zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/net/phy/Kconfig b/ap/os/linux/linux-3.4.x/drivers/net/phy/Kconfig
new file mode 100644
index 0000000..6f0a635
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/net/phy/Kconfig
@@ -0,0 +1,146 @@
+#
+# PHY Layer Configuration
+#
+
+menuconfig PHYLIB
+ tristate "PHY Device support and infrastructure"
+ depends on !S390
+ depends on NETDEVICES
+ help
+ Ethernet controllers are usually attached to PHY
+ devices. This option provides infrastructure for
+ managing PHY devices.
+
+if PHYLIB
+
+comment "MII PHY device drivers"
+
+config AMD_PHY
+ tristate "Drivers for the AMD PHYs"
+ ---help---
+ Currently supports the am79c874
+
+config MARVELL_PHY
+ tristate "Drivers for Marvell PHYs"
+ ---help---
+ Currently has a driver for the 88E1011S
+
+config DAVICOM_PHY
+ tristate "Drivers for Davicom PHYs"
+ ---help---
+ Currently supports dm9161e and dm9131
+
+config QSEMI_PHY
+ tristate "Drivers for Quality Semiconductor PHYs"
+ ---help---
+ Currently supports the qs6612
+
+config LXT_PHY
+ tristate "Drivers for the Intel LXT PHYs"
+ ---help---
+ Currently supports the lxt970, lxt971
+
+config CICADA_PHY
+ tristate "Drivers for the Cicada PHYs"
+ ---help---
+ Currently supports the cis8204
+
+config VITESSE_PHY
+ tristate "Drivers for the Vitesse PHYs"
+ ---help---
+ Currently supports the vsc8244
+
+config SMSC_PHY
+ tristate "Drivers for SMSC PHYs"
+ ---help---
+ Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+
+config BROADCOM_PHY
+ tristate "Drivers for Broadcom PHYs"
+ ---help---
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
+ and BCM5482 PHYs.
+
+config BCM63XX_PHY
+ tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
+ ---help---
+ Currently supports the 6348 and 6358 PHYs.
+
+config ICPLUS_PHY
+ tristate "Drivers for ICPlus PHYs"
+ ---help---
+ Currently supports the IP175C and IP1001 PHYs.
+
+config REALTEK_PHY
+ tristate "Drivers for Realtek PHYs"
+ ---help---
+ Supports the Realtek 821x PHY.
+
+config NATIONAL_PHY
+ tristate "Drivers for National Semiconductor PHYs"
+ ---help---
+ Currently supports the DP83865 PHY.
+
+config STE10XP
+ tristate "Driver for STMicroelectronics STe10Xp PHYs"
+ ---help---
+ This is the driver for the STe100p and STe101p PHYs.
+
+config LSI_ET1011C_PHY
+ tristate "Driver for LSI ET1011C PHY"
+ ---help---
+ Supports the LSI ET1011C PHY.
+
+config MICREL_PHY
+ tristate "Driver for Micrel PHYs"
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
+config FIXED_PHY
+ bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
+ ---help---
+ Adds the platform "fixed" MDIO Bus to cover the boards that use
+ PHYs that are not connected to the real MDIO bus.
+
+ Currently tested with mpc866ads and mpc8349e-mitx.
+
+config MDIO_BITBANG
+ tristate "Support for bitbanged MDIO buses"
+ help
+ This module implements the MDIO bus protocol in software,
+ for use by low level drivers that export the ability to
+ drive the relevant pins.
+
+ If in doubt, say N.
+
+config MDIO_GPIO
+ tristate "Support for GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG && GENERIC_GPIO
+ ---help---
+ Supports GPIO lib-based MDIO busses.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
+config MDIO_OCTEON
+ tristate "Support for MDIO buses on Octeon SOCs"
+ depends on CPU_CAVIUM_OCTEON
+ default y
+ help
+
+ This module provides a driver for the Octeon MDIO busses.
+ It is required by the Octeon Ethernet device drivers.
+
+ If in doubt, say Y.
+
+endif # PHYLIB
+
+config MICREL_KS8995MA
+ tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
+ depends on SPI
+
+source "drivers/net/phy/icplus/Kconfig"
+source "drivers/net/phy/realtek/Kconfig"
+