zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/usb/host/ohci-pci.c b/ap/os/linux/linux-3.4.x/drivers/usb/host/ohci-pci.c
new file mode 100644
index 0000000..6847b93
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/usb/host/ohci-pci.c
@@ -0,0 +1,422 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * [ Initialisation is based on Linus' ]
+ * [ uhci code and gregs ohci fragments ]
+ * [ (C) Copyright 1999 Linus Torvalds ]
+ * [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ * PCI Bus Glue
+ *
+ * This file is licenced under the GPL.
+ */
+
+#ifndef CONFIG_PCI
+#error "This file is PCI bus glue. CONFIG_PCI must be defined."
+#endif
+
+#include <linux/pci.h>
+#include <linux/io.h>
+
+
+/*-------------------------------------------------------------------------*/
+
+static int broken_suspend(struct usb_hcd *hcd)
+{
+ device_init_wakeup(&hcd->self.root_hub->dev, 0);
+ return 0;
+}
+
+/* AMD 756, for most chips (early revs), corrupts register
+ * values on read ... so enable the vendor workaround.
+ */
+static int ohci_quirk_amd756(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags = OHCI_QUIRK_AMD756;
+ ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
+
+ /* also erratum 10 (suspend/resume issues) */
+ return broken_suspend(hcd);
+}
+
+/* Apple's OHCI driver has a lot of bizarre workarounds
+ * for this chip. Evidently control and bulk lists
+ * can get confused. (B&W G3 models, and ...)
+ */
+static int ohci_quirk_opti(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
+
+ return 0;
+}
+
+/* Check for NSC87560. We have to look at the bridge (fn1) to
+ * identify the USB (fn2). This quirk might apply to more or
+ * even all NSC stuff.
+ */
+static int ohci_quirk_ns(struct usb_hcd *hcd)
+{
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ struct pci_dev *b;
+
+ b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
+ if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
+ && b->vendor == PCI_VENDOR_ID_NS) {
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_SUPERIO;
+ ohci_dbg (ohci, "Using NSC SuperIO setup\n");
+ }
+ pci_dev_put(b);
+
+ return 0;
+}
+
+/* Check for Compaq's ZFMicro chipset, which needs short
+ * delays before control or bulk queues get re-activated
+ * in finish_unlinks()
+ */
+static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_ZFMICRO;
+ ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
+
+ return 0;
+}
+
+/* Check for Toshiba SCC OHCI which has big endian registers
+ * and little endian in memory data structures
+ */
+static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ /* That chip is only present in the southbridge of some
+ * cell based platforms which are supposed to select
+ * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
+ * that was the case though.
+ */
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ ohci->flags |= OHCI_QUIRK_BE_MMIO;
+ ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
+ return 0;
+#else
+ ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
+ return -ENXIO;
+#endif
+}
+
+/* Check for NEC chip and apply quirk for allegedly lost interrupts.
