zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/mmc/host/sdhci-esdhc-imx.c b/ap/os/linux/linux-3.4.x/drivers/mmc/host/sdhci-esdhc-imx.c
new file mode 100644
index 0000000..be46052
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -0,0 +1,616 @@
+/*
+ * Freescale eSDHC i.MX controller driver for the platform bus.
+ *
+ * derived from the OF-version.
+ *
+ * Copyright (c) 2010 Pengutronix e.K.
+ * Author: Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <mach/esdhc.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define SDHCI_CTRL_D3CD 0x08
+/* VENDOR SPEC register */
+#define SDHCI_VENDOR_SPEC 0xC0
+#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
+#define SDHCI_WTMK_LVL 0x44
+#define SDHCI_MIX_CTRL 0x48
+
+/*
+ * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
+ * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
+ * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
+ * Define this macro DMA error INT for fsl eSDHC
+ */
+#define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000
+
+/*
+ * The CMDTYPE of the CMD register (offset 0xE) should be set to
+ * "11" when the STOP CMD12 is issued on imx53 to abort one
+ * open ended multi-blk IO. Otherwise the TC INT wouldn't
+ * be generated.
+ * In exact block transfer, the controller doesn't complete the
+ * operations automatically as required at the end of the
+ * transfer and remains on hold if the abort command is not sent.
+ * As a result, the TC flag is not asserted and SW received timeout
+ * exeception. Bit1 of Vendor Spec registor is used to fix it.
+ */
+#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
+
+enum imx_esdhc_type {
+ IMX25_ESDHC,
+ IMX35_ESDHC,
+ IMX51_ESDHC,
+ IMX53_ESDHC,
+ IMX6Q_USDHC,
+};
+
+struct pltfm_imx_data {
+ int flags;
+ u32 scratchpad;
+ enum imx_esdhc_type devtype;
+ struct esdhc_platform_data boarddata;
+};
+
+static struct platform_device_id imx_esdhc_devtype[] = {
+ {
+ .name = "sdhci-esdhc-imx25",
+ .driver_data = IMX25_ESDHC,
+ }, {
+ .name = "sdhci-esdhc-imx35",
+ .driver_data = IMX35_ESDHC,
+ }, {
+ .name = "sdhci-esdhc-imx51",
+ .driver_data = IMX51_ESDHC,
+ }, {
+ .name = "sdhci-esdhc-imx53",
+ .driver_data = IMX53_ESDHC,
+ }, {
+ .name = "sdhci-usdhc-imx6q",
+ .driver_data = IMX6Q_USDHC,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype);
+
+static const struct of_device_id imx_esdhc_dt_ids[] = {
+ { .compatible = "fsl,imx25-esdhc", .data = &imx_esdhc_devtype[IMX25_ESDHC], },
+ { .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], },
+ { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], },
+ { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], },
+ { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
+
+static inline int is_imx25_esdhc(struct pltfm_imx_data *data)
+{
+ return data->devtype == IMX25_ESDHC;
+}
+
+static inline int is_imx35_esdhc(struct pltfm_imx_data *data)
+{
+ return data->devtype == IMX35_ESDHC;
+}
+
+static inline int is_imx51_esdhc(struct pltfm_imx_data *data)
+{
+ return data->devtype == IMX51_ESDHC;
+}
+
+static inline int is_imx53_esdhc(struct pltfm_imx_data *data)
+{
+ return data->devtype == IMX53_ESDHC;
+}
+
+static inline int is_imx6q_usdhc(struct pltfm_imx_data *data)
+{
+ return data->devtype == IMX6Q_USDHC;
+}
+
+static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
+{
+ void __iomem *base = host->ioaddr + (reg & ~0x3);
+ u32 shift = (reg & 0x3) * 8;
+
+ writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
+}
+
+static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+
+ /* fake CARD_PRESENT flag */
+ u32 val = readl(host->ioaddr + reg);
+
+ if (unlikely((reg == SDHCI_PRESENT_STATE)
+ && gpio_is_valid(boarddata->cd_gpio))) {
+ if (gpio_get_value(boarddata->cd_gpio))
+ /* no card, if a valid gpio says so... */
+ val &= ~SDHCI_CARD_PRESENT;
+ else
+ /* ... in all other cases assume card is present */
+ val |= SDHCI_CARD_PRESENT;
+ }
+
+ if (unlikely(reg == SDHCI_CAPABILITIES)) {
+ /* In FSL esdhc IC module, only bit20 is used to indicate the
+ * ADMA2 capability of esdhc, but this bit is messed up on
+ * some SOCs (e.g. on MX25, MX35 this bit is set, but they
+ * don't actually support ADMA2). So set the BROKEN_ADMA
+ * uirk on MX25/35 platforms.
