
@@ -0,0 +1,889 @@
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ide/pci/siimage.c:
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003 Red Hat
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
+
+#define SCC_PATA_NAME "scc IDE"
+
+#define TDVHSEL_MASTER 0x00000001
+#define TDVHSEL_SLAVE 0x00000004
+
+#define MODE_JCUSFEN 0x00000080
+
+#define CCKCTRL_ATARESET 0x00040000
+#define CCKCTRL_BUFCNT 0x00020000
+#define CCKCTRL_CRST 0x00010000
+#define CCKCTRL_OCLKEN 0x00000100
+#define CCKCTRL_ATACLKOEN 0x00000002
+#define CCKCTRL_LCLKEN 0x00000001
+
+#define QCHCD_IOS_SS 0x00000001
+
+#define QCHSD_STPDIAG 0x00020000
+
+#define INTMASK_MSK 0xD1000012
+#define INTSTS_SERROR 0x80000000
+#define INTSTS_PRERR 0x40000000
+#define INTSTS_RERR 0x10000000
+#define INTSTS_ICERR 0x01000000
+#define INTSTS_BMSINT 0x00000010
+#define INTSTS_BMHE 0x00000008
+#define INTSTS_IOIRQS 0x00000004
+#define INTSTS_INTRQ 0x00000002
+#define INTSTS_ACTEINT 0x00000001
+
+#define ECMODE_VALUE 0x01
+
+static struct scc_ports {
+ unsigned long ctl, dma;
+ struct ide_host *host; /* for removing port from system */
+} scc_ports[MAX_HWIFS];
+
+/* PIO transfer mode table */
+/* JCHST */
+static unsigned long JCHSTtbl[2][7] = {
+ {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHHT */
+static unsigned long JCHHTtbl[2][7] = {
+ {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHCT */
+static unsigned long JCHCTtbl[2][7] = {
+ {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
+ {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
+};
+
+
+/* DMA transfer mode table */
+/* JCHDCTM/JCHDCTS */
+static unsigned long JCHDCTxtbl[2][7] = {
+ {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
+ {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS */
+static unsigned long JCSTWTxtbl[2][7] = {
+ {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
+ {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCTSS */
+static unsigned long JCTSStbl[2][7] = {
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
+};
+
+/* JCENVT */
+static unsigned long JCENVTtbl[2][7] = {
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static unsigned long JCACTSELtbl[2][7] = {
+ {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
+};
+
+
+static u8 scc_ide_inb(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return (u8)data;
+}
+
+static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
+{
+ out_be32((void *)hwif->io_ports.command_addr, cmd);
+ eieio();
+ in_be32((void *)(hwif->dma_base + 0x01c));
+ eieio();
+}
+
+static u8 scc_read_status(ide_hwif_t *hwif)
+{
+ return (u8)in_be32((void *)hwif->io_ports.status_addr);
+}
+
+static u8 scc_read_altstatus(ide_hwif_t *hwif)
+{
+ return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
+}
+
+static u8 scc_dma_sff_read_status(ide_hwif_t *hwif)
+{
+ return (u8)in_be32((void *)(hwif->dma_base + 4));
+}
+
+static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl)
+{
+ out_be32((void *)hwif->io_ports.ctl_addr, ctl);
+ eieio();
+ in_be32((void *)(hwif->dma_base + 0x01c));
+ eieio();
+}
+
+static void scc_ide_insw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_insl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_outb(u8 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void
+scc_ide_outsw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+static void
+scc_ide_outsl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+/**
+ * scc_set_pio_mode - set host controller for PIO mode
+ * @hwif: port
+ * @drive: drive
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long piosht_port = ctl_base + 0x000;
+ unsigned long pioct_port = ctl_base + 0x004;
+ unsigned long reg;
+ int offset;
+ const u8 pio = drive->pio_mode - XFER_PIO_0;
+
+ reg = in_be32((void __iomem *)cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+ reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
+ out_be32((void __iomem *)piosht_port, reg);
+ reg = JCHCTtbl[offset][pio];
