zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/net/wireless/Kconfig b/ap/os/linux/linux-3.4.x/drivers/net/wireless/Kconfig
new file mode 100644
index 0000000..3e608fb
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/net/wireless/Kconfig
@@ -0,0 +1,301 @@
+#
+# Wireless LAN device configuration
+#
+
+menuconfig WLAN
+ bool "Wireless LAN"
+ depends on !S390
+ depends on NET
+ select WIRELESS
+ default y
+ ---help---
+ This section contains all the pre 802.11 and 802.11 wireless
+ device drivers. For a complete list of drivers and documentation
+ on them refer to the wireless wiki:
+
+ http://wireless.kernel.org/en/users/Drivers
+
+if WLAN
+
+config PCMCIA_RAYCS
+ tristate "Aviator/Raytheon 2.4GHz wireless support"
+ depends on PCMCIA
+ select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
+ ---help---
+ Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
+ (PC-card) wireless Ethernet networking card to your computer.
+ Please read the file <file:Documentation/networking/ray_cs.txt> for
+ details.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ray_cs. If unsure, say N.
+
+config LIBERTAS_THINFIRM
+ tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
+ depends on MAC80211
+ select FW_LOADER
+ ---help---
+ A library for Marvell Libertas 8xxx devices using thinfirm.
+
+config LIBERTAS_THINFIRM_DEBUG
+ bool "Enable full debugging output in the Libertas thin firmware module."
+ depends on LIBERTAS_THINFIRM
+ ---help---
+ Debugging support.
+
+config LIBERTAS_THINFIRM_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
+ depends on LIBERTAS_THINFIRM && USB
+ ---help---
+ A driver for Marvell Libertas 8388 USB devices using thinfirm.
+
+config AIRO
+ tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
+ depends on ISA_DMA_API && (PCI || BROKEN)
+ select WIRELESS_EXT
+ select CRYPTO
+ select WEXT_SPY
+ select WEXT_PRIV
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet ISA and
+ PCI 802.11 wireless cards.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+ The driver can be compiled as a module and will be named "airo".
+
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on (PCI || PCMCIA)
+ select WIRELESS_EXT
+ select WEXT_PRIV
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on ATMEL && PCMCIA
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ ---help---
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
+config AT76C50X_USB
+ tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+ depends on MAC80211 && USB
+ select FW_LOADER
+ ---help---
+ Enable support for USB Wireless devices using Atmel at76c503,
+ at76c505 or at76c505a chips.
+
+config AIRO_CS
+ tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
+ depends on PCMCIA && (BROKEN || !M32R)
+ select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
+ select CRYPTO
+ select CRYPTO_AES
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet PCMCIA
+ 802.11 wireless cards. This driver is the same as the Aironet
+ driver part of the Linux Pcmcia package.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+ supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
+ 802.11b cards.
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+config PCMCIA_WL3501
+ tristate "Planet WL3501 PCMCIA cards"
+ depends on EXPERIMENTAL && PCMCIA
+ select WIRELESS_EXT
+ select WEXT_SPY
+ help
+ A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+ It has basic support for Linux wireless extensions and initial
+ micro support for ethtool.
+
+config PRISM54
+ tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
+ depends on PCI && EXPERIMENTAL
+ select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
+ select FW_LOADER
+ ---help---
+ This enables support for FullMAC PCI/Cardbus prism54 devices. This
+ driver is now deprecated in favor for the SoftMAC driver, p54pci.
+ p54pci supports FullMAC PCI/Cardbus devices as well. For details on
+ the scheduled removal of this driver on the kernel see the feature
+ removal schedule:
+
+ Documentation/feature-removal-schedule.txt
+
+ For more information refer to the p54 wiki:
+
+ http://wireless.kernel.org/en/users/Drivers/p54
+
+ Note: You need a motherboard with DMA support to use any of these cards
+
+ When built as module you get the module prism54
+
+config USB_ZD1201
+ tristate "USB ZD1201 based Wireless device support"
+ depends on USB
+ select WIRELESS_EXT
+ select WEXT_PRIV
+ select FW_LOADER
+ ---help---
+ Say Y if you want to use wireless LAN adapters based on the ZyDAS
+ ZD1201 chip.
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on wlan0.
+
+ The zd1201 device requires external firmware to be loaded.
