zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/mtd/nand/s3c2410.c b/ap/os/linux/linux-3.4.x/drivers/mtd/nand/s3c2410.c
new file mode 100644
index 0000000..91121f3
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/mtd/nand/s3c2410.c
@@ -0,0 +1,1154 @@
+/* linux/drivers/mtd/nand/s3c2410.c
+ *
+ * Copyright © 2004-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#ifdef CONFIG_MTD_NAND_S3C2410_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+
+#include <plat/regs-nand.h>
+#include <plat/nand.h>
+
+#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
+static int hardware_ecc = 1;
+#else
+static int hardware_ecc = 0;
+#endif
+
+#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
+static const int clock_stop = 1;
+#else
+static const int clock_stop = 0;
+#endif
+
+
+/* new oob placement block for use with hardware ecc generation
+ */
+
+static struct nand_ecclayout nand_hw_eccoob = {
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {{8, 8}}
+};
+
+/* controller and mtd information */
+
+struct s3c2410_nand_info;
+
+/**
+ * struct s3c2410_nand_mtd - driver MTD structure
+ * @mtd: The MTD instance to pass to the MTD layer.
+ * @chip: The NAND chip information.
+ * @set: The platform information supplied for this set of NAND chips.
+ * @info: Link back to the hardware information.
+ * @scan_res: The result from calling nand_scan_ident().
+*/
+struct s3c2410_nand_mtd {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct s3c2410_nand_set *set;
+ struct s3c2410_nand_info *info;
+ int scan_res;
+};
+
+enum s3c_cpu_type {
+ TYPE_S3C2410,
+ TYPE_S3C2412,
+ TYPE_S3C2440,
+};
+
+enum s3c_nand_clk_state {
+ CLOCK_DISABLE = 0,
+ CLOCK_ENABLE,
+ CLOCK_SUSPEND,
+};
+
+/* overview of the s3c2410 nand state */
+
+/**
+ * struct s3c2410_nand_info - NAND controller state.
+ * @mtds: An array of MTD instances on this controoler.
+ * @platform: The platform data for this board.
+ * @device: The platform device we bound to.
+ * @area: The IO area resource that came from request_mem_region().
+ * @clk: The clock resource for this controller.
+ * @regs: The area mapped for the hardware registers described by @area.
+ * @sel_reg: Pointer to the register controlling the NAND selection.
+ * @sel_bit: The bit in @sel_reg to select the NAND chip.
+ * @mtd_count: The number of MTDs created from this controller.
+ * @save_sel: The contents of @sel_reg to be saved over suspend.
+ * @clk_rate: The clock rate from @clk.
+ * @clk_state: The current clock state.
+ * @cpu_type: The exact type of this controller.
+ */
+struct s3c2410_nand_info {
+ /* mtd info */
+ struct nand_hw_control controller;
+ struct s3c2410_nand_mtd *mtds;
+ struct s3c2410_platform_nand *platform;
+
+ /* device info */
+ struct device *device;
+ struct resource *area;
+ struct clk *clk;
+ void __iomem *regs;
+ void __iomem *sel_reg;
+ int sel_bit;
+ int mtd_count;
+ unsigned long save_sel;
+ unsigned long clk_rate;
+ enum s3c_nand_clk_state clk_state;
+
+ enum s3c_cpu_type cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
+};
+
+/* conversion functions */
+
+static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct s3c2410_nand_mtd, mtd);
+}
+
+static struct s3c2410_nand_info *s3c2410_nand_mtd_toinfo(struct mtd_info *mtd)
+{
+ return s3c2410_nand_mtd_toours(mtd)->info;
+}
+
+static struct s3c2410_nand_info *to_nand_info(struct platform_device *dev)
+{
+ return platform_get_drvdata(dev);
+}
+
+static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev)
+{
+ return dev->dev.platform_data;
+}
+
+static inline int allow_clk_suspend(struct s3c2410_nand_info *info)
+{
+ return clock_stop;
+}
+
+/**
+ * s3c2410_nand_clk_set_state - Enable, disable or suspend NAND clock.
+ * @info: The controller instance.
