zte's code,first commit
Change-Id: I9a04da59e459a9bc0d67f101f700d9d7dc8d681b
diff --git a/ap/os/linux/linux-3.4.x/drivers/usb/host/uhci-hcd.h b/ap/os/linux/linux-3.4.x/drivers/usb/host/uhci-hcd.h
new file mode 100644
index 0000000..7af2b70
--- /dev/null
+++ b/ap/os/linux/linux-3.4.x/drivers/usb/host/uhci-hcd.h
@@ -0,0 +1,664 @@
+#ifndef __LINUX_UHCI_HCD_H
+#define __LINUX_UHCI_HCD_H
+
+#include <linux/list.h>
+#include <linux/usb.h>
+
+#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
+#define PIPE_DEVEP_MASK 0x0007ff00
+
+
+/*
+ * Universal Host Controller Interface data structures and defines
+ */
+
+/* Command register */
+#define USBCMD 0
+#define USBCMD_RS 0x0001 /* Run/Stop */
+#define USBCMD_HCRESET 0x0002 /* Host reset */
+#define USBCMD_GRESET 0x0004 /* Global reset */
+#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define USBCMD_FGR 0x0010 /* Force Global Resume */
+#define USBCMD_SWDBG 0x0020 /* SW Debug mode */
+#define USBCMD_CF 0x0040 /* Config Flag (sw only) */
+#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS 2
+#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
+#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
+#define USBSTS_RD 0x0004 /* Resume Detect */
+#define USBSTS_HSE 0x0008 /* Host System Error: PCI problems */
+#define USBSTS_HCPE 0x0010 /* Host Controller Process Error:
+ * the schedule is buggy */
+#define USBSTS_HCH 0x0020 /* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR 4
+#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */
+#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */
+#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */
+#define USBINTR_SP 0x0008 /* Short packet interrupt enable */
+
+#define USBFRNUM 6
+#define USBFLBASEADD 8
+#define USBSOF 12
+#define USBSOF_DEFAULT 64 /* Frame length is exactly 1 ms */
+
+/* USB port status and control registers */
+#define USBPORTSC1 16
+#define USBPORTSC2 18
+#define USBPORTSC_CCS 0x0001 /* Current Connect Status
+ * ("device present") */
+#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
+#define USBPORTSC_PE 0x0004 /* Port Enable */
+#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
+#define USBPORTSC_DPLUS 0x0010 /* D+ high (line status) */
+#define USBPORTSC_DMINUS 0x0020 /* D- high (line status) */
+#define USBPORTSC_RD 0x0040 /* Resume Detect */
+#define USBPORTSC_RES1 0x0080 /* reserved, always 1 */
+#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */
+#define USBPORTSC_PR 0x0200 /* Port Reset */
+/* OC and OCC from Intel 430TX and later (not UHCI 1.1d spec) */
+#define USBPORTSC_OC 0x0400 /* Over Current condition */
+#define USBPORTSC_OCC 0x0800 /* Over Current Change R/WC */
+#define USBPORTSC_SUSP 0x1000 /* Suspend */
+#define USBPORTSC_RES2 0x2000 /* reserved, write zeroes */
+#define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */
+#define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */
+
+/* PCI legacy support register */
+#define USBLEGSUP 0xc0
+#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
+#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
+#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
+
+/* PCI Intel-specific resume-enable register */
+#define USBRES_INTEL 0xc4
+#define USBPORT1EN 0x01
+#define USBPORT2EN 0x02
+
+#define UHCI_PTR_BITS(uhci) cpu_to_hc32((uhci), 0x000F)
+#define UHCI_PTR_TERM(uhci) cpu_to_hc32((uhci), 0x0001)
+#define UHCI_PTR_QH(uhci) cpu_to_hc32((uhci), 0x0002)
+#define UHCI_PTR_DEPTH(uhci) cpu_to_hc32((uhci), 0x0004)
+#define UHCI_PTR_BREADTH(uhci) cpu_to_hc32((uhci), 0x0000)
+
+#define UHCI_NUMFRAMES 1024 /* in the frame list [array] */
+#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
+#define CAN_SCHEDULE_FRAMES 1000 /* how far in the future frames
+ * can be scheduled */
+#define MAX_PHASE 32 /* Periodic scheduling length */
+
+/* When no queues need Full-Speed Bandwidth Reclamation,
+ * delay this long before turning FSBR off */
+#define FSBR_OFF_DELAY msecs_to_jiffies(10)
+
+/* If a queue hasn't advanced after this much time, assume it is stuck */
+#define QH_WAIT_TIMEOUT msecs_to_jiffies(200)
+
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given UHCI_BIG_ENDIAN_DESC), depending on
+ * the host controller implementation.
