zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/scsi/lpfc/lpfc.h b/ap/os/linux/linux-3.4.x/drivers/scsi/lpfc/lpfc.h
new file mode 100644
index 0000000..3a1ffdd
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/scsi/lpfc/lpfc.h
@@ -0,0 +1,1004 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2012 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+#include <scsi/scsi_host.h>
+
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
+#define CONFIG_SCSI_LPFC_DEBUG_FS
+#endif
+
+struct lpfc_sli2_slim;
+
+#define LPFC_PCI_DEV_LP 0x1
+#define LPFC_PCI_DEV_OC 0x2
+
+#define LPFC_SLI_REV2 2
+#define LPFC_SLI_REV3 3
+#define LPFC_SLI_REV4 4
+
+#define LPFC_MAX_TARGET 4096 /* max number of targets supported */
+#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
+ requests */
+#define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
+ the NameServer before giving up. */
+#define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */
+#define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
+#define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128 /* sg element count per scsi
+ cmnd for menlo needs nearly twice as for firmware
+ downloads using bsg */
+#define LPFC_DEFAULT_PROT_SG_SEG_CNT 4096 /* sg protection elements count */
+#define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */
+#define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */
+#define LPFC_MAX_PROT_SG_SEG_CNT 4096 /* prot sg element count per scsi cmd*/
+#define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
+#define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */
+#define LPFC_VNAME_LEN 100 /* vport symbolic name length */
+#define LPFC_TGTQ_INTERVAL 40000 /* Min amount of time between tgt
+ queue depth change in millisecs */
+#define LPFC_TGTQ_RAMPUP_PCENT 5 /* Target queue rampup in percentage */
+#define LPFC_MIN_TGT_QDEPTH 10
+#define LPFC_MAX_TGT_QDEPTH 0xFFFF
+
+#define LPFC_MAX_BUCKET_COUNT 20 /* Maximum no. of buckets for stat data
+ collection. */
+/*
+ * Following time intervals are used of adjusting SCSI device
+ * queue depths when there are driver resource error or Firmware
+ * resource error.
+ */
+#define QUEUE_RAMP_DOWN_INTERVAL (1 * HZ) /* 1 Second */
+#define QUEUE_RAMP_UP_INTERVAL (300 * HZ) /* 5 minutes */
+
+/* Number of exchanges reserved for discovery to complete */
+#define LPFC_DISC_IOCB_BUFF_COUNT 20
+
+#define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */
+#define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */
+
+/* Error Attention event polling interval */
+#define LPFC_ERATT_POLL_INTERVAL 5 /* EATT poll interval in seconds */
+
+/* Define macros for 64 bit support */
+#define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr)))
+#define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
+#define getPaddr(high, low) ((dma_addr_t)( \
+ (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
+/* Provide maximum configuration definitions. */
+#define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
+#define FC_MAX_ADPTMSG 64
+
+#define MAX_HBAEVT 32
+
+/* Number of MSI-X vectors the driver uses */
+#define LPFC_MSIX_VECTORS 2
+
+/* lpfc wait event data ready flag */
+#define LPFC_DATA_READY (1<<0)
+
+enum lpfc_polling_flags {
+ ENABLE_FCP_RING_POLLING = 0x1,
+ DISABLE_FCP_RING_INT = 0x2
+};
+
+/* Provide DMA memory definitions the driver uses per port instance. */
+struct lpfc_dmabuf {
+ struct list_head list;
+ void *virt; /* virtual address ptr */
+ dma_addr_t phys; /* mapped address */
+ uint32_t buffer_tag; /* used for tagged queue ring */
+};
+
+struct lpfc_dma_pool {
+ struct lpfc_dmabuf *elements;
+ uint32_t max_count;
+ uint32_t current_count;
+};
+
+struct hbq_dmabuf {
+ struct lpfc_dmabuf hbuf;
+ struct lpfc_dmabuf dbuf;
+ uint32_t size;
+ uint32_t tag;
+ struct lpfc_cq_event cq_event;
+ unsigned long time_stamp;
+};
+
+/* Priority bit. Set value to exceed low water mark in lpfc_mem. */
+#define MEM_PRI 0x100
+
+
+/****************************************************************************/
+/* Device VPD save area */
+/****************************************************************************/
+typedef struct lpfc_vpd {
+ uint32_t status; /* vpd status value */