+ * @new_state: State to which clock should be set.
+ */
+static void s3c2410_nand_clk_set_state(struct s3c2410_nand_info *info,
+ enum s3c_nand_clk_state new_state)
+{
+ if (!allow_clk_suspend(info) && new_state == CLOCK_SUSPEND)
+ return;
+
+ if (info->clk_state == CLOCK_ENABLE) {
+ if (new_state != CLOCK_ENABLE)
+ clk_disable(info->clk);
+ } else {
+ if (new_state == CLOCK_ENABLE)
+ clk_enable(info->clk);
+ }
+
+ info->clk_state = new_state;
+}
+
+/* timing calculations */
+
+#define NS_IN_KHZ 1000000
+
+/**
+ * s3c_nand_calc_rate - calculate timing data.
+ * @wanted: The cycle time in nanoseconds.
+ * @clk: The clock rate in kHz.
+ * @max: The maximum divider value.
+ *
+ * Calculate the timing value from the given parameters.
+ */
+static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
+{
+ int result;
+
+ result = DIV_ROUND_UP((wanted * clk), NS_IN_KHZ);
+
+ pr_debug("result %d from %ld, %d\n", result, clk, wanted);
+
+ if (result > max) {
+ printk("%d ns is too big for current clock rate %ld\n", wanted, clk);
+ return -1;
+ }
+
+ if (result < 1)
+ result = 1;
+
+ return result;
+}
+
+#define to_ns(ticks,clk) (((ticks) * NS_IN_KHZ) / (unsigned int)(clk))
+
+/* controller setup */
+
+/**
+ * s3c2410_nand_setrate - setup controller timing information.
+ * @info: The controller instance.
+ *
+ * Given the information supplied by the platform, calculate and set
+ * the necessary timing registers in the hardware to generate the
+ * necessary timing cycles to the hardware.
+ */
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
+{
+ struct s3c2410_platform_nand *plat = info->platform;
+ int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
+ int tacls, twrph0, twrph1;
+ unsigned long clkrate = clk_get_rate(info->clk);
+ unsigned long uninitialized_var(set), cfg, uninitialized_var(mask);
+ unsigned long flags;
+
+ /* calculate the timing information for the controller */
+
+ info->clk_rate = clkrate;
+ clkrate /= 1000; /* turn clock into kHz for ease of use */
+
+ if (plat != NULL) {
+ tacls = s3c_nand_calc_rate(plat->tacls, clkrate, tacls_max);
+ twrph0 = s3c_nand_calc_rate(plat->twrph0, clkrate, 8);
+ twrph1 = s3c_nand_calc_rate(plat->twrph1, clkrate, 8);
+ } else {
+ /* default timings */
+ tacls = tacls_max;
+ twrph0 = 8;
+ twrph1 = 8;
+ }
+
+ if (tacls < 0 || twrph0 < 0 || twrph1 < 0) {
+ dev_err(info->device, "cannot get suitable timings\n");
+ return -EINVAL;
+ }
+
+ dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
+ tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ mask = (S3C2410_NFCONF_TACLS(3) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+ set = S3C2410_NFCONF_EN;
+ set |= S3C2410_NFCONF_TACLS(tacls - 1);
+ set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
+ mask = (S3C2440_NFCONF_TACLS(tacls_max - 1) |
+ S3C2440_NFCONF_TWRPH0(7) |
+ S3C2440_NFCONF_TWRPH1(7));
+
+ set = S3C2440_NFCONF_TACLS(tacls - 1);
+ set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ default:
+ BUG();
+ }
+
+ local_irq_save(flags);
+
+ cfg = readl(info->regs + S3C2410_NFCONF);
+ cfg &= ~mask;
+ cfg |= set;
+ writel(cfg, info->regs + S3C2410_NFCONF);
+
+ local_irq_restore(flags);
+
+ dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+ return 0;
+}
+
+/**
+ * s3c2410_nand_inithw - basic hardware initialisation
+ * @info: The hardware state.
+ *
+ * Do the basic initialisation of the hardware, using s3c2410_nand_setrate()
+ * to setup the hardware access speeds and set the controller to be enabled.