+ *
+ * To facilitate the strongest possible byte-order checking from "sparse"
+ * and so on, we use __leXX unless that's not practical.
+ */
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_DESC
+typedef __u32 __bitwise __hc32;
+typedef __u16 __bitwise __hc16;
+#else
+#define __hc32 __le32
+#define __hc16 __le16
+#endif
+
+/*
+ * Queue Headers
+ */
+
+/*
+ * One role of a QH is to hold a queue of TDs for some endpoint. One QH goes
+ * with each endpoint, and qh->element (updated by the HC) is either:
+ * - the next unprocessed TD in the endpoint's queue, or
+ * - UHCI_PTR_TERM (when there's no more traffic for this endpoint).
+ *
+ * The other role of a QH is to serve as a "skeleton" framelist entry, so we
+ * can easily splice a QH for some endpoint into the schedule at the right
+ * place. Then qh->element is UHCI_PTR_TERM.
+ *
+ * In the schedule, qh->link maintains a list of QHs seen by the HC:
+ * skel1 --> ep1-qh --> ep2-qh --> ... --> skel2 --> ...
+ *
+ * qh->node is the software equivalent of qh->link. The differences
+ * are that the software list is doubly-linked and QHs in the UNLINKING
+ * state are on the software list but not the hardware schedule.
+ *
+ * For bookkeeping purposes we maintain QHs even for Isochronous endpoints,
+ * but they never get added to the hardware schedule.
+ */
+#define QH_STATE_IDLE 1 /* QH is not being used */
+#define QH_STATE_UNLINKING 2 /* QH has been removed from the
+ * schedule but the hardware may
+ * still be using it */
+#define QH_STATE_ACTIVE 3 /* QH is on the schedule */
+
+struct uhci_qh {
+ /* Hardware fields */
+ __hc32 link; /* Next QH in the schedule */
+ __hc32 element; /* Queue element (TD) pointer */
+
+ /* Software fields */
+ dma_addr_t dma_handle;
+
+ struct list_head node; /* Node in the list of QHs */
+ struct usb_host_endpoint *hep; /* Endpoint information */
+ struct usb_device *udev;
+ struct list_head queue; /* Queue of urbps for this QH */
+ struct uhci_td *dummy_td; /* Dummy TD to end the queue */
+ struct uhci_td *post_td; /* Last TD completed */
+
+ struct usb_iso_packet_descriptor *iso_packet_desc;
+ /* Next urb->iso_frame_desc entry */
+ unsigned long advance_jiffies; /* Time of last queue advance */
+ unsigned int unlink_frame; /* When the QH was unlinked */
+ unsigned int period; /* For Interrupt and Isochronous QHs */
+ short phase; /* Between 0 and period-1 */
+ short load; /* Periodic time requirement, in us */
+ unsigned int iso_frame; /* Frame # for iso_packet_desc */
+
+ int state; /* QH_STATE_xxx; see above */
+ int type; /* Queue type (control, bulk, etc) */
+ int skel; /* Skeleton queue number */
+
+ unsigned int initial_toggle:1; /* Endpoint's current toggle value */
+ unsigned int needs_fixup:1; /* Must fix the TD toggle values */
+ unsigned int is_stopped:1; /* Queue was stopped by error/unlink */
+ unsigned int wait_expired:1; /* QH_WAIT_TIMEOUT has expired */
+ unsigned int bandwidth_reserved:1; /* Periodic bandwidth has
+ * been allocated */
+} __attribute__((aligned(16)));
+
+/*
+ * We need a special accessor for the element pointer because it is
+ * subject to asynchronous updates by the controller.