+ uint32_t length; /* number of bytes actually returned */
+ struct {
+ uint32_t rsvd1; /* Revision numbers */
+ uint32_t biuRev;
+ uint32_t smRev;
+ uint32_t smFwRev;
+ uint32_t endecRev;
+ uint16_t rBit;
+ uint8_t fcphHigh;
+ uint8_t fcphLow;
+ uint8_t feaLevelHigh;
+ uint8_t feaLevelLow;
+ uint32_t postKernRev;
+ uint32_t opFwRev;
+ uint8_t opFwName[16];
+ uint32_t sli1FwRev;
+ uint8_t sli1FwName[16];
+ uint32_t sli2FwRev;
+ uint8_t sli2FwName[16];
+ } rev;
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint32_t rsvd3 :19; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cbg : 1; /* Configure BlockGuard */
+ uint32_t cmv : 1; /* Configure Max VPIs */
+ uint32_t ccrp : 1; /* Config Command Ring Polling */
+ uint32_t csah : 1; /* Configure Synchronous Abort Handling */
+ uint32_t chbs : 1; /* Cofigure Host Backing store */
+ uint32_t cinb : 1; /* Enable Interrupt Notification Block */
+ uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
+ uint32_t cmx : 1; /* Configure Max XRIs */
+ uint32_t cmr : 1; /* Configure Max RPIs */
+#else /* __LITTLE_ENDIAN */
+ uint32_t cmr : 1; /* Configure Max RPIs */
+ uint32_t cmx : 1; /* Configure Max XRIs */
+ uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
+ uint32_t cinb : 1; /* Enable Interrupt Notification Block */
+ uint32_t chbs : 1; /* Cofigure Host Backing store */
+ uint32_t csah : 1; /* Configure Synchronous Abort Handling */
+ uint32_t ccrp : 1; /* Config Command Ring Polling */
+ uint32_t cmv : 1; /* Configure Max VPIs */
+ uint32_t cbg : 1; /* Configure BlockGuard */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd3 :19; /* Reserved */
+#endif
+ } sli3Feat;
+} lpfc_vpd_t;
+
+struct lpfc_scsi_buf;
+
+
+/*
+ * lpfc stat counters
+ */
+struct lpfc_stats {
+ /* Statistics for ELS commands */
+ uint32_t elsLogiCol;
+ uint32_t elsRetryExceeded;
+ uint32_t elsXmitRetry;
+ uint32_t elsDelayRetry;
+ uint32_t elsRcvDrop;
+ uint32_t elsRcvFrame;
+ uint32_t elsRcvRSCN;
+ uint32_t elsRcvRNID;
+ uint32_t elsRcvFARP;
+ uint32_t elsRcvFARPR;
+ uint32_t elsRcvFLOGI;
+ uint32_t elsRcvPLOGI;
+ uint32_t elsRcvADISC;
+ uint32_t elsRcvPDISC;
+ uint32_t elsRcvFAN;
+ uint32_t elsRcvLOGO;
+ uint32_t elsRcvPRLO;
+ uint32_t elsRcvPRLI;
+ uint32_t elsRcvLIRR;
+ uint32_t elsRcvRLS;
+ uint32_t elsRcvRPS;
+ uint32_t elsRcvRPL;
+ uint32_t elsRcvRRQ;
+ uint32_t elsRcvRTV;
+ uint32_t elsRcvECHO;
+ uint32_t elsXmitFLOGI;
+ uint32_t elsXmitFDISC;
+ uint32_t elsXmitPLOGI;
+ uint32_t elsXmitPRLI;
+ uint32_t elsXmitADISC;
+ uint32_t elsXmitLOGO;
+ uint32_t elsXmitSCR;
+ uint32_t elsXmitRNID;
+ uint32_t elsXmitFARP;
+ uint32_t elsXmitFARPR;
+ uint32_t elsXmitACC;
+ uint32_t elsXmitLSRJT;
+
+ uint32_t frameRcvBcast;
+ uint32_t frameRcvMulti;
+ uint32_t strayXmitCmpl;
+ uint32_t frameXmitDelay;
+ uint32_t xriCmdCmpl;
+ uint32_t xriStatErr;
+ uint32_t LinkUp;
+ uint32_t LinkDown;
+ uint32_t LinkMultiEvent;
+ uint32_t NoRcvBuf;
+ uint32_t fcpCmd;
+ uint32_t fcpCmpl;
+ uint32_t fcpRspErr;
+ uint32_t fcpRemoteStop;
+ uint32_t fcpPortRjt;
+ uint32_t fcpPortBusy;
+ uint32_t fcpError;
+ uint32_t fcpLocalErr;
+};
+
+struct lpfc_hba;
+
+
+enum discovery_state {
+ LPFC_VPORT_UNKNOWN = 0, /* vport state is unknown */
+ LPFC_VPORT_FAILED = 1, /* vport has failed */
+ LPFC_LOCAL_CFG_LINK = 6, /* local NPORT Id configured */
+ LPFC_FLOGI = 7, /* FLOGI sent to Fabric */
+ LPFC_FDISC = 8, /* FDISC sent for vport */
+ LPFC_FABRIC_CFG_LINK = 9, /* Fabric assigned NPORT Id
+ * configured */
+ LPFC_NS_REG = 10, /* Register with NameServer */
+ LPFC_NS_QRY = 11, /* Query NameServer for NPort ID list */
+ LPFC_BUILD_DISC_LIST = 12, /* Build ADISC and PLOGI lists for
+ * device authentication / discovery */
+ LPFC_DISC_AUTH = 13, /* Processing ADISC list */
+ LPFC_VPORT_READY = 32,
+};
+
+enum hba_state {
+ LPFC_LINK_UNKNOWN = 0, /* HBA state is unknown */
+ LPFC_WARM_START = 1, /* HBA state after selective reset */
+ LPFC_INIT_START = 2, /* Initial state after board reset */
+ LPFC_INIT_MBX_CMDS = 3, /* Initialize HBA with mbox commands */
+ LPFC_LINK_DOWN = 4, /* HBA initialized, link is down */
+ LPFC_LINK_UP = 5, /* Link is up - issue READ_LA */
+ LPFC_CLEAR_LA = 6, /* authentication cmplt - issue
+ * CLEAR_LA */