+*/
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+ int ret;
+
+ ret = s3c2410_nand_setrate(info);
+ if (ret < 0)
+ return ret;
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ default:
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
+ /* enable the controller and de-assert nFCE */
+
+ writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
+ }
+
+ return 0;
+}
+
+/**
+ * s3c2410_nand_select_chip - select the given nand chip
+ * @mtd: The MTD instance for this chip.
+ * @chip: The chip number.
+ *
+ * This is called by the MTD layer to either select a given chip for the
+ * @mtd instance, or to indicate that the access has finished and the
+ * chip can be de-selected.
+ *
+ * The routine ensures that the nFCE line is correctly setup, and any
+ * platform specific selection code is called to route nFCE to the specific
+ * chip.
+ */
+static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct s3c2410_nand_info *info;
+ struct s3c2410_nand_mtd *nmtd;
+ struct nand_chip *this = mtd->priv;
+ unsigned long cur;
+
+ nmtd = this->priv;
+ info = nmtd->info;
+
+ if (chip != -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
+
+ cur = readl(info->sel_reg);
+
+ if (chip == -1) {
+ cur |= info->sel_bit;
+ } else {
+ if (nmtd->set != NULL && chip > nmtd->set->nr_chips) {
+ dev_err(info->device, "invalid chip %d\n", chip);
+ return;
+ }
+
+ if (info->platform != NULL) {
+ if (info->platform->select_chip != NULL)
+ (info->platform->select_chip) (nmtd->set, chip);
+ }
+
+ cur &= ~info->sel_bit;
+ }
+
+ writel(cur, info->sel_reg);
+
+ if (chip == -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
+}
+
+/* s3c2410_nand_hwcontrol
+ *
+ * Issue command and address cycles to the chip
+*/
+
+static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, info->regs + S3C2410_NFCMD);
+ else
+ writeb(cmd, info->regs + S3C2410_NFADDR);
+}
+
+/* command and control functions */
+
+static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, info->regs + S3C2440_NFCMD);
+ else
+ writeb(cmd, info->regs + S3C2440_NFADDR);
+}
+
+/* s3c2410_nand_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+*/
+
+static int s3c2410_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
+}
+
+static int s3c2440_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY;
+}
+
+static int s3c2412_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2412_NFSTAT) & S3C2412_NFSTAT_READY;
+}
+
+/* ECC handling functions */
+
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned int diff0, diff1, diff2;
+ unsigned int bit, byte;
+
+ pr_debug("%s(%p,%p,%p,%p)\n", __func__, mtd, dat, read_ecc, calc_ecc);
+
+ diff0 = read_ecc[0] ^ calc_ecc[0];
+ diff1 = read_ecc[1] ^ calc_ecc[1];
+ diff2 = read_ecc[2] ^ calc_ecc[2];
+
+ pr_debug("%s: rd %02x%02x%02x calc %02x%02x%02x diff %02x%02x%02x\n",
+ __func__,
+ read_ecc[0], read_ecc[1], read_ecc[2],
+ calc_ecc[0], calc_ecc[1], calc_ecc[2],
+ diff0, diff1, diff2);
+
+ if (diff0 == 0 && diff1 == 0 && diff2 == 0)
+ return 0; /* ECC is ok */
+
+ /* sometimes people do not think about using the ECC, so check
+ * to see if we have an 0xff,0xff,0xff read ECC and then ignore
+ * the error, on the assumption that this is an un-eccd page.
+ */
+ if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && read_ecc[2] == 0xff
+ && info->platform->ignore_unset_ecc)
+ return 0;
+
+ /* Can we correct this ECC (ie, one row and column change).
