zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/power/max8903_charger.c b/ap/os/linux/linux-3.4.x/drivers/power/max8903_charger.c
new file mode 100644
index 0000000..3e23f43
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/power/max8903_charger.c
@@ -0,0 +1,382 @@
+/*
+ * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/power/max8903_charger.h>
+
+struct max8903_data {
+ struct max8903_pdata pdata;
+ struct device *dev;
+ struct power_supply psy;
+ bool fault;
+ bool usb_in;
+ bool ta_in;
+};
+
+static enum power_supply_property max8903_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS, /* Charger status output */
+ POWER_SUPPLY_PROP_ONLINE, /* External power source */
+ POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
+};
+
+static int max8903_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8903_data *data = container_of(psy,
+ struct max8903_data, psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ if (data->pdata.chg) {
+ if (gpio_get_value(data->pdata.chg) == 0)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (data->usb_in || data->ta_in)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = 0;
+ if (data->usb_in || data->ta_in)
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ if (data->fault)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static irqreturn_t max8903_dcin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = &data->pdata;
+ bool ta_in;
+ enum power_supply_type old_type;
+
+ ta_in = gpio_get_value(pdata->dok) ? false : true;
+
+ if (ta_in == data->ta_in)
+ return IRQ_HANDLED;
+
+ data->ta_in = ta_in;
+
+ /* Set Current-Limit-Mode 1:DC 0:USB */
+ if (pdata->dcm)
+ gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (pdata->cen)
+ gpio_set_value(pdata->cen, ta_in ? 0 :
+ (data->usb_in ? 0 : 1));
+
+ dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy.type;
+
+ if (data->ta_in)
+ data->psy.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy.type)
+ power_supply_changed(&data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_usbin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = &data->pdata;
+ bool usb_in;
+ enum power_supply_type old_type;
+
+ usb_in = gpio_get_value(pdata->uok) ? false : true;
+
+ if (usb_in == data->usb_in)
+ return IRQ_HANDLED;
+
+ data->usb_in = usb_in;
+
+ /* Do not touch Current-Limit-Mode */
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (pdata->cen)
+ gpio_set_value(pdata->cen, usb_in ? 0 :
+ (data->ta_in ? 0 : 1));
+
+ dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy.type;
+
+ if (data->ta_in)
+ data->psy.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy.type)
+ power_supply_changed(&data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_fault(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = &data->pdata;
+ bool fault;
+
+ fault = gpio_get_value(pdata->flt) ? false : true;
+
+ if (fault == data->fault)
+ return IRQ_HANDLED;
+
+ data->fault = fault;
+
+ if (fault)
+ dev_err(data->dev, "Charger suffers a fault and stops.\n");
+ else
+ dev_err(data->dev, "Charger recovered from a fault.\n");
+
+ return IRQ_HANDLED;
+}
+
+static __devinit int max8903_probe(struct platform_device *pdev)
+{
+ struct max8903_data *data;
+ struct device *dev = &pdev->dev;
+ struct max8903_pdata *pdata = pdev->dev.platform_data;
+ int ret = 0;
+ int gpio;
+ int ta_in = 0;
+ int usb_in = 0;
+
+ data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(dev, "Cannot allocate memory.\n");
+ return -ENOMEM;
+ }
+ memcpy(&data->pdata, pdata, sizeof(struct max8903_pdata));
+ data->dev = dev;
+ platform_set_drvdata(pdev, data);
+
+ if (pdata->dc_valid == false && pdata->usb_valid == false) {
+ dev_err(dev, "No valid power sources.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (pdata->dc_valid) {
+ if (pdata->dok && gpio_is_valid(pdata->dok) &&
+ pdata->dcm && gpio_is_valid(pdata->dcm)) {
+ gpio = pdata->dok; /* PULL_UPed Interrupt */
+ ta_in = gpio_get_value(gpio) ? 0 : 1;
+
+ gpio = pdata->dcm; /* Output */
+ gpio_set_value(gpio, ta_in);
+ } else {
+ dev_err(dev, "When DC is wired, DOK and DCM should"
+ " be wired as well.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ } else {
+ if (pdata->dcm) {
+ if (gpio_is_valid(pdata->dcm))
+ gpio_set_value(pdata->dcm, 0);
+ else {
+ dev_err(dev, "Invalid pin: dcm.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+ }
+
+ if (pdata->usb_valid) {
+ if (pdata->uok && gpio_is_valid(pdata->uok)) {
+ gpio = pdata->uok;
+ usb_in = gpio_get_value(gpio) ? 0 : 1;
+ } else {
+ dev_err(dev, "When USB is wired, UOK should be wired."