+ LPFC_HBA_READY = 32,
+ LPFC_HBA_ERROR = -1
+};
+
+struct lpfc_vport {
+ struct lpfc_hba *phba;
+ struct list_head listentry;
+ uint8_t port_type;
+#define LPFC_PHYSICAL_PORT 1
+#define LPFC_NPIV_PORT 2
+#define LPFC_FABRIC_PORT 3
+ enum discovery_state port_state;
+
+ uint16_t vpi;
+ uint16_t vfi;
+ uint8_t vpi_state;
+#define LPFC_VPI_REGISTERED 0x1
+
+ uint32_t fc_flag; /* FC flags */
+/* Several of these flags are HBA centric and should be moved to
+ * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
+ */
+#define FC_PT2PT 0x1 /* pt2pt with no fabric */
+#define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */
+#define FC_DISC_TMO 0x4 /* Discovery timer running */
+#define FC_PUBLIC_LOOP 0x8 /* Public loop */
+#define FC_LBIT 0x10 /* LOGIN bit in loopinit set */
+#define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */
+#define FC_NLP_MORE 0x40 /* More node to process in node tbl */
+#define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */
+#define FC_FABRIC 0x100 /* We are fabric attached */
+#define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */
+#define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */
+#define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/
+#define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
+#define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
+#define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
+#define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */
+#define FC_VPORT_NEEDS_REG_VPI 0x80000 /* Needs to have its vpi registered */
+#define FC_RSCN_DEFERRED 0x100000 /* A deferred RSCN being processed */
+#define FC_VPORT_NEEDS_INIT_VPI 0x200000 /* Need to INIT_VPI before FDISC */
+#define FC_VPORT_CVL_RCVD 0x400000 /* VLink failed due to CVL */
+#define FC_VFI_REGISTERED 0x800000 /* VFI is registered */
+#define FC_FDISC_COMPLETED 0x1000000/* FDISC completed */
+#define FC_DISC_DELAYED 0x2000000/* Delay NPort discovery */
+
+ uint32_t ct_flags;
+#define FC_CT_RFF_ID 0x1 /* RFF_ID accepted by switch */
+#define FC_CT_RNN_ID 0x2 /* RNN_ID accepted by switch */
+#define FC_CT_RSNN_NN 0x4 /* RSNN_NN accepted by switch */
+#define FC_CT_RSPN_ID 0x8 /* RSPN_ID accepted by switch */
+#define FC_CT_RFT_ID 0x10 /* RFT_ID accepted by switch */
+
+ struct list_head fc_nodes;
+
+ /* Keep counters for the number of entries in each list. */
+ uint16_t fc_plogi_cnt;
+ uint16_t fc_adisc_cnt;
+ uint16_t fc_reglogin_cnt;
+ uint16_t fc_prli_cnt;
+ uint16_t fc_unmap_cnt;
+ uint16_t fc_map_cnt;
+ uint16_t fc_npr_cnt;
+ uint16_t fc_unused_cnt;
+ struct serv_parm fc_sparam; /* buffer for our service parameters */
+
+ uint32_t fc_myDID; /* fibre channel S_ID */
+ uint32_t fc_prevDID; /* previous fibre channel S_ID */
+ struct lpfc_name fabric_portname;
+ struct lpfc_name fabric_nodename;
+
+ int32_t stopped; /* HBA has not been restarted since last ERATT */
+ uint8_t fc_linkspeed; /* Link speed after last READ_LA */
+
+ uint32_t num_disc_nodes; /*in addition to hba_state */
+
+ uint32_t fc_nlp_cnt; /* outstanding NODELIST requests */
+ uint32_t fc_rscn_id_cnt; /* count of RSCNs payloads in list */
+ uint32_t fc_rscn_flush; /* flag use of fc_rscn_id_list */
+ struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
+ struct lpfc_name fc_nodename; /* fc nodename */
+ struct lpfc_name fc_portname; /* fc portname */
+
+ struct lpfc_work_evt disc_timeout_evt;
+
+ struct timer_list fc_disctmo; /* Discovery rescue timer */
+ uint8_t fc_ns_retry; /* retries for fabric nameserver */
+ uint32_t fc_prli_sent; /* cntr for outstanding PRLIs */
+
+ spinlock_t work_port_lock;
+ uint32_t work_port_events; /* Timeout to be handled */
+#define WORKER_DISC_TMO 0x1 /* vport: Discovery timeout */
+#define WORKER_ELS_TMO 0x2 /* vport: ELS timeout */
+#define WORKER_FDMI_TMO 0x4 /* vport: FDMI timeout */
+#define WORKER_DELAYED_DISC_TMO 0x8 /* vport: delayed discovery */
+
+#define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */
+#define WORKER_HB_TMO 0x200 /* hba: Heart beat timeout */
+#define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timeout */
+#define WORKER_RAMP_DOWN_QUEUE 0x800 /* hba: Decrease Q depth */
+#define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */
+#define WORKER_SERVICE_TXQ 0x2000 /* hba: IOCBs on the txq */
+
+ struct timer_list fc_fdmitmo;
+ struct timer_list els_tmofunc;
+ struct timer_list delayed_disc_tmo;
+
+ int unreg_vpi_cmpl;
+
+ uint8_t load_flag;
+#define FC_LOADING 0x1 /* HBA in process of loading drvr */
+#define FC_UNLOADING 0x2 /* HBA in process of unloading drvr */
+ /* Vport Config Parameters */
+ uint32_t cfg_scan_down;
+ uint32_t cfg_lun_queue_depth;
+ uint32_t cfg_nodev_tmo;
+ uint32_t cfg_devloss_tmo;
+ uint32_t cfg_restrict_login;
+ uint32_t cfg_peer_port_login;
+ uint32_t cfg_fcp_class;
+ uint32_t cfg_use_adisc;
+ uint32_t cfg_fdmi_on;
+ uint32_t cfg_discovery_threads;
+ uint32_t cfg_log_verbose;
+ uint32_t cfg_max_luns;
+ uint32_t cfg_enable_da_id;
+ uint32_t cfg_max_scsicmpl_time;
+ uint32_t cfg_tgt_queue_depth;
+
+ uint32_t dev_loss_tmo_changed;
+
+ struct fc_vport *fc_vport;
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ struct dentry *debug_disc_trc;
+ struct dentry *debug_nodelist;
+ struct dentry *vport_debugfs_root;
+ struct lpfc_debugfs_trc *disc_trc;
+ atomic_t disc_trc_cnt;
+#endif
+ uint8_t stat_data_enabled;
+ uint8_t stat_data_blocked;
+ struct list_head rcv_buffer_list;
+ unsigned long rcv_buffer_time_stamp;
+ uint32_t vport_flag;
+#define STATIC_VPORT 1
+};
+
+struct hbq_s {
+ uint16_t entry_count; /* Current number of HBQ slots */
+ uint16_t buffer_count; /* Current number of buffers posted */
+ uint32_t next_hbqPutIdx; /* Index to next HBQ slot to use */
+ uint32_t hbqPutIdx; /* HBQ slot to use */
+ uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
+ void *hbq_virt; /* Virtual ptr to this hbq */
+ struct list_head hbq_buffer_list; /* buffers assigned to this HBQ */
+ /* Callback for HBQ buffer allocation */
+ struct hbq_dmabuf *(*hbq_alloc_buffer) (struct lpfc_hba *);
+ /* Callback for HBQ buffer free */
+ void (*hbq_free_buffer) (struct lpfc_hba *,
+ struct hbq_dmabuf *);
+};
+
+#define LPFC_MAX_HBQS 4
+/* this matches the position in the lpfc_hbq_defs array */
+#define LPFC_ELS_HBQ 0
+#define LPFC_EXTRA_HBQ 1
+
+enum hba_temp_state {
+ HBA_NORMAL_TEMP,
+ HBA_OVER_TEMP
+};
+
+enum intr_type_t {
+ NONE = 0,
+ INTx,
+ MSI,
+ MSIX,
+};
+
+struct unsol_rcv_ct_ctx {
+ uint32_t ctxt_id;
+ uint32_t SID;
+ uint32_t flags;
+#define UNSOL_VALID 0x00000001
+ uint16_t oxid;
+ uint16_t rxid;
+};
+
+#define LPFC_USER_LINK_SPEED_AUTO 0 /* auto select (default)*/
+#define LPFC_USER_LINK_SPEED_1G 1 /* 1 Gigabaud */
+#define LPFC_USER_LINK_SPEED_2G 2 /* 2 Gigabaud */
+#define LPFC_USER_LINK_SPEED_4G 4 /* 4 Gigabaud */
+#define LPFC_USER_LINK_SPEED_8G 8 /* 8 Gigabaud */
+#define LPFC_USER_LINK_SPEED_10G 10 /* 10 Gigabaud */
+#define LPFC_USER_LINK_SPEED_16G 16 /* 16 Gigabaud */
+#define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_16G
+#define LPFC_USER_LINK_SPEED_BITMAP ((1 << LPFC_USER_LINK_SPEED_16G) | \
+ (1 << LPFC_USER_LINK_SPEED_10G) | \
+ (1 << LPFC_USER_LINK_SPEED_8G) | \
+ (1 << LPFC_USER_LINK_SPEED_4G) | \
+ (1 << LPFC_USER_LINK_SPEED_2G) | \
+ (1 << LPFC_USER_LINK_SPEED_1G) | \
+ (1 << LPFC_USER_LINK_SPEED_AUTO))
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16"
+
+enum nemb_type {
+ nemb_mse = 1,
+ nemb_hbd
+};
+
+enum mbox_type {
+ mbox_rd = 1,
+ mbox_wr
+};
+
+enum dma_type {
+ dma_mbox = 1,
+ dma_ebuf
+};
+
+enum sta_type {
+ sta_pre_addr = 1,
+ sta_pos_addr
+};
+
+struct lpfc_mbox_ext_buf_ctx {
+ uint32_t state;
+#define LPFC_BSG_MBOX_IDLE 0
+#define LPFC_BSG_MBOX_HOST 1
+#define LPFC_BSG_MBOX_PORT 2
+#define LPFC_BSG_MBOX_DONE 3
+#define LPFC_BSG_MBOX_ABTS 4
+ enum nemb_type nembType;
+ enum mbox_type mboxType;
+ uint32_t numBuf;
+ uint32_t mbxTag;
+ uint32_t seqNum;
+ struct lpfc_dmabuf *mbx_dmabuf;
+ struct list_head ext_dmabuf_list;
+};
+
+struct lpfc_hba {
+ /* SCSI interface function jump table entries */
+ int (*lpfc_new_scsi_buf)
+ (struct lpfc_vport *, int);
+ struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
+ (struct lpfc_hba *, struct lpfc_nodelist *);
+ int (*lpfc_scsi_prep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_scsi_unprep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_release_scsi_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_rampdown_queue_depth)