+ * Note, this is similar to the 256 error code on smartmedia */
+
+ if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
+ ((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
+ ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
+ /* calculate the bit position of the error */
+
+ bit = ((diff2 >> 3) & 1) |
+ ((diff2 >> 4) & 2) |
+ ((diff2 >> 5) & 4);
+
+ /* calculate the byte position of the error */
+
+ byte = ((diff2 << 7) & 0x100) |
+ ((diff1 << 0) & 0x80) |
+ ((diff1 << 1) & 0x40) |
+ ((diff1 << 2) & 0x20) |
+ ((diff1 << 3) & 0x10) |
+ ((diff0 >> 4) & 0x08) |
+ ((diff0 >> 3) & 0x04) |
+ ((diff0 >> 2) & 0x02) |
+ ((diff0 >> 1) & 0x01);
+
+ dev_dbg(info->device, "correcting error bit %d, byte %d\n",
+ bit, byte);
+
+ dat[byte] ^= (1 << bit);
+ return 1;
+ }
+
+ /* if there is only one bit difference in the ECC, then
+ * one of only a row or column parity has changed, which
+ * means the error is most probably in the ECC itself */
+
+ diff0 |= (diff1 << 8);
+ diff0 |= (diff2 << 16);
+
+ if ((diff0 & ~(1<<fls(diff0))) == 0)
+ return 1;
+
+ return -1;
+}
+
+/* ECC functions
+ *
+ * These allow the s3c2410 and s3c2440 to use the controller's ECC
+ * generator block to ECC the data as it passes through]
+*/
+
+static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2410_NFCONF);
+ ctrl |= S3C2410_NFCONF_INITECC;
+ writel(ctrl, info->regs + S3C2410_NFCONF);
+}
+
+static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2440_NFCONT);
+ writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT);
+}
+
+static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2440_NFCONT);
+ writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT);
+}
+
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ ecc_code[0] = readb(info->regs + S3C2410_NFECC + 0);
+ ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
+ ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
+
+ pr_debug("%s: returning ecc %02x%02x%02x\n", __func__,
+ ecc_code[0], ecc_code[1], ecc_code[2]);
+
+ return 0;
+}
+
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
+
+ ecc_code[0] = ecc;
+ ecc_code[1] = ecc >> 8;
+ ecc_code[2] = ecc >> 16;
+
+ pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
+
+ return 0;
+}
+
+static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ecc = readl(info->regs + S3C2440_NFMECC0);
+
+ ecc_code[0] = ecc;
+ ecc_code[1] = ecc >> 8;
+ ecc_code[2] = ecc >> 16;
+
+ pr_debug("%s: returning ecc %06lx\n", __func__, ecc & 0xffffff);
+
+ return 0;
+}
+
+/* over-ride the standard functions for a little more speed. We can
+ * use read/write block to move the data buffers to/from the controller
+*/
+
+static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ readsb(this->IO_ADDR_R, buf, len);
+}
+
+static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ readsl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+ /* cleanup if we've got less than a word to do */
+ if (len & 3) {
+ buf += len & ~3;
+
+ for (; len & 3; len--)
+ *buf++ = readb(info->regs + S3C2440_NFDATA);
+ }
+}
+
+static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ writesb(this->IO_ADDR_W, buf, len);
+}
+
+static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ writesl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+ /* cleanup any fractional write */
+ if (len & 3) {
+ buf += len & ~3;
+
+ for (; len & 3; len--, buf++)
+ writeb(*buf, info->regs + S3C2440_NFDATA);
+ }
+}
+
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c2410_nand_info *info;
+ unsigned long newclk;
+
+ info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+ newclk = clk_get_rate(info->clk);
+
+ if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+ (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+ s3c2410_nand_setrate(info);
+ }
+
+ return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+ return cpufreq_register_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+ cpufreq_unregister_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
+/* device management functions */
+
+static int s3c24xx_nand_remove(struct platform_device *pdev)
+{
+ struct s3c2410_nand_info *info = to_nand_info(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (info == NULL)
+ return 0;
+
+ s3c2410_nand_cpufreq_deregister(info);
+
+ /* Release all our mtds and their partitions, then go through
+ * freeing the resources used
+ */
+
+ if (info->mtds != NULL) {
+ struct s3c2410_nand_mtd *ptr = info->mtds;
+ int mtdno;
+
+ for (mtdno = 0; mtdno < info->mtd_count; mtdno++, ptr++) {
+ pr_debug("releasing mtd %d (%p)\n", mtdno, ptr);
+ nand_release(&ptr->mtd);
+ }
+
+ kfree(info->mtds);
+ }
+
+ /* free the common resources */
+
+ if (!IS_ERR(info->clk)) {
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
+ clk_put(info->clk);
+ }
+
+ if (info->regs != NULL) {
+ iounmap(info->regs);
+ info->regs = NULL;
+ }
+
+ if (info->area != NULL) {
+ release_resource(info->area);
+ kfree(info->area);
+ info->area = NULL;
+ }
+
+ kfree(info);
+
+ return 0;
+}
+
+static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
+ struct s3c2410_nand_mtd *mtd,
+ struct s3c2410_nand_set *set)
+{
+ if (set)
+ mtd->mtd.name = set->name;
+
+ return mtd_device_parse_register(&mtd->mtd, NULL, NULL,
+ set->partitions, set->nr_partitions);
+}
+
+/**
+ * s3c2410_nand_init_chip - initialise a single instance of an chip
+ * @info: The base NAND controller the chip is on.
