zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/s390/net/Kconfig b/ap/os/linux/linux-3.4.x/drivers/s390/net/Kconfig
new file mode 100644
index 0000000..9b66d2d
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/s390/net/Kconfig
@@ -0,0 +1,112 @@
+menu "S/390 network device drivers"
+ depends on NETDEVICES && S390
+
+config LCS
+ def_tristate m
+ prompt "Lan Channel Station Interface"
+ depends on CCW && NETDEVICES && (ETHERNET || TR || FDDI)
+ help
+ Select this option if you want to use LCS networking on IBM System z.
+ This device driver supports Token Ring (IEEE 802.5),
+ FDDI (IEEE 802.7) and Ethernet.
+ To compile as a module, choose M. The module name is lcs.
+ If you do not know what it is, it's safe to choose Y.
+
+config CTCM
+ def_tristate m
+ prompt "CTC and MPC SNA device support"
+ depends on CCW && NETDEVICES
+ help
+ Select this option if you want to use channel-to-channel
+ point-to-point networking on IBM System z.
+ This device driver supports real CTC coupling using ESCON.
+ It also supports virtual CTCs when running under VM.
+ This driver also supports channel-to-channel MPC SNA devices.
+ MPC is an SNA protocol device used by Communication Server for Linux.
+ To compile as a module, choose M. The module name is ctcm.
+ To compile into the kernel, choose Y.
+ If you do not need any channel-to-channel connection, choose N.
+
+config NETIUCV
+ def_tristate m
+ prompt "IUCV network device support (VM only)"
+ depends on IUCV && NETDEVICES
+ help
+ Select this option if you want to use inter-user communication
+ vehicle networking under VM or VIF. It enables a fast communication
+ link between VM guests. Using ifconfig a point-to-point connection
+ can be established to the Linux on IBM System z
+ running on the other VM guest. To compile as a module, choose M.
+ The module name is netiucv. If unsure, choose Y.
+
+config SMSGIUCV
+ def_tristate m
+ prompt "IUCV special message support (VM only)"
+ depends on IUCV
+ help
+ Select this option if you want to be able to receive SMSG messages
+ from other VM guest systems.
+
+config SMSGIUCV_EVENT
+ def_tristate m
+ prompt "Deliver IUCV special messages as uevents (VM only)"
+ depends on SMSGIUCV
+ help
+ Select this option to deliver CP special messages (SMSGs) as
+ uevents. The driver handles only those special messages that
+ start with "APP".
+
+ To compile as a module, choose M. The module name is "smsgiucv_app".
+
+config CLAW
+ def_tristate m
+ prompt "CLAW device support"
+ depends on CCW && NETDEVICES
+ help
+ This driver supports channel attached CLAW devices.
+ CLAW is Common Link Access for Workstation. Common devices
+ that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
+ To compile as a module, choose M. The module name is claw.
+ To compile into the kernel, choose Y.
+
+config QETH
+ def_tristate y
+ prompt "Gigabit Ethernet device support"
+ depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
+ help
+ This driver supports the IBM System z OSA Express adapters
+ in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
+ interfaces in QDIO and HIPER mode.
+
+ For details please refer to the documentation provided by IBM at
+ <http://www.ibm.com/developerworks/linux/linux390>
+
+ To compile this driver as a module, choose M.
+ The module name is qeth.
+
+config QETH_L2
+ def_tristate y
+ prompt "qeth layer 2 device support"
+ depends on QETH
+ help
+ Select this option to be able to run qeth devices in layer 2 mode.
+ To compile as a module, choose M. The module name is qeth_l2.
+ If unsure, choose y.
+
+config QETH_L3
+ def_tristate y
+ prompt "qeth layer 3 device support"
+ depends on QETH
+ help
+ Select this option to be able to run qeth devices in layer 3 mode.
+ To compile as a module choose M. The module name is qeth_l3.
+ If unsure, choose Y.
+
+config QETH_IPV6
+ def_bool y if (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
+
+config CCWGROUP
+ tristate
+ default (LCS || CTCM || QETH || CLAW)
+
+endmenu