+ out_be32((void __iomem *)pioct_port, reg);
+}
+
+/**
+ * scc_set_dma_mode - set host controller for DMA mode
+ * @hwif: port
+ * @drive: drive
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long mdmact_port = ctl_base + 0x008;
+ unsigned long mcrcst_port = ctl_base + 0x00c;
+ unsigned long sdmact_port = ctl_base + 0x010;
+ unsigned long scrcst_port = ctl_base + 0x014;
+ unsigned long udenvt_port = ctl_base + 0x018;
+ unsigned long tdvhsel_port = ctl_base + 0x020;
+ int is_slave = drive->dn & 1;
+ int offset, idx;
+ unsigned long reg;
+ unsigned long jcactsel;
+ const u8 speed = drive->dma_mode;
+
+ reg = in_be32((void __iomem *)cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+
+ idx = speed - XFER_UDMA_0;
+
+ jcactsel = JCACTSELtbl[offset][idx];
+ if (is_slave) {
+ out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
+ jcactsel = jcactsel << 2;
+ out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
+ } else {
+ out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
+ out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
+ }
+ reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
+ out_be32((void __iomem *)udenvt_port, reg);
+}
+
+static void scc_dma_host_set(ide_drive_t *drive, int on)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 unit = drive->dn & 1;
+ u8 dma_stat = scc_dma_sff_read_status(hwif);
+
+ if (on)
+ dma_stat |= (1 << (5 + unit));
+ else
+ dma_stat &= ~(1 << (5 + unit));
+
+ scc_ide_outb(dma_stat, hwif->dma_base + 4);
+}
+
+/**
+ * scc_dma_setup - begin a DMA phase
+ * @drive: target device
+ * @cmd: command
+ *
+ * Build an IDE DMA PRD (IDE speak for scatter gather table)
+ * and then set up the DMA transfer registers.
+ *
+ * Returns 0 on success. If a PIO fallback is required then 1
+ * is returned.
+ */
+
+static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
+ u8 dma_stat;
+
+ /* fall back to pio! */
+ if (ide_build_dmatable(drive, cmd) == 0)
+ return 1;
+
+ /* PRD table */
+ out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
+
+ /* specify r/w */
+ out_be32((void __iomem *)hwif->dma_base, rw);
+
+ /* read DMA status for INTR & ERROR flags */
+ dma_stat = scc_dma_sff_read_status(hwif);
+
+ /* clear INTR & ERROR flags */
+ out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
+
+ return 0;
+}
+
+static void scc_dma_start(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_cmd = scc_ide_inb(hwif->dma_base);
+
+ /* start DMA */
+ scc_ide_outb(dma_cmd | 1, hwif->dma_base);
+}
+
+static int __scc_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_stat, dma_cmd;
+
+ /* get DMA command mode */
+ dma_cmd = scc_ide_inb(hwif->dma_base);
+ /* stop DMA */
+ scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
+ /* get DMA status */
+ dma_stat = scc_dma_sff_read_status(hwif);
+ /* clear the INTR & ERROR bits */
+ scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
+ /* verify good DMA status */
+ return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+}
+
+/**
+ * scc_dma_end - Stop DMA
+ * @drive: IDE drive
+ *
+ * Check and clear INT Status register.
+ * Then call __scc_dma_end().
+ */
+
+static int scc_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ void __iomem *dma_base = (void __iomem *)hwif->dma_base;
+ unsigned long intsts_port = hwif->dma_base + 0x014;
+ u32 reg;
+ int dma_stat, data_loss = 0;
+ static int retry = 0;
+
+ /* errata A308 workaround: Step5 (check data loss) */
+ /* We don't check non ide_disk because it is limited to UDMA4 */
+ if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
+ & ATA_ERR) &&
+ drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
+ reg = in_be32((void __iomem *)intsts_port);
+ if (!(reg & INTSTS_ACTEINT)) {
+ printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
+ drive->name);
+ data_loss = 1;
+ if (retry++) {
+ struct request *rq = hwif->rq;
+ ide_drive_t *drive;
+ int i;
+
+ /* ERROR_RESET and drive->crc_count are needed
+ * to reduce DMA transfer mode in retry process.
