zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/regulator/fixed.c b/ap/os/linux/linux-3.4.x/drivers/regulator/fixed.c
new file mode 100644
index 0000000..40f3803
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/regulator/fixed.c
@@ -0,0 +1,325 @@
+/*
+ * fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
+
+struct fixed_voltage_data {
+ struct regulator_desc desc;
+ struct regulator_dev *dev;
+ int microvolts;
+ int gpio;
+ unsigned startup_delay;
+ bool enable_high;
+ bool is_enabled;
+};
+
+
+/**
+ * of_get_fixed_voltage_config - extract fixed_voltage_config structure info
+ * @dev: device requesting for fixed_voltage_config
+ *
+ * Populates fixed_voltage_config structure by extracting data from device
+ * tree node, returns a pointer to the populated structure of NULL if memory
+ * alloc fails.
+ */
+static struct fixed_voltage_config *
+of_get_fixed_voltage_config(struct device *dev)
+{
+ struct fixed_voltage_config *config;
+ struct device_node *np = dev->of_node;
+ const __be32 *delay;
+ struct regulator_init_data *init_data;
+
+ config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config),
+ GFP_KERNEL);
+ if (!config)
+ return NULL;
+
+ config->init_data = of_get_regulator_init_data(dev, dev->of_node);
+ if (!config->init_data)
+ return NULL;
+
+ init_data = config->init_data;
+ init_data->constraints.apply_uV = 0;
+
+ config->supply_name = init_data->constraints.name;
+ if (init_data->constraints.min_uV == init_data->constraints.max_uV) {
+ config->microvolts = init_data->constraints.min_uV;
+ } else {
+ dev_err(dev,
+ "Fixed regulator specified with variable voltages\n");
+ return NULL;
+ }
+
+ if (init_data->constraints.boot_on)
+ config->enabled_at_boot = true;
+
+ config->gpio = of_get_named_gpio(np, "gpio", 0);
+ delay = of_get_property(np, "startup-delay-us", NULL);
+ if (delay)
+ config->startup_delay = be32_to_cpu(*delay);
+
+ if (of_find_property(np, "enable-active-high", NULL))
+ config->enable_high = true;
+
+ return config;
+}
+
+static int fixed_voltage_is_enabled(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ return data->is_enabled;
+}
+
+static int fixed_voltage_enable(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (gpio_is_valid(data->gpio)) {
+ gpio_set_value_cansleep(data->gpio, data->enable_high);
+ data->is_enabled = true;
+ }
+
+ return 0;
+}
+
+static int fixed_voltage_disable(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (gpio_is_valid(data->gpio)) {
+ gpio_set_value_cansleep(data->gpio, !data->enable_high);
+ data->is_enabled = false;
+ }
+
+ return 0;
+}
+
+static int fixed_voltage_enable_time(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ return data->startup_delay;
+}
+
+static int fixed_voltage_get_voltage(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (data->microvolts)
+ return data->microvolts;
+ else
+ return -EINVAL;
+}
+
+static int fixed_voltage_list_voltage(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ if (selector != 0)
+ return -EINVAL;
+
+ return data->microvolts;
+}
+
+static struct regulator_ops fixed_voltage_ops = {
+ .is_enabled = fixed_voltage_is_enabled,
+ .enable = fixed_voltage_enable,
+ .disable = fixed_voltage_disable,
+ .enable_time = fixed_voltage_enable_time,
+ .get_voltage = fixed_voltage_get_voltage,
+ .list_voltage = fixed_voltage_list_voltage,
+};
+
+static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
+{
+ struct fixed_voltage_config *config;
+ struct fixed_voltage_data *drvdata;
+ int ret;
+
+ if (pdev->dev.of_node)
+ config = of_get_fixed_voltage_config(&pdev->dev);
+ else
+ config = pdev->dev.platform_data;
+
+ if (!config)
+ return -ENOMEM;
+
+ drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+ if (drvdata == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate device data\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+ if (drvdata->desc.name == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate supply name\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ drvdata->desc.type = REGULATOR_VOLTAGE;
+ drvdata->desc.owner = THIS_MODULE;
+ drvdata->desc.ops = &fixed_voltage_ops;
+
+ if (config->microvolts)
+ drvdata->desc.n_voltages = 1;
+
+ drvdata->microvolts = config->microvolts;
+ drvdata->gpio = config->gpio;
+ drvdata->startup_delay = config->startup_delay;
+
+ if (gpio_is_valid(config->gpio)) {
+ drvdata->enable_high = config->enable_high;
+
+ /* FIXME: Remove below print warning
+ *
+ * config->gpio must be set to -EINVAL by platform code if
+ * GPIO control is not required. However, early adopters
+ * not requiring GPIO control may forget to initialize
+ * config->gpio to -EINVAL. This will cause GPIO 0 to be used
+ * for GPIO control.
+ *
+ * This warning will be removed once there are a couple of users
+ * for this driver.
+ */
+ if (!config->gpio)
+ dev_warn(&pdev->dev,
+ "using GPIO 0 for regulator enable control\n");
+
+ ret = gpio_request(config->gpio, config->supply_name);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator enable GPIO %d: %d\n",
+ config->gpio, ret);
+ goto err_name;
+ }
+
+ /* set output direction without changing state
+ * to prevent glitch
+ */
+ drvdata->is_enabled = config->enabled_at_boot;
+ ret = drvdata->is_enabled ?
+ config->enable_high : !config->enable_high;
+
+ ret = gpio_direction_output(config->gpio, ret);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not configure regulator enable GPIO %d direction: %d\n",
+ config->gpio, ret);
+ goto err_gpio;
+ }
+
+ } else {
+ /* Regulator without GPIO control is considered
+ * always enabled
+ */
+ drvdata->is_enabled = true;
+ }
+
+ drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
+ config->init_data, drvdata,
+ pdev->dev.of_node);
+ if (IS_ERR(drvdata->dev)) {
+ ret = PTR_ERR(drvdata->dev);
+ dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+ goto err_gpio;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
+ drvdata->microvolts);
+
+ return 0;
+
+err_gpio:
+ if (gpio_is_valid(config->gpio))
+ gpio_free(config->gpio);
+err_name:
+ kfree(drvdata->desc.name);
+err:
+ kfree(drvdata);
+ return ret;
+}
+
+static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
+{
+ struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
+
+ regulator_unregister(drvdata->dev);
+ if (gpio_is_valid(drvdata->gpio))
+ gpio_free(drvdata->gpio);
+ kfree(drvdata->desc.name);
+ kfree(drvdata);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id fixed_of_match[] __devinitconst = {
+ { .compatible = "regulator-fixed", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, fixed_of_match);
+#else
+#define fixed_of_match NULL
+#endif
+
+static struct platform_driver regulator_fixed_voltage_driver = {
+ .probe = reg_fixed_voltage_probe,
+ .remove = __devexit_p(reg_fixed_voltage_remove),
+ .driver = {
+ .name = "reg-fixed-voltage",
+ .owner = THIS_MODULE,
+ .of_match_table = fixed_of_match,
+ },
+};
+
+static int __init regulator_fixed_voltage_init(void)
+{
+ return platform_driver_register(®ulator_fixed_voltage_driver);
+}
+subsys_initcall(regulator_fixed_voltage_init);
+
+static void __exit regulator_fixed_voltage_exit(void)
+{
+ platform_driver_unregister(®ulator_fixed_voltage_driver);
+}
+module_exit(regulator_fixed_voltage_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Fixed voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:reg-fixed-voltage");