+ */
+#define qh_element(qh) ACCESS_ONCE((qh)->element)
+
+#define LINK_TO_QH(uhci, qh) (UHCI_PTR_QH((uhci)) | \
+ cpu_to_hc32((uhci), (qh)->dma_handle))
+
+
+/*
+ * Transfer Descriptors
+ */
+
+/*
+ * for TD <status>:
+ */
+#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */
+#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */
+#define TD_CTRL_C_ERR_SHIFT 27
+#define TD_CTRL_LS (1 << 26) /* Low Speed Device */
+#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */
+#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */
+#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */
+#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */
+#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */
+#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */
+#define TD_CTRL_NAK (1 << 19) /* NAK Received */
+#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */
+#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */
+#define TD_CTRL_ACTLEN_MASK 0x7FF /* actual length, encoded as n - 1 */
+
+#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
+ TD_CTRL_BABBLE | TD_CTRL_CRCTIME | \
+ TD_CTRL_BITSTUFF)
+
+#define uhci_maxerr(err) ((err) << TD_CTRL_C_ERR_SHIFT)
+#define uhci_status_bits(ctrl_sts) ((ctrl_sts) & 0xF60000)
+#define uhci_actual_length(ctrl_sts) (((ctrl_sts) + 1) & \
+ TD_CTRL_ACTLEN_MASK) /* 1-based */
+
+/*
+ * for TD <info>: (a.k.a. Token)
+ */
+#define td_token(uhci, td) hc32_to_cpu((uhci), (td)->token)
+#define TD_TOKEN_DEVADDR_SHIFT 8
+#define TD_TOKEN_TOGGLE_SHIFT 19
+#define TD_TOKEN_TOGGLE (1 << 19)
+#define TD_TOKEN_EXPLEN_SHIFT 21
+#define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n-1 */
+#define TD_TOKEN_PID_MASK 0xFF
+
+#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \
+ TD_TOKEN_EXPLEN_SHIFT)
+
+#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \
+ 1) & TD_TOKEN_EXPLEN_MASK)
+#define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1)
+#define uhci_endpoint(token) (((token) >> 15) & 0xf)
+#define uhci_devaddr(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f)
+#define uhci_devep(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7ff)
+#define uhci_packetid(token) ((token) & TD_TOKEN_PID_MASK)
+#define uhci_packetout(token) (uhci_packetid(token) != USB_PID_IN)
+#define uhci_packetin(token) (uhci_packetid(token) == USB_PID_IN)
+
+/*
+ * The documentation says "4 words for hardware, 4 words for software".
+ *
+ * That's silly, the hardware doesn't care. The hardware only cares that
+ * the hardware words are 16-byte aligned, and we can have any amount of
+ * sw space after the TD entry.
+ *
+ * td->link points to either another TD (not necessarily for the same urb or
+ * even the same endpoint), or nothing (PTR_TERM), or a QH.
+ */
+struct uhci_td {
+ /* Hardware fields */
+ __hc32 link;
+ __hc32 status;
+ __hc32 token;
+ __hc32 buffer;
+
+ /* Software fields */
+ dma_addr_t dma_handle;
+
+ struct list_head list;
+
+ int frame; /* for iso: what frame? */
+ struct list_head fl_list;
+} __attribute__((aligned(16)));
+
+/*
+ * We need a special accessor for the control/status word because it is
+ * subject to asynchronous updates by the controller.
+ */
+#define td_status(uhci, td) hc32_to_cpu((uhci), \
+ ACCESS_ONCE((td)->status))
+
+#define LINK_TO_TD(uhci, td) (cpu_to_hc32((uhci), (td)->dma_handle))
+
+
+/*
+ * Skeleton Queue Headers
+ */
+
+/*
+ * The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for
+ * automatic queuing. To make it easy to insert entries into the schedule,
+ * we have a skeleton of QHs for each predefined Interrupt latency.
+ * Asynchronous QHs (low-speed control, full-speed control, and bulk)
+ * go onto the period-1 interrupt list, since they all get accessed on
+ * every frame.