+ * @nmtd: The new controller MTD instance to fill in.
+ * @set: The information passed from the board specific platform data.
+ *
+ * Initialise the given @nmtd from the information in @info and @set. This
+ * readies the structure for use with the MTD layer functions by ensuring
+ * all pointers are setup and the necessary control routines selected.
+ */
+static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
+ struct s3c2410_nand_mtd *nmtd,
+ struct s3c2410_nand_set *set)
+{
+ struct nand_chip *chip = &nmtd->chip;
+ void __iomem *regs = info->regs;
+
+ chip->write_buf = s3c2410_nand_write_buf;
+ chip->read_buf = s3c2410_nand_read_buf;
+ chip->select_chip = s3c2410_nand_select_chip;
+ chip->chip_delay = 50;
+ chip->priv = nmtd;
+ chip->options = set->options;
+ chip->controller = &info->controller;
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->IO_ADDR_W = regs + S3C2410_NFDATA;
+ info->sel_reg = regs + S3C2410_NFCONF;
+ info->sel_bit = S3C2410_NFCONF_nFCE;
+ chip->cmd_ctrl = s3c2410_nand_hwcontrol;
+ chip->dev_ready = s3c2410_nand_devready;
+ break;
+
+ case TYPE_S3C2440:
+ chip->IO_ADDR_W = regs + S3C2440_NFDATA;
+ info->sel_reg = regs + S3C2440_NFCONT;
+ info->sel_bit = S3C2440_NFCONT_nFCE;
+ chip->cmd_ctrl = s3c2440_nand_hwcontrol;
+ chip->dev_ready = s3c2440_nand_devready;
+ chip->read_buf = s3c2440_nand_read_buf;
+ chip->write_buf = s3c2440_nand_write_buf;
+ break;
+
+ case TYPE_S3C2412:
+ chip->IO_ADDR_W = regs + S3C2440_NFDATA;
+ info->sel_reg = regs + S3C2440_NFCONT;
+ info->sel_bit = S3C2412_NFCONT_nFCE0;
+ chip->cmd_ctrl = s3c2440_nand_hwcontrol;
+ chip->dev_ready = s3c2412_nand_devready;
+
+ if (readl(regs + S3C2410_NFCONF) & S3C2412_NFCONF_NANDBOOT)
+ dev_info(info->device, "System booted from NAND\n");
+
+ break;
+ }
+
+ chip->IO_ADDR_R = chip->IO_ADDR_W;
+
+ nmtd->info = info;
+ nmtd->mtd.priv = chip;
+ nmtd->mtd.owner = THIS_MODULE;
+ nmtd->set = set;
+
+ if (hardware_ecc) {
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ chip->ecc.correct = s3c2410_nand_correct_data;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.strength = 1;
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->ecc.hwctl = s3c2410_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ break;
+
+ case TYPE_S3C2412:
+ chip->ecc.hwctl = s3c2412_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+ break;
+
+ case TYPE_S3C2440:
+ chip->ecc.hwctl = s3c2440_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2440_nand_calculate_ecc;
+ break;
+
+ }
+ } else {
+ chip->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ if (set->ecc_layout != NULL)
+ chip->ecc.layout = set->ecc_layout;
+
+ if (set->disable_ecc)
+ chip->ecc.mode = NAND_ECC_NONE;
+
+ switch (chip->ecc.mode) {
+ case NAND_ECC_NONE:
+ dev_info(info->device, "NAND ECC disabled\n");
+ break;
+ case NAND_ECC_SOFT:
+ dev_info(info->device, "NAND soft ECC\n");
+ break;
+ case NAND_ECC_HW:
+ dev_info(info->device, "NAND hardware ECC\n");
+ break;
+ default:
+ dev_info(info->device, "NAND ECC UNKNOWN\n");
+ break;
+ }
+
+ /* If you use u-boot BBT creation code, specifying this flag will
+ * let the kernel fish out the BBT from the NAND, and also skip the
+ * full NAND scan that can take 1/2s or so. Little things... */
+ if (set->flash_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ }
+}
+
+/**
+ * s3c2410_nand_update_chip - post probe update
+ * @info: The controller instance.