+ (struct lpfc_hba *);
+ void (*lpfc_scsi_prep_cmnd)
+ (struct lpfc_vport *, struct lpfc_scsi_buf *,
+ struct lpfc_nodelist *);
+
+ /* IOCB interface function jump table entries */
+ int (*__lpfc_sli_issue_iocb)
+ (struct lpfc_hba *, uint32_t,
+ struct lpfc_iocbq *, uint32_t);
+ void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
+ struct lpfc_iocbq *);
+ int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
+ IOCB_t * (*lpfc_get_iocb_from_iocbq)
+ (struct lpfc_iocbq *);
+ void (*lpfc_scsi_cmd_iocb_cmpl)
+ (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
+
+ /* MBOX interface function jump table entries */
+ int (*lpfc_sli_issue_mbox)
+ (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+
+ /* Slow-path IOCB process function jump table entries */
+ void (*lpfc_sli_handle_slow_ring_event)
+ (struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ uint32_t mask);
+
+ /* INIT device interface function jump table entries */
+ int (*lpfc_sli_hbq_to_firmware)
+ (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
+ int (*lpfc_sli_brdrestart)
+ (struct lpfc_hba *);
+ int (*lpfc_sli_brdready)
+ (struct lpfc_hba *, uint32_t);
+ void (*lpfc_handle_eratt)
+ (struct lpfc_hba *);
+ void (*lpfc_stop_port)
+ (struct lpfc_hba *);
+ int (*lpfc_hba_init_link)
+ (struct lpfc_hba *, uint32_t);
+ int (*lpfc_hba_down_link)
+ (struct lpfc_hba *, uint32_t);
+ int (*lpfc_selective_reset)
+ (struct lpfc_hba *);
+
+ int (*lpfc_bg_scsi_prep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ /* Add new entries here */
+
+ /* SLI4 specific HBA data structure */
+ struct lpfc_sli4_hba sli4_hba;
+
+ struct lpfc_sli sli;
+ uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
+ uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */
+ uint32_t sli3_options; /* Mask of enabled SLI3 options */
+#define LPFC_SLI3_HBQ_ENABLED 0x01
+#define LPFC_SLI3_NPIV_ENABLED 0x02
+#define LPFC_SLI3_VPORT_TEARDOWN 0x04
+#define LPFC_SLI3_CRP_ENABLED 0x08
+#define LPFC_SLI3_BG_ENABLED 0x20
+#define LPFC_SLI3_DSS_ENABLED 0x40
+#define LPFC_SLI4_PERFH_ENABLED 0x80
+#define LPFC_SLI4_PHWQ_ENABLED 0x100
+ uint32_t iocb_cmd_size;
+ uint32_t iocb_rsp_size;
+
+ enum hba_state link_state;
+ uint32_t link_flag; /* link state flags */
+#define LS_LOOPBACK_MODE 0x1 /* NPort is in Loopback mode */
+ /* This flag is set while issuing */
+ /* INIT_LINK mailbox command */
+#define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
+#define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */
+
+ uint32_t hba_flag; /* hba generic flags */
+#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
+#define DEFER_ERATT 0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_MODE 0x4 /* HBA function in FCoE Mode */
+#define HBA_SP_QUEUE_EVT 0x8 /* Slow-path qevt posted to worker thread*/
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT 0x20
+#define ELS_XRI_ABORT_EVENT 0x40
+#define ASYNC_EVENT 0x80
+#define LINK_DISABLED 0x100 /* Link disabled by user */
+#define FCF_TS_INPROG 0x200 /* FCF table scan in progress */
+#define FCF_RR_INPROG 0x400 /* FCF roundrobin flogi in progress */
+#define HBA_FIP_SUPPORT 0x800 /* FIP support in HBA */
+#define HBA_AER_ENABLED 0x1000 /* AER enabled with HBA */
+#define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */
+#define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */
+ uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
+ struct lpfc_dmabuf slim2p;
+
+ MAILBOX_t *mbox;
+ uint32_t *mbox_ext;
+ struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx;
+ uint32_t ha_copy;
+ struct _PCB *pcb;
+ struct _IOCB *IOCBs;
+
+ struct lpfc_dmabuf hbqslimp;
+
+ uint16_t pci_cfg_value;
+
+ uint8_t fc_linkspeed; /* Link speed after last READ_LA */
+
+ uint32_t fc_eventTag; /* event tag for link attention */
+ uint32_t link_events;
+
+ /* These fields used to be binfo */
+ uint32_t fc_pref_DID; /* preferred D_ID */
+ uint8_t fc_pref_ALPA; /* preferred AL_PA */
+ uint32_t fc_edtovResol; /* E_D_TOV timer resolution */
+ uint32_t fc_edtov; /* E_D_TOV timer value */
+ uint32_t fc_arbtov; /* ARB_TOV timer value */
+ uint32_t fc_ratov; /* R_A_TOV timer value */
+ uint32_t fc_rttov; /* R_T_TOV timer value */
+ uint32_t fc_altov; /* AL_TOV timer value */
