zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/usb/host/ehci.h b/ap/os/linux/linux-3.4.x/drivers/usb/host/ehci.h
new file mode 100644
index 0000000..2694ed6
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/usb/host/ehci.h
@@ -0,0 +1,775 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_EHCI_HCD_H
+#define __LINUX_EHCI_HCD_H
+
+/* definitions used for the EHCI driver */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
+ * the host controller implementation.
+ *
+ * To facilitate the strongest possible byte-order checking from "sparse"
+ * and so on, we use __leXX unless that's not practical.
+ */
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+typedef __u32 __bitwise __hc32;
+typedef __u16 __bitwise __hc16;
+#else
+#define __hc32 __le32
+#define __hc16 __le16
+#endif
+
+/* statistics can be kept for tuning/monitoring */
+struct ehci_stats {
+ /* irq usage */
+ unsigned long normal;
+ unsigned long error;
+ unsigned long reclaim;
+ unsigned long lost_iaa;
+
+ /* termination of urbs from core */
+ unsigned long complete;
+ unsigned long unlink;
+};
+
+/* ehci_hcd->lock guards shared data against other CPUs:
+ * ehci_hcd: async, reclaim, periodic (and shadow), ...
+ * usb_host_endpoint: hcpriv
+ * ehci_qh: qh_next, qtd_list
+ * ehci_qtd: qtd_list
+ *
+ * Also, hold this lock when talking to HC registers or
+ * when updating hw_* fields in shared qh/qtd/... structures.
+ */
+
+#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
+
+enum ehci_rh_state {
+ EHCI_RH_HALTED,
+ EHCI_RH_SUSPENDED,
+ EHCI_RH_RUNNING
+};
+
+struct ehci_hcd { /* one per controller */
+ /* glue to PCI and HCD framework */
+ struct ehci_caps __iomem *caps;
+ struct ehci_regs __iomem *regs;
+ struct ehci_dbg_port __iomem *debug;
+
+ __u32 hcs_params; /* cached register copy */
+ spinlock_t lock;
+ enum ehci_rh_state rh_state;
+
+ /* async schedule support */
+ struct ehci_qh *async;
+ struct ehci_qh *dummy; /* For AMD quirk use */
+ struct ehci_qh *reclaim;
+ struct ehci_qh *qh_scan_next;
+ unsigned scanning : 1;
+
+ /* periodic schedule support */
+#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
+ unsigned periodic_size;
+ __hc32 *periodic; /* hw periodic table */
+ dma_addr_t periodic_dma;
+ unsigned i_thresh; /* uframes HC might cache */
+
+ union ehci_shadow *pshadow; /* mirror hw periodic table */
+ int next_uframe; /* scan periodic, start here */
+ unsigned periodic_sched; /* periodic activity count */
+ unsigned uframe_periodic_max; /* max periodic time per uframe */
+
+
+ /* list of itds & sitds completed while clock_frame was still active */
+ struct list_head cached_itd_list;
+ struct list_head cached_sitd_list;
+ unsigned clock_frame;
+
+ /* per root hub port */
+ unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
+
+ /* bit vectors (one bit per port) */
+ unsigned long bus_suspended; /* which ports were
+ already suspended at the start of a bus suspend */
+ unsigned long companion_ports; /* which ports are
+ dedicated to the companion controller */
+ unsigned long owned_ports; /* which ports are
+ owned by the companion during a bus suspend */
+ unsigned long port_c_suspend; /* which ports have
+ the change-suspend feature turned on */
+ unsigned long suspended_ports; /* which ports are
+ suspended */
+ unsigned long resuming_ports; /* which ports have
+ started to resume */
+
+ /* per-HC memory pools (could be per-bus, but ...) */
+ struct dma_pool *qh_pool; /* qh per active urb */
+ struct dma_pool *qtd_pool; /* one or more per qh */
+ struct dma_pool *itd_pool; /* itd per iso urb */
+ struct dma_pool *sitd_pool; /* sitd per split iso urb */
+
+ struct timer_list iaa_watchdog;
+ struct timer_list watchdog;
+ unsigned long actions;
+ unsigned periodic_stamp;
+ unsigned random_frame;
+ unsigned long next_statechange;
+ ktime_t last_periodic_enable;
+ u32 command;
+
+ /* SILICON QUIRKS */
+ unsigned no_selective_suspend:1;
+ unsigned has_fsl_port_bug:1; /* FreeScale */
+ unsigned big_endian_mmio:1;
+ unsigned big_endian_desc:1;
+ unsigned big_endian_capbase:1;
+ unsigned has_amcc_usb23:1;
+ unsigned need_io_watchdog:1;
+ unsigned broken_periodic:1;