+ */
+ if (rq)
+ rq->errors |= ERROR_RESET;
+
+ ide_port_for_each_dev(i, drive, hwif)
+ drive->crc_count++;
+ }
+ }
+ }
+
+ while (1) {
+ reg = in_be32((void __iomem *)intsts_port);
+
+ if (reg & INTSTS_SERROR) {
+ printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
+
+ out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_PRERR) {
+ u32 maea0, maec0;
+ unsigned long ctl_base = hwif->config_data;
+
+ maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
+ maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
+
+ printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
+
+ out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
+
+ out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_RERR) {
+ printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
+
+ out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_ICERR) {
+ out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
+
+ printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
+ continue;
+ }
+
+ if (reg & INTSTS_BMSINT) {
+ printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
+
+ ide_do_reset(drive);
+ continue;
+ }
+
+ if (reg & INTSTS_BMHE) {
+ out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
+ continue;
+ }
+
+ if (reg & INTSTS_ACTEINT) {
+ out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
+ continue;
+ }
+
+ if (reg & INTSTS_IOIRQS) {
+ out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
+ continue;
+ }
+ break;
+ }
+
+ dma_stat = __scc_dma_end(drive);
+ if (data_loss)
+ dma_stat |= 2; /* emulate DMA error (to retry command) */
+ return dma_stat;
+}
+
+/* returns 1 if dma irq issued, 0 otherwise */
+static int scc_dma_test_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
+
+ /* SCC errata A252,A308 workaround: Step4 */
+ if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
+ & ATA_ERR) &&
+ (int_stat & INTSTS_INTRQ))
+ return 1;
+
+ /* SCC errata A308 workaround: Step5 (polling IOIRQS) */
+ if (int_stat & INTSTS_IOIRQS)
+ return 1;
+
+ return 0;
+}
+
+static u8 scc_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 mask = hwif->ultra_mask;
+
+ /* errata A308 workaround: limit non ide_disk drive to UDMA4 */
+ if ((drive->media != ide_disk) && (mask & 0xE0)) {
+ printk(KERN_INFO "%s: limit %s to UDMA4\n",
+ SCC_PATA_NAME, drive->name);
+ mask = ATA_UDMA4;
+ }
+
+ return mask;
+}
+
+/**
+ * setup_mmio_scc - map CTRL/BMID region
+ * @dev: PCI device we are configuring
+ * @name: device name
+ *
+ */
+
+static int setup_mmio_scc (struct pci_dev *dev, const char *name)
+{
+ void __iomem *ctl_addr;
+ void __iomem *dma_addr;
+ int i, ret;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ if (scc_ports[i].ctl == 0)
+ break;
+ }
+ if (i >= MAX_HWIFS)
+ return -ENOMEM;
+
+ ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: can't reserve resources\n", name);
+ return ret;
+ }
+
+ ctl_addr = pci_ioremap_bar(dev, 0);
+ if (!ctl_addr)
+ goto fail_0;
+
+ dma_addr = pci_ioremap_bar(dev, 1);
+ if (!dma_addr)
+ goto fail_1;
+
+ pci_set_master(dev);
+ scc_ports[i].ctl = (unsigned long)ctl_addr;
+ scc_ports[i].dma = (unsigned long)dma_addr;
+ pci_set_drvdata(dev, (void *) &scc_ports[i]);
+
+ return 1;
+
+ fail_1:
+ iounmap(ctl_addr);
+ fail_0:
+ return -ENOMEM;
+}
+
+static int scc_ide_setup_pci_device(struct pci_dev *dev,
+ const struct ide_port_info *d)
+{
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ struct ide_host *host;
+ struct ide_hw hw, *hws[] = { &hw };
+ int i, rc;
+
+ memset(&hw, 0, sizeof(hw));
+ for (i = 0; i <= 8; i++)
+ hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
+ hw.irq = dev->irq;
+ hw.dev = &dev->dev;
+
+ rc = ide_host_add(d, hws, 1, &host);
+ if (rc)
+ return rc;
+
+ ports->host = host;
+
+ return 0;
+}
+
+/**
+ * init_setup_scc - set up an SCC PATA Controller
+ * @dev: PCI device
+ * @d: IDE port info
+ *
+ * Perform the initial set up for this device.