+ uint32_t fc_crtov; /* C_R_TOV timer value */
+ uint32_t fc_citov; /* C_I_TOV timer value */
+
+ struct serv_parm fc_fabparam; /* fabric service parameters buffer */
+ uint8_t alpa_map[128]; /* AL_PA map from READ_LA */
+
+ uint32_t lmt;
+
+ uint32_t fc_topology; /* link topology, from LINK INIT */
+
+ struct lpfc_stats fc_stat;
+
+ struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
+ uint32_t nport_event_cnt; /* timestamp for nlplist entry */
+
+ uint8_t wwnn[8];
+ uint8_t wwpn[8];
+ uint32_t RandomData[7];
+
+ /* HBA Config Parameters */
+ uint32_t cfg_ack0;
+ uint32_t cfg_enable_npiv;
+ uint32_t cfg_enable_rrq;
+ uint32_t cfg_topology;
+ uint32_t cfg_link_speed;
+#define LPFC_FCF_FOV 1 /* Fast fcf failover */
+#define LPFC_FCF_PRIORITY 2 /* Priority fcf failover */
+ uint32_t cfg_fcf_failover_policy;
+ uint32_t cfg_cr_delay;
+ uint32_t cfg_cr_count;
+ uint32_t cfg_multi_ring_support;
+ uint32_t cfg_multi_ring_rctl;
+ uint32_t cfg_multi_ring_type;
+ uint32_t cfg_poll;
+ uint32_t cfg_poll_tmo;
+ uint32_t cfg_use_msi;
+ uint32_t cfg_fcp_imax;
+ uint32_t cfg_fcp_wq_count;
+ uint32_t cfg_fcp_eq_count;
+ uint32_t cfg_sg_seg_cnt;
+ uint32_t cfg_prot_sg_seg_cnt;
+ uint32_t cfg_sg_dma_buf_size;
+ uint64_t cfg_soft_wwnn;
+ uint64_t cfg_soft_wwpn;
+ uint32_t cfg_hba_queue_depth;
+ uint32_t cfg_enable_hba_reset;
+ uint32_t cfg_enable_hba_heartbeat;
+ uint32_t cfg_enable_bg;
+ uint32_t cfg_hostmem_hgp;
+ uint32_t cfg_log_verbose;
+ uint32_t cfg_aer_support;
+ uint32_t cfg_sriov_nr_virtfn;
+ uint32_t cfg_iocb_cnt;
+ uint32_t cfg_suppress_link_up;
+#define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */
+#define LPFC_DELAY_INIT_LINK 1 /* layered driver hold off */
+#define LPFC_DELAY_INIT_LINK_INDEFINITELY 2 /* wait, manual intervention */
+ uint32_t cfg_enable_dss;
+ lpfc_vpd_t vpd; /* vital product data */
+
+ struct pci_dev *pcidev;
+ struct list_head work_list;
+ uint32_t work_ha; /* Host Attention Bits for WT */
+ uint32_t work_ha_mask; /* HA Bits owned by WT */
+ uint32_t work_hs; /* HS stored in case of ERRAT */
+ uint32_t work_status[2]; /* Extra status from SLIM */
+
+ wait_queue_head_t work_waitq;
+ struct task_struct *worker_thread;
+ unsigned long data_flags;
+
+ uint32_t hbq_in_use; /* HBQs in use flag */
+ struct list_head rb_pend_list; /* Received buffers to be processed */
+ uint32_t hbq_count; /* Count of configured HBQs */
+ struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
+
+ uint32_t fcp_qidx; /* next work queue to post work to */
+
+ unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */
+ unsigned long pci_bar1_map; /* Physical address for PCI BAR1 */
+ unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */
+ void __iomem *slim_memmap_p; /* Kernel memory mapped address for
+ PCI BAR0 */
+ void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for
+ PCI BAR2 */
+
+ void __iomem *MBslimaddr; /* virtual address for mbox cmds */
+ void __iomem *HAregaddr; /* virtual address for host attn reg */
+ void __iomem *CAregaddr; /* virtual address for chip attn reg */
+ void __iomem *HSregaddr; /* virtual address for host status
+ reg */
+ void __iomem *HCregaddr; /* virtual address for host ctl reg */
+
+ struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
+ struct lpfc_pgp *port_gp;
+ uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */
+ uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */
+
+ int brd_no; /* FC board number */
+ char SerialNumber[32]; /* adapter Serial Number */
+ char OptionROMVersion[32]; /* adapter BIOS / Fcode version */
+ char ModelDesc[256]; /* Model Description */
+ char ModelName[80]; /* Model Name */
+ char ProgramType[256]; /* Program Type */
+ char Port[20]; /* Port No */
+ uint8_t vpd_flag; /* VPD data flag */
+
+#define VPD_MODEL_DESC 0x1 /* valid vpd model description */
+#define VPD_MODEL_NAME 0x2 /* valid vpd model name */
+#define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */
+#define VPD_PORT 0x8 /* valid vpd port data */
+#define VPD_MASK 0xf /* mask for any vpd data */
+
+ uint8_t soft_wwn_enable;
+
+ struct timer_list fcp_poll_timer;
+ struct timer_list eratt_poll;
+
+ /*
+ * stat counters
+ */
+ uint64_t fc4InputRequests;
