zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/mmc/host/mmci.h b/ap/os/linux/linux-3.4.x/drivers/mmc/host/mmci.h
new file mode 100644
index 0000000..d437ccf
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/mmc/host/mmci.h
@@ -0,0 +1,211 @@
+/*
+ * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
+ *
+ * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define MMCIPOWER 0x000
+#define MCI_PWR_OFF 0x00
+#define MCI_PWR_UP 0x02
+#define MCI_PWR_ON 0x03
+#define MCI_OD (1 << 6)
+#define MCI_ROD (1 << 7)
+
+#define MMCICLOCK 0x004
+#define MCI_CLK_ENABLE (1 << 8)
+#define MCI_CLK_PWRSAVE (1 << 9)
+#define MCI_CLK_BYPASS (1 << 10)
+#define MCI_4BIT_BUS (1 << 11)
+/*
+ * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
+ * supported in ST Micro U300 and Ux500 versions
+ */
+#define MCI_ST_8BIT_BUS (1 << 12)
+#define MCI_ST_U300_HWFCEN (1 << 13)
+#define MCI_ST_UX500_NEG_EDGE (1 << 13)
+#define MCI_ST_UX500_HWFCEN (1 << 14)
+#define MCI_ST_UX500_CLK_INV (1 << 15)
+
+#define MMCIARGUMENT 0x008
+#define MMCICOMMAND 0x00c
+#define MCI_CPSM_RESPONSE (1 << 6)
+#define MCI_CPSM_LONGRSP (1 << 7)
+#define MCI_CPSM_INTERRUPT (1 << 8)
+#define MCI_CPSM_PENDING (1 << 9)
+#define MCI_CPSM_ENABLE (1 << 10)
+#define MCI_SDIO_SUSP (1 << 11)
+#define MCI_ENCMD_COMPL (1 << 12)
+#define MCI_NIEN (1 << 13)
+#define MCI_CE_ATACMD (1 << 14)
+
+#define MMCIRESPCMD 0x010
+#define MMCIRESPONSE0 0x014
+#define MMCIRESPONSE1 0x018
+#define MMCIRESPONSE2 0x01c
+#define MMCIRESPONSE3 0x020
+#define MMCIDATATIMER 0x024
+#define MMCIDATALENGTH 0x028
+#define MMCIDATACTRL 0x02c
+#define MCI_DPSM_ENABLE (1 << 0)
+#define MCI_DPSM_DIRECTION (1 << 1)
+#define MCI_DPSM_MODE (1 << 2)
+#define MCI_DPSM_DMAENABLE (1 << 3)
+#define MCI_DPSM_BLOCKSIZE (1 << 4)
+/* Control register extensions in the ST Micro U300 and Ux500 versions */
+#define MCI_ST_DPSM_RWSTART (1 << 8)
+#define MCI_ST_DPSM_RWSTOP (1 << 9)
+#define MCI_ST_DPSM_RWMOD (1 << 10)
+#define MCI_ST_DPSM_SDIOEN (1 << 11)
+/* Control register extensions in the ST Micro Ux500 versions */
+#define MCI_ST_DPSM_DMAREQCTL (1 << 12)
+#define MCI_ST_DPSM_DBOOTMODEEN (1 << 13)
+#define MCI_ST_DPSM_BUSYMODE (1 << 14)
+#define MCI_ST_DPSM_DDRMODE (1 << 15)
+
+#define MMCIDATACNT 0x030
+#define MMCISTATUS 0x034
+#define MCI_CMDCRCFAIL (1 << 0)
+#define MCI_DATACRCFAIL (1 << 1)
+#define MCI_CMDTIMEOUT (1 << 2)
+#define MCI_DATATIMEOUT (1 << 3)
+#define MCI_TXUNDERRUN (1 << 4)
+#define MCI_RXOVERRUN (1 << 5)
+#define MCI_CMDRESPEND (1 << 6)
+#define MCI_CMDSENT (1 << 7)
+#define MCI_DATAEND (1 << 8)
+#define MCI_STARTBITERR (1 << 9)
+#define MCI_DATABLOCKEND (1 << 10)
+#define MCI_CMDACTIVE (1 << 11)
+#define MCI_TXACTIVE (1 << 12)
+#define MCI_RXACTIVE (1 << 13)
+#define MCI_TXFIFOHALFEMPTY (1 << 14)
+#define MCI_RXFIFOHALFFULL (1 << 15)
+#define MCI_TXFIFOFULL (1 << 16)
+#define MCI_RXFIFOFULL (1 << 17)
+#define MCI_TXFIFOEMPTY (1 << 18)
+#define MCI_RXFIFOEMPTY (1 << 19)
+#define MCI_TXDATAAVLBL (1 << 20)
+#define MCI_RXDATAAVLBL (1 << 21)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOIT (1 << 22)
+#define MCI_ST_CEATAEND (1 << 23)
