zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/leds/leds-clevo-mail.c b/ap/os/linux/linux-3.4.x/drivers/leds/leds-clevo-mail.c
new file mode 100644
index 0000000..1ed1677
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/leds/leds-clevo-mail.c
@@ -0,0 +1,219 @@
+
+#include <linux/module.h>
+
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/leds.h>
+
+#include <linux/io.h>
+#include <linux/dmi.h>
+
+#include <linux/i8042.h>
+
+#define CLEVO_MAIL_LED_OFF 0x0084
+#define CLEVO_MAIL_LED_BLINK_1HZ 0x008A
+#define CLEVO_MAIL_LED_BLINK_0_5HZ 0x0083
+
+MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
+MODULE_DESCRIPTION("Clevo mail LED driver");
+MODULE_LICENSE("GPL");
+
+static bool __initdata nodetect;
+module_param_named(nodetect, nodetect, bool, 0);
+MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
+
+static struct platform_device *pdev;
+
+static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO KBUILD_MODNAME ": '%s' found\n", id->ident);
+ return 1;
+}
+
+/*
+ * struct mail_led_whitelist - List of known good models
+ *
+ * Contains the known good models this driver is compatible with.
+ * When adding a new model try to be as strict as possible. This
+ * makes it possible to keep the false positives (the model is
+ * detected as working, but in reality it is not) as low as
+ * possible.
+ */
+static struct dmi_system_id __initdata mail_led_whitelist[] = {
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo D410J",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "VIA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K8N800"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "VT8204B")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo M5x0N",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M5x0N")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Positivo Mobile",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "CLEVO Co. "),
+ DMI_MATCH(DMI_BOARD_NAME, "M5X0V "),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Positivo Mobile"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "VT6198")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo D400P",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Clevo"),
+ DMI_MATCH(DMI_BOARD_NAME, "D400P"),
+ DMI_MATCH(DMI_BOARD_VERSION, "Rev.A"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0106")
+ }
+ },
+ {
+ .callback = clevo_mail_led_dmi_callback,
+ .ident = "Clevo D410V",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Clevo, Co."),
+ DMI_MATCH(DMI_BOARD_NAME, "D400V/D470V"),
+ DMI_MATCH(DMI_BOARD_VERSION, "SS78B"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Rev. A1")
+ }
+ },
+ { }
+};
+
+static void clevo_mail_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ i8042_lock_chip();
+
+ if (value == LED_OFF)
+ i8042_command(NULL, CLEVO_MAIL_LED_OFF);
+ else if (value <= LED_HALF)
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
+ else
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
+
+ i8042_unlock_chip();
+
+}
+
+static int clevo_mail_led_blink(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ int status = -EINVAL;
+
+ i8042_lock_chip();
+
+ if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
+ /* Special case: the leds subsystem requested us to
+ * chose one user friendly blinking of the LED, and
+ * start it. Let's blink the led slowly (0.5Hz).
+ */
+ *delay_on = 1000; /* ms */
+ *delay_off = 1000; /* ms */
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
+ status = 0;
+
+ } else if (*delay_on == 500 /* ms */ && *delay_off == 500 /* ms */) {
+ /* blink the led with 1Hz */
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
+ status = 0;
+
+ } else if (*delay_on == 1000 /* ms */ && *delay_off == 1000 /* ms */) {
+ /* blink the led with 0.5Hz */
+ i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
+ status = 0;
+
+ } else {
+ printk(KERN_DEBUG KBUILD_MODNAME
+ ": clevo_mail_led_blink(..., %lu, %lu),"
+ " returning -EINVAL (unsupported)\n",
+ *delay_on, *delay_off);
+ }
+
+ i8042_unlock_chip();
+
+ return status;
+}
+
+static struct led_classdev clevo_mail_led = {
+ .name = "clevo::mail",
+ .brightness_set = clevo_mail_led_set,
+ .blink_set = clevo_mail_led_blink,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int __devinit clevo_mail_led_probe(struct platform_device *pdev)
+{
+ return led_classdev_register(&pdev->dev, &clevo_mail_led);
+}
+
+static int clevo_mail_led_remove(struct platform_device *pdev)
+{
+ led_classdev_unregister(&clevo_mail_led);
+ return 0;
+}
+
+static struct platform_driver clevo_mail_led_driver = {
+ .probe = clevo_mail_led_probe,
+ .remove = clevo_mail_led_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init clevo_mail_led_init(void)
+{
+ int error = 0;
+ int count = 0;
+
+ /* Check with the help of DMI if we are running on supported hardware */
+ if (!nodetect) {
+ count = dmi_check_system(mail_led_whitelist);
+ } else {
+ count = 1;
+ printk(KERN_ERR KBUILD_MODNAME ": Skipping DMI detection. "
+ "If the driver works on your hardware please "
+ "report model and the output of dmidecode in tracker "
+ "at http://sourceforge.net/projects/clevo-mailled/\n");
+ }
+
+ if (!count)
+ return -ENODEV;
+
+ pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
+ if (!IS_ERR(pdev)) {
+ error = platform_driver_probe(&clevo_mail_led_driver,
+ clevo_mail_led_probe);
+ if (error) {
+ printk(KERN_ERR KBUILD_MODNAME
+ ": Can't probe platform driver\n");
+ platform_device_unregister(pdev);
+ }
+ } else
+ error = PTR_ERR(pdev);
+
+ return error;
+}
+
+static void __exit clevo_mail_led_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&clevo_mail_led_driver);
+
+ clevo_mail_led_set(NULL, LED_OFF);
+}
+
+module_init(clevo_mail_led_init);
+module_exit(clevo_mail_led_exit);