zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/net/phy/marvell.c b/ap/os/linux/linux-3.4.x/drivers/net/phy/marvell.c
new file mode 100644
index 0000000..e8b9c53
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/net/phy/marvell.c
@@ -0,0 +1,881 @@
+/*
+ * drivers/net/phy/marvell.c
+ *
+ * Driver for Marvell PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
+#include <linux/of.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_MARVELL_PHY_PAGE 22
+
+#define MII_M1011_IEVENT 0x13
+#define MII_M1011_IEVENT_CLEAR 0x0000
+
+#define MII_M1011_IMASK 0x12
+#define MII_M1011_IMASK_INIT 0x6400
+#define MII_M1011_IMASK_CLEAR 0x0000
+
+#define MII_M1011_PHY_SCR 0x10
+#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
+
+#define MII_M1145_PHY_EXT_CR 0x14
+#define MII_M1145_RGMII_RX_DELAY 0x0080
+#define MII_M1145_RGMII_TX_DELAY 0x0002
+
+#define MII_M1111_PHY_LED_CONTROL 0x18
+#define MII_M1111_PHY_LED_DIRECT 0x4100
+#define MII_M1111_PHY_LED_COMBINE 0x411c
+#define MII_M1111_PHY_EXT_CR 0x14
+#define MII_M1111_RX_DELAY 0x80
+#define MII_M1111_TX_DELAY 0x2
+#define MII_M1111_PHY_EXT_SR 0x1b
+
+#define MII_M1111_HWCFG_MODE_MASK 0xf
+#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
+#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
+#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
+#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
+#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
+
+#define MII_M1111_COPPER 0
+#define MII_M1111_FIBER 1
+
+#define MII_88E1121_PHY_MSCR_PAGE 2
+#define MII_88E1121_PHY_MSCR_REG 21
+#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
+#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
+#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
+
+#define MII_88E1318S_PHY_MSCR1_REG 16
+#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
+
+#define MII_88E1121_PHY_LED_CTRL 16
+#define MII_88E1121_PHY_LED_PAGE 3
+#define MII_88E1121_PHY_LED_DEF 0x0030
+
+#define MII_M1011_PHY_STATUS 0x11
+#define MII_M1011_PHY_STATUS_1000 0x8000
+#define MII_M1011_PHY_STATUS_100 0x4000
+#define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
+#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
+#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_STATUS_LINK 0x0400
+
+
+MODULE_DESCRIPTION("Marvell PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int marvell_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ /* Clear the interrupts by reading the reg */
+ err = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int marvell_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ else
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+
+ return err;
+}
+
+static int marvell_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* The Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x1f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x200c);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x5);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x100);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
+ MII_M1111_PHY_LED_DIRECT);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg != AUTONEG_ENABLE) {
+ int bmcr;
+
+ /*
+ * A write to speed/duplex bits (that is performed by
+ * genphy_config_aneg() call above) must be followed by
+ * a software reset. Otherwise, the write has no effect.
+ */
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF_MDIO
+/*
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ const __be32 *paddr;
+ int len, i, saved_page, current_page, page_changed, ret;
+
+ if (!phydev->dev.of_node)
+ return 0;
+
+ paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+ if (!paddr || len < (4 * sizeof(*paddr)))
+ return 0;
+
+ saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+ if (saved_page < 0)
+ return saved_page;
+ page_changed = 0;
+ current_page = saved_page;
+
+ ret = 0;
+ len /= sizeof(*paddr);
+ for (i = 0; i < len - 3; i += 4) {
+ u16 reg_page = be32_to_cpup(paddr + i);
+ u16 reg = be32_to_cpup(paddr + i + 1);
+ u16 mask = be32_to_cpup(paddr + i + 2);
+ u16 val_bits = be32_to_cpup(paddr + i + 3);
+ int val;
+
+ if (reg_page != current_page) {
+ current_page = reg_page;
+ page_changed = 1;
+ ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+ if (ret < 0)
+ goto err;
+ }
+
+ val = 0;
+ if (mask) {
+ val = phy_read(phydev, reg);
+ if (val < 0) {
+ ret = val;
+ goto err;
+ }
+ val &= mask;
+ }
+ val |= val_bits;
+
+ ret = phy_write(phydev, reg, val);
+ if (ret < 0)
+ goto err;
+
+ }
+err:
+ if (page_changed) {
+ i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+ if (ret == 0)
+ ret = i;
+ }
+ return ret;
+}
+#else
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int m88e1121_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+
+ mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
+ MII_88E1121_PHY_MSCR_DELAY_MASK;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY |
+ MII_88E1121_PHY_MSCR_TX_DELAY);
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ mscr |= MII_88E1121_PHY_MSCR_RX_DELAY;
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ mscr |= MII_88E1121_PHY_MSCR_TX_DELAY;
+
+ err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
+ if (err < 0)
+ return err;
+ }
+
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+ phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+ err = genphy_config_aneg(phydev);
+
+ return err;
+}
+
+static int m88e1318_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
+ mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
+
+ err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+ if (err < 0)
+ return err;
+
+ return m88e1121_config_aneg(phydev);
+}
+
+static int m88e1111_config_init(struct phy_device *phydev)
