zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/net/phy/micrel.c b/ap/os/linux/linux-3.4.x/drivers/net/phy/micrel.c
new file mode 100644
index 0000000..590f902
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/net/phy/micrel.c
@@ -0,0 +1,251 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 1000/100/10 phy from Micrel
+ * ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS 0x1B
+#define KSZPHY_INTCS_JABBER (1 << 15)
+#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14)
+#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13)
+#define KSZPHY_INTCS_PARELLEL (1 << 12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11)
+#define KSZPHY_INTCS_LINK_DOWN (1 << 10)
+#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9)
+#define KSZPHY_INTCS_LINK_UP (1 << 8)
+#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
+ KSZPHY_INTCS_LINK_DOWN)
+
+/* general PHY control reg in vendor specific block. */
+#define MII_KSZPHY_CTRL 0x1F
+/* bitmap of PHY register to set interrupt mode */
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9)
+#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14)
+#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
+#define KSZ8051_RMII_50MHZ_CLK (1 << 7)
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+ /* bit[7..0] int status, which is a read and clear register. */
+ int rc;
+
+ rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+ return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_set_interrupt(struct phy_device *phydev)
+{
+ int temp;
+ temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
+ KSZPHY_INTCS_ALL : 0;
+ return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+ int temp, rc;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+ rc = kszphy_set_interrupt(phydev);
+ return rc < 0 ? rc : 0;
+}
+
+static int ksz9021_config_intr(struct phy_device *phydev)
+{
+ int temp, rc;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+ rc = kszphy_set_interrupt(phydev);
+ return rc < 0 ? rc : 0;
+}
+
+static int ks8737_config_intr(struct phy_device *phydev)
+{
+ int temp, rc;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+ rc = kszphy_set_interrupt(phydev);
+ return rc < 0 ? rc : 0;
+}
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int ks8051_config_init(struct phy_device *phydev)
+{
+ int regval;
+
+ if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+ regval = phy_read(phydev, MII_KSZPHY_CTRL);
+ regval |= KSZ8051_RMII_50MHZ_CLK;
+ phy_write(phydev, MII_KSZPHY_CTRL, regval);
+ }
+
+ return 0;
+}
+
+static struct phy_driver ks8737_driver = {
+ .phy_id = PHY_ID_KS8737,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KS8737",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = ks8737_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8041_driver = {
+ .phy_id = PHY_ID_KS8041,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KS8041",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8051_driver = {
+ .phy_id = PHY_ID_KS8051,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KS8051",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = ks8051_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8001_driver = {
+ .phy_id = PHY_ID_KS8001,
+ .name = "Micrel KS8001 or KS8721",
+ .phy_id_mask = 0x00fffff0,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+ .phy_id = PHY_ID_KSZ9021,
+ .phy_id_mask = 0x000fff10,
+ .name = "Micrel KSZ9021 Gigabit PHY",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = ksz9021_config_intr,
+ .driver = { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&ks8001_driver);
+ if (ret)
+ goto err1;
+
+ ret = phy_driver_register(&ksz9021_driver);
+ if (ret)
+ goto err2;
+
+ ret = phy_driver_register(&ks8737_driver);
+ if (ret)
+ goto err3;
+ ret = phy_driver_register(&ks8041_driver);
+ if (ret)
+ goto err4;
+ ret = phy_driver_register(&ks8051_driver);
+ if (ret)
+ goto err5;
+
+ return 0;
+
+err5:
+ phy_driver_unregister(&ks8041_driver);
+err4:
+ phy_driver_unregister(&ks8737_driver);
+err3:
+ phy_driver_unregister(&ksz9021_driver);
+err2:
+ phy_driver_unregister(&ks8001_driver);
+err1:
+ return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+ phy_driver_unregister(&ks8001_driver);
+ phy_driver_unregister(&ks8737_driver);
+ phy_driver_unregister(&ksz9021_driver);
+ phy_driver_unregister(&ks8041_driver);
+ phy_driver_unregister(&ks8051_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused micrel_tbl[] = {
+ { PHY_ID_KSZ9021, 0x000fff10 },
+ { PHY_ID_KS8001, 0x00fffff0 },
+ { PHY_ID_KS8737, 0x00fffff0 },
+ { PHY_ID_KS8041, 0x00fffff0 },
+ { PHY_ID_KS8051, 0x00fffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);