+ unsigned amd_pll_fix:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
+ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/
+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
+ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
+
+ /* required for usb32 quirk */
+ #define OHCI_CTRL_HCFS (3 << 6)
+ #define OHCI_USB_OPER (2 << 6)
+ #define OHCI_USB_SUSPEND (3 << 6)
+
+ #define OHCI_HCCTRL_OFFSET 0x4
+ #define OHCI_HCCTRL_LEN 0x4
+ __hc32 *ohci_hcctrl_reg;
+ unsigned has_hostpc:1;
+ unsigned has_lpm:1; /* support link power management */
+ unsigned has_ppcd:1; /* support per-port change bits */
+ u8 sbrn; /* packed release number */
+
+ /* irq statistics */
+#ifdef EHCI_STATS
+ struct ehci_stats stats;
+# define COUNT(x) do { (x)++; } while (0)
+#else
+# define COUNT(x) do {} while (0)
+#endif
+
+ /* debug files */
+#ifdef DEBUG
+ struct dentry *debug_dir;
+#endif
+ /*
+ * OTG controllers and transceivers need software interaction
+ */
+ struct usb_phy *transceiver;
+};
+
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
+static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
+{
+ return (struct ehci_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
+{
+ return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
+}
+
+
+static inline void
+iaa_watchdog_start(struct ehci_hcd *ehci)
+{
+ WARN_ON(timer_pending(&ehci->iaa_watchdog));
+ mod_timer(&ehci->iaa_watchdog,
+ jiffies + msecs_to_jiffies(EHCI_IAA_MSECS));
+}
+
+static inline void iaa_watchdog_done(struct ehci_hcd *ehci)
+{
+ del_timer(&ehci->iaa_watchdog);
+}
+
+enum ehci_timer_action {
+ TIMER_IO_WATCHDOG,
+ TIMER_ASYNC_SHRINK,
+ TIMER_ASYNC_OFF,
+};
+
+static inline void
+timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
+{
+ clear_bit (action, &ehci->actions);
+}
+
+static void free_cached_lists(struct ehci_hcd *ehci);
+
+/*-------------------------------------------------------------------------*/
+
+#include <linux/usb/ehci_def.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define QTD_NEXT(ehci, dma) cpu_to_hc32(ehci, (u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct ehci_qtd {
+ /* first part defined by EHCI spec */
+ __hc32 hw_next; /* see EHCI 3.5.1 */
+ __hc32 hw_alt_next; /* see EHCI 3.5.2 */
+ __hc32 hw_token; /* see EHCI 3.5.3 */
+#define QTD_TOGGLE (1 << 31) /* data toggle */
+#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
+#define QTD_IOC (1 << 15) /* interrupt on complete */
+#define QTD_CERR(tok) (((tok)>>10) & 0x3)
+#define QTD_PID(tok) (((tok)>>8) & 0x3)
+#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
+#define QTD_STS_HALT (1 << 6) /* halted on error */
+#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
+#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
+#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
+#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
+#define QTD_STS_STS (1 << 1) /* split transaction state */
+#define QTD_STS_PING (1 << 0) /* issue PING? */
+
+#define ACTIVE_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_ACTIVE)
+#define HALT_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_HALT)
+#define STATUS_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_STS)
+
+ __hc32 hw_buf [5]; /* see EHCI 3.5.4 */
+ __hc32 hw_buf_hi [5]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t qtd_dma; /* qtd address */
+ struct list_head qtd_list; /* sw qtd list */
+ struct urb *urb; /* qtd's urb */
+ size_t length; /* length of buffer */
+} __attribute__ ((aligned (32)));
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK(ehci) cpu_to_hc32 (ehci, ~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
+
+/*-------------------------------------------------------------------------*/
+
+/* type tag from {qh,itd,sitd,fstn}->hw_next */
+#define Q_NEXT_TYPE(ehci,dma) ((dma) & cpu_to_hc32(ehci, 3 << 1))
+
+/*
+ * Now the following defines are not converted using the
+ * cpu_to_le32() macro anymore, since we have to support
+ * "dynamic" switching between be and le support, so that the driver
+ * can be used on one system with SoC EHCI controller using big-endian
+ * descriptors as well as a normal little-endian PCI EHCI controller.