+{
+ int err;
+ int temp;
+
+ /* Enable Fiber/Copper auto selection */
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ phy_write(phydev, MII_BMCR, temp);
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+
+ if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
+ temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
+ else
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+ temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+
+ /* soft reset */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+ do
+ temp = phy_read(phydev, MII_BMCR);
+ while (temp & BMCR_RESET);
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int m88e1118_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ return 0;
+}
+
+static int m88e1118_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1070);
+ if (err < 0)
+ return err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
+ if (err < 0)
+ return err;
+
+ /* Adjust LED Control */
+ if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+ err = phy_write(phydev, 0x10, 0x1100);
+ else
+ err = phy_write(phydev, 0x10, 0x021e);
+ if (err < 0)
+ return err;
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1048);
+ if (err < 0)
+ return err;
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int m88e1145_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Take care of errata E0 & E1 */
+ err = phy_write(phydev, 0x1d, 0x001b);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x418f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x0016);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0xa2da);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+
+ temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
+ err = phy_write(phydev, 0x1d, 0x0012);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, 0x1e);
+ if (temp < 0)
+ return temp;
+
+ temp &= 0xf03f;
+ temp |= 2 << 9; /* 36 ohm */
+ temp |= 2 << 6; /* 39 ohm */
+
+ err = phy_write(phydev, 0x1e, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x3);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x8000);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* marvell_read_status
+ *
+ * Generic status code does not detect Fiber correctly!
+ * Description:
+ * Check the link, then figure out the current state
+ * by comparing what we advertise with what the link partner
+ * advertises. Start by checking the gigabit possibilities,
+ * then move on to 10/100.
+ */
+static int marvell_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int status = 0;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ status = phy_read(phydev, MII_M1011_PHY_STATUS);
+ if (status < 0)
+ return status;
+
+ lpa = phy_read(phydev, MII_LPA);
+ if (lpa < 0)
+ return lpa;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ lpa &= adv;
+
+ if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ status = status & MII_M1011_PHY_STATUS_SPD_MASK;
+ phydev->pause = phydev->asym_pause = 0;
+
+ switch (status) {
+ case MII_M1011_PHY_STATUS_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MII_M1011_PHY_STATUS_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+
+static int m88e1121_did_interrupt(struct phy_device *phydev)
+{
+ int imask;
+
+ imask = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (imask & MII_M1011_IMASK_INIT)
+ return 1;
+
+ return 0;
+}
+
+static struct phy_driver marvell_drivers[] = {
+ {
+ .phy_id = MARVELL_PHY_ID_88E1101,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1101",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1112,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1112",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1111,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1111",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1118,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1118",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1118_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = {.owner = THIS_MODULE,},
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1121R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1121R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1121_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1318S,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1318S",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1318_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1145,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1145",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1145_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1149R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1149R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1149_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1240,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1240",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
+};
+
+static int __init marvell_init(void)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
+ ret = phy_driver_register(&marvell_drivers[i]);
+
+ if (ret) {
+ while (i-- > 0)
+ phy_driver_unregister(&marvell_drivers[i]);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void __exit marvell_exit(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++)
+ phy_driver_unregister(&marvell_drivers[i]);
+}
+
+module_init(marvell_init);
+module_exit(marvell_exit);
+
+static struct mdio_device_id __maybe_unused marvell_tbl[] = {
+ { 0x01410c60, 0xfffffff0 },
+ { 0x01410c90, 0xfffffff0 },
+ { 0x01410cc0, 0xfffffff0 },
+ { 0x01410e10, 0xfffffff0 },
+ { 0x01410cb0, 0xfffffff0 },
+ { 0x01410cd0, 0xfffffff0 },
+ { 0x01410e50, 0xfffffff0 },
+ { 0x01410e30, 0xfffffff0 },
+ { 0x01410e90, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, marvell_tbl);