+ */
+
+ if (val & SDHCI_CAN_DO_ADMA1) {
+ val &= ~SDHCI_CAN_DO_ADMA1;
+ val |= SDHCI_CAN_DO_ADMA2;
+ }
+ }
+
+ if (unlikely(reg == SDHCI_INT_STATUS)) {
+ if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) {
+ val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+ val |= SDHCI_INT_ADMA_ERROR;
+ }
+ }
+
+ return val;
+}
+
+static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+ u32 data;
+
+ if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
+ if (boarddata->cd_type == ESDHC_CD_GPIO)
+ /*
+ * These interrupts won't work with a custom
+ * card_detect gpio (only applied to mx25/35)
+ */
+ val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+
+ if (val & SDHCI_INT_CARD_INT) {
+ /*
+ * Clear and then set D3CD bit to avoid missing the
+ * card interrupt. This is a eSDHC controller problem
+ * so we need to apply the following workaround: clear
+ * and set D3CD bit will make eSDHC re-sample the card
+ * interrupt. In case a card interrupt was lost,
+ * re-sample it by the following steps.
+ */
+ data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
+ data &= ~SDHCI_CTRL_D3CD;
+ writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+ data |= SDHCI_CTRL_D3CD;
+ writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+ }
+ }
+
+ if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+ && (reg == SDHCI_INT_STATUS)
+ && (val & SDHCI_INT_DATA_END))) {
+ u32 v;
+ v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
+ v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
+ writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+ }
+
+ if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
+ if (val & SDHCI_INT_ADMA_ERROR) {
+ val &= ~SDHCI_INT_ADMA_ERROR;
+ val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+ }
+ }
+
+ writel(val, host->ioaddr + reg);
+}
+
+static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+ if (unlikely(reg == SDHCI_HOST_VERSION)) {
+ reg ^= 2;
+ if (is_imx6q_usdhc(imx_data)) {
+ /*
+ * The usdhc register returns a wrong host version.
+ * Correct it here.
+ */
+ return SDHCI_SPEC_300;
+ }
+ }
+
+ return readw(host->ioaddr + reg);
+}
+
+static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+ switch (reg) {
+ case SDHCI_TRANSFER_MODE:
+ /*
+ * Postpone this write, we must do it together with a
+ * command write that is down below.
+ */
+ if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+ && (host->cmd->opcode == SD_IO_RW_EXTENDED)
+ && (host->cmd->data->blocks > 1)
+ && (host->cmd->data->flags & MMC_DATA_READ)) {
+ u32 v;
+ v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
+ v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
+ writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+ }
+ imx_data->scratchpad = val;
+ return;
+ case SDHCI_COMMAND:
+ if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
+ host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
+ (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+ val |= SDHCI_CMD_ABORTCMD;
+
+ if (is_imx6q_usdhc(imx_data)) {
+ u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL);
+ m = imx_data->scratchpad | (m & 0xffff0000);
+ writel(m, host->ioaddr + SDHCI_MIX_CTRL);
+ writel(val << 16,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ } else {
+ writel(val << 16 | imx_data->scratchpad,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ }
+ return;
+ case SDHCI_BLOCK_SIZE:
+ val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+ break;
+ }
+ esdhc_clrset_le(host, 0xffff, val, reg);
+}
+
+static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
+{
+ u32 new_val;
+
+ switch (reg) {
+ case SDHCI_POWER_CONTROL:
+ /*
+ * FSL put some DMA bits here
+ * If your board has a regulator, code should be here
+ */
+ return;
+ case SDHCI_HOST_CONTROL:
+ /* FSL messed up here, so we can just keep those three */
+ new_val = val & (SDHCI_CTRL_LED | \
+ SDHCI_CTRL_4BITBUS | \
+ SDHCI_CTRL_D3CD);
+ /* ensure the endianess */
+ new_val |= ESDHC_HOST_CONTROL_LE;
+ /* DMA mode bits are shifted */
+ new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
+
+ esdhc_clrset_le(host, 0xffff, new_val, reg);
+ return;
+ }
+ esdhc_clrset_le(host, 0xff, val, reg);
+
+ /*
+ * The esdhc has a design violation to SDHC spec which tells
+ * that software reset should not affect card detection circuit.