+ */
+/* values for that type tag */
+#define Q_TYPE_ITD (0 << 1)
+#define Q_TYPE_QH (1 << 1)
+#define Q_TYPE_SITD (2 << 1)
+#define Q_TYPE_FSTN (3 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define QH_NEXT(ehci,dma) (cpu_to_hc32(ehci, (((u32)dma)&~0x01f)|Q_TYPE_QH))
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define EHCI_LIST_END(ehci) cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure. That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule. Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union ehci_shadow {
+ struct ehci_qh *qh; /* Q_TYPE_QH */
+ struct ehci_itd *itd; /* Q_TYPE_ITD */
+ struct ehci_sitd *sitd; /* Q_TYPE_SITD */
+ struct ehci_fstn *fstn; /* Q_TYPE_FSTN */
+ __hc32 *hw_next; /* (all types) */
+ void *ptr;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+/* first part defined by EHCI spec */
+struct ehci_qh_hw {
+ __hc32 hw_next; /* see EHCI 3.6.1 */
+ __hc32 hw_info1; /* see EHCI 3.6.2 */
+#define QH_HEAD 0x00008000
+ __hc32 hw_info2; /* see EHCI 3.6.2 */
+#define QH_SMASK 0x000000ff
+#define QH_CMASK 0x0000ff00
+#define QH_HUBADDR 0x007f0000
+#define QH_HUBPORT 0x3f800000
+#define QH_MULT 0xc0000000
+ __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
+
+ /* qtd overlay (hardware parts of a struct ehci_qtd) */
+ __hc32 hw_qtd_next;
+ __hc32 hw_alt_next;
+ __hc32 hw_token;
+ __hc32 hw_buf [5];
+ __hc32 hw_buf_hi [5];
+} __attribute__ ((aligned(32)));
+
+struct ehci_qh {
+ struct ehci_qh_hw *hw;
+ /* the rest is HCD-private */
+ dma_addr_t qh_dma; /* address of qh */
+ union ehci_shadow qh_next; /* ptr to qh; or periodic */
+ struct list_head qtd_list; /* sw qtd list */
+ struct ehci_qtd *dummy;
+ struct ehci_qh *reclaim; /* next to reclaim */
+
+ struct ehci_hcd *ehci;
+ unsigned long unlink_time;
+
+ /*
+ * Do NOT use atomic operations for QH refcounting. On some CPUs
+ * (PPC7448 for example), atomic operations cannot be performed on
+ * memory that is cache-inhibited (i.e. being used for DMA).
+ * Spinlocks are used to protect all QH fields.
+ */
+ u32 refcount;
+ unsigned stamp;
+
+ u8 needs_rescan; /* Dequeue during giveback */
+ u8 qh_state;
+#define QH_STATE_LINKED 1 /* HC sees this */
+#define QH_STATE_UNLINK 2 /* HC may still see this */
+#define QH_STATE_IDLE 3 /* HC doesn't see this */
+#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */
+#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
+
+ u8 xacterrs; /* XactErr retry counter */
+#define QH_XACTERR_MAX 32 /* XactErr retry limit */
+
+ /* periodic schedule info */
+ u8 usecs; /* intr bandwidth */
+ u8 gap_uf; /* uframes split/csplit gap */
+ u8 c_usecs; /* ... split completion bw */
+ u16 tt_usecs; /* tt downstream bandwidth */
+ unsigned short period; /* polling interval */
+ unsigned short start; /* where polling starts */
+#define NO_FRAME ((unsigned short)~0) /* pick new start */
+
+ struct usb_device *dev; /* access to TT */
+ unsigned is_out:1; /* bulk or intr OUT */
+ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* description of one iso transaction (up to 3 KB data if highspeed) */
+struct ehci_iso_packet {
+ /* These will be copied to iTD when scheduling */
+ u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
+ __hc32 transaction; /* itd->hw_transaction[i] |= */
+ u8 cross; /* buf crosses pages */
+ /* for full speed OUT splits */
+ u32 buf1;
+};
+
+/* temporary schedule data for packets from iso urbs (both speeds)
+ * each packet is one logical usb transaction to the device (not TT),
+ * beginning at stream->next_uframe
+ */
+struct ehci_iso_sched {
+ struct list_head td_list;
+ unsigned span;
+ struct ehci_iso_packet packet [0];
+};
+
+/*
+ * ehci_iso_stream - groups all (s)itds for this endpoint.
+ * acts like a qh would, if EHCI had them for ISO.