+ "as well.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->cen) {
+ if (gpio_is_valid(pdata->cen)) {
+ gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
+ } else {
+ dev_err(dev, "Invalid pin: cen.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->chg) {
+ if (!gpio_is_valid(pdata->chg)) {
+ dev_err(dev, "Invalid pin: chg.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->flt) {
+ if (!gpio_is_valid(pdata->flt)) {
+ dev_err(dev, "Invalid pin: flt.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (pdata->usus) {
+ if (!gpio_is_valid(pdata->usus)) {
+ dev_err(dev, "Invalid pin: usus.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ data->fault = false;
+ data->ta_in = ta_in;
+ data->usb_in = usb_in;
+
+ data->psy.name = "max8903_charger";
+ data->psy.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+ ((usb_in) ? POWER_SUPPLY_TYPE_USB :
+ POWER_SUPPLY_TYPE_BATTERY);
+ data->psy.get_property = max8903_get_property;
+ data->psy.properties = max8903_charger_props;
+ data->psy.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+ ret = power_supply_register(dev, &data->psy);
+ if (ret) {
+ dev_err(dev, "failed: power supply register.\n");
+ goto err;
+ }
+
+ if (pdata->dc_valid) {
+ ret = request_threaded_irq(gpio_to_irq(pdata->dok),
+ NULL, max8903_dcin,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "MAX8903 DC IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for DC (%d)\n",
+ gpio_to_irq(pdata->dok), ret);
+ goto err_psy;
+ }
+ }
+
+ if (pdata->usb_valid) {
+ ret = request_threaded_irq(gpio_to_irq(pdata->uok),
+ NULL, max8903_usbin,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "MAX8903 USB IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for USB (%d)\n",
+ gpio_to_irq(pdata->uok), ret);
+ goto err_dc_irq;
+ }
+ }
+
+ if (pdata->flt) {
+ ret = request_threaded_irq(gpio_to_irq(pdata->flt),
+ NULL, max8903_fault,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "MAX8903 Fault", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
+ gpio_to_irq(pdata->flt), ret);
+ goto err_usb_irq;
+ }
+ }
+
+ return 0;
+
+err_usb_irq:
+ if (pdata->usb_valid)
+ free_irq(gpio_to_irq(pdata->uok), data);
+err_dc_irq:
+ if (pdata->dc_valid)
+ free_irq(gpio_to_irq(pdata->dok), data);
+err_psy:
+ power_supply_unregister(&data->psy);
+err:
+ kfree(data);
+ return ret;
+}
+
+static __devexit int max8903_remove(struct platform_device *pdev)
+{
+ struct max8903_data *data = platform_get_drvdata(pdev);
+
+ if (data) {
+ struct max8903_pdata *pdata = &data->pdata;
+
+ if (pdata->flt)
+ free_irq(gpio_to_irq(pdata->flt), data);
+ if (pdata->usb_valid)
+ free_irq(gpio_to_irq(pdata->uok), data);
+ if (pdata->dc_valid)
+ free_irq(gpio_to_irq(pdata->dok), data);
+ power_supply_unregister(&data->psy);
+ kfree(data);
+ }
+
+ return 0;
+}
+
+static struct platform_driver max8903_driver = {
+ .probe = max8903_probe,
+ .remove = __devexit_p(max8903_remove),
+ .driver = {
+ .name = "max8903-charger",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(max8903_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MAX8903 Charger Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_ALIAS("platform:max8903-charger");