+ */
+
+static int __devinit init_setup_scc(struct pci_dev *dev,
+ const struct ide_port_info *d)
+{
+ unsigned long ctl_base;
+ unsigned long dma_base;
+ unsigned long cckctrl_port;
+ unsigned long intmask_port;
+ unsigned long mode_port;
+ unsigned long ecmode_port;
+ u32 reg = 0;
+ struct scc_ports *ports;
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ goto end;
+
+ rc = setup_mmio_scc(dev, d->name);
+ if (rc < 0)
+ goto end;
+
+ ports = pci_get_drvdata(dev);
+ ctl_base = ports->ctl;
+ dma_base = ports->dma;
+ cckctrl_port = ctl_base + 0xff0;
+ intmask_port = dma_base + 0x010;
+ mode_port = ctl_base + 0x024;
+ ecmode_port = ctl_base + 0xf00;
+
+ /* controller initialization */
+ reg = 0;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_ATACLKOEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_CRST;
+ out_be32((void*)cckctrl_port, reg);
+
+ for (;;) {
+ reg = in_be32((void*)cckctrl_port);
+ if (reg & CCKCTRL_CRST)
+ break;
+ udelay(5000);
+ }
+
+ reg |= CCKCTRL_ATARESET;
+ out_be32((void*)cckctrl_port, reg);
+
+ out_be32((void*)ecmode_port, ECMODE_VALUE);
+ out_be32((void*)mode_port, MODE_JCUSFEN);
+ out_be32((void*)intmask_port, INTMASK_MSK);
+
+ rc = scc_ide_setup_pci_device(dev, d);
+
+ end:
+ return rc;
+}
+
+static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
+{
+ struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+
+ if (valid & IDE_VALID_FEATURE)
+ scc_ide_outb(tf->feature, io_ports->feature_addr);
+ if (valid & IDE_VALID_NSECT)
+ scc_ide_outb(tf->nsect, io_ports->nsect_addr);
+ if (valid & IDE_VALID_LBAL)
+ scc_ide_outb(tf->lbal, io_ports->lbal_addr);
+ if (valid & IDE_VALID_LBAM)
+ scc_ide_outb(tf->lbam, io_ports->lbam_addr);
+ if (valid & IDE_VALID_LBAH)
+ scc_ide_outb(tf->lbah, io_ports->lbah_addr);
+ if (valid & IDE_VALID_DEVICE)
+ scc_ide_outb(tf->device, io_ports->device_addr);
+}
+
+static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
+{
+ struct ide_io_ports *io_ports = &drive->hwif->io_ports;
+
+ if (valid & IDE_VALID_ERROR)
+ tf->error = scc_ide_inb(io_ports->feature_addr);
+ if (valid & IDE_VALID_NSECT)
+ tf->nsect = scc_ide_inb(io_ports->nsect_addr);
+ if (valid & IDE_VALID_LBAL)
+ tf->lbal = scc_ide_inb(io_ports->lbal_addr);
+ if (valid & IDE_VALID_LBAM)
+ tf->lbam = scc_ide_inb(io_ports->lbam_addr);
+ if (valid & IDE_VALID_LBAH)
+ tf->lbah = scc_ide_inb(io_ports->lbah_addr);
+ if (valid & IDE_VALID_DEVICE)
+ tf->device = scc_ide_inb(io_ports->device_addr);
+}
+
+static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ len++;
+
+ if (drive->io_32bit) {
+ scc_ide_insl(data_addr, buf, len / 4);
+
+ if ((len & 3) >= 2)
+ scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
+ } else
+ scc_ide_insw(data_addr, buf, len / 2);
+}
+
+static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
+ void *buf, unsigned int len)
+{
+ unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+ len++;
+
+ if (drive->io_32bit) {
+ scc_ide_outsl(data_addr, buf, len / 4);
+
+ if ((len & 3) >= 2)
+ scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
+ } else
+ scc_ide_outsw(data_addr, buf, len / 2);
+}
+
+/**
+ * init_mmio_iops_scc - set up the iops for MMIO
+ * @hwif: interface to set up
+ *
+ */
+
+static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ unsigned long dma_base = ports->dma;
+
+ ide_set_hwifdata(hwif, ports);
+
+ hwif->dma_base = dma_base;
+ hwif->config_data = ports->ctl;
+}
+
+/**
+ * init_iops_scc - set up iops
+ * @hwif: interface to set up
+ *
+ * Do the basic setup for the SCC hardware interface
+ * and then do the MMIO setup.