+ uint64_t fc4OutputRequests;
+ uint64_t fc4ControlRequests;
+ uint64_t bg_guard_err_cnt;
+ uint64_t bg_apptag_err_cnt;
+ uint64_t bg_reftag_err_cnt;
+
+ /* fastpath list. */
+ spinlock_t scsi_buf_list_lock;
+ struct list_head lpfc_scsi_buf_list;
+ uint32_t total_scsi_bufs;
+ struct list_head lpfc_iocb_list;
+ uint32_t total_iocbq_bufs;
+ struct list_head active_rrq_list;
+ spinlock_t hbalock;
+
+ /* pci_mem_pools */
+ struct pci_pool *lpfc_scsi_dma_buf_pool;
+ struct pci_pool *lpfc_mbuf_pool;
+ struct pci_pool *lpfc_hrb_pool; /* header receive buffer pool */
+ struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
+ struct pci_pool *lpfc_hbq_pool; /* SLI3 hbq buffer pool */
+ struct lpfc_dma_pool lpfc_mbuf_safety_pool;
+
+ mempool_t *mbox_mem_pool;
+ mempool_t *nlp_mem_pool;
+ mempool_t *rrq_pool;
+
+ struct fc_host_statistics link_stats;
+ enum intr_type_t intr_type;
+ uint32_t intr_mode;
+#define LPFC_INTR_ERROR 0xFFFFFFFF
+ struct msix_entry msix_entries[LPFC_MSIX_VECTORS];
+
+ struct list_head port_list;
+ struct lpfc_vport *pport; /* physical lpfc_vport pointer */
+ uint16_t max_vpi; /* Maximum virtual nports */
+#define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */
+ uint16_t max_vports; /*
+ * For IOV HBAs max_vpi can change
+ * after a reset. max_vports is max
+ * number of vports present. This can
+ * be greater than max_vpi.
+ */
+ uint16_t vpi_base;
+ uint16_t vfi_base;
+ unsigned long *vpi_bmask; /* vpi allocation table */
+ uint16_t *vpi_ids;
+ uint16_t vpi_count;
+ struct list_head lpfc_vpi_blk_list;
+
+ /* Data structure used by fabric iocb scheduler */
+ struct list_head fabric_iocb_list;
+ atomic_t fabric_iocb_count;
+ struct timer_list fabric_block_timer;
+ unsigned long bit_flags;
+#define FABRIC_COMANDS_BLOCKED 0
+ atomic_t num_rsrc_err;
+ atomic_t num_cmd_success;
+ unsigned long last_rsrc_error_time;
+ unsigned long last_ramp_down_time;
+ unsigned long last_ramp_up_time;
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+ struct dentry *hba_debugfs_root;
+ atomic_t debugfs_vport_count;
+ struct dentry *debug_hbqinfo;
+ struct dentry *debug_dumpHostSlim;
+ struct dentry *debug_dumpHBASlim;
+ struct dentry *debug_dumpData; /* BlockGuard BPL */
+ struct dentry *debug_dumpDif; /* BlockGuard BPL */
+ struct dentry *debug_InjErrLBA; /* LBA to inject errors at */
+ struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */
+ struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */
+ struct dentry *debug_writeGuard; /* inject write guard_tag errors */
+ struct dentry *debug_writeApp; /* inject write app_tag errors */
+ struct dentry *debug_writeRef; /* inject write ref_tag errors */
+ struct dentry *debug_readGuard; /* inject read guard_tag errors */
+ struct dentry *debug_readApp; /* inject read app_tag errors */
+ struct dentry *debug_readRef; /* inject read ref_tag errors */
+
+ /* T10 DIF error injection */
+ uint32_t lpfc_injerr_wgrd_cnt;
+ uint32_t lpfc_injerr_wapp_cnt;
+ uint32_t lpfc_injerr_wref_cnt;
+ uint32_t lpfc_injerr_rgrd_cnt;
+ uint32_t lpfc_injerr_rapp_cnt;
+ uint32_t lpfc_injerr_rref_cnt;
+ uint32_t lpfc_injerr_nportid;
+ struct lpfc_name lpfc_injerr_wwpn;
+ sector_t lpfc_injerr_lba;
+#define LPFC_INJERR_LBA_OFF (sector_t)(-1)
+
+ struct dentry *debug_slow_ring_trc;
+ struct lpfc_debugfs_trc *slow_ring_trc;
+ atomic_t slow_ring_trc_cnt;
+ /* iDiag debugfs sub-directory */
+ struct dentry *idiag_root;
+ struct dentry *idiag_pci_cfg;
+ struct dentry *idiag_bar_acc;
+ struct dentry *idiag_que_info;
+ struct dentry *idiag_que_acc;
+ struct dentry *idiag_drb_acc;
+ struct dentry *idiag_ctl_acc;
+ struct dentry *idiag_mbx_acc;
+ struct dentry *idiag_ext_acc;
+#endif
+
+ /* Used for deferred freeing of ELS data buffers */
+ struct list_head elsbuf;
+ int elsbuf_cnt;
+ int elsbuf_prev_cnt;
+
+ uint8_t temp_sensor_support;
+ /* Fields used for heart beat. */
+ unsigned long last_completion_time;
+ unsigned long skipped_hb;
+ struct timer_list hb_tmofunc;
+ uint8_t hb_outstanding;
+ struct timer_list rrq_tmr;
+ enum hba_temp_state over_temp_state;
+ /* ndlp reference management */
+ spinlock_t ndlp_lock;
+ /*
+ * Following bit will be set for all buffer tags which are not
+ * associated with any HBQ.