+ This can be found at http://linux-lc100020.sourceforge.net/
+
+ To compile this driver as a module, choose M here: the
+ module will be called zd1201.
+
+config USB_NET_RNDIS_WLAN
+ tristate "Wireless RNDIS USB support"
+ depends on USB && EXPERIMENTAL
+ depends on CFG80211
+ select USB_USBNET
+ select USB_NET_CDCETHER
+ select USB_NET_RNDIS_HOST
+ ---help---
+ This is a driver for wireless RNDIS devices.
+ These are USB based adapters found in devices such as:
+
+ Buffalo WLI-U2-KG125S
+ U.S. Robotics USR5421
+ Belkin F5D7051
+ Linksys WUSB54GSv2
+ Linksys WUSB54GSC
+ Asus WL169gE
+ Eminent EM4045
+ BT Voyager 1055
+ Linksys WUSB54GSv1
+ U.S. Robotics USR5420
+ BUFFALO WLI-USB-G54
+
+ All of these devices are based on Broadcom 4320 chip which is the
+ only wireless RNDIS chip known to date.
+
+ If you choose to build a module, it'll be called rndis_wlan.
+
+source "drivers/net/wireless/rtl818x/Kconfig"
+
+config ADM8211
+ tristate "ADMtek ADM8211 support"
+ depends on MAC80211 && PCI && EXPERIMENTAL
+ select CRC32
+ select EEPROM_93CX6
+ ---help---
+ This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+ These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+ Xterasys Cardbus XN-2411b
+ Blitz NetWave Point PC
+ TrendNet 221pc
+ Belkin F5D6001
+ SMC 2635W
+ Linksys WPC11 v1
+ Fiberline FL-WL-200X
+ 3com Office Connect (3CRSHPW796)
+ Corega WLPCIB-11
+ SMC 2602W V2 EU
+ D-Link DWL-520 Revision C
+
+ However, some of these cards have been replaced with other chips
+ like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+ the Ralink RT2400 (SMC2635W) without a model number change.
+
+ Thanks to Infineon-ADMtek for their support of this driver.
+
+config MAC80211_HWSIM
+ tristate "Simulated radio testing tool for mac80211"
+ depends on MAC80211
+ ---help---
+ This driver is a developer testing tool that can be used to test
+ IEEE 802.11 networking stack (mac80211) functionality. This is not
+ needed for normal wireless LAN usage and is only for testing. See
+ Documentation/networking/mac80211_hwsim for more information on how
+ to use this tool.
+
+ To compile this driver as a module, choose M here: the module will be
+ called mac80211_hwsim. If unsure, say N.
+
+config MWL8K
+ tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
+ depends on MAC80211 && PCI && EXPERIMENTAL
+ ---help---
+ This driver supports Marvell TOPDOG 802.11 wireless cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mwl8k. If unsure, say N.
+
+config WIFI_CONTROL_FUNC
+ bool "Enable WiFi control function abstraction"
+ help
+ Enables Power/Reset/Carddetect function abstraction
+
+source "drivers/net/wireless/ath/Kconfig"
+source "drivers/net/wireless/b43/Kconfig"
+source "drivers/net/wireless/b43legacy/Kconfig"
+source "drivers/net/wireless/rtl8192cd_92es/Kconfig"
+source "drivers/net/wireless/rtl8192cd_92es_wpa2/Kconfig"
+source "drivers/net/wireless/brcm80211/Kconfig"
+source "drivers/net/wireless/hostap/Kconfig"
+source "drivers/net/wireless/ipw2x00/Kconfig"
+source "drivers/net/wireless/iwlwifi/Kconfig"
+source "drivers/net/wireless/iwlegacy/Kconfig"
+source "drivers/net/wireless/iwmc3200wifi/Kconfig"
+source "drivers/net/wireless/libertas/Kconfig"
+source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/p54/Kconfig"
+source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/rtlwifi/Kconfig"
+source "drivers/net/wireless/wl1251/Kconfig"
+source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/zd1211rw/Kconfig"
+source "drivers/net/wireless/mwifiex/Kconfig"
+source "drivers/net/wireless/rdaw5995/Kconfig"
+source "drivers/net/wireless/esp8089/Kconfig"
+source "drivers/net/wireless/xradio/Kconfig"
+source "drivers/net/wireless/ssv6x5x/Kconfig"
+source "drivers/net/wireless/aic8800/Kconfig"
+endif # WLAN