+ *
+ * When we want to add a new QH, we add it to the list starting from the
+ * appropriate skeleton QH. For instance, the schedule can look like this:
+ *
+ * skel int128 QH
+ * dev 1 interrupt QH
+ * dev 5 interrupt QH
+ * skel int64 QH
+ * skel int32 QH
+ * ...
+ * skel int1 + async QH
+ * dev 5 low-speed control QH
+ * dev 1 bulk QH
+ * dev 2 bulk QH
+ *
+ * There is a special terminating QH used to keep full-speed bandwidth
+ * reclamation active when no full-speed control or bulk QHs are linked
+ * into the schedule. It has an inactive TD (to work around a PIIX bug,
+ * see the Intel errata) and it points back to itself.
+ *
+ * There's a special skeleton QH for Isochronous QHs which never appears
+ * on the schedule. Isochronous TDs go on the schedule before the
+ * the skeleton QHs. The hardware accesses them directly rather than
+ * through their QH, which is used only for bookkeeping purposes.
+ * While the UHCI spec doesn't forbid the use of QHs for Isochronous,
+ * it doesn't use them either. And the spec says that queues never
+ * advance on an error completion status, which makes them totally
+ * unsuitable for Isochronous transfers.
+ *
+ * There's also a special skeleton QH used for QHs which are in the process
+ * of unlinking and so may still be in use by the hardware. It too never
+ * appears on the schedule.
+ */
+
+#define UHCI_NUM_SKELQH 11
+#define SKEL_UNLINK 0
+#define skel_unlink_qh skelqh[SKEL_UNLINK]
+#define SKEL_ISO 1
+#define skel_iso_qh skelqh[SKEL_ISO]
+ /* int128, int64, ..., int1 = 2, 3, ..., 9 */
+#define SKEL_INDEX(exponent) (9 - exponent)
+#define SKEL_ASYNC 9
+#define skel_async_qh skelqh[SKEL_ASYNC]
+#define SKEL_TERM 10
+#define skel_term_qh skelqh[SKEL_TERM]
+
+/* The following entries refer to sublists of skel_async_qh */
+#define SKEL_LS_CONTROL 20
+#define SKEL_FS_CONTROL 21
+#define SKEL_FSBR SKEL_FS_CONTROL
+#define SKEL_BULK 22
+
+/*
+ * The UHCI controller and root hub
+ */
+
+/*
+ * States for the root hub:
+ *
+ * To prevent "bouncing" in the presence of electrical noise,
+ * when there are no devices attached we delay for 1 second in the
+ * RUNNING_NODEVS state before switching to the AUTO_STOPPED state.
+ *
+ * (Note that the AUTO_STOPPED state won't be necessary once the hub
+ * driver learns to autosuspend.)
+ */
+enum uhci_rh_state {
+ /* In the following states the HC must be halted.
+ * These two must come first. */
+ UHCI_RH_RESET,
+ UHCI_RH_SUSPENDED,
+
+ UHCI_RH_AUTO_STOPPED,
+ UHCI_RH_RESUMING,
+
+ /* In this state the HC changes from running to halted,
+ * so it can legally appear either way. */
+ UHCI_RH_SUSPENDING,
+
+ /* In the following states it's an error if the HC is halted.