+ */
+
+static void ohci_quirk_nec_worker(struct work_struct *work)
+{
+ struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
+ int status;
+
+ status = ohci_init(ohci);
+ if (status != 0) {
+ ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+ "ohci_init", status);
+ return;
+ }
+
+ status = ohci_restart(ohci);
+ if (status != 0)
+ ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+ "ohci_restart", status);
+}
+
+static int ohci_quirk_nec(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_NEC;
+ INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
+ ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
+
+ return 0;
+}
+
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct pci_dev *amd_smbus_dev;
+ u8 rev;
+
+ if (usb_amd_find_chipset_info())
+ ohci->flags |= OHCI_QUIRK_AMD_PLL;
+
+ amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+ if (!amd_smbus_dev)
+ return 0;
+
+ rev = amd_smbus_dev->revision;
+
+ /* SB800 needs pre-fetch fix */
+ if ((rev >= 0x40) && (rev <= 0x4f)) {
+ ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
+ ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
+ }
+
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+
+ return 0;
+}
+
+static void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+ struct pci_dev *pdev;
+ u16 misc;
+
+ pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
+ pci_read_config_word(pdev, 0x50, &misc);
+ if (on == 0)
+ pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+ else
+ pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+
+/* List of quirks for OHCI */
+static const struct pci_device_id ohci_pci_quirks[] = {
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
+ .driver_data = (unsigned long)ohci_quirk_amd756,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
+ .driver_data = (unsigned long)ohci_quirk_opti,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
+ .driver_data = (unsigned long)ohci_quirk_ns,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
+ .driver_data = (unsigned long)ohci_quirk_zfmicro,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
+ .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
+ .driver_data = (unsigned long)ohci_quirk_nec,
+ },
+ {
+ /* Toshiba portege 4000 */
+ .vendor = PCI_VENDOR_ID_AL,
+ .device = 0x5237,
+ .subvendor = PCI_VENDOR_ID_TOSHIBA,
+ .subdevice = 0x0004,
+ .driver_data = (unsigned long) broken_suspend,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
+ .driver_data = (unsigned long) broken_suspend,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+ .driver_data = (unsigned long)ohci_quirk_amd700,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+ .driver_data = (unsigned long)ohci_quirk_amd700,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+ .driver_data = (unsigned long)ohci_quirk_amd700,
+ },
+
+ /* FIXME for some of the early AMD 760 southbridges, OHCI
+ * won't work at all. blacklist them.
+ */
+
+ {},
+};
+
+static int ohci_pci_reset (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret = 0;
+
+ if (hcd->self.controller) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ const struct pci_device_id *quirk_id;
+
+ quirk_id = pci_match_id(ohci_pci_quirks, pdev);
+ if (quirk_id != NULL) {
+ int (*quirk)(struct usb_hcd *ohci);
+ quirk = (void *)quirk_id->driver_data;
+ ret = quirk(hcd);
+ }
+ }
+ if (ret == 0) {
+ ohci_hcd_init (ohci);
+ return ohci_init (ohci);
+ }
+ return ret;
+}
+
+
+static int __devinit ohci_pci_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
+
+#ifdef CONFIG_PM /* avoid warnings about unused pdev */
+ if (hcd->self.controller) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /* RWC may not be set for add-in PCI cards, since boot
+ * firmware probably ignored them. This transfers PCI
+ * PM wakeup capabilities.
+ */
+ if (device_can_wakeup(&pdev->dev))
+ ohci->hc_control |= OHCI_CTRL_RWC;
+ }
+#endif /* CONFIG_PM */
+
+ ret = ohci_run (ohci);
+ if (ret < 0) {
+ ohci_err (ohci, "can't start\n");
+ ohci_stop (hcd);
+ }
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ unsigned long flags;
+ int rc = 0;
+
+ /* Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ */
+ spin_lock_irqsave (&ohci->lock, flags);
+ if (ohci->rh_state != OHCI_RH_SUSPENDED) {
+ rc = -EINVAL;
+ goto bail;
+ }
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+ (void)ohci_readl(ohci, &ohci->regs->intrdisable);
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ bail:
+ spin_unlock_irqrestore (&ohci->lock, flags);
+
+ return rc;
+}
+
+
+static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ /* Make sure resume from hibernation re-enumerates everything */
+ if (hibernated)
+ ohci_usb_reset(hcd_to_ohci(hcd));
+
+ ohci_finish_controller_resume(hcd);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "OHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY | HCD_USB11,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ohci_pci_reset,
+ .start = ohci_pci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+#ifdef CONFIG_PM
+ .pci_suspend = ohci_pci_suspend,
+ .pci_resume = ohci_pci_resume,
+#endif
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+static const struct pci_device_id pci_ids [] = { {
+ /* handle any USB OHCI controller */
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
+ .driver_data = (unsigned long) &ohci_pci_hc_driver,
+ }, {
+ /* The device in the ConneXT I/O hub has no class reg */
+ PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+ .driver_data = (unsigned long) &ohci_pci_hc_driver,
+ }, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ohci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+
+ .probe = usb_hcd_pci_probe,
+ .remove = usb_hcd_pci_remove,
+ .shutdown = usb_hcd_pci_shutdown,
+
+#ifdef CONFIG_PM
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
+#endif
+};