+
+#define MMCICLEAR 0x038
+#define MCI_CMDCRCFAILCLR (1 << 0)
+#define MCI_DATACRCFAILCLR (1 << 1)
+#define MCI_CMDTIMEOUTCLR (1 << 2)
+#define MCI_DATATIMEOUTCLR (1 << 3)
+#define MCI_TXUNDERRUNCLR (1 << 4)
+#define MCI_RXOVERRUNCLR (1 << 5)
+#define MCI_CMDRESPENDCLR (1 << 6)
+#define MCI_CMDSENTCLR (1 << 7)
+#define MCI_DATAENDCLR (1 << 8)
+#define MCI_STARTBITERRCLR (1 << 9)
+#define MCI_DATABLOCKENDCLR (1 << 10)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITC (1 << 22)
+#define MCI_ST_CEATAENDC (1 << 23)
+
+#define MMCIMASK0 0x03c
+#define MCI_CMDCRCFAILMASK (1 << 0)
+#define MCI_DATACRCFAILMASK (1 << 1)
+#define MCI_CMDTIMEOUTMASK (1 << 2)
+#define MCI_DATATIMEOUTMASK (1 << 3)
+#define MCI_TXUNDERRUNMASK (1 << 4)
+#define MCI_RXOVERRUNMASK (1 << 5)
+#define MCI_CMDRESPENDMASK (1 << 6)
+#define MCI_CMDSENTMASK (1 << 7)
+#define MCI_DATAENDMASK (1 << 8)
+#define MCI_STARTBITERRMASK (1 << 9)
+#define MCI_DATABLOCKENDMASK (1 << 10)
+#define MCI_CMDACTIVEMASK (1 << 11)
+#define MCI_TXACTIVEMASK (1 << 12)
+#define MCI_RXACTIVEMASK (1 << 13)
+#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
+#define MCI_RXFIFOHALFFULLMASK (1 << 15)
+#define MCI_TXFIFOFULLMASK (1 << 16)
+#define MCI_RXFIFOFULLMASK (1 << 17)
+#define MCI_TXFIFOEMPTYMASK (1 << 18)
+#define MCI_RXFIFOEMPTYMASK (1 << 19)
+#define MCI_TXDATAAVLBLMASK (1 << 20)
+#define MCI_RXDATAAVLBLMASK (1 << 21)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITMASK (1 << 22)
+#define MCI_ST_CEATAENDMASK (1 << 23)
+
+#define MMCIMASK1 0x040
+#define MMCIFIFOCNT 0x048
+#define MMCIFIFO 0x080 /* to 0x0bc */
+
+#define MCI_IRQENABLE \
+ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
+ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
+ MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
+
+/* These interrupts are directed to IRQ1 when two IRQ lines are available */
+#define MCI_IRQ1MASK \
+ (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
+ MCI_TXFIFOHALFEMPTYMASK)
+
+#define NR_SG 128
+
+struct clk;
+struct variant_data;
+struct dma_chan;
+
+struct mmci_host_next {
+ struct dma_async_tx_descriptor *dma_desc;
+ struct dma_chan *dma_chan;
+ s32 cookie;
+};
+
+struct mmci_host {
+ phys_addr_t phybase;
+ void __iomem *base;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ struct mmc_host *mmc;
+ struct clk *clk;
+ int gpio_cd;
+ int gpio_wp;
+ int gpio_cd_irq;
+ bool singleirq;
+
+ spinlock_t lock;
+
+ unsigned int mclk;
+ unsigned int cclk;
+ u32 pwr_reg;
+ u32 clk_reg;
+ struct mmci_platform_data *plat;
+ struct variant_data *variant;
+
+ u8 hw_designer;
+ u8 hw_revision:4;
+
+ struct timer_list timer;
+ unsigned int oldstat;
+
+ /* pio stuff */
+ struct sg_mapping_iter sg_miter;
+ unsigned int size;
+ struct regulator *vcc;
+
+#ifdef CONFIG_DMA_ENGINE
+ /* DMA stuff */
+ struct dma_chan *dma_current;
+ struct dma_chan *dma_rx_channel;
+ struct dma_chan *dma_tx_channel;
+ struct dma_async_tx_descriptor *dma_desc_current;
+ struct mmci_host_next next_data;
+
+#define dma_inprogress(host) ((host)->dma_current)
+#else
+#define dma_inprogress(host) (0)
+#endif
+};
+