+ * These two must come last. */
+ UHCI_RH_RUNNING, /* The normal state */
+ UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */
+};
+
+/*
+ * The full UHCI controller information:
+ */
+struct uhci_hcd {
+
+ /* debugfs */
+ struct dentry *dentry;
+
+ /* Grabbed from PCI */
+ unsigned long io_addr;
+
+ /* Used when registers are memory mapped */
+ void __iomem *regs;
+
+ struct dma_pool *qh_pool;
+ struct dma_pool *td_pool;
+
+ struct uhci_td *term_td; /* Terminating TD, see UHCI bug */
+ struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QHs */
+ struct uhci_qh *next_qh; /* Next QH to scan */
+
+ spinlock_t lock;
+
+ dma_addr_t frame_dma_handle; /* Hardware frame list */
+ __hc32 *frame;
+ void **frame_cpu; /* CPU's frame list */
+
+ enum uhci_rh_state rh_state;
+ unsigned long auto_stop_time; /* When to AUTO_STOP */
+
+ unsigned int frame_number; /* As of last check */
+ unsigned int is_stopped;
+#define UHCI_IS_STOPPED 9999 /* Larger than a frame # */
+ unsigned int last_iso_frame; /* Frame of last scan */
+ unsigned int cur_iso_frame; /* Frame for current scan */
+
+ unsigned int scan_in_progress:1; /* Schedule scan is running */
+ unsigned int need_rescan:1; /* Redo the schedule scan */
+ unsigned int dead:1; /* Controller has died */
+ unsigned int RD_enable:1; /* Suspended root hub with
+ Resume-Detect interrupts
+ enabled */
+ unsigned int is_initialized:1; /* Data structure is usable */
+ unsigned int fsbr_is_on:1; /* FSBR is turned on */
+ unsigned int fsbr_is_wanted:1; /* Does any URB want FSBR? */
+ unsigned int fsbr_expiring:1; /* FSBR is timing out */
+
+ struct timer_list fsbr_timer; /* For turning off FBSR */
+
+ /* Silicon quirks */
+ unsigned int oc_low:1; /* OverCurrent bit active low */
+ unsigned int wait_for_hp:1; /* Wait for HP port reset */
+ unsigned int big_endian_mmio:1; /* Big endian registers */
+ unsigned int big_endian_desc:1; /* Big endian descriptors */
+
+ /* Support for port suspend/resume/reset */
+ unsigned long port_c_suspend; /* Bit-arrays of ports */
+ unsigned long resuming_ports;
+ unsigned long ports_timeout; /* Time to stop signalling */
+
+ struct list_head idle_qh_list; /* Where the idle QHs live */
+
+ int rh_numports; /* Number of root-hub ports */
+
+ wait_queue_head_t waitqh; /* endpoint_disable waiters */
+ int num_waiting; /* Number of waiters */
+
+ int total_load; /* Sum of array values */
+ short load[MAX_PHASE]; /* Periodic allocations */
+
+ /* Reset host controller */
+ void (*reset_hc) (struct uhci_hcd *uhci);
+ int (*check_and_reset_hc) (struct uhci_hcd *uhci);
+ /* configure_hc should perform arch specific settings, if needed */
+ void (*configure_hc) (struct uhci_hcd *uhci);
+ /* Check for broken resume detect interrupts */
+ int (*resume_detect_interrupts_are_broken) (struct uhci_hcd *uhci);
+ /* Check for broken global suspend */
+ int (*global_suspend_mode_is_broken) (struct uhci_hcd *uhci);
+};
+
+/* Convert between a usb_hcd pointer and the corresponding uhci_hcd */
+static inline struct uhci_hcd *hcd_to_uhci(struct usb_hcd *hcd)
+{
+ return (struct uhci_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci)
+{
+ return container_of((void *) uhci, struct usb_hcd, hcd_priv);
+}
+
+#define uhci_dev(u) (uhci_to_hcd(u)->self.controller)
+
+/* Utility macro for comparing frame numbers */
+#define uhci_frame_before_eq(f1, f2) (0 <= (int) ((f2) - (f1)))
+
+
+/*
+ * Private per-URB data
+ */
+struct urb_priv {
+ struct list_head node; /* Node in the QH's urbp list */
+
+ struct urb *urb;
+
+ struct uhci_qh *qh; /* QH for this URB */
+ struct list_head td_list;
+
+ unsigned fsbr:1; /* URB wants FSBR */
+};
+
+
+/* Some special IDs */
+
+#define PCI_VENDOR_ID_GENESYS 0x17a0
+#define PCI_DEVICE_ID_GL880S_UHCI 0x8083
+
+/*
+ * Functions used to access controller registers. The UCHI spec says that host
+ * controller I/O registers are mapped into PCI I/O space. For non-PCI hosts
+ * we use memory mapped registers.
+ */
+
+#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
+/* Support PCI only */
+static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
+{
+ return inl(uhci->io_addr + reg);
+}
+
+static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
+{
+ outl(val, uhci->io_addr + reg);
+}
+
+static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
+{
+ return inw(uhci->io_addr + reg);
+}
+
+static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
+{
+ outw(val, uhci->io_addr + reg);
+}
+
+static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
+{
+ return inb(uhci->io_addr + reg);
+}
+
+static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
+{
+ outb(val, uhci->io_addr + reg);
+}
+
+#else
+/* Support non-PCI host controllers */
+#ifdef CONFIG_PCI
+/* Support PCI and non-PCI host controllers */
+#define uhci_has_pci_registers(u) ((u)->io_addr != 0)
+#else
+/* Support non-PCI host controllers only */
+#define uhci_has_pci_registers(u) 0
+#endif
+
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+/* Support (non-PCI) big endian host controllers */
+#define uhci_big_endian_mmio(u) ((u)->big_endian_mmio)
+#else
+#define uhci_big_endian_mmio(u) 0
+#endif
+
+static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
+{
+ if (uhci_has_pci_registers(uhci))
+ return inl(uhci->io_addr + reg);
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+ else if (uhci_big_endian_mmio(uhci))
+ return readl_be(uhci->regs + reg);
+#endif
+ else
+ return readl(uhci->regs + reg);
+}
+
+static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
+{
+ if (uhci_has_pci_registers(uhci))
+ outl(val, uhci->io_addr + reg);
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+ else if (uhci_big_endian_mmio(uhci))
+ writel_be(val, uhci->regs + reg);
+#endif
+ else
+ writel(val, uhci->regs + reg);
+}
+
+static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
+{
+ if (uhci_has_pci_registers(uhci))
+ return inw(uhci->io_addr + reg);
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+ else if (uhci_big_endian_mmio(uhci))
+ return readw_be(uhci->regs + reg);
+#endif
+ else
+ return readw(uhci->regs + reg);
+}
+
+static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
+{
+ if (uhci_has_pci_registers(uhci))
+ outw(val, uhci->io_addr + reg);
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+ else if (uhci_big_endian_mmio(uhci))
+ writew_be(val, uhci->regs + reg);
+#endif
+ else
+ writew(val, uhci->regs + reg);
+}
+
+static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
+{
+ if (uhci_has_pci_registers(uhci))
+ return inb(uhci->io_addr + reg);
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+ else if (uhci_big_endian_mmio(uhci))
+ return readb_be(uhci->regs + reg);
+#endif
+ else
+ return readb(uhci->regs + reg);
+}
+
+static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
+{
+ if (uhci_has_pci_registers(uhci))
+ outb(val, uhci->io_addr + reg);
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
+ else if (uhci_big_endian_mmio(uhci))
+ writeb_be(val, uhci->regs + reg);
+#endif
+ else
+ writeb(val, uhci->regs + reg);
+}
+#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+
+/*
+ * The GRLIB GRUSBHC controller can use big endian format for its descriptors.
+ *
+ * UHCI controllers accessed through PCI work normally (little-endian
+ * everywhere), so we don't bother supporting a BE-only mode.
+ */
+#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_DESC
+#define uhci_big_endian_desc(u) ((u)->big_endian_desc)
+
+/* cpu to uhci */
+static inline __hc32 cpu_to_hc32(const struct uhci_hcd *uhci, const u32 x)
+{
+ return uhci_big_endian_desc(uhci)
+ ? (__force __hc32)cpu_to_be32(x)
+ : (__force __hc32)cpu_to_le32(x);
+}
+
+/* uhci to cpu */
+static inline u32 hc32_to_cpu(const struct uhci_hcd *uhci, const __hc32 x)
+{
+ return uhci_big_endian_desc(uhci)
+ ? be32_to_cpu((__force __be32)x)
+ : le32_to_cpu((__force __le32)x);
+}
+
+#else
+/* cpu to uhci */
+static inline __hc32 cpu_to_hc32(const struct uhci_hcd *uhci, const u32 x)
+{
+ return cpu_to_le32(x);
+}
+
+/* uhci to cpu */
+static inline u32 hc32_to_cpu(const struct uhci_hcd *uhci, const __hc32 x)
+{
+ return le32_to_cpu(x);
+}
+#endif
+
+#endif