+ * But esdhc clears its SYSCTL register bits [0..2] during the
+ * software reset. This will stop those clocks that card detection
+ * circuit relies on. To work around it, we turn the clocks on back
+ * to keep card detection circuit functional.
+ */
+ if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1))
+ esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
+}
+
+static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_get_rate(pltfm_host->clk);
+}
+
+static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_get_rate(pltfm_host->clk) / 256 / 16;
+}
+
+static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+
+ switch (boarddata->wp_type) {
+ case ESDHC_WP_GPIO:
+ if (gpio_is_valid(boarddata->wp_gpio))
+ return gpio_get_value(boarddata->wp_gpio);
+ case ESDHC_WP_CONTROLLER:
+ return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
+ SDHCI_WRITE_PROTECT);
+ case ESDHC_WP_NONE:
+ break;
+ }
+
+ return -ENOSYS;
+}
+
+static struct sdhci_ops sdhci_esdhc_ops = {
+ .read_l = esdhc_readl_le,
+ .read_w = esdhc_readw_le,
+ .write_l = esdhc_writel_le,
+ .write_w = esdhc_writew_le,
+ .write_b = esdhc_writeb_le,
+ .set_clock = esdhc_set_clock,
+ .get_max_clock = esdhc_pltfm_get_max_clock,
+ .get_min_clock = esdhc_pltfm_get_min_clock,
+ .get_ro = esdhc_pltfm_get_ro,
+};
+
+static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
+ | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+ | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
+ | SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ .ops = &sdhci_esdhc_ops,
+};
+
+static irqreturn_t cd_irq(int irq, void *data)
+{
+ struct sdhci_host *sdhost = (struct sdhci_host *)data;
+
+ tasklet_schedule(&sdhost->card_tasklet);
+ return IRQ_HANDLED;
+};
+
+#ifdef CONFIG_OF
+static int __devinit
+sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+ struct esdhc_platform_data *boarddata)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ if (!np)
+ return -ENODEV;
+
+ if (of_get_property(np, "fsl,card-wired", NULL))
+ boarddata->cd_type = ESDHC_CD_PERMANENT;
+
+ if (of_get_property(np, "fsl,cd-controller", NULL))
+ boarddata->cd_type = ESDHC_CD_CONTROLLER;
+
+ if (of_get_property(np, "fsl,wp-controller", NULL))
+ boarddata->wp_type = ESDHC_WP_CONTROLLER;
+
+ boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+ if (gpio_is_valid(boarddata->cd_gpio))
+ boarddata->cd_type = ESDHC_CD_GPIO;
+
+ boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
+ if (gpio_is_valid(boarddata->wp_gpio))
+ boarddata->wp_type = ESDHC_WP_GPIO;
+
+ return 0;
+}
+#else
+static inline int
+sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
+ struct esdhc_platform_data *boarddata)
+{
+ return -ENODEV;
+}
+#endif
+
+static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(imx_esdhc_dt_ids, &pdev->dev);
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_host *host;
+ struct esdhc_platform_data *boarddata;
+ struct clk *clk;
+ int err;
+ struct pltfm_imx_data *imx_data;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+
+ imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
+ if (!imx_data) {
+ err = -ENOMEM;
+ goto err_imx_data;
+ }
+
+ if (of_id)
+ pdev->id_entry = of_id->data;
+ imx_data->devtype = pdev->id_entry->driver_data;
+ pltfm_host->priv = imx_data;
+
+ clk = clk_get(mmc_dev(host->mmc), NULL);
+ if (IS_ERR(clk)) {
+ dev_err(mmc_dev(host->mmc), "clk err\n");
+ err = PTR_ERR(clk);
+ goto err_clk_get;
+ }
+ clk_prepare_enable(clk);
+ pltfm_host->clk = clk;
+
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
+ /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
+ host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
+ | SDHCI_QUIRK_BROKEN_ADMA;
+
+ if (is_imx53_esdhc(imx_data))
+ imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
+
+ /*
+ * The imx6q ROM code will change the default watermark level setting
+ * to something insane. Change it back here.