+ */
+struct ehci_iso_stream {
+ /* first field matches ehci_hq, but is NULL */
+ struct ehci_qh_hw *hw;
+
+ u32 refcount;
+ u8 bEndpointAddress;
+ u8 highspeed;
+ struct list_head td_list; /* queued itds/sitds */
+ struct list_head free_list; /* list of unused itds/sitds */
+ struct usb_device *udev;
+ struct usb_host_endpoint *ep;
+
+ /* output of (re)scheduling */
+ int next_uframe;
+ __hc32 splits;
+
+ /* the rest is derived from the endpoint descriptor,
+ * trusting urb->interval == f(epdesc->bInterval) and
+ * including the extra info for hw_bufp[0..2]
+ */
+ u8 usecs, c_usecs;
+ u16 interval;
+ u16 tt_usecs;
+ u16 maxp;
+ u16 raw_mask;
+ unsigned bandwidth;
+
+ /* This is used to initialize iTD's hw_bufp fields */
+ __hc32 buf0;
+ __hc32 buf1;
+ __hc32 buf2;
+
+ /* this is used to initialize sITD's tt info */
+ __hc32 address;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.3
+ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
+ *
+ * Schedule records for high speed iso xfers
+ */
+struct ehci_itd {
+ /* first part defined by EHCI spec */
+ __hc32 hw_next; /* see EHCI 3.3.1 */
+ __hc32 hw_transaction [8]; /* see EHCI 3.3.2 */
+#define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
+#define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */
+#define EHCI_ISOC_BABBLE (1<<29) /* babble detected */
+#define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
+#define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
+#define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */
+
+#define ITD_ACTIVE(ehci) cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
+
+ __hc32 hw_bufp [7]; /* see EHCI 3.3.3 */
+ __hc32 hw_bufp_hi [7]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t itd_dma; /* for this itd */
+ union ehci_shadow itd_next; /* ptr to periodic q entry */
+
+ struct urb *urb;
+ struct ehci_iso_stream *stream; /* endpoint's queue */
+ struct list_head itd_list; /* list of stream's itds */
+
+ /* any/all hw_transactions here may be used by that urb */
+ unsigned frame; /* where scheduled */
+ unsigned pg;
+ unsigned index[8]; /* in urb->iso_frame_desc */
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.4
+ * siTD, aka split-transaction isochronous Transfer Descriptor
+ * ... describe full speed iso xfers through TT in hubs
+ * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
+ */
+struct ehci_sitd {
+ /* first part defined by EHCI spec */
+ __hc32 hw_next;
+/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
+ __hc32 hw_fullspeed_ep; /* EHCI table 3-9 */
+ __hc32 hw_uframe; /* EHCI table 3-10 */
+ __hc32 hw_results; /* EHCI table 3-11 */
+#define SITD_IOC (1 << 31) /* interrupt on completion */
+#define SITD_PAGE (1 << 30) /* buffer 0/1 */
+#define SITD_LENGTH(x) (0x3ff & ((x)>>16))
+#define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */
+#define SITD_STS_ERR (1 << 6) /* error from TT */
+#define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */
+#define SITD_STS_BABBLE (1 << 4) /* device was babbling */
+#define SITD_STS_XACT (1 << 3) /* illegal IN response */
+#define SITD_STS_MMF (1 << 2) /* incomplete split transaction */
+#define SITD_STS_STS (1 << 1) /* split transaction state */
+
+#define SITD_ACTIVE(ehci) cpu_to_hc32(ehci, SITD_STS_ACTIVE)
+
+ __hc32 hw_buf [2]; /* EHCI table 3-12 */
+ __hc32 hw_backpointer; /* EHCI table 3-13 */
+ __hc32 hw_buf_hi [2]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t sitd_dma;
+ union ehci_shadow sitd_next; /* ptr to periodic q entry */
+
+ struct urb *urb;
+ struct ehci_iso_stream *stream; /* endpoint's queue */
+ struct list_head sitd_list; /* list of stream's sitds */
+ unsigned frame;
+ unsigned index;
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.96 Section 3.7
+ * Periodic Frame Span Traversal Node (FSTN)
+ *
+ * Manages split interrupt transactions (using TT) that span frame boundaries
+ * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
+ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
+ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
+ */
+struct ehci_fstn {
+ __hc32 hw_next; /* any periodic q entry */
+ __hc32 hw_prev; /* qh or EHCI_LIST_END */
+
+ /* the rest is HCD-private */
+ dma_addr_t fstn_dma;
+ union ehci_shadow fstn_next; /* ptr to periodic q entry */
+} __attribute__ ((aligned (32)));
+
+/*-------------------------------------------------------------------------*/
+
+/* Prepare the PORTSC wakeup flags during controller suspend/resume */
+
+#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \
+ ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup);
+
+#define ehci_prepare_ports_for_controller_resume(ehci) \
+ ehci_adjust_port_wakeup_flags(ehci, false, false);
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
+
+/*
+ * Some EHCI controllers have a Transaction Translator built into the
+ * root hub. This is a non-standard feature. Each controller will need
+ * to add code to the following inline functions, and call them as
+ * needed (mostly in root hub code).