+ */
+
+static void __devinit init_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+
+ hwif->hwif_data = NULL;
+ if (pci_get_drvdata(dev) == NULL)
+ return;
+ init_mmio_iops_scc(hwif);
+}
+
+static int __devinit scc_init_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
+{
+ return ide_allocate_dma_engine(hwif);
+}
+
+static u8 scc_cable_detect(ide_hwif_t *hwif)
+{
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * init_hwif_scc - set up hwif
+ * @hwif: interface to set up
+ *
+ * We do the basic set up of the interface structure. The SCC
+ * requires several custom handlers so we override the default
+ * ide DMA handlers appropriately.
+ */
+
+static void __devinit init_hwif_scc(ide_hwif_t *hwif)
+{
+ /* PTERADD */
+ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
+
+ if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
+ hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
+ else
+ hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
+}
+
+static const struct ide_tp_ops scc_tp_ops = {
+ .exec_command = scc_exec_command,
+ .read_status = scc_read_status,
+ .read_altstatus = scc_read_altstatus,
+ .write_devctl = scc_write_devctl,
+
+ .dev_select = ide_dev_select,
+ .tf_load = scc_tf_load,
+ .tf_read = scc_tf_read,
+
+ .input_data = scc_input_data,
+ .output_data = scc_output_data,
+};
+
+static const struct ide_port_ops scc_port_ops = {
+ .set_pio_mode = scc_set_pio_mode,
+ .set_dma_mode = scc_set_dma_mode,
+ .udma_filter = scc_udma_filter,
+ .cable_detect = scc_cable_detect,
+};
+
+static const struct ide_dma_ops scc_dma_ops = {
+ .dma_host_set = scc_dma_host_set,
+ .dma_setup = scc_dma_setup,
+ .dma_start = scc_dma_start,
+ .dma_end = scc_dma_end,
+ .dma_test_irq = scc_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timer_expiry = ide_dma_sff_timer_expiry,
+ .dma_sff_read_status = scc_dma_sff_read_status,
+};
+
+static const struct ide_port_info scc_chipset __devinitdata = {
+ .name = "sccIDE",
+ .init_iops = init_iops_scc,
+ .init_dma = scc_init_dma,
+ .init_hwif = init_hwif_scc,
+ .tp_ops = &scc_tp_ops,
+ .port_ops = &scc_port_ops,
+ .dma_ops = &scc_dma_ops,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .irq_flags = IRQF_SHARED,
+ .pio_mask = ATA_PIO4,
+ .chipset = ide_pci,
+};
+
+/**
+ * scc_init_one - pci layer discovery entry
+ * @dev: PCI device
+ * @id: ident table entry
+ *
+ * Called by the PCI code when it finds an SCC PATA controller.
+ * We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return init_setup_scc(dev, &scc_chipset);
+}
+
+/**
+ * scc_remove - pci layer remove entry
+ * @dev: PCI device
+ *
+ * Called by the PCI code when it removes an SCC PATA controller.
+ */
+
+static void __devexit scc_remove(struct pci_dev *dev)
+{
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ struct ide_host *host = ports->host;
+
+ ide_host_remove(host);
+
+ iounmap((void*)ports->dma);
+ iounmap((void*)ports->ctl);
+ pci_release_selected_regions(dev, (1 << 2) - 1);
+ memset(ports, 0, sizeof(*ports));
+}
+
+static const struct pci_device_id scc_pci_tbl[] = {
+ { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+
+static struct pci_driver scc_pci_driver = {
+ .name = "SCC IDE",
+ .id_table = scc_pci_tbl,
+ .probe = scc_init_one,
+ .remove = __devexit_p(scc_remove),
+};
+
+static int __init scc_ide_init(void)
+{
+ return ide_pci_register_driver(&scc_pci_driver);
+}
+
+static void __exit scc_ide_exit(void)
+{
+ pci_unregister_driver(&scc_pci_driver);
+}
+
+module_init(scc_ide_init);
+module_exit(scc_ide_exit);
+
+MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
+MODULE_LICENSE("GPL");