+ */
+ if (is_imx6q_usdhc(imx_data))
+ writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+
+ boarddata = &imx_data->boarddata;
+ if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
+ if (!host->mmc->parent->platform_data) {
+ dev_err(mmc_dev(host->mmc), "no board data!\n");
+ err = -EINVAL;
+ goto no_board_data;
+ }
+ imx_data->boarddata = *((struct esdhc_platform_data *)
+ host->mmc->parent->platform_data);
+ }
+
+ /* write_protect */
+ if (boarddata->wp_type == ESDHC_WP_GPIO) {
+ err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
+ if (err) {
+ dev_warn(mmc_dev(host->mmc),
+ "no write-protect pin available!\n");
+ boarddata->wp_gpio = -EINVAL;
+ }
+ } else {
+ boarddata->wp_gpio = -EINVAL;
+ }
+
+ /* card_detect */
+ if (boarddata->cd_type != ESDHC_CD_GPIO)
+ boarddata->cd_gpio = -EINVAL;
+
+ switch (boarddata->cd_type) {
+ case ESDHC_CD_GPIO:
+ err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
+ if (err) {
+ dev_err(mmc_dev(host->mmc),
+ "no card-detect pin available!\n");
+ goto no_card_detect_pin;
+ }
+
+ err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ mmc_hostname(host->mmc), host);
+ if (err) {
+ dev_err(mmc_dev(host->mmc), "request irq error\n");
+ goto no_card_detect_irq;
+ }
+ /* fall through */
+
+ case ESDHC_CD_CONTROLLER:
+ /* we have a working card_detect back */
+ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ break;
+
+ case ESDHC_CD_PERMANENT:
+ host->mmc->caps = MMC_CAP_NONREMOVABLE;
+ break;
+
+ case ESDHC_CD_NONE:
+ break;
+ }
+
+ err = sdhci_add_host(host);
+ if (err)
+ goto err_add_host;
+
+ return 0;
+
+err_add_host:
+ if (gpio_is_valid(boarddata->cd_gpio))
+ free_irq(gpio_to_irq(boarddata->cd_gpio), host);
+no_card_detect_irq:
+ if (gpio_is_valid(boarddata->cd_gpio))
+ gpio_free(boarddata->cd_gpio);
+ if (gpio_is_valid(boarddata->wp_gpio))
+ gpio_free(boarddata->wp_gpio);
+no_card_detect_pin:
+no_board_data:
+ clk_disable_unprepare(pltfm_host->clk);
+ clk_put(pltfm_host->clk);
+err_clk_get:
+ kfree(imx_data);
+err_imx_data:
+ sdhci_pltfm_free(pdev);
+ return err;
+}
+
+static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+ int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+ sdhci_remove_host(host, dead);
+
+ if (gpio_is_valid(boarddata->wp_gpio))
+ gpio_free(boarddata->wp_gpio);
+
+ if (gpio_is_valid(boarddata->cd_gpio)) {
+ free_irq(gpio_to_irq(boarddata->cd_gpio), host);
+ gpio_free(boarddata->cd_gpio);
+ }
+
+ clk_disable_unprepare(pltfm_host->clk);
+ clk_put(pltfm_host->clk);
+ kfree(imx_data);
+
+ sdhci_pltfm_free(pdev);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_esdhc_imx_driver = {
+ .driver = {
+ .name = "sdhci-esdhc-imx",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_esdhc_dt_ids,
+ .pm = SDHCI_PLTFM_PMOPS,
+ },
+ .id_table = imx_esdhc_devtype,
+ .probe = sdhci_esdhc_imx_probe,
+ .remove = __devexit_p(sdhci_esdhc_imx_remove),
+};
+
+module_platform_driver(sdhci_esdhc_imx_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
+MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_LICENSE("GPL v2");