+ */
+
+#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
+
+/* Returns the speed of a device attached to a port on the root hub. */
+static inline unsigned int
+ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
+{
+ if (ehci_is_TDI(ehci)) {
+ switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
+ case 0:
+ return 0;
+ case 1:
+ return USB_PORT_STAT_LOW_SPEED;
+ case 2:
+ default:
+ return USB_PORT_STAT_HIGH_SPEED;
+ }
+ }
+ return USB_PORT_STAT_HIGH_SPEED;
+}
+
+#else
+
+#define ehci_is_TDI(e) (0)
+
+#define ehci_port_speed(ehci, portsc) USB_PORT_STAT_HIGH_SPEED
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PPC_83xx
+/* Some Freescale processors have an erratum in which the TT
+ * port number in the queue head was 0..N-1 instead of 1..N.
+ */
+#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug)
+#else
+#define ehci_has_fsl_portno_bug(e) (0)
+#endif
+
+/*
+ * While most USB host controllers implement their registers in
+ * little-endian format, a minority (celleb companion chip) implement
+ * them in big endian format.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ * ehci_big_endian_capbase is a special quirk for controllers that
+ * implement the HC capability registers as separate registers and not
+ * as fields of a 32-bit register.
+ */
+
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio)
+#define ehci_big_endian_capbase(e) ((e)->big_endian_capbase)
+#else
+#define ehci_big_endian_mmio(e) 0
+#define ehci_big_endian_capbase(e) 0
+#endif
+
+/*
+ * Big-endian read/write functions are arch-specific.
+ * Other arches can be added if/when they're needed.
+ */
+#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
+#define readl_be(addr) __raw_readl((__force unsigned *)addr)
+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
+#endif
+
+static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
+ __u32 __iomem * regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ return ehci_big_endian_mmio(ehci) ?
+ readl_be(regs) :
+ readl(regs);
+#else
+ return readl(regs);
+#endif
+}
+
+static inline void ehci_writel(const struct ehci_hcd *ehci,
+ const unsigned int val, __u32 __iomem *regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ ehci_big_endian_mmio(ehci) ?
+ writel_be(val, regs) :
+ writel(val, regs);
+#else
+ writel(val, regs);
+#endif
+}
+
+/*
+ * On certain ppc-44x SoC there is a HW issue, that could only worked around with
+ * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
+ * Other common bits are dependent on has_amcc_usb23 quirk flag.
+ */
+#ifdef CONFIG_44x
+static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
+{
+ u32 hc_control;
+
+ hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
+ if (operational)
+ hc_control |= OHCI_USB_OPER;
+ else
+ hc_control |= OHCI_USB_SUSPEND;
+
+ writel_be(hc_control, ehci->ohci_hcctrl_reg);
+ (void) readl_be(ehci->ohci_hcctrl_reg);
+}
+#else
+static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
+{ }
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The AMCC 440EPx not only implements its EHCI registers in big-endian
+ * format, but also its DMA data structures (descriptors).
+ *
+ * EHCI controllers accessed through PCI work normally (little-endian
+ * everywhere), so we won't bother supporting a BE-only mode for now.
+ */
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+#define ehci_big_endian_desc(e) ((e)->big_endian_desc)
+
+/* cpu to ehci */
+static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
+{
+ return ehci_big_endian_desc(ehci)
+ ? (__force __hc32)cpu_to_be32(x)
+ : (__force __hc32)cpu_to_le32(x);
+}
+
+/* ehci to cpu */
+static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
+{
+ return ehci_big_endian_desc(ehci)
+ ? be32_to_cpu((__force __be32)x)
+ : le32_to_cpu((__force __le32)x);
+}
+
+static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
+{
+ return ehci_big_endian_desc(ehci)
+ ? be32_to_cpup((__force __be32 *)x)
+ : le32_to_cpup((__force __le32 *)x);
+}
+
+#else
+
+/* cpu to ehci */
+static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
+{
+ return cpu_to_le32(x);
+}
+
+/* ehci to cpu */
+static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
+{
+ return le32_to_cpu(x);
+}
+
+static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
+{
+ return le32_to_cpup(x);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PCI
+
+/* For working around the MosChip frame-index-register bug */
+static unsigned ehci_read_frame_index(struct ehci_hcd *ehci);
+
+#else
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+ return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef DEBUG
+#define STUB_DEBUG_FILES
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*/
+
+#endif /* __LINUX_EHCI_HCD_H */