+ * @nmtd: The driver version of the MTD instance.
+ *
+ * This routine is called after the chip probe has successfully completed
+ * and the relevant per-chip information updated. This call ensure that
+ * we update the internal state accordingly.
+ *
+ * The internal state is currently limited to the ECC state information.
+*/
+static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
+ struct s3c2410_nand_mtd *nmtd)
+{
+ struct nand_chip *chip = &nmtd->chip;
+
+ dev_dbg(info->device, "chip %p => page shift %d\n",
+ chip, chip->page_shift);
+
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return;
+
+ /* change the behaviour depending on wether we are using
+ * the large or small page nand device */
+
+ if (chip->page_shift > 10) {
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ } else {
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 3;
+ chip->ecc.layout = &nand_hw_eccoob;
+ }
+}
+
+/* s3c24xx_nand_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices
+*/
+static int s3c24xx_nand_probe(struct platform_device *pdev)
+{
+ struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
+ enum s3c_cpu_type cpu_type;
+ struct s3c2410_nand_info *info;
+ struct s3c2410_nand_mtd *nmtd;
+ struct s3c2410_nand_set *sets;
+ struct resource *res;
+ int err = 0;
+ int size;
+ int nr_sets;
+ int setno;
+
+ cpu_type = platform_get_device_id(pdev)->driver_data;
+
+ pr_debug("s3c2410_nand_probe(%p)\n", pdev);
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (info == NULL) {
+ dev_err(&pdev->dev, "no memory for flash info\n");
+ err = -ENOMEM;
+ goto exit_error;
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ spin_lock_init(&info->controller.lock);
+ init_waitqueue_head(&info->controller.wq);
+
+ /* get the clock source and enable it */
+
+ info->clk = clk_get(&pdev->dev, "nand");
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ err = -ENOENT;
+ goto exit_error;
+ }
+
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
+
+ /* allocate and map the resource */
+
+ /* currently we assume we have the one resource */
+ res = pdev->resource;
+ size = resource_size(res);
+
+ info->area = request_mem_region(res->start, size, pdev->name);
+
+ if (info->area == NULL) {
+ dev_err(&pdev->dev, "cannot reserve register region\n");
+ err = -ENOENT;
+ goto exit_error;
+ }
+
+ info->device = &pdev->dev;
+ info->platform = plat;
+ info->regs = ioremap(res->start, size);
+ info->cpu_type = cpu_type;
+
+ if (info->regs == NULL) {
+ dev_err(&pdev->dev, "cannot reserve register region\n");
+ err = -EIO;
+ goto exit_error;
+ }
+
+ dev_dbg(&pdev->dev, "mapped registers at %p\n", info->regs);
+
+ /* initialise the hardware */
+
+ err = s3c2410_nand_inithw(info);
+ if (err != 0)
+ goto exit_error;
+
+ sets = (plat != NULL) ? plat->sets : NULL;
+ nr_sets = (plat != NULL) ? plat->nr_sets : 1;
+
+ info->mtd_count = nr_sets;
+
+ /* allocate our information */
+
+ size = nr_sets * sizeof(*info->mtds);
+ info->mtds = kzalloc(size, GFP_KERNEL);
+ if (info->mtds == NULL) {
+ dev_err(&pdev->dev, "failed to allocate mtd storage\n");
+ err = -ENOMEM;
+ goto exit_error;
+ }
+
+ /* initialise all possible chips */
+
+ nmtd = info->mtds;
+
+ for (setno = 0; setno < nr_sets; setno++, nmtd++) {
+ pr_debug("initialising set %d (%p, info %p)\n", setno, nmtd, info);
+
+ s3c2410_nand_init_chip(info, nmtd, sets);
+
+ nmtd->scan_res = nand_scan_ident(&nmtd->mtd,
+ (sets) ? sets->nr_chips : 1,
+ NULL);
+
+ if (nmtd->scan_res == 0) {
+ s3c2410_nand_update_chip(info, nmtd);
+ nand_scan_tail(&nmtd->mtd);
+ s3c2410_nand_add_partition(info, nmtd, sets);
+ }
+
+ if (sets != NULL)
+ sets++;
+ }
+
+ err = s3c2410_nand_cpufreq_register(info);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to init cpufreq support\n");
+ goto exit_error;
+ }
+
+ if (allow_clk_suspend(info)) {
+ dev_info(&pdev->dev, "clock idle support enabled\n");
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
+ }
+
+ pr_debug("initialised ok\n");
+ return 0;
+
+ exit_error:
+ s3c24xx_nand_remove(pdev);
+
+ if (err == 0)
+ err = -EINVAL;
+ return err;
+}
+
+/* PM Support */
+#ifdef CONFIG_PM
+
+static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
+{
+ struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ info->save_sel = readl(info->sel_reg);
+
+ /* For the moment, we must ensure nFCE is high during
+ * the time we are suspended. This really should be
+ * handled by suspending the MTDs we are using, but
+ * that is currently not the case. */
+
+ writel(info->save_sel | info->sel_bit, info->sel_reg);
+
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
+ }
+
+ return 0;
+}
+
+static int s3c24xx_nand_resume(struct platform_device *dev)
+{
+ struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+ unsigned long sel;
+
+ if (info) {
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
+ s3c2410_nand_inithw(info);
+
+ /* Restore the state of the nFCE line. */
+
+ sel = readl(info->sel_reg);
+ sel &= ~info->sel_bit;
+ sel |= info->save_sel & info->sel_bit;
+ writel(sel, info->sel_reg);
+
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
+ }
+
+ return 0;
+}
+
+#else
+#define s3c24xx_nand_suspend NULL
+#define s3c24xx_nand_resume NULL
+#endif
+
+/* driver device registration */
+
+static struct platform_device_id s3c24xx_driver_ids[] = {
+ {
+ .name = "s3c2410-nand",
+ .driver_data = TYPE_S3C2410,
+ }, {
+ .name = "s3c2440-nand",
+ .driver_data = TYPE_S3C2440,
+ }, {
+ .name = "s3c2412-nand",
+ .driver_data = TYPE_S3C2412,
+ }, {
+ .name = "s3c6400-nand",
+ .driver_data = TYPE_S3C2412, /* compatible with 2412 */
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+
+static struct platform_driver s3c24xx_nand_driver = {
+ .probe = s3c24xx_nand_probe,
+ .remove = s3c24xx_nand_remove,
+ .suspend = s3c24xx_nand_suspend,
+ .resume = s3c24xx_nand_resume,
+ .id_table = s3c24xx_driver_ids,
+ .driver = {
+ .name = "s3c24xx-nand",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s3c2410_nand_init(void)
+{
+ printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
+
+ return platform_driver_register(&s3c24xx_nand_driver);
+}
+
+static void __exit s3c2410_nand_exit(void)
+{
+ platform_driver_unregister(&s3c24xx_nand_driver);
+}
+
+module_init(s3c2410_nand_init);
+module_exit(s3c2410_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C24XX MTD NAND driver");