+ */
+#define QUE_BUFTAG_BIT (1<<31)
+ uint32_t buffer_tag_count;
+ int wait_4_mlo_maint_flg;
+ wait_queue_head_t wait_4_mlo_m_q;
+ /* data structure used for latency data collection */
+#define LPFC_NO_BUCKET 0
+#define LPFC_LINEAR_BUCKET 1
+#define LPFC_POWER2_BUCKET 2
+ uint8_t bucket_type;
+ uint32_t bucket_base;
+ uint32_t bucket_step;
+
+/* Maximum number of events that can be outstanding at any time*/
+#define LPFC_MAX_EVT_COUNT 512
+ atomic_t fast_event_count;
+ uint32_t fcoe_eventtag;
+ uint32_t fcoe_eventtag_at_fcf_scan;
+ uint32_t fcoe_cvl_eventtag;
+ uint32_t fcoe_cvl_eventtag_attn;
+ struct lpfc_fcf fcf;
+ uint8_t fc_map[3];
+ uint8_t valid_vlan;
+ uint16_t vlan_id;
+ struct list_head fcf_conn_rec_list;
+
+ spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */
+ struct list_head ct_ev_waiters;
+ struct unsol_rcv_ct_ctx ct_ctx[64];
+ uint32_t ctx_idx;
+
+ uint8_t menlo_flag; /* menlo generic flags */
+#define HBA_MENLO_SUPPORT 0x1 /* HBA supports menlo commands */
+ uint32_t iocb_cnt;
+ uint32_t iocb_max;
+ atomic_t sdev_cnt;
+ uint8_t fips_spec_rev;
+ uint8_t fips_level;
+};
+
+static inline struct Scsi_Host *
+lpfc_shost_from_vport(struct lpfc_vport *vport)
+{
+ return container_of((void *) vport, struct Scsi_Host, hostdata[0]);
+}
+
+static inline void
+lpfc_set_loopback_flag(struct lpfc_hba *phba)
+{
+ if (phba->cfg_topology == FLAGS_LOCAL_LB)
+ phba->link_flag |= LS_LOOPBACK_MODE;
+ else
+ phba->link_flag &= ~LS_LOOPBACK_MODE;
+}
+
+static inline int
+lpfc_is_link_up(struct lpfc_hba *phba)
+{
+ return phba->link_state == LPFC_LINK_UP ||
+ phba->link_state == LPFC_CLEAR_LA ||
+ phba->link_state == LPFC_HBA_READY;
+}
+
+static inline void
+lpfc_worker_wake_up(struct lpfc_hba *phba)
+{
+ /* Set the lpfc data pending flag */
+ set_bit(LPFC_DATA_READY, &phba->data_flags);
+
+ /* Wake up worker thread */
+ wake_up(&phba->work_waitq);
+ return;
+}
+
+static inline int
+lpfc_readl(void __iomem *addr, uint32_t *data)
+{
+ uint32_t temp;
+ temp = readl(addr);
+ if (temp == 0xffffffff)
+ return -EIO;
+ *data = temp;
+ return 0;
+}
+
+static inline int
+lpfc_sli_read_hs(struct lpfc_hba *phba)
+{
+ /*
+ * There was a link/board error. Read the status register to retrieve
+ * the error event and process it.
+ */
+ phba->sli.slistat.err_attn_event++;
+
+ /* Save status info and check for unplug error */
+ if (lpfc_readl(phba->HSregaddr, &phba->work_hs) ||
+ lpfc_readl(phba->MBslimaddr + 0xa8, &phba->work_status[0]) ||
+ lpfc_readl(phba->MBslimaddr + 0xac, &phba->work_status[1])) {
+ return -EIO;
+ }
+
+ /* Clear chip Host Attention error bit */
+ writel(HA_ERATT, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+ phba->pport->stopped = 1